Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 133.1 >
edited by Herong Lu
on 2022/07/23 17:57
To version < 160.1 >
edited by Bei Jinggeng
on 2023/06/09 17:10
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Bei
Content
... ... @@ -1,4 +1,4 @@
1 -0
1 +
2 2  
3 3  **Table of Contents:**
4 4  
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 31  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,35 +40,35 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
55 +
65 65  == 1.3  Specification ==
66 66  
58 +
67 67  * CPU: 32-bit 48 MHz
68 68  * Flash: 256KB
69 69  * RAM: 64KB
70 -* Input Power Range: 1.8v ~~ 3.7v
71 -* Power Consumption: < 4uA.
62 +* Input Power Range: 5v
72 72  * Frequency Range: 150 MHz ~~ 960 MHz
73 73  * Maximum Power +22 dBm constant RF output
74 74  * High sensitivity: -148 dBm
... ... @@ -80,572 +80,436 @@
80 80  ** Operating: 10 ~~ 95% (Non-Condensing)
81 81  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 82  * LoRa Rx current: <9 mA
83 -* I/O Voltage: 3.3v
84 84  
85 -== 1.4  AT Command ==
86 86  
76 +== 1.4  Pin Mapping & LED ==
87 87  
88 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 89  
79 +[[image:image-20220813183239-3.png||height="526" width="662"]]
90 90  
91 91  
92 -== 1.5  Dimension ==
82 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
93 93  
94 -[[image:image-20220718094750-3.png]]
95 95  
85 +(((
86 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
87 +)))
96 96  
97 97  
98 -== 1.6  Pin Mapping ==
90 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
99 99  
100 -[[image:image-20220720111850-1.png]]
101 101  
93 +[[image:image-20220723100027-1.png]]
102 102  
103 103  
104 -== 1.7  Land Pattern ==
96 +Open the serial port tool
105 105  
106 -[[image:image-20220517072821-2.png]]
98 +[[image:image-20220602161617-8.png]]
107 107  
108 108  
101 +[[image:image-20220602161718-9.png||height="457" width="800"]]
109 109  
110 -= 2.  LA66 LoRaWAN Shield =
111 111  
112 112  
113 -== 2.1  Overview ==
105 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
114 114  
115 115  
116 -(((
117 -[[image:image-20220715000826-2.png||height="145" width="220"]]
118 -)))
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
119 119  
120 -(((
121 -
122 -)))
123 123  
124 -(((
125 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 -)))
111 +[[image:image-20220602161935-10.png||height="498" width="800"]]
127 127  
128 -(((
129 -(((
130 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 -)))
132 -)))
133 133  
134 -(((
135 -(((
136 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 -)))
138 -)))
139 139  
140 -(((
141 -(((
142 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 -)))
144 -)))
115 +(% style="color:blue" %)**3.  See Uplink Command**
145 145  
146 -(((
147 -(((
148 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 -)))
150 -)))
151 151  
118 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
152 152  
120 +example: AT+SENDB=01,02,8,05820802581ea0a5
153 153  
154 -== 2.2  Features ==
122 +[[image:image-20220602162157-11.png||height="497" width="800"]]
155 155  
156 -* Arduino Shield base on LA66 LoRaWAN module
157 -* Support LoRaWAN v1.0.4 protocol
158 -* Support peer-to-peer protocol
159 -* TCXO crystal to ensure RF performance on low temperature
160 -* SMA connector
161 -* Available in different frequency LoRaWAN frequency bands.
162 -* World-wide unique OTAA keys.
163 -* AT Command via UART-TTL interface
164 -* Firmware upgradable via UART interface
165 -* Ultra-long RF range
166 166  
167 -== 2.3  Specification ==
168 168  
169 -* CPU: 32-bit 48 MHz
170 -* Flash: 256KB
171 -* RAM: 64KB
172 -* Input Power Range: 1.8v ~~ 3.7v
173 -* Power Consumption: < 4uA.
174 -* Frequency Range: 150 MHz ~~ 960 MHz
175 -* Maximum Power +22 dBm constant RF output
176 -* High sensitivity: -148 dBm
177 -* Temperature:
178 -** Storage: -55 ~~ +125℃
179 -** Operating: -40 ~~ +85℃
180 -* Humidity:
181 -** Storage: 5 ~~ 95% (Non-Condensing)
182 -** Operating: 10 ~~ 95% (Non-Condensing)
183 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
184 -* LoRa Rx current: <9 mA
185 -* I/O Voltage: 3.3v
126 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
186 186  
187 -== 2.4  LED ==
188 188  
189 -~1. The LED lights up red when there is an upstream data packet
190 -2. When the network is successfully connected, the green light will be on for 5 seconds
191 -3. Purple light on when receiving downlink data packets
129 +[[image:image-20220817093644-1.png]]
192 192  
193 193  
194 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
132 +== 1.6  Example: How to join helium ==
195 195  
196 -Show connection diagram：
197 197  
198 -[[image:image-20220723170210-2.png||height="908" width="681"]]
199 199  
200 -1.open Arduino IDE
136 +(% style="color:blue" %)**1.  Create a new device.**
201 201  
202 -[[image:image-20220723170545-4.png]]
203 203  
204 -2.Open project
139 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
205 205  
206 -[[image:image-20220723170750-5.png||height="533" width="930"]]
207 207  
208 -3.Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
209 209  
210 -[[image:image-20220723171228-6.png]]
143 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
211 211  
212 -4.After the upload is successful, open the serial port monitoring and send the AT command
213 213  
214 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
146 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
215 215  
216 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
217 217  
218 -1.Open project
219 219  
220 -[[image:image-20220723172502-8.png]]
150 +(% style="color:blue" %)**3.  Use AT commands.**
221 221  
222 -2.Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
223 223  
224 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
153 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
225 225  
226 226  
227 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
228 228  
229 -1.Open project
157 +(% style="color:blue" %)**4.  Use the serial port tool**
230 230  
231 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
232 232  
233 -2.Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
160 +[[image:image-20220909151517-2.png||height="543" width="708"]]
234 234  
235 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
236 236  
237 -3.Integration into Node-red via TTNV3
238 238  
239 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
164 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
240 240  
241 -[[image:image-20220723175700-12.png||height="602" width="995"]]
242 242  
243 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
167 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
244 244  
245 245  
246 -=== 2.8.1  Items needed for update ===
247 247  
248 -1. LA66 LoRaWAN Shield
249 -1. Arduino
250 -1. USB TO TTL Adapter
171 +(% style="color:blue" %)**6.  Network successfully.**
251 251  
252 -[[image:image-20220602100052-2.png||height="385" width="600"]]
253 253  
174 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
254 254  
255 -=== 2.8.2  Connection ===
256 256  
257 257  
258 -[[image:image-20220602101311-3.png||height="276" width="600"]]
178 +(% style="color:blue" %)**7.  Send uplink using command**
259 259  
260 260  
261 -(((
262 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
263 -)))
181 +[[image:image-20220912085244-1.png]]
264 264  
265 -(((
266 -(% style="background-color:yellow" %)**GND  <-> GND
267 -TXD  <->  TXD
268 -RXD  <->  RXD**
269 -)))
270 270  
184 +[[image:image-20220912085307-2.png]]
271 271  
272 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
273 273  
274 -Connect USB TTL Adapter to PC after connecting the wires
275 275  
188 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
276 276  
277 -[[image:image-20220602102240-4.png||height="304" width="600"]]
278 278  
191 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
279 279  
280 -=== 2.8.3  Upgrade steps ===
281 281  
194 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
282 282  
283 -==== 1.  Switch SW1 to put in ISP position ====
196 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
284 284  
285 285  
286 -[[image:image-20220602102824-5.png||height="306" width="600"]]
199 +(% style="color:red" %)**Preconditions:**
287 287  
201 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
288 288  
203 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
289 289  
290 -==== 2.  Press the RST switch once ====
291 291  
292 292  
293 -[[image:image-20220602104701-12.png||height="285" width="600"]]
207 +(% style="color:blue" %)**Steps for usage:**
294 294  
209 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
295 295  
211 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
296 296  
297 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
213 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
298 298  
299 299  
300 -(((
301 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
302 -)))
216 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
303 303  
304 304  
305 -[[image:image-20220602103227-6.png]]
219 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
306 306  
307 307  
308 -[[image:image-20220602103357-7.png]]
222 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
309 309  
310 310  
225 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
311 311  
312 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
313 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
314 314  
228 +[[image:image-20220723100439-2.png]]
315 315  
316 -[[image:image-20220602103844-8.png]]
317 317  
318 318  
232 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
319 319  
320 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
321 -(% style="color:blue" %)**3. Select the bin file to burn**
322 322  
235 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
323 323  
324 -[[image:image-20220602104144-9.png]]
237 + (% style="background-color:yellow" %)**apt update**
325 325  
239 + (% style="background-color:yellow" %)**apt install minicom**
326 326  
327 -[[image:image-20220602104251-10.png]]
328 328  
242 +Use minicom to connect to the RPI's terminal
329 329  
330 -[[image:image-20220602104402-11.png]]
244 +[[image:image-20220602153146-3.png||height="439" width="500"]]
331 331  
332 332  
333 333  
334 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
335 -(% style="color:blue" %)**4. Click to start the download**
248 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
336 336  
337 -[[image:image-20220602104923-13.png]]
338 338  
251 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
339 339  
340 340  
341 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
342 -(% style="color:blue" %)**5. Check update process**
254 +[[image:image-20220602154928-5.png||height="436" width="500"]]
343 343  
344 344  
345 -[[image:image-20220602104948-14.png]]
346 346  
258 +(% style="color:blue" %)**4.  Send Uplink message**
347 347  
348 348  
349 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
350 -(% style="color:blue" %)**The following picture shows that the burning is successful**
261 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
351 351  
352 -[[image:image-20220602105251-15.png]]
263 +example: AT+SENDB=01,02,8,05820802581ea0a5
353 353  
354 354  
266 +[[image:image-20220602160339-6.png||height="517" width="600"]]
355 355  
356 -= 3.  LA66 USB LoRaWAN Adapter =
357 357  
358 358  
359 -== 3.1  Overview ==
270 +Check to see if TTN received the message
360 360  
361 361  
362 -[[image:image-20220715001142-3.png||height="145" width="220"]]
273 +[[image:image-20220602160627-7.png||height="369" width="800"]]
363 363  
364 364  
365 -(((
366 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
367 -)))
276 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
368 368  
369 -(((
370 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
371 -)))
278 +=== 1.9.1  Hardware and Software Connection ===
372 372  
373 -(((
374 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
375 -)))
376 376  
377 -(((
378 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
379 -)))
380 380  
381 -(((
382 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
383 -)))
282 +==== (% style="color:blue" %)**Overview：**(%%) ====
384 384  
385 385  
386 -
387 -== 3.2  Features ==
388 -
389 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
390 -* Ultra-long RF range
391 -* Support LoRaWAN v1.0.4 protocol
392 -* Support peer-to-peer protocol
393 -* TCXO crystal to ensure RF performance on low temperature
394 -* Spring RF antenna
395 -* Available in different frequency LoRaWAN frequency bands.
396 -* World-wide unique OTAA keys.
397 -* AT Command via UART-TTL interface
398 -* Firmware upgradable via UART interface
399 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
400 -
401 -== 3.3  Specification ==
402 -
403 -* CPU: 32-bit 48 MHz
404 -* Flash: 256KB
405 -* RAM: 64KB
406 -* Input Power Range: 5v
407 -* Frequency Range: 150 MHz ~~ 960 MHz
408 -* Maximum Power +22 dBm constant RF output
409 -* High sensitivity: -148 dBm
410 -* Temperature:
411 -** Storage: -55 ~~ +125℃
412 -** Operating: -40 ~~ +85℃
413 -* Humidity:
414 -** Storage: 5 ~~ 95% (Non-Condensing)
415 -** Operating: 10 ~~ 95% (Non-Condensing)
416 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
417 -* LoRa Rx current: <9 mA
418 -
419 -== 3.4  Pin Mapping & LED ==
420 -
421 -
422 -
423 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
424 -
425 -
426 426  (((
427 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
286 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
287 +
288 +* Send real-time location information of mobile phone to LoRaWAN network.
289 +* Check LoRaWAN network signal strengh.
290 +* Manually send messages to LoRaWAN network.
428 428  )))
429 429  
430 430  
431 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
432 432  
433 433  
434 -[[image:image-20220723100027-1.png]]
296 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
435 435  
436 436  
437 -Open the serial port tool
299 +A USB to Type-C adapter is needed to connect to a Mobile phone.
438 438  
439 -[[image:image-20220602161617-8.png]]
301 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
440 440  
441 -[[image:image-20220602161718-9.png||height="457" width="800"]]
303 +[[image:image-20220813174353-2.png||height="360" width="313"]]
442 442  
443 443  
444 444  
445 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
307 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
446 446  
447 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
448 448  
310 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
449 449  
450 -[[image:image-20220602161935-10.png||height="498" width="800"]]
451 451  
313 +[[image:image-20220813173738-1.png]]
452 452  
453 453  
454 -(% style="color:blue" %)**3. See Uplink Command**
455 455  
456 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
317 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
457 457  
458 -example: AT+SENDB=01,02,8,05820802581ea0a5
459 459  
460 -[[image:image-20220602162157-11.png||height="497" width="800"]]
320 +Function and page introduction
461 461  
462 462  
323 +[[image:image-20220723113448-7.png||height="995" width="450"]]
463 463  
464 -(% style="color:blue" %)**4. Check to see if TTN received the message**
465 465  
466 -[[image:image-20220602162331-12.png||height="420" width="800"]]
326 +**Block Explain:**
467 467  
328 +1.  Display LA66 USB LoRaWAN Module connection status
468 468  
330 +2.  Check and reconnect
469 469  
470 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
332 +3.  Turn send timestamps on or off
471 471  
334 +4.  Display LoRaWan connection status
472 472  
473 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
336 +5.  Check LoRaWan connection status
474 474  
475 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
338 +6.  The RSSI value of the node when the ACK is received
476 476  
477 -(% style="color:red" %)**Preconditions:**
340 +7.  Node's Signal Strength Icon
478 478  
479 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
342 +8.  Configure Location Uplink Interval
480 480  
481 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
344 +9.  AT command input box
482 482  
346 +10.  Send Button:  Send input box info to LA66 USB Adapter
483 483  
348 +11.  Output Log from LA66 USB adapter
484 484  
485 -(% style="color:blue" %)**Steps for usage:**
350 +12.  clear log button
486 486  
487 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
352 +13.  exit button
488 488  
489 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
490 490  
491 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
492 492  
356 +LA66 USB LoRaWAN Module not connected
493 493  
494 494  
495 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
359 +[[image:image-20220723110520-5.png||height="677" width="508"]]
496 496  
497 497  
498 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
499 499  
363 +Connect LA66 USB LoRaWAN Module
500 500  
501 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
502 502  
503 -[[image:image-20220723100439-2.png]]
366 +[[image:image-20220723110626-6.png||height="681" width="511"]]
504 504  
505 505  
369 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
506 506  
507 -(% style="color:blue" %)**2. Install Minicom in RPi.**
508 508  
509 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
372 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
510 510  
511 - (% style="background-color:yellow" %)**apt update**
512 512  
513 - (% style="background-color:yellow" %)**apt install minicom**
375 +[[image:image-20220723134549-8.png]]
514 514  
515 515  
516 -Use minicom to connect to the RPI's terminal
517 517  
518 -[[image:image-20220602153146-3.png||height="439" width="500"]]
379 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
519 519  
520 520  
382 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
521 521  
522 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
384 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
523 523  
524 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
386 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
525 525  
388 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
526 526  
527 -[[image:image-20220602154928-5.png||height="436" width="500"]]
528 528  
391 +Example output in NodeRed is as below:
529 529  
393 +[[image:image-20220723144339-1.png]]
530 530  
531 -(% style="color:blue" %)**4. Send Uplink message**
532 532  
533 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
396 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
534 534  
535 -example: AT+SENDB=01,02,8,05820802581ea0a5
536 536  
399 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
537 537  
538 -[[image:image-20220602160339-6.png||height="517" width="600"]]
401 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
539 539  
403 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
540 540  
405 +[[image:image-20220723150132-2.png]]
541 541  
542 -Check to see if TTN received the message
407 +==== ** Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** ====
543 543  
544 -[[image:image-20220602160627-7.png||height="369" width="800"]]
409 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
545 545  
411 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
546 546  
413 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
547 547  
548 -== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
415 +**2.  Select the COM port corresponding to USB TTL**
549 549  
550 -=== 3.8.1 DRAGINO-LA66-APP ===
417 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
551 551  
552 -[[image:image-20220723102027-3.png]]
419 +**3.  Select the bin file to burn**
553 553  
554 -==== Overview： ====
421 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
555 555  
556 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.
423 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
557 557  
558 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
425 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
559 559  
560 -==== Conditions of Use： ====
427 +**4.  Click to start the download**
561 561  
562 -Requires a type-c to USB adapter
429 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
563 563  
564 -[[image:image-20220723104754-4.png]]
431 +**5.  Check update process**
565 565  
566 -==== Use of APP: ====
433 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
567 567  
568 -Function and page introduction
435 +**The following picture shows that the burning is successful**
569 569  
570 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
437 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
571 571  
572 -1.Display LA66 USB LoRaWAN Module connection status
439 += 2.  FAQ =
573 573  
574 -2.Check and reconnect
441 +== 2.1  How to Compile Source Code for LA66? ==
575 575  
576 -3.Turn send timestamps on or off
577 577  
578 -4.Display LoRaWan connection status
444 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
579 579  
580 -5.Check LoRaWan connection status
581 581  
582 -6.The RSSI value of the node when the ACK is received
447 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
583 583  
584 -7.Node's Signal Strength Icon
585 585  
586 -8.Set the packet sending interval of the node in seconds
450 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
587 587  
588 -9.AT command input box
589 589  
590 -10.Send AT command button
453 += 3.  Order Info =
591 591  
592 -11.Node log box
593 593  
594 -12.clear log button
456 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
595 595  
596 -13.exit button
597 597  
598 -LA66 USB LoRaWAN Module not connected
459 +(% style="color:blue" %)**XXX**(%%): The default frequency band
599 599  
600 -[[image:image-20220723110520-5.png||height="903" width="677"]]
461 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
462 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
463 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
464 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
465 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
466 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
467 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
468 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
469 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
601 601  
602 -Connect LA66 USB LoRaWAN Module
603 603  
604 -[[image:image-20220723110626-6.png||height="906" width="680"]]
472 += 4.  Reference =
605 605  
606 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Module and integrate it into Node-RED ===
607 607  
608 -1.Register LA66 USB LoRaWAN Module to TTNV3
475 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
476 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
609 609  
610 -[[image:image-20220723134549-8.png]]
611 611  
612 -2.Open Node-RED,And import the JSON file to generate the flow
479 += 5.  FCC Statement =
613 613  
614 -Sample JSON file please go to this link to download：放置JSON文件的链接
615 615  
616 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
482 +(% style="color:red" %)**FCC Caution:**
617 617  
618 -The following is the positioning effect map
484 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
619 619  
620 -[[image:image-20220723144339-1.png]]
486 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
621 621  
622 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
623 623  
624 -The LA66 USB LoRaWAN Module is the same as the LA66 LoRaWAN Shield update method
489 +(% style="color:red" %)**IMPORTANT NOTE: **
625 625  
626 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
491 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
627 627  
628 -[[image:image-20220723150132-2.png]]
493 +—Reorient or relocate the receiving antenna.
629 629  
495 +—Increase the separation between the equipment and receiver.
630 630  
631 -= 4.  Order Info =
497 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
632 632  
499 +—Consult the dealer or an experienced radio/TV technician for help.
633 633  
634 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
635 635  
502 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
636 636  
637 -(% style="color:blue" %)**XXX**(%%): The default frequency band
504 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
638 638  
639 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
640 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
641 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
642 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
643 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
644 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
645 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
646 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
647 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
648 -
649 -= 5.  Reference =
650 -
651 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
506 +
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0