Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 130.1 >
edited by Herong Lu
on 2022/07/23 17:39
To version < 159.2 >
edited by Xiaoling
on 2022/12/29 09:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Xiaoling
Content
... ... @@ -1,4 +1,4 @@
1 -0
1 +
2 2  
3 3  **Table of Contents:**
4 4  
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 31  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,35 +40,36 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
55 +
56 +
65 65  == 1.3  Specification ==
66 66  
59 +
67 67  * CPU: 32-bit 48 MHz
68 68  * Flash: 256KB
69 69  * RAM: 64KB
70 -* Input Power Range: 1.8v ~~ 3.7v
71 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
72 72  * Frequency Range: 150 MHz ~~ 960 MHz
73 73  * Maximum Power +22 dBm constant RF output
74 74  * High sensitivity: -148 dBm
... ... @@ -80,552 +80,408 @@
80 80  ** Operating: 10 ~~ 95% (Non-Condensing)
81 81  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 82  * LoRa Rx current: <9 mA
83 -* I/O Voltage: 3.3v
84 84  
85 -== 1.4  AT Command ==
86 86  
87 87  
88 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 +== 1.4  Pin Mapping & LED ==
89 89  
90 90  
81 +[[image:image-20220813183239-3.png||height="526" width="662"]]
91 91  
92 -== 1.5  Dimension ==
93 93  
94 -[[image:image-20220718094750-3.png]]
84 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
95 95  
96 96  
97 -
98 -== 1.6  Pin Mapping ==
99 -
100 -[[image:image-20220720111850-1.png]]
101 -
102 -
103 -
104 -== 1.7  Land Pattern ==
105 -
106 -[[image:image-20220517072821-2.png]]
107 -
108 -
109 -
110 -= 2.  LA66 LoRaWAN Shield =
111 -
112 -
113 -== 2.1  Overview ==
114 -
115 -
116 116  (((
117 -[[image:image-20220715000826-2.png||height="145" width="220"]]
88 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
118 118  )))
119 119  
120 -(((
121 -
122 -)))
123 123  
124 -(((
125 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 -)))
92 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
127 127  
128 -(((
129 -(((
130 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 -)))
132 -)))
133 133  
134 -(((
135 -(((
136 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 -)))
138 -)))
95 +[[image:image-20220723100027-1.png]]
139 139  
140 -(((
141 -(((
142 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 -)))
144 -)))
145 145  
146 -(((
147 -(((
148 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 -)))
150 -)))
98 +Open the serial port tool
151 151  
100 +[[image:image-20220602161617-8.png]]
152 152  
153 153  
154 -== 2.2  Features ==
103 +[[image:image-20220602161718-9.png||height="457" width="800"]]
155 155  
156 -* Arduino Shield base on LA66 LoRaWAN module
157 -* Support LoRaWAN v1.0.4 protocol
158 -* Support peer-to-peer protocol
159 -* TCXO crystal to ensure RF performance on low temperature
160 -* SMA connector
161 -* Available in different frequency LoRaWAN frequency bands.
162 -* World-wide unique OTAA keys.
163 -* AT Command via UART-TTL interface
164 -* Firmware upgradable via UART interface
165 -* Ultra-long RF range
166 166  
167 -== 2.3  Specification ==
168 168  
169 -* CPU: 32-bit 48 MHz
170 -* Flash: 256KB
171 -* RAM: 64KB
172 -* Input Power Range: 1.8v ~~ 3.7v
173 -* Power Consumption: < 4uA.
174 -* Frequency Range: 150 MHz ~~ 960 MHz
175 -* Maximum Power +22 dBm constant RF output
176 -* High sensitivity: -148 dBm
177 -* Temperature:
178 -** Storage: -55 ~~ +125℃
179 -** Operating: -40 ~~ +85℃
180 -* Humidity:
181 -** Storage: 5 ~~ 95% (Non-Condensing)
182 -** Operating: 10 ~~ 95% (Non-Condensing)
183 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
184 -* LoRa Rx current: <9 mA
185 -* I/O Voltage: 3.3v
107 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
186 186  
187 -== 2.4  LED ==
188 188  
189 -~1. The LED lights up red when there is an upstream data packet
190 -2. When the network is successfully connected, the green light will be on for 5 seconds
191 -3. Purple light on when receiving downlink data packets
110 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
192 192  
193 193  
194 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
113 +[[image:image-20220602161935-10.png||height="498" width="800"]]
195 195  
196 -Show connection diagram：
197 197  
198 -[[image:image-20220723170210-2.png||height="908" width="681"]]
199 199  
200 -1.open Arduino IDE
117 +(% style="color:blue" %)**3.  See Uplink Command**
201 201  
202 -[[image:image-20220723170545-4.png]]
203 203  
204 -2.Open project
120 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
205 205  
206 -[[image:image-20220723170750-5.png]]
122 +example: AT+SENDB=01,02,8,05820802581ea0a5
207 207  
208 -3.Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
124 +[[image:image-20220602162157-11.png||height="497" width="800"]]
209 209  
210 -[[image:image-20220723171228-6.png]]
211 211  
212 -4.After the upload is successful, open the serial port monitoring and send the AT command
213 213  
128 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
214 214  
215 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
216 216  
131 +[[image:image-20220817093644-1.png]]
217 217  
218 218  
219 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
134 +== 1.6  Example: How to join helium ==
220 220  
221 221  
222 222  
223 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
138 +(% style="color:blue" %)**1.  Create a new device.**
224 224  
225 225  
226 -=== 2.8.1  Items needed for update ===
141 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
227 227  
228 -1. LA66 LoRaWAN Shield
229 -1. Arduino
230 -1. USB TO TTL Adapter
231 231  
232 -[[image:image-20220602100052-2.png||height="385" width="600"]]
233 233  
145 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
234 234  
235 -=== 2.8.2  Connection ===
236 236  
148 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
237 237  
238 -[[image:image-20220602101311-3.png||height="276" width="600"]]
239 239  
240 240  
241 -(((
242 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
243 -)))
152 +(% style="color:blue" %)**3.  Use AT commands.**
244 244  
245 -(((
246 -(% style="background-color:yellow" %)**GND  <-> GND
247 -TXD  <->  TXD
248 -RXD  <->  RXD**
249 -)))
250 250  
155 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
251 251  
252 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
253 253  
254 -Connect USB TTL Adapter to PC after connecting the wires
255 255  
159 +(% style="color:blue" %)**4.  Use the serial port tool**
256 256  
257 -[[image:image-20220602102240-4.png||height="304" width="600"]]
258 258  
162 +[[image:image-20220909151517-2.png||height="543" width="708"]]
259 259  
260 -=== 2.8.3  Upgrade steps ===
261 261  
262 262  
263 -==== 1.  Switch SW1 to put in ISP position ====
166 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
264 264  
265 265  
266 -[[image:image-20220602102824-5.png||height="306" width="600"]]
169 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
267 267  
268 268  
269 269  
270 -==== 2.  Press the RST switch once ====
173 +(% style="color:blue" %)**6.  Network successfully.**
271 271  
272 272  
273 -[[image:image-20220602104701-12.png||height="285" width="600"]]
176 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
274 274  
275 275  
276 276  
277 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
180 +(% style="color:blue" %)**7.  Send uplink using command**
278 278  
279 279  
280 -(((
281 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
282 -)))
183 +[[image:image-20220912085244-1.png]]
283 283  
284 284  
285 -[[image:image-20220602103227-6.png]]
186 +[[image:image-20220912085307-2.png]]
286 286  
287 287  
288 -[[image:image-20220602103357-7.png]]
289 289  
190 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
290 290  
291 291  
292 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
293 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
193 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
294 294  
295 295  
296 -[[image:image-20220602103844-8.png]]
196 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
297 297  
198 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
298 298  
299 299  
300 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
301 -(% style="color:blue" %)**3. Select the bin file to burn**
201 +(% style="color:red" %)**Preconditions:**
302 302  
203 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
303 303  
304 -[[image:image-20220602104144-9.png]]
205 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
305 305  
306 306  
307 -[[image:image-20220602104251-10.png]]
308 308  
209 +(% style="color:blue" %)**Steps for usage:**
309 309  
310 -[[image:image-20220602104402-11.png]]
211 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
311 311  
213 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
312 312  
215 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
313 313  
314 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
315 -(% style="color:blue" %)**4. Click to start the download**
316 316  
317 -[[image:image-20220602104923-13.png]]
218 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
318 318  
319 319  
221 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
320 320  
321 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
322 -(% style="color:blue" %)**5. Check update process**
323 323  
224 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
324 324  
325 -[[image:image-20220602104948-14.png]]
326 326  
227 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
327 327  
328 328  
329 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
330 -(% style="color:blue" %)**The following picture shows that the burning is successful**
230 +[[image:image-20220723100439-2.png]]
331 331  
332 -[[image:image-20220602105251-15.png]]
333 333  
334 334  
234 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
335 335  
336 -= 3.  LA66 USB LoRaWAN Adapter =
337 337  
237 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
338 338  
339 -== 3.1  Overview ==
239 + (% style="background-color:yellow" %)**apt update**
340 340  
241 + (% style="background-color:yellow" %)**apt install minicom**
341 341  
342 -[[image:image-20220715001142-3.png||height="145" width="220"]]
343 343  
244 +Use minicom to connect to the RPI's terminal
344 344  
345 -(((
346 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
347 -)))
246 +[[image:image-20220602153146-3.png||height="439" width="500"]]
348 348  
349 -(((
350 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
351 -)))
352 352  
353 -(((
354 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
355 -)))
356 356  
357 -(((
358 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
359 -)))
250 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
360 360  
361 -(((
362 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
363 -)))
364 364  
253 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
365 365  
366 366  
367 -== 3.2  Features ==
256 +[[image:image-20220602154928-5.png||height="436" width="500"]]
368 368  
369 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
370 -* Ultra-long RF range
371 -* Support LoRaWAN v1.0.4 protocol
372 -* Support peer-to-peer protocol
373 -* TCXO crystal to ensure RF performance on low temperature
374 -* Spring RF antenna
375 -* Available in different frequency LoRaWAN frequency bands.
376 -* World-wide unique OTAA keys.
377 -* AT Command via UART-TTL interface
378 -* Firmware upgradable via UART interface
379 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
380 380  
381 -== 3.3  Specification ==
382 382  
383 -* CPU: 32-bit 48 MHz
384 -* Flash: 256KB
385 -* RAM: 64KB
386 -* Input Power Range: 5v
387 -* Frequency Range: 150 MHz ~~ 960 MHz
388 -* Maximum Power +22 dBm constant RF output
389 -* High sensitivity: -148 dBm
390 -* Temperature:
391 -** Storage: -55 ~~ +125℃
392 -** Operating: -40 ~~ +85℃
393 -* Humidity:
394 -** Storage: 5 ~~ 95% (Non-Condensing)
395 -** Operating: 10 ~~ 95% (Non-Condensing)
396 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
397 -* LoRa Rx current: <9 mA
260 +(% style="color:blue" %)**4.  Send Uplink message**
398 398  
399 -== 3.4  Pin Mapping & LED ==
400 400  
263 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
401 401  
265 +example: AT+SENDB=01,02,8,05820802581ea0a5
402 402  
403 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
404 404  
268 +[[image:image-20220602160339-6.png||height="517" width="600"]]
405 405  
406 -(((
407 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
408 -)))
409 409  
410 410  
411 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
272 +Check to see if TTN received the message
412 412  
413 413  
414 -[[image:image-20220723100027-1.png]]
275 +[[image:image-20220602160627-7.png||height="369" width="800"]]
415 415  
416 416  
417 -Open the serial port tool
278 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
418 418  
419 -[[image:image-20220602161617-8.png]]
280 +=== 1.9.1  Hardware and Software Connection ===
420 420  
421 -[[image:image-20220602161718-9.png||height="457" width="800"]]
422 422  
423 423  
284 +==== (% style="color:blue" %)**Overview：**(%%) ====
424 424  
425 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
426 426  
427 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
287 +(((
288 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
428 428  
290 +* Send real-time location information of mobile phone to LoRaWAN network.
291 +* Check LoRaWAN network signal strengh.
292 +* Manually send messages to LoRaWAN network.
293 +)))
429 429  
430 -[[image:image-20220602161935-10.png||height="498" width="800"]]
431 431  
432 432  
433 433  
434 -(% style="color:blue" %)**3. See Uplink Command**
298 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
435 435  
436 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
437 437  
438 -example: AT+SENDB=01,02,8,05820802581ea0a5
301 +A USB to Type-C adapter is needed to connect to a Mobile phone.
439 439  
440 -[[image:image-20220602162157-11.png||height="497" width="800"]]
303 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
441 441  
305 +[[image:image-20220813174353-2.png||height="360" width="313"]]
442 442  
443 443  
444 -(% style="color:blue" %)**4. Check to see if TTN received the message**
445 445  
446 -[[image:image-20220602162331-12.png||height="420" width="800"]]
309 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
447 447  
448 448  
312 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
449 449  
450 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
451 451  
315 +[[image:image-20220813173738-1.png]]
452 452  
453 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
454 454  
455 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
456 456  
457 -(% style="color:red" %)**Preconditions:**
319 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
458 458  
459 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
460 460  
461 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
322 +Function and page introduction
462 462  
463 463  
325 +[[image:image-20220723113448-7.png||height="995" width="450"]]
464 464  
465 -(% style="color:blue" %)**Steps for usage:**
466 466  
467 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
328 +**Block Explain:**
468 468  
469 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
330 +1.  Display LA66 USB LoRaWAN Module connection status
470 470  
471 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
332 +2.  Check and reconnect
472 472  
334 +3.  Turn send timestamps on or off
473 473  
336 +4.  Display LoRaWan connection status
474 474  
475 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
338 +5.  Check LoRaWan connection status
476 476  
340 +6.  The RSSI value of the node when the ACK is received
477 477  
478 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
342 +7.  Node's Signal Strength Icon
479 479  
344 +8.  Configure Location Uplink Interval
480 480  
481 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
346 +9.  AT command input box
482 482  
483 -[[image:image-20220723100439-2.png]]
348 +10.  Send Button:  Send input box info to LA66 USB Adapter
484 484  
350 +11.  Output Log from LA66 USB adapter
485 485  
352 +12.  clear log button
486 486  
487 -(% style="color:blue" %)**2. Install Minicom in RPi.**
354 +13.  exit button
488 488  
489 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
490 490  
491 - (% style="background-color:yellow" %)**apt update**
492 492  
493 - (% style="background-color:yellow" %)**apt install minicom**
358 +LA66 USB LoRaWAN Module not connected
494 494  
495 495  
496 -Use minicom to connect to the RPI's terminal
361 +[[image:image-20220723110520-5.png||height="677" width="508"]]
497 497  
498 -[[image:image-20220602153146-3.png||height="439" width="500"]]
499 499  
500 500  
365 +Connect LA66 USB LoRaWAN Module
501 501  
502 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
503 503  
504 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
368 +[[image:image-20220723110626-6.png||height="681" width="511"]]
505 505  
506 506  
507 -[[image:image-20220602154928-5.png||height="436" width="500"]]
371 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
508 508  
509 509  
374 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
510 510  
511 -(% style="color:blue" %)**4. Send Uplink message**
512 512  
513 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
377 +[[image:image-20220723134549-8.png]]
514 514  
515 -example: AT+SENDB=01,02,8,05820802581ea0a5
516 516  
517 517  
518 -[[image:image-20220602160339-6.png||height="517" width="600"]]
381 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
519 519  
520 520  
384 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
521 521  
522 -Check to see if TTN received the message
386 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
523 523  
524 -[[image:image-20220602160627-7.png||height="369" width="800"]]
388 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
525 525  
390 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
526 526  
527 527  
528 -== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
393 +Example output in NodeRed is as below:
529 529  
530 -=== 3.8.1 DRAGINO-LA66-APP ===
395 +[[image:image-20220723144339-1.png]]
531 531  
532 -[[image:image-20220723102027-3.png]]
533 533  
534 -==== Overview： ====
398 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
535 535  
536 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.
537 537  
538 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
401 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
539 539  
540 -==== Conditions of Use： ====
403 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
541 541  
542 -Requires a type-c to USB adapter
405 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
543 543  
544 -[[image:image-20220723104754-4.png]]
407 +[[image:image-20220723150132-2.png]]
545 545  
546 -==== Use of APP: ====
547 547  
548 -Function and page introduction
410 += 2.  FAQ =
549 549  
550 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
412 +== 2.1  How to Compile Source Code for LA66? ==
551 551  
552 -1.Display LA66 USB LoRaWAN Module connection status
553 553  
554 -2.Check and reconnect
415 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
555 555  
556 -3.Turn send timestamps on or off
557 557  
558 -4.Display LoRaWan connection status
418 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
559 559  
560 -5.Check LoRaWan connection status
561 561  
562 -6.The RSSI value of the node when the ACK is received
421 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
563 563  
564 -7.Node's Signal Strength Icon
565 565  
566 -8.Set the packet sending interval of the node in seconds
424 += 3.  Order Info =
567 567  
568 -9.AT command input box
569 569  
570 -10.Send AT command button
427 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
571 571  
572 -11.Node log box
573 573  
574 -12.clear log button
430 +(% style="color:blue" %)**XXX**(%%): The default frequency band
575 575  
576 -13.exit button
432 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
433 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
434 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
435 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
436 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
437 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
438 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
439 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
440 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
577 577  
578 -LA66 USB LoRaWAN Module not connected
579 579  
580 -[[image:image-20220723110520-5.png||height="903" width="677"]]
581 581  
582 -Connect LA66 USB LoRaWAN Module
444 += 4.  Reference =
583 583  
584 -[[image:image-20220723110626-6.png||height="906" width="680"]]
585 585  
586 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Module and integrate it into Node-RED ===
447 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
448 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
587 587  
588 -1.Register LA66 USB LoRaWAN Module to TTNV3
589 589  
590 -[[image:image-20220723134549-8.png]]
591 591  
592 -2.Open Node-RED,And import the JSON file to generate the flow
452 += 5.  FCC Statement =
593 593  
594 -Sample JSON file please go to this link to download：放置JSON文件的链接
595 595  
596 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
455 +(% style="color:red" %)**FCC Caution:**
597 597  
598 -The following is the positioning effect map
457 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
599 599  
600 -[[image:image-20220723144339-1.png]]
459 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
601 601  
602 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
603 603  
604 -The LA66 USB LoRaWAN Module is the same as the LA66 LoRaWAN Shield update method
462 +(% style="color:red" %)**IMPORTANT NOTE: **
605 605  
606 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
464 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
607 607  
608 -[[image:image-20220723150132-2.png]]
466 +—Reorient or relocate the receiving antenna.
609 609  
468 +—Increase the separation between the equipment and receiver.
610 610  
611 -= 4.  Order Info =
470 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
612 612  
472 +—Consult the dealer or an experienced radio/TV technician for help.
613 613  
614 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
615 615  
475 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
616 616  
617 -(% style="color:blue" %)**XXX**(%%): The default frequency band
477 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
618 618  
619 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
620 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
621 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
622 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
623 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
624 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
625 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
626 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
627 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
628 -
629 -= 5.  Reference =
630 -
631 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
479 +
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0