Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 124.1 >
edited by Herong Lu
on 2022/07/23 17:12
To version < 169.2 >
edited by Xiaoling
on 2024/01/22 09:39
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Xiaoling
Content
... ... @@ -1,4 +1,4 @@
1 -0
1 +
2 2  
3 3  **Table of Contents:**
4 4  
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="194" width="294"]][[image:image-20240101111030-2.png]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 31  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,35 +40,34 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
55 -* Support LoRaWAN v1.0.4 protocol
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.3 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
65 65  == 1.3  Specification ==
66 66  
57 +
67 67  * CPU: 32-bit 48 MHz
68 68  * Flash: 256KB
69 69  * RAM: 64KB
70 -* Input Power Range: 1.8v ~~ 3.7v
71 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
72 72  * Frequency Range: 150 MHz ~~ 960 MHz
73 73  * Maximum Power +22 dBm constant RF output
74 74  * High sensitivity: -148 dBm
... ... @@ -80,532 +80,404 @@
80 80  ** Operating: 10 ~~ 95% (Non-Condensing)
81 81  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 82  * LoRa Rx current: <9 mA
83 -* I/O Voltage: 3.3v
84 84  
85 -== 1.4  AT Command ==
74 +== 1.4  Pin Mapping & LED ==
86 86  
87 87  
88 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
77 +[[image:image-20220813183239-3.png||height="526" width="662"]]
89 89  
90 90  
80 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
91 91  
92 -== 1.5  Dimension ==
93 93  
94 -[[image:image-20220718094750-3.png]]
95 -
96 -
97 -
98 -== 1.6  Pin Mapping ==
99 -
100 -[[image:image-20220720111850-1.png]]
101 -
102 -
103 -
104 -== 1.7  Land Pattern ==
105 -
106 -[[image:image-20220517072821-2.png]]
107 -
108 -
109 -
110 -= 2.  LA66 LoRaWAN Shield =
111 -
112 -
113 -== 2.1  Overview ==
114 -
115 -
116 116  (((
117 -[[image:image-20220715000826-2.png||height="145" width="220"]]
84 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
118 118  )))
119 119  
120 -(((
121 -
122 -)))
87 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
123 123  
124 -(((
125 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 -)))
89 +[[image:image-20220723100027-1.png]]
127 127  
128 -(((
129 -(((
130 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 -)))
132 -)))
133 133  
134 -(((
135 -(((
136 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 -)))
138 -)))
92 +Open the serial port tool
139 139  
140 -(((
141 -(((
142 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 -)))
144 -)))
94 +[[image:image-20220602161617-8.png]]
145 145  
146 -(((
147 -(((
148 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 -)))
150 -)))
151 151  
97 +[[image:image-20220602161718-9.png||height="457" width="800"]]
152 152  
153 153  
154 -== 2.2  Features ==
100 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
155 155  
156 -* Arduino Shield base on LA66 LoRaWAN module
157 -* Support LoRaWAN v1.0.4 protocol
158 -* Support peer-to-peer protocol
159 -* TCXO crystal to ensure RF performance on low temperature
160 -* SMA connector
161 -* Available in different frequency LoRaWAN frequency bands.
162 -* World-wide unique OTAA keys.
163 -* AT Command via UART-TTL interface
164 -* Firmware upgradable via UART interface
165 -* Ultra-long RF range
102 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
166 166  
167 -== 2.3  Specification ==
104 +[[image:image-20220602161935-10.png||height="498" width="800"]]
168 168  
169 -* CPU: 32-bit 48 MHz
170 -* Flash: 256KB
171 -* RAM: 64KB
172 -* Input Power Range: 1.8v ~~ 3.7v
173 -* Power Consumption: < 4uA.
174 -* Frequency Range: 150 MHz ~~ 960 MHz
175 -* Maximum Power +22 dBm constant RF output
176 -* High sensitivity: -148 dBm
177 -* Temperature:
178 -** Storage: -55 ~~ +125℃
179 -** Operating: -40 ~~ +85℃
180 -* Humidity:
181 -** Storage: 5 ~~ 95% (Non-Condensing)
182 -** Operating: 10 ~~ 95% (Non-Condensing)
183 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
184 -* LoRa Rx current: <9 mA
185 -* I/O Voltage: 3.3v
186 186  
187 -== 2.4  Pin Mapping & LED ==
107 +(% style="color:blue" %)**3.  See Uplink Command**
188 188  
109 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
189 189  
111 +example: AT+SENDB=01,02,8,05820802581ea0a5
190 190  
191 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
113 +[[image:image-20220602162157-11.png||height="497" width="800"]]
192 192  
193 193  
116 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
194 194  
195 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
118 +[[image:image-20220817093644-1.png]]
196 196  
197 197  
121 +== 1.6  Example: How to join helium ==
198 198  
199 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
200 200  
124 +(% style="color:blue" %)**1.  Create a new device.**
201 201  
126 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
202 202  
203 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
204 204  
129 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
205 205  
206 -=== 2.8.1  Items needed for update ===
131 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
207 207  
208 -1. LA66 LoRaWAN Shield
209 -1. Arduino
210 -1. USB TO TTL Adapter
211 211  
212 -[[image:image-20220602100052-2.png||height="385" width="600"]]
134 +(% style="color:blue" %)**3.  Use AT commands.**
213 213  
136 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
214 214  
215 -=== 2.8.2  Connection ===
216 216  
139 +(% style="color:blue" %)**4.  Use the serial port tool**
217 217  
218 -[[image:image-20220602101311-3.png||height="276" width="600"]]
141 +[[image:image-20220909151517-2.png||height="543" width="708"]]
219 219  
220 220  
221 -(((
222 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
223 -)))
144 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
224 224  
225 -(((
226 -(% style="background-color:yellow" %)**GND  <-> GND
227 -TXD  <->  TXD
228 -RXD  <->  RXD**
229 -)))
146 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
230 230  
231 231  
232 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
149 +(% style="color:blue" %)**6.  Network successfully.**
233 233  
234 -Connect USB TTL Adapter to PC after connecting the wires
151 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
235 235  
236 236  
237 -[[image:image-20220602102240-4.png||height="304" width="600"]]
154 +(% style="color:blue" %)**7.  Send uplink using command**
238 238  
156 +[[image:image-20220912085244-1.png]]
239 239  
240 -=== 2.8.3  Upgrade steps ===
158 +[[image:image-20220912085307-2.png]]
241 241  
242 242  
243 -==== 1.  Switch SW1 to put in ISP position ====
161 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
244 244  
245 245  
246 -[[image:image-20220602102824-5.png||height="306" width="600"]]
164 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
247 247  
248 248  
167 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
249 249  
250 -==== 2.  Press the RST switch once ====
169 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
251 251  
252 252  
253 -[[image:image-20220602104701-12.png||height="285" width="600"]]
172 +(% style="color:red" %)**Preconditions:**
254 254  
174 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
255 255  
176 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
256 256  
257 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
258 258  
179 +(% style="color:blue" %)**Steps for usage:**
259 259  
260 -(((
261 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
262 -)))
181 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
263 263  
183 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
264 264  
265 -[[image:image-20220602103227-6.png]]
185 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
266 266  
267 267  
268 -[[image:image-20220602103357-7.png]]
188 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
269 269  
270 270  
191 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
271 271  
272 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
273 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
274 274  
194 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
275 275  
276 -[[image:image-20220602103844-8.png]]
196 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
277 277  
198 +[[image:image-20220723100439-2.png]]
278 278  
279 279  
280 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
281 -(% style="color:blue" %)**3. Select the bin file to burn**
201 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
282 282  
203 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
283 283  
284 -[[image:image-20220602104144-9.png]]
205 + (% style="background-color:yellow" %)**apt update**
285 285  
207 + (% style="background-color:yellow" %)**apt install minicom**
286 286  
287 -[[image:image-20220602104251-10.png]]
209 +Use minicom to connect to the RPI's terminal
288 288  
211 +[[image:image-20220602153146-3.png||height="439" width="500"]]
289 289  
290 -[[image:image-20220602104402-11.png]]
291 291  
214 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
292 292  
216 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
293 293  
294 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
295 -(% style="color:blue" %)**4. Click to start the download**
218 +[[image:image-20220602154928-5.png||height="436" width="500"]]
296 296  
297 -[[image:image-20220602104923-13.png]]
298 298  
221 +(% style="color:blue" %)**4.  Send Uplink message**
299 299  
223 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
300 300  
301 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
302 -(% style="color:blue" %)**5. Check update process**
225 +example: AT+SENDB=01,02,8,05820802581ea0a5
303 303  
227 +[[image:image-20220602160339-6.png||height="517" width="600"]]
304 304  
305 -[[image:image-20220602104948-14.png]]
306 306  
230 +Check to see if TTN received the message
307 307  
308 308  
309 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
310 -(% style="color:blue" %)**The following picture shows that the burning is successful**
233 +[[image:image-20220602160627-7.png||height="369" width="800"]]
311 311  
312 -[[image:image-20220602105251-15.png]]
313 313  
236 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
314 314  
238 +=== 1.9.1  Hardware and Software Connection ===
315 315  
316 -= 3.  LA66 USB LoRaWAN Adapter =
317 317  
241 +==== (% style="color:blue" %)**Overview：**(%%) ====
318 318  
319 -== 3.1  Overview ==
320 -
321 -
322 -[[image:image-20220715001142-3.png||height="145" width="220"]]
323 -
324 -
325 325  (((
326 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
327 -)))
244 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
328 328  
329 -(((
330 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
246 +* Send real-time location information of mobile phone to LoRaWAN network.
247 +* Check LoRaWAN network signal strengh.
248 +* Manually send messages to LoRaWAN network.
331 331  )))
332 332  
333 -(((
334 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
335 -)))
336 336  
337 -(((
338 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
339 -)))
340 340  
341 -(((
342 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
343 -)))
253 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
344 344  
255 +A USB to Type-C adapter is needed to connect to a Mobile phone.
345 345  
257 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
346 346  
347 -== 3.2  Features ==
259 +[[image:image-20220813174353-2.png||height="360" width="313"]]
348 348  
349 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
350 -* Ultra-long RF range
351 -* Support LoRaWAN v1.0.4 protocol
352 -* Support peer-to-peer protocol
353 -* TCXO crystal to ensure RF performance on low temperature
354 -* Spring RF antenna
355 -* Available in different frequency LoRaWAN frequency bands.
356 -* World-wide unique OTAA keys.
357 -* AT Command via UART-TTL interface
358 -* Firmware upgradable via UART interface
359 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
360 360  
361 -== 3.3  Specification ==
262 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
362 362  
363 -* CPU: 32-bit 48 MHz
364 -* Flash: 256KB
365 -* RAM: 64KB
366 -* Input Power Range: 5v
367 -* Frequency Range: 150 MHz ~~ 960 MHz
368 -* Maximum Power +22 dBm constant RF output
369 -* High sensitivity: -148 dBm
370 -* Temperature:
371 -** Storage: -55 ~~ +125℃
372 -** Operating: -40 ~~ +85℃
373 -* Humidity:
374 -** Storage: 5 ~~ 95% (Non-Condensing)
375 -** Operating: 10 ~~ 95% (Non-Condensing)
376 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
377 -* LoRa Rx current: <9 mA
264 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
378 378  
379 -== 3.4  Pin Mapping & LED ==
266 +[[image:image-20220813173738-1.png]]
380 380  
381 381  
269 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
382 382  
383 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
271 +Function and page introduction:
384 384  
273 +[[image:image-20220723113448-7.png||height="995" width="450"]]
385 385  
386 -(((
387 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
388 -)))
389 389  
276 +(% style="color:blue" %)**Block Explain:**
390 390  
391 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
278 +1.  Display LA66 USB LoRaWAN Module connection status
392 392  
280 +2.  Check and reconnect
393 393  
394 -[[image:image-20220723100027-1.png]]
282 +3.  Turn send timestamps on or off
395 395  
284 +4.  Display LoRaWan connection status
396 396  
397 -Open the serial port tool
286 +5.  Check LoRaWan connection status
398 398  
399 -[[image:image-20220602161617-8.png]]
288 +6.  The RSSI value of the node when the ACK is received
400 400  
401 -[[image:image-20220602161718-9.png||height="457" width="800"]]
290 +7.  Node's Signal Strength Icon
402 402  
292 +8.  Configure Location Uplink Interval
403 403  
294 +9.  AT command input box
404 404  
405 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
296 +10.  Send Button:  Send input box info to LA66 USB Adapter
406 406  
407 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
298 +11.  Output Log from LA66 USB adapter
408 408  
300 +12.  clear log button
409 409  
410 -[[image:image-20220602161935-10.png||height="498" width="800"]]
302 +13.  exit button
411 411  
412 412  
305 +LA66 USB LoRaWAN Module not connected:
413 413  
414 -(% style="color:blue" %)**3. See Uplink Command**
307 +[[image:image-20220723110520-5.png||height="677" width="508"]]
415 415  
416 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
417 417  
418 -example: AT+SENDB=01,02,8,05820802581ea0a5
310 +Connect LA66 USB LoRaWAN Module:
419 419  
420 -[[image:image-20220602162157-11.png||height="497" width="800"]]
312 +[[image:image-20220723110626-6.png||height="681" width="511"]]
421 421  
422 422  
315 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
423 423  
424 -(% style="color:blue" %)**4. Check to see if TTN received the message**
425 425  
426 -[[image:image-20220602162331-12.png||height="420" width="800"]]
318 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
427 427  
428 428  
321 +[[image:image-20220723134549-8.png]]
429 429  
430 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
431 431  
432 432  
433 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
325 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
434 434  
435 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
436 436  
437 -(% style="color:red" %)**Preconditions:**
328 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
438 438  
439 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
330 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
440 440  
441 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
332 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
442 442  
334 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
443 443  
444 444  
445 -(% style="color:blue" %)**Steps for usage:**
337 +Example output in NodeRed is as below:
446 446  
447 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
339 +[[image:image-20220723144339-1.png]]
448 448  
449 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
450 450  
451 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
342 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
452 452  
453 453  
345 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
454 454  
455 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
347 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
456 456  
349 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
457 457  
458 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
351 +[[image:image-20220723150132-2.png]]
459 459  
460 460  
461 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
354 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
462 462  
463 -[[image:image-20220723100439-2.png]]
464 464  
357 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
465 465  
359 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
466 466  
467 -(% style="color:blue" %)**2. Install Minicom in RPi.**
361 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
468 468  
469 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
470 470  
471 - (% style="background-color:yellow" %)**apt update**
364 +**2.  Select the COM port corresponding to USB TTL**
472 472  
473 - (% style="background-color:yellow" %)**apt install minicom**
366 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
474 474  
475 475  
476 -Use minicom to connect to the RPI's terminal
369 +**3.  Select the bin file to burn**
477 477  
478 -[[image:image-20220602153146-3.png||height="439" width="500"]]
371 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
479 479  
373 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
480 480  
375 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
481 481  
482 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
483 483  
484 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
378 +**4.  Click to start the download**
485 485  
380 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
486 486  
487 -[[image:image-20220602154928-5.png||height="436" width="500"]]
488 488  
383 +**5.  Check update process**
489 489  
385 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
490 490  
491 -(% style="color:blue" %)**4. Send Uplink message**
492 492  
493 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
388 +**The following picture shows that the burning is successful**
494 494  
495 -example: AT+SENDB=01,02,8,05820802581ea0a5
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
496 496  
497 497  
498 -[[image:image-20220602160339-6.png||height="517" width="600"]]
393 += 2.  FAQ =
499 499  
395 +== 2.1  How to Compile Source Code for LA66? ==
500 500  
501 501  
502 -Check to see if TTN received the message
398 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
503 503  
504 -[[image:image-20220602160627-7.png||height="369" width="800"]]
505 505  
401 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
506 506  
507 507  
508 -== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
404 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
509 509  
510 -=== 3.8.1 DRAGINO-LA66-APP ===
511 511  
512 -[[image:image-20220723102027-3.png]]
407 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
513 513  
514 -==== Overview： ====
515 515  
516 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.
410 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
517 517  
518 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
519 519  
520 -==== Conditions of Use： ====
413 +== 2.4 How to use external antenna via ipex connector? ==
521 521  
522 -Requires a type-c to USB adapter
523 523  
524 -[[image:image-20220723104754-4.png]]
416 +You need to remove the spring antenna first, and also remove the resistor and capacitor.
417 +Connect external antenna.
525 525  
526 -==== Use of APP: ====
419 +[[image:image-20231129155939-1.png||height="529" width="397"]]
527 527  
528 -Function and page introduction
529 529  
530 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
422 += 3.  Order Info =
531 531  
532 -1.Display LA66 USB LoRaWAN Module connection status
533 533  
534 -2.Check and reconnect
425 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
535 535  
536 -3.Turn send timestamps on or off
537 537  
538 -4.Display LoRaWan connection status
428 +(% style="color:blue" %)**XXX**(%%): The default frequency band
539 539  
540 -5.Check LoRaWan connection status
430 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
431 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
432 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
433 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
434 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
435 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
436 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
437 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
438 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
541 541  
542 -6.The RSSI value of the node when the ACK is received
440 += 4.  Reference =
543 543  
544 -7.Node's Signal Strength Icon
545 545  
546 -8.Set the packet sending interval of the node in seconds
443 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
444 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
547 547  
548 -9.AT command input box
446 += 5.  FCC Statement =
549 549  
550 -10.Send AT command button
551 551  
552 -11.Node log box
449 +(% style="color:red" %)**FCC Caution:**
553 553  
554 -12.clear log button
451 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
555 555  
556 -13.exit button
453 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
557 557  
558 -LA66 USB LoRaWAN Module not connected
559 559  
560 -[[image:image-20220723110520-5.png||height="903" width="677"]]
456 +(% style="color:red" %)**IMPORTANT NOTE: **
561 561  
562 -Connect LA66 USB LoRaWAN Module
458 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
563 563  
564 -[[image:image-20220723110626-6.png||height="906" width="680"]]
460 +—Reorient or relocate the receiving antenna.
565 565  
566 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Module and integrate it into Node-RED ===
462 +—Increase the separation between the equipment and receiver.
567 567  
568 -1.Register LA66 USB LoRaWAN Module to TTNV3
464 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
569 569  
570 -[[image:image-20220723134549-8.png]]
466 +—Consult the dealer or an experienced radio/TV technician for help.
571 571  
572 -2.Open Node-RED,And import the JSON file to generate the flow
573 573  
574 -Sample JSON file please go to this link to download：放置JSON文件的链接
469 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
575 575  
576 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
471 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
577 577  
578 -The following is the positioning effect map
579 -
580 -[[image:image-20220723144339-1.png]]
581 -
582 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
583 -
584 -The LA66 USB LoRaWAN Module is the same as the LA66 LoRaWAN Shield update method
585 -
586 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
587 -
588 -[[image:image-20220723150132-2.png]]
589 -
590 -
591 -= 4.  Order Info =
592 -
593 -
594 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
595 -
596 -
597 -(% style="color:blue" %)**XXX**(%%): The default frequency band
598 -
599 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
600 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
601 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
602 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
603 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
604 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
605 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
606 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
607 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
608 -
609 -= 5.  Reference =
610 -
611 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
473 +
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20231129155939-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +4.6 MB
Content
image-20240101111021-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +11.2 KB
Content
image-20240101111030-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +11.2 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0