Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 123.1 >
edited by Herong Lu
on 2022/07/23 17:07
To version < 158.1 >
edited by Bei Jinggeng
on 2022/12/10 14:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Bei
Content
... ... @@ -1,4 +1,4 @@
1 -0
1 +
2 2  
3 3  **Table of Contents:**
4 4  
... ... @@ -6,34 +6,26 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
14 +== 1.1  Overview ==
19 19  
20 -(((
21 -
22 -)))
23 23  
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 31  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,35 +40,36 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 52  
53 53  == 1.2  Features ==
54 54  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
57 +
65 65  == 1.3  Specification ==
66 66  
60 +
67 67  * CPU: 32-bit 48 MHz
68 68  * Flash: 256KB
69 69  * RAM: 64KB
70 -* Input Power Range: 1.8v ~~ 3.7v
71 -* Power Consumption: < 4uA.
64 +* Input Power Range: 5v
72 72  * Frequency Range: 150 MHz ~~ 960 MHz
73 73  * Maximum Power +22 dBm constant RF output
74 74  * High sensitivity: -148 dBm
... ... @@ -80,532 +80,418 @@
80 80  ** Operating: 10 ~~ 95% (Non-Condensing)
81 81  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 82  * LoRa Rx current: <9 mA
83 -* I/O Voltage: 3.3v
84 84  
85 -== 1.4  AT Command ==
86 86  
78 +== 1.4  Pin Mapping & LED ==
87 87  
88 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 89  
81 +[[image:image-20220813183239-3.png||height="526" width="662"]]
90 90  
91 91  
92 -== 1.5  Dimension ==
93 93  
94 -[[image:image-20220718094750-3.png]]
85 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
95 95  
96 96  
88 +(((
89 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
90 +)))
97 97  
98 -== 1.6  Pin Mapping ==
99 99  
100 -[[image:image-20220720111850-1.png]]
93 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
101 101  
102 102  
96 +[[image:image-20220723100027-1.png]]
103 103  
104 -== 1.7  Land Pattern ==
105 105  
106 -[[image:image-20220517072821-2.png]]
99 +Open the serial port tool
107 107  
101 +[[image:image-20220602161617-8.png]]
108 108  
109 109  
110 -= 2.  LA66 LoRaWAN Shield =
104 +[[image:image-20220602161718-9.png||height="457" width="800"]]
111 111  
112 112  
113 -== 2.1  Overview ==
114 114  
108 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
115 115  
116 -(((
117 -[[image:image-20220715000826-2.png||height="145" width="220"]]
118 -)))
119 119  
120 -(((
121 -
122 -)))
111 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
123 123  
124 -(((
125 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 -)))
127 127  
128 -(((
129 -(((
130 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 -)))
132 -)))
114 +[[image:image-20220602161935-10.png||height="498" width="800"]]
133 133  
134 -(((
135 -(((
136 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 -)))
138 -)))
139 139  
140 -(((
141 -(((
142 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 -)))
144 -)))
145 145  
146 -(((
147 -(((
148 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 -)))
150 -)))
118 +(% style="color:blue" %)**3.  See Uplink Command**
151 151  
152 152  
121 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
153 153  
154 -== 2.2  Features ==
123 +example: AT+SENDB=01,02,8,05820802581ea0a5
155 155  
156 -* Arduino Shield base on LA66 LoRaWAN module
157 -* Support LoRaWAN v1.0.4 protocol
158 -* Support peer-to-peer protocol
159 -* TCXO crystal to ensure RF performance on low temperature
160 -* SMA connector
161 -* Available in different frequency LoRaWAN frequency bands.
162 -* World-wide unique OTAA keys.
163 -* AT Command via UART-TTL interface
164 -* Firmware upgradable via UART interface
165 -* Ultra-long RF range
125 +[[image:image-20220602162157-11.png||height="497" width="800"]]
166 166  
167 -== 2.3  Specification ==
168 168  
169 -* CPU: 32-bit 48 MHz
170 -* Flash: 256KB
171 -* RAM: 64KB
172 -* Input Power Range: 1.8v ~~ 3.7v
173 -* Power Consumption: < 4uA.
174 -* Frequency Range: 150 MHz ~~ 960 MHz
175 -* Maximum Power +22 dBm constant RF output
176 -* High sensitivity: -148 dBm
177 -* Temperature:
178 -** Storage: -55 ~~ +125℃
179 -** Operating: -40 ~~ +85℃
180 -* Humidity:
181 -** Storage: 5 ~~ 95% (Non-Condensing)
182 -** Operating: 10 ~~ 95% (Non-Condensing)
183 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
184 -* LoRa Rx current: <9 mA
185 -* I/O Voltage: 3.3v
186 186  
187 -== 2.4  Pin Mapping & LED ==
129 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
188 188  
189 189  
132 +[[image:image-20220817093644-1.png]]
190 190  
191 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
192 192  
193 193  
136 +== 1.6  Example: How to join helium ==
194 194  
195 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
196 196  
197 197  
140 +(% style="color:blue" %)**1.  Create a new device.**
198 198  
199 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
200 200  
143 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
201 201  
202 202  
203 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
204 204  
147 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
205 205  
206 -=== 2.8.1  Items needed for update ===
207 207  
208 -1. LA66 LoRaWAN Shield
209 -1. Arduino
210 -1. USB TO TTL Adapter
150 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
211 211  
212 -[[image:image-20220602100052-2.png||height="385" width="600"]]
213 213  
214 214  
215 -=== 2.8.2  Connection ===
154 +(% style="color:blue" %)**3.  Use AT commands.**
216 216  
217 217  
218 -[[image:image-20220602101311-3.png||height="276" width="600"]]
157 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
219 219  
220 220  
221 -(((
222 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
223 -)))
224 224  
225 -(((
226 -(% style="background-color:yellow" %)**GND  <-> GND
227 -TXD  <->  TXD
228 -RXD  <->  RXD**
229 -)))
161 +(% style="color:blue" %)**4.  Use the serial port tool**
230 230  
231 231  
232 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
164 +[[image:image-20220909151517-2.png||height="543" width="708"]]
233 233  
234 -Connect USB TTL Adapter to PC after connecting the wires
235 235  
236 236  
237 -[[image:image-20220602102240-4.png||height="304" width="600"]]
168 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
238 238  
239 239  
240 -=== 2.8.3  Upgrade steps ===
171 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
241 241  
242 242  
243 -==== 1.  Switch SW1 to put in ISP position ====
244 244  
175 +(% style="color:blue" %)**6.  Network successfully.**
245 245  
246 -[[image:image-20220602102824-5.png||height="306" width="600"]]
247 247  
178 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
248 248  
249 249  
250 -==== 2.  Press the RST switch once ====
251 251  
182 +(% style="color:blue" %)**7.  Send uplink using command**
252 252  
253 -[[image:image-20220602104701-12.png||height="285" width="600"]]
254 254  
185 +[[image:image-20220912085244-1.png]]
255 255  
256 256  
257 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
188 +[[image:image-20220912085307-2.png]]
258 258  
259 259  
260 -(((
261 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
262 -)))
263 263  
192 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
264 264  
265 -[[image:image-20220602103227-6.png]]
266 266  
267 267  
268 -[[image:image-20220602103357-7.png]]
196 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
269 269  
270 270  
199 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
271 271  
272 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
273 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
201 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
274 274  
275 275  
276 -[[image:image-20220602103844-8.png]]
204 +(% style="color:red" %)**Preconditions:**
277 277  
206 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
278 278  
208 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
279 279  
280 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
281 -(% style="color:blue" %)**3. Select the bin file to burn**
282 282  
283 283  
284 -[[image:image-20220602104144-9.png]]
212 +(% style="color:blue" %)**Steps for usage:**
285 285  
214 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
286 286  
287 -[[image:image-20220602104251-10.png]]
216 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
288 288  
218 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
289 289  
290 -[[image:image-20220602104402-11.png]]
291 291  
221 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
292 292  
293 293  
294 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
295 -(% style="color:blue" %)**4. Click to start the download**
296 296  
297 -[[image:image-20220602104923-13.png]]
225 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
298 298  
299 299  
228 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
300 300  
301 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
302 -(% style="color:blue" %)**5. Check update process**
303 303  
231 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
304 304  
305 -[[image:image-20220602104948-14.png]]
306 306  
234 +[[image:image-20220723100439-2.png]]
307 307  
308 308  
309 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
310 -(% style="color:blue" %)**The following picture shows that the burning is successful**
311 311  
312 -[[image:image-20220602105251-15.png]]
238 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
313 313  
314 314  
241 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
315 315  
316 -= 3.  LA66 USB LoRaWAN Adapter =
243 + (% style="background-color:yellow" %)**apt update**
317 317  
245 + (% style="background-color:yellow" %)**apt install minicom**
318 318  
319 -== 3.1  Overview ==
320 320  
248 +Use minicom to connect to the RPI's terminal
321 321  
322 -[[image:image-20220715001142-3.png||height="145" width="220"]]
250 +[[image:image-20220602153146-3.png||height="439" width="500"]]
323 323  
324 324  
325 -(((
326 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
327 -)))
328 328  
329 -(((
330 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
331 -)))
254 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
332 332  
333 -(((
334 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
335 -)))
336 336  
337 -(((
338 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
339 -)))
257 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
340 340  
341 -(((
342 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
343 -)))
344 344  
260 +[[image:image-20220602154928-5.png||height="436" width="500"]]
345 345  
346 346  
347 -== 3.2  Features ==
348 348  
349 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
350 -* Ultra-long RF range
351 -* Support LoRaWAN v1.0.4 protocol
352 -* Support peer-to-peer protocol
353 -* TCXO crystal to ensure RF performance on low temperature
354 -* Spring RF antenna
355 -* Available in different frequency LoRaWAN frequency bands.
356 -* World-wide unique OTAA keys.
357 -* AT Command via UART-TTL interface
358 -* Firmware upgradable via UART interface
359 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
264 +(% style="color:blue" %)**4.  Send Uplink message**
360 360  
361 -== 3.3  Specification ==
362 362  
363 -* CPU: 32-bit 48 MHz
364 -* Flash: 256KB
365 -* RAM: 64KB
366 -* Input Power Range: 5v
367 -* Frequency Range: 150 MHz ~~ 960 MHz
368 -* Maximum Power +22 dBm constant RF output
369 -* High sensitivity: -148 dBm
370 -* Temperature:
371 -** Storage: -55 ~~ +125℃
372 -** Operating: -40 ~~ +85℃
373 -* Humidity:
374 -** Storage: 5 ~~ 95% (Non-Condensing)
375 -** Operating: 10 ~~ 95% (Non-Condensing)
376 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
377 -* LoRa Rx current: <9 mA
267 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
378 378  
379 -== 3.4  Pin Mapping & LED ==
269 +example: AT+SENDB=01,02,8,05820802581ea0a5
380 380  
381 381  
272 +[[image:image-20220602160339-6.png||height="517" width="600"]]
382 382  
383 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
384 384  
385 385  
386 -(((
387 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
388 -)))
276 +Check to see if TTN received the message
389 389  
390 390  
391 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
279 +[[image:image-20220602160627-7.png||height="369" width="800"]]
392 392  
393 393  
394 -[[image:image-20220723100027-1.png]]
395 395  
283 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
396 396  
397 -Open the serial port tool
398 398  
399 -[[image:image-20220602161617-8.png]]
286 +=== 1.9.1  Hardware and Software Connection ===
400 400  
401 -[[image:image-20220602161718-9.png||height="457" width="800"]]
402 402  
403 403  
290 +==== (% style="color:blue" %)**Overview：**(%%) ====
404 404  
405 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
406 406  
407 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
293 +(((
294 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
408 408  
296 +* Send real-time location information of mobile phone to LoRaWAN network.
297 +* Check LoRaWAN network signal strengh.
298 +* Manually send messages to LoRaWAN network.
299 +)))
409 409  
410 -[[image:image-20220602161935-10.png||height="498" width="800"]]
411 411  
412 412  
413 413  
414 -(% style="color:blue" %)**3. See Uplink Command**
415 415  
416 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
305 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
417 417  
418 -example: AT+SENDB=01,02,8,05820802581ea0a5
419 419  
420 -[[image:image-20220602162157-11.png||height="497" width="800"]]
308 +A USB to Type-C adapter is needed to connect to a Mobile phone.
421 421  
310 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
422 422  
312 +[[image:image-20220813174353-2.png||height="360" width="313"]]
423 423  
424 -(% style="color:blue" %)**4. Check to see if TTN received the message**
425 425  
426 -[[image:image-20220602162331-12.png||height="420" width="800"]]
427 427  
428 428  
317 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
429 429  
430 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
431 431  
320 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
432 432  
433 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
434 434  
435 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
323 +[[image:image-20220813173738-1.png]]
436 436  
437 -(% style="color:red" %)**Preconditions:**
438 438  
439 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
440 440  
441 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
442 442  
328 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
443 443  
444 444  
445 -(% style="color:blue" %)**Steps for usage:**
331 +Function and page introduction
446 446  
447 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
448 448  
449 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
334 +[[image:image-20220723113448-7.png||height="995" width="450"]]
450 450  
451 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
452 452  
337 +**Block Explain:**
453 453  
339 +1.  Display LA66 USB LoRaWAN Module connection status
454 454  
455 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
341 +2.  Check and reconnect
456 456  
343 +3.  Turn send timestamps on or off
457 457  
458 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
345 +4.  Display LoRaWan connection status
459 459  
347 +5.  Check LoRaWan connection status
460 460  
461 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
349 +6.  The RSSI value of the node when the ACK is received
462 462  
463 -[[image:image-20220723100439-2.png]]
351 +7.  Node's Signal Strength Icon
464 464  
353 +8.  Configure Location Uplink Interval
465 465  
355 +9.  AT command input box
466 466  
467 -(% style="color:blue" %)**2. Install Minicom in RPi.**
357 +10.  Send Button:  Send input box info to LA66 USB Adapter
468 468  
469 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
359 +11.  Output Log from LA66 USB adapter
470 470  
471 - (% style="background-color:yellow" %)**apt update**
361 +12.  clear log button
472 472  
473 - (% style="background-color:yellow" %)**apt install minicom**
363 +13.  exit button
474 474  
475 475  
476 -Use minicom to connect to the RPI's terminal
477 477  
478 -[[image:image-20220602153146-3.png||height="439" width="500"]]
367 +LA66 USB LoRaWAN Module not connected
479 479  
480 480  
370 +[[image:image-20220723110520-5.png||height="677" width="508"]]
481 481  
482 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
483 483  
484 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
485 485  
374 +Connect LA66 USB LoRaWAN Module
486 486  
487 -[[image:image-20220602154928-5.png||height="436" width="500"]]
488 488  
377 +[[image:image-20220723110626-6.png||height="681" width="511"]]
489 489  
490 490  
491 -(% style="color:blue" %)**4. Send Uplink message**
492 492  
493 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
494 494  
495 -example: AT+SENDB=01,02,8,05820802581ea0a5
382 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
496 496  
497 497  
498 -[[image:image-20220602160339-6.png||height="517" width="600"]]
385 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
499 499  
500 500  
388 +[[image:image-20220723134549-8.png]]
501 501  
502 -Check to see if TTN received the message
503 503  
504 -[[image:image-20220602160627-7.png||height="369" width="800"]]
505 505  
392 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
506 506  
507 507  
508 -== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
395 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
509 509  
510 -=== 3.8.1 DRAGINO-LA66-APP ===
397 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
511 511  
512 -[[image:image-20220723102027-3.png]]
399 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
513 513  
514 -==== Overview： ====
401 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
515 515  
516 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.
517 517  
518 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
404 +Example output in NodeRed is as below:
519 519  
520 -==== Conditions of Use： ====
406 +[[image:image-20220723144339-1.png]]
521 521  
522 -Requires a type-c to USB adapter
523 523  
524 -[[image:image-20220723104754-4.png]]
525 525  
526 -==== Use of APP: ====
410 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
527 527  
528 -Function and page introduction
529 529  
530 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
413 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
531 531  
532 -1.Display LA66 USB LoRaWAN Module connection status
415 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
533 533  
534 -2.Check and reconnect
535 535  
536 -3.Turn send timestamps on or off
418 +[[image:image-20220723150132-2.png]]
537 537  
538 -4.Display LoRaWan connection status
539 539  
540 -5.Check LoRaWan connection status
541 541  
542 -6.The RSSI value of the node when the ACK is received
422 += 2.  FAQ =
543 543  
544 -7.Node's Signal Strength Icon
545 545  
546 -8.Set the packet sending interval of the node in seconds
425 +== 2.1  How to Compile Source Code for LA66? ==
547 547  
548 -9.AT command input box
549 549  
550 -10.Send AT command button
428 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
551 551  
552 -11.Node log box
553 553  
554 -12.clear log button
555 555  
556 -13.exit button
432 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
557 557  
558 -LA66 USB LoRaWAN Module not connected
559 559  
560 -[[image:image-20220723110520-5.png||height="903" width="677"]]
435 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
561 561  
562 -Connect LA66 USB LoRaWAN Module
563 563  
564 -[[image:image-20220723110626-6.png||height="906" width="680"]]
565 565  
566 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Module and integrate it into Node-RED ===
439 += 3.  Order Info =
567 567  
568 -1.Register LA66 USB LoRaWAN Module to TTNV3
569 569  
570 -[[image:image-20220723134549-8.png]]
442 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
571 571  
572 -2.Open Node-RED,And import the JSON file to generate the flow
573 573  
574 -Sample JSON file please go to this link to download：放置JSON文件的链接
445 +(% style="color:blue" %)**XXX**(%%): The default frequency band
575 575  
576 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
447 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
448 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
449 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
450 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
451 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
452 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
453 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
454 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
455 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
577 577  
578 -The following is the positioning effect map
579 579  
580 -[[image:image-20220723144339-1.png]]
458 += 4.  Reference =
581 581  
582 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
583 583  
584 -The LA66 USB LoRaWAN Module is the same as the LA66 LoRaWAN Shield update method
461 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
462 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
585 585  
586 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
587 587  
588 -[[image:image-20220723150132-2.png]]
465 += 5.  FCC Statement =
589 589  
590 590  
591 -= 4.  Order Info =
468 +(% style="color:red" %)**FCC Caution:**
592 592  
470 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
593 593  
594 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
472 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
595 595  
596 596  
597 -(% style="color:blue" %)**XXX**(%%): The default frequency band
475 +(% style="color:red" %)**IMPORTANT NOTE: **
598 598  
599 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
600 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
601 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
602 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
603 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
604 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
605 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
606 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
607 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
477 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
608 608  
609 -= 5.  Reference =
479 +—Reorient or relocate the receiving antenna.
610 610  
611 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
481 +—Increase the separation between the equipment and receiver.
482 +
483 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 +
485 +—Consult the dealer or an experienced radio/TV technician for help.
486 +
487 +
488 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
489 +
490 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0