Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 109.1 >
edited by Herong Lu
on 2022/07/23 11:34
To version < 169.2 >
edited by Xiaoling
on 2024/01/22 09:39
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Xiaoling
Content
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="194" width="294"]][[image:image-20240101111030-2.png]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 31  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,36 +40,34 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
55 -* Support LoRaWAN v1.0.4 protocol
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.3 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
65 -
66 66  == 1.3  Specification ==
67 67  
57 +
68 68  * CPU: 32-bit 48 MHz
69 69  * Flash: 256KB
70 70  * RAM: 64KB
71 -* Input Power Range: 1.8v ~~ 3.7v
72 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
73 73  * Frequency Range: 150 MHz ~~ 960 MHz
74 74  * Maximum Power +22 dBm constant RF output
75 75  * High sensitivity: -148 dBm
... ... @@ -81,481 +81,404 @@
81 81  ** Operating: 10 ~~ 95% (Non-Condensing)
82 82  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
83 83  * LoRa Rx current: <9 mA
84 -* I/O Voltage: 3.3v
85 85  
74 +== 1.4  Pin Mapping & LED ==
86 86  
87 -== 1.4  AT Command ==
88 88  
77 +[[image:image-20220813183239-3.png||height="526" width="662"]]
89 89  
90 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
80 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
92 92  
93 93  
94 -== 1.5  Dimension ==
83 +(((
84 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
85 +)))
95 95  
96 -[[image:image-20220718094750-3.png]]
87 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
97 97  
89 +[[image:image-20220723100027-1.png]]
98 98  
99 99  
100 -== 1.6  Pin Mapping ==
92 +Open the serial port tool
101 101  
102 -[[image:image-20220720111850-1.png]]
94 +[[image:image-20220602161617-8.png]]
103 103  
104 104  
97 +[[image:image-20220602161718-9.png||height="457" width="800"]]
105 105  
106 -== 1.7  Land Pattern ==
107 107  
108 -[[image:image-20220517072821-2.png]]
100 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
109 109  
102 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
110 110  
104 +[[image:image-20220602161935-10.png||height="498" width="800"]]
111 111  
112 -= 2.  LA66 LoRaWAN Shield =
113 113  
107 +(% style="color:blue" %)**3.  See Uplink Command**
114 114  
115 -== 2.1  Overview ==
109 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
116 116  
111 +example: AT+SENDB=01,02,8,05820802581ea0a5
117 117  
118 -(((
119 -[[image:image-20220715000826-2.png||height="145" width="220"]]
120 -)))
113 +[[image:image-20220602162157-11.png||height="497" width="800"]]
121 121  
122 -(((
123 -
124 -)))
125 125  
126 -(((
127 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 -)))
116 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
129 129  
130 -(((
131 -(((
132 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 -)))
134 -)))
118 +[[image:image-20220817093644-1.png]]
135 135  
136 -(((
137 -(((
138 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 -)))
140 -)))
141 141  
142 -(((
143 -(((
144 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 -)))
146 -)))
121 +== 1.6  Example: How to join helium ==
147 147  
148 -(((
149 -(((
150 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 -)))
152 -)))
153 153  
124 +(% style="color:blue" %)**1.  Create a new device.**
154 154  
126 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
155 155  
156 -== 2.2  Features ==
157 157  
158 -* Arduino Shield base on LA66 LoRaWAN module
159 -* Support LoRaWAN v1.0.4 protocol
160 -* Support peer-to-peer protocol
161 -* TCXO crystal to ensure RF performance on low temperature
162 -* SMA connector
163 -* Available in different frequency LoRaWAN frequency bands.
164 -* World-wide unique OTAA keys.
165 -* AT Command via UART-TTL interface
166 -* Firmware upgradable via UART interface
167 -* Ultra-long RF range
129 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
168 168  
131 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
169 169  
170 -== 2.3  Specification ==
171 171  
172 -* CPU: 32-bit 48 MHz
173 -* Flash: 256KB
174 -* RAM: 64KB
175 -* Input Power Range: 1.8v ~~ 3.7v
176 -* Power Consumption: < 4uA.
177 -* Frequency Range: 150 MHz ~~ 960 MHz
178 -* Maximum Power +22 dBm constant RF output
179 -* High sensitivity: -148 dBm
180 -* Temperature:
181 -** Storage: -55 ~~ +125℃
182 -** Operating: -40 ~~ +85℃
183 -* Humidity:
184 -** Storage: 5 ~~ 95% (Non-Condensing)
185 -** Operating: 10 ~~ 95% (Non-Condensing)
186 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
187 -* LoRa Rx current: <9 mA
188 -* I/O Voltage: 3.3v
134 +(% style="color:blue" %)**3.  Use AT commands.**
189 189  
136 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
190 190  
191 -== 2.4  Pin Mapping & LED ==
192 192  
139 +(% style="color:blue" %)**4.  Use the serial port tool**
193 193  
141 +[[image:image-20220909151517-2.png||height="543" width="708"]]
194 194  
195 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
196 196  
144 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
197 197  
146 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
198 198  
199 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
200 200  
149 +(% style="color:blue" %)**6.  Network successfully.**
201 201  
151 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
202 202  
203 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
204 204  
154 +(% style="color:blue" %)**7.  Send uplink using command**
205 205  
156 +[[image:image-20220912085244-1.png]]
206 206  
207 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
158 +[[image:image-20220912085307-2.png]]
208 208  
209 209  
210 -=== 2.8.1  Items needed for update ===
161 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
211 211  
212 -1. LA66 LoRaWAN Shield
213 -1. Arduino
214 -1. USB TO TTL Adapter
215 215  
216 -[[image:image-20220602100052-2.png||height="385" width="600"]]
164 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
217 217  
218 218  
219 -=== 2.8.2  Connection ===
167 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
220 220  
169 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
221 221  
222 -[[image:image-20220602101311-3.png||height="276" width="600"]]
223 223  
172 +(% style="color:red" %)**Preconditions:**
224 224  
225 -(((
226 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
227 -)))
174 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
228 228  
229 -(((
230 -(% style="background-color:yellow" %)**GND  <-> GND
231 -TXD  <->  TXD
232 -RXD  <->  RXD**
233 -)))
176 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
234 234  
235 235  
236 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
179 +(% style="color:blue" %)**Steps for usage:**
237 237  
238 -Connect USB TTL Adapter to PC after connecting the wires
181 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
239 239  
183 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
240 240  
241 -[[image:image-20220602102240-4.png||height="304" width="600"]]
185 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
242 242  
243 243  
244 -=== 2.8.3  Upgrade steps ===
188 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
245 245  
246 246  
247 -==== 1.  Switch SW1 to put in ISP position ====
191 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
248 248  
249 249  
250 -[[image:image-20220602102824-5.png||height="306" width="600"]]
194 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
251 251  
196 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
252 252  
198 +[[image:image-20220723100439-2.png]]
253 253  
254 -==== 2.  Press the RST switch once ====
255 255  
201 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
256 256  
257 -[[image:image-20220602104701-12.png||height="285" width="600"]]
203 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
258 258  
205 + (% style="background-color:yellow" %)**apt update**
259 259  
207 + (% style="background-color:yellow" %)**apt install minicom**
260 260  
261 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
209 +Use minicom to connect to the RPI's terminal
262 262  
211 +[[image:image-20220602153146-3.png||height="439" width="500"]]
263 263  
264 -(((
265 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
266 -)))
267 267  
214 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
268 268  
269 -[[image:image-20220602103227-6.png]]
216 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
270 270  
218 +[[image:image-20220602154928-5.png||height="436" width="500"]]
271 271  
272 -[[image:image-20220602103357-7.png]]
273 273  
221 +(% style="color:blue" %)**4.  Send Uplink message**
274 274  
223 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
275 275  
276 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
277 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
225 +example: AT+SENDB=01,02,8,05820802581ea0a5
278 278  
227 +[[image:image-20220602160339-6.png||height="517" width="600"]]
279 279  
280 -[[image:image-20220602103844-8.png]]
281 281  
230 +Check to see if TTN received the message
282 282  
283 283  
284 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
285 -(% style="color:blue" %)**3. Select the bin file to burn**
233 +[[image:image-20220602160627-7.png||height="369" width="800"]]
286 286  
287 287  
288 -[[image:image-20220602104144-9.png]]
236 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
289 289  
238 +=== 1.9.1  Hardware and Software Connection ===
290 290  
291 -[[image:image-20220602104251-10.png]]
292 292  
241 +==== (% style="color:blue" %)**Overview：**(%%) ====
293 293  
294 -[[image:image-20220602104402-11.png]]
243 +(((
244 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
295 295  
246 +* Send real-time location information of mobile phone to LoRaWAN network.
247 +* Check LoRaWAN network signal strengh.
248 +* Manually send messages to LoRaWAN network.
249 +)))
296 296  
297 297  
298 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
299 -(% style="color:blue" %)**4. Click to start the download**
300 300  
301 -[[image:image-20220602104923-13.png]]
253 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
302 302  
255 +A USB to Type-C adapter is needed to connect to a Mobile phone.
303 303  
257 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
304 304  
305 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
306 -(% style="color:blue" %)**5. Check update process**
259 +[[image:image-20220813174353-2.png||height="360" width="313"]]
307 307  
308 308  
309 -[[image:image-20220602104948-14.png]]
262 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
310 310  
264 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
311 311  
266 +[[image:image-20220813173738-1.png]]
312 312  
313 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
314 -(% style="color:blue" %)**The following picture shows that the burning is successful**
315 315  
316 -[[image:image-20220602105251-15.png]]
269 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
317 317  
271 +Function and page introduction:
318 318  
273 +[[image:image-20220723113448-7.png||height="995" width="450"]]
319 319  
320 -= 3.  LA66 USB LoRaWAN Adapter =
321 321  
276 +(% style="color:blue" %)**Block Explain:**
322 322  
323 -== 3.1  Overview ==
278 +1.  Display LA66 USB LoRaWAN Module connection status
324 324  
280 +2.  Check and reconnect
325 325  
326 -[[image:image-20220715001142-3.png||height="145" width="220"]]
282 +3.  Turn send timestamps on or off
327 327  
284 +4.  Display LoRaWan connection status
328 328  
329 -(((
330 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
331 -)))
286 +5.  Check LoRaWan connection status
332 332  
333 -(((
334 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 -)))
288 +6.  The RSSI value of the node when the ACK is received
336 336  
337 -(((
338 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
339 -)))
290 +7.  Node's Signal Strength Icon
340 340  
341 -(((
342 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
343 -)))
292 +8.  Configure Location Uplink Interval
344 344  
345 -(((
346 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
347 -)))
294 +9.  AT command input box
348 348  
296 +10.  Send Button:  Send input box info to LA66 USB Adapter
349 349  
298 +11.  Output Log from LA66 USB adapter
350 350  
351 -== 3.2  Features ==
300 +12.  clear log button
352 352  
353 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
354 -* Ultra-long RF range
355 -* Support LoRaWAN v1.0.4 protocol
356 -* Support peer-to-peer protocol
357 -* TCXO crystal to ensure RF performance on low temperature
358 -* Spring RF antenna
359 -* Available in different frequency LoRaWAN frequency bands.
360 -* World-wide unique OTAA keys.
361 -* AT Command via UART-TTL interface
362 -* Firmware upgradable via UART interface
363 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
302 +13.  exit button
364 364  
365 365  
366 -== 3.3  Specification ==
305 +LA66 USB LoRaWAN Module not connected:
367 367  
368 -* CPU: 32-bit 48 MHz
369 -* Flash: 256KB
370 -* RAM: 64KB
371 -* Input Power Range: 5v
372 -* Frequency Range: 150 MHz ~~ 960 MHz
373 -* Maximum Power +22 dBm constant RF output
374 -* High sensitivity: -148 dBm
375 -* Temperature:
376 -** Storage: -55 ~~ +125℃
377 -** Operating: -40 ~~ +85℃
378 -* Humidity:
379 -** Storage: 5 ~~ 95% (Non-Condensing)
380 -** Operating: 10 ~~ 95% (Non-Condensing)
381 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
382 -* LoRa Rx current: <9 mA
307 +[[image:image-20220723110520-5.png||height="677" width="508"]]
383 383  
384 384  
385 -== 3.4  Pin Mapping & LED ==
310 +Connect LA66 USB LoRaWAN Module:
386 386  
312 +[[image:image-20220723110626-6.png||height="681" width="511"]]
387 387  
388 388  
389 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
315 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
390 390  
391 391  
392 -(((
393 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
394 -)))
318 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
395 395  
396 396  
397 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
321 +[[image:image-20220723134549-8.png]]
398 398  
399 399  
400 -[[image:image-20220723100027-1.png]]
401 401  
325 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
402 402  
403 -Open the serial port tool
404 404  
405 -[[image:image-20220602161617-8.png]]
328 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
406 406  
407 -[[image:image-20220602161718-9.png||height="457" width="800"]]
330 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
408 408  
332 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
409 409  
334 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
410 410  
411 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
412 412  
413 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
337 +Example output in NodeRed is as below:
414 414  
339 +[[image:image-20220723144339-1.png]]
415 415  
416 -[[image:image-20220602161935-10.png||height="498" width="800"]]
417 417  
342 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
418 418  
419 419  
420 -(% style="color:blue" %)**3. See Uplink Command**
345 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
421 421  
422 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
347 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
423 423  
424 -example: AT+SENDB=01,02,8,05820802581ea0a5
349 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
425 425  
426 -[[image:image-20220602162157-11.png||height="497" width="800"]]
351 +[[image:image-20220723150132-2.png]]
427 427  
428 428  
354 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
429 429  
430 -(% style="color:blue" %)**4. Check to see if TTN received the message**
431 431  
432 -[[image:image-20220602162331-12.png||height="420" width="800"]]
357 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
433 433  
359 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
434 434  
361 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
435 435  
436 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
437 437  
364 +**2.  Select the COM port corresponding to USB TTL**
438 438  
439 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
366 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
440 440  
441 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
442 442  
443 -(% style="color:red" %)**Preconditions:**
369 +**3.  Select the bin file to burn**
444 444  
445 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
371 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
446 446  
447 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
373 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
448 448  
375 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
449 449  
450 450  
451 -(% style="color:blue" %)**Steps for usage:**
378 +**4.  Click to start the download**
452 452  
453 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
380 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
454 454  
455 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
456 456  
457 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
383 +**5.  Check update process**
458 458  
385 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
459 459  
460 460  
461 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
388 +**The following picture shows that the burning is successful**
462 462  
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
463 463  
464 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
465 465  
393 += 2.  FAQ =
466 466  
467 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
395 +== 2.1  How to Compile Source Code for LA66? ==
468 468  
469 -[[image:image-20220723100439-2.png]]
470 470  
398 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
471 471  
472 472  
473 -(% style="color:blue" %)**2. Install Minicom in RPi.**
401 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
474 474  
475 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
476 476  
477 - (% style="background-color:yellow" %)**apt update**
404 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
478 478  
479 - (% style="background-color:yellow" %)**apt install minicom**
480 480  
407 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
481 481  
482 -Use minicom to connect to the RPI's terminal
483 483  
484 -[[image:image-20220602153146-3.png||height="439" width="500"]]
410 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
485 485  
486 486  
413 +== 2.4 How to use external antenna via ipex connector? ==
487 487  
488 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
489 489  
490 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
416 +You need to remove the spring antenna first, and also remove the resistor and capacitor.
417 +Connect external antenna.
491 491  
419 +[[image:image-20231129155939-1.png||height="529" width="397"]]
492 492  
493 -[[image:image-20220602154928-5.png||height="436" width="500"]]
494 494  
422 += 3.  Order Info =
495 495  
496 496  
497 -(% style="color:blue" %)**4. Send Uplink message**
425 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
498 498  
499 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
500 500  
501 -example: AT+SENDB=01,02,8,05820802581ea0a5
428 +(% style="color:blue" %)**XXX**(%%): The default frequency band
502 502  
430 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
431 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
432 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
433 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
434 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
435 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
436 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
437 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
438 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
503 503  
504 -[[image:image-20220602160339-6.png||height="517" width="600"]]
440 += 4.  Reference =
505 505  
506 506  
443 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
444 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
507 507  
508 -Check to see if TTN received the message
446 += 5.  FCC Statement =
509 509  
510 -[[image:image-20220602160627-7.png||height="369" width="800"]]
511 511  
449 +(% style="color:red" %)**FCC Caution:**
512 512  
451 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
513 513  
514 -== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
453 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
515 515  
516 -=== 3.8.1 DRAGINO-LA66-APP ===
517 517  
518 -[[image:image-20220723102027-3.png]]
456 +(% style="color:red" %)**IMPORTANT NOTE: **
519 519  
520 -==== Overview： ====
458 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
521 521  
522 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.（DRAGINO-LA66-APP currently only supports Android system）
460 +—Reorient or relocate the receiving antenna.
523 523  
524 -==== Conditions of Use： ====
462 +—Increase the separation between the equipment and receiver.
525 525  
526 -Requires a type-c to USB adapter
464 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
527 527  
528 -[[image:image-20220723104754-4.png]]
466 +—Consult the dealer or an experienced radio/TV technician for help.
529 529  
530 -==== Use of APP: ====
531 531  
532 -LA66 USB LoRaWAN Module not connected
469 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
533 533  
471 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
534 534  
535 -
536 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
537 -
538 -
539 -
540 -
541 -= 4.  Order Info =
542 -
543 -
544 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
545 -
546 -
547 -(% style="color:blue" %)**XXX**(%%): The default frequency band
548 -
549 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
550 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
551 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
552 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
553 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
554 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
555 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
556 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
557 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
558 -
559 -= 5.  Reference =
560 -
561 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
473 +
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20231129155939-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +4.6 MB
Content
image-20240101111021-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +11.2 KB
Content
image-20240101111030-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +11.2 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0