Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 101.4 >
edited by Xiaoling
on 2022/07/21 14:17
To version < 158.3 >
edited by Xiaoling
on 2022/12/13 17:34
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 31  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,37 +40,36 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
65 65  
66 66  
67 67  == 1.3  Specification ==
68 68  
59 +
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
72 -* Input Power Range: 1.8v ~~ 3.7v
73 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
74 74  * Frequency Range: 150 MHz ~~ 960 MHz
75 75  * Maximum Power +22 dBm constant RF output
76 76  * High sensitivity: -148 dBm
... ... @@ -82,455 +82,360 @@
82 82  ** Operating: 10 ~~ 95% (Non-Condensing)
83 83  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
84 84  * LoRa Rx current: <9 mA
85 -* I/O Voltage: 3.3v
86 86  
87 87  
88 88  
89 -== 1.4  AT Command ==
78 +== 1.4  Pin Mapping & LED ==
90 90  
91 91  
92 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
81 +[[image:image-20220813183239-3.png||height="526" width="662"]]
93 93  
94 94  
84 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
95 95  
96 -== 1.5  Dimension ==
97 97  
98 -[[image:image-20220718094750-3.png]]
87 +(((
88 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
89 +)))
99 99  
100 100  
92 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
101 101  
102 -== 1.6  Pin Mapping ==
103 103  
104 -[[image:image-20220720111850-1.png]]
95 +[[image:image-20220723100027-1.png]]
105 105  
106 106  
98 +Open the serial port tool
107 107  
108 -== 1.7  Land Pattern ==
100 +[[image:image-20220602161617-8.png]]
109 109  
110 -[[image:image-20220517072821-2.png]]
111 111  
103 +[[image:image-20220602161718-9.png||height="457" width="800"]]
112 112  
113 113  
114 -= 2.  LA66 LoRaWAN Shield =
115 115  
107 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
116 116  
117 -== 2.1  Overview ==
118 118  
110 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
119 119  
120 -(((
121 -[[image:image-20220715000826-2.png||height="145" width="220"]]
122 -)))
123 123  
124 -(((
125 -
126 -)))
113 +[[image:image-20220602161935-10.png||height="498" width="800"]]
127 127  
128 -(((
129 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
130 -)))
131 131  
132 -(((
133 -(((
134 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
135 -)))
136 -)))
137 137  
138 -(((
139 -(((
140 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
141 -)))
142 -)))
117 +(% style="color:blue" %)**3.  See Uplink Command**
143 143  
144 -(((
145 -(((
146 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
147 -)))
148 -)))
149 149  
150 -(((
151 -(((
152 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
153 -)))
154 -)))
120 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
155 155  
122 +example: AT+SENDB=01,02,8,05820802581ea0a5
156 156  
124 +[[image:image-20220602162157-11.png||height="497" width="800"]]
157 157  
158 -== 2.2  Features ==
159 159  
160 -* Arduino Shield base on LA66 LoRaWAN module
161 -* Support LoRaWAN v1.0.4 protocol
162 -* Support peer-to-peer protocol
163 -* TCXO crystal to ensure RF performance on low temperature
164 -* SMA connector
165 -* Available in different frequency LoRaWAN frequency bands.
166 -* World-wide unique OTAA keys.
167 -* AT Command via UART-TTL interface
168 -* Firmware upgradable via UART interface
169 -* Ultra-long RF range
170 170  
128 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
171 171  
172 172  
173 -== 2.3  Specification ==
131 +[[image:image-20220817093644-1.png]]
174 174  
175 -* CPU: 32-bit 48 MHz
176 -* Flash: 256KB
177 -* RAM: 64KB
178 -* Input Power Range: 1.8v ~~ 3.7v
179 -* Power Consumption: < 4uA.
180 -* Frequency Range: 150 MHz ~~ 960 MHz
181 -* Maximum Power +22 dBm constant RF output
182 -* High sensitivity: -148 dBm
183 -* Temperature:
184 -** Storage: -55 ~~ +125℃
185 -** Operating: -40 ~~ +85℃
186 -* Humidity:
187 -** Storage: 5 ~~ 95% (Non-Condensing)
188 -** Operating: 10 ~~ 95% (Non-Condensing)
189 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
190 -* LoRa Rx current: <9 mA
191 -* I/O Voltage: 3.3v
192 192  
134 +== 1.6  Example: How to join helium ==
193 193  
194 194  
195 -== 2.4  Pin Mapping & LED ==
196 196  
138 +(% style="color:blue" %)**1.  Create a new device.**
197 197  
198 198  
199 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
141 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
200 200  
201 201  
202 202  
203 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
145 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
204 204  
205 205  
148 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
206 206  
207 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
208 208  
209 209  
152 +(% style="color:blue" %)**3.  Use AT commands.**
210 210  
211 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
212 212  
155 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
213 213  
214 -=== 2.8.1  Items needed for update ===
215 215  
216 -1. LA66 LoRaWAN Shield
217 -1. Arduino
218 -1. USB TO TTL Adapter
219 219  
220 -[[image:image-20220602100052-2.png||height="385" width="600"]]
159 +(% style="color:blue" %)**4.  Use the serial port tool**
221 221  
222 222  
223 -=== 2.8.2  Connection ===
162 +[[image:image-20220909151517-2.png||height="543" width="708"]]
224 224  
225 225  
226 -[[image:image-20220602101311-3.png||height="276" width="600"]]
227 227  
166 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
228 228  
229 -(((
230 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
231 -)))
232 232  
233 -(((
234 -(% style="background-color:yellow" %)**GND  <-> GND
235 -TXD  <->  TXD
236 -RXD  <->  RXD**
237 -)))
169 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
238 238  
239 239  
240 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
241 241  
242 -Connect USB TTL Adapter to PC after connecting the wires
173 +(% style="color:blue" %)**6.  Network successfully.**
243 243  
244 244  
245 -[[image:image-20220602102240-4.png||height="304" width="600"]]
176 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
246 246  
247 247  
248 -=== 2.8.3  Upgrade steps ===
249 249  
180 +(% style="color:blue" %)**7.  Send uplink using command**
250 250  
251 -==== 1.  Switch SW1 to put in ISP position ====
252 252  
183 +[[image:image-20220912085244-1.png]]
253 253  
254 -[[image:image-20220602102824-5.png||height="306" width="600"]]
255 255  
186 +[[image:image-20220912085307-2.png]]
256 256  
257 257  
258 -==== 2.  Press the RST switch once ====
259 259  
190 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
260 260  
261 -[[image:image-20220602104701-12.png||height="285" width="600"]]
262 262  
193 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
263 263  
264 264  
265 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
196 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
266 266  
198 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
267 267  
268 -(((
269 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
270 -)))
271 271  
201 +(% style="color:red" %)**Preconditions:**
272 272  
273 -[[image:image-20220602103227-6.png]]
203 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
274 274  
205 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
275 275  
276 -[[image:image-20220602103357-7.png]]
277 277  
278 278  
209 +(% style="color:blue" %)**Steps for usage:**
279 279  
280 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
281 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
211 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
282 282  
213 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
283 283  
284 -[[image:image-20220602103844-8.png]]
215 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
285 285  
286 286  
218 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
287 287  
288 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
289 -(% style="color:blue" %)**3. Select the bin file to burn**
290 290  
221 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
291 291  
292 -[[image:image-20220602104144-9.png]]
293 293  
224 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
294 294  
295 -[[image:image-20220602104251-10.png]]
296 296  
227 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
297 297  
298 -[[image:image-20220602104402-11.png]]
299 299  
230 +[[image:image-20220723100439-2.png]]
300 300  
301 301  
302 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
303 -(% style="color:blue" %)**4. Click to start the download**
304 304  
305 -[[image:image-20220602104923-13.png]]
234 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
306 306  
307 307  
237 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
308 308  
309 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
310 -(% style="color:blue" %)**5. Check update process**
239 + (% style="background-color:yellow" %)**apt update**
311 311  
241 + (% style="background-color:yellow" %)**apt install minicom**
312 312  
313 -[[image:image-20220602104948-14.png]]
314 314  
244 +Use minicom to connect to the RPI's terminal
315 315  
246 +[[image:image-20220602153146-3.png||height="439" width="500"]]
316 316  
317 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
318 -(% style="color:blue" %)**The following picture shows that the burning is successful**
319 319  
320 -[[image:image-20220602105251-15.png]]
321 321  
250 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
322 322  
323 323  
324 -= 3.  LA66 USB LoRaWAN Adapter =
253 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
325 325  
326 326  
327 -== 3.1  Overview ==
256 +[[image:image-20220602154928-5.png||height="436" width="500"]]
328 328  
329 329  
330 -[[image:image-20220715001142-3.png||height="145" width="220"]]
331 331  
260 +(% style="color:blue" %)**4.  Send Uplink message**
332 332  
333 -(((
334 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
335 -)))
336 336  
337 -(((
338 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
339 -)))
263 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
340 340  
341 -(((
342 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
343 -)))
265 +example: AT+SENDB=01,02,8,05820802581ea0a5
344 344  
345 -(((
346 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
347 -)))
348 348  
349 -(((
350 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
351 -)))
268 +[[image:image-20220602160339-6.png||height="517" width="600"]]
352 352  
353 353  
354 354  
355 -== 3.2  Features ==
272 +Check to see if TTN received the message
356 356  
357 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
358 -* Ultra-long RF range
359 -* Support LoRaWAN v1.0.4 protocol
360 -* Support peer-to-peer protocol
361 -* TCXO crystal to ensure RF performance on low temperature
362 -* Spring RF antenna
363 -* Available in different frequency LoRaWAN frequency bands.
364 -* World-wide unique OTAA keys.
365 -* AT Command via UART-TTL interface
366 -* Firmware upgradable via UART interface
367 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
368 368  
275 +[[image:image-20220602160627-7.png||height="369" width="800"]]
369 369  
370 370  
371 -== 3.3  Specification ==
278 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
372 372  
373 -* CPU: 32-bit 48 MHz
374 -* Flash: 256KB
375 -* RAM: 64KB
376 -* Input Power Range: 5v
377 -* Frequency Range: 150 MHz ~~ 960 MHz
378 -* Maximum Power +22 dBm constant RF output
379 -* High sensitivity: -148 dBm
380 -* Temperature:
381 -** Storage: -55 ~~ +125℃
382 -** Operating: -40 ~~ +85℃
383 -* Humidity:
384 -** Storage: 5 ~~ 95% (Non-Condensing)
385 -** Operating: 10 ~~ 95% (Non-Condensing)
386 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
387 -* LoRa Rx current: <9 mA
280 +=== 1.9.1  Hardware and Software Connection ===
388 388  
389 389  
390 390  
391 -== 3.4  Pin Mapping & LED ==
284 +==== (% style="color:blue" %)**Overview：**(%%) ====
392 392  
393 393  
394 -
395 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
396 -
397 -
398 398  (((
399 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
288 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
289 +
290 +* Send real-time location information of mobile phone to LoRaWAN network.
291 +* Check LoRaWAN network signal strengh.
292 +* Manually send messages to LoRaWAN network.
400 400  )))
401 401  
402 402  
403 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
404 404  
405 405  
406 -[[image:image-20220602171217-1.png||height="538" width="800"]]
298 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
407 407  
408 408  
409 -Open the serial port tool
301 +A USB to Type-C adapter is needed to connect to a Mobile phone.
410 410  
411 -[[image:image-20220602161617-8.png]]
303 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
412 412  
413 -[[image:image-20220602161718-9.png||height="457" width="800"]]
305 +[[image:image-20220813174353-2.png||height="360" width="313"]]
414 414  
415 415  
416 416  
417 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
309 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
418 418  
419 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
420 420  
312 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
421 421  
422 -[[image:image-20220602161935-10.png||height="498" width="800"]]
423 423  
315 +[[image:image-20220813173738-1.png]]
424 424  
425 425  
426 -(% style="color:blue" %)**3. See Uplink Command**
427 427  
428 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
319 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
429 429  
430 -example: AT+SENDB=01,02,8,05820802581ea0a5
431 431  
432 -[[image:image-20220602162157-11.png||height="497" width="800"]]
322 +Function and page introduction
433 433  
434 434  
325 +[[image:image-20220723113448-7.png||height="995" width="450"]]
435 435  
436 -(% style="color:blue" %)**4. Check to see if TTN received the message**
437 437  
438 -[[image:image-20220602162331-12.png||height="420" width="800"]]
328 +**Block Explain:**
439 439  
330 +1.  Display LA66 USB LoRaWAN Module connection status
440 440  
332 +2.  Check and reconnect
441 441  
442 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
334 +3.  Turn send timestamps on or off
443 443  
336 +4.  Display LoRaWan connection status
444 444  
445 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
338 +5.  Check LoRaWan connection status
446 446  
340 +6.  The RSSI value of the node when the ACK is received
447 447  
448 -(% style="color:red" %)**Preconditions:**
342 +7.  Node's Signal Strength Icon
449 449  
450 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
344 +8.  Configure Location Uplink Interval
451 451  
452 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
346 +9.  AT command input box
453 453  
348 +10.  Send Button:  Send input box info to LA66 USB Adapter
454 454  
350 +11.  Output Log from LA66 USB adapter
455 455  
456 -(% style="color:blue" %)**Steps for usage:**
352 +12.  clear log button
457 457  
458 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
354 +13.  exit button
459 459  
460 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
461 461  
462 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
463 463  
358 +LA66 USB LoRaWAN Module not connected
464 464  
465 465  
466 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
361 +[[image:image-20220723110520-5.png||height="677" width="508"]]
467 467  
468 468  
469 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
470 470  
365 +Connect LA66 USB LoRaWAN Module
471 471  
472 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
473 473  
474 -[[image:image-20220602171233-2.png||height="538" width="800"]]
368 +[[image:image-20220723110626-6.png||height="681" width="511"]]
475 475  
476 476  
371 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
477 477  
478 -(% style="color:blue" %)**2. Install Minicom in RPi.**
479 479  
480 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
374 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
481 481  
482 - (% style="background-color:yellow" %)**apt update**
483 483  
484 - (% style="background-color:yellow" %)**apt install minicom**
377 +[[image:image-20220723134549-8.png]]
485 485  
486 486  
487 -Use minicom to connect to the RPI's terminal
488 488  
489 -[[image:image-20220602153146-3.png||height="439" width="500"]]
381 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
490 490  
491 491  
384 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
492 492  
493 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
386 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
494 494  
495 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
388 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
496 496  
390 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
497 497  
498 -[[image:image-20220602154928-5.png||height="436" width="500"]]
499 499  
393 +Example output in NodeRed is as below:
500 500  
395 +[[image:image-20220723144339-1.png]]
501 501  
502 -(% style="color:blue" %)**4. Send Uplink message**
503 503  
504 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
398 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
505 505  
506 -example: AT+SENDB=01,02,8,05820802581ea0a5
507 507  
401 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
508 508  
509 -[[image:image-20220602160339-6.png||height="517" width="600"]]
403 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
510 510  
511 511  
406 +[[image:image-20220723150132-2.png]]
512 512  
513 -Check to see if TTN received the message
514 514  
515 -[[image:image-20220602160627-7.png||height="369" width="800"]]
409 += 2.  FAQ =
516 516  
411 +== 2.1  How to Compile Source Code for LA66? ==
517 517  
518 518  
519 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
414 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
520 520  
521 521  
417 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
522 522  
523 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
524 524  
420 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
525 525  
526 526  
423 += 3.  Order Info =
527 527  
528 -= 4.  Order Info =
529 529  
426 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
530 530  
531 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
532 532  
533 -
534 534  (% style="color:blue" %)**XXX**(%%): The default frequency band
535 535  
536 536  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -543,6 +543,41 @@
543 543  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
544 544  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
545 545  
546 -= 5.  Reference =
547 547  
548 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
442 +
443 += 4.  Reference =
444 +
445 +
446 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
447 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
448 +
449 +
450 +
451 += 5.  FCC Statement =
452 +
453 +
454 +(% style="color:red" %)**FCC Caution:**
455 +
456 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
457 +
458 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
459 +
460 +
461 +(% style="color:red" %)**IMPORTANT NOTE: **
462 +
463 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
464 +
465 +—Reorient or relocate the receiving antenna.
466 +
467 +—Increase the separation between the equipment and receiver.
468 +
469 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
470 +
471 +—Consult the dealer or an experienced radio/TV technician for help.
472 +
473 +
474 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
475 +
476 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
477 +
478 +
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0