Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 101.2
edited by Xiaoling
on 2022/07/20 11:19
Change comment: There is no comment for this version
To version 161.3
edited by Xiaoling
on 2023/09/19 18:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,36 +40,34 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
55 -* Support LoRaWAN v1.0.4 protocol
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.3 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
65 -
66 66  == 1.3  Specification ==
67 67  
57 +
68 68  * CPU: 32-bit 48 MHz
69 69  * Flash: 256KB
70 70  * RAM: 64KB
71 -* Input Power Range: 1.8v ~~ 3.7v
72 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
73 73  * Frequency Range: 150 MHz ~~ 960 MHz
74 74  * Maximum Power +22 dBm constant RF output
75 75  * High sensitivity: -148 dBm
... ... @@ -81,450 +81,373 @@
81 81  ** Operating: 10 ~~ 95% (Non-Condensing)
82 82  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
83 83  * LoRa Rx current: <9 mA
84 -* I/O Voltage: 3.3v
85 85  
86 86  
87 -== 1.4  AT Command ==
75 +== 1.4  Pin Mapping & LED ==
88 88  
89 89  
90 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 +[[image:image-20220813183239-3.png||height="526" width="662"]]
91 91  
92 92  
81 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
93 93  
94 -== 1.5  Dimension ==
95 95  
96 -[[image:image-20220718094750-3.png]]
84 +(((
85 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
97 97  
87 +
88 +)))
98 98  
90 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
99 99  
100 -== 1.6  Pin Mapping ==
92 +[[image:image-20220723100027-1.png]]
101 101  
102 -[[image:image-20220720111850-1.png]]
103 103  
95 +Open the serial port tool
104 104  
97 +[[image:image-20220602161617-8.png]]
105 105  
106 -== 1.7  Land Pattern ==
107 107  
108 -[[image:image-20220517072821-2.png]]
100 +[[image:image-20220602161718-9.png||height="457" width="800"]]
109 109  
110 110  
103 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
111 111  
112 -= 2.  LA66 LoRaWAN Shield =
105 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
113 113  
107 +[[image:image-20220602161935-10.png||height="498" width="800"]]
114 114  
115 -== 2.1  Overview ==
116 116  
110 +(% style="color:blue" %)**3.  See Uplink Command**
117 117  
118 -(((
119 -[[image:image-20220715000826-2.png||height="145" width="220"]]
120 -)))
112 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
121 121  
122 -(((
123 -
124 -)))
114 +example: AT+SENDB=01,02,8,05820802581ea0a5
125 125  
126 -(((
127 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 -)))
116 +[[image:image-20220602162157-11.png||height="497" width="800"]]
129 129  
130 -(((
131 -(((
132 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 -)))
134 -)))
135 135  
136 -(((
137 -(((
138 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 -)))
140 -)))
119 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
141 141  
142 -(((
143 -(((
144 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 -)))
146 -)))
121 +[[image:image-20220817093644-1.png]]
147 147  
148 -(((
149 -(((
150 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 -)))
152 -)))
153 153  
124 +== 1.6  Example: How to join helium ==
154 154  
155 155  
156 -== 2.2  Features ==
127 +(% style="color:blue" %)**1.  Create a new device.**
157 157  
158 -* Arduino Shield base on LA66 LoRaWAN module
159 -* Support LoRaWAN v1.0.4 protocol
160 -* Support peer-to-peer protocol
161 -* TCXO crystal to ensure RF performance on low temperature
162 -* SMA connector
163 -* Available in different frequency LoRaWAN frequency bands.
164 -* World-wide unique OTAA keys.
165 -* AT Command via UART-TTL interface
166 -* Firmware upgradable via UART interface
167 -* Ultra-long RF range
129 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
168 168  
169 169  
170 -== 2.3  Specification ==
132 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
171 171  
172 -* CPU: 32-bit 48 MHz
173 -* Flash: 256KB
174 -* RAM: 64KB
175 -* Input Power Range: 1.8v ~~ 3.7v
176 -* Power Consumption: < 4uA.
177 -* Frequency Range: 150 MHz ~~ 960 MHz
178 -* Maximum Power +22 dBm constant RF output
179 -* High sensitivity: -148 dBm
180 -* Temperature:
181 -** Storage: -55 ~~ +125℃
182 -** Operating: -40 ~~ +85℃
183 -* Humidity:
184 -** Storage: 5 ~~ 95% (Non-Condensing)
185 -** Operating: 10 ~~ 95% (Non-Condensing)
186 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
187 -* LoRa Rx current: <9 mA
188 -* I/O Voltage: 3.3v
134 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
189 189  
190 190  
191 -== 2.4  Pin Mapping & LED ==
137 +(% style="color:blue" %)**3.  Use AT commands.**
192 192  
139 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
193 193  
194 194  
195 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
142 +(% style="color:blue" %)**4.  Use the serial port tool**
196 196  
144 +[[image:image-20220909151517-2.png||height="543" width="708"]]
197 197  
198 198  
199 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
147 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
200 200  
149 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
201 201  
202 202  
203 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
152 +(% style="color:blue" %)**6.  Network successfully.**
204 204  
154 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
205 205  
206 206  
207 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
157 +(% style="color:blue" %)**7.  Send uplink using command**
208 208  
159 +[[image:image-20220912085244-1.png]]
209 209  
210 -=== 2.8.1  Items needed for update ===
161 +[[image:image-20220912085307-2.png]]
211 211  
212 -1. LA66 LoRaWAN Shield
213 -1. Arduino
214 -1. USB TO TTL Adapter
215 215  
216 -[[image:image-20220602100052-2.png||height="385" width="600"]]
164 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
217 217  
218 218  
219 -=== 2.8.2  Connection ===
167 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
220 220  
221 221  
222 -[[image:image-20220602101311-3.png||height="276" width="600"]]
170 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
223 223  
172 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
224 224  
225 -(((
226 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
227 -)))
228 228  
229 -(((
230 -(% style="background-color:yellow" %)**GND  <-> GND
231 -TXD  <->  TXD
232 -RXD  <->  RXD**
233 -)))
175 +(% style="color:red" %)**Preconditions:**
234 234  
177 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
235 235  
236 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
179 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
237 237  
238 -Connect USB TTL Adapter to PC after connecting the wires
239 239  
240 240  
241 -[[image:image-20220602102240-4.png||height="304" width="600"]]
183 +(% style="color:blue" %)**Steps for usage:**
242 242  
185 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
243 243  
244 -=== 2.8.3  Upgrade steps ===
187 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
245 245  
189 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
246 246  
247 -==== 1.  Switch SW1 to put in ISP position ====
248 248  
192 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
249 249  
250 -[[image:image-20220602102824-5.png||height="306" width="600"]]
251 251  
195 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
252 252  
253 253  
254 -==== 2.  Press the RST switch once ====
198 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
255 255  
256 256  
257 -[[image:image-20220602104701-12.png||height="285" width="600"]]
201 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
258 258  
203 +[[image:image-20220723100439-2.png]]
259 259  
260 260  
261 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
206 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
262 262  
208 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
263 263  
264 -(((
265 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
266 -)))
210 + (% style="background-color:yellow" %)**apt update**
267 267  
212 + (% style="background-color:yellow" %)**apt install minicom**
268 268  
269 -[[image:image-20220602103227-6.png]]
214 +Use minicom to connect to the RPI's terminal
270 270  
216 +[[image:image-20220602153146-3.png||height="439" width="500"]]
271 271  
272 -[[image:image-20220602103357-7.png]]
273 273  
219 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
274 274  
221 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
275 275  
276 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
277 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
223 +[[image:image-20220602154928-5.png||height="436" width="500"]]
278 278  
279 279  
280 -[[image:image-20220602103844-8.png]]
226 +(% style="color:blue" %)**4.  Send Uplink message**
281 281  
228 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
282 282  
230 +example: AT+SENDB=01,02,8,05820802581ea0a5
283 283  
284 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
285 -(% style="color:blue" %)**3. Select the bin file to burn**
232 +[[image:image-20220602160339-6.png||height="517" width="600"]]
286 286  
287 287  
288 -[[image:image-20220602104144-9.png]]
289 289  
236 +Check to see if TTN received the message
290 290  
291 -[[image:image-20220602104251-10.png]]
292 292  
239 +[[image:image-20220602160627-7.png||height="369" width="800"]]
293 293  
294 -[[image:image-20220602104402-11.png]]
295 295  
242 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
296 296  
244 +=== 1.9.1  Hardware and Software Connection ===
297 297  
298 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
299 -(% style="color:blue" %)**4. Click to start the download**
300 300  
301 -[[image:image-20220602104923-13.png]]
302 302  
248 +==== (% style="color:blue" %)**Overview：**(%%) ====
303 303  
304 304  
305 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
306 -(% style="color:blue" %)**5. Check update process**
251 +(((
252 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
307 307  
254 +* Send real-time location information of mobile phone to LoRaWAN network.
255 +* Check LoRaWAN network signal strengh.
256 +* Manually send messages to LoRaWAN network.
257 +)))
308 308  
309 -[[image:image-20220602104948-14.png]]
310 310  
311 311  
312 312  
313 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
314 -(% style="color:blue" %)**The following picture shows that the burning is successful**
262 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
315 315  
316 -[[image:image-20220602105251-15.png]]
317 317  
265 +A USB to Type-C adapter is needed to connect to a Mobile phone.
318 318  
267 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
319 319  
320 -= 3.  LA66 USB LoRaWAN Adapter =
269 +[[image:image-20220813174353-2.png||height="360" width="313"]]
321 321  
322 322  
323 -== 3.1  Overview ==
324 324  
273 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
325 325  
326 -[[image:image-20220715001142-3.png||height="145" width="220"]]
327 327  
276 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
328 328  
329 -(((
330 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
331 -)))
332 332  
333 -(((
334 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 -)))
279 +[[image:image-20220813173738-1.png]]
336 336  
337 -(((
338 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
339 -)))
340 340  
341 -(((
342 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
343 -)))
344 344  
345 -(((
346 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
347 -)))
283 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
348 348  
349 349  
286 +Function and page introduction
350 350  
351 -== 3.2  Features ==
352 352  
353 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
354 -* Ultra-long RF range
355 -* Support LoRaWAN v1.0.4 protocol
356 -* Support peer-to-peer protocol
357 -* TCXO crystal to ensure RF performance on low temperature
358 -* Spring RF antenna
359 -* Available in different frequency LoRaWAN frequency bands.
360 -* World-wide unique OTAA keys.
361 -* AT Command via UART-TTL interface
362 -* Firmware upgradable via UART interface
363 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
289 +[[image:image-20220723113448-7.png||height="995" width="450"]]
364 364  
365 365  
366 -== 3.3  Specification ==
292 +(% style="color:blue" %)**Block Explain:**
367 367  
368 -* CPU: 32-bit 48 MHz
369 -* Flash: 256KB
370 -* RAM: 64KB
371 -* Input Power Range: 5v
372 -* Frequency Range: 150 MHz ~~ 960 MHz
373 -* Maximum Power +22 dBm constant RF output
374 -* High sensitivity: -148 dBm
375 -* Temperature:
376 -** Storage: -55 ~~ +125℃
377 -** Operating: -40 ~~ +85℃
378 -* Humidity:
379 -** Storage: 5 ~~ 95% (Non-Condensing)
380 -** Operating: 10 ~~ 95% (Non-Condensing)
381 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
382 -* LoRa Rx current: <9 mA
294 +1.  Display LA66 USB LoRaWAN Module connection status
383 383  
296 +2.  Check and reconnect
384 384  
385 -== 3.4  Pin Mapping & LED ==
298 +3.  Turn send timestamps on or off
386 386  
300 +4.  Display LoRaWan connection status
387 387  
302 +5.  Check LoRaWan connection status
388 388  
389 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
304 +6.  The RSSI value of the node when the ACK is received
390 390  
306 +7.  Node's Signal Strength Icon
391 391  
392 -(((
393 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
394 -)))
308 +8.  Configure Location Uplink Interval
395 395  
310 +9.  AT command input box
396 396  
397 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
312 +10.  Send Button:  Send input box info to LA66 USB Adapter
398 398  
314 +11.  Output Log from LA66 USB adapter
399 399  
400 -[[image:image-20220602171217-1.png||height="538" width="800"]]
316 +12.  clear log button
401 401  
318 +13.  exit button
402 402  
403 -Open the serial port tool
404 404  
405 -[[image:image-20220602161617-8.png]]
406 406  
407 -[[image:image-20220602161718-9.png||height="457" width="800"]]
322 +LA66 USB LoRaWAN Module not connected
408 408  
409 409  
325 +[[image:image-20220723110520-5.png||height="677" width="508"]]
410 410  
411 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
412 412  
413 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
414 414  
329 +Connect LA66 USB LoRaWAN Module
415 415  
416 -[[image:image-20220602161935-10.png||height="498" width="800"]]
417 417  
332 +[[image:image-20220723110626-6.png||height="681" width="511"]]
418 418  
419 419  
420 -(% style="color:blue" %)**3. See Uplink Command**
335 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
421 421  
422 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
423 423  
424 -example: AT+SENDB=01,02,8,05820802581ea0a5
338 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
425 425  
426 -[[image:image-20220602162157-11.png||height="497" width="800"]]
427 427  
341 +[[image:image-20220723134549-8.png]]
428 428  
429 429  
430 -(% style="color:blue" %)**4. Check to see if TTN received the message**
431 431  
432 -[[image:image-20220602162331-12.png||height="420" width="800"]]
345 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
433 433  
434 434  
348 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
435 435  
436 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
350 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
437 437  
352 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
438 438  
439 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
354 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
440 440  
441 441  
442 -(% style="color:red" %)**Preconditions:**
357 +Example output in NodeRed is as below:
443 443  
444 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
359 +[[image:image-20220723144339-1.png]]
445 445  
446 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
447 447  
362 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
448 448  
449 449  
450 -(% style="color:blue" %)**Steps for usage:**
365 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
451 451  
452 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
367 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
453 453  
454 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
369 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
455 455  
456 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
371 +[[image:image-20220723150132-2.png]]
457 457  
458 458  
459 459  
460 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
375 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
461 461  
462 462  
463 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
378 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
464 464  
380 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
465 465  
466 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
382 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
467 467  
468 -[[image:image-20220602171233-2.png||height="538" width="800"]]
469 469  
385 +**2.  Select the COM port corresponding to USB TTL**
470 470  
387 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
471 471  
472 -(% style="color:blue" %)**2. Install Minicom in RPi.**
473 473  
474 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
390 +**3.  Select the bin file to burn**
475 475  
476 - (% style="background-color:yellow" %)**apt update**
392 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
477 477  
478 - (% style="background-color:yellow" %)**apt install minicom**
394 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
479 479  
396 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
480 480  
481 -Use minicom to connect to the RPI's terminal
482 482  
483 -[[image:image-20220602153146-3.png||height="439" width="500"]]
399 +**4.  Click to start the download**
484 484  
401 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
485 485  
486 486  
487 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
404 +**5.  Check update process**
488 488  
489 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
406 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
490 490  
491 491  
492 -[[image:image-20220602154928-5.png||height="436" width="500"]]
409 +**The following picture shows that the burning is successful**
493 493  
411 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
494 494  
495 495  
496 -(% style="color:blue" %)**4. Send Uplink message**
414 += 2.  FAQ =
497 497  
498 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
416 +== 2.1  How to Compile Source Code for LA66? ==
499 499  
500 -example: AT+SENDB=01,02,8,05820802581ea0a5
501 501  
419 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
502 502  
503 -[[image:image-20220602160339-6.png||height="517" width="600"]]
504 504  
422 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
505 505  
506 506  
507 -Check to see if TTN received the message
425 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
508 508  
509 -[[image:image-20220602160627-7.png||height="369" width="800"]]
510 510  
428 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
511 511  
512 512  
513 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
431 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
514 514  
515 515  
434 += 3.  Order Info =
516 516  
517 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
518 518  
437 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
519 519  
520 520  
521 -
522 -= 4.  Order Info =
523 -
524 -
525 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
526 -
527 -
528 528  (% style="color:blue" %)**XXX**(%%): The default frequency band
529 529  
530 530  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -537,6 +537,39 @@
537 537  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
538 538  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
539 539  
540 -= 5.  Reference =
541 541  
542 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
453 += 4.  Reference =
454 +
455 +
456 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
457 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
458 +
459 +
460 += 5.  FCC Statement =
461 +
462 +
463 +(% style="color:red" %)**FCC Caution:**
464 +
465 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
466 +
467 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
468 +
469 +
470 +(% style="color:red" %)**IMPORTANT NOTE: **
471 +
472 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
473 +
474 +—Reorient or relocate the receiving antenna.
475 +
476 +—Increase the separation between the equipment and receiver.
477 +
478 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
479 +
480 +—Consult the dealer or an experienced radio/TV technician for help.
481 +
482 +
483 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
484 +
485 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
486 +
487 +
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content