Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 100.6 >
edited by Xiaoling
on 2022/07/19 11:49
To version < 174.1 >
edited by Bei Jinggeng
on 2024/03/19 09:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="194" width="294"]][[image:image-20240101111030-2.png]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,37 +40,34 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
55 -* Support LoRaWAN v1.0.4 protocol
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.3 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
65 -
66 -
67 67  == 1.3  Specification ==
68 68  
57 +
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
72 -* Input Power Range: 1.8v ~~ 3.7v
73 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
74 74  * Frequency Range: 150 MHz ~~ 960 MHz
75 75  * Maximum Power +22 dBm constant RF output
76 76  * High sensitivity: -148 dBm
... ... @@ -82,469 +82,427 @@
82 82  ** Operating: 10 ~~ 95% (Non-Condensing)
83 83  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
84 84  * LoRa Rx current: <9 mA
85 -* I/O Voltage: 3.3v
86 86  
74 +== 1.4  Pin Mapping & LED ==
87 87  
88 88  
89 -== 1.4  AT Command ==
77 +[[image:image-20220813183239-3.png||height="526" width="662"]]
90 90  
91 91  
92 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
80 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
93 93  
94 94  
83 +(((
84 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
85 +)))
95 95  
96 -== 1.5  Dimension ==
87 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
97 97  
98 -[[image:image-20220718094750-3.png]]
89 +[[image:image-20220723100027-1.png]]
99 99  
100 100  
92 +Open the serial port tool
101 101  
102 -== 1.6  Pin Mapping ==
94 +[[image:image-20220602161617-8.png]]
103 103  
104 104  
105 -[[image:image-20220719093156-1.png]]
97 +[[image:image-20220602161718-9.png||height="457" width="800"]]
106 106  
107 107  
100 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
108 108  
109 -== 1.7  Land Pattern ==
102 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
110 110  
111 -[[image:image-20220517072821-2.png]]
104 +[[image:image-20220602161935-10.png||height="498" width="800"]]
112 112  
113 113  
107 +(% style="color:blue" %)**3.  See Uplink Command**
114 114  
115 -= 2.  LA66 LoRaWAN Shield =
109 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
116 116  
111 +example: AT+SENDB=01,02,8,05820802581ea0a5
117 117  
118 -== 2.1  Overview ==
113 +[[image:image-20220602162157-11.png||height="497" width="800"]]
119 119  
120 120  
121 -(((
122 -[[image:image-20220715000826-2.png||height="145" width="220"]]
123 -)))
116 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
124 124  
125 -(((
126 -
127 -)))
118 +[[image:image-20220817093644-1.png]]
128 128  
129 -(((
130 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
131 -)))
132 132  
133 -(((
134 -(((
135 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
136 -)))
137 -)))
121 +== 1.6  Example: How to join helium ==
138 138  
139 -(((
140 -(((
141 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
142 -)))
143 -)))
144 144  
145 -(((
146 -(((
147 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
148 -)))
149 -)))
124 +(% style="color:blue" %)**1.  Create a new device.**
150 150  
151 -(((
152 -(((
153 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
154 -)))
155 -)))
126 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
156 156  
157 157  
129 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
158 158  
159 -== 2.2  Features ==
131 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
160 160  
161 -* Arduino Shield base on LA66 LoRaWAN module
162 -* Support LoRaWAN v1.0.4 protocol
163 -* Support peer-to-peer protocol
164 -* TCXO crystal to ensure RF performance on low temperature
165 -* SMA connector
166 -* Available in different frequency LoRaWAN frequency bands.
167 -* World-wide unique OTAA keys.
168 -* AT Command via UART-TTL interface
169 -* Firmware upgradable via UART interface
170 -* Ultra-long RF range
171 171  
134 +(% style="color:blue" %)**3.  Use AT commands.**
172 172  
136 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
173 173  
174 -== 2.3  Specification ==
175 175  
176 -* CPU: 32-bit 48 MHz
177 -* Flash: 256KB
178 -* RAM: 64KB
179 -* Input Power Range: 1.8v ~~ 3.7v
180 -* Power Consumption: < 4uA.
181 -* Frequency Range: 150 MHz ~~ 960 MHz
182 -* Maximum Power +22 dBm constant RF output
183 -* High sensitivity: -148 dBm
184 -* Temperature:
185 -** Storage: -55 ~~ +125℃
186 -** Operating: -40 ~~ +85℃
187 -* Humidity:
188 -** Storage: 5 ~~ 95% (Non-Condensing)
189 -** Operating: 10 ~~ 95% (Non-Condensing)
190 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
191 -* LoRa Rx current: <9 mA
192 -* I/O Voltage: 3.3v
139 +(% style="color:blue" %)**4.  Use the serial port tool**
193 193  
141 +[[image:image-20220909151517-2.png||height="543" width="708"]]
194 194  
195 195  
196 -== 2.4  Pin Mapping & LED ==
144 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
197 197  
146 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
198 198  
199 199  
200 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
149 +(% style="color:blue" %)**6.  Network successfully.**
201 201  
151 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
202 202  
203 203  
204 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
154 +(% style="color:blue" %)**7.  Send uplink using command**
205 205  
156 +[[image:image-20220912085244-1.png]]
206 206  
158 +[[image:image-20220912085307-2.png]]
207 207  
208 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
209 209  
161 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
210 210  
211 211  
212 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
164 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
213 213  
214 214  
215 -=== 2.8.1  Items needed for update ===
167 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
216 216  
217 -1. LA66 LoRaWAN Shield
218 -1. Arduino
219 -1. USB TO TTL Adapter
169 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
220 220  
221 -[[image:image-20220602100052-2.png||height="385" width="600"]]
222 222  
172 +(% style="color:red" %)**Preconditions:**
223 223  
224 -=== 2.8.2  Connection ===
174 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
225 225  
176 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
226 226  
227 -[[image:image-20220602101311-3.png||height="276" width="600"]]
228 228  
179 +(% style="color:blue" %)**Steps for usage:**
229 229  
230 -(((
231 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
232 -)))
181 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
233 233  
234 -(((
235 -(% style="background-color:yellow" %)**GND  <-> GND
236 -TXD  <->  TXD
237 -RXD  <->  RXD**
238 -)))
183 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
239 239  
185 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
240 240  
241 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
242 242  
243 -Connect USB TTL Adapter to PC after connecting the wires
188 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
244 244  
245 245  
246 -[[image:image-20220602102240-4.png||height="304" width="600"]]
191 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
247 247  
248 248  
249 -=== 2.8.3  Upgrade steps ===
194 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
250 250  
196 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
251 251  
252 -==== 1.  Switch SW1 to put in ISP position ====
198 +[[image:image-20220723100439-2.png]]
253 253  
254 254  
255 -[[image:image-20220602102824-5.png||height="306" width="600"]]
201 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
256 256  
203 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
257 257  
205 + (% style="background-color:yellow" %)**apt update**
258 258  
259 -==== 2.  Press the RST switch once ====
207 + (% style="background-color:yellow" %)**apt install minicom**
260 260  
209 +Use minicom to connect to the RPI's terminal
261 261  
262 -[[image:image-20220602104701-12.png||height="285" width="600"]]
211 +[[image:image-20220602153146-3.png||height="439" width="500"]]
263 263  
264 264  
214 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
265 265  
266 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
216 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
267 267  
218 +[[image:image-20220602154928-5.png||height="436" width="500"]]
268 268  
269 -(((
270 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
271 -)))
272 272  
221 +(% style="color:blue" %)**4.  Send Uplink message**
273 273  
274 -[[image:image-20220602103227-6.png]]
223 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
275 275  
225 +example: AT+SENDB=01,02,8,05820802581ea0a5
276 276  
277 -[[image:image-20220602103357-7.png]]
227 +[[image:image-20220602160339-6.png||height="517" width="600"]]
278 278  
279 279  
230 +Check to see if TTN received the message
280 280  
281 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
282 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
283 283  
233 +[[image:image-20220602160627-7.png||height="369" width="800"]]
284 284  
285 -[[image:image-20220602103844-8.png]]
286 286  
236 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
287 287  
238 +=== 1.9.1  Hardware and Software Connection ===
288 288  
289 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
290 -(% style="color:blue" %)**3. Select the bin file to burn**
291 291  
241 +(% class="wikigeneratedid" id="HOverviewFF1A" %)
242 +(% style="color:blue" %)**Overview：**
292 292  
293 -[[image:image-20220602104144-9.png]]
244 +(((
245 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
294 294  
247 +* Send real-time location information of mobile phone to LoRaWAN network.
248 +* Check LoRaWAN network signal strengh.
249 +* Manually send messages to LoRaWAN network.
250 +)))
295 295  
296 -[[image:image-20220602104251-10.png]]
297 297  
298 298  
299 -[[image:image-20220602104402-11.png]]
254 +(% class="wikigeneratedid" id="HHardwareConnection:" %)
255 +(% style="color:blue" %)**Hardware Connection:**
300 300  
257 +A USB to Type-C adapter is needed to connect to a Mobile phone.
301 301  
259 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
302 302  
303 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
304 -(% style="color:blue" %)**4. Click to start the download**
261 +[[image:image-20220813174353-2.png||height="360" width="313"]]
305 305  
306 -[[image:image-20220602104923-13.png]]
307 307  
264 +(% class="wikigeneratedid" id="HDownloadandInstallApp:" %)
265 +(% style="color:blue" %)**Download and Install App:**
308 308  
267 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
309 309  
310 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
311 -(% style="color:blue" %)**5. Check update process**
269 +[[image:image-20220813173738-1.png]]
312 312  
313 313  
314 -[[image:image-20220602104948-14.png]]
272 +(% class="wikigeneratedid" id="HUseofAPP:" %)
273 +(% style="color:blue" %)**Use of APP:**
315 315  
275 +Function and page introduction:
316 316  
277 +[[image:image-20220723113448-7.png||height="995" width="450"]]
317 317  
318 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
319 -(% style="color:blue" %)**The following picture shows that the burning is successful**
320 320  
321 -[[image:image-20220602105251-15.png]]
280 +(% style="color:blue" %)**Block Explain:**
322 322  
282 +1.  Display LA66 USB LoRaWAN Module connection status
323 323  
284 +2.  Check and reconnect
324 324  
325 -= 3.  LA66 USB LoRaWAN Adapter =
286 +3.  Turn send timestamps on or off
326 326  
288 +4.  Display LoRaWan connection status
327 327  
328 -== 3.1  Overview ==
290 +5.  Check LoRaWan connection status
329 329  
292 +6.  The RSSI value of the node when the ACK is received
330 330  
331 -[[image:image-20220715001142-3.png||height="145" width="220"]]
294 +7.  Node's Signal Strength Icon
332 332  
296 +8.  Configure Location Uplink Interval
333 333  
334 -(((
335 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
336 -)))
298 +9.  AT command input box
337 337  
338 -(((
339 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
340 -)))
300 +10.  Send Button:  Send input box info to LA66 USB Adapter
341 341  
342 -(((
343 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
344 -)))
302 +11.  Output Log from LA66 USB adapter
345 345  
346 -(((
347 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
348 -)))
304 +12.  clear log button
349 349  
350 -(((
351 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
352 -)))
306 +13.  exit button
353 353  
354 354  
309 +LA66 USB LoRaWAN Module not connected:
355 355  
356 -== 3.2  Features ==
311 +[[image:image-20220723110520-5.png||height="677" width="508"]]
357 357  
358 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
359 -* Ultra-long RF range
360 -* Support LoRaWAN v1.0.4 protocol
361 -* Support peer-to-peer protocol
362 -* TCXO crystal to ensure RF performance on low temperature
363 -* Spring RF antenna
364 -* Available in different frequency LoRaWAN frequency bands.
365 -* World-wide unique OTAA keys.
366 -* AT Command via UART-TTL interface
367 -* Firmware upgradable via UART interface
368 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
369 369  
314 +Connect LA66 USB LoRaWAN Module:
370 370  
316 +[[image:image-20220723110626-6.png||height="681" width="511"]]
371 371  
372 -== 3.3  Specification ==
373 373  
374 -* CPU: 32-bit 48 MHz
375 -* Flash: 256KB
376 -* RAM: 64KB
377 -* Input Power Range: 5v
378 -* Frequency Range: 150 MHz ~~ 960 MHz
379 -* Maximum Power +22 dBm constant RF output
380 -* High sensitivity: -148 dBm
381 -* Temperature:
382 -** Storage: -55 ~~ +125℃
383 -** Operating: -40 ~~ +85℃
384 -* Humidity:
385 -** Storage: 5 ~~ 95% (Non-Condensing)
386 -** Operating: 10 ~~ 95% (Non-Condensing)
387 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
388 -* LoRa Rx current: <9 mA
319 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
389 389  
390 390  
322 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
391 391  
392 -== 3.4  Pin Mapping & LED ==
393 393  
325 +[[image:image-20220723134549-8.png]]
394 394  
395 395  
396 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
397 397  
329 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
398 398  
399 -(((
400 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
401 -)))
402 402  
332 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
403 403  
404 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
334 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
405 405  
336 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
406 406  
407 -[[image:image-20220602171217-1.png||height="538" width="800"]]
338 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
408 408  
409 409  
410 -Open the serial port tool
341 +Example output in NodeRed is as below:
411 411  
412 -[[image:image-20220602161617-8.png]]
343 +[[image:image-20220723144339-1.png]]
413 413  
414 -[[image:image-20220602161718-9.png||height="457" width="800"]]
415 415  
346 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
416 416  
348 +=== 1.10.1 LA66V1 Update method ===
417 417  
418 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
350 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
419 419  
420 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
352 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
421 421  
354 +**Firmware download:**
422 422  
423 -[[image:image-20220602161935-10.png||height="498" width="800"]]
356 +[[Firmware - Dropbox>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AABJQUWNgt61Z567OcUf-sIya/LA66%20LoRaWAN%20module/Firmware?dl=0&subfolder_nav_tracking=1]]
424 424  
358 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
425 425  
360 +[[image:image-20220723150132-2.png||height="514" width="506"]]
426 426  
427 -(% style="color:blue" %)**3. See Uplink Command**
428 428  
429 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
363 +(% class="wikigeneratedid" id="HOpentheUpgradetool28TremoProgrammer29inPCandUpgrade" %)
364 +(% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**
430 430  
431 -example: AT+SENDB=01,02,8,05820802581ea0a5
366 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
432 432  
433 -[[image:image-20220602162157-11.png||height="497" width="800"]]
368 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
434 434  
370 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png" height="486" width="390"]]
435 435  
436 436  
437 -(% style="color:blue" %)**4. Check to see if TTN received the message**
373 +**2.  Select the COM port corresponding to USB TTL**
438 438  
439 -[[image:image-20220602162331-12.png||height="420" width="800"]]
375 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png" height="291" width="389"]]
440 440  
441 441  
378 +**3.  Select the bin file to burn**
442 442  
443 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
380 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png" height="318" width="405"]]
444 444  
382 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png" height="330" width="579"]]
445 445  
446 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
384 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png" height="290" width="372"]]
447 447  
448 448  
449 -(% style="color:red" %)**Preconditions:**
387 +**4.  Click to start the download**
450 450  
451 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
389 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png" height="462" width="372"]]
452 452  
453 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
454 454  
392 +**5.  Check update process**
455 455  
394 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png" height="483" width="386"]]
456 456  
457 -(% style="color:blue" %)**Steps for usage:**
458 458  
459 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
397 +**The following picture shows that the burning is successful**
460 460  
461 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
399 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png" height="513" width="406"]]
462 462  
463 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
401 +=== 1.10.2 LA66V2 Update method ===
464 464  
465 465  
404 +**Firmware download（Please select withbootloader version）:**
466 466  
467 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
406 +[[Firmware - Dropbox>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AABJQUWNgt61Z567OcUf-sIya/LA66%20LoRaWAN%20module/Firmware?dl=0&subfolder_nav_tracking=1]]
468 468  
469 469  
470 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
409 +**Firmware update method:**
471 471  
411 +Please refer to this link
472 472  
473 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
413 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]
474 474  
475 -[[image:image-20220602171233-2.png||height="538" width="800"]]
476 476  
416 += 2.  FAQ =
477 477  
418 +== 2.1  How to Compile Source Code for LA66? ==
478 478  
479 -(% style="color:blue" %)**2. Install Minicom in RPi.**
480 480  
481 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
421 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
482 482  
483 - (% style="background-color:yellow" %)**apt update**
484 484  
485 - (% style="background-color:yellow" %)**apt install minicom**
424 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
486 486  
487 487  
488 -Use minicom to connect to the RPI's terminal
427 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
489 489  
490 -[[image:image-20220602153146-3.png||height="439" width="500"]]
491 491  
430 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
492 492  
493 493  
494 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
433 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
495 495  
496 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
497 497  
436 +== 2.4 How to use external antenna via ipex connector? ==
498 498  
499 -[[image:image-20220602154928-5.png||height="436" width="500"]]
500 500  
439 +You need to remove the spring antenna first, and also remove the resistor and capacitor.
440 +Connect external antenna.
501 501  
442 +[[image:image-20231129155939-1.png||height="529" width="397"]]
502 502  
503 -(% style="color:blue" %)**4. Send Uplink message**
504 504  
505 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
445 += 3.  Order Info =
506 506  
507 -example: AT+SENDB=01,02,8,05820802581ea0a5
508 508  
448 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
509 509  
510 -[[image:image-20220602160339-6.png||height="517" width="600"]]
511 511  
451 +(% style="color:blue" %)**XXX**(%%): The default frequency band
512 512  
453 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
454 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
455 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
456 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
457 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
458 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
459 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
460 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
461 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
513 513  
514 -Check to see if TTN received the message
463 += 4.  Reference =
515 515  
516 -[[image:image-20220602160627-7.png||height="369" width="800"]]
517 517  
466 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
467 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
518 518  
469 += 5.  FCC Statement =
519 519  
520 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
521 521  
472 +(% style="color:red" %)**FCC Caution:**
522 522  
474 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
523 523  
524 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
476 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
525 525  
526 526  
479 +(% style="color:red" %)**IMPORTANT NOTE: **
527 527  
481 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
528 528  
529 -= 4.  Order Info =
483 +—Reorient or relocate the receiving antenna.
530 530  
485 +—Increase the separation between the equipment and receiver.
531 531  
532 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
487 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
533 533  
489 +—Consult the dealer or an experienced radio/TV technician for help.
534 534  
535 -(% style="color:blue" %)**XXX**(%%): The default frequency band
536 536  
537 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
538 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
539 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
540 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
541 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
542 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
543 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
544 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
545 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
492 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
546 546  
494 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
547 547  
548 -= 5.  Reference =
549 -
550 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
496 +
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20231129155939-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +4.6 MB
Content
image-20240101111021-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +11.2 KB
Content
image-20240101111030-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +11.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0