Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 100.6 >
edited by Xiaoling
on 2022/07/19 11:49
To version < 161.2 >
edited by Xiaoling
on 2023/06/10 08:47
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,37 +40,36 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
65 65  
66 66  
67 67  == 1.3  Specification ==
68 68  
59 +
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
72 -* Input Power Range: 1.8v ~~ 3.7v
73 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
74 74  * Frequency Range: 150 MHz ~~ 960 MHz
75 75  * Maximum Power +22 dBm constant RF output
76 76  * High sensitivity: -148 dBm
... ... @@ -82,456 +82,374 @@
82 82  ** Operating: 10 ~~ 95% (Non-Condensing)
83 83  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
84 84  * LoRa Rx current: <9 mA
85 -* I/O Voltage: 3.3v
86 86  
87 87  
88 88  
89 -== 1.4  AT Command ==
78 +== 1.4  Pin Mapping & LED ==
90 90  
91 91  
92 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
81 +[[image:image-20220813183239-3.png||height="526" width="662"]]
93 93  
94 94  
84 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
95 95  
96 -== 1.5  Dimension ==
97 97  
98 -[[image:image-20220718094750-3.png]]
87 +(((
88 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
99 99  
90 +
91 +)))
100 100  
93 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
101 101  
102 -== 1.6  Pin Mapping ==
95 +[[image:image-20220723100027-1.png]]
103 103  
104 104  
105 -[[image:image-20220719093156-1.png]]
98 +Open the serial port tool
106 106  
100 +[[image:image-20220602161617-8.png]]
107 107  
108 108  
109 -== 1.7  Land Pattern ==
103 +[[image:image-20220602161718-9.png||height="457" width="800"]]
110 110  
111 -[[image:image-20220517072821-2.png]]
112 112  
106 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
113 113  
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
114 114  
115 -= 2.  LA66 LoRaWAN Shield =
110 +[[image:image-20220602161935-10.png||height="498" width="800"]]
116 116  
117 117  
118 -== 2.1  Overview ==
113 +(% style="color:blue" %)**3.  See Uplink Command**
119 119  
115 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
120 120  
121 -(((
122 -[[image:image-20220715000826-2.png||height="145" width="220"]]
123 -)))
117 +example: AT+SENDB=01,02,8,05820802581ea0a5
124 124  
125 -(((
126 -
127 -)))
119 +[[image:image-20220602162157-11.png||height="497" width="800"]]
128 128  
129 -(((
130 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
131 -)))
132 132  
133 -(((
134 -(((
135 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
136 -)))
137 -)))
122 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
138 138  
139 -(((
140 -(((
141 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
142 -)))
143 -)))
124 +[[image:image-20220817093644-1.png]]
144 144  
145 -(((
146 -(((
147 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
148 -)))
149 -)))
150 150  
151 -(((
152 -(((
153 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
154 -)))
155 -)))
127 +== 1.6  Example: How to join helium ==
156 156  
157 157  
130 +(% style="color:blue" %)**1.  Create a new device.**
158 158  
159 -== 2.2  Features ==
132 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
160 160  
161 -* Arduino Shield base on LA66 LoRaWAN module
162 -* Support LoRaWAN v1.0.4 protocol
163 -* Support peer-to-peer protocol
164 -* TCXO crystal to ensure RF performance on low temperature
165 -* SMA connector
166 -* Available in different frequency LoRaWAN frequency bands.
167 -* World-wide unique OTAA keys.
168 -* AT Command via UART-TTL interface
169 -* Firmware upgradable via UART interface
170 -* Ultra-long RF range
171 171  
135 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
172 172  
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
173 173  
174 -== 2.3  Specification ==
175 175  
176 -* CPU: 32-bit 48 MHz
177 -* Flash: 256KB
178 -* RAM: 64KB
179 -* Input Power Range: 1.8v ~~ 3.7v
180 -* Power Consumption: < 4uA.
181 -* Frequency Range: 150 MHz ~~ 960 MHz
182 -* Maximum Power +22 dBm constant RF output
183 -* High sensitivity: -148 dBm
184 -* Temperature:
185 -** Storage: -55 ~~ +125℃
186 -** Operating: -40 ~~ +85℃
187 -* Humidity:
188 -** Storage: 5 ~~ 95% (Non-Condensing)
189 -** Operating: 10 ~~ 95% (Non-Condensing)
190 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
191 -* LoRa Rx current: <9 mA
192 -* I/O Voltage: 3.3v
140 +(% style="color:blue" %)**3.  Use AT commands.**
193 193  
142 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
194 194  
195 195  
196 -== 2.4  Pin Mapping & LED ==
145 +(% style="color:blue" %)**4.  Use the serial port tool**
197 197  
147 +[[image:image-20220909151517-2.png||height="543" width="708"]]
198 198  
199 199  
200 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
150 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
201 201  
152 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
202 202  
203 203  
204 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
155 +(% style="color:blue" %)**6.  Network successfully.**
205 205  
157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
206 206  
207 207  
208 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
160 +(% style="color:blue" %)**7.  Send uplink using command**
209 209  
162 +[[image:image-20220912085244-1.png]]
210 210  
164 +[[image:image-20220912085307-2.png]]
211 211  
212 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
213 213  
167 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
214 214  
215 -=== 2.8.1  Items needed for update ===
216 216  
217 -1. LA66 LoRaWAN Shield
218 -1. Arduino
219 -1. USB TO TTL Adapter
170 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
220 220  
221 -[[image:image-20220602100052-2.png||height="385" width="600"]]
222 222  
173 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
223 223  
224 -=== 2.8.2  Connection ===
175 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
225 225  
226 226  
227 -[[image:image-20220602101311-3.png||height="276" width="600"]]
178 +(% style="color:red" %)**Preconditions:**
228 228  
180 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
229 229  
230 -(((
231 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
232 -)))
182 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
233 233  
234 -(((
235 -(% style="background-color:yellow" %)**GND  <-> GND
236 -TXD  <->  TXD
237 -RXD  <->  RXD**
238 -)))
239 239  
240 240  
241 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
186 +(% style="color:blue" %)**Steps for usage:**
242 242  
243 -Connect USB TTL Adapter to PC after connecting the wires
188 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
244 244  
190 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
245 245  
246 -[[image:image-20220602102240-4.png||height="304" width="600"]]
192 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
247 247  
248 248  
249 -=== 2.8.3  Upgrade steps ===
195 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
250 250  
251 251  
252 -==== 1.  Switch SW1 to put in ISP position ====
198 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
253 253  
254 254  
255 -[[image:image-20220602102824-5.png||height="306" width="600"]]
201 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
256 256  
257 257  
204 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
258 258  
259 -==== 2.  Press the RST switch once ====
206 +[[image:image-20220723100439-2.png]]
260 260  
261 261  
262 -[[image:image-20220602104701-12.png||height="285" width="600"]]
209 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
263 263  
211 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
264 264  
213 + (% style="background-color:yellow" %)**apt update**
265 265  
266 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
215 + (% style="background-color:yellow" %)**apt install minicom**
267 267  
217 +Use minicom to connect to the RPI's terminal
268 268  
269 -(((
270 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
271 -)))
219 +[[image:image-20220602153146-3.png||height="439" width="500"]]
272 272  
273 273  
274 -[[image:image-20220602103227-6.png]]
222 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
275 275  
224 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
276 276  
277 -[[image:image-20220602103357-7.png]]
226 +[[image:image-20220602154928-5.png||height="436" width="500"]]
278 278  
279 279  
229 +(% style="color:blue" %)**4.  Send Uplink message**
280 280  
281 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
282 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
231 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
283 283  
233 +example: AT+SENDB=01,02,8,05820802581ea0a5
284 284  
285 -[[image:image-20220602103844-8.png]]
235 +[[image:image-20220602160339-6.png||height="517" width="600"]]
286 286  
287 287  
288 288  
289 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
290 -(% style="color:blue" %)**3. Select the bin file to burn**
239 +Check to see if TTN received the message
291 291  
292 292  
293 -[[image:image-20220602104144-9.png]]
242 +[[image:image-20220602160627-7.png||height="369" width="800"]]
294 294  
295 295  
296 -[[image:image-20220602104251-10.png]]
245 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
297 297  
247 +=== 1.9.1  Hardware and Software Connection ===
298 298  
299 -[[image:image-20220602104402-11.png]]
300 300  
301 301  
251 +==== (% style="color:blue" %)**Overview：**(%%) ====
302 302  
303 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
304 -(% style="color:blue" %)**4. Click to start the download**
305 305  
306 -[[image:image-20220602104923-13.png]]
254 +(((
255 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
307 307  
257 +* Send real-time location information of mobile phone to LoRaWAN network.
258 +* Check LoRaWAN network signal strengh.
259 +* Manually send messages to LoRaWAN network.
260 +)))
308 308  
309 309  
310 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
311 -(% style="color:blue" %)**5. Check update process**
312 312  
313 313  
314 -[[image:image-20220602104948-14.png]]
265 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
315 315  
316 316  
268 +A USB to Type-C adapter is needed to connect to a Mobile phone.
317 317  
318 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
319 -(% style="color:blue" %)**The following picture shows that the burning is successful**
270 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
320 320  
321 -[[image:image-20220602105251-15.png]]
272 +[[image:image-20220813174353-2.png||height="360" width="313"]]
322 322  
323 323  
324 324  
325 -= 3.  LA66 USB LoRaWAN Adapter =
276 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
326 326  
327 327  
328 -== 3.1  Overview ==
279 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
329 329  
330 330  
331 -[[image:image-20220715001142-3.png||height="145" width="220"]]
282 +[[image:image-20220813173738-1.png]]
332 332  
333 333  
334 -(((
335 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
336 -)))
337 337  
338 -(((
339 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
340 -)))
286 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
341 341  
342 -(((
343 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
344 -)))
345 345  
346 -(((
347 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
348 -)))
289 +Function and page introduction
349 349  
350 -(((
351 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
352 -)))
353 353  
292 +[[image:image-20220723113448-7.png||height="995" width="450"]]
354 354  
355 355  
356 -== 3.2  Features ==
295 +(% style="color:blue" %)**Block Explain:**
357 357  
358 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
359 -* Ultra-long RF range
360 -* Support LoRaWAN v1.0.4 protocol
361 -* Support peer-to-peer protocol
362 -* TCXO crystal to ensure RF performance on low temperature
363 -* Spring RF antenna
364 -* Available in different frequency LoRaWAN frequency bands.
365 -* World-wide unique OTAA keys.
366 -* AT Command via UART-TTL interface
367 -* Firmware upgradable via UART interface
368 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
297 +1.  Display LA66 USB LoRaWAN Module connection status
369 369  
299 +2.  Check and reconnect
370 370  
301 +3.  Turn send timestamps on or off
371 371  
372 -== 3.3  Specification ==
303 +4.  Display LoRaWan connection status
373 373  
374 -* CPU: 32-bit 48 MHz
375 -* Flash: 256KB
376 -* RAM: 64KB
377 -* Input Power Range: 5v
378 -* Frequency Range: 150 MHz ~~ 960 MHz
379 -* Maximum Power +22 dBm constant RF output
380 -* High sensitivity: -148 dBm
381 -* Temperature:
382 -** Storage: -55 ~~ +125℃
383 -** Operating: -40 ~~ +85℃
384 -* Humidity:
385 -** Storage: 5 ~~ 95% (Non-Condensing)
386 -** Operating: 10 ~~ 95% (Non-Condensing)
387 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
388 -* LoRa Rx current: <9 mA
305 +5.  Check LoRaWan connection status
389 389  
307 +6.  The RSSI value of the node when the ACK is received
390 390  
309 +7.  Node's Signal Strength Icon
391 391  
392 -== 3.4  Pin Mapping & LED ==
311 +8.  Configure Location Uplink Interval
393 393  
313 +9.  AT command input box
394 394  
315 +10.  Send Button:  Send input box info to LA66 USB Adapter
395 395  
396 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
317 +11.  Output Log from LA66 USB adapter
397 397  
319 +12.  clear log button
398 398  
399 -(((
400 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
401 -)))
321 +13.  exit button
402 402  
403 403  
404 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
405 405  
325 +LA66 USB LoRaWAN Module not connected
406 406  
407 -[[image:image-20220602171217-1.png||height="538" width="800"]]
408 408  
328 +[[image:image-20220723110520-5.png||height="677" width="508"]]
409 409  
410 -Open the serial port tool
411 411  
412 -[[image:image-20220602161617-8.png]]
413 413  
414 -[[image:image-20220602161718-9.png||height="457" width="800"]]
332 +Connect LA66 USB LoRaWAN Module
415 415  
416 416  
335 +[[image:image-20220723110626-6.png||height="681" width="511"]]
417 417  
418 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
419 419  
420 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
338 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
421 421  
422 422  
423 -[[image:image-20220602161935-10.png||height="498" width="800"]]
341 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
424 424  
425 425  
344 +[[image:image-20220723134549-8.png]]
426 426  
427 -(% style="color:blue" %)**3. See Uplink Command**
428 428  
429 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
430 430  
431 -example: AT+SENDB=01,02,8,05820802581ea0a5
348 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
432 432  
433 -[[image:image-20220602162157-11.png||height="497" width="800"]]
434 434  
351 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
435 435  
353 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
436 436  
437 -(% style="color:blue" %)**4. Check to see if TTN received the message**
355 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
438 438  
439 -[[image:image-20220602162331-12.png||height="420" width="800"]]
357 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
440 440  
441 441  
360 +Example output in NodeRed is as below:
442 442  
443 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
362 +[[image:image-20220723144339-1.png]]
444 444  
445 445  
446 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
365 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
447 447  
448 448  
449 -(% style="color:red" %)**Preconditions:**
368 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
450 450  
451 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
370 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
452 452  
453 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
372 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
454 454  
374 +[[image:image-20220723150132-2.png]]
455 455  
456 456  
457 -(% style="color:blue" %)**Steps for usage:**
458 458  
459 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
378 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
460 460  
461 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
462 462  
463 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
381 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
464 464  
383 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
465 465  
385 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
466 466  
467 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
468 468  
388 +**2.  Select the COM port corresponding to USB TTL**
469 469  
470 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
471 471  
472 472  
473 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
393 +**3.  Select the bin file to burn**
474 474  
475 -[[image:image-20220602171233-2.png||height="538" width="800"]]
395 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
476 476  
397 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
477 477  
399 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
478 478  
479 -(% style="color:blue" %)**2. Install Minicom in RPi.**
480 480  
481 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
402 +**4.  Click to start the download**
482 482  
483 - (% style="background-color:yellow" %)**apt update**
404 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
484 484  
485 - (% style="background-color:yellow" %)**apt install minicom**
486 486  
407 +**5.  Check update process**
487 487  
488 -Use minicom to connect to the RPI's terminal
409 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
489 489  
490 -[[image:image-20220602153146-3.png||height="439" width="500"]]
491 491  
412 +**The following picture shows that the burning is successful**
492 492  
414 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
493 493  
494 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
495 495  
496 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
417 += 2.  FAQ =
497 497  
419 +== 2.1  How to Compile Source Code for LA66? ==
498 498  
499 -[[image:image-20220602154928-5.png||height="436" width="500"]]
500 500  
422 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
501 501  
502 502  
503 -(% style="color:blue" %)**4. Send Uplink message**
425 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
504 504  
505 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
506 506  
507 -example: AT+SENDB=01,02,8,05820802581ea0a5
428 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
508 508  
509 509  
510 -[[image:image-20220602160339-6.png||height="517" width="600"]]
431 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
511 511  
512 512  
434 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
513 513  
514 -Check to see if TTN received the message
515 515  
516 -[[image:image-20220602160627-7.png||height="369" width="800"]]
437 += 3.  Order Info =
517 517  
518 518  
440 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
519 519  
520 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
521 521  
522 -
523 -
524 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
525 -
526 -
527 -
528 -
529 -= 4.  Order Info =
530 -
531 -
532 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
533 -
534 -
535 535  (% style="color:blue" %)**XXX**(%%): The default frequency band
536 536  
537 537  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -545,6 +545,40 @@
545 545  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
546 546  
547 547  
548 -= 5.  Reference =
549 549  
550 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
457 += 4.  Reference =
458 +
459 +
460 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
461 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
462 +
463 +
464 +
465 += 5.  FCC Statement =
466 +
467 +
468 +(% style="color:red" %)**FCC Caution:**
469 +
470 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
471 +
472 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
473 +
474 +
475 +(% style="color:red" %)**IMPORTANT NOTE: **
476 +
477 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
478 +
479 +—Reorient or relocate the receiving antenna.
480 +
481 +—Increase the separation between the equipment and receiver.
482 +
483 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 +
485 +—Consult the dealer or an experienced radio/TV technician for help.
486 +
487 +
488 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
489 +
490 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
491 +
492 +
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0