Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 100.4 >
edited by Xiaoling
on 2022/07/19 11:42
To version < 161.2 >
edited by Xiaoling
on 2023/06/10 08:47
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,36 +40,36 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
65 65  
56 +
66 66  == 1.3  Specification ==
67 67  
59 +
68 68  * CPU: 32-bit 48 MHz
69 69  * Flash: 256KB
70 70  * RAM: 64KB
71 -* Input Power Range: 1.8v ~~ 3.7v
72 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
73 73  * Frequency Range: 150 MHz ~~ 960 MHz
74 74  * Maximum Power +22 dBm constant RF output
75 75  * High sensitivity: -148 dBm
... ... @@ -81,441 +81,374 @@
81 81  ** Operating: 10 ~~ 95% (Non-Condensing)
82 82  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
83 83  * LoRa Rx current: <9 mA
84 -* I/O Voltage: 3.3v
85 85  
86 86  
87 -== 1.4  AT Command ==
88 88  
78 +== 1.4  Pin Mapping & LED ==
89 89  
90 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
81 +[[image:image-20220813183239-3.png||height="526" width="662"]]
92 92  
93 93  
94 -== 1.5  Dimension ==
84 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
95 95  
96 -[[image:image-20220718094750-3.png]]
97 97  
87 +(((
88 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
98 98  
90 +
91 +)))
99 99  
93 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
100 100  
101 -== 1.6  Pin Mapping ==
95 +[[image:image-20220723100027-1.png]]
102 102  
103 103  
104 -[[image:image-20220719093156-1.png]]
98 +Open the serial port tool
105 105  
100 +[[image:image-20220602161617-8.png]]
106 106  
107 107  
108 -== 1.7  Land Pattern ==
103 +[[image:image-20220602161718-9.png||height="457" width="800"]]
109 109  
110 -[[image:image-20220517072821-2.png]]
111 111  
106 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
112 112  
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
113 113  
114 -= 2.  LA66 LoRaWAN Shield =
110 +[[image:image-20220602161935-10.png||height="498" width="800"]]
115 115  
116 116  
117 -== 2.1  Overview ==
113 +(% style="color:blue" %)**3.  See Uplink Command**
118 118  
115 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
119 119  
120 -(((
121 -[[image:image-20220715000826-2.png||height="145" width="220"]]
122 -)))
117 +example: AT+SENDB=01,02,8,05820802581ea0a5
123 123  
124 -(((
125 -
126 -)))
119 +[[image:image-20220602162157-11.png||height="497" width="800"]]
127 127  
128 -(((
129 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
130 -)))
131 131  
132 -(((
133 -(((
134 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
135 -)))
136 -)))
122 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
137 137  
138 -(((
139 -(((
140 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
141 -)))
142 -)))
124 +[[image:image-20220817093644-1.png]]
143 143  
144 -(((
145 -(((
146 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
147 -)))
148 -)))
149 149  
150 -(((
151 -(((
152 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
153 -)))
154 -)))
127 +== 1.6  Example: How to join helium ==
155 155  
156 156  
130 +(% style="color:blue" %)**1.  Create a new device.**
157 157  
158 -== 2.2  Features ==
132 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
159 159  
160 -* Arduino Shield base on LA66 LoRaWAN module
161 -* Support LoRaWAN v1.0.4 protocol
162 -* Support peer-to-peer protocol
163 -* TCXO crystal to ensure RF performance on low temperature
164 -* SMA connector
165 -* Available in different frequency LoRaWAN frequency bands.
166 -* World-wide unique OTAA keys.
167 -* AT Command via UART-TTL interface
168 -* Firmware upgradable via UART interface
169 -* Ultra-long RF range
170 170  
135 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
171 171  
172 -== 2.3  Specification ==
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
173 173  
174 -* CPU: 32-bit 48 MHz
175 -* Flash: 256KB
176 -* RAM: 64KB
177 -* Input Power Range: 1.8v ~~ 3.7v
178 -* Power Consumption: < 4uA.
179 -* Frequency Range: 150 MHz ~~ 960 MHz
180 -* Maximum Power +22 dBm constant RF output
181 -* High sensitivity: -148 dBm
182 -* Temperature:
183 -** Storage: -55 ~~ +125℃
184 -** Operating: -40 ~~ +85℃
185 -* Humidity:
186 -** Storage: 5 ~~ 95% (Non-Condensing)
187 -** Operating: 10 ~~ 95% (Non-Condensing)
188 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
189 -* LoRa Rx current: <9 mA
190 -* I/O Voltage: 3.3v
191 191  
140 +(% style="color:blue" %)**3.  Use AT commands.**
192 192  
193 -== 2.4  Pin Mapping & LED ==
142 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
194 194  
195 195  
145 +(% style="color:blue" %)**4.  Use the serial port tool**
196 196  
197 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
147 +[[image:image-20220909151517-2.png||height="543" width="708"]]
198 198  
199 199  
150 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
200 200  
201 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
152 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
202 202  
203 203  
155 +(% style="color:blue" %)**6.  Network successfully.**
204 204  
205 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
206 206  
207 207  
160 +(% style="color:blue" %)**7.  Send uplink using command**
208 208  
209 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
162 +[[image:image-20220912085244-1.png]]
210 210  
164 +[[image:image-20220912085307-2.png]]
211 211  
212 -=== 2.8.1  Items needed for update ===
213 213  
214 -1. LA66 LoRaWAN Shield
215 -1. Arduino
216 -1. USB TO TTL Adapter
167 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
217 217  
218 218  
219 -[[image:image-20220602100052-2.png||height="385" width="600"]]
170 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
220 220  
221 221  
222 -=== 2.8.2  Connection ===
173 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
223 223  
175 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
224 224  
225 -[[image:image-20220602101311-3.png||height="276" width="600"]]
226 226  
178 +(% style="color:red" %)**Preconditions:**
227 227  
228 -(((
229 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
230 -)))
180 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
231 231  
232 -(((
233 -(% style="background-color:yellow" %)**GND  <-> GND
234 -TXD  <->  TXD
235 -RXD  <->  RXD**
236 -)))
182 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
237 237  
238 238  
239 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
240 240  
241 -Connect USB TTL Adapter to PC after connecting the wires
186 +(% style="color:blue" %)**Steps for usage:**
242 242  
188 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
243 243  
244 -[[image:image-20220602102240-4.png||height="304" width="600"]]
190 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
245 245  
192 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
246 246  
247 -=== 2.8.3  Upgrade steps ===
248 248  
195 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
249 249  
250 -==== 1.  Switch SW1 to put in ISP position ====
251 251  
198 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
252 252  
253 -[[image:image-20220602102824-5.png||height="306" width="600"]]
254 254  
201 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
255 255  
256 256  
257 -==== 2.  Press the RST switch once ====
204 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
258 258  
206 +[[image:image-20220723100439-2.png]]
259 259  
260 -[[image:image-20220602104701-12.png||height="285" width="600"]]
261 261  
209 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
262 262  
211 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
263 263  
264 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
213 + (% style="background-color:yellow" %)**apt update**
265 265  
215 + (% style="background-color:yellow" %)**apt install minicom**
266 266  
267 -(((
268 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
269 -)))
217 +Use minicom to connect to the RPI's terminal
270 270  
219 +[[image:image-20220602153146-3.png||height="439" width="500"]]
271 271  
272 -[[image:image-20220602103227-6.png]]
273 273  
222 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
274 274  
275 -[[image:image-20220602103357-7.png]]
224 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
276 276  
226 +[[image:image-20220602154928-5.png||height="436" width="500"]]
277 277  
278 278  
279 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
280 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
229 +(% style="color:blue" %)**4.  Send Uplink message**
281 281  
231 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
282 282  
283 -[[image:image-20220602103844-8.png]]
233 +example: AT+SENDB=01,02,8,05820802581ea0a5
284 284  
235 +[[image:image-20220602160339-6.png||height="517" width="600"]]
285 285  
286 286  
287 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
288 -(% style="color:blue" %)**3. Select the bin file to burn**
289 289  
239 +Check to see if TTN received the message
290 290  
291 -[[image:image-20220602104144-9.png]]
292 292  
242 +[[image:image-20220602160627-7.png||height="369" width="800"]]
293 293  
294 -[[image:image-20220602104251-10.png]]
295 295  
245 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
296 296  
297 -[[image:image-20220602104402-11.png]]
247 +=== 1.9.1  Hardware and Software Connection ===
298 298  
299 299  
300 300  
301 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
302 -(% style="color:blue" %)**4. Click to start the download**
251 +==== (% style="color:blue" %)**Overview：**(%%) ====
303 303  
304 -[[image:image-20220602104923-13.png]]
305 305  
254 +(((
255 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
306 306  
257 +* Send real-time location information of mobile phone to LoRaWAN network.
258 +* Check LoRaWAN network signal strengh.
259 +* Manually send messages to LoRaWAN network.
260 +)))
307 307  
308 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
309 -(% style="color:blue" %)**5. Check update process**
310 310  
311 311  
312 -[[image:image-20220602104948-14.png]]
313 313  
265 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
314 314  
315 315  
316 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
317 -(% style="color:blue" %)**The following picture shows that the burning is successful**
268 +A USB to Type-C adapter is needed to connect to a Mobile phone.
318 318  
319 -[[image:image-20220602105251-15.png]]
270 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
320 320  
272 +[[image:image-20220813174353-2.png||height="360" width="313"]]
321 321  
322 322  
323 -= 3.  LA66 USB LoRaWAN Adapter =
324 324  
276 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
325 325  
326 -== 3.1  Overview ==
327 327  
279 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
328 328  
329 -[[image:image-20220715001142-3.png||height="145" width="220"]]
330 330  
282 +[[image:image-20220813173738-1.png]]
331 331  
332 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
333 333  
334 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 335  
336 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
286 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
337 337  
338 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
339 339  
340 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
289 +Function and page introduction
341 341  
342 342  
292 +[[image:image-20220723113448-7.png||height="995" width="450"]]
343 343  
344 -== 3.2  Features ==
345 345  
346 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
347 -* Ultra-long RF range
348 -* Support LoRaWAN v1.0.4 protocol
349 -* Support peer-to-peer protocol
350 -* TCXO crystal to ensure RF performance on low temperature
351 -* Spring RF antenna
352 -* Available in different frequency LoRaWAN frequency bands.
353 -* World-wide unique OTAA keys.
354 -* AT Command via UART-TTL interface
355 -* Firmware upgradable via UART interface
356 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
295 +(% style="color:blue" %)**Block Explain:**
357 357  
297 +1.  Display LA66 USB LoRaWAN Module connection status
358 358  
359 -== 3.3  Specification ==
299 +2.  Check and reconnect
360 360  
361 -* CPU: 32-bit 48 MHz
362 -* Flash: 256KB
363 -* RAM: 64KB
364 -* Input Power Range: 5v
365 -* Frequency Range: 150 MHz ~~ 960 MHz
366 -* Maximum Power +22 dBm constant RF output
367 -* High sensitivity: -148 dBm
368 -* Temperature:
369 -** Storage: -55 ~~ +125℃
370 -** Operating: -40 ~~ +85℃
371 -* Humidity:
372 -** Storage: 5 ~~ 95% (Non-Condensing)
373 -** Operating: 10 ~~ 95% (Non-Condensing)
374 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
375 -* LoRa Rx current: <9 mA
301 +3.  Turn send timestamps on or off
376 376  
303 +4.  Display LoRaWan connection status
377 377  
378 -== 3.4  Pin Mapping & LED ==
305 +5.  Check LoRaWan connection status
379 379  
307 +6.  The RSSI value of the node when the ACK is received
380 380  
309 +7.  Node's Signal Strength Icon
381 381  
382 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
311 +8.  Configure Location Uplink Interval
383 383  
313 +9.  AT command input box
384 384  
385 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
315 +10.  Send Button:  Send input box info to LA66 USB Adapter
386 386  
317 +11.  Output Log from LA66 USB adapter
387 387  
388 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
319 +12.  clear log button
389 389  
321 +13.  exit button
390 390  
391 -[[image:image-20220602171217-1.png||height="538" width="800"]]
392 392  
393 393  
394 -Open the serial port tool
325 +LA66 USB LoRaWAN Module not connected
395 395  
396 -[[image:image-20220602161617-8.png]]
397 397  
398 -[[image:image-20220602161718-9.png||height="457" width="800"]]
328 +[[image:image-20220723110520-5.png||height="677" width="508"]]
399 399  
400 400  
401 401  
402 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
332 +Connect LA66 USB LoRaWAN Module
403 403  
404 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
405 405  
335 +[[image:image-20220723110626-6.png||height="681" width="511"]]
406 406  
407 -[[image:image-20220602161935-10.png||height="498" width="800"]]
408 408  
338 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
409 409  
410 410  
411 -(% style="color:blue" %)**3. See Uplink Command**
341 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
412 412  
413 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
414 414  
415 -example: AT+SENDB=01,02,8,05820802581ea0a5
344 +[[image:image-20220723134549-8.png]]
416 416  
417 -[[image:image-20220602162157-11.png||height="497" width="800"]]
418 418  
419 419  
348 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
420 420  
421 -(% style="color:blue" %)**4. Check to see if TTN received the message**
422 422  
423 -[[image:image-20220602162331-12.png||height="420" width="800"]]
351 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
424 424  
353 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
425 425  
355 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
426 426  
427 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
357 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
428 428  
429 429  
430 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
360 +Example output in NodeRed is as below:
431 431  
362 +[[image:image-20220723144339-1.png]]
432 432  
433 -(% style="color:red" %)**Preconditions:**
434 434  
435 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
365 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
436 436  
437 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
438 438  
368 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
439 439  
370 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
440 440  
441 -(% style="color:blue" %)**Steps for usage:**
372 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
442 442  
443 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
374 +[[image:image-20220723150132-2.png]]
444 444  
445 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
446 446  
447 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
448 448  
378 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
449 449  
450 450  
451 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
381 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
452 452  
383 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
453 453  
454 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
385 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
455 455  
456 456  
457 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
388 +**2.  Select the COM port corresponding to USB TTL**
458 458  
459 -[[image:image-20220602171233-2.png||height="538" width="800"]]
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
460 460  
461 461  
393 +**3.  Select the bin file to burn**
462 462  
463 -(% style="color:blue" %)**2. Install Minicom in RPi.**
395 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
464 464  
465 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
397 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
466 466  
467 - (% style="background-color:yellow" %)**apt update**
399 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
468 468  
469 - (% style="background-color:yellow" %)**apt install minicom**
470 470  
402 +**4.  Click to start the download**
471 471  
472 -Use minicom to connect to the RPI's terminal
404 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
473 473  
474 -[[image:image-20220602153146-3.png||height="439" width="500"]]
475 475  
407 +**5.  Check update process**
476 476  
409 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
477 477  
478 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
479 479  
480 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
412 +**The following picture shows that the burning is successful**
481 481  
414 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
482 482  
483 -[[image:image-20220602154928-5.png||height="436" width="500"]]
484 484  
417 += 2.  FAQ =
485 485  
419 +== 2.1  How to Compile Source Code for LA66? ==
486 486  
487 -(% style="color:blue" %)**4. Send Uplink message**
488 488  
489 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
422 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
490 490  
491 -example: AT+SENDB=01,02,8,05820802581ea0a5
492 492  
425 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
493 493  
494 -[[image:image-20220602160339-6.png||height="517" width="600"]]
495 495  
428 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
496 496  
497 497  
498 -Check to see if TTN received the message
431 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
499 499  
500 -[[image:image-20220602160627-7.png||height="369" width="800"]]
501 501  
434 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
502 502  
503 503  
504 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
437 += 3.  Order Info =
505 505  
506 506  
440 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
507 507  
508 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
509 509  
510 -
511 -
512 -
513 -= 4.  Order Info =
514 -
515 -
516 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
517 -
518 -
519 519  (% style="color:blue" %)**XXX**(%%): The default frequency band
520 520  
521 521  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -529,6 +529,40 @@
529 529  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
530 530  
531 531  
532 -= 5.  Reference =
533 533  
534 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
457 += 4.  Reference =
458 +
459 +
460 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
461 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
462 +
463 +
464 +
465 += 5.  FCC Statement =
466 +
467 +
468 +(% style="color:red" %)**FCC Caution:**
469 +
470 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
471 +
472 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
473 +
474 +
475 +(% style="color:red" %)**IMPORTANT NOTE: **
476 +
477 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
478 +
479 +—Reorient or relocate the receiving antenna.
480 +
481 +—Increase the separation between the equipment and receiver.
482 +
483 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 +
485 +—Consult the dealer or an experienced radio/TV technician for help.
486 +
487 +
488 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
489 +
490 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
491 +
492 +
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0