Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 100.4 >
edited by Xiaoling
on 2022/07/19 11:42
To version < 161.1 >
edited by Bei Jinggeng
on 2023/06/09 18:08
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -6,34 +6,25 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 -(((
21 -
22 -)))
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
23 23  
18 +
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
26 26  )))
27 -)))
28 28  
29 29  (((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 -)))
34 34  
35 35  (((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
39 39  
... ... @@ -40,36 +40,34 @@
40 40  (((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 -)))
44 44  
45 45  (((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 48  )))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
62 62  * Firmware upgradable via UART interface
63 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 64  
65 -
66 66  == 1.3  Specification ==
67 67  
57 +
68 68  * CPU: 32-bit 48 MHz
69 69  * Flash: 256KB
70 70  * RAM: 64KB
71 -* Input Power Range: 1.8v ~~ 3.7v
72 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
73 73  * Frequency Range: 150 MHz ~~ 960 MHz
74 74  * Maximum Power +22 dBm constant RF output
75 75  * High sensitivity: -148 dBm
... ... @@ -81,441 +81,397 @@
81 81  ** Operating: 10 ~~ 95% (Non-Condensing)
82 82  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
83 83  * LoRa Rx current: <9 mA
84 -* I/O Voltage: 3.3v
85 85  
74 +== 1.4  Pin Mapping & LED ==
86 86  
87 -== 1.4  AT Command ==
88 88  
77 +[[image:image-20220813183239-3.png||height="526" width="662"]]
89 89  
90 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
80 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
92 92  
93 93  
94 -== 1.5  Dimension ==
83 +(((
84 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
85 +)))
95 95  
96 -[[image:image-20220718094750-3.png]]
97 97  
88 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
98 98  
99 99  
91 +[[image:image-20220723100027-1.png]]
100 100  
101 -== 1.6  Pin Mapping ==
102 102  
94 +Open the serial port tool
103 103  
104 -[[image:image-20220719093156-1.png]]
96 +[[image:image-20220602161617-8.png]]
105 105  
106 106  
99 +[[image:image-20220602161718-9.png||height="457" width="800"]]
107 107  
108 -== 1.7  Land Pattern ==
109 109  
110 -[[image:image-20220517072821-2.png]]
111 111  
103 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
112 112  
113 113  
114 -= 2.  LA66 LoRaWAN Shield =
106 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
115 115  
116 116  
117 -== 2.1  Overview ==
109 +[[image:image-20220602161935-10.png||height="498" width="800"]]
118 118  
119 119  
120 -(((
121 -[[image:image-20220715000826-2.png||height="145" width="220"]]
122 -)))
123 123  
124 -(((
125 -
126 -)))
113 +(% style="color:blue" %)**3.  See Uplink Command**
127 127  
128 -(((
129 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
130 -)))
131 131  
132 -(((
133 -(((
134 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
135 -)))
136 -)))
116 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
137 137  
138 -(((
139 -(((
140 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
141 -)))
142 -)))
118 +example: AT+SENDB=01,02,8,05820802581ea0a5
143 143  
144 -(((
145 -(((
146 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
147 -)))
148 -)))
120 +[[image:image-20220602162157-11.png||height="497" width="800"]]
149 149  
150 -(((
151 -(((
152 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
153 -)))
154 -)))
155 155  
156 156  
124 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
157 157  
158 -== 2.2  Features ==
159 159  
160 -* Arduino Shield base on LA66 LoRaWAN module
161 -* Support LoRaWAN v1.0.4 protocol
162 -* Support peer-to-peer protocol
163 -* TCXO crystal to ensure RF performance on low temperature
164 -* SMA connector
165 -* Available in different frequency LoRaWAN frequency bands.
166 -* World-wide unique OTAA keys.
167 -* AT Command via UART-TTL interface
168 -* Firmware upgradable via UART interface
169 -* Ultra-long RF range
127 +[[image:image-20220817093644-1.png]]
170 170  
171 171  
172 -== 2.3  Specification ==
130 +== 1.6  Example: How to join helium ==
173 173  
174 -* CPU: 32-bit 48 MHz
175 -* Flash: 256KB
176 -* RAM: 64KB
177 -* Input Power Range: 1.8v ~~ 3.7v
178 -* Power Consumption: < 4uA.
179 -* Frequency Range: 150 MHz ~~ 960 MHz
180 -* Maximum Power +22 dBm constant RF output
181 -* High sensitivity: -148 dBm
182 -* Temperature:
183 -** Storage: -55 ~~ +125℃
184 -** Operating: -40 ~~ +85℃
185 -* Humidity:
186 -** Storage: 5 ~~ 95% (Non-Condensing)
187 -** Operating: 10 ~~ 95% (Non-Condensing)
188 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
189 -* LoRa Rx current: <9 mA
190 -* I/O Voltage: 3.3v
191 191  
192 192  
193 -== 2.4  Pin Mapping & LED ==
134 +(% style="color:blue" %)**1.  Create a new device.**
194 194  
195 195  
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
196 196  
197 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
198 198  
199 199  
141 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
200 200  
201 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
202 202  
144 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
203 203  
204 204  
205 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
206 206  
148 +(% style="color:blue" %)**3.  Use AT commands.**
207 207  
208 208  
209 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
151 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
210 210  
211 211  
212 -=== 2.8.1  Items needed for update ===
213 213  
214 -1. LA66 LoRaWAN Shield
215 -1. Arduino
216 -1. USB TO TTL Adapter
155 +(% style="color:blue" %)**4.  Use the serial port tool**
217 217  
218 218  
219 -[[image:image-20220602100052-2.png||height="385" width="600"]]
158 +[[image:image-20220909151517-2.png||height="543" width="708"]]
220 220  
221 221  
222 -=== 2.8.2  Connection ===
223 223  
162 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
224 224  
225 -[[image:image-20220602101311-3.png||height="276" width="600"]]
226 226  
165 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
227 227  
228 -(((
229 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
230 -)))
231 231  
232 -(((
233 -(% style="background-color:yellow" %)**GND  <-> GND
234 -TXD  <->  TXD
235 -RXD  <->  RXD**
236 -)))
237 237  
169 +(% style="color:blue" %)**6.  Network successfully.**
238 238  
239 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
240 240  
241 -Connect USB TTL Adapter to PC after connecting the wires
172 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
242 242  
243 243  
244 -[[image:image-20220602102240-4.png||height="304" width="600"]]
245 245  
176 +(% style="color:blue" %)**7.  Send uplink using command**
246 246  
247 -=== 2.8.3  Upgrade steps ===
248 248  
179 +[[image:image-20220912085244-1.png]]
249 249  
250 -==== 1.  Switch SW1 to put in ISP position ====
251 251  
182 +[[image:image-20220912085307-2.png]]
252 252  
253 -[[image:image-20220602102824-5.png||height="306" width="600"]]
254 254  
255 255  
186 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
256 256  
257 -==== 2.  Press the RST switch once ====
258 258  
189 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
259 259  
260 -[[image:image-20220602104701-12.png||height="285" width="600"]]
261 261  
192 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
262 262  
194 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
263 263  
264 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
265 265  
197 +(% style="color:red" %)**Preconditions:**
266 266  
267 -(((
268 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
269 -)))
199 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
270 270  
201 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
271 271  
272 -[[image:image-20220602103227-6.png]]
273 273  
274 274  
275 -[[image:image-20220602103357-7.png]]
205 +(% style="color:blue" %)**Steps for usage:**
276 276  
207 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
277 277  
209 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
278 278  
279 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
280 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
211 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
281 281  
282 282  
283 -[[image:image-20220602103844-8.png]]
214 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
284 284  
285 285  
217 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
286 286  
287 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
288 -(% style="color:blue" %)**3. Select the bin file to burn**
289 289  
220 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
290 290  
291 -[[image:image-20220602104144-9.png]]
292 292  
223 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
293 293  
294 -[[image:image-20220602104251-10.png]]
295 295  
226 +[[image:image-20220723100439-2.png]]
296 296  
297 -[[image:image-20220602104402-11.png]]
298 298  
299 299  
230 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
300 300  
301 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
302 -(% style="color:blue" %)**4. Click to start the download**
303 303  
304 -[[image:image-20220602104923-13.png]]
233 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
305 305  
235 + (% style="background-color:yellow" %)**apt update**
306 306  
237 + (% style="background-color:yellow" %)**apt install minicom**
307 307  
308 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
309 -(% style="color:blue" %)**5. Check update process**
310 310  
240 +Use minicom to connect to the RPI's terminal
311 311  
312 -[[image:image-20220602104948-14.png]]
242 +[[image:image-20220602153146-3.png||height="439" width="500"]]
313 313  
314 314  
315 315  
316 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
317 -(% style="color:blue" %)**The following picture shows that the burning is successful**
246 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
318 318  
319 -[[image:image-20220602105251-15.png]]
320 320  
249 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
321 321  
322 322  
323 -= 3.  LA66 USB LoRaWAN Adapter =
252 +[[image:image-20220602154928-5.png||height="436" width="500"]]
324 324  
325 325  
326 -== 3.1  Overview ==
327 327  
256 +(% style="color:blue" %)**4.  Send Uplink message**
328 328  
329 -[[image:image-20220715001142-3.png||height="145" width="220"]]
330 330  
259 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
331 331  
332 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
261 +example: AT+SENDB=01,02,8,05820802581ea0a5
333 333  
334 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 335  
336 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
264 +[[image:image-20220602160339-6.png||height="517" width="600"]]
337 337  
338 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
339 339  
340 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
341 341  
268 +Check to see if TTN received the message
342 342  
343 343  
344 -== 3.2  Features ==
271 +[[image:image-20220602160627-7.png||height="369" width="800"]]
345 345  
346 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
347 -* Ultra-long RF range
348 -* Support LoRaWAN v1.0.4 protocol
349 -* Support peer-to-peer protocol
350 -* TCXO crystal to ensure RF performance on low temperature
351 -* Spring RF antenna
352 -* Available in different frequency LoRaWAN frequency bands.
353 -* World-wide unique OTAA keys.
354 -* AT Command via UART-TTL interface
355 -* Firmware upgradable via UART interface
356 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
357 357  
274 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
358 358  
359 -== 3.3  Specification ==
276 +=== 1.9.1  Hardware and Software Connection ===
360 360  
361 -* CPU: 32-bit 48 MHz
362 -* Flash: 256KB
363 -* RAM: 64KB
364 -* Input Power Range: 5v
365 -* Frequency Range: 150 MHz ~~ 960 MHz
366 -* Maximum Power +22 dBm constant RF output
367 -* High sensitivity: -148 dBm
368 -* Temperature:
369 -** Storage: -55 ~~ +125℃
370 -** Operating: -40 ~~ +85℃
371 -* Humidity:
372 -** Storage: 5 ~~ 95% (Non-Condensing)
373 -** Operating: 10 ~~ 95% (Non-Condensing)
374 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
375 -* LoRa Rx current: <9 mA
376 376  
377 377  
378 -== 3.4  Pin Mapping & LED ==
280 +==== (% style="color:blue" %)**Overview：**(%%) ====
379 379  
380 380  
283 +(((
284 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
381 381  
382 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
286 +* Send real-time location information of mobile phone to LoRaWAN network.
287 +* Check LoRaWAN network signal strengh.
288 +* Manually send messages to LoRaWAN network.
289 +)))
383 383  
384 384  
385 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
386 386  
387 387  
388 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
294 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
389 389  
390 390  
391 -[[image:image-20220602171217-1.png||height="538" width="800"]]
297 +A USB to Type-C adapter is needed to connect to a Mobile phone.
392 392  
299 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
393 393  
394 -Open the serial port tool
301 +[[image:image-20220813174353-2.png||height="360" width="313"]]
395 395  
396 -[[image:image-20220602161617-8.png]]
397 397  
398 -[[image:image-20220602161718-9.png||height="457" width="800"]]
399 399  
305 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
400 400  
401 401  
402 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
308 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
403 403  
404 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
405 405  
311 +[[image:image-20220813173738-1.png]]
406 406  
407 -[[image:image-20220602161935-10.png||height="498" width="800"]]
408 408  
409 409  
315 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
410 410  
411 -(% style="color:blue" %)**3. See Uplink Command**
412 412  
413 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
318 +Function and page introduction
414 414  
415 -example: AT+SENDB=01,02,8,05820802581ea0a5
416 416  
417 -[[image:image-20220602162157-11.png||height="497" width="800"]]
321 +[[image:image-20220723113448-7.png||height="995" width="450"]]
418 418  
419 419  
324 +**Block Explain:**
420 420  
421 -(% style="color:blue" %)**4. Check to see if TTN received the message**
326 +1.  Display LA66 USB LoRaWAN Module connection status
422 422  
423 -[[image:image-20220602162331-12.png||height="420" width="800"]]
328 +2.  Check and reconnect
424 424  
330 +3.  Turn send timestamps on or off
425 425  
332 +4.  Display LoRaWan connection status
426 426  
427 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
334 +5.  Check LoRaWan connection status
428 428  
336 +6.  The RSSI value of the node when the ACK is received
429 429  
430 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
338 +7.  Node's Signal Strength Icon
431 431  
340 +8.  Configure Location Uplink Interval
432 432  
433 -(% style="color:red" %)**Preconditions:**
342 +9.  AT command input box
434 434  
435 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
344 +10.  Send Button:  Send input box info to LA66 USB Adapter
436 436  
437 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
346 +11.  Output Log from LA66 USB adapter
438 438  
348 +12.  clear log button
439 439  
350 +13.  exit button
440 440  
441 -(% style="color:blue" %)**Steps for usage:**
442 442  
443 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
444 444  
445 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
354 +LA66 USB LoRaWAN Module not connected
446 446  
447 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
448 448  
357 +[[image:image-20220723110520-5.png||height="677" width="508"]]
449 449  
450 450  
451 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
452 452  
361 +Connect LA66 USB LoRaWAN Module
453 453  
454 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
455 455  
364 +[[image:image-20220723110626-6.png||height="681" width="511"]]
456 456  
457 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
458 458  
459 -[[image:image-20220602171233-2.png||height="538" width="800"]]
367 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
460 460  
461 461  
370 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
462 462  
463 -(% style="color:blue" %)**2. Install Minicom in RPi.**
464 464  
465 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
373 +[[image:image-20220723134549-8.png]]
466 466  
467 - (% style="background-color:yellow" %)**apt update**
468 468  
469 - (% style="background-color:yellow" %)**apt install minicom**
470 470  
377 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
471 471  
472 -Use minicom to connect to the RPI's terminal
473 473  
474 -[[image:image-20220602153146-3.png||height="439" width="500"]]
380 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
475 475  
382 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
476 476  
384 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
477 477  
478 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
386 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
479 479  
480 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
481 481  
389 +Example output in NodeRed is as below:
482 482  
483 -[[image:image-20220602154928-5.png||height="436" width="500"]]
391 +[[image:image-20220723144339-1.png]]
484 484  
485 485  
394 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
486 486  
487 -(% style="color:blue" %)**4. Send Uplink message**
488 488  
489 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
397 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
490 490  
491 -example: AT+SENDB=01,02,8,05820802581ea0a5
399 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
492 492  
401 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
493 493  
494 -[[image:image-20220602160339-6.png||height="517" width="600"]]
403 +[[image:image-20220723150132-2.png]]
495 495  
405 +==== ** Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** ====
496 496  
407 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
497 497  
498 -Check to see if TTN received the message
409 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
499 499  
500 -[[image:image-20220602160627-7.png||height="369" width="800"]]
411 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
501 501  
413 +**2.  Select the COM port corresponding to USB TTL**
502 502  
415 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
503 503  
504 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
417 +**3.  Select the bin file to burn**
505 505  
419 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
506 506  
421 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
507 507  
508 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
423 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
509 509  
425 +**4.  Click to start the download**
510 510  
427 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
511 511  
429 +**5.  Check update process**
512 512  
513 -= 4.  Order Info =
431 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
514 514  
433 +**The following picture shows that the burning is successful**
515 515  
516 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
435 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
517 517  
437 += 2.  FAQ =
518 518  
439 +== 2.1  How to Compile Source Code for LA66? ==
440 +
441 +
442 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
443 +
444 +
445 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
446 +
447 +
448 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
449 +
450 +
451 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
452 +
453 +Set the AT+COMMAND:
454 +
455 +AT+UUID=666666666666
456 +
457 +
458 += 3.  Order Info =
459 +
460 +
461 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
462 +
463 +
519 519  (% style="color:blue" %)**XXX**(%%): The default frequency band
520 520  
521 521  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -528,7 +528,37 @@
528 528  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
529 529  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
530 530  
476 += 4.  Reference =
531 531  
532 -= 5.  Reference =
533 533  
534 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
479 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
480 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
481 +
482 += 5.  FCC Statement =
483 +
484 +
485 +(% style="color:red" %)**FCC Caution:**
486 +
487 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
488 +
489 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
490 +
491 +
492 +(% style="color:red" %)**IMPORTANT NOTE: **
493 +
494 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
495 +
496 +—Reorient or relocate the receiving antenna.
497 +
498 +—Increase the separation between the equipment and receiver.
499 +
500 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
501 +
502 +—Consult the dealer or an experienced radio/TV technician for help.
503 +
504 +
505 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
506 +
507 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
508 +
509 +
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0