Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 100.1 >
edited by Xiaoling
on 2022/07/19 09:34
To version < 157.2 >
edited by Xiaoling
on 2022/09/12 08:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,20 +6,23 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
14 +== 1.1  Overview ==
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
16 +
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
24 24  
25 25  (((
... ... @@ -35,27 +35,32 @@
35 35  )))
36 36  
37 37  
41 +
38 38  == 1.2  Features ==
39 39  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
40 40  * Support LoRaWAN v1.0.4 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
47 47  * Firmware upgradable via UART interface
48 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
49 49  
50 50  
51 51  
59 +
52 52  == 1.3  Specification ==
53 53  
62 +
54 54  * CPU: 32-bit 48 MHz
55 55  * Flash: 256KB
56 56  * RAM: 64KB
57 -* Input Power Range: 1.8v ~~ 3.7v
58 -* Power Consumption: < 4uA.
66 +* Input Power Range: 5v
59 59  * Frequency Range: 150 MHz ~~ 960 MHz
60 60  * Maximum Power +22 dBm constant RF output
61 61  * High sensitivity: -148 dBm
... ... @@ -67,419 +67,368 @@
67 67  ** Operating: 10 ~~ 95% (Non-Condensing)
68 68  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
69 69  * LoRa Rx current: <9 mA
70 -* I/O Voltage: 3.3v
71 71  
72 72  
73 73  
74 74  
75 -== 1.4  AT Command ==
82 +== 1.4  Pin Mapping & LED ==
76 76  
77 77  
78 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
85 +[[image:image-20220813183239-3.png||height="526" width="662"]]
79 79  
80 80  
81 81  
82 -== 1.5  Dimension ==
89 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
83 83  
84 -[[image:image-20220718094750-3.png]]
85 85  
92 +(((
93 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
94 +)))
86 86  
87 87  
97 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
88 88  
89 -== 1.6  Pin Mapping ==
90 90  
100 +[[image:image-20220723100027-1.png]]
91 91  
92 -[[image:image-20220523101537-1.png]]
93 93  
103 +Open the serial port tool
94 94  
105 +[[image:image-20220602161617-8.png]]
95 95  
96 -== 1.7  Land Pattern ==
97 97  
98 -[[image:image-20220517072821-2.png]]
108 +[[image:image-20220602161718-9.png||height="457" width="800"]]
99 99  
100 100  
101 101  
102 -= 2.  LA66 LoRaWAN Shield =
112 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
103 103  
104 104  
105 -== 2.1  Overview ==
115 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
106 106  
107 107  
108 -[[image:image-20220715000826-2.png||height="386" width="449"]]
118 +[[image:image-20220602161935-10.png||height="498" width="800"]]
109 109  
110 110  
111 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
112 112  
113 -(((
114 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
115 -)))
122 +(% style="color:blue" %)**3.  See Uplink Command**
116 116  
117 -(((
118 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
119 -)))
120 120  
121 -(((
122 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
123 -)))
125 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
124 124  
125 -(((
126 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
127 -)))
127 +example: AT+SENDB=01,02,8,05820802581ea0a5
128 128  
129 +[[image:image-20220602162157-11.png||height="497" width="800"]]
129 129  
130 -== 2.2  Features ==
131 131  
132 -* Arduino Shield base on LA66 LoRaWAN module
133 -* Support LoRaWAN v1.0.4 protocol
134 -* Support peer-to-peer protocol
135 -* TCXO crystal to ensure RF performance on low temperature
136 -* SMA connector
137 -* Available in different frequency LoRaWAN frequency bands.
138 -* World-wide unique OTAA keys.
139 -* AT Command via UART-TTL interface
140 -* Firmware upgradable via UART interface
141 -* Ultra-long RF range
142 142  
143 -== 2.3  Specification ==
133 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
144 144  
145 -* CPU: 32-bit 48 MHz
146 -* Flash: 256KB
147 -* RAM: 64KB
148 -* Input Power Range: 1.8v ~~ 3.7v
149 -* Power Consumption: < 4uA.
150 -* Frequency Range: 150 MHz ~~ 960 MHz
151 -* Maximum Power +22 dBm constant RF output
152 -* High sensitivity: -148 dBm
153 -* Temperature:
154 -** Storage: -55 ~~ +125℃
155 -** Operating: -40 ~~ +85℃
156 -* Humidity:
157 -** Storage: 5 ~~ 95% (Non-Condensing)
158 -** Operating: 10 ~~ 95% (Non-Condensing)
159 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
160 -* LoRa Rx current: <9 mA
161 -* I/O Voltage: 3.3v
162 162  
163 -== 2.4  Pin Mapping & LED ==
136 +[[image:image-20220817093644-1.png]]
164 164  
165 165  
166 166  
167 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
140 +== 1.6  Example: How to join helium ==
168 168  
169 169  
170 170  
171 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
144 +(% style="color:blue" %)**1.  Create a new device.**
172 172  
173 173  
147 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
174 174  
175 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
176 176  
177 177  
151 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
178 178  
179 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
180 180  
154 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
181 181  
182 -=== 2.8.1  Items needed for update ===
183 183  
184 -1. LA66 LoRaWAN Shield
185 -1. Arduino
186 -1. USB TO TTL Adapter
187 187  
188 -[[image:image-20220602100052-2.png||height="385" width="600"]]
158 +(% style="color:blue" %)**3.  Use AT commands.**
189 189  
190 190  
191 -=== 2.8.2  Connection ===
161 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
192 192  
193 193  
194 -[[image:image-20220602101311-3.png||height="276" width="600"]]
195 195  
165 +(% style="color:blue" %)**4.  Use the serial port tool**
196 196  
197 -(((
198 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
199 -)))
200 200  
201 -(((
202 -(% style="background-color:yellow" %)**GND  <-> GND
203 -TXD  <->  TXD
204 -RXD  <->  RXD**
205 -)))
168 +[[image:image-20220909151517-2.png||height="543" width="708"]]
206 206  
207 207  
208 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
209 209  
210 -Connect USB TTL Adapter to PC after connecting the wires
172 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
211 211  
212 212  
213 -[[image:image-20220602102240-4.png||height="304" width="600"]]
175 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
214 214  
215 215  
216 -=== 2.8.3  Upgrade steps ===
217 217  
179 +(% style="color:blue" %)**6.  Network successfully.**
218 218  
219 -==== 1.  Switch SW1 to put in ISP position ====
220 220  
182 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
221 221  
222 -[[image:image-20220602102824-5.png||height="306" width="600"]]
223 223  
224 224  
186 +(% style="color:blue" %)**7.  Send uplink using command**
225 225  
226 -==== 2.  Press the RST switch once ====
227 227  
189 +[[image:image-20220912085244-1.png]]
228 228  
229 -[[image:image-20220602104701-12.png||height="285" width="600"]]
230 230  
192 +[[image:image-20220912085307-2.png]]
231 231  
232 232  
233 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
234 234  
196 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
235 235  
236 -(((
237 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
238 -)))
239 239  
240 240  
241 -[[image:image-20220602103227-6.png]]
200 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
242 242  
243 243  
244 -[[image:image-20220602103357-7.png]]
203 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
245 245  
205 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
246 246  
247 247  
248 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
249 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
208 +(% style="color:red" %)**Preconditions:**
250 250  
210 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
251 251  
252 -[[image:image-20220602103844-8.png]]
212 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
253 253  
254 254  
255 255  
256 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
257 -(% style="color:blue" %)**3. Select the bin file to burn**
216 +(% style="color:blue" %)**Steps for usage:**
258 258  
218 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
259 259  
260 -[[image:image-20220602104144-9.png]]
220 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
261 261  
262 262  
263 -[[image:image-20220602104251-10.png]]
223 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
264 264  
265 265  
266 -[[image:image-20220602104402-11.png]]
267 267  
227 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
268 268  
269 269  
270 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
271 -(% style="color:blue" %)**4. Click to start the download**
230 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
272 272  
273 -[[image:image-20220602104923-13.png]]
274 274  
233 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
275 275  
276 276  
277 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
278 -(% style="color:blue" %)**5. Check update process**
236 +[[image:image-20220723100439-2.png]]
279 279  
280 280  
281 -[[image:image-20220602104948-14.png]]
282 282  
240 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
283 283  
284 284  
285 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
286 -(% style="color:blue" %)**The following picture shows that the burning is successful**
243 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
287 287  
288 -[[image:image-20220602105251-15.png]]
245 + (% style="background-color:yellow" %)**apt update**
289 289  
247 + (% style="background-color:yellow" %)**apt install minicom**
290 290  
291 291  
292 -= 3.  LA66 USB LoRaWAN Adapter =
250 +Use minicom to connect to the RPI's terminal
293 293  
252 +[[image:image-20220602153146-3.png||height="439" width="500"]]
294 294  
295 -== 3.1  Overview ==
296 296  
297 -[[image:image-20220715001142-3.png||height="145" width="220"]]
298 298  
299 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
256 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
300 300  
301 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
302 302  
303 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
259 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
304 304  
305 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
306 306  
307 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
262 +[[image:image-20220602154928-5.png||height="436" width="500"]]
308 308  
309 309  
310 -== 3.2  Features ==
311 311  
312 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
313 -* Ultra-long RF range
314 -* Support LoRaWAN v1.0.4 protocol
315 -* Support peer-to-peer protocol
316 -* TCXO crystal to ensure RF performance on low temperature
317 -* Spring RF antenna
318 -* Available in different frequency LoRaWAN frequency bands.
319 -* World-wide unique OTAA keys.
320 -* AT Command via UART-TTL interface
321 -* Firmware upgradable via UART interface
322 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
266 +(% style="color:blue" %)**4.  Send Uplink message**
323 323  
324 -== 3.3  Specification ==
325 325  
326 -* CPU: 32-bit 48 MHz
327 -* Flash: 256KB
328 -* RAM: 64KB
329 -* Input Power Range: 5v
330 -* Frequency Range: 150 MHz ~~ 960 MHz
331 -* Maximum Power +22 dBm constant RF output
332 -* High sensitivity: -148 dBm
333 -* Temperature:
334 -** Storage: -55 ~~ +125℃
335 -** Operating: -40 ~~ +85℃
336 -* Humidity:
337 -** Storage: 5 ~~ 95% (Non-Condensing)
338 -** Operating: 10 ~~ 95% (Non-Condensing)
339 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
340 -* LoRa Rx current: <9 mA
269 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
341 341  
342 -== 3.4  Pin Mapping & LED ==
271 +example: AT+SENDB=01,02,8,05820802581ea0a5
343 343  
344 344  
274 +[[image:image-20220602160339-6.png||height="517" width="600"]]
345 345  
346 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
347 347  
348 348  
349 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
278 +Check to see if TTN received the message
350 350  
351 351  
352 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
281 +[[image:image-20220602160627-7.png||height="369" width="800"]]
353 353  
354 354  
355 -[[image:image-20220602171217-1.png||height="538" width="800"]]
356 356  
285 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
357 357  
358 -Open the serial port tool
359 359  
360 -[[image:image-20220602161617-8.png]]
288 +=== 1.9.1  Hardware and Software Connection ===
361 361  
362 -[[image:image-20220602161718-9.png||height="457" width="800"]]
363 363  
364 364  
292 +==== (% style="color:blue" %)**Overview：**(%%) ====
365 365  
366 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
367 367  
368 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
295 +(((
296 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
369 369  
298 +* Send real-time location information of mobile phone to LoRaWAN network.
299 +* Check LoRaWAN network signal strengh.
300 +* Manually send messages to LoRaWAN network.
301 +)))
370 370  
371 -[[image:image-20220602161935-10.png||height="498" width="800"]]
372 372  
373 373  
374 374  
375 -(% style="color:blue" %)**3. See Uplink Command**
376 376  
377 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
307 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
378 378  
379 -example: AT+SENDB=01,02,8,05820802581ea0a5
380 380  
381 -[[image:image-20220602162157-11.png||height="497" width="800"]]
310 +A USB to Type-C adapter is needed to connect to a Mobile phone.
382 382  
312 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
383 383  
314 +[[image:image-20220813174353-2.png||height="360" width="313"]]
384 384  
385 -(% style="color:blue" %)**4. Check to see if TTN received the message**
386 386  
387 -[[image:image-20220602162331-12.png||height="420" width="800"]]
388 388  
389 389  
319 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
390 390  
391 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
392 392  
322 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
393 393  
394 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
395 395  
325 +[[image:image-20220813173738-1.png]]
396 396  
397 -(% style="color:red" %)**Preconditions:**
398 398  
399 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
400 400  
401 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
402 402  
330 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
403 403  
404 404  
405 -(% style="color:blue" %)**Steps for usage:**
333 +Function and page introduction
406 406  
407 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
408 408  
409 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
336 +[[image:image-20220723113448-7.png||height="995" width="450"]]
410 410  
411 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
412 412  
339 +**Block Explain:**
413 413  
341 +1.  Display LA66 USB LoRaWAN Module connection status
414 414  
415 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
343 +2.  Check and reconnect
416 416  
345 +3.  Turn send timestamps on or off
417 417  
418 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
347 +4.  Display LoRaWan connection status
419 419  
349 +5.  Check LoRaWan connection status
420 420  
421 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
351 +6.  The RSSI value of the node when the ACK is received
422 422  
423 -[[image:image-20220602171233-2.png||height="538" width="800"]]
353 +7.  Node's Signal Strength Icon
424 424  
355 +8.  Configure Location Uplink Interval
425 425  
357 +9.  AT command input box
426 426  
427 -(% style="color:blue" %)**2. Install Minicom in RPi.**
359 +10.  Send Button:  Send input box info to LA66 USB Adapter
428 428  
429 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
361 +11.  Output Log from LA66 USB adapter
430 430  
431 - (% style="background-color:yellow" %)**apt update**
363 +12.  clear log button
432 432  
433 - (% style="background-color:yellow" %)**apt install minicom**
365 +13.  exit button
434 434  
435 435  
436 -Use minicom to connect to the RPI's terminal
437 437  
438 -[[image:image-20220602153146-3.png||height="439" width="500"]]
369 +LA66 USB LoRaWAN Module not connected
439 439  
440 440  
372 +[[image:image-20220723110520-5.png||height="677" width="508"]]
441 441  
442 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
443 443  
444 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
445 445  
376 +Connect LA66 USB LoRaWAN Module
446 446  
447 -[[image:image-20220602154928-5.png||height="436" width="500"]]
448 448  
379 +[[image:image-20220723110626-6.png||height="681" width="511"]]
449 449  
450 450  
451 -(% style="color:blue" %)**4. Send Uplink message**
452 452  
453 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
454 454  
455 -example: AT+SENDB=01,02,8,05820802581ea0a5
384 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
456 456  
457 457  
458 -[[image:image-20220602160339-6.png||height="517" width="600"]]
387 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
459 459  
460 460  
390 +[[image:image-20220723134549-8.png]]
461 461  
462 -Check to see if TTN received the message
463 463  
464 -[[image:image-20220602160627-7.png||height="369" width="800"]]
465 465  
394 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
466 466  
467 467  
468 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
397 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
469 469  
399 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
470 470  
401 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
471 471  
472 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
403 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
473 473  
474 474  
406 +Example output in NodeRed is as below:
475 475  
408 +[[image:image-20220723144339-1.png]]
476 476  
477 -= 4.  Order Info =
478 478  
479 479  
480 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
412 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
481 481  
482 482  
415 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
416 +
417 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
418 +
419 +
420 +[[image:image-20220723150132-2.png]]
421 +
422 +
423 +
424 += 2.  FAQ =
425 +
426 +
427 +== 2.1  How to Compile Source Code for LA66? ==
428 +
429 +
430 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
431 +
432 +
433 +
434 += 3.  Order Info =
435 +
436 +
437 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
438 +
439 +
483 483  (% style="color:blue" %)**XXX**(%%): The default frequency band
484 484  
485 485  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -492,7 +492,13 @@
492 492  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
493 493  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
494 494  
495 -= 5.  Reference =
496 496  
497 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
498 498  
454 +
455 += 4.  Reference =
456 +
457 +
458 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
459 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
460 +
461 +
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0