Skip to Content
Last modified by Xiaoling on 2023/05/26 14:19
From version 166.2
edited by Xiaoling
on 2022/11/14 11:41
Change comment: There is no comment for this version
To version 78.2
edited by Edwin Chen
on 2022/07/10 21:55
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,11 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
32 +== Specification ==
68 68  
69 -
70 -== 1.3  Specification ==
71 -
72 -
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -88,357 +88,355 @@
88 88  * LoRa Rx current: <9 mA
89 89  * I/O Voltage: 3.3v
90 90  
52 +== AT Command ==
91 91  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
92 92  
93 -== 1.4  Pin Mapping & LED ==
94 94  
57 +== Dimension ==
95 95  
96 -[[image:image-20220817085048-1.png||height="533" width="734"]]
59 +[[image:image-20220517072526-1.png]]
97 97  
98 98  
62 +== Pin Mapping ==
99 99  
100 -~1. The LED lights up red when there is an upstream data packet
101 -2. When the network is successfully connected, the green light will be on for 5 seconds
102 -3. Purple light on when receiving downlink data packets
64 +[[image:image-20220523101537-1.png]]
103 103  
66 +== Land Pattern ==
104 104  
105 -[[image:image-20220820112305-1.png||height="515" width="749"]]
68 +[[image:image-20220517072821-2.png]]
106 106  
107 107  
71 +== Order Info ==
108 108  
109 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
73 +Part Number: **LA66-XXX**
110 110  
75 +**XX**: The default frequency band
111 111  
112 -**Show connection diagram：**
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
113 113  
87 += LA66 LoRaWAN Shield =
114 114  
115 -[[image:image-20220723170210-2.png||height="908" width="681"]]
89 +== Overview ==
116 116  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
117 117  
118 118  
119 -(% style="color:blue" %)**1.  open Arduino IDE**
94 +== Features ==
120 120  
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
121 121  
122 -[[image:image-20220723170545-4.png]]
107 +== Specification ==
123 123  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
124 124  
127 +== Pin Mapping & LED ==
125 125  
126 -(% style="color:blue" %)**2.  Open project**
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
127 127  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
128 128  
129 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
130 130  
131 -[[image:image-20220726135239-1.png]]
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
132 132  
137 +=== Items needed for update ===
133 133  
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
134 134  
135 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
136 -
137 -
138 -[[image:image-20220726135356-2.png]]
139 -
140 -
141 -
142 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
143 -
144 -
145 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
146 -
147 -
148 -
149 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 -
151 -
152 -(% style="color:blue" %)**1.  Open project**
153 -
154 -
155 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
156 -
157 -
158 -[[image:image-20220723172502-8.png]]
159 -
160 -
161 -
162 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
163 -
164 -
165 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
166 -
167 -
168 -
169 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
170 -
171 -
172 -(% style="color:blue" %)**1.  Open project**
173 -
174 -
175 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
176 -
177 -
178 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
179 -
180 -
181 -
182 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
183 -
184 -
185 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
186 -
187 -
188 -
189 -
190 -
191 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
192 -
193 -
194 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
195 -
196 -
197 -[[image:image-20220723175700-12.png||height="602" width="995"]]
198 -
199 -
200 -
201 -== 1.8  Example: How to join helium ==
202 -
203 -
204 -(% style="color:blue" %)**1.  Create a new device.**
205 -
206 -
207 -[[image:image-20220907165500-1.png||height="464" width="940"]]
208 -
209 -
210 -
211 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
212 -
213 -
214 -[[image:image-20220907165837-2.png||height="375" width="809"]]
215 -
216 -
217 -
218 -(% style="color:blue" %)**3.  Use AT commands.**
219 -
220 -
221 221  [[image:image-20220602100052-2.png||height="385" width="600"]]
222 222  
223 223  
146 +=== Connection ===
224 224  
225 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
226 226  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
227 227  
228 -[[image:image-20220907170308-3.png||height="556" width="617"]]
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
229 229  
157 +Connect USB TTL Adapter to PC after connecting the wires
230 230  
231 231  
232 -(% style="color:blue" %)**5.  Network successfully.**
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
233 233  
234 234  
235 -[[image:image-20220907170436-4.png]]
163 +=== Upgrade steps ===
236 236  
165 +==== Switch SW1 to put in ISP position ====
237 237  
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
238 238  
239 -(% style="color:blue" %)**6.  Send uplink using command**
240 240  
170 +==== Press the RST switch once ====
241 241  
242 -[[image:image-20220912084334-1.png]]
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
243 243  
244 244  
245 -[[image:image-20220912084412-3.png]]
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
246 246  
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
247 247  
179 +[[image:image-20220602103227-6.png]]
248 248  
249 -[[image:image-20220907170744-6.png||height="242" width="798"]]
181 +[[image:image-20220602103357-7.png]]
250 250  
251 251  
184 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 +**2. Select the COM port corresponding to USB TTL**
252 252  
253 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
187 +[[image:image-20220602103844-8.png]]
254 254  
255 255  
256 -=== 1.9.1  Items needed for update ===
190 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 +**3. Select the bin file to burn**
257 257  
193 +[[image:image-20220602104144-9.png]]
258 258  
259 -1. LA66 LoRaWAN Shield
260 -1. Arduino
261 -1. USB TO TTL Adapter
195 +[[image:image-20220602104251-10.png]]
262 262  
263 -[[image:image-20220602100052-2.png||height="385" width="600"]]
197 +[[image:image-20220602104402-11.png]]
264 264  
265 265  
200 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 +**4. Click to start the download**
266 266  
267 -=== 1.9.2  Connection ===
203 +[[image:image-20220602104923-13.png]]
268 268  
269 269  
270 -[[image:image-20220602101311-3.png||height="276" width="600"]]
206 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 +**5. Check update process**
271 271  
209 +[[image:image-20220602104948-14.png]]
272 272  
273 -(((
274 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
275 -)))
276 276  
277 -(((
278 -(% style="background-color:yellow" %)**GND  <-> GND
279 -TXD  <->  TXD
280 -RXD  <->  RXD**
281 -)))
212 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 +**The following picture shows that the burning is successful**
282 282  
215 +[[image:image-20220602105251-15.png]]
283 283  
284 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
285 285  
286 -Connect USB TTL Adapter to PC after connecting the wires
218 +== Order Info ==
287 287  
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
288 288  
289 -[[image:image-20220602102240-4.png||height="304" width="600"]]
222 +**XX**: The default frequency band
290 290  
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
291 291  
234 +== Package Info ==
292 292  
293 -=== 1.9.3  Upgrade steps ===
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
294 294  
239 += LA66 USB LoRaWAN Adapter =
295 295  
241 +== Overview ==
296 296  
297 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
298 298  
299 299  
300 -[[image:image-20220602102824-5.png||height="306" width="600"]]
246 +== Features ==
301 301  
248 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 +* Ultra-long RF range
250 +* Support LoRaWAN v1.0.4 protocol
251 +* Support peer-to-peer protocol
252 +* TCXO crystal to ensure RF performance on low temperature
253 +* Spring RF antenna
254 +* Available in different frequency LoRaWAN frequency bands.
255 +* World-wide unique OTAA keys.
256 +* AT Command via UART-TTL interface
257 +* Firmware upgradable via UART interface
302 302  
259 +== Specification ==
303 303  
261 +* CPU: 32-bit 48 MHz
262 +* Flash: 256KB
263 +* RAM: 64KB
264 +* Input Power Range: 5v
265 +* Frequency Range: 150 MHz ~~ 960 MHz
266 +* Maximum Power +22 dBm constant RF output
267 +* High sensitivity: -148 dBm
268 +* Temperature:
269 +** Storage: -55 ~~ +125℃
270 +** Operating: -40 ~~ +85℃
271 +* Humidity:
272 +** Storage: 5 ~~ 95% (Non-Condensing)
273 +** Operating: 10 ~~ 95% (Non-Condensing)
274 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 +* LoRa Rx current: <9 mA
304 304  
305 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
277 +== Pin Mapping & LED ==
306 306  
279 +== Example Send & Get Messages via LoRaWAN in PC ==
307 307  
308 -[[image:image-20220817085447-1.png]]
281 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
309 309  
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
310 310  
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
311 311  
287 +Open the serial port tool
312 312  
313 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
289 +[[image:image-20220602161617-8.png]]
314 314  
291 +[[image:image-20220602161718-9.png||height="457" width="800"]]
315 315  
316 316  
317 -(((
318 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
319 -)))
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
320 320  
296 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
321 321  
322 -[[image:image-20220602103227-6.png]]
298 +[[image:image-20220602161935-10.png||height="498" width="800"]]
323 323  
324 324  
325 -[[image:image-20220602103357-7.png]]
301 +3. See Uplink Command
326 326  
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
327 327  
305 +example: AT+SENDB=01,02,8,05820802581ea0a5
328 328  
329 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
330 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
307 +[[image:image-20220602162157-11.png||height="497" width="800"]]
331 331  
332 332  
333 -[[image:image-20220602103844-8.png]]
310 +4. Check to see if TTN received the message
334 334  
312 +[[image:image-20220602162331-12.png||height="420" width="800"]]
335 335  
336 336  
337 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
338 -(% style="color:blue" %)**3.  Select the bin file to burn**
339 339  
316 +== Example Send & Get Messages via LoRaWAN in RPi ==
340 340  
341 -[[image:image-20220602104144-9.png]]
318 +Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
342 342  
320 +[[image:image-20220602171233-2.png||height="538" width="800"]]
343 343  
344 -[[image:image-20220602104251-10.png]]
322 +Log in to the RPI's terminal and connect to the serial port
345 345  
324 +[[image:image-20220602153146-3.png]]
346 346  
347 -[[image:image-20220602104402-11.png]]
326 +Press the reset switch RST on the LA66 LoRa Shield.
327 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
348 348  
329 +[[image:image-20220602154928-5.png]]
349 349  
331 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
350 350  
351 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
352 -(% style="color:blue" %)**4.  Click to start the download**
333 +example: AT+SENDB=01,02,8,05820802581ea0a5
353 353  
335 +[[image:image-20220602160339-6.png]]
354 354  
355 -[[image:image-20220602104923-13.png]]
337 +Check to see if TTN received the message
356 356  
339 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
357 357  
341 +=== Install Minicom ===
358 358  
359 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
360 -(% style="color:blue" %)**5.  Check update process**
343 +Enter the following command in the RPI terminal
361 361  
345 +apt update
362 362  
363 -[[image:image-20220602104948-14.png]]
347 +[[image:image-20220602143155-1.png]]
364 364  
349 +apt install minicom
365 365  
351 +[[image:image-20220602143744-2.png]]
366 366  
367 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
368 -(% style="color:blue" %)**The following picture shows that the burning is successful**
353 +=== Send PC's CPU/RAM usage to TTN via script. ===
369 369  
355 +==== Take python as an example： ====
370 370  
371 -[[image:image-20220602105251-15.png]]
357 +===== Preconditions: =====
372 372  
359 +1.LA66 USB LoRaWAN Adapter works fine
373 373  
361 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
374 374  
375 -= 2.  FAQ =
363 +===== Steps for usage =====
376 376  
365 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
377 377  
378 -== 2.1  How to Compile Source Code for LA66? ==
367 +2.Run the script and see the TTN
379 379  
369 +[[image:image-20220602115852-3.png]]
380 380  
381 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
382 382  
383 383  
373 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
384 384  
385 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
386 386  
376 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
387 387  
388 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
389 389  
390 390  
380 +== Order Info ==
391 391  
392 -= 3.  Order Info =
382 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
393 393  
384 +**XX**: The default frequency band
394 394  
395 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
386 +* **AS923**: LoRaWAN AS923 band
387 +* **AU915**: LoRaWAN AU915 band
388 +* **EU433**: LoRaWAN EU433 band
389 +* **EU868**: LoRaWAN EU868 band
390 +* **KR920**: LoRaWAN KR920 band
391 +* **US915**: LoRaWAN US915 band
392 +* **IN865**: LoRaWAN IN865 band
393 +* **CN470**: LoRaWAN CN470 band
394 +* **PP**: Peer to Peer LoRa Protocol
396 396  
396 +== Package Info ==
397 397  
398 -(% style="color:blue" %)**XXX**(%%): The default frequency band
398 +* LA66 USB LoRaWAN Adapter x 1
399 399  
400 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
401 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
402 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
403 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
404 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
405 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
406 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
407 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
408 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
400 += Reference =
409 409  
402 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
410 410  
411 -
412 -= 4.  Reference =
413 -
414 -
415 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
416 -
417 -
418 -
419 -= 5.  FCC Statement =
420 -
421 -
422 -(% style="color:red" %)**FCC Caution:**
423 -
424 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
425 -
426 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
427 -
428 -
429 -(% style="color:red" %)**IMPORTANT NOTE: **
430 -
431 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
432 -
433 -—Reorient or relocate the receiving antenna.
434 -
435 -—Increase the separation between the equipment and receiver.
436 -
437 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
438 -
439 -—Consult the dealer or an experienced radio/TV technician for help.
440 -
441 -
442 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
443 -
444 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content