Skip to Content
Last modified by Xiaoling on 2023/09/19 09:20
From version 98.2
edited by Xiaoling
on 2022/07/18 09:56
Change comment: There is no comment for this version
To version 162.3
edited by Xiaoling
on 2023/06/05 15:35
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Module User Manual
Content
... ... @@ -8,21 +8,31 @@
8 8  
9 9  = 1.  LA66 LoRaWAN Module =
10 10  
11 -
12 12  == 1.1  What is LA66 LoRaWAN Module ==
13 13  
14 14  
15 15  (((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
15 +(((
16 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
17 +)))
17 17  
19 +(((
20 +
21 +)))
22 +
23 +(((
18 18  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
19 19  )))
26 +)))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
32 +)))
24 24  
25 25  (((
35 +(((
26 26  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
27 27  )))
28 28  
... ... @@ -29,15 +29,19 @@
29 29  (((
30 30  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
31 31  )))
42 +)))
32 32  
33 33  (((
45 +(((
34 34  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
35 35  )))
48 +)))
36 36  
37 37  
38 38  == 1.2  Features ==
39 39  
40 -* Support LoRaWAN v1.0.4 protocol
53 +
54 +* Support LoRaWAN v1.0.3 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 43  * SMD Antenna pad and i-pex antenna connector
... ... @@ -47,8 +47,11 @@
47 47  * Firmware upgradable via UART interface
48 48  * Ultra-long RF range
49 49  
64 +
65 +
50 50  == 1.3  Specification ==
51 51  
68 +
52 52  * CPU: 32-bit 48 MHz
53 53  * Flash: 256KB
54 54  * RAM: 64KB
... ... @@ -69,428 +69,177 @@
69 69  
70 70  
71 71  
72 -
73 73  == 1.4  AT Command ==
74 74  
75 75  
76 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
92 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in[[ AT Command documents>>https://www.dropbox.com/sh/wtq43za8sykpgta/AABAEE02uEAsRU-JV7bzEhMba?dl=0]].
77 77  
78 78  
79 79  == 1.5  Dimension ==
80 80  
97 +
81 81  [[image:image-20220718094750-3.png]]
82 82  
83 83  
84 -
85 -
86 86  == 1.6  Pin Mapping ==
87 87  
103 +[[image:image-20220720111850-1.png]]
88 88  
89 -[[image:image-20220523101537-1.png]]
90 90  
91 -
92 -
93 93  == 1.7  Land Pattern ==
94 94  
108 +
95 95  [[image:image-20220517072821-2.png]]
96 96  
97 97  
112 += 2.  FAQ =
98 98  
99 -= 2.  LA66 LoRaWAN Shield =
114 +== 2.1  Where to find examples of how to use LA66? ==
100 100  
101 101  
102 -== 2.1  Overview ==
117 +(% class="wikigeneratedid" %)
118 +Below products are made by LA66. User can use their examples as reference:
103 103  
120 +* [[LA66 Shield for Arduino>>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.WebHome]]
121 +* [[LA66 USB Adapter>>doc:Main.User Manual for LoRaWAN End Nodes.LA66 USB LoRaWAN Adapter User Manual.WebHome]]
104 104  
105 -[[image:image-20220715000826-2.png||height="386" width="449"]]
106 106  
107 107  
108 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
125 +== 2.2  How to Compile Source Code for LA66? ==
109 109  
110 -(((
111 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
112 -)))
113 113  
114 -(((
115 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
116 -)))
128 +Compile and Upload Code to ASR6601 Platform：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
117 117  
118 -(((
119 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
120 -)))
121 121  
122 -(((
123 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
124 -)))
131 +== 2.3  Can i use LA66 module's internal I/O without external MCU, So to save product cost? ==
125 125  
126 126  
127 -== 2.2  Features ==
134 +Yes, this is possible, user can refer[[ the source code from ASR >>https://github.com/asrlora/asr_lora_6601/tree/master/projects/ASR6601SE-EVAL/examples/lora]]to get examples for how to its I/O Interfaces.
128 128  
129 -* Arduino Shield base on LA66 LoRaWAN module
130 -* Support LoRaWAN v1.0.4 protocol
131 -* Support peer-to-peer protocol
132 -* TCXO crystal to ensure RF performance on low temperature
133 -* SMA connector
134 -* Available in different frequency LoRaWAN frequency bands.
135 -* World-wide unique OTAA keys.
136 -* AT Command via UART-TTL interface
137 -* Firmware upgradable via UART interface
138 -* Ultra-long RF range
139 139  
140 -== 2.3  Specification ==
137 +== 2.4  Where to find Peer-to-Peer firmware of LA66? ==
141 141  
142 -* CPU: 32-bit 48 MHz
143 -* Flash: 256KB
144 -* RAM: 64KB
145 -* Input Power Range: 1.8v ~~ 3.7v
146 -* Power Consumption: < 4uA.
147 -* Frequency Range: 150 MHz ~~ 960 MHz
148 -* Maximum Power +22 dBm constant RF output
149 -* High sensitivity: -148 dBm
150 -* Temperature:
151 -** Storage: -55 ~~ +125℃
152 -** Operating: -40 ~~ +85℃
153 -* Humidity:
154 -** Storage: 5 ~~ 95% (Non-Condensing)
155 -** Operating: 10 ~~ 95% (Non-Condensing)
156 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
157 -* LoRa Rx current: <9 mA
158 -* I/O Voltage: 3.3v
159 159  
160 -== 2.4  Pin Mapping & LED ==
140 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
161 161  
162 162  
143 +== 2.5 How can i use J-LInk to debug LA66? ==
163 163  
164 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
165 165  
146 +(% style="color:#037691" %)**The steps are as follows:**
166 166  
167 167  
168 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
149 +(% style="color:blue" %)**1. Install J-Link software from**
169 169  
151 +[[https:~~/~~/www.segger.com/downloads/jlink/>>url:https://www.segger.com/downloads/jlink/]]
170 170  
171 171  
172 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
154 +(% style="color:blue" %)**2. Expose PA6 / PA7 / RSTN of LA66.**
173 173  
174 174  
157 +[[image:image-20230605151850-1.png]]
175 175  
176 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
177 177  
160 +[[image:image-20230605151850-2.png]]
178 178  
179 -=== 2.8.1  Items needed for update ===
180 180  
181 -1. LA66 LoRaWAN Shield
182 -1. Arduino
183 -1. USB TO TTL Adapter
163 +(% style="color:blue" %)**3. Connect JLINK, and switch mother board SW1 to ISP. Wire connection as below:**
184 184  
185 -[[image:image-20220602100052-2.png||height="385" width="600"]]
165 +**LA66 PA6 < ~-~- > JLINK SWDIO (Pin 7)**
186 186  
167 +**LA66 PA7 < ~-~- > JLINK SWCLK (Pin 9)**
187 187  
188 -=== 2.8.2  Connection ===
169 +**LA66 RSTN < ~-~- > JLINK RESET (Pin 15)**
189 189  
171 +**LA66 GND  < ~-~- > JLINK GND (Pin 8)**
190 190  
191 -[[image:image-20220602101311-3.png||height="276" width="600"]]
173 +[[image:image-20230605151850-3.png||height="629" width="1182"]]
192 192  
175 +(% style="display:none" %) (%%)
193 193  
194 -(((
195 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
196 -)))
177 +(% style="color:blue" %)**4. Copy \SN50v3\tools\FLM\ASR6601.FLM to \Keil\ARM\ Flash\**
197 197  
198 -(((
199 -(% style="background-color:yellow" %)**GND  <-> GND
200 -TXD  <->  TXD
201 -RXD  <->  RXD**
202 -)))
179 +(% style="display:none" %) [[image:image-20230605151850-4.png]]
203 203  
204 204  
205 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
182 +**Add ASR6601 256KB Flash to Flash Download**
206 206  
207 -Connect USB TTL Adapter to PC after connecting the wires
184 +[[image:image-20230605152412-12.png]]
208 208  
209 209  
210 -[[image:image-20220602102240-4.png||height="304" width="600"]]
187 +[[image:image-20230605151851-6.png]]
211 211  
212 212  
213 -=== 2.8.3  Upgrade steps ===
190 +(% style="color:blue" %)**5. Modify \SN50v3\Projects\Applications\DRAGINO-LRWAN-AT\cfg\gcc.ld, to 0x08000000.**
214 214  
215 215  
216 -==== 1.  Switch SW1 to put in ISP position ====
193 +[[image:image-20230605151851-7.png]]
217 217  
195 +[[image:image-20230605151851-8.png]]
218 218  
219 -[[image:image-20220602102824-5.png||height="306" width="600"]]
220 220  
198 +(% style="color:red" %)**Note: After debug, user should change the Flash address back to 0x0800D000, and upload the OTA bootloader to LA66. Otherwise, the compiled program doesn't support OTA update.**
221 221  
222 222  
223 -==== 2.  Press the RST switch once ====
201 +(% style="color:blue" %)**6. Comment the low power function in main.c.**
224 224  
225 225  
226 -[[image:image-20220602104701-12.png||height="285" width="600"]]
204 +[[image:image-20230605151851-9.png]]
227 227  
228 228  
207 +(% style="color:blue" %)**Click Debug mode to debug.**
229 229  
230 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
209 +[[image:image-20230605151851-10.png||height="293" width="1275"]]
231 231  
232 232  
233 -(((
234 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
235 -)))
212 +[[image:image-20230605151851-11.png||height="739" width="1275"]](% style="display:none" %)
236 236  
214 +(% style="display:none" %) (%%)
237 237  
238 -[[image:image-20220602103227-6.png]]
216 += 3.  Order Info =
239 239  
240 240  
241 -[[image:image-20220602103357-7.png]]
219 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**
242 242  
221 +(% style="color:blue" %)**XXX**(%%): The default frequency band
243 243  
223 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
224 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
225 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
226 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
227 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
228 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
229 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
230 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
231 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
244 244  
245 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
246 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
247 247  
248 248  
249 -[[image:image-20220602103844-8.png]]
235 += 4.  FCC Statement =
250 250  
251 251  
238 +(% style="color:red" %)**FCC Caution:**
252 252  
253 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
254 -(% style="color:blue" %)**3. Select the bin file to burn**
240 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
255 255  
242 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
256 256  
257 -[[image:image-20220602104144-9.png]]
258 258  
245 +(% style="color:red" %)**IMPORTANT NOTE: **
259 259  
260 -[[image:image-20220602104251-10.png]]
247 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
261 261  
249 +—Reorient or relocate the receiving antenna.
262 262  
263 -[[image:image-20220602104402-11.png]]
251 +—Increase the separation between the equipment and receiver.
264 264  
253 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
265 265  
255 +—Consult the dealer or an experienced radio/TV technician for help.
266 266  
267 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
268 -(% style="color:blue" %)**4. Click to start the download**
269 269  
270 -[[image:image-20220602104923-13.png]]
258 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
271 271  
260 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
272 272  
273 -
274 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
275 -(% style="color:blue" %)**5. Check update process**
276 -
277 -
278 -[[image:image-20220602104948-14.png]]
279 -
280 -
281 -
282 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
283 -(% style="color:blue" %)**The following picture shows that the burning is successful**
284 -
285 -[[image:image-20220602105251-15.png]]
286 -
287 -
288 -
289 -= 3.  LA66 USB LoRaWAN Adapter =
290 -
291 -
292 -== 3.1  Overview ==
293 -
294 -[[image:image-20220715001142-3.png||height="145" width="220"]]
295 -
296 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
297 -
298 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
299 -
300 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
301 -
302 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
303 -
304 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
305 -
306 -
307 -== 3.2  Features ==
308 -
309 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
310 -* Ultra-long RF range
311 -* Support LoRaWAN v1.0.4 protocol
312 -* Support peer-to-peer protocol
313 -* TCXO crystal to ensure RF performance on low temperature
314 -* Spring RF antenna
315 -* Available in different frequency LoRaWAN frequency bands.
316 -* World-wide unique OTAA keys.
317 -* AT Command via UART-TTL interface
318 -* Firmware upgradable via UART interface
319 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
320 -
321 -== 3.3  Specification ==
322 -
323 -* CPU: 32-bit 48 MHz
324 -* Flash: 256KB
325 -* RAM: 64KB
326 -* Input Power Range: 5v
327 -* Frequency Range: 150 MHz ~~ 960 MHz
328 -* Maximum Power +22 dBm constant RF output
329 -* High sensitivity: -148 dBm
330 -* Temperature:
331 -** Storage: -55 ~~ +125℃
332 -** Operating: -40 ~~ +85℃
333 -* Humidity:
334 -** Storage: 5 ~~ 95% (Non-Condensing)
335 -** Operating: 10 ~~ 95% (Non-Condensing)
336 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
337 -* LoRa Rx current: <9 mA
338 -
339 -== 3.4  Pin Mapping & LED ==
340 -
341 -
342 -
343 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
344 -
345 -
346 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
347 -
348 -
349 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
350 -
351 -
352 -[[image:image-20220602171217-1.png||height="538" width="800"]]
353 -
354 -
355 -Open the serial port tool
356 -
357 -[[image:image-20220602161617-8.png]]
358 -
359 -[[image:image-20220602161718-9.png||height="457" width="800"]]
360 -
361 -
362 -
363 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
364 -
365 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
366 -
367 -
368 -[[image:image-20220602161935-10.png||height="498" width="800"]]
369 -
370 -
371 -
372 -(% style="color:blue" %)**3. See Uplink Command**
373 -
374 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
375 -
376 -example: AT+SENDB=01,02,8,05820802581ea0a5
377 -
378 -[[image:image-20220602162157-11.png||height="497" width="800"]]
379 -
380 -
381 -
382 -(% style="color:blue" %)**4. Check to see if TTN received the message**
383 -
384 -[[image:image-20220602162331-12.png||height="420" width="800"]]
385 -
386 -
387 -
388 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
389 -
390 -
391 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
392 -
393 -
394 -(% style="color:red" %)**Preconditions:**
395 -
396 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
397 -
398 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
399 -
400 -
401 -
402 -(% style="color:blue" %)**Steps for usage:**
403 -
404 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
405 -
406 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
407 -
408 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
409 -
410 -
411 -
412 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
413 -
414 -
415 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
416 -
417 -
418 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
419 -
420 -[[image:image-20220602171233-2.png||height="538" width="800"]]
421 -
422 -
423 -
424 -(% style="color:blue" %)**2. Install Minicom in RPi.**
425 -
426 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
427 -
428 - (% style="background-color:yellow" %)**apt update**
429 -
430 - (% style="background-color:yellow" %)**apt install minicom**
431 -
432 -
433 -Use minicom to connect to the RPI's terminal
434 -
435 -[[image:image-20220602153146-3.png||height="439" width="500"]]
436 -
437 -
438 -
439 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
440 -
441 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
442 -
443 -
444 -[[image:image-20220602154928-5.png||height="436" width="500"]]
445 -
446 -
447 -
448 -(% style="color:blue" %)**4. Send Uplink message**
449 -
450 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
451 -
452 -example: AT+SENDB=01,02,8,05820802581ea0a5
453 -
454 -
455 -[[image:image-20220602160339-6.png||height="517" width="600"]]
456 -
457 -
458 -
459 -Check to see if TTN received the message
460 -
461 -[[image:image-20220602160627-7.png||height="369" width="800"]]
462 -
463 -
464 -
465 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
466 -
467 -
468 -
469 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
470 -
471 -
472 -
473 -
474 -= 4.  Order Info =
475 -
476 -
477 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
478 -
479 -
480 -(% style="color:blue" %)**XXX**(%%): The default frequency band
481 -
482 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
483 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
484 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
485 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
486 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
487 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
488 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
489 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
490 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
491 -
492 -= 5.  Reference =
493 -
494 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
495 -
496 496  
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20230605151850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +532.8 KB
Content
image-20230605151850-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +534.2 KB
Content
image-20230605151850-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230605151850-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +42.7 KB
Content
image-20230605151851-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
image-20230605151851-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.3 KB
Content
image-20230605151851-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +67.2 KB
Content
image-20230605151851-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.3 KB
Content
image-20230605151851-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +26.3 KB
Content
image-20230605151851-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.9 KB
Content
image-20230605151851-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
image-20230605152412-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.2 KB
Content