Skip to Content
Last modified by Xiaoling on 2023/09/19 09:20
From version 79.1
edited by Edwin Chen
on 2022/07/10 22:00
Change comment: There is no comment for this version
To version 162.5
edited by Xiaoling
on 2023/09/18 16:35
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Module User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,103 +1,60 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
2 -{{toc/}}
3 -{{/box}}
1 +
4 4  
5 -= LA66 LoRaWAN Module =
3 +**Table of Contents:**
6 6  
7 -== What is LA66 LoRaWAN Module ==
5 +{{toc/}}
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
12 12  
13 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
9 += 1.  LA66 LoRaWAN Module =
14 14  
15 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
11 +== 1.1  What is LA66 LoRaWAN Module ==
16 16  
17 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
18 18  
14 +(((
15 +(((
16 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
17 +)))
19 19  
20 -== Features ==
19 +(((
20 +
21 +)))
21 21  
22 -* Support LoRaWAN v1.0.4 protocol
23 -* Support peer-to-peer protocol
24 -* TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
26 -* Available in different frequency LoRaWAN frequency bands.
27 -* World-wide unique OTAA keys.
28 -* AT Command via UART-TTL interface
29 -* Firmware upgradable via UART interface
30 -* Ultra-long RF range
23 +(((
24 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
25 +)))
26 +)))
31 31  
32 -== Specification ==
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 33  
34 -* CPU: 32-bit 48 MHz
35 -* Flash: 256KB
36 -* RAM: 64KB
37 -* Input Power Range: 1.8v ~~ 3.7v
38 -* Power Consumption: < 4uA.
39 -* Frequency Range: 150 MHz ~~ 960 MHz
40 -* Maximum Power +22 dBm constant RF output
41 -* High sensitivity: -148 dBm
42 -* Temperature:
43 -** Storage: -55 ~~ +125℃
44 -** Operating: -40 ~~ +85℃
45 -* Humidity:
46 -** Storage: 5 ~~ 95% (Non-Condensing)
47 -** Operating: 10 ~~ 95% (Non-Condensing)
48 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
49 -* LoRa Rx current: <9 mA
50 -* I/O Voltage: 3.3v
34 +(((
35 +(((
36 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
51 51  
52 -== AT Command ==
39 +(((
40 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
41 +)))
42 +)))
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
44 +(((
45 +(((
46 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
47 +)))
48 +)))
55 55  
56 56  
57 -== Dimension ==
51 +== 1.2  Features ==
58 58  
59 -[[image:image-20220517072526-1.png]]
60 60  
61 -
62 -== Pin Mapping ==
63 -
64 -[[image:image-20220523101537-1.png]]
65 -
66 -== Land Pattern ==
67 -
68 -[[image:image-20220517072821-2.png]]
69 -
70 -
71 -== Order Info ==
72 -
73 -Part Number: **LA66-XXX**
74 -
75 -**XX**: The default frequency band
76 -
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
86 -
87 -= LA66 LoRaWAN Shield =
88 -
89 -== Overview ==
90 -
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 -
93 -
94 -== Features ==
95 -
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
54 +* Support LoRaWAN v1.0.3 protocol
98 98  * Support peer-to-peer protocol
99 99  * TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
57 +* SMD Antenna pad and i-pex antenna connector
101 101  * Available in different frequency LoRaWAN frequency bands.
102 102  * World-wide unique OTAA keys.
103 103  * AT Command via UART-TTL interface
... ... @@ -104,8 +104,10 @@
104 104  * Firmware upgradable via UART interface
105 105  * Ultra-long RF range
106 106  
107 -== Specification ==
108 108  
65 +== 1.3  Specification ==
66 +
67 +
109 109  * CPU: 32-bit 48 MHz
110 110  * Flash: 256KB
111 111  * RAM: 64KB
... ... @@ -124,287 +124,177 @@
124 124  * LoRa Rx current: <9 mA
125 125  * I/O Voltage: 3.3v
126 126  
127 -== Pin Mapping & LED ==
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
87 +== 1.4  AT Command ==
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in[[ AT Command documents>>https://www.dropbox.com/scl/fi/s3i58dyuh2zpwxfzcks9d/Accuhealth-LA66-AT-commands.pdf?rlkey=059co9isdbddl1h1lb5gy93oy&dl=0]].
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
92 +== 1.5  Dimension ==
136 136  
137 -=== Items needed for update ===
138 138  
139 -1. LA66 LoRaWAN Shield
140 -1. Arduino
141 -1. USB TO TTL Adapter
95 +[[image:image-20220718094750-3.png]]
142 142  
143 -[[image:image-20220602100052-2.png||height="385" width="600"]]
144 144  
98 +== 1.6  Pin Mapping ==
145 145  
146 -=== Connection ===
100 +[[image:image-20220720111850-1.png]]
147 147  
148 -[[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
103 +== 1.7  Land Pattern ==
154 154  
155 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
156 156  
157 -Connect USB TTL Adapter to PC after connecting the wires
106 +[[image:image-20220517072821-2.png]]
158 158  
159 159  
160 -[[image:image-20220602102240-4.png||height="304" width="600"]]
109 += 2.  FAQ =
161 161  
111 +== 2.1  Where to find examples of how to use LA66? ==
162 162  
163 -=== Upgrade steps ===
164 164  
165 -==== Switch SW1 to put in ISP position ====
114 +(% class="wikigeneratedid" %)
115 +Below products are made by LA66. User can use their examples as reference:
166 166  
167 -[[image:image-20220602102824-5.png||height="306" width="600"]]
117 +* [[LA66 Shield for Arduino>>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.WebHome]]
118 +* [[LA66 USB Adapter>>doc:Main.User Manual for LoRaWAN End Nodes.LA66 USB LoRaWAN Adapter User Manual.WebHome]]
168 168  
169 169  
170 -==== Press the RST switch once ====
121 +== 2.2  How to Compile Source Code for LA66? ==
171 171  
172 -[[image:image-20220602104701-12.png||height="285" width="600"]]
173 173  
124 +Compile and Upload Code to ASR6601 Platform：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
176 176  
177 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
127 +== 2.3  Can i use LA66 module's internal I/O without external MCU, So to save product cost? ==
178 178  
179 -[[image:image-20220602103227-6.png]]
180 180  
181 -[[image:image-20220602103357-7.png]]
130 +Yes, this is possible, user can refer[[ the source code from ASR >>https://github.com/asrlora/asr_lora_6601/tree/master/projects/ASR6601SE-EVAL/examples/lora]]to get examples for how to its I/O Interfaces.
182 182  
183 183  
184 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 -**2. Select the COM port corresponding to USB TTL**
133 +== 2.4  Where to find Peer-to-Peer firmware of LA66? ==
186 186  
187 -[[image:image-20220602103844-8.png]]
188 188  
136 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
189 189  
190 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 -**3. Select the bin file to burn**
192 192  
193 -[[image:image-20220602104144-9.png]]
139 +== 2.5 How can i use J-LInk to debug LA66? ==
194 194  
195 -[[image:image-20220602104251-10.png]]
196 196  
197 -[[image:image-20220602104402-11.png]]
142 +(% style="color:#037691" %)**The steps are as follows:**
198 198  
199 199  
200 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 -**4. Click to start the download**
145 +(% style="color:blue" %)**1. Install J-Link software from**
202 202  
203 -[[image:image-20220602104923-13.png]]
147 +[[https:~~/~~/www.segger.com/downloads/jlink/>>url:https://www.segger.com/downloads/jlink/]]
204 204  
205 205  
206 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 -**5. Check update process**
150 +(% style="color:blue" %)**2. Expose PA6 / PA7 / RSTN of LA66.**
208 208  
209 -[[image:image-20220602104948-14.png]]
210 210  
153 +[[image:image-20230605151850-1.png||height="676" width="640"]]
211 211  
212 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 -**The following picture shows that the burning is successful**
214 214  
215 -[[image:image-20220602105251-15.png]]
156 +[[image:image-20230605151850-2.png]]
216 216  
158 +(% style="display:none" %) (%%)
217 217  
218 -== Order Info ==
160 +(% style="color:blue" %)**3. Connect JLINK, and switch mother board SW1 to ISP. Wire connection as below:**
219 219  
220 -Part Number: **LA66-LoRaWAN-Shield-XXX**
221 221  
222 -**XX**: The default frequency band
163 +**LA66 PA6 < ~-~- > JLINK SWDIO (Pin 7)**
223 223  
224 -* **AS923**: LoRaWAN AS923 band
225 -* **AU915**: LoRaWAN AU915 band
226 -* **EU433**: LoRaWAN EU433 band
227 -* **EU868**: LoRaWAN EU868 band
228 -* **KR920**: LoRaWAN KR920 band
229 -* **US915**: LoRaWAN US915 band
230 -* **IN865**: LoRaWAN IN865 band
231 -* **CN470**: LoRaWAN CN470 band
232 -* **PP**: Peer to Peer LoRa Protocol
165 +**LA66 PA7 < ~-~- > JLINK SWCLK (Pin 9)**
233 233  
234 -== Package Info ==
167 +**LA66 RSTN < ~-~- > JLINK RESET (Pin 15)**
235 235  
236 -* LA66 LoRaWAN Shield x 1
237 -* RF Antenna x 1
169 +**LA66 GND  < ~-~- > JLINK GND (Pin 8)**
238 238  
239 -= LA66 USB LoRaWAN Adapter =
171 +[[image:image-20230605151850-3.png||height="629" width="1182"]]
240 240  
241 -== Overview ==
173 +(% style="display:none" %) (%%)
242 242  
243 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
175 +(% style="color:blue" %)**4. Copy \SN50v3\tools\FLM\ASR6601.FLM to \Keil\ARM\ Flash\**
244 244  
177 +(% style="display:none" %) [[image:image-20230605151850-4.png]]
245 245  
246 -== Features ==
247 247  
248 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 -* Ultra-long RF range
250 -* Support LoRaWAN v1.0.4 protocol
251 -* Support peer-to-peer protocol
252 -* TCXO crystal to ensure RF performance on low temperature
253 -* Spring RF antenna
254 -* Available in different frequency LoRaWAN frequency bands.
255 -* World-wide unique OTAA keys.
256 -* AT Command via UART-TTL interface
257 -* Firmware upgradable via UART interface
180 +**Add ASR6601 256KB Flash to Flash Download**
258 258  
259 -== Specification ==
182 +[[image:image-20230605152412-12.png]]
260 260  
261 -* CPU: 32-bit 48 MHz
262 -* Flash: 256KB
263 -* RAM: 64KB
264 -* Input Power Range: 5v
265 -* Frequency Range: 150 MHz ~~ 960 MHz
266 -* Maximum Power +22 dBm constant RF output
267 -* High sensitivity: -148 dBm
268 -* Temperature:
269 -** Storage: -55 ~~ +125℃
270 -** Operating: -40 ~~ +85℃
271 -* Humidity:
272 -** Storage: 5 ~~ 95% (Non-Condensing)
273 -** Operating: 10 ~~ 95% (Non-Condensing)
274 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 -* LoRa Rx current: <9 mA
276 276  
277 -== Pin Mapping & LED ==
185 +[[image:image-20230605151851-6.png]]
278 278  
279 -== Example Send & Get Messages via LoRaWAN in PC ==
280 280  
281 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
188 +(% style="color:blue" %)**5. Modify \SN50v3\Projects\Applications\DRAGINO-LRWAN-AT\cfg\gcc.ld, to 0x08000000.**
282 282  
283 -~1. Connect the LA66 USB LoRaWAN adapter to PC
284 284  
285 -[[image:image-20220602171217-1.png||height="538" width="800"]]
191 +[[image:image-20230605151851-7.png]]
286 286  
287 -Open the serial port tool
193 +[[image:image-20230605151851-8.png]]
288 288  
289 -[[image:image-20220602161617-8.png]]
290 290  
291 -[[image:image-20220602161718-9.png||height="457" width="800"]]
196 +(% style="color:red" %)**Note: After debug, user should change the Flash address back to 0x0800D000, and upload the OTA bootloader to LA66. Otherwise, the compiled program doesn't support OTA update.**
292 292  
293 293  
294 -2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
199 +(% style="color:blue" %)**6. Comment the low power function in main.c.**
295 295  
296 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
297 297  
298 -[[image:image-20220602161935-10.png||height="498" width="800"]]
202 +[[image:image-20230605151851-9.png]]
299 299  
300 300  
301 -3. See Uplink Command
205 +(% style="color:blue" %)**Click Debug mode to debug.**
302 302  
303 -Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
207 +[[image:image-20230605151851-10.png||height="293" width="1275"]]
304 304  
305 -example: AT+SENDB=01,02,8,05820802581ea0a5
306 306  
307 -[[image:image-20220602162157-11.png||height="497" width="800"]]
210 +[[image:image-20230605151851-11.png||height="739" width="1275"]](% style="display:none" %)
308 308  
212 +(% style="display:none" %) (%%)
309 309  
310 -4. Check to see if TTN received the message
214 += 3.  Order Info =
311 311  
312 -[[image:image-20220602162331-12.png||height="420" width="800"]]
313 313  
217 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**
314 314  
219 +(% style="color:blue" %)**XXX**(%%): The default frequency band
315 315  
316 -== Example Send & Get Messages via LoRaWAN in RPi ==
221 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
222 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
223 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
224 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
225 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
226 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
227 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
228 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
229 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
317 317  
318 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
319 319  
320 -~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
232 += 4.  FCC Statement =
321 321  
322 -[[image:image-20220602171233-2.png||height="538" width="800"]]
323 323  
235 +(% style="color:red" %)**FCC Caution:**
324 324  
325 -2. Install Minicom in RPi.
237 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
326 326  
327 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
239 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
328 328  
329 -(% class="mark" %)apt update
330 330  
331 -(% class="mark" %)apt install minicom
242 +(% style="color:red" %)**IMPORTANT NOTE: **
332 332  
244 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
333 333  
334 -Use minicom to connect to the RPI's terminal
246 +—Reorient or relocate the receiving antenna.
335 335  
336 -[[image:image-20220602153146-3.png||height="439" width="500"]]
248 +—Increase the separation between the equipment and receiver.
337 337  
250 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
338 338  
339 -3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
340 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
252 +—Consult the dealer or an experienced radio/TV technician for help.
341 341  
342 -[[image:image-20220602154928-5.png||height="436" width="500"]]
343 343  
255 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
344 344  
345 -4. Send Uplink message
257 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
346 346  
347 -Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
348 -
349 -example: AT+SENDB=01,02,8,05820802581ea0a5
350 -
351 -[[image:image-20220602160339-6.png||height="517" width="600"]]
352 -
353 -Check to see if TTN received the message
354 -
355 -[[image:image-20220602160627-7.png||height="369" width="800"]]
356 -
357 -
358 -
359 -=== Send PC's CPU/RAM usage to TTN via script. ===
360 -
361 -==== Take python as an example： ====
362 -
363 -===== Preconditions: =====
364 -
365 -1.LA66 USB LoRaWAN Adapter works fine
366 -
367 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
368 -
369 -===== Steps for usage =====
370 -
371 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
372 -
373 -2.Run the script and see the TTN
374 -
375 -[[image:image-20220602115852-3.png]]
376 -
377 -
378 -
379 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
380 -
381 -
382 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
383 -
384 -
385 -
386 -== Order Info ==
387 -
388 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
389 -
390 -**XX**: The default frequency band
391 -
392 -* **AS923**: LoRaWAN AS923 band
393 -* **AU915**: LoRaWAN AU915 band
394 -* **EU433**: LoRaWAN EU433 band
395 -* **EU868**: LoRaWAN EU868 band
396 -* **KR920**: LoRaWAN KR920 band
397 -* **US915**: LoRaWAN US915 band
398 -* **IN865**: LoRaWAN IN865 band
399 -* **CN470**: LoRaWAN CN470 band
400 -* **PP**: Peer to Peer LoRa Protocol
401 -
402 -== Package Info ==
403 -
404 -* LA66 USB LoRaWAN Adapter x 1
405 -
406 -= Reference =
407 -
408 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
409 -
410 410  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20230605151850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +532.8 KB
Content
image-20230605151850-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +534.2 KB
Content
image-20230605151850-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230605151850-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +42.7 KB
Content
image-20230605151851-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
image-20230605151851-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.3 KB
Content
image-20230605151851-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +67.2 KB
Content
image-20230605151851-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.3 KB
Content
image-20230605151851-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +26.3 KB
Content
image-20230605151851-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.9 KB
Content
image-20230605151851-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
image-20230605152412-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.2 KB
Content