Skip to Content
Last modified by Xiaoling on 2023/09/19 09:20
From version 148.2
edited by Xiaoling
on 2022/09/15 10:45
Change comment: There is no comment for this version
To version 75.1
edited by Edwin Chen
on 2022/07/03 00:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,62 +1,103 @@
1 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
2 +{{toc/}}
3 +{{/box}}
2 2  
3 -**Table of Contents:**
5 += LA66 LoRaWAN Module =
4 4  
5 -{{toc/}}
7 +== What is LA66 LoRaWAN Module ==
6 6  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
7 7  
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
8 8  
9 -= 1.  LA66 LoRaWAN Module =
13 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
10 10  
15 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
17 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
13 13  
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
20 +== Features ==
19 19  
20 -(((
21 -
22 -)))
22 +* Support LoRaWAN v1.0.4 protocol
23 +* Support peer-to-peer protocol
24 +* TCXO crystal to ensure RF performance on low temperature
25 +* SMD Antenna pad and i-pex antenna connector
26 +* Available in different frequency LoRaWAN frequency bands.
27 +* World-wide unique OTAA keys.
28 +* AT Command via UART-TTL interface
29 +* Firmware upgradable via UART interface
30 +* Ultra-long RF range
23 23  
24 -(((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
32 +== Specification ==
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
34 +* CPU: 32-bit 48 MHz
35 +* Flash: 256KB
36 +* RAM: 64KB
37 +* Input Power Range: 1.8v ~~ 3.7v
38 +* Power Consumption: < 4uA.
39 +* Frequency Range: 150 MHz ~~ 960 MHz
40 +* Maximum Power +22 dBm constant RF output
41 +* High sensitivity: -148 dBm
42 +* Temperature:
43 +** Storage: -55 ~~ +125℃
44 +** Operating: -40 ~~ +85℃
45 +* Humidity:
46 +** Storage: 5 ~~ 95% (Non-Condensing)
47 +** Operating: 10 ~~ 95% (Non-Condensing)
48 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
49 +* LoRa Rx current: <9 mA
50 +* I/O Voltage: 3.3v
34 34  
35 -(((
36 -(((
37 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
52 +== AT Command ==
39 39  
40 -(((
41 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
44 44  
45 -(((
46 -(((
47 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
57 +== Dimension ==
51 51  
59 +[[image:image-20220517072526-1.png]]
52 52  
53 -== 1.2  Features ==
54 54  
62 +== Pin Mapping ==
55 55  
56 -* Support LoRaWAN v1.0.3 protocol
64 +[[image:image-20220523101537-1.png]]
65 +
66 +== Land Pattern ==
67 +
68 +[[image:image-20220517072821-2.png]]
69 +
70 +
71 +== Order Info ==
72 +
73 +Part Number: **LA66-XXX**
74 +
75 +**XX**: The default frequency band
76 +
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
86 +
87 += LA66 LoRaWAN Shield =
88 +
89 +== Overview ==
90 +
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 +
93 +
94 +== Features ==
95 +
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
57 57  * Support peer-to-peer protocol
58 58  * TCXO crystal to ensure RF performance on low temperature
59 -* SMD Antenna pad and i-pex antenna connector
100 +* SMA connector
60 60  * Available in different frequency LoRaWAN frequency bands.
61 61  * World-wide unique OTAA keys.
62 62  * AT Command via UART-TTL interface
... ... @@ -63,17 +63,155 @@
63 63  * Firmware upgradable via UART interface
64 64  * Ultra-long RF range
65 65  
107 +== Specification ==
66 66  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
67 67  
127 +== Pin Mapping & LED ==
68 68  
69 -== 1.3  Specification ==
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
70 70  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
71 71  
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
134 +
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
136 +
137 +=== Items needed for update ===
138 +
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
142 +
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
144 +
145 +
146 +=== Connection ===
147 +
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
149 +
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
154 +
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield.
156 +
157 +Connect USB TTL Adapter to PC after connecting the wires
158 +
159 +
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
161 +
162 +
163 +=== Upgrade steps ===
164 +
165 +==== Switch SW1 to put in ISP position ====
166 +
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
168 +
169 +
170 +==== Press the RST switch once ====
171 +
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
173 +
174 +
175 +==== Open the Upgrade tool (Tremo Programmer) in PC ====
176 +
177 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
178 +
179 +[[image:image-20220602103227-6.png]]
180 +
181 +[[image:image-20220602103357-7.png]]
182 +
183 +===== Select the COM port corresponding to USB TTL =====
184 +
185 +[[image:image-20220602103844-8.png]]
186 +
187 +===== Select the bin file to burn =====
188 +
189 +[[image:image-20220602104144-9.png]]
190 +
191 +[[image:image-20220602104251-10.png]]
192 +
193 +[[image:image-20220602104402-11.png]]
194 +
195 +===== Click to start the download =====
196 +
197 +[[image:image-20220602104923-13.png]]
198 +
199 +===== The following figure appears to prove that the burning is in progress =====
200 +
201 +[[image:image-20220602104948-14.png]]
202 +
203 +===== The following picture appears to prove that the burning is successful =====
204 +
205 +[[image:image-20220602105251-15.png]]
206 +
207 +
208 +== Order Info ==
209 +
210 +Part Number: **LA66-LoRaWAN-Shield-XXX**
211 +
212 +**XX**: The default frequency band
213 +
214 +* **AS923**: LoRaWAN AS923 band
215 +* **AU915**: LoRaWAN AU915 band
216 +* **EU433**: LoRaWAN EU433 band
217 +* **EU868**: LoRaWAN EU868 band
218 +* **KR920**: LoRaWAN KR920 band
219 +* **US915**: LoRaWAN US915 band
220 +* **IN865**: LoRaWAN IN865 band
221 +* **CN470**: LoRaWAN CN470 band
222 +* **PP**: Peer to Peer LoRa Protocol
223 +
224 +== Package Info ==
225 +
226 +* LA66 LoRaWAN Shield x 1
227 +* RF Antenna x 1
228 +
229 +
230 += LA66 USB LoRaWAN Adapter =
231 +
232 +== Overview ==
233 +
234 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
235 +
236 +
237 +== Features ==
238 +
239 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
240 +* Ultra-long RF range
241 +* Support LoRaWAN v1.0.4 protocol
242 +* Support peer-to-peer protocol
243 +* TCXO crystal to ensure RF performance on low temperature
244 +* Spring RF antenna
245 +* Available in different frequency LoRaWAN frequency bands.
246 +* World-wide unique OTAA keys.
247 +* AT Command via UART-TTL interface
248 +* Firmware upgradable via UART interface
249 +
250 +== Specification ==
251 +
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
75 -* Input Power Range: 1.8v ~~ 3.7v
76 -* Power Consumption: < 4uA.
255 +* Input Power Range: 5v
77 77  * Frequency Range: 150 MHz ~~ 960 MHz
78 78  * Maximum Power +22 dBm constant RF output
79 79  * High sensitivity: -148 dBm
... ... @@ -85,71 +85,119 @@
85 85  ** Operating: 10 ~~ 95% (Non-Condensing)
86 86  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
87 87  * LoRa Rx current: <9 mA
88 -* I/O Voltage: 3.3v
89 89  
268 +== Pin Mapping & LED ==
90 90  
270 +== Example Send & Get Messages via LoRaWAN in PC ==
91 91  
272 +Connect the LA66 LoRa Shield to the PC
92 92  
93 -== 1.4  AT Command ==
274 +[[image:image-20220602171217-1.png||height="615" width="915"]]
94 94  
276 +Open the serial port tool
95 95  
96 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in[[ AT Command documents>>https://www.dropbox.com/sh/wtq43za8sykpgta/AABAEE02uEAsRU-JV7bzEhMba?dl=0]].
278 +[[image:image-20220602161617-8.png]]
97 97  
280 +[[image:image-20220602161718-9.png||height="529" width="927"]]
98 98  
282 +Press the reset switch RST on the LA66 LoRa Shield.
99 99  
100 -== 1.5  Dimension ==
284 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
101 101  
286 +[[image:image-20220602161935-10.png]]
102 102  
103 -[[image:image-20220718094750-3.png]]
288 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
104 104  
290 +example: AT+SENDB=01,02,8,05820802581ea0a5
105 105  
292 +[[image:image-20220602162157-11.png]]
106 106  
107 -== 1.6  Pin Mapping ==
294 +Check to see if TTN received the message
108 108  
109 -[[image:image-20220720111850-1.png]]
296 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
110 110  
298 +== Example Send & Get Messages via LoRaWAN in RPi ==
111 111  
300 +Connect the LA66 LoRa Shield to the RPI
112 112  
113 -== 1.7  Land Pattern ==
302 +[[image:image-20220602171233-2.png||height="592" width="881"]]
114 114  
304 +Log in to the RPI's terminal and connect to the serial port
115 115  
116 -[[image:image-20220517072821-2.png]]
306 +[[image:image-20220602153146-3.png]]
117 117  
308 +Press the reset switch RST on the LA66 LoRa Shield.
309 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
118 118  
311 +[[image:image-20220602154928-5.png]]
119 119  
120 -= 2.  FAQ =
313 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
121 121  
315 +example: AT+SENDB=01,02,8,05820802581ea0a5
122 122  
123 -== 2.1  How to Compile Source Code for LA66? ==
317 +[[image:image-20220602160339-6.png]]
124 124  
319 +Check to see if TTN received the message
125 125  
126 -Compile and Upload Code to ASR6601 Platform：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
321 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
127 127  
323 +=== Install Minicom ===
128 128  
325 +Enter the following command in the RPI terminal
129 129  
130 -== 2.2 Can i use LA66 module's internal I/O without external MCU, So to save product cost? ==
327 +apt update
131 131  
329 +[[image:image-20220602143155-1.png]]
132 132  
133 -Yes, this is possible, user can refer[[ the source code from ASR >>https://github.com/asrlora/asr_lora_6601/tree/master/projects/ASR6601SE-EVAL/examples/lora]]to get examples for how to its I/O Interfaces.
331 +apt install minicom
134 134  
333 +[[image:image-20220602143744-2.png]]
135 135  
335 +=== Send PC's CPU/RAM usage to TTN via script. ===
136 136  
137 -= 3.  Order Info =
337 +==== Take python as an example： ====
138 138  
339 +===== Preconditions: =====
139 139  
140 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**
341 +1.LA66 USB LoRaWAN Adapter works fine
141 141  
343 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
142 142  
143 -(% style="color:blue" %)**XXX**(%%): The default frequency band
345 +===== Steps for usage =====
144 144  
145 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
146 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
147 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
148 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
149 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
150 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
151 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
152 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
153 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
347 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
154 154  
349 +2.Run the script and see the TTN
350 +
351 +[[image:image-20220602115852-3.png]]
352 +
353 +
354 +
355 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
356 +
357 +
358 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
359 +
360 +
361 +
362 +== Order Info ==
363 +
364 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
365 +
366 +**XX**: The default frequency band
367 +
368 +* **AS923**: LoRaWAN AS923 band
369 +* **AU915**: LoRaWAN AU915 band
370 +* **EU433**: LoRaWAN EU433 band
371 +* **EU868**: LoRaWAN EU868 band
372 +* **KR920**: LoRaWAN KR920 band
373 +* **US915**: LoRaWAN US915 band
374 +* **IN865**: LoRaWAN IN865 band
375 +* **CN470**: LoRaWAN CN470 band
376 +* **PP**: Peer to Peer LoRa Protocol
377 +
378 +== Package Info ==
379 +
380 +* LA66 USB LoRaWAN Adapter x 1
381 +
155 155  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content