Last modified by Xiaoling on 2023/09/19 09:20
<
From version < 134.6 >
edited by Xiaoling
on 2022/07/26 10:41
To version < 148.4 >
edited by Xiaoling
on 2022/09/26 14:35
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Module User Manual
Content
... ... @@ -52,7 +52,8 @@
52 52  
53 53  == 1.2  Features ==
54 54  
55 -* Support LoRaWAN v1.0.4 protocol
55 +
56 +* Support LoRaWAN v1.0.3 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 58  * SMD Antenna pad and i-pex antenna connector
... ... @@ -66,6 +66,7 @@
66 66  
67 67  == 1.3  Specification ==
68 68  
70 +
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
... ... @@ -89,12 +89,13 @@
89 89  == 1.4  AT Command ==
90 90  
91 91  
92 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
94 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in[[ AT Command documents>>https://www.dropbox.com/sh/wtq43za8sykpgta/AABAEE02uEAsRU-JV7bzEhMba?dl=0]].
93 93  
94 94  
95 95  
96 96  == 1.5  Dimension ==
97 97  
100 +
98 98  [[image:image-20220718094750-3.png]]
99 99  
100 100  
... ... @@ -107,603 +107,41 @@
107 107  
108 108  == 1.7  Land Pattern ==
109 109  
113 +
110 110  [[image:image-20220517072821-2.png]]
111 111  
112 112  
113 113  
114 -= 2.  LA66 LoRaWAN Shield =
118 += 2.  FAQ =
115 115  
116 116  
117 -== 2.1  Overview ==
121 +== 2.1  How to Compile Source Code for LA66? ==
118 118  
119 119  
120 -(((
121 -[[image:image-20220715000826-2.png||height="145" width="220"]]
122 -)))
124 +Compile and Upload Code to ASR6601 Platform：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
123 123  
124 -(((
125 -
126 -)))
127 127  
128 -(((
129 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
130 -)))
131 131  
132 -(((
133 -(((
134 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
135 -)))
136 -)))
128 +== 2.2 Can i use LA66 module's internal I/O without external MCU, So to save product cost? ==
137 137  
138 -(((
139 -(((
140 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
141 -)))
142 -)))
143 143  
144 -(((
145 -(((
146 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
147 -)))
148 -)))
131 +Yes, this is possible, user can refer[[ the source code from ASR >>https://github.com/asrlora/asr_lora_6601/tree/master/projects/ASR6601SE-EVAL/examples/lora]]to get examples for how to its I/O Interfaces.
149 149  
150 -(((
151 -(((
152 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
153 -)))
154 -)))
155 155  
156 156  
135 +== 2.3  Where to find Peer-to-Peer firmware of LA66? ==
157 157  
158 -== 2.2  Features ==
159 159  
160 -* Arduino Shield base on LA66 LoRaWAN module
161 -* Support LoRaWAN v1.0.4 protocol
162 -* Support peer-to-peer protocol
163 -* TCXO crystal to ensure RF performance on low temperature
164 -* SMA connector
165 -* Available in different frequency LoRaWAN frequency bands.
166 -* World-wide unique OTAA keys.
167 -* AT Command via UART-TTL interface
168 -* Firmware upgradable via UART interface
169 -* Ultra-long RF range
138 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
170 170  
171 171  
172 172  
173 -== 2.3  Specification ==
142 += 3.  Order Info =
174 174  
175 -* CPU: 32-bit 48 MHz
176 -* Flash: 256KB
177 -* RAM: 64KB
178 -* Input Power Range: 1.8v ~~ 3.7v
179 -* Power Consumption: < 4uA.
180 -* Frequency Range: 150 MHz ~~ 960 MHz
181 -* Maximum Power +22 dBm constant RF output
182 -* High sensitivity: -148 dBm
183 -* Temperature:
184 -** Storage: -55 ~~ +125℃
185 -** Operating: -40 ~~ +85℃
186 -* Humidity:
187 -** Storage: 5 ~~ 95% (Non-Condensing)
188 -** Operating: 10 ~~ 95% (Non-Condensing)
189 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
190 -* LoRa Rx current: <9 mA
191 -* I/O Voltage: 3.3v
192 192  
145 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**
193 193  
194 194  
195 -== 2.4  LED ==
196 -
197 -
198 -~1. The LED lights up red when there is an upstream data packet
199 -2. When the network is successfully connected, the green light will be on for 5 seconds
200 -3. Purple light on when receiving downlink data packets
201 -
202 -
203 -
204 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
205 -
206 -
207 -**Show connection diagram：**
208 -
209 -
210 -[[image:image-20220723170210-2.png||height="908" width="681"]]
211 -
212 -
213 -
214 -(% style="color:blue" %)**1.  open Arduino IDE**
215 -
216 -
217 -[[image:image-20220723170545-4.png]]
218 -
219 -
220 -
221 -(% style="color:blue" %)**2.  Open project**
222 -
223 -
224 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
225 -
226 -
227 -
228 -
229 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
230 -
231 -
232 -
233 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
234 -
235 -
236 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
237 -
238 -
239 -
240 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
241 -
242 -
243 -(% style="color:blue" %)**1.  Open project**
244 -
245 -
246 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
247 -
248 -[[image:image-20220723172502-8.png]]
249 -
250 -
251 -
252 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
253 -
254 -
255 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
256 -
257 -
258 -
259 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
260 -
261 -
262 -(% style="color:blue" %)**1.  Open project**
263 -
264 -
265 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
266 -
267 -
268 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
269 -
270 -
271 -
272 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
273 -
274 -
275 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
276 -
277 -
278 -
279 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
280 -
281 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
282 -
283 -[[image:image-20220723175700-12.png||height="602" width="995"]]
284 -
285 -
286 -
287 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
288 -
289 -
290 -=== 2.8.1  Items needed for update ===
291 -
292 -
293 -1. LA66 LoRaWAN Shield
294 -1. Arduino
295 -1. USB TO TTL Adapter
296 -
297 -[[image:image-20220602100052-2.png||height="385" width="600"]]
298 -
299 -
300 -=== 2.8.2  Connection ===
301 -
302 -
303 -[[image:image-20220602101311-3.png||height="276" width="600"]]
304 -
305 -
306 -(((
307 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
308 -)))
309 -
310 -(((
311 -(% style="background-color:yellow" %)**GND  <-> GND
312 -TXD  <->  TXD
313 -RXD  <->  RXD**
314 -)))
315 -
316 -
317 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
318 -
319 -Connect USB TTL Adapter to PC after connecting the wires
320 -
321 -
322 -[[image:image-20220602102240-4.png||height="304" width="600"]]
323 -
324 -
325 -=== 2.8.3  Upgrade steps ===
326 -
327 -
328 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
329 -
330 -
331 -[[image:image-20220602102824-5.png||height="306" width="600"]]
332 -
333 -
334 -
335 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
336 -
337 -
338 -[[image:image-20220602104701-12.png||height="285" width="600"]]
339 -
340 -
341 -
342 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
343 -
344 -
345 -(((
346 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
347 -)))
348 -
349 -
350 -[[image:image-20220602103227-6.png]]
351 -
352 -
353 -[[image:image-20220602103357-7.png]]
354 -
355 -
356 -
357 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
358 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
359 -
360 -
361 -[[image:image-20220602103844-8.png]]
362 -
363 -
364 -
365 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
366 -(% style="color:blue" %)**3. Select the bin file to burn**
367 -
368 -
369 -[[image:image-20220602104144-9.png]]
370 -
371 -
372 -[[image:image-20220602104251-10.png]]
373 -
374 -
375 -[[image:image-20220602104402-11.png]]
376 -
377 -
378 -
379 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
380 -(% style="color:blue" %)**4. Click to start the download**
381 -
382 -[[image:image-20220602104923-13.png]]
383 -
384 -
385 -
386 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
387 -(% style="color:blue" %)**5. Check update process**
388 -
389 -
390 -[[image:image-20220602104948-14.png]]
391 -
392 -
393 -
394 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
395 -(% style="color:blue" %)**The following picture shows that the burning is successful**
396 -
397 -[[image:image-20220602105251-15.png]]
398 -
399 -
400 -
401 -= 3.  LA66 USB LoRaWAN Adapter =
402 -
403 -
404 -== 3.1  Overview ==
405 -
406 -
407 -[[image:image-20220715001142-3.png||height="145" width="220"]]
408 -
409 -
410 -(((
411 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
412 -)))
413 -
414 -(((
415 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
416 -)))
417 -
418 -(((
419 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
420 -)))
421 -
422 -(((
423 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
424 -)))
425 -
426 -(((
427 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
428 -)))
429 -
430 -
431 -
432 -== 3.2  Features ==
433 -
434 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
435 -* Ultra-long RF range
436 -* Support LoRaWAN v1.0.4 protocol
437 -* Support peer-to-peer protocol
438 -* TCXO crystal to ensure RF performance on low temperature
439 -* Spring RF antenna
440 -* Available in different frequency LoRaWAN frequency bands.
441 -* World-wide unique OTAA keys.
442 -* AT Command via UART-TTL interface
443 -* Firmware upgradable via UART interface
444 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
445 -
446 -
447 -== 3.3  Specification ==
448 -
449 -* CPU: 32-bit 48 MHz
450 -* Flash: 256KB
451 -* RAM: 64KB
452 -* Input Power Range: 5v
453 -* Frequency Range: 150 MHz ~~ 960 MHz
454 -* Maximum Power +22 dBm constant RF output
455 -* High sensitivity: -148 dBm
456 -* Temperature:
457 -** Storage: -55 ~~ +125℃
458 -** Operating: -40 ~~ +85℃
459 -* Humidity:
460 -** Storage: 5 ~~ 95% (Non-Condensing)
461 -** Operating: 10 ~~ 95% (Non-Condensing)
462 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
463 -* LoRa Rx current: <9 mA
464 -
465 -
466 -== 3.4  Pin Mapping & LED ==
467 -
468 -
469 -
470 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
471 -
472 -
473 -(((
474 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
475 -)))
476 -
477 -
478 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
479 -
480 -
481 -[[image:image-20220723100027-1.png]]
482 -
483 -
484 -Open the serial port tool
485 -
486 -[[image:image-20220602161617-8.png]]
487 -
488 -[[image:image-20220602161718-9.png||height="457" width="800"]]
489 -
490 -
491 -
492 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
493 -
494 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
495 -
496 -
497 -[[image:image-20220602161935-10.png||height="498" width="800"]]
498 -
499 -
500 -
501 -(% style="color:blue" %)**3. See Uplink Command**
502 -
503 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
504 -
505 -example: AT+SENDB=01,02,8,05820802581ea0a5
506 -
507 -[[image:image-20220602162157-11.png||height="497" width="800"]]
508 -
509 -
510 -
511 -(% style="color:blue" %)**4. Check to see if TTN received the message**
512 -
513 -[[image:image-20220602162331-12.png||height="420" width="800"]]
514 -
515 -
516 -
517 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
518 -
519 -
520 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
521 -
522 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
523 -
524 -(% style="color:red" %)**Preconditions:**
525 -
526 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
527 -
528 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
529 -
530 -
531 -
532 -(% style="color:blue" %)**Steps for usage:**
533 -
534 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
535 -
536 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
537 -
538 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
539 -
540 -
541 -
542 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
543 -
544 -
545 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
546 -
547 -
548 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
549 -
550 -[[image:image-20220723100439-2.png]]
551 -
552 -
553 -
554 -(% style="color:blue" %)**2. Install Minicom in RPi.**
555 -
556 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
557 -
558 - (% style="background-color:yellow" %)**apt update**
559 -
560 - (% style="background-color:yellow" %)**apt install minicom**
561 -
562 -
563 -Use minicom to connect to the RPI's terminal
564 -
565 -[[image:image-20220602153146-3.png||height="439" width="500"]]
566 -
567 -
568 -
569 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
570 -
571 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
572 -
573 -
574 -[[image:image-20220602154928-5.png||height="436" width="500"]]
575 -
576 -
577 -
578 -(% style="color:blue" %)**4. Send Uplink message**
579 -
580 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
581 -
582 -example: AT+SENDB=01,02,8,05820802581ea0a5
583 -
584 -
585 -[[image:image-20220602160339-6.png||height="517" width="600"]]
586 -
587 -
588 -
589 -Check to see if TTN received the message
590 -
591 -[[image:image-20220602160627-7.png||height="369" width="800"]]
592 -
593 -
594 -
595 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
596 -
597 -
598 -=== 3.8.1 DRAGINO-LA66-APP ===
599 -
600 -
601 -[[image:image-20220723102027-3.png]]
602 -
603 -
604 -
605 -==== (% style="color:blue" %)**Overview：**(%%) ====
606 -
607 -
608 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
609 -
610 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
611 -
612 -
613 -
614 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
615 -
616 -
617 -Requires a type-c to USB adapter
618 -
619 -[[image:image-20220723104754-4.png]]
620 -
621 -
622 -
623 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
624 -
625 -
626 -Function and page introduction
627 -
628 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
629 -
630 -1.Display LA66 USB LoRaWAN Module connection status
631 -
632 -2.Check and reconnect
633 -
634 -3.Turn send timestamps on or off
635 -
636 -4.Display LoRaWan connection status
637 -
638 -5.Check LoRaWan connection status
639 -
640 -6.The RSSI value of the node when the ACK is received
641 -
642 -7.Node's Signal Strength Icon
643 -
644 -8.Set the packet sending interval of the node in seconds
645 -
646 -9.AT command input box
647 -
648 -10.Send AT command button
649 -
650 -11.Node log box
651 -
652 -12.clear log button
653 -
654 -13.exit button
655 -
656 -
657 -LA66 USB LoRaWAN Module not connected
658 -
659 -[[image:image-20220723110520-5.png||height="903" width="677"]]
660 -
661 -
662 -
663 -Connect LA66 USB LoRaWAN Module
664 -
665 -[[image:image-20220723110626-6.png||height="906" width="680"]]
666 -
667 -
668 -
669 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
670 -
671 -
672 -**1.  Register LA66 USB LoRaWAN Module to TTNV3**
673 -
674 -[[image:image-20220723134549-8.png]]
675 -
676 -
677 -
678 -**2.  Open Node-RED,And import the JSON file to generate the flow**
679 -
680 -Sample JSON file please go to this link to download：放置JSON文件的链接
681 -
682 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
683 -
684 -The following is the positioning effect map
685 -
686 -[[image:image-20220723144339-1.png]]
687 -
688 -
689 -
690 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
691 -
692 -
693 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
694 -
695 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
696 -
697 -[[image:image-20220723150132-2.png]]
698 -
699 -
700 -
701 -= 4.  Order Info =
702 -
703 -
704 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
705 -
706 -
707 707  (% style="color:blue" %)**XXX**(%%): The default frequency band
708 708  
709 709  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -716,7 +716,4 @@
716 716  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
717 717  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
718 718  
719 -= 5.  Reference =
720 -
721 -
722 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
160 +
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0