Last modified by Xiaoling on 2024/04/23 14:37
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -9,12 +9,6 @@ 9 9 ))) 10 10 11 11 12 - 13 - 14 - 15 - 16 - 17 - 18 18 **Table of Contents:** 19 19 20 20 (% aria-label="macro:toc widget" contenteditable="false" role="region" tabindex="-1" %) ... ... @@ -35,25 +35,15 @@ 35 35 == 1.1 What is GroPoint Air == 36 36 37 37 38 -((( 39 39 The Dragino GroPoint is a (% style="color:blue" %)**LoRaWAN Multi Soil Segment Converter**(%%) for IoT of Agriculture. It is designed to connect to [[GroPoint Profile Multi-depth Soil moisture and temperature profile Sensor>>url:https://www.gropoint.com/products/soil-sensors/gropoint-profile]] and get GroPoint Profile’s reading and send it to IoT server via LoRaWAN wireless network. 40 -))) 41 41 42 -((( 43 43 (% style="color:blue" %)**GroPoint Profile is plug-and-play with GroPoint Air**(%%) to get soil moisture and send via wireless. GroPoint Profile is powered by GroPoint Air, (% style="color:blue" %)**no need external power source**(%%). 44 -))) 45 45 46 -((( 47 47 The LoRa wireless technology used in GroPoint Air allows devices to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. 48 -))) 49 49 50 -((( 51 51 GroPoint Air is powered by (% style="color:blue" %)**an 8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use for up to 5 years. 52 -))) 53 53 54 -((( 55 55 Each GroPoint Air is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to the local LoRaWAN server and it will auto-connect after power on. 56 -))) 57 57 58 58 (% aria-label="image-20220530002019-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220530002019-2.png||data-widget="image" height="295" width="655"]](% title="Click and drag to resize" %) 59 59 ... ... @@ -60,7 +60,6 @@ 60 60 61 61 == 1.2 Features == 62 62 63 - 64 64 * LoRaWAN 1.0.3 Class A 65 65 * Ultra-low power consumption 66 66 * Supports GroPoint Profile ... ... @@ -72,29 +72,19 @@ 72 72 * 8500mAh Battery for long term use 73 73 74 74 75 - 76 76 == 1.3 Probe Specification == 77 77 78 - 79 -((( 80 80 GroPoint Air includes an M12 5-pin connector, the pins definition matches GroPoint Profile M12 version probes. Users can connect this connector to GroPoint Profile directly. 81 -))) 82 82 83 -((( 84 84 GroPoint Profile includes a series of multi-depth soil moisture and temperature sensors. The specification for GroPoint Profile can be found here: [[https:~~/~~/www.gropoint.com/products/soil-sensors/gropoint-profile>>https://www.gropoint.com/products/soil-sensors/gropoint-profile]] 85 -))) 86 86 87 87 88 88 == 1.4 Applications == 89 89 90 - 91 91 * Smart Agriculture 92 92 93 - 94 - 95 95 == 1.5 Pin Mapping == 96 96 97 - 98 98 Inner PCB Pin mapping for reference: 99 99 100 100 (% aria-label="image-20220530002453-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220530002453-3.png||data-widget="image" height="262" width="493"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) ... ... @@ -104,7 +104,6 @@ 104 104 105 105 == 2.1 LED Indicator == 106 106 107 - 108 108 The GroPoint Air has an internal LED which can show the status of different states. 109 109 110 110 * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected. ... ... @@ -111,12 +111,10 @@ 111 111 * Blink once when device transmits a packet. 112 112 113 113 114 - 115 115 == 2.2 Firmware and Changelog == 116 116 117 - 118 118 ((( 119 -Firmware Download Location: [[https:~~/~~/www.dro pbox.com/sh/xjj8dh5zs1zre20/AAB5pGtSHItnTrpPLUpRNJAYa?dl=0>>https://www.dropbox.com/sh/xjj8dh5zs1zre20/AAB5pGtSHItnTrpPLUpRNJAYa?dl=0]]89 +Firmware Download Location: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/GroPoint_Air/firmware/>>https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/GroPoint_Air/firmware/]] 120 120 ))) 121 121 122 122 ((( ... ... @@ -132,76 +132,45 @@ 132 132 133 133 == 3.1 Connect to GroPoint Profile == 134 134 135 - 136 -((( 137 137 GroPoint Air must be used with [[GroPoint Profile>>https://www.gropoint.com/products/soil-sensors/gropoint-profile]]. There are different interface model from GroPoint, users need to choose the one: 138 -))) 139 139 140 -* ((( 141 -Support RS485 Interface 142 -))) 143 -* ((( 144 -with M12 5pin connector. 145 -))) 107 +* Support RS485 Interface 108 +* with M12 5pin connector. 146 146 147 -((( 148 148 Such model in GroPoint Profile is: (% style="color:blue" %)**2625-N-T-x-M-M **(%%)(Where x is different depending on how many levels it detects). 149 -))) 150 150 151 151 152 152 == 3.2 Connect to LoRaWAN Network? == 153 153 154 - 155 155 Each GroPoint Air is shipped with a worldwide unique set of OTAA keys. To use GroPoint Air in a LoRaWAN network, user needs to input the OTAA keys in the LoRaWAN network server. So GroPoint Air can join the LoRaWAN network and start to transmit sensor data 156 156 157 157 158 158 == 3.3 Example to use for LoRaWAN network == 159 159 160 - 161 -((( 162 162 This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are similar. 163 -))) 164 164 165 -* ((( 166 -In this use case, the GroPoint Air measures soil moisture and temperature and sends the status to the LoRaWAN server.The GroPoint Air will uplink different types of messages to the LoRaWAN server. See [[Uplink payload>>||anchor="H3.4A0UplinkPayloadAnalyze"]] for detail. 167 -))) 122 +* In this use case, the GroPoint Air measures soil moisture and temperature and sends the status to the LoRaWAN server.The GroPoint Air will uplink different types of messages to the LoRaWAN server. See [[Uplink payload>>||anchor="H3.4A0UplinkPayloadAnalyze"]] for detail. 168 168 169 -((( 170 170 Assume the DLOS8 is already set to connect to the [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the GroPoint Air device in TTN V3: 171 -))) 172 172 173 -((( 174 - 175 -))) 176 176 177 -((( 178 178 (% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from GroPoint Air. 179 -))) 180 180 181 -((( 182 182 Each GroPoint Air is shipped with a sticker with the default device EUI as below: 183 -))) 184 184 185 -[[image:image-20230426084611-1.png||height="262" width="564"]](% style="display:none" %) 186 186 187 -(% title="Click and drag to resize" %) 132 +(% aria-label="1652944593868-618.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652944593868-618.png?rev=1.1||alt="1652944593868-618.png" data-widget="image"]](% title="Click and drag to resize" %) 188 188 189 189 Users can enter these keys in the LoRaWAN Server portal. Below is the TTN V3 screenshot: 190 190 191 191 **Add APP EUI in the application.** 192 192 193 -(% aria-label="image-20220519151704-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-1.png?rev=1.1||alt="image-20220519151704-1.png" data-widget="image"]] 138 +(% aria-label="image-20220519151704-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-1.png?rev=1.1||alt="image-20220519151704-1.png" data-widget="image"]](% title="Click and drag to resize" %) 194 194 195 -(% title="Click and drag to resize" %) 140 +(% aria-label="image-20220519151704-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-2.png?width=717&height=322&rev=1.1||alt="image-20220519151704-2.png" data-widget="image" height="322" width="717"]](% title="Click and drag to resize" %) 196 196 197 -(% aria-label="image-20220519151704- 2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-2.png?width=717&height=322&rev=1.1||alt="image-20220519151704-2.png" data-widget="image"height="322" width="717"]]142 +(% aria-label="image-20220519151704-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-3.png?rev=1.1||alt="image-20220519151704-3.png" data-widget="image"]](% title="Click and drag to resize" %) 198 198 199 -(% title="Click and drag to resize" %) 200 - 201 -(% aria-label="image-20220519151704-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-3.png?rev=1.1||alt="image-20220519151704-3.png" data-widget="image"]] 202 - 203 -(% title="Click and drag to resize" %) 204 - 205 205 (% aria-label="image-20220519151704-4.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-4.png?rev=1.1||alt="image-20220519151704-4.png" data-widget="image"]](% title="Click and drag to resize" %) 206 206 207 207 **Add APP KEY and DEV EUI** ... ... @@ -209,63 +209,45 @@ 209 209 210 210 (% style="color:blue" %)**Step 2**(%%): Power on GroPoint Air 211 211 212 -(% aria-label="image-20220519094347-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519094347-1.png?width=725&height=430&rev=1.1||alt="image-20220519094347-1.png" data-widget="image" height="430" width="725"]] 151 +(% aria-label="image-20220519094347-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519094347-1.png?width=725&height=430&rev=1.1||alt="image-20220519094347-1.png" data-widget="image" height="430" width="725"]](% title="Click and drag to resize" %) 213 213 214 -(% title="Click and drag to resize" %) 215 - 216 -((( 217 217 Put the jumper to power on GroPoint Air and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and the user can see it in the panel. 218 -))) 219 219 220 220 (% aria-label="image-20220611174943-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611174943-1.png||data-widget="image" height="139" width="1008"]](% title="Click and drag to resize" %) 221 221 222 222 223 -(% style="display:none" %) (%%) 224 - 225 225 === **Decoder in TTN V3** === 226 226 227 227 (% aria-label="1652927365661-475.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652927365661-475.png?width=723&height=359&rev=1.1||alt="1652927365661-475.png" data-widget="image" height="359" width="723"]](% title="Click and drag to resize" %) 228 228 229 -Please check the decoder [gropoint_Decoder_V1.0.0.js] from this link: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]162 +Please check the decoder [gropoint_Decoder_V1.0.0.js] from this link: 230 230 164 +[[https:~~/~~/www.dropbox.com/sh/p3n1ddms7xmjpm2/AACdIXfC7jVkrE6Y3VI_pVQxa?dl=0>>https://www.dropbox.com/sh/p3n1ddms7xmjpm2/AACdIXfC7jVkrE6Y3VI_pVQxa?dl=0]] 231 231 232 -== 3.4 Uplink Payload Analyze == 233 233 234 234 235 -((( 168 +== 3.4 Uplink Payload Analyze == 169 + 236 236 Uplink payloads have two types: 237 -))) 238 238 239 239 * ((( 240 -((( 241 241 Report temperature and humidity status normally: Use FPORT=2 242 242 ))) 243 -))) 244 244 * ((( 245 -((( 246 246 Other control commands: Use other FPORT fields. 247 247 ))) 248 -))) 249 249 250 -((( 251 251 The application server should parse the correct value based on FPORT settings. 252 -))) 253 253 254 254 255 255 == 3.5 temperature and humidity Value, Uplink FPORT~=2 == 256 256 257 257 258 -((( 259 259 GroPoint Air will send this uplink after Device Status once join the LoRaWAN network successfully. And GroPoint Air will: 260 -))) 261 261 262 -((( 263 263 periodically send this uplink every 20 minutes, this interval can be changed. 264 -))) 265 265 266 -((( 267 267 The drawing below shows the probe dimensions of the 2-8 segment probes, Temperature sen sor locations provided in table below: 268 -))) 269 269 270 270 (% aria-label="image-20220621093414-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220621093414-1.png||data-widget="image" height="932" width="816"]](% title="Click and drag to resize" %) 271 271 ... ... @@ -277,47 +277,28 @@ 277 277 278 278 Uplink Payload totals 21 bytes. 279 279 280 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %) 281 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:42px" %)**2**|(% style="width:42px" %)**1**|(% style="width:42px" %)**2**|(% style="width:42px" %)**2**|(% style="width:42px" %)**2**|(% style="width:42px" %)**2**|(% style="width:42px" %)**2**|(% style="width:42px" %)**2**|(% style="width:42px" %)**2**|(% style="width:42px" %)**2**|(% style="width:42px" %)**2** 282 -|(% style="width:94px" %)**value**|(% style="width:38px" %)Bat|(% style="width:39px" %)sen|(% style="width:52px" %)Tem1|(% style="width:52px" %)Tem2|(% style="width:52px" %)Tem3|(% style="width:52px" %)Tem4|(% style="width:50px" %)Tem5|(% style="width:52px" %)Tem6|(% style="width:55px" %)Hum1|(% style="width:55px" %)Hum2|(% style="width:56px" %)Hum3 201 +(% aria-label="image-20220621100751-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220621100751-2.png||data-widget="image" height="124" width="774"]](% title="Click and drag to resize" %) 283 283 284 -(% title="Click and drag to resize" %) 285 - 286 286 (% aria-label="image-20220611174943-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611174943-1.png||data-widget="image" height="139" width="1008"]](% title="Click and drag to resize" %) 287 287 288 288 289 -((( 290 290 For US915 frequency, when DR=0 and the payload length exceeds 11, the DR of this packet is switched to 1. 291 -))) 292 292 293 -((( 294 294 For AU915 frequency, when DR=2,Dwelltime=1 and the payload length exceeds 11, the DR of this packet is switched to 3. 295 -))) 296 296 297 -((( 298 298 For AS923 frequency, when DR=2,Dwelltime=1 and the payload length exceeds 11, the DR of this packet is switched to 3. 299 -))) 300 300 301 301 302 302 == 3.6 Show data on Datacake == 303 303 304 - 305 -((( 306 306 Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps: 307 -))) 308 308 309 -((( 310 310 (% style="color:blue" %)**Step 1**(%%): Link TTNv3 to Datacake [[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]] 311 -))) 312 312 313 -((( 314 314 (% style="color:blue" %)**Step 2**(%%): Configure SW3L in Datacake 315 -))) 316 316 317 -(% aria-label="image-20220613171007-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220613171007-1.png||data-widget="image" height="567" width="542"]] 221 +(% aria-label="image-20220613171007-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220613171007-1.png||data-widget="image" height="567" width="542"]](% title="Click and drag to resize" %) 318 318 319 -(% title="Click and drag to resize" %) 320 - 321 321 (% aria-label="image-20220613171015-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220613171015-2.png||data-widget="image" height="600" width="586"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 322 322 323 323 (% aria-label="image-20220613171029-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220613171029-3.png||data-widget="image" height="507" width="513"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) ... ... @@ -337,187 +337,123 @@ 337 337 (% aria-label="image-20220613171124-7.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220613171124-7.png||data-widget="image" height="466" width="877"]](% title="Click and drag to resize" %) 338 338 339 339 242 + 340 340 = 4. Configure GroPoint Air via AT Command or LoRaWAN Downlink = 341 341 342 - 343 -((( 344 344 Use can configure GroPoint Air via AT Command or LoRaWAN Downlink. 345 -))) 346 346 347 -* ((( 348 -AT Command Connection: See [[FAQ>>||anchor="H7.A0FAQ"]]. 349 -))) 350 -* ((( 351 -LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://8.211.40.43/xwiki/bin/view/Main/]] 352 -))) 247 +* AT Command Connection: See [[FAQ>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/#H6.FAQ]]. 248 +* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://8.211.40.43/xwiki/bin/view/Main/]] 353 353 354 - (((250 + 355 355 There are two kinds of commands to configure GroPoint Air, they are: 356 -))) 357 357 358 358 * ((( 359 -((( 360 -**~ (% style="color:#4472c4" %)General Commands(%%)**(% style="color:#4472c4" %). 254 +**~ (% style="color:#4472C4" %)General Commands**. 361 361 ))) 362 -))) 363 363 364 -((( 365 365 These commands are to configure: 366 -))) 367 367 368 -* ((( 369 -General system settings like: uplink interval. 370 -))) 371 -* ((( 372 -LoRaWAN protocol & radio-related command. 373 -))) 259 +* General system settings like: uplink interval. 260 +* LoRaWAN protocol & radio-related command. 374 374 375 -((( 376 376 They are the same for all Dragino Device that support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>url:http://8.211.40.43/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]] 377 -))) 378 378 379 379 380 380 381 381 * ((( 382 -((( 383 -**~ (% style="color:#4472c4" %)Commands special design for GroPoint Air(%%)** 267 +**~ (% style="color:#4472C4" %)Commands special design for GroPoint Air** 384 384 ))) 385 -))) 386 386 387 -((( 388 388 These commands only valid for GroPoint Air, as below: 389 -))) 390 390 391 391 273 + 392 392 == 4.1 Set Transmit Interval Time == 393 393 394 - 395 395 Feature: Change LoRaWAN End Node Transmit Interval. 396 396 278 +**(% style="color:#037691" %)AT Command: AT+TDC** 397 397 398 -(% style="color:#037691" %)**ATCommand:AT+TDC**280 +(% aria-label="image-20220607171554-8.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/image-20220607171554-8.png?rev=1.1||alt="image-20220607171554-8.png" data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 399 399 400 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %) 401 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response** 402 -|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|((( 403 -30000 404 -OK 405 -the interval is 30000ms = 30s 406 -))) 407 -|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|((( 408 -OK 409 -Set transmit interval to 60000ms = 60 seconds 410 -))) 282 +**(% style="color:#037691" %)Downlink Command: 0x01** 411 411 412 -(% style="color:#037691" %)**Downlink Command: 0x01** 413 - 414 414 Format: Command Code (0x01) followed by 3 bytes time value. 415 415 416 416 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 417 417 418 -* Example 1: Downlink Payload: 0100001E 419 -* Example 2: Downlink Payload: 0100003C 288 +* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds 289 +* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds 420 420 421 -== 4.2 Set Interrupt Mode == 422 422 423 423 424 -Feature, Set Interrupt mode for GPIO_EXIT. 425 425 426 426 427 -(% style="color:#037691" %)**AT Command: AT+INTMOD** 428 428 429 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %) 430 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Response** 431 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)((( 432 -0 433 -OK 434 -the mode is 0 =No interruption 435 -))) 436 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)((( 437 -Set Transmit Interval 438 -~1. (Disable Interrupt), 439 -2. (Trigger by rising and falling edge) 440 -3. (Trigger by falling edge) 441 -4. (Trigger by rising edge) 442 -)))|(% style="width:157px" %)OK 296 +== 4.2 Set Interrupt Mode == 443 443 444 - (% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5);display:none"%)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation"title="Click and drag tomove" width="15"]](% title="Clickand drag toesize"%)298 +Feature, Set Interrupt mode for GPIO_EXIT. 445 445 446 -(% style="color:#037691" %) **DownlinkCommand:0x06**300 +**(% style="color:#037691" %)AT Command: AT+INTMOD** 447 447 302 +(% aria-label="image-20220607171716-9.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/image-20220607171716-9.png?rev=1.1||alt="image-20220607171716-9.png" data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 303 + 304 +**(% style="color:#037691" %)Downlink Command: 0x06** 305 + 448 448 Format: Command Code (0x06) followed by 3 bytes. 449 449 450 450 This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06. 451 451 452 -* Example 1: Downlink Payload: 06000000 453 -* Example 2: Downlink Payload: 06000003 310 +* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode 311 +* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger 454 454 455 -== 4.3 Set the sensor delay time == 456 456 457 457 458 -((( 459 -Feature: Change the sensor delay time. 460 460 461 - 462 -))) 463 463 464 -((( 465 -There are six models of GroPoint Air, and each model returns a different number of temperature and humidity. The more bytes of the returned value, the longer the delay. The AT+SDELAY command can adjust the time that the sensor returns data to the node, and can adjust different delays according to different types of sensors. 466 -))) 467 467 468 -((( 469 -The default delay is 1000ms. 470 -))) 318 +== 4.3 Set the sensor delay time == 471 471 472 -((( 473 -(% style="color:#037691" %)**AT Command: AT+SDELAY** 320 +Feature: Change the sensor delay time. 474 474 322 +There are six models of GroPoint Air, and each model returns a different number of temperature and humidity. The more bytes of the returned value, the longer the delay. The AT+SDELAY command can adjust the time that the sensor returns data to the node, and can adjust different delays according to different types of sensors. 475 475 476 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %) 477 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response** 478 -|(% style="width:156px" %)AT+SDELAY=?|(% style="width:137px" %)Show the sensor delay time|((( 479 -1000 480 -OK 481 -the sensor delay time is 1000ms 482 -))) 483 -|(% style="width:156px" %)AT+SDELAY=2000|(% style="width:137px" %)Set the sensor delay time|((( 484 -OK 485 -Set the sensor delay time to 2000ms 486 -))) 487 -))) 324 +The default delay is 1000ms. 488 488 489 -(% style=" background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true"height="15" role="presentation" title="Click and drag toove" width="15"]](% title="Clickanddrag to resize" %)326 +**(% style="color:#037691" %)AT Command: AT+SDELAY** 490 490 491 -(% style="color:#037691")**DownlinkCommand: 0xA1**328 +(% aria-label="image-20220613175511-8.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220613175511-8.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 492 492 330 +**(% style="color:#037691" %)Downlink Command: 0xA1** 331 + 493 493 Format: Command Code (0xA1) followed by 3 bytes time value. 494 494 495 495 If the downlink payload=A10007D0, it means set the sensor delay time to 0x0007D0=2000ms, while type code is A1. 496 496 497 -* Example 1: Downlink Payload: A10003E8 498 -* Example 2: Downlink Payload: A10007D0 336 +* Example 1: Downlink Payload: A10003E8 ~/~/ Set the sensor delay time = 1000ms 337 +* Example 2: Downlink Payload: A10007D0 ~/~/ Set the sensor delay time = 2000ms 499 499 500 -== 4.4 Query sensor model function == 501 501 502 502 503 -Feature: Using this function will re-update the model. 504 504 505 505 506 -(% style="color:#037691" %)**Downlink Command: 0xFA00** 507 507 344 +== 4.4 Query sensor model function == 508 508 509 - == 4.5 GetFirmwareVersionInfo==346 +Feature: Using this function will re-update the model. 510 510 348 +**(% style="color:#037691" %)Downlink Command: 0xFA00** 511 511 512 -Feature: use downlink to get firmware version. 513 513 351 +== 4.5 Get Firmware Version Info == 514 514 515 - (% style="color:#037691"%)**DownlinkCommand:0x26**353 +Feature: use downlink to get firmware version. 516 516 517 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %) 518 -|(% style="width:193px" %)**Downlink Control Type**|(% style="width:57px" %)**FPort**|(% style="width:91px" %)**Type Code**|(% style="width:149px" %)**Downlink payload size(bytes)** 519 -|(% style="width:193px" %)Get Firmware Version Info|(% style="width:57px" %)Any|(% style="width:91px" %)26|(% style="width:149px" %)2 355 +**(% style="color:#037691" %)Downlink Command: 0x26** 520 520 357 +(% aria-label="image-20220607171917-10.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/image-20220607171917-10.png?rev=1.1||alt="image-20220607171917-10.png" data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 358 + 521 521 * Reply to the confirmation package: 26 01 522 522 * Reply to non-confirmed packet: 26 00 523 523 ... ... @@ -525,16 +525,28 @@ 525 525 526 526 Configures info payload: 527 527 528 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %) 529 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:70px" %)**1**|(% style="width:70px" %)**1**|(% style="width:50px" %)**1**|(% style="width:70px" %)**2**|(% style="width:60px" %)**1**|(% style="width:50px" %)**4**|(% style="width:100px" %)**1** 530 -|(% style="width:93px" %)**Value**|(% style="width:114px" %)Software Type|(% style="width:139px" %)Frequency Band|(% style="width:149px" %)Sub-band|(% style="width:149px" %)Firmware Version|(% style="width:149px" %)Sensor Type|(% style="width:63px" %)Reserve|(% style="width:63px" %)Message Tpye Always 0x02 366 +(% border="1" cellspacing="8" style="background-color:#ffffcc; color:green; width:510px" %) 367 +|=(% style="width: 96px;" %)((( 368 +**Size(bytes)** 369 +)))|=(% style="width: 119px;" %)**1**|=(% style="width: 88px;" %)**1**|=(% style="width: 88px;" %)**1**|=(% style="width: 82px;" %)**2**|=(% style="width: 108px;" %)**1**|=(% style="width: 76px;" %)4|=(% style="width: 102px;" %)**1** 370 +|(% style="width:96px" %)**Value**|(% style="width:119px" %)Software Type|(% style="width:88px" %)((( 371 +Frequency 531 531 373 +Band 374 +)))|(% style="width:88px" %)Sub-band|(% style="width:82px" %)((( 375 +Firmware 532 532 533 -(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for GroPoint Air 377 +Version 378 +)))|(% style="width:108px" %)Sensor Type|(% style="width:76px" %)Reserve|(% style="width:102px" %)((( 379 +[[Message Type>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/#H2.3.6MessageType]] 380 +Always 0x02 381 +))) 534 534 383 +**(% style="color:#037691" %)Software Type**(%%): Always 0x03 for LLMS01 535 535 536 -(% style="color:#037691" %)**Frequency Band**(%%): 537 537 386 +**(% style="color:#037691" %)Frequency Band**(%%): 387 + 538 538 *0x01: EU868 539 539 540 540 *0x02: US915 ... ... @@ -557,15 +557,12 @@ 557 557 558 558 *0x0B: AS923-4 559 559 410 +**Sub-Band**: value 0x00 ~~ 0x08 560 560 561 - (% style="color:#037691" %)**Sub-Band**(%%):value0x00~~0x08412 +**Firmware Version**: 0x0100, Means: v1.0.0 version 562 562 414 +**Sensor Type**: 563 563 564 -(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version 565 - 566 - 567 -(% style="color:#037691" %)**Sensor Type**(%%): 568 - 569 569 0x01: LSE01 570 570 571 571 0x02: LDDS75 ... ... @@ -587,7 +587,6 @@ 587 587 588 588 == 5.1 Access AT Commands == 589 589 590 - 591 591 GroPoint Air supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to GroPoint Air for using AT command, as below. 592 592 593 593 (% aria-label="1654593668970-604.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:Main.User Manual for LoRaWAN End Nodes.LLMS01-LoRaWAN Leaf Moisture Sensor User Manual.WebHome@1654593668970-604.png||data-widget="image" height="297" width="474"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) ... ... @@ -601,28 +601,91 @@ 601 601 (% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD** 602 602 603 603 604 -((( 605 605 In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for GroPoint Air. GroPoint Air will output system info once power on as below: 606 -))) 607 607 608 608 (% aria-label="1654653659449-932.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:Main.User Manual for LoRaWAN End Nodes.LLMS01-LoRaWAN Leaf Moisture Sensor User Manual.WebHome@1654653659449-932.png||data-widget="image" height="471" width="674"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 609 609 610 -Valid AT Command please check [[Configure Device>>||anchor="H 4.A0ConfigureGroPointAirviaATCommandorLoRaWANDownlink"]].454 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLLMS01viaATCommandorLoRaWANDownlink"]]. 611 611 612 612 613 -= 6. PowerConsumption=457 += 6. Battery & How to replace = 614 614 459 +== 6.1 Battery Type == 615 615 616 -GroPoint Air usesER26500+SPC1520batteryk.See belowlinkfordetail information aboutthe battery infoandhowto replace.461 +GroPoint Air is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is an un-rechargeable battery with a low discharge rate targeting more than 5 years use. This type of battery is commonly used in IoT targets for long-term running, such as water meters. 617 617 618 - [[**BatteryInfo& PowerConsumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]].463 +The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance. 619 619 620 620 466 +(% aria-label="1654593587246-335.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/1654593587246-335.png?rev=1.1||alt="1654593587246-335.png" data-widget="image" height="408" width="574"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 467 + 468 +Minimum Working Voltage for the GroPoint Air: 469 + 470 +GroPoint Air: 2.45v ~~ 3.6v 471 + 472 + 473 +== 6.2 Power Consumption Analyze == 474 + 475 +Dragino Battery-powered products are all runs in Low Power mode. We have an updated battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit intervals. 476 + 477 +Instruction to use as below: 478 + 479 + 480 +**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]] 481 + 482 + 483 +**Step 2**: Open it and choose 484 + 485 +* ((( 486 +Product Model 487 +))) 488 +* ((( 489 +Uplink Interval 490 +))) 491 +* ((( 492 +Working Mode 493 +))) 494 + 495 +And the Life expectation in different cases will be shown on the right. 496 + 497 +(% aria-label="1654593605679-189.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/1654593605679-189.png?rev=1.1||alt="1654593605679-189.png" data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 498 + 499 +The battery-related documents as below: 500 + 501 +* ((( 502 +[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]], 503 +))) 504 +* ((( 505 +[[Lithium-Thionyl Chloride Battery datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]], 506 +))) 507 +* ((( 508 +[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]] 509 +))) 510 + 511 +(% aria-label="image-20220607172042-11.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/image-20220607172042-11.png?rev=1.1||alt="image-20220607172042-11.png" data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) 512 + 513 + 514 +=== 6.2.1 Battery Note === 515 + 516 +The Li-SICO battery is designed for small current / long period applications. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period to transmit LoRa, then the battery life may be decreased. 517 + 518 + 519 +=== 6.2.2 Replace the battery === 520 + 521 +((( 522 +You can change the battery in GroPoint Air. The type of battery is not limited as long as the output is between 3v to 3.6v. 523 +))) 524 + 525 +((( 526 +The default battery pack of GroPoint Air includes a ER26500 plus supercapacitor. If users can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most cases. The SPC can enlarge the battery life for high-frequency use (update period below 5 minutes). 527 +))) 528 + 529 + 530 + 621 621 = 7. FAQ = 622 622 623 623 == 7.1 How to change the LoRa Frequency Bands/Region == 624 624 625 - 626 626 You can follow the instruction here: [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome||anchor="H2.HardwareUpgradeMethodSupportList"]]. 627 627 When downloading the images, choose the required image file for download. 628 628 ... ... @@ -629,49 +629,45 @@ 629 629 630 630 = 8. Trouble Shooting = 631 631 632 -== 8.1 AT Commands input doesn 't work ==541 +== 8.1 AT Commands input doesn’t work == 633 633 543 +In case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while pressing the send key, user need to add ENTER in their string. 634 634 635 -In case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while pressing the send key, user need to add ENTER in their string. 636 636 637 - 638 638 == 8.2 Why i see the payload is 7FFF? == 639 639 640 - 641 641 The device will judge the length of the data received by the serial port. If the length of the received data is 0, it means that there is a problem with the sensor communication or the sensor is not connected properly, it is invalid data, and the uploaded data is 7FFF. 642 642 643 643 644 644 = 9. Order Info = 645 645 553 +Part Number: **GROPOINT AIR-M-XX** 646 646 647 - PartNumber:(% style="color:blue"%)**GROPOINT AIR-M-XX**555 +**XX**: The default frequency band 648 648 649 -(% style="color:blue" %)**XX**(%%): The default frequency band 557 +* **AS923**: LoRaWAN AS923 band 558 +* **AU915**: LoRaWAN AU915 band 559 +* **EU433**: LoRaWAN EU433 band 560 +* **EU868**: LoRaWAN EU868 band 561 +* **KR920**: LoRaWAN KR920 band 562 +* **US915**: LoRaWAN US915 band 563 +* **IN865**: LoRaWAN IN865 band 564 +* **CN470**: LoRaWAN CN470 band 650 650 651 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band 652 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band 653 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band 654 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band 655 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band 656 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band 657 -* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band 658 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band 659 - 566 +(% class="wikigeneratedid" id="H200BPackingInfo" %) 660 660 661 661 662 662 663 -= 10. Packing Info = 664 664 665 665 666 -((( 572 + 573 += 10. Packing Info = 574 + 667 667 **Package Includes: ** 668 -))) 669 669 670 670 * GroPoint Air-M x 1 671 671 672 -((( 673 673 **Dimension and weight:** 674 -))) 675 675 676 676 * Device Size: cm 677 677 * Device Weight: g
- image-20220625101917-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -7.6 KB - Content
- image-20230426084611-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -190.0 KB - Content