Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 85.1
edited by Saxer Lin
on 2023/07/15 11:46
Change comment: There is no comment for this version
To version 79.19
edited by Xiaoling
on 2023/06/13 15:52
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LDS12-LB -- LoRaWAN LiDAR ToF Distance Sensor User Manual
1 +DDS20-LB -- LoRaWAN Ultrasonic Liquid Level Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Xiaoling
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230614153353-1.png]]
2 +[[image:image-20230613133716-2.png||height="717" width="717"]]
3 3  
4 4  
5 5  
... ... @@ -7,6 +7,7 @@
7 7  
8 8  
9 9  
10 +
10 10  **Table of Contents：**
11 11  
12 12  {{toc/}}
... ... @@ -18,24 +18,24 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LoRaWAN LiDAR ToF Distance Sensor ==
22 +== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
22 22  
23 23  
24 -The Dragino LDS12-LB is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
25 +The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
25 25  
26 -The LDS12-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
27 +The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
27 27  
28 -It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
29 +DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
29 29  
30 -The LoRa wireless technology used in LDS12-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
31 +The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
31 31  
32 -LDS12-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
33 +DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
33 33  
34 -LDS12-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
35 +DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
35 35  
36 -Each LDS12-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37 +Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37 37  
38 -[[image:image-20230615152941-1.png||height="459" width="800"]]
39 +[[image:image-20230613140115-3.png||height="453" width="800"]]
39 39  
40 40  
41 41  == 1.2 ​Features ==
... ... @@ -44,17 +44,20 @@
44 44  * LoRaWAN 1.0.3 Class A
45 45  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
46 46  * Ultra-low power consumption
47 -* Laser technology for distance detection
48 -* Measure Distance: 0.1m~~12m @ 90% Reflectivity
49 -* Accuracy :  ±5cm@(0.1-6m), ±1%@(6m-12m)
50 -* Monitor Battery Level
48 +* Liquid Level Measurement by Ultrasonic technology
49 +* Measure through container, No need to contact Liquid
50 +* Valid level range 20mm - 2000mm
51 +* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
52 +* Cable Length : 25cm
51 51  * Support Bluetooth v5.1 and LoRaWAN remote configure
52 52  * Support wireless OTA update firmware
53 53  * AT Commands to change parameters
54 54  * Downlink to change configure
57 +* IP66 Waterproof Enclosure
55 55  * 8500mAh Battery for long term use
56 56  
57 57  
61 +
58 58  == 1.3 Specification ==
59 59  
60 60  
... ... @@ -63,23 +63,6 @@
63 63  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
64 64  * Operating Temperature: -40 ~~ 85°C
65 65  
66 -(% style="color:#037691" %)**Probe Specification:**
67 -
68 -* Storage temperature：-20℃~~75℃
69 -* Operating temperature : -20℃~~60℃
70 -* Measure Distance:
71 -** 0.1m ~~ 12m @ 90% Reflectivity
72 -** 0.1m ~~ 4m @ 10% Reflectivity
73 -* Accuracy : ±5cm@(0.1-6m), ±1%@(6m-12m)
74 -* Distance resolution : 5mm
75 -* Ambient light immunity : 70klux
76 -* Enclosure rating : IP65
77 -* Light source : LED
78 -* Central wavelength : 850nm
79 -* FOV : 3.6°
80 -* Material of enclosure : ABS+PC
81 -* Wire length : 25cm
82 -
83 83  (% style="color:#037691" %)**LoRa Spec:**
84 84  
85 85  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -101,296 +101,327 @@
101 101  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
102 102  
103 103  
104 -== 1.4 Applications ==
105 105  
92 +== 1.4 Suitable Container & Liquid ==
106 106  
107 -* Horizontal distance measurement
108 -* Parking management system
109 -* Object proximity and presence detection
110 -* Intelligent trash can management system
111 -* Robot obstacle avoidance
112 -* Automatic control
113 -* Sewer
114 114  
95 +* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
96 +* Container shape is regular, and surface is smooth.
97 +* Container Thickness:
98 +** Pure metal material.  2~~8mm, best is 3~~5mm
99 +** Pure non metal material: <10 mm
100 +* Pure liquid without irregular deposition.
115 115  
116 -(% style="display:none" %)
117 117  
118 -== 1.5 Sleep mode and working mode ==
119 119  
104 +(% style="display:none" %)
120 120  
121 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
106 +== 1.5 Install DDS20-LB ==
122 122  
123 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
124 124  
109 +(% style="color:blue" %)**Step 1**(%%):  ** Choose the installation point.**
125 125  
126 -== 1.6 Button & LEDs ==
111 +DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
127 127  
113 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
128 128  
129 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
130 130  
116 +(((
117 +(% style="color:blue" %)**Step 2**(%%):  **Polish the installation point.**
118 +)))
131 131  
132 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
133 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
134 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
135 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
136 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
120 +(((
121 +For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
137 137  )))
138 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
139 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
140 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
141 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
142 -)))
143 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
144 144  
124 +[[image:image-20230613143052-5.png]]
145 145  
146 -== 1.7 BLE connection ==
147 147  
127 +No polish needed if the container is shine metal surface without paint or non-metal container.
148 148  
149 -LDS12-LB support BLE remote configure.
129 +[[image:image-20230613143125-6.png]]
150 150  
151 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
152 152  
153 -* Press button to send an uplink
154 -* Press button to active device.
155 -* Device Power on or reset.
132 +(((
133 +(% style="color:blue" %)**Step3:   **(%%)**Test the installation point.**
134 +)))
156 156  
157 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
136 +(((
137 +Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
138 +)))
158 158  
140 +(((
141 +It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
142 +)))
159 159  
160 -== 1.8 Pin Definitions ==
144 +(((
145 +After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
146 +)))
161 161  
162 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WL03A-LB_LoRaWAN_None-Position_Rope_Type_Water_Leak_Controller_User_Manual/WebHome/image-20230613144156-1.png?rev=1.1||alt="image-20230613144156-1.png"]]
163 163  
149 +(((
150 +(% style="color:blue" %)**LED Status:**
151 +)))
164 164  
165 -== 1.9 Mechanical ==
153 +* (((
154 +**Onboard LED**: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
155 +)))
166 166  
157 +* (((
158 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
159 +)))
160 +* (((
161 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
162 +)))
167 167  
168 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
164 +(((
165 +LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
166 +)))
169 169  
170 170  
171 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
169 +(((
170 +(% style="color:red" %)**Note :**(%%)** (% style="color:blue" %)Ultrasonic coupling paste(%%)**(% style="color:blue" %) (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
171 +)))
172 172  
173 173  
174 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
174 +(((
175 +(% style="color:blue" %)**Step4:   **(%%)**Install use Epoxy ab glue.**
176 +)))
175 175  
178 +(((
179 +Prepare Eproxy AB glue.
180 +)))
176 176  
177 -(% style="color:blue" %)**Probe Mechanical:**
182 +(((
183 +Put Eproxy AB glue in the sensor and press it hard on the container installation point.
184 +)))
178 178  
186 +(((
187 +Reset DDS20-LB and see if the BLUE LED is slowly blinking.
188 +)))
179 179  
180 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654827224480-952.png?rev=1.1||alt="1654827224480-952.png"]]
190 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
181 181  
182 182  
183 -= 2. Configure LDS12-LB to connect to LoRaWAN network =
193 +(((
194 +(% style="color:red" %)**Note :**
184 184  
185 -== 2.1 How it works ==
196 +(% style="color:red" %)**1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
197 +)))
186 186  
199 +(((
200 +(% style="color:red" %)**2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
201 +)))
187 187  
188 -The LDS12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the LDS12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
189 189  
190 -(% style="display:none" %) (%%)
204 +== 1.6 Applications ==
191 191  
192 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
193 193  
207 +* Smart liquid control solution
194 194  
195 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
209 +* Smart liquefied gas solution
196 196  
197 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
198 198  
199 -[[image:image-20230615153004-2.png||height="459" width="800"]](% style="display:none" %)
200 200  
213 +== 1.7 Precautions ==
201 201  
202 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from LDS12-LB.
203 203  
204 -Each LDS12-LB is shipped with a sticker with the default device EUI as below:
216 +* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
205 205  
206 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
218 +* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
207 207  
220 +* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.
208 208  
209 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
210 210  
223 +(% style="display:none" %)
211 211  
212 -(% style="color:blue" %)**Register the device**
225 +== 1.8 Sleep mode and working mode ==
213 213  
214 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
215 215  
228 +(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
216 216  
217 -(% style="color:blue" %)**Add APP EUI and DEV EUI**
230 +(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
218 218  
219 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
220 220  
233 +== 1.9 Button & LEDs ==
221 221  
222 -(% style="color:blue" %)**Add APP EUI in the application**
223 223  
236 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
224 224  
225 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
226 226  
239 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
240 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
241 +|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
242 +If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
243 +Meanwhile, BLE module will be active and user can connect via BLE to configure device.
244 +)))
245 +|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
246 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
247 +(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
248 +Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
249 +)))
250 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
227 227  
228 -(% style="color:blue" %)**Add APP KEY**
229 229  
230 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
231 231  
254 +== 1.10 BLE connection ==
232 232  
233 -(% style="color:blue" %)**Step 2:**(%%) Activate on LDS12-LB
234 234  
257 +DDS20-LB support BLE remote configure.
235 235  
236 -Press the button for 5 seconds to activate the LDS12-LB.
259 +BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
237 237  
238 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
261 +* Press button to send an uplink
262 +* Press button to active device.
263 +* Device Power on or reset.
239 239  
240 -After join success, it will start to upload messages to TTN and you can see the messages in the panel.
265 +If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
241 241  
242 242  
243 -== 2.3 ​Uplink Payload ==
268 +== 1.11 Pin Definitions ==
244 244  
270 +[[image:image-20230523174230-1.png]]
245 245  
246 -=== 2.3.1 Device Status, FPORT~=5 ===
247 247  
248 -Users can use the downlink command(**0x26 01**) to ask LDS12-LB to send device configure detail, include device configure status. LDS12-LB will uplink a payload via FPort=5 to server.
273 +== 1.12 Mechanical ==
249 249  
250 -The Payload format is as below.
251 251  
252 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:529px" %)
253 -|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)(((
254 -**Size(bytes)**
255 -)))|=(% style="width: 110px; background-color: rgb(79, 129, 189); color: white;" %)**1**|=(% style="width: 48px; background-color: rgb(79, 129, 189); color: white;" %)**2**|=(% style="background-color: rgb(79, 129, 189); color: white; width: 94px;" %)**1**|=(% style="background-color: rgb(79, 129, 189); color: white; width: 91px;" %)**1**|=(% style="background-color: rgb(79, 129, 189); color: white; width: 60px;" %)**2**
256 -|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
276 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
257 257  
258 -Example parse in TTNv3
259 259  
260 -**Sensor Model**: For LDS12-LB, this value is 0x24
279 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
261 261  
262 -**Firmware Version**: 0x0100, Means: v1.0.0 version
263 263  
264 -**Frequency Band**:
282 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
265 265  
266 -0x01: EU868
267 267  
268 -0x02: US915
285 +(% style="color:blue" %)**Probe Mechanical:**
269 269  
270 -0x03: IN865
287 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
271 271  
272 -0x04: AU915
273 273  
274 -0x05: KZ865
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
275 275  
276 -0x06: RU864
277 277  
278 -0x07: AS923
293 += 2. Configure DDS20-LB to connect to LoRaWAN network =
279 279  
280 -0x08: AS923-1
295 +== 2.1 How it works ==
281 281  
282 -0x09: AS923-2
283 283  
284 -0x0a: AS923-3
298 +The DDS20-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS20-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
285 285  
286 -0x0b: CN470
300 +(% style="display:none" %) (%%)
287 287  
288 -0x0c: EU433
302 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
289 289  
290 -0x0d: KR920
291 291  
292 -0x0e: MA869
305 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
293 293  
294 -**Sub-Band**:
307 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
295 295  
296 -AU915 and US915:value 0x00 ~~ 0x08
309 +[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
297 297  
298 -CN470: value 0x0B ~~ 0x0C
299 299  
300 -Other Bands: Always 0x00
312 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS20-LB.
301 301  
302 -**Battery Info**:
314 +Each DDS20-LB is shipped with a sticker with the default device EUI as below:
303 303  
304 -Check the battery voltage.
316 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
305 305  
306 -Ex1: 0x0B45 = 2885mV
307 307  
308 -Ex2: 0x0B49 = 2889mV
319 +You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
309 309  
310 310  
311 -=== 2.3.2 Device Status, FPORT~=5 ===
322 +(% style="color:blue" %)**Register the device**
312 312  
313 -(((
314 -LDS12-LB will uplink payload via LoRaWAN with below payload format: 
315 -)))
324 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
316 316  
317 -(((
318 -Uplink payload includes in total 11 bytes.
319 -)))
320 320  
321 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:670px" %)
322 -|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)(((
323 -**Size(bytes)**
324 -)))|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color: rgb(79, 129, 189); color: white; width: 122px;" %)**1**|=(% style="background-color: rgb(79, 129, 189); color: white; width: 54px;" %)**1**|=(% style="background-color: rgb(79, 129, 189); color: white; width: 96px;" %)**1**
325 -|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
326 -[[Temperature DS18B20>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
327 -)))|[[Distance>>||anchor="H2.3.3Distance"]]|[[Distance signal strength>>||anchor="H2.3.4Distancesignalstrength"]]|(% style="width:122px" %)(((
328 -[[Interrupt flag>>||anchor="H2.3.5InterruptPin"]]
327 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
329 329  
330 -&
329 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
331 331  
332 -[[Interrupt_level>>||anchor="H2.3.5InterruptPin"]]
333 -)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="H2.3.6LiDARtemp"]]|(% style="width:96px" %)(((
334 -[[Message Type>>||anchor="H2.3.7MessageType"]]
335 -)))
336 336  
337 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654833689380-972.png?rev=1.1||alt="1654833689380-972.png"]]
332 +(% style="color:blue" %)**Add APP EUI in the application**
338 338  
339 339  
340 -=== 2.3.2.a Battery Info ===
335 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
341 341  
342 342  
343 -Check the battery voltage for LDS12-LB.
338 +(% style="color:blue" %)**Add APP KEY**
344 344  
345 -Ex1: 0x0B45 = 2885mV
340 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
346 346  
347 -Ex2: 0x0B49 = 2889mV
348 348  
343 +(% style="color:blue" %)**Step 2:**(%%) Activate on DDS20-LB
349 349  
350 -=== 2.3.2.b DS18B20 Temperature sensor ===
351 351  
346 +Press the button for 5 seconds to activate the DDS20-LB.
352 352  
353 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
348 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
354 354  
350 +After join success, it will start to upload messages to TTN and you can see the messages in the panel.
355 355  
356 -**Example**:
357 357  
358 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
353 +== 2.3  ​Uplink Payload ==
359 359  
360 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
361 361  
356 +(((
357 +DDS20-LB will uplink payload via LoRaWAN with below payload format: 
358 +)))
362 362  
363 -=== 2.3.2.c Distance ===
360 +(((
361 +Uplink payload includes in total 8 bytes.
362 +)))
364 364  
364 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
365 +|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
366 +**Size(bytes)**
367 +)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
368 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
369 +[[Distance>>||anchor="H2.3.2A0Distance"]]
370 +(unit: mm)
371 +)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
372 +[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
373 +)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
365 365  
366 -Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
375 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
367 367  
368 368  
369 -**Example**:
378 +=== 2.3.1  Battery Info ===
370 370  
371 -If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
372 372  
381 +Check the battery voltage for DDS20-LB.
373 373  
374 -=== 2.3.2.d Distance signal strength ===
383 +Ex1: 0x0B45 = 2885mV
375 375  
385 +Ex2: 0x0B49 = 2889mV
376 376  
377 -Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
378 378  
388 +=== 2.3.2  Distance ===
379 379  
380 -**Example**:
381 381  
382 -If payload is: 01D7(H)=471(D), distance signal strength=471, 471>100,471≠65535, the measured value of Dist is considered credible.
391 +(((
392 +Get the distance. Flat object range 20mm - 2000mm.
393 +)))
383 383  
384 -Customers can judge whether they need to adjust the environment based on the signal strength.
395 +(((
396 +For example, if the data you get from the register is **0x06 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
385 385  
398 +(% style="color:blue" %)**0605(H) = 1541 (D) = 1541 mm.**
399 +)))
386 386  
387 -=== 2.3.2.e Interrupt Pin & Interrupt Level ===
401 +* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
388 388  
403 +* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
389 389  
390 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
391 391  
392 -Note: The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>||anchor="H1.8PinDefinitions"]].
393 393  
407 +=== 2.3.3  Interrupt Pin ===
408 +
409 +
410 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
411 +
394 394  **Example:**
395 395  
396 396  0x00: Normal uplink packet.
... ... @@ -398,59 +398,53 @@
398 398  0x01: Interrupt Uplink Packet.
399 399  
400 400  
401 -=== 2.3.2.f LiDAR temp ===
419 +=== 2.3.4  DS18B20 Temperature sensor ===
402 402  
403 403  
404 -Characterize the internal temperature value of the sensor.
422 +This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
405 405  
406 -**Example: **
407 -If payload is: 1C(H) <<24>>24=28(D),LiDAR temp=28℃.
408 -If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
424 +**Example**:
409 409  
426 +If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
410 410  
411 -=== 2.3.2.g Message Type ===
428 +If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
412 412  
413 413  
431 +=== 2.3.5  Sensor Flag ===
432 +
433 +
414 414  (((
415 -For a normal uplink payload, the message type is always 0x01.
435 +0x01: Detect Ultrasonic Sensor
416 416  )))
417 417  
418 418  (((
419 -Valid Message Type:
439 +0x00: No Ultrasonic Sensor
420 420  )))
421 421  
422 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
423 -|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
424 -|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
425 -|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.ConfigureLDS12-LB"]]
426 426  
443 +=== 2.3.6  Decode payload in The Things Network ===
427 427  
428 -=== 2.3.8 Decode payload in The Things Network ===
429 429  
430 -
431 431  While using TTN network, you can add the payload format to decode the payload.
432 432  
433 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
448 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
434 434  
450 +The payload decoder function for TTN V3 is here:
435 435  
436 436  (((
437 -The payload decoder function for TTN is here:
453 +DDS20-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
438 438  )))
439 439  
440 -(((
441 -LDS12-LB TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
442 -)))
443 443  
457 +== 2.4  Uplink Interval ==
444 444  
445 -== 2.4 Uplink Interval ==
446 446  
460 +The DDS20-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
447 447  
448 -The LDS12-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
449 449  
463 +== 2.5  ​Show Data in DataCake IoT Server ==
450 450  
451 -== 2.5 ​Show Data in DataCake IoT Server ==
452 452  
453 -
454 454  (((
455 455  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
456 456  )))
... ... @@ -473,7 +473,7 @@
473 473  
474 474  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
475 475  
476 -(% style="color:blue" %)**Step 4**(%%)**: Search the LDS12-LB and add DevEUI.**
488 +(% style="color:blue" %)**Step 4**(%%)**: Search the DDS20-LB and add DevEUI.**
477 477  
478 478  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
479 479  
... ... @@ -486,19 +486,19 @@
486 486  == 2.6 Datalog Feature ==
487 487  
488 488  
489 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LDS12-LB will store the reading for future retrieving purposes.
501 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS20-LB will store the reading for future retrieving purposes.
490 490  
491 491  
492 492  === 2.6.1 Ways to get datalog via LoRaWAN ===
493 493  
494 494  
495 -Set PNACKMD=1, LDS12-LB will wait for ACK for every uplink, when there is no LoRaWAN network,LDS12-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
507 +Set PNACKMD=1, DDS20-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS20-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
496 496  
497 497  * (((
498 -a) LDS12-LB will do an ACK check for data records sending to make sure every data arrive server.
510 +a) DDS20-LB will do an ACK check for data records sending to make sure every data arrive server.
499 499  )))
500 500  * (((
501 -b) LDS12-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but LDS12-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if LDS12-LB gets a ACK, LDS12-LB will consider there is a network connection and resend all NONE-ACK messages.
513 +b) DDS20-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS20-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS20-LB gets a ACK, DDS20-LB will consider there is a network connection and resend all NONE-ACK messages.
502 502  )))
503 503  
504 504  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -509,7 +509,7 @@
509 509  === 2.6.2 Unix TimeStamp ===
510 510  
511 511  
512 -LDS12-LB uses Unix TimeStamp format based on
524 +DDS20-LB uses Unix TimeStamp format based on
513 513  
514 514  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
515 515  
... ... @@ -528,7 +528,7 @@
528 528  
529 529  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
530 530  
531 -Once LDS12-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LDS12-LB. If LDS12-LB fails to get the time from the server, LDS12-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
543 +Once DDS20-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS20-LB. If DDS20-LB fails to get the time from the server, DDS20-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
532 532  
533 533  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
534 534  
... ... @@ -556,7 +556,7 @@
556 556  )))
557 557  
558 558  (((
559 -Uplink Internal =5s，means LDS12-LB will send one packet every 5s. range 5~~255s.
571 +Uplink Internal =5s，means DDS20-LB will send one packet every 5s. range 5~~255s.
560 560  )))
561 561  
562 562  
... ... @@ -563,103 +563,17 @@
563 563  == 2.7 Frequency Plans ==
564 564  
565 565  
566 -The LDS12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
578 +The DDS20-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
567 567  
568 568  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
569 569  
570 570  
571 -== 2.8 LiDAR ToF Measurement ==
583 += 3. Configure DDS20-LB =
572 572  
573 -=== 2.8.1 Principle of Distance Measurement ===
574 -
575 -
576 -The LiDAR probe is based on TOF, namely, Time of Flight principle. To be specific, the product emits modulation wave of near infrared ray on a periodic basis, which will be reflected after contacting object. The product obtains the time of flight by measuring round-trip phase difference and then calculates relative range between the product and the detection object, as shown below.
577 -
578 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831757579-263.png?rev=1.1||alt="1654831757579-263.png"]]
579 -
580 -
581 -=== 2.8.2 Distance Measurement Characteristics ===
582 -
583 -
584 -With optimization of light path and algorithm, The LiDAR probe has minimized influence from external environment on distance measurement performance. Despite that, the range of distance measurement may still be affected by the environment illumination intensity and the reflectivity of detection object. As shown in below:
585 -
586 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831774373-275.png?rev=1.1||alt="1654831774373-275.png"]]
587 -
588 -
589 -(((
590 -(% style="color:blue" %)**① **(%%)Represents the detection blind zone of The LiDAR probe, 0-10cm, within which the output data is unreliable.
591 -)))
592 -
593 -(((
594 -(% style="color:blue" %)**② **(%%)Represents the operating range of The LiDAR probe detecting black target with 10% reflectivity, 0.1-5m.
595 -)))
596 -
597 -(((
598 -(% style="color:blue" %)**③ **(%%)Represents the operating range of The LiDAR probe detecting white target with 90% reflectivity, 0.1-12m.
599 -)))
600 -
601 -
602 -(((
603 -Vertical Coordinates: Represents the radius of light spot for The LiDAR probe at different distances. The diameter of light spot depends on the FOV of The LiDAR probe (the term of FOV generally refers to the smaller value between the receiving angle and the transmitting angle), which is calculated as follows:
604 -)))
605 -
606 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831797521-720.png?rev=1.1||alt="1654831797521-720.png"]]
607 -
608 -(((
609 -In the formula above, d is the diameter of light spot; D is detecting range; β is the value of the receiving angle of The LiDAR probe, 3.6°. Correspondence between the diameter of light spot and detecting range is given in Table below.
610 -)))
611 -
612 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831810009-716.png?rev=1.1||alt="1654831810009-716.png"]]
613 -
614 -(((
615 -If the light spot reaches two objects with different distances, as shown in Figure 3, the output distance value will be a value between the actual distance values of the two objects. For a high accuracy requirement in practice, the above situation should be noticed to avoid the measurement error.
616 -)))
617 -
618 -
619 -=== 2.8.3 Notice of usage ===
620 -
621 -
622 -Possible invalid /wrong reading for LiDAR ToF tech:
623 -
624 -* Measure high reflectivity object such as: Mirror, Smooth ceramic tile, static milk surface, will have possible wrong readings.
625 -* While there is transparent object such as glass, water drop between the measured object and the LiDAR sensor, the reading might be wrong.
626 -* The LiDAR probe is cover by dirty things; the reading might be wrong. In this case, need to clean the probe.
627 -* The sensor window is made by Acrylic. Don't touch it with alcohol material. This will destroy the sensor window.
628 -
629 -
630 -=== 2.8.4  Reflectivity of different objects ===
631 -
632 -
633 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:379px" %)
634 -|=(% style="width: 54px;background-color:#4F81BD;color:white" %)Item|=(% style="width: 231px;background-color:#4F81BD;color:white" %)Material|=(% style="width: 94px;background-color:#4F81BD;color:white" %)Relectivity
635 -|(% style="width:53px" %)1|(% style="width:229px" %)Black foam rubber|(% style="width:93px" %)2.4%
636 -|(% style="width:53px" %)2|(% style="width:229px" %)Black fabric|(% style="width:93px" %)3%
637 -|(% style="width:53px" %)3|(% style="width:229px" %)Black rubber|(% style="width:93px" %)4%
638 -|(% style="width:53px" %)4|(% style="width:229px" %)Coal (different types of coal)|(% style="width:93px" %)4~~8%
639 -|(% style="width:53px" %)5|(% style="width:229px" %)Black car paint|(% style="width:93px" %)5%
640 -|(% style="width:53px" %)6|(% style="width:229px" %)Black Jam|(% style="width:93px" %)10%
641 -|(% style="width:53px" %)7|(% style="width:229px" %)Opaque black plastic|(% style="width:93px" %)14%
642 -|(% style="width:53px" %)8|(% style="width:229px" %)Clean rough board|(% style="width:93px" %)20%
643 -|(% style="width:53px" %)9|(% style="width:229px" %)Translucent plastic bottle|(% style="width:93px" %)62%
644 -|(% style="width:53px" %)10|(% style="width:229px" %)Carton cardboard|(% style="width:93px" %)68%
645 -|(% style="width:53px" %)11|(% style="width:229px" %)Clean pine|(% style="width:93px" %)70%
646 -|(% style="width:53px" %)12|(% style="width:229px" %)Opaque white plastic|(% style="width:93px" %)87%
647 -|(% style="width:53px" %)13|(% style="width:229px" %)White Jam|(% style="width:93px" %)90%
648 -|(% style="width:53px" %)14|(% style="width:229px" %)Kodak Standard Whiteboard|(% style="width:93px" %)100%
649 -|(% style="width:53px" %)15|(% style="width:229px" %)(((
650 -Unpolished white metal surface
651 -)))|(% style="width:93px" %)130%
652 -|(% style="width:53px" %)16|(% style="width:229px" %)Glossy light metal surface|(% style="width:93px" %)150%
653 -|(% style="width:53px" %)17|(% style="width:229px" %)stainless steel|(% style="width:93px" %)200%
654 -|(% style="width:53px" %)18|(% style="width:229px" %)Reflector plate, reflective tape|(% style="width:93px" %)>300%
655 -
656 -
657 -= 3. Configure LDS12-LB =
658 -
659 659  == 3.1 Configure Methods ==
660 660  
661 661  
662 -LDS12-LB supports below configure method:
588 +DDS20-LB supports below configure method:
663 663  
664 664  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
665 665  
... ... @@ -668,6 +668,7 @@
668 668  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
669 669  
670 670  
597 +
671 671  == 3.2 General Commands ==
672 672  
673 673  
... ... @@ -682,10 +682,10 @@
682 682  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
683 683  
684 684  
685 -== 3.3 Commands special design for LDS12-LB ==
612 +== 3.3 Commands special design for DDS20-LB ==
686 686  
687 687  
688 -These commands only valid for LDS12-LB, as below:
615 +These commands only valid for DDS20-LB, as below:
689 689  
690 690  
691 691  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -700,7 +700,7 @@
700 700  )))
701 701  
702 702  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
703 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
630 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
704 704  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
705 705  30000
706 706  OK
... ... @@ -743,7 +743,7 @@
743 743  (% style="color:blue" %)**AT Command: AT+INTMOD**
744 744  
745 745  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
746 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
673 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
747 747  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
748 748  0
749 749  OK
... ... @@ -768,87 +768,11 @@
768 768  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
769 769  
770 770  
771 -=== 3.3.3 Get Firmware Version Info ===
772 772  
773 -
774 -Feature: use downlink to get firmware version.
775 -
776 -(% style="color:blue" %)**Downlink Command: 0x26**
777 -
778 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:492px" %)
779 -|(% style="background-color:#4f81bd; color:white; width:191px" %)**Downlink Control Type**|(% style="background-color:#4f81bd; color:white; width:57px" %)**FPort**|(% style="background-color:#4f81bd; color:white; width:91px" %)**Type Code**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Downlink payload size(bytes)**
780 -|(% style="width:191px" %)Get Firmware Version Info|(% style="width:57px" %)Any|(% style="width:91px" %)26|(% style="width:151px" %)2
781 -
782 -* Reply to the confirmation package: 26 01
783 -* Reply to non-confirmed packet: 26 00
784 -
785 -Device will send an uplink after got this downlink command. With below payload:
786 -
787 -Configures info payload:
788 -
789 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
790 -|=(% style="background-color:#4F81BD;color:white" %)(((
791 -**Size(bytes)**
792 -)))|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**5**|=(% style="background-color:#4F81BD;color:white" %)**1**
793 -|**Value**|Software Type|(((
794 -Frequency Band
795 -)))|Sub-band|(((
796 -Firmware Version
797 -)))|Sensor Type|Reserve|(((
798 -[[Message Type>>||anchor="H2.3.7MessageType"]]
799 -Always 0x02
800 -)))
801 -
802 -(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LLDS12
803 -
804 -(% style="color:#037691" %)**Frequency Band**:
805 -
806 -0x01: EU868
807 -
808 -0x02: US915
809 -
810 -0x03: IN865
811 -
812 -0x04: AU915
813 -
814 -0x05: KZ865
815 -
816 -0x06: RU864
817 -
818 -0x07: AS923
819 -
820 -0x08: AS923-1
821 -
822 -0x09: AS923-2
823 -
824 -0xa0: AS923-3
825 -
826 -
827 -(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
828 -
829 -(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
830 -
831 -(% style="color:#037691" %)**Sensor Type**:
832 -
833 -0x01: LSE01
834 -
835 -0x02: LDDS75
836 -
837 -0x03: LDDS20
838 -
839 -0x04: LLMS01
840 -
841 -0x05: LSPH01
842 -
843 -0x06: LSNPK01
844 -
845 -0x07: LLDS12
846 -
847 -
848 848  = 4. Battery & Power Consumption =
849 849  
850 850  
851 -LDS12-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
702 +DDS20-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
852 852  
853 853  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
854 854  
... ... @@ -857,7 +857,7 @@
857 857  
858 858  
859 859  (% class="wikigeneratedid" %)
860 -User can change firmware LDS12-LB to:
711 +User can change firmware DDS20-LB to:
861 861  
862 862  * Change Frequency band/ region.
863 863  
... ... @@ -865,7 +865,7 @@
865 865  
866 866  * Fix bugs.
867 867  
868 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/w1p7ukjrx49e62r/AAB3uCNCt-koYUvMkZUPBRSca?dl=0]]**
719 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
869 869  
870 870  Methods to Update Firmware:
871 871  
... ... @@ -874,40 +874,42 @@
874 874  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
875 875  
876 876  
728 +
877 877  = 6. FAQ =
878 878  
879 -== 6.1 What is the frequency plan for LDS12-LB? ==
731 +== 6.1  What is the frequency plan for DDS20-LB? ==
880 880  
881 881  
882 -LDS12-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
734 +DDS20-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
883 883  
884 884  
885 -= 7. Trouble Shooting =
737 +== 6.2  Can I use DDS20-LB in condensation environment? ==
886 886  
887 -== 7.1 AT Command input doesn't work ==
888 888  
740 +DDS20-LB is not suitable to be used in condensation environment. Condensation on the DDS20-LB probe will affect the reading and always got 0.
889 889  
890 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
891 891  
743 += 7.  Trouble Shooting =
892 892  
893 -== 7.2 Significant error between the output distant value of LiDAR and actual distance ==
745 +== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
894 894  
895 895  
896 -(((
897 -(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
898 -)))
748 +It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
899 899  
900 -(((
901 -(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
902 -)))
903 903  
751 +== 7.2  AT Command input doesn't work ==
904 904  
905 -(((
906 -(% style="color:blue" %)**Cause ②**(%%)**: **The IR-pass filters are blocked.
907 -)))
908 908  
754 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
755 +
756 +
757 +== 7.3  Why i always see 0x0000 or 0 for the distance value? ==
758 +
759 +
909 909  (((
910 -(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
761 +LDDS20 has a strict [[**installation requirement**>>||anchor="H1.5A0InstallDDS20-LB"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.
762 +
763 +If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.
911 911  )))
912 912  
913 913  
... ... @@ -914,7 +914,7 @@
914 914  = 8. Order Info =
915 915  
916 916  
917 -Part Number: (% style="color:blue" %)**LDS12-LB-XXX**
770 +Part Number: (% style="color:blue" %)**DDS20-LB-XXX**
918 918  
919 919  (% style="color:red" %)**XXX**(%%): **The default frequency band**
920 920  
... ... @@ -935,12 +935,13 @@
935 935  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
936 936  
937 937  
791 +
938 938  = 9. ​Packing Info =
939 939  
940 940  
941 941  (% style="color:#037691" %)**Package Includes**:
942 942  
943 -* LDS12-LB LoRaWAN LiDAR ToF Distance Sensor x 1
797 +* DDS20-LB LoRaWAN Ultrasonic Liquid Level Sensor x 1
944 944  
945 945  (% style="color:#037691" %)**Dimension and weight**:
946 946  
... ... @@ -953,6 +953,7 @@
953 953  * Weight / pcs : g
954 954  
955 955  
810 +
956 956  = 10. Support =
957 957  
958 958  
image-20230614153353-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.1 KB
Content
image-20230614162334-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -88.3 KB
Content
image-20230614162359-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -88.3 KB
Content
image-20230615152941-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.9 KB
Content
image-20230615153004-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.9 KB
Content