Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 82.19
edited by Xiaoling
on 2023/06/14 17:18
Change comment: There is no comment for this version
To version 124.1
edited by Xiaoling
on 2023/11/28 15:11
Change comment: Uploaded new attachment "image-20231128151132-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LDS12-LB -- LoRaWAN LiDAR ToF Distance Sensor User Manual
1 +DS20L -- LoRaWAN Smart Distance Detector User Manual
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230614153353-1.png]]
2 +[[image:image-20231110085342-2.png||height="481" width="481"]]
3 3  
4 4  
5 5  
... ... @@ -7,6 +7,7 @@
7 7  
8 8  
9 9  
10 +
10 10  **Table of Contents：**
11 11  
12 12  {{toc/}}
... ... @@ -18,172 +18,66 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LoRaWAN LiDAR ToF Distance Sensor ==
22 +== 1.1 What is LoRaWAN Smart Distance Detector ==
22 22  
23 23  
24 -The Dragino LDS12-LB is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
25 +The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN. DS20L can measure range between 3cm ~~ 200cm.
25 25  
26 -The LDS12-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
27 +DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current 
28 +consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
27 27  
28 -It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
30 +DS20L has a (% style="color:blue" %)**built-in 2400mAh non-chargeable battery**(%%) for long-term use up to several years*. Users can also power DS20L with an external power source for (% style="color:blue" %)**continuous measuring and distance alarm / counting purposes.**
29 29  
30 -The LoRa wireless technology used in LDS12-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 +DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
31 31  
32 -LDS12-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
33 33  
34 -LDS12-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
35 +[[image:image-20231110102635-5.png||height="402" width="807"]]
35 35  
36 -Each LDS12-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37 37  
38 -[[image:image-20230614162334-2.png||height="468" width="800"]]
39 -
40 -
41 41  == 1.2 ​Features ==
42 42  
43 43  
44 -* LoRaWAN 1.0.3 Class A
45 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
46 -* Ultra-low power consumption
47 -* Laser technology for distance detection
48 -* Measure Distance: 0.1m~~12m @ 90% Reflectivity
49 -* Accuracy :  ±5cm@(0.1-6m), ±1%@(6m-12m)
50 -* Monitor Battery Level
51 -* Support Bluetooth v5.1 and LoRaWAN remote configure
52 -* Support wireless OTA update firmware
41 +* LoRaWAN Class A protocol
42 +* LiDAR distance detector, range 3 ~~ 200cm
43 +* Periodically detect or continuously detect mode
53 53  * AT Commands to change parameters
54 -* Downlink to change configure
55 -* 8500mAh Battery for long term use
45 +* Remotely configure parameters via LoRaWAN Downlink
46 +* Alarm & Counting mode
47 +* Firmware upgradable via program port or LoRa protocol
48 +* Built-in 2400mAh battery or power by external power source
56 56  
57 57  == 1.3 Specification ==
58 58  
59 59  
60 -(% style="color:#037691" %)**Common DC Characteristics:**
53 +(% style="color:#037691" %)**LiDAR Sensor:**
61 61  
62 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
63 -* Operating Temperature: -40 ~~ 85°C
55 +* Operation Temperature: -40 ~~ 80 °C
56 +* Operation Humidity: 0~~99.9%RH (no Dew)
57 +* Storage Temperature: -10 ~~ 45°C
58 +* Measure Range: 3cm~~200cm @ 90% reflectivity
59 +* Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
60 +* ToF FoV: ±9°, Total 18°
61 +* Light source: VCSEL
64 64  
65 -(% style="color:#037691" %)**Probe Specification:**
63 +== 1.4 Power Consumption ==
66 66  
67 -* Storage temperature：-20℃~~75℃
68 -* Operating temperature : -20℃~~60℃
69 -* Measure Distance:
70 -** 0.1m ~~ 12m @ 90% Reflectivity
71 -** 0.1m ~~ 4m @ 10% Reflectivity
72 -* Accuracy : ±5cm@(0.1-6m), ±1%@(6m-12m)
73 -* Distance resolution : 5mm
74 -* Ambient light immunity : 70klux
75 -* Enclosure rating : IP65
76 -* Light source : LED
77 -* Central wavelength : 850nm
78 -* FOV : 3.6°
79 -* Material of enclosure : ABS+PC
80 -* Wire length : 25cm
81 81  
82 -(% style="color:#037691" %)**LoRa Spec:**
66 +(% style="color:#037691" %)**Battery Power Mode:**
83 83  
84 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
85 -* Max +22 dBm constant RF output vs.
86 -* RX sensitivity: down to -139 dBm.
87 -* Excellent blocking immunity
68 +* Idle: 0.003 mA @ 3.3v
69 +* Max : 360 mA
88 88  
89 -(% style="color:#037691" %)**Battery:**
71 +(% style="color:#037691" %)**Continuously mode**:
90 90  
91 -* Li/SOCI2 un-chargeable battery
92 -* Capacity: 8500mAh
93 -* Self-Discharge: <1% / Year @ 25°C
94 -* Max continuously current: 130mA
95 -* Max boost current: 2A, 1 second
73 +* Idle: 21 mA @ 3.3v
74 +* Max : 360 mA
96 96  
97 -(% style="color:#037691" %)**Power Consumption**
76 += 2. Configure DS20L to connect to LoRaWAN network =
98 98  
99 -* Sleep Mode: 5uA @ 3.3v
100 -* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
101 -
102 -== 1.4 Applications ==
103 -
104 -
105 -* Horizontal distance measurement
106 -* Parking management system
107 -* Object proximity and presence detection
108 -* Intelligent trash can management system
109 -* Robot obstacle avoidance
110 -* Automatic control
111 -* Sewer
112 -
113 -(% style="display:none" %)
114 -
115 -== 1.5 Sleep mode and working mode ==
116 -
117 -
118 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
119 -
120 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
121 -
122 -
123 -== 1.6 Button & LEDs ==
124 -
125 -
126 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
127 -
128 -
129 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
130 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
131 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
132 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
133 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
134 -)))
135 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
136 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
137 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
138 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
139 -)))
140 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
141 -
142 -== 1.7 BLE connection ==
143 -
144 -
145 -LDS12-LB support BLE remote configure.
146 -
147 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
148 -
149 -* Press button to send an uplink
150 -* Press button to active device.
151 -* Device Power on or reset.
152 -
153 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
154 -
155 -
156 -== 1.8 Pin Definitions ==
157 -
158 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WL03A-LB_LoRaWAN_None-Position_Rope_Type_Water_Leak_Controller_User_Manual/WebHome/image-20230613144156-1.png?rev=1.1||alt="image-20230613144156-1.png"]]
159 -
160 -
161 -
162 -== 1.9 Mechanical ==
163 -
164 -
165 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
166 -
167 -
168 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
169 -
170 -
171 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
172 -
173 -
174 -(% style="color:blue" %)**Probe Mechanical:**
175 -
176 -
177 -
178 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654827224480-952.png?rev=1.1||alt="1654827224480-952.png"]]
179 -
180 -
181 -= 2. Configure LDS12-LB to connect to LoRaWAN network =
182 -
183 183  == 2.1 How it works ==
184 184  
185 185  
186 -The LDS12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the LDS12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
81 +The DS20L is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS20L. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
187 187  
188 188  (% style="display:none" %) (%%)
189 189  
... ... @@ -192,15 +192,14 @@
192 192  
193 193  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
194 194  
195 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
90 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.(% style="display:none" %)
196 196  
197 -[[image:image-20230614162359-3.png||height="468" width="800"]](% style="display:none" %)
92 +[[image:image-20231110102635-5.png||height="402" width="807"]](% style="display:none" %)
198 198  
94 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS20L.
199 199  
200 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from LDS12-LB.
96 +Each DS20L is shipped with a sticker with the default device EUI as below:
201 201  
202 -Each LDS12-LB is shipped with a sticker with the default device EUI as below:
203 -
204 204  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
205 205  
206 206  
... ... @@ -228,10 +228,11 @@
228 228  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
229 229  
230 230  
231 -(% style="color:blue" %)**Step 2:**(%%) Activate on LDS12-LB
125 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS20L
232 232  
127 +[[image:image-20231128133704-1.png||height="189" width="441"]]
233 233  
234 -Press the button for 5 seconds to activate the LDS12-LB.
129 +Press the button for 5 seconds to activate the DS20L.
235 235  
236 236  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
237 237  
... ... @@ -240,359 +240,354 @@
240 240  
241 241  == 2.3 ​Uplink Payload ==
242 242  
138 +=== 2.3.1 Device Status, FPORT~=5 ===
243 243  
244 -(((
245 -LDS12-LB will uplink payload via LoRaWAN with below payload format: 
246 -)))
247 247  
248 -(((
249 -Uplink payload includes in total 11 bytes.
250 -)))
141 +Users can use the downlink command(**0x26 01**) to ask DS20L to send device configure detail, include device configure status. DS20L will uplink a payload via FPort=5 to server.
251 251  
143 +The Payload format is as below.
144 +
252 252  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
253 -|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)(((
146 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
254 254  **Size(bytes)**
255 -)))|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**
256 -|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
257 -[[Temperature DS18B20>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
258 -)))|[[Distance>>||anchor="H2.3.3Distance"]]|[[Distance signal strength>>||anchor="H2.3.4Distancesignalstrength"]]|(((
259 -[[Interrupt flag>>||anchor="H2.3.5InterruptPin"]]
260 -)))|[[LiDAR temp>>||anchor="H2.3.6LiDARtemp"]]|(((
261 -[[Message Type>>||anchor="H2.3.7MessageType"]]
262 -)))
148 +)))|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**1**|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**2**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 50px;" %)**2**
149 +|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
263 263  
264 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654833689380-972.png?rev=1.1||alt="1654833689380-972.png"]]
151 +Example parse in TTNv3
265 265  
153 +[[image:1701149922873-259.png]]
266 266  
267 -=== 2.3.1 Battery Info ===
155 +(% style="color:blue" %)**Sensor Model**(%%): For DS20L, this value is 0x21
268 268  
157 +(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
269 269  
270 -Check the battery voltage for LDS12-LB.
159 +(% style="color:blue" %)**Frequency Band**:
271 271  
272 -Ex1: 0x0B45 = 2885mV
161 +0x01: EU868
273 273  
274 -Ex2: 0x0B49 = 2889mV
163 +0x02: US915
275 275  
165 +0x03: IN865
276 276  
277 -=== 2.3.2 DS18B20 Temperature sensor ===
167 +0x04: AU915
278 278  
169 +0x05: KZ865
279 279  
280 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
171 +0x06: RU864
281 281  
173 +0x07: AS923
282 282  
283 -**Example**:
175 +0x08: AS923-1
284 284  
285 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
177 +0x09: AS923-2
286 286  
287 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
179 +0x0a: AS923-3
288 288  
181 +0x0b: CN470
289 289  
290 -=== 2.3.3 Distance ===
183 +0x0c: EU433
291 291  
185 +0x0d: KR920
292 292  
293 -Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
187 +0x0e: MA869
294 294  
189 +(% style="color:blue" %)**Sub-Band**:
295 295  
296 -**Example**:
191 +AU915 and US915:value 0x00 ~~ 0x08
297 297  
298 -If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
193 +CN470: value 0x0B ~~ 0x0C
299 299  
195 +Other Bands: Always 0x00
300 300  
301 -=== 2.3.4 Distance signal strength ===
197 +(% style="color:blue" %)**Battery Info**:
302 302  
199 +Check the battery voltage.
303 303  
304 -Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
201 +Ex1: 0x0B45 = 2885mV
305 305  
203 +Ex2: 0x0B49 = 2889mV
306 306  
307 -**Example**:
308 308  
309 -If payload is: 01D7(H)=471(D), distance signal strength=471, 471>100,471≠65535, the measured value of Dist is considered credible.
206 +=== 2.3.2 Uplink Payload, FPORT~=2 ===
310 310  
311 -Customers can judge whether they need to adjust the environment based on the signal strength.
312 312  
209 +(((
210 +DS20L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS20L will:
313 313  
314 -=== 2.3.5 Interrupt Pin ===
212 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
315 315  
214 +Uplink Payload totals 11 bytes.
215 +)))
316 316  
317 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
217 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
218 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
219 +**Size(bytes)**
220 +)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white; width: 80px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**
221 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:62.5px" %)(((
222 +[[Temperature DS18B20>>||anchor="HDS18B20Temperaturesensor"]]
223 +)))|[[Distance>>||anchor="HDistance"]]|[[Distance signal strength>>||anchor="HDistancesignalstrength"]]|(% style="width:122px" %)(((
224 +[[Interrupt flag & Interrupt_level>>||anchor="HInterruptPin26A0InterruptLevel"]]
225 +)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="HLiDARtemp"]]|(% style="width:96px" %)(((
226 +[[Message Type>>||anchor="HMessageType"]]
227 +)))
318 318  
319 -Note: The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>||anchor="H1.8PinDefinitions"]].
229 +==== (% style="color:red" %)**MOD~=1** ====
320 320  
321 -**Example:**
231 +Regularly detect distance and report. When the distance exceeds the limit, the alarm flag is set to 1, and the report can be triggered by external interrupts.
322 322  
323 -0x00: Normal uplink packet.
233 +Uplink Payload totals 10 bytes.
324 324  
325 -0x01: Interrupt Uplink Packet.
235 +(% border="1" cellspacing="4" style="width:510px;background-color:#f2f2f2" %)
236 +|(% style="width:60px;background-color:#4F81BD;color:white" %)**Size(bytes)**|(% style="width:30px;background-color:#4F81BD;color:white" %)**2**|(% style="width:130px;background-color:#4F81BD;color:white" %)**1**|(% style="width:70px;background-color:#4F81BD;color:white" %)**2**|(% style="width:100px;background-color:#4F81BD;color:white" %)**1**|(% style="width:120px;background-color:#4F81BD;color:white" %)**4**
237 +|(% style="width:91px" %)Value|(% style="width:41px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:176px" %)MOD+ Alarm+Interrupt|(% style="width:74px" %)Distance|(% style="width:100px" %)Sensor State|(% style="width:119px" %)Interrupt Count
326 326  
327 327  
328 -=== 2.3.6 LiDAR temp ===
240 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
329 329  
242 +(% style="color:blue" %)**Battery Info**
330 330  
331 -Characterize the internal temperature value of the sensor.
244 +Check the battery voltage for DS20L
332 332  
333 -**Example: **
334 -If payload is: 1C(H) <<24>>24=28(D),LiDAR temp=28℃.
335 -If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
246 +Ex1: 0x0E10 = 3600mV
336 336  
248 +(% style="color:blue" %)**MOD & Alarm & Interrupt:**
337 337  
338 -=== 2.3.7 Message Type ===
250 +(% style="color:red" %)**MOD:**
339 339  
252 +**Example: ** (0x60>>6) & 0x3f =1
340 340  
341 -(((
342 -For a normal uplink payload, the message type is always 0x01.
343 -)))
254 +**0x01:**  Regularly detect distance and report.
255 +**0x02: ** Uninterrupted measurement (external power supply).
344 344  
345 -(((
346 -Valid Message Type:
347 -)))
257 +(% style="color:red" %)**Alarm:**
348 348  
349 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
350 -|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
351 -|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
352 -|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.ConfigureLDS12-LB"]]
259 +When the detection distance exceeds the limit, the alarm flag is set to 1.
353 353  
261 +(% style="color:red" %)**Interrupt:**
354 354  
355 -=== 2.3.8 Decode payload in The Things Network ===
263 +Whether it is an external interrupt.
356 356  
265 +(% style="color:blue" %)**Distance info**
357 357  
358 -While using TTN network, you can add the payload format to decode the payload.
267 +**Example**:
359 359  
360 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
269 +If payload is: 0708H: distance = 0708H = 1800 mm
361 361  
271 +(% style="color:blue" %)**Sensor State**
362 362  
363 -(((
364 -The payload decoder function for TTN is here:
365 -)))
273 +Ex1: 0x00: Normal collection distance
366 366  
367 -(((
368 -LDS12-LB TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
369 -)))
275 +Ex2 0x0x: Distance collection is wrong
370 370  
277 +(% style="color:blue" %)**Interript Count**
371 371  
372 -== 2.4 Uplink Interval ==
279 +If payload is:000007D0H: count = 07D0H =2000
373 373  
374 374  
375 -The LDS12-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
376 376  
377 377  
378 -== 2.5 ​Show Data in DataCake IoT Server ==
284 +==== (% style="color:red" %)**MOD=2** ====
379 379  
286 +Uninterrupted measurement. When the distance exceeds the limit, the output IO is set high and reports are reported every five minutes. The time can be set and powered by an external power supply.Uplink Payload totals 11bytes.
380 380  
381 -(((
382 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
383 -)))
288 +(% border="1" cellspacing="4" style="width:510px;background-color:#f2f2f2" %)
289 +|(% style="width:70px;background-color:#4F81BD;color:white" %)**Size(bytes)**|(% style="width:40px;background-color:#4F81BD;color:white" %)**2**|(% style="width:130px;background-color:#4F81BD;color:white" %)**1**|(% style="width:130px;background-color:#4F81BD;color:white" %)**4**|(% style="width:70px;background-color:#4F81BD;color:white" %)**2**|(% style="width:70px;background-color:#4F81BD;color:white" %)**2**
290 +|(% style="width:91px" %)Value|(% style="width:41px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:176px" %)MOD+Alarm+Do+Limit flag|(% style="width:74px" %)Distance Limit Alarm count|(% style="width:100px" %)Upper limit|(% style="width:119px" %)Lower limit
384 384  
385 385  
386 -(((
387 -(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
388 -)))
293 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
389 389  
390 -(((
391 -(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
392 -)))
295 +(% style="color:blue" %)**MOD & Alarm & Do & Limit flag:**
393 393  
297 +(% style="color:red" %)**MOD:**
394 394  
395 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
299 +**Example: ** (0x60>>6) & 0x3f =1
396 396  
301 +**0x01:**  Regularly detect distance and report.
302 +**0x02: ** Uninterrupted measurement (external power supply).
397 397  
398 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
304 +(% style="color:red" %)**Alarm:**
399 399  
306 +When the detection distance exceeds the limit, the alarm flag is set to 1.
400 400  
401 -(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
308 +(% style="color:red" %)**Do:**
402 402  
403 -(% style="color:blue" %)**Step 4**(%%)**: Search the LDS12-LB and add DevEUI.**
310 +When the distance exceeds the set threshold, pull the Do pin high.
404 404  
405 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
312 +(% style="color:red" %)**Limit flag:**
406 406  
314 +Mode for setting threshold: 0~~5
407 407  
408 -After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
316 +0: does not use upper and lower limits
409 409  
410 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
318 +1: Use upper and lower limits
411 411  
320 +2: is less than the lower limit value
412 412  
413 -== 2.6 Datalog Feature ==
322 +3: is greater than the lower limit value
414 414  
324 +4: is less than the upper limit
415 415  
416 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LDS12-LB will store the reading for future retrieving purposes.
326 +5: is greater than the upper limit
417 417  
418 418  
419 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
329 +(% style="color:blue" %)**Upper limit:**
420 420  
331 +The upper limit of the threshold cannot exceed 2000mm.
421 421  
422 -Set PNACKMD=1, LDS12-LB will wait for ACK for every uplink, when there is no LoRaWAN network,LDS12-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
333 +(% style="color:blue" %)**Lower limit:**
423 423  
424 -* (((
425 -a) LDS12-LB will do an ACK check for data records sending to make sure every data arrive server.
426 -)))
427 -* (((
428 -b) LDS12-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but LDS12-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if LDS12-LB gets a ACK, LDS12-LB will consider there is a network connection and resend all NONE-ACK messages.
429 -)))
335 +The lower limit of the threshold cannot be less than 3mm.
430 430  
431 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
432 432  
433 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
338 +=== 2.3.3 Historical measuring distance, FPORT~=3 ===
434 434  
435 435  
436 -=== 2.6.2 Unix TimeStamp ===
341 +DS20L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
437 437  
343 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
438 438  
439 -LDS12-LB uses Unix TimeStamp format based on
345 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
346 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
347 +**Size(bytes)**
348 +)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD; color: white; width: 85px;" %)**1**|=(% style="background-color: #4F81BD; color: white; width: 85px;" %)4
349 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)Interrupt flag & Interrupt_level|(% style="width:62.5px" %)(((
350 +Reserve(0xFF)
351 +)))|Distance|Distance signal strength|(% style="width:88px" %)(((
352 +LiDAR temp
353 +)))|(% style="width:85px" %)Unix TimeStamp
440 440  
441 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
355 +**Interrupt flag & Interrupt level:**
442 442  
443 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
357 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:480px" %)
358 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
359 +**Size(bit)**
360 +)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit7**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit6**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**[bit5:bit2]**|=(% style="width: 90px; background-color: #4F81BD; color: white;" %)**bit1**|=(% style="background-color: #4F81BD; color: white; width: 90px;" %)**bit0**
361 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)No ACK message|(% style="width:62.5px" %)Poll Message Flag|Reserve|(% style="width:91px" %)Interrupt level|(% style="width:88px" %)(((
362 +Interrupt flag
363 +)))
444 444  
445 -Below is the converter example
365 +* (((
366 +Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, DS20L will send max bytes according to the current DR and Frequency bands.
367 +)))
446 446  
447 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
369 +For example, in the US915 band, the max payload for different DR is:
448 448  
371 +**a) DR0:** max is 11 bytes so one entry of data
449 449  
450 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
373 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
451 451  
375 +**c) DR2:** total payload includes 11 entries of data
452 452  
453 -=== 2.6.3 Set Device Time ===
377 +**d) DR3:** total payload includes 22 entries of data.
454 454  
379 +If DS20L doesn't have any data in the polling time. It will uplink 11 bytes of 0
455 455  
456 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
457 457  
458 -Once LDS12-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LDS12-LB. If LDS12-LB fails to get the time from the server, LDS12-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
382 +**Downlink:**
459 459  
460 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
384 +0x31 64 CC 68 0C 64 CC 69 74 05
461 461  
386 +[[image:image-20230805144936-2.png||height="113" width="746"]]
462 462  
463 -=== 2.6.4 Poll sensor value ===
388 +**Uplink:**
464 464  
390 +43 FF 0E 10 00 B0 1E 64 CC 68 0C 40 FF 0D DE 00 A8 1E 64 CC 68 29 40 FF 09 92 00 D3 1E 64 CC 68 65 40 FF 02 3A 02 BC 1E 64 CC 68 A1 41 FF 0E 1A 00 A4 1E 64 CC 68 C0 40 FF 0D 2A 00 B8 1E 64 CC 68 E8 40 FF 00 C8 11 6A 1E 64 CC 69 24 40 FF 0E 24 00 AD 1E 64 CC 69 6D
465 465  
466 -Users can poll sensor values based on timestamps. Below is the downlink command.
467 467  
468 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
469 -|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
470 -|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
471 -|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
393 +**Parsed Value:**
472 472  
473 -(((
474 -Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
475 -)))
395 +[DISTANCE , DISTANCE_SIGNAL_STRENGTH，LIDAR_TEMP，EXTI_STATUS , EXTI_FLAG , TIME]
476 476  
477 -(((
478 -For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
479 -)))
480 480  
481 -(((
482 -Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
483 -)))
398 +[360,176,30,High,True,2023-08-04 02:53:00],
484 484  
485 -(((
486 -Uplink Internal =5s，means LDS12-LB will send one packet every 5s. range 5~~255s.
487 -)))
400 +[355,168,30,Low,False,2023-08-04 02:53:29],
488 488  
402 +[245,211,30,Low,False,2023-08-04 02:54:29],
489 489  
490 -== 2.7 Frequency Plans ==
404 +[57,700,30,Low,False,2023-08-04 02:55:29],
491 491  
406 +[361,164,30,Low,True,2023-08-04 02:56:00],
492 492  
493 -The LDS12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
408 +[337,184,30,Low,False,2023-08-04 02:56:40],
494 494  
495 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
410 +[20,4458,30,Low,False,2023-08-04 02:57:40],
496 496  
412 +[362,173,30,Low,False,2023-08-04 02:58:53],
497 497  
498 -== 2.8 LiDAR ToF Measurement ==
499 499  
500 -=== 2.8.1 Principle of Distance Measurement ===
415 +**History read from serial port：**
501 501  
417 +[[image:image-20230805145056-3.png]]
502 502  
503 -The LiDAR probe is based on TOF, namely, Time of Flight principle. To be specific, the product emits modulation wave of near infrared ray on a periodic basis, which will be reflected after contacting object. The product obtains the time of flight by measuring round-trip phase difference and then calculates relative range between the product and the detection object, as shown below.
504 504  
505 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831757579-263.png?rev=1.1||alt="1654831757579-263.png"]]
420 +=== 2.3.4 Decode payload in The Things Network ===
506 506  
507 507  
508 -=== 2.8.2 Distance Measurement Characteristics ===
423 +While using TTN network, you can add the payload format to decode the payload.
509 509  
425 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
510 510  
511 -With optimization of light path and algorithm, The LiDAR probe has minimized influence from external environment on distance measurement performance. Despite that, the range of distance measurement may still be affected by the environment illumination intensity and the reflectivity of detection object. As shown in below:
512 512  
513 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831774373-275.png?rev=1.1||alt="1654831774373-275.png"]]
514 -
515 -
516 516  (((
517 -(% style="color:blue" %)**① **(%%)Represents the detection blind zone of The LiDAR probe, 0-10cm, within which the output data is unreliable.
429 +The payload decoder function for TTN is here:
518 518  )))
519 519  
520 520  (((
521 -(% style="color:blue" %)**② **(%%)Represents the operating range of The LiDAR probe detecting black target with 10% reflectivity, 0.1-5m.
433 +DS20L TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
522 522  )))
523 523  
524 -(((
525 -(% style="color:blue" %)**③ **(%%)Represents the operating range of The LiDAR probe detecting white target with 90% reflectivity, 0.1-12m.
526 -)))
527 527  
437 +== 2.4 ​Show Data in DataCake IoT Server ==
528 528  
439 +
529 529  (((
530 -Vertical Coordinates: Represents the radius of light spot for The LiDAR probe at different distances. The diameter of light spot depends on the FOV of The LiDAR probe (the term of FOV generally refers to the smaller value between the receiving angle and the transmitting angle), which is calculated as follows:
441 +[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
531 531  )))
532 532  
533 533  
534 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831797521-720.png?rev=1.1||alt="1654831797521-720.png"]]
535 -
536 -
537 537  (((
538 -In the formula above, d is the diameter of light spot; D is detecting range; β is the value of the receiving angle of The LiDAR probe, 3.6°. Correspondence between the diameter of light spot and detecting range is given in Table below.
446 +(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
539 539  )))
540 540  
541 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831810009-716.png?rev=1.1||alt="1654831810009-716.png"]]
542 -
543 543  (((
544 -If the light spot reaches two objects with different distances, as shown in Figure 3, the output distance value will be a value between the actual distance values of the two objects. For a high accuracy requirement in practice, the above situation should be noticed to avoid the measurement error.
450 +(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
545 545  )))
546 546  
547 547  
548 -=== 2.8.3 Notice of usage ===
454 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
549 549  
550 550  
551 -Possible invalid /wrong reading for LiDAR ToF tech:
457 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
552 552  
553 -* Measure high reflectivity object such as: Mirror, Smooth ceramic tile, static milk surface, will have possible wrong readings.
554 -* While there is transparent object such as glass, water drop between the measured object and the LiDAR sensor, the reading might be wrong.
555 -* The LiDAR probe is cover by dirty things; the reading might be wrong. In this case, need to clean the probe.
556 -* The sensor window is made by Acrylic. Don't touch it with alcohol material. This will destroy the sensor window.
557 557  
460 +(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
558 558  
462 +(% style="color:blue" %)**Step 4**(%%)**: Search the DS20L and add DevEUI.**
559 559  
464 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
560 560  
561 -=== 2.8.4  Reflectivity of different objects ===
562 562  
467 +After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
563 563  
564 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:379px" %)
565 -|=(% style="width: 54px;background-color:#4F81BD;color:white" %)Item|=(% style="width: 231px;background-color:#4F81BD;color:white" %)Material|=(% style="width: 94px;background-color:#4F81BD;color:white" %)Relectivity
566 -|(% style="width:53px" %)1|(% style="width:229px" %)Black foam rubber|(% style="width:93px" %)2.4%
567 -|(% style="width:53px" %)2|(% style="width:229px" %)Black fabric|(% style="width:93px" %)3%
568 -|(% style="width:53px" %)3|(% style="width:229px" %)Black rubber|(% style="width:93px" %)4%
569 -|(% style="width:53px" %)4|(% style="width:229px" %)Coal (different types of coal)|(% style="width:93px" %)4~~8%
570 -|(% style="width:53px" %)5|(% style="width:229px" %)Black car paint|(% style="width:93px" %)5%
571 -|(% style="width:53px" %)6|(% style="width:229px" %)Black Jam|(% style="width:93px" %)10%
572 -|(% style="width:53px" %)7|(% style="width:229px" %)Opaque black plastic|(% style="width:93px" %)14%
573 -|(% style="width:53px" %)8|(% style="width:229px" %)Clean rough board|(% style="width:93px" %)20%
574 -|(% style="width:53px" %)9|(% style="width:229px" %)Translucent plastic bottle|(% style="width:93px" %)62%
575 -|(% style="width:53px" %)10|(% style="width:229px" %)Carton cardboard|(% style="width:93px" %)68%
576 -|(% style="width:53px" %)11|(% style="width:229px" %)Clean pine|(% style="width:93px" %)70%
577 -|(% style="width:53px" %)12|(% style="width:229px" %)Opaque white plastic|(% style="width:93px" %)87%
578 -|(% style="width:53px" %)13|(% style="width:229px" %)White Jam|(% style="width:93px" %)90%
579 -|(% style="width:53px" %)14|(% style="width:229px" %)Kodak Standard Whiteboard|(% style="width:93px" %)100%
580 -|(% style="width:53px" %)15|(% style="width:229px" %)(((
581 -Unpolished white metal surface
582 -)))|(% style="width:93px" %)130%
583 -|(% style="width:53px" %)16|(% style="width:229px" %)Glossy light metal surface|(% style="width:93px" %)150%
584 -|(% style="width:53px" %)17|(% style="width:229px" %)stainless steel|(% style="width:93px" %)200%
585 -|(% style="width:53px" %)18|(% style="width:229px" %)Reflector plate, reflective tape|(% style="width:93px" %)>300%
469 +[[image:1701152946067-561.png]]
586 586  
587 587  
472 +== 2.5 Frequency Plans ==
588 588  
589 589  
590 -= 3. Configure LDS12-LB =
475 +The DS20L uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
591 591  
477 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
478 +
479 +
480 += 3. Configure DS20L =
481 +
592 592  == 3.1 Configure Methods ==
593 593  
594 594  
595 -LDS12-LB supports below configure method:
485 +DS20L supports below configure method:
596 596  
597 597  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
598 598  
... ... @@ -600,9 +600,6 @@
600 600  
601 601  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
602 602  
603 -
604 -
605 -
606 606  == 3.2 General Commands ==
607 607  
608 608  
... ... @@ -617,10 +617,10 @@
617 617  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
618 618  
619 619  
620 -== 3.3 Commands special design for LDS12-LB ==
507 +== 3.3 Commands special design for DS20L ==
621 621  
622 622  
623 -These commands only valid for LDS12-LB, as below:
510 +These commands only valid for DS20L, as below:
624 624  
625 625  
626 626  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -662,15 +662,15 @@
662 662  Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
663 663  )))
664 664  * (((
665 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
552 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
666 666  )))
667 667  
668 668  === 3.3.2 Set Interrupt Mode ===
669 669  
670 670  
671 -Feature, Set Interrupt mode for PA8 of pin.
558 +Feature, Set Interrupt mode for pin of GPIO_EXTI.
672 672  
673 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
560 +When AT+INTMOD=0 is set, GPIO_EXTI is used as a digital input port.
674 674  
675 675  (% style="color:blue" %)**AT Command: AT+INTMOD**
676 676  
... ... @@ -681,7 +681,11 @@
681 681  OK
682 682  the mode is 0 =Disable Interrupt
683 683  )))
684 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
571 +|(% style="width:154px" %)(((
572 +AT+INTMOD=3
573 +
574 +(default)
575 +)))|(% style="width:196px" %)(((
685 685  Set Transmit Interval
686 686  0. (Disable Interrupt),
687 687  ~1. (Trigger by rising and falling edge)
... ... @@ -700,90 +700,77 @@
700 700  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
701 701  
702 702  
594 +== 3.3.3 Set work mode ==
703 703  
704 704  
597 +Feature: Switch working mode
705 705  
706 -=== 3.3.3 Get Firmware Version Info ===
599 +(% style="color:blue" %)**AT Command: AT+MOD**
707 707  
708 -
709 -Feature: use downlink to get firmware version.
710 -
711 -(% style="color:blue" %)**Downlink Command: 0x26**
712 -
713 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:492px" %)
714 -|(% style="background-color:#4F81BD;color:white; width:191px" %)**Downlink Control Type**|(% style="background-color:#4F81BD;color:white; width:57px" %)**FPort**|(% style="background-color:#4F81BD;color:white; width:91px" %)**Type Code**|(% style="background-color:#4F81BD;color:white; width:153px" %)**Downlink payload size(bytes)**
715 -|(% style="width:191px" %)Get Firmware Version Info|(% style="width:57px" %)Any|(% style="width:91px" %)26|(% style="width:151px" %)2
716 -
717 -* Reply to the confirmation package: 26 01
718 -* Reply to non-confirmed packet: 26 00
719 -
720 -Device will send an uplink after got this downlink command. With below payload:
721 -
722 -Configures info payload:
723 -
724 724  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
725 -|=(% style="background-color:#4F81BD;color:white" %)(((
726 -**Size(bytes)**
727 -)))|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**5**|=(% style="background-color:#4F81BD;color:white" %)**1**
728 -|**Value**|Software Type|(((
729 -Frequency Band
730 -)))|Sub-band|(((
731 -Firmware Version
732 -)))|Sensor Type|Reserve|(((
733 -[[Message Type>>||anchor="H2.3.7MessageType"]]
734 -Always 0x02
602 +|=(% style="width: 162px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 193px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Response**
603 +|(% style="width:162px" %)AT+MOD=?|(% style="width:191px" %)Get the current working mode.|(% style="width:106px" %)OK
604 +|(% style="width:162px" %)AT+MOD=1|(% style="width:191px" %)Set the working mode to Regular measurements.|(% style="width:106px" %)(((
605 +OK
606 +Attention:Take effect after ATZ
735 735  )))
736 736  
737 -(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LLDS12
609 +(% style="color:blue" %)**Downlink Command:**
738 738  
739 -(% style="color:#037691" %)**Frequency Band**:
611 +* **Example: **0x0A00  ~/~/  Same as AT+MOD=0
740 740  
741 -*0x01: EU868
613 +* **Example:** 0x0A01  ~/~/  Same as AT+MOD=1
742 742  
743 -*0x02: US915
615 +=== 3.3.4 Set threshold and threshold mode ===
744 744  
745 -*0x03: IN865
746 746  
747 -*0x04: AU915
618 +Feature, Set threshold and threshold mode
748 748  
749 -*0x05: KZ865
620 +When (% style="color:#037691" %)**AT+DOL=0,0,0,0,400**(%%) is set, No threshold is used, the sampling time is 400ms.
750 750  
751 -*0x06: RU864
622 +(% style="color:blue" %)**AT Command: AT+DOL**
752 752  
753 -*0x07: AS923
624 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
625 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:108px" %)**Response**
626 +|(% style="width:172px" %)AT+ DOL =?|(% style="width:279px" %)Get the current threshold mode and sampling time|(% style="width:118px" %)(((
627 +0,0,0,0,400
628 +OK
629 +)))
630 +|(% style="width:172px" %)AT+ DOL =1,1800,100,0,400|(% style="width:279px" %)Set only the upper and lower thresholds|(% style="width:118px" %)OK
754 754  
755 -*0x08: AS923-1
756 756  
757 -*0x09: AS923-2
758 758  
759 -*0xa0: AS923-3
634 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
635 +|(% rowspan="11" style="color:blue; width:120px" %)**AT+DOL=5,1800,0,0,400**|(% rowspan="6" style="width:240px" %)The first bit sets the limit mode|(% style="width:150px" %)0: Do not use upper and lower limits
636 +|(% style="width:251px" %)1: Use upper and lower limits
637 +|(% style="width:251px" %)2: Less than the lower limit
638 +|(% style="width:251px" %)3: Greater than the lower limit
639 +|(% style="width:251px" %)4: Less than the upper limit
640 +|(% style="width:251px" %)5: Greater than the upper limit
641 +|(% style="width:226px" %)The second bit sets the upper limit value|(% style="width:251px" %)3~~2000MM
642 +|(% style="width:226px" %)The third bit sets the lower limit value|(% style="width:251px" %)3~~2000MM
643 +|(% rowspan="2" style="width:226px" %)The fourth bit sets the over-limit alarm or person or object count.|(% style="width:251px" %)0 Over-limit alarm, DO output is high
644 +|(% style="width:251px" %)1 Person or object counting statistics
645 +|(% style="width:226px" %)The fifth bit sets the sampling time|(% style="width:251px" %)(((
646 +0~~10000ms
760 760  
648 +
649 +)))
761 761  
762 -(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
651 +(% style="color:blue" %)**Downlink Command: 0x07**
763 763  
764 -(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
653 +Format: Command Code (0x07) followed by 9bytes.
765 765  
766 -(% style="color:#037691" %)**Sensor Type**:
655 +* Example 0: Downlink Payload: 070000000000000190  **~-~-->**  AT+MOD=0,0,0,0,400
767 767  
768 -0x01: LSE01
657 +* Example 1: Downlink Payload: 070107080064000190  **~-~-->**  AT+MOD=1,1800,100,0,400
769 769  
770 -0x02: LDDS75
771 771  
772 -0x03: LDDS20
773 773  
774 -0x04: LLMS01
775 -
776 -0x05: LSPH01
777 -
778 -0x06: LSNPK01
779 -
780 -0x07: LLDS12
781 -
782 -
783 783  = 4. Battery & Power Consumption =
784 784  
785 785  
786 -LDS12-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
664 +DS20L use built-in 2400mAh non-chargeable battery for long-term use up to several years*. See below link for detail information about the battery info and how to replace.
787 787  
788 788  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
789 789  
... ... @@ -792,7 +792,7 @@
792 792  
793 793  
794 794  (% class="wikigeneratedid" %)
795 -User can change firmware LDS12-LB to:
673 +User can change firmware DS20L to:
796 796  
797 797  * Change Frequency band/ region.
798 798  
... ... @@ -800,7 +800,7 @@
800 800  
801 801  * Fix bugs.
802 802  
803 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
681 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zqv1vt3komgp4tu/AAC33PnXIcWOVl_UXBEAeT_xa?dl=0]]**
804 804  
805 805  Methods to Update Firmware:
806 806  
... ... @@ -810,10 +810,10 @@
810 810  
811 811  = 6. FAQ =
812 812  
813 -== 6.1 What is the frequency plan for LDS12-LB? ==
691 +== 6.1 What is the frequency plan for DS20L? ==
814 814  
815 815  
816 -LDS12-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
694 +DS20L use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
817 817  
818 818  
819 819  = 7. Trouble Shooting =
... ... @@ -828,11 +828,11 @@
828 828  
829 829  
830 830  (((
831 -(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance (such as glass and water, etc.)
709 +(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
832 832  )))
833 833  
834 834  (((
835 -Troubleshooting: Please avoid use of this product under such circumstance in practice.
713 +(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
836 836  )))
837 837  
838 838  
... ... @@ -841,7 +841,7 @@
841 841  )))
842 842  
843 843  (((
844 -Troubleshooting: please use dry dust-free cloth to gently remove the foreign matter.
722 +(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
845 845  )))
846 846  
847 847  
... ... @@ -848,7 +848,7 @@
848 848  = 8. Order Info =
849 849  
850 850  
851 -Part Number: (% style="color:blue" %)**LDS12-LB-XXX**
729 +Part Number: (% style="color:blue" %)**DS20L-XXX**
852 852  
853 853  (% style="color:red" %)**XXX**(%%): **The default frequency band**
854 854  
... ... @@ -873,7 +873,7 @@
873 873  
874 874  (% style="color:#037691" %)**Package Includes**:
875 875  
876 -* LDS12-LB LoRaWAN LiDAR ToF Distance Sensor x 1
754 +* DS20L LoRaWAN Smart Distance Detector x 1
877 877  
878 878  (% style="color:#037691" %)**Dimension and weight**:
879 879  
1701149922873-259.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
1701152902759-553.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.2 KB
Content
1701152946067-561.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.2 KB
Content
1701155076393-719.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.6 KB
Content
1701155150328-206.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.6 KB
Content
1701155390576-216.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +293.9 KB
Content
image-20230615152941-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230615153004-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230805103904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.9 KB
Content
image-20230805104104-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20230805144259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +872.7 KB
Content
image-20230805144936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230805145056-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
image-20230805150315-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.6 KB
Content
image-20230805155335-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.4 KB
Content
image-20230805155428-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.5 KB
Content
image-20230805155515-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.7 KB
Content
image-20231110085300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +613.3 KB
Content
image-20231110085342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +178.7 KB
Content
image-20231110091447-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20231110091506-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20231110102635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +84.7 KB
Content
image-20231128133704-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.6 KB
Content
image-20231128151132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +281.2 KB
Content