Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 82.11
edited by Xiaoling
on 2023/06/14 17:02
Change comment: There is no comment for this version
To version 123.1
edited by Xiaoling
on 2023/11/28 15:09
Change comment: Uploaded new attachment "1701155390576-216.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LDS12-LB -- LoRaWAN LiDAR ToF Distance Sensor User Manual
1 +DS20L -- LoRaWAN Smart Distance Detector User Manual
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230614153353-1.png]]
2 +[[image:image-20231110085342-2.png||height="481" width="481"]]
3 3  
4 4  
5 5  
... ... @@ -7,6 +7,7 @@
7 7  
8 8  
9 9  
10 +
10 10  **Table of Contents：**
11 11  
12 12  {{toc/}}
... ... @@ -18,172 +18,66 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LoRaWAN LiDAR ToF Distance Sensor ==
22 +== 1.1 What is LoRaWAN Smart Distance Detector ==
22 22  
23 23  
24 -The Dragino LDS12-LB is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
25 +The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN. DS20L can measure range between 3cm ~~ 200cm.
25 25  
26 -The LDS12-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
27 +DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current 
28 +consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
27 27  
28 -It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
30 +DS20L has a (% style="color:blue" %)**built-in 2400mAh non-chargeable battery**(%%) for long-term use up to several years*. Users can also power DS20L with an external power source for (% style="color:blue" %)**continuous measuring and distance alarm / counting purposes.**
29 29  
30 -The LoRa wireless technology used in LDS12-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 +DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
31 31  
32 -LDS12-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
33 33  
34 -LDS12-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
35 +[[image:image-20231110102635-5.png||height="402" width="807"]]
35 35  
36 -Each LDS12-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37 37  
38 -[[image:image-20230614162334-2.png||height="468" width="800"]]
39 -
40 -
41 41  == 1.2 ​Features ==
42 42  
43 43  
44 -* LoRaWAN 1.0.3 Class A
45 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
46 -* Ultra-low power consumption
47 -* Laser technology for distance detection
48 -* Measure Distance: 0.1m~~12m @ 90% Reflectivity
49 -* Accuracy :  ±5cm@(0.1-6m), ±1%@(6m-12m)
50 -* Monitor Battery Level
51 -* Support Bluetooth v5.1 and LoRaWAN remote configure
52 -* Support wireless OTA update firmware
41 +* LoRaWAN Class A protocol
42 +* LiDAR distance detector, range 3 ~~ 200cm
43 +* Periodically detect or continuously detect mode
53 53  * AT Commands to change parameters
54 -* Downlink to change configure
55 -* 8500mAh Battery for long term use
45 +* Remotely configure parameters via LoRaWAN Downlink
46 +* Alarm & Counting mode
47 +* Firmware upgradable via program port or LoRa protocol
48 +* Built-in 2400mAh battery or power by external power source
56 56  
57 57  == 1.3 Specification ==
58 58  
59 59  
60 -(% style="color:#037691" %)**Common DC Characteristics:**
53 +(% style="color:#037691" %)**LiDAR Sensor:**
61 61  
62 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
63 -* Operating Temperature: -40 ~~ 85°C
55 +* Operation Temperature: -40 ~~ 80 °C
56 +* Operation Humidity: 0~~99.9%RH (no Dew)
57 +* Storage Temperature: -10 ~~ 45°C
58 +* Measure Range: 3cm~~200cm @ 90% reflectivity
59 +* Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
60 +* ToF FoV: ±9°, Total 18°
61 +* Light source: VCSEL
64 64  
65 -(% style="color:#037691" %)**Probe Specification:**
63 +== 1.4 Power Consumption ==
66 66  
67 -* Storage temperature：-20℃~~75℃
68 -* Operating temperature : -20℃~~60℃
69 -* Measure Distance:
70 -** 0.1m ~~ 12m @ 90% Reflectivity
71 -** 0.1m ~~ 4m @ 10% Reflectivity
72 -* Accuracy : ±5cm@(0.1-6m), ±1%@(6m-12m)
73 -* Distance resolution : 5mm
74 -* Ambient light immunity : 70klux
75 -* Enclosure rating : IP65
76 -* Light source : LED
77 -* Central wavelength : 850nm
78 -* FOV : 3.6°
79 -* Material of enclosure : ABS+PC
80 -* Wire length : 25cm
81 81  
82 -(% style="color:#037691" %)**LoRa Spec:**
66 +(% style="color:#037691" %)**Battery Power Mode:**
83 83  
84 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
85 -* Max +22 dBm constant RF output vs.
86 -* RX sensitivity: down to -139 dBm.
87 -* Excellent blocking immunity
68 +* Idle: 0.003 mA @ 3.3v
69 +* Max : 360 mA
88 88  
89 -(% style="color:#037691" %)**Battery:**
71 +(% style="color:#037691" %)**Continuously mode**:
90 90  
91 -* Li/SOCI2 un-chargeable battery
92 -* Capacity: 8500mAh
93 -* Self-Discharge: <1% / Year @ 25°C
94 -* Max continuously current: 130mA
95 -* Max boost current: 2A, 1 second
73 +* Idle: 21 mA @ 3.3v
74 +* Max : 360 mA
96 96  
97 -(% style="color:#037691" %)**Power Consumption**
76 += 2. Configure DS20L to connect to LoRaWAN network =
98 98  
99 -* Sleep Mode: 5uA @ 3.3v
100 -* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
101 -
102 -== 1.4 Applications ==
103 -
104 -
105 -* Horizontal distance measurement
106 -* Parking management system
107 -* Object proximity and presence detection
108 -* Intelligent trash can management system
109 -* Robot obstacle avoidance
110 -* Automatic control
111 -* Sewer
112 -
113 -(% style="display:none" %)
114 -
115 -== 1.5 Sleep mode and working mode ==
116 -
117 -
118 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
119 -
120 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
121 -
122 -
123 -== 1.6 Button & LEDs ==
124 -
125 -
126 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
127 -
128 -
129 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
130 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
131 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
132 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
133 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
134 -)))
135 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
136 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
137 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
138 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
139 -)))
140 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
141 -
142 -== 1.7 BLE connection ==
143 -
144 -
145 -LDS12-LB support BLE remote configure.
146 -
147 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
148 -
149 -* Press button to send an uplink
150 -* Press button to active device.
151 -* Device Power on or reset.
152 -
153 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
154 -
155 -
156 -== 1.8 Pin Definitions ==
157 -
158 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WL03A-LB_LoRaWAN_None-Position_Rope_Type_Water_Leak_Controller_User_Manual/WebHome/image-20230613144156-1.png?rev=1.1||alt="image-20230613144156-1.png"]]
159 -
160 -
161 -
162 -== 1.9 Mechanical ==
163 -
164 -
165 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
166 -
167 -
168 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
169 -
170 -
171 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
172 -
173 -
174 -(% style="color:blue" %)**Probe Mechanical:**
175 -
176 -
177 -
178 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654827224480-952.png?rev=1.1||alt="1654827224480-952.png"]]
179 -
180 -
181 -= 2. Configure LDS12-LB to connect to LoRaWAN network =
182 -
183 183  == 2.1 How it works ==
184 184  
185 185  
186 -The LDS12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the LDS12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
81 +The DS20L is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS20L. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
187 187  
188 188  (% style="display:none" %) (%%)
189 189  
... ... @@ -192,15 +192,14 @@
192 192  
193 193  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
194 194  
195 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
90 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.(% style="display:none" %)
196 196  
197 -[[image:image-20230614162359-3.png||height="468" width="800"]](% style="display:none" %)
92 +[[image:image-20231110102635-5.png||height="402" width="807"]](% style="display:none" %)
198 198  
94 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS20L.
199 199  
200 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from LDS12-LB.
96 +Each DS20L is shipped with a sticker with the default device EUI as below:
201 201  
202 -Each LDS12-LB is shipped with a sticker with the default device EUI as below:
203 -
204 204  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
205 205  
206 206  
... ... @@ -228,10 +228,11 @@
228 228  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
229 229  
230 230  
231 -(% style="color:blue" %)**Step 2:**(%%) Activate on LDS12-LB
125 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS20L
232 232  
127 +[[image:image-20231128133704-1.png||height="189" width="441"]]
233 233  
234 -Press the button for 5 seconds to activate the LDS12-LB.
129 +Press the button for 5 seconds to activate the DS20L.
235 235  
236 236  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
237 237  
... ... @@ -240,357 +240,354 @@
240 240  
241 241  == 2.3 ​Uplink Payload ==
242 242  
138 +=== 2.3.1 Device Status, FPORT~=5 ===
243 243  
244 -(((
245 -LDS12-LB will uplink payload via LoRaWAN with below payload format: 
246 -)))
247 247  
248 -(((
249 -Uplink payload includes in total 11 bytes.
250 -)))
141 +Users can use the downlink command(**0x26 01**) to ask DS20L to send device configure detail, include device configure status. DS20L will uplink a payload via FPort=5 to server.
251 251  
143 +The Payload format is as below.
252 252  
253 253  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
254 -|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)(((
146 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
255 255  **Size(bytes)**
256 -)))|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**
257 -|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
258 -[[Temperature DS18B20>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
259 -)))|[[Distance>>||anchor="H2.3.3A0Distance"]]|[[Distance signal strength>>||anchor="H2.3.4Distancesignalstrength"]]|(((
260 -[[Interrupt flag>>||anchor="H2.3.5InterruptPin"]]
261 -)))|[[LiDAR temp>>||anchor="H2.3.6LiDARtemp"]]|(((
262 -[[Message Type>>||anchor="H2.3.7MessageType"]]
263 -)))
148 +)))|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**1**|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**2**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 50px;" %)**2**
149 +|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
264 264  
265 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654833689380-972.png?rev=1.1||alt="1654833689380-972.png"]]
151 +Example parse in TTNv3
266 266  
153 +[[image:1701149922873-259.png]]
267 267  
268 -=== 2.3.1 Battery Info ===
155 +(% style="color:blue" %)**Sensor Model**(%%): For DS20L, this value is 0x21
269 269  
157 +(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
270 270  
271 -Check the battery voltage for LDS12-LB.
159 +(% style="color:blue" %)**Frequency Band**:
272 272  
273 -Ex1: 0x0B45 = 2885mV
161 +0x01: EU868
274 274  
275 -Ex2: 0x0B49 = 2889mV
163 +0x02: US915
276 276  
165 +0x03: IN865
277 277  
278 -=== 2.3.2 DS18B20 Temperature sensor ===
167 +0x04: AU915
279 279  
169 +0x05: KZ865
280 280  
281 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
171 +0x06: RU864
282 282  
173 +0x07: AS923
283 283  
284 -**Example**:
175 +0x08: AS923-1
285 285  
286 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
177 +0x09: AS923-2
287 287  
288 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
179 +0x0a: AS923-3
289 289  
181 +0x0b: CN470
290 290  
291 -=== 2.3.3 Distance ===
183 +0x0c: EU433
292 292  
185 +0x0d: KR920
293 293  
294 -Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
187 +0x0e: MA869
295 295  
189 +(% style="color:blue" %)**Sub-Band**:
296 296  
297 -**Example**:
191 +AU915 and US915:value 0x00 ~~ 0x08
298 298  
299 -If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
193 +CN470: value 0x0B ~~ 0x0C
300 300  
195 +Other Bands: Always 0x00
301 301  
302 -=== 2.3.4 Distance signal strength ===
197 +(% style="color:blue" %)**Battery Info**:
303 303  
199 +Check the battery voltage.
304 304  
305 -Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
201 +Ex1: 0x0B45 = 2885mV
306 306  
203 +Ex2: 0x0B49 = 2889mV
307 307  
308 -**Example**:
309 309  
310 -If payload is: 01D7(H)=471(D), distance signal strength=471, 471>100,471≠65535, the measured value of Dist is considered credible.
206 +=== 2.3.2 Uplink Payload, FPORT~=2 ===
311 311  
312 -Customers can judge whether they need to adjust the environment based on the signal strength.
313 313  
209 +(((
210 +DS20L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS20L will:
314 314  
315 -=== 2.3.5 Interrupt Pin ===
212 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
316 316  
214 +Uplink Payload totals 11 bytes.
215 +)))
317 317  
318 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H4.2A0SetInterruptMode"]] for the hardware and software set up.
217 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
218 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
219 +**Size(bytes)**
220 +)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white; width: 80px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**
221 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:62.5px" %)(((
222 +[[Temperature DS18B20>>||anchor="HDS18B20Temperaturesensor"]]
223 +)))|[[Distance>>||anchor="HDistance"]]|[[Distance signal strength>>||anchor="HDistancesignalstrength"]]|(% style="width:122px" %)(((
224 +[[Interrupt flag & Interrupt_level>>||anchor="HInterruptPin26A0InterruptLevel"]]
225 +)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="HLiDARtemp"]]|(% style="width:96px" %)(((
226 +[[Message Type>>||anchor="HMessageType"]]
227 +)))
319 319  
320 -Note: The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>||anchor="H1.6A0Pinmappingandpoweron"]].
229 +==== (% style="color:red" %)**MOD~=1** ====
321 321  
322 -**Example:**
231 +Regularly detect distance and report. When the distance exceeds the limit, the alarm flag is set to 1, and the report can be triggered by external interrupts.
323 323  
324 -0x00: Normal uplink packet.
233 +Uplink Payload totals 10 bytes.
325 325  
326 -0x01: Interrupt Uplink Packet.
235 +(% border="1" cellspacing="4" style="width:510px;background-color:#f2f2f2" %)
236 +|(% style="width:60px;background-color:#4F81BD;color:white" %)**Size(bytes)**|(% style="width:30px;background-color:#4F81BD;color:white" %)**2**|(% style="width:130px;background-color:#4F81BD;color:white" %)**1**|(% style="width:70px;background-color:#4F81BD;color:white" %)**2**|(% style="width:100px;background-color:#4F81BD;color:white" %)**1**|(% style="width:120px;background-color:#4F81BD;color:white" %)**4**
237 +|(% style="width:91px" %)Value|(% style="width:41px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:176px" %)MOD+ Alarm+Interrupt|(% style="width:74px" %)Distance|(% style="width:100px" %)Sensor State|(% style="width:119px" %)Interrupt Count
327 327  
328 328  
329 -=== 2.3.6 LiDAR temp ===
240 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
330 330  
242 +(% style="color:blue" %)**Battery Info**
331 331  
332 -Characterize the internal temperature value of the sensor.
244 +Check the battery voltage for DS20L
333 333  
334 -**Example: **
335 -If payload is: 1C(H) <<24>>24=28(D),LiDAR temp=28℃.
336 -If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
246 +Ex1: 0x0E10 = 3600mV
337 337  
248 +(% style="color:blue" %)**MOD & Alarm & Interrupt:**
338 338  
339 -=== 2.3.7 Message Type ===
250 +(% style="color:red" %)**MOD:**
340 340  
252 +**Example: ** (0x60>>6) & 0x3f =1
341 341  
342 -(((
343 -For a normal uplink payload, the message type is always 0x01.
344 -)))
254 +**0x01:**  Regularly detect distance and report.
255 +**0x02: ** Uninterrupted measurement (external power supply).
345 345  
346 -(((
347 -Valid Message Type:
348 -)))
257 +(% style="color:red" %)**Alarm:**
349 349  
350 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
351 -|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
352 -|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
353 -|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H4.3GetFirmwareVersionInfo"]]
259 +When the detection distance exceeds the limit, the alarm flag is set to 1.
354 354  
261 +(% style="color:red" %)**Interrupt:**
355 355  
263 +Whether it is an external interrupt.
356 356  
357 -=== 2.3.8 Decode payload in The Things Network ===
265 +(% style="color:blue" %)**Distance info**
358 358  
267 +**Example**:
359 359  
360 -While using TTN network, you can add the payload format to decode the payload.
269 +If payload is: 0708H: distance = 0708H = 1800 mm
361 361  
362 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
271 +(% style="color:blue" %)**Sensor State**
363 363  
273 +Ex1: 0x00: Normal collection distance
364 364  
365 -(((
366 -The payload decoder function for TTN is here:
367 -)))
275 +Ex2 0x0x: Distance collection is wrong
368 368  
369 -(((
370 -LDS12-LB TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
371 -)))
277 +(% style="color:blue" %)**Interript Count**
372 372  
279 +If payload is:000007D0H: count = 07D0H =2000
373 373  
374 -== 2.4 Uplink Interval ==
375 375  
376 376  
377 -The LDS12-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
378 378  
284 +==== (% style="color:red" %)**MOD=2** ====
379 379  
380 -== 2.5 ​Show Data in DataCake IoT Server ==
286 +Uninterrupted measurement. When the distance exceeds the limit, the output IO is set high and reports are reported every five minutes. The time can be set and powered by an external power supply.Uplink Payload totals 11bytes.
381 381  
288 +(% border="1" cellspacing="4" style="width:510px;background-color:#f2f2f2" %)
289 +|(% style="width:70px;background-color:#4F81BD;color:white" %)**Size(bytes)**|(% style="width:40px;background-color:#4F81BD;color:white" %)**2**|(% style="width:130px;background-color:#4F81BD;color:white" %)**1**|(% style="width:130px;background-color:#4F81BD;color:white" %)**4**|(% style="width:70px;background-color:#4F81BD;color:white" %)**2**|(% style="width:70px;background-color:#4F81BD;color:white" %)**2**
290 +|(% style="width:91px" %)Value|(% style="width:41px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:176px" %)MOD+Alarm+Do+Limit flag|(% style="width:74px" %)Distance Limit Alarm count|(% style="width:100px" %)Upper limit|(% style="width:119px" %)Lower limit
382 382  
383 -(((
384 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
385 -)))
386 386  
293 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
387 387  
388 -(((
389 -(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
390 -)))
295 +(% style="color:blue" %)**MOD & Alarm & Do & Limit flag:**
391 391  
392 -(((
393 -(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
394 -)))
297 +(% style="color:red" %)**MOD:**
395 395  
299 +**Example: ** (0x60>>6) & 0x3f =1
396 396  
397 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
301 +**0x01:**  Regularly detect distance and report.
302 +**0x02: ** Uninterrupted measurement (external power supply).
398 398  
304 +(% style="color:red" %)**Alarm:**
399 399  
400 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
306 +When the detection distance exceeds the limit, the alarm flag is set to 1.
401 401  
308 +(% style="color:red" %)**Do:**
402 402  
403 -(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
310 +When the distance exceeds the set threshold, pull the Do pin high.
404 404  
405 -(% style="color:blue" %)**Step 4**(%%)**: Search the LDS12-LB and add DevEUI.**
312 +(% style="color:red" %)**Limit flag:**
406 406  
407 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
314 +Mode for setting threshold: 0~~5
408 408  
316 +0: does not use upper and lower limits
409 409  
410 -After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
318 +1: Use upper and lower limits
411 411  
412 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
320 +2: is less than the lower limit value
413 413  
322 +3: is greater than the lower limit value
414 414  
415 -== 2.6 Datalog Feature ==
324 +4: is less than the upper limit
416 416  
326 +5: is greater than the upper limit
417 417  
418 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LDS12-LB will store the reading for future retrieving purposes.
419 419  
329 +(% style="color:blue" %)**Upper limit:**
420 420  
421 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
331 +The upper limit of the threshold cannot exceed 2000mm.
422 422  
333 +(% style="color:blue" %)**Lower limit:**
423 423  
424 -Set PNACKMD=1, LDS12-LB will wait for ACK for every uplink, when there is no LoRaWAN network,LDS12-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
335 +The lower limit of the threshold cannot be less than 3mm.
425 425  
426 -* (((
427 -a) LDS12-LB will do an ACK check for data records sending to make sure every data arrive server.
428 -)))
429 -* (((
430 -b) LDS12-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but LDS12-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if LDS12-LB gets a ACK, LDS12-LB will consider there is a network connection and resend all NONE-ACK messages.
431 -)))
432 432  
433 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
338 +=== 2.3.3 Historical measuring distance, FPORT~=3 ===
434 434  
435 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
436 436  
341 +DS20L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
437 437  
438 -=== 2.6.2 Unix TimeStamp ===
343 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
439 439  
345 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
346 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
347 +**Size(bytes)**
348 +)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD; color: white; width: 85px;" %)**1**|=(% style="background-color: #4F81BD; color: white; width: 85px;" %)4
349 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)Interrupt flag & Interrupt_level|(% style="width:62.5px" %)(((
350 +Reserve(0xFF)
351 +)))|Distance|Distance signal strength|(% style="width:88px" %)(((
352 +LiDAR temp
353 +)))|(% style="width:85px" %)Unix TimeStamp
440 440  
441 -LDS12-LB uses Unix TimeStamp format based on
355 +**Interrupt flag & Interrupt level:**
442 442  
443 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
357 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:480px" %)
358 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
359 +**Size(bit)**
360 +)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit7**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit6**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**[bit5:bit2]**|=(% style="width: 90px; background-color: #4F81BD; color: white;" %)**bit1**|=(% style="background-color: #4F81BD; color: white; width: 90px;" %)**bit0**
361 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)No ACK message|(% style="width:62.5px" %)Poll Message Flag|Reserve|(% style="width:91px" %)Interrupt level|(% style="width:88px" %)(((
362 +Interrupt flag
363 +)))
444 444  
445 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
365 +* (((
366 +Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, DS20L will send max bytes according to the current DR and Frequency bands.
367 +)))
446 446  
447 -Below is the converter example
369 +For example, in the US915 band, the max payload for different DR is:
448 448  
449 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
371 +**a) DR0:** max is 11 bytes so one entry of data
450 450  
373 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
451 451  
452 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
375 +**c) DR2:** total payload includes 11 entries of data
453 453  
377 +**d) DR3:** total payload includes 22 entries of data.
454 454  
455 -=== 2.6.3 Set Device Time ===
379 +If DS20L doesn't have any data in the polling time. It will uplink 11 bytes of 0
456 456  
457 457  
458 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
382 +**Downlink:**
459 459  
460 -Once LDS12-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LDS12-LB. If LDS12-LB fails to get the time from the server, LDS12-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
384 +0x31 64 CC 68 0C 64 CC 69 74 05
461 461  
462 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
386 +[[image:image-20230805144936-2.png||height="113" width="746"]]
463 463  
388 +**Uplink:**
464 464  
465 -=== 2.6.4 Poll sensor value ===
390 +43 FF 0E 10 00 B0 1E 64 CC 68 0C 40 FF 0D DE 00 A8 1E 64 CC 68 29 40 FF 09 92 00 D3 1E 64 CC 68 65 40 FF 02 3A 02 BC 1E 64 CC 68 A1 41 FF 0E 1A 00 A4 1E 64 CC 68 C0 40 FF 0D 2A 00 B8 1E 64 CC 68 E8 40 FF 00 C8 11 6A 1E 64 CC 69 24 40 FF 0E 24 00 AD 1E 64 CC 69 6D
466 466  
467 467  
468 -Users can poll sensor values based on timestamps. Below is the downlink command.
393 +**Parsed Value:**
469 469  
470 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
471 -|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
472 -|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
473 -|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
395 +[DISTANCE , DISTANCE_SIGNAL_STRENGTH，LIDAR_TEMP，EXTI_STATUS , EXTI_FLAG , TIME]
474 474  
475 -(((
476 -Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
477 -)))
478 478  
479 -(((
480 -For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
481 -)))
398 +[360,176,30,High,True,2023-08-04 02:53:00],
482 482  
483 -(((
484 -Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
485 -)))
400 +[355,168,30,Low,False,2023-08-04 02:53:29],
486 486  
487 -(((
488 -Uplink Internal =5s，means LDS12-LB will send one packet every 5s. range 5~~255s.
489 -)))
402 +[245,211,30,Low,False,2023-08-04 02:54:29],
490 490  
404 +[57,700,30,Low,False,2023-08-04 02:55:29],
491 491  
492 -== 2.7 Frequency Plans ==
406 +[361,164,30,Low,True,2023-08-04 02:56:00],
493 493  
408 +[337,184,30,Low,False,2023-08-04 02:56:40],
494 494  
495 -The LDS12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
410 +[20,4458,30,Low,False,2023-08-04 02:57:40],
496 496  
497 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
412 +[362,173,30,Low,False,2023-08-04 02:58:53],
498 498  
499 499  
500 -== 2.8 LiDAR ToF Measurement ==
415 +**History read from serial port：**
501 501  
502 -=== 2.8.1 Principle of Distance Measurement ===
417 +[[image:image-20230805145056-3.png]]
503 503  
504 504  
505 -The LiDAR probe is based on TOF, namely, Time of Flight principle. To be specific, the product emits modulation wave of near infrared ray on a periodic basis, which will be reflected after contacting object. The product obtains the time of flight by measuring round-trip phase difference and then calculates relative range between the product and the detection object, as shown below.
420 +=== 2.3.4 Decode payload in The Things Network ===
506 506  
507 507  
508 -[[image:1654831757579-263.png]]
423 +While using TTN network, you can add the payload format to decode the payload.
509 509  
425 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
510 510  
511 -=== 2.8.2 Distance Measurement Characteristics ===
512 512  
428 +(((
429 +The payload decoder function for TTN is here:
430 +)))
513 513  
514 -With optimization of light path and algorithm, The LiDAR probe has minimized influence from external environment on distance measurement performance. Despite that, the range of distance measurement may still be affected by the environment illumination intensity and the reflectivity of detection object. As shown in below:
432 +(((
433 +DS20L TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
434 +)))
515 515  
516 -[[image:1654831774373-275.png]]
517 517  
437 +== 2.4 ​Show Data in DataCake IoT Server ==
518 518  
439 +
519 519  (((
520 -(% style="color:blue" %)**① **(%%)Represents the detection blind zone of The LiDAR probe, 0-10cm, within which the output data is unreliable.
441 +[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
521 521  )))
522 522  
444 +
523 523  (((
524 -(% style="color:blue" %)**② **(%%)Represents the operating range of The LiDAR probe detecting black target with 10% reflectivity, 0.1-5m.
446 +(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
525 525  )))
526 526  
527 527  (((
528 -(% style="color:blue" %)**③ **(%%)Represents the operating range of The LiDAR probe detecting white target with 90% reflectivity, 0.1-12m.
450 +(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
529 529  )))
530 530  
531 531  
532 -(((
533 -Vertical Coordinates: Represents the radius of light spot for The LiDAR probe at different distances. The diameter of light spot depends on the FOV of The LiDAR probe (the term of FOV generally refers to the smaller value between the receiving angle and the transmitting angle), which is calculated as follows:
534 -)))
454 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
535 535  
536 536  
537 -[[image:1654831797521-720.png]]
457 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
538 538  
539 539  
540 -(((
541 -In the formula above, d is the diameter of light spot; D is detecting range; β is the value of the receiving angle of The LiDAR probe, 3.6°. Correspondence between the diameter of light spot and detecting range is given in Table below.
542 -)))
460 +(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
543 543  
544 -[[image:1654831810009-716.png]]
462 +(% style="color:blue" %)**Step 4**(%%)**: Search the DS20L and add DevEUI.**
545 545  
464 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
546 546  
547 -(((
548 -If the light spot reaches two objects with different distances, as shown in Figure 3, the output distance value will be a value between the actual distance values of the two objects. For a high accuracy requirement in practice, the above situation should be noticed to avoid the measurement error.
549 -)))
550 550  
467 +After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
551 551  
552 -=== 2.8.3 Notice of usage: ===
469 +[[image:1701152946067-561.png]]
553 553  
554 554  
555 -Possible invalid /wrong reading for LiDAR ToF tech:
472 +== 2.5 Frequency Plans ==
556 556  
557 -* Measure high reflectivity object such as: Mirror, Smooth ceramic tile, static milk surface, will have possible wrong readings.
558 -* While there is transparent object such as glass, water drop between the measured object and the LiDAR sensor, the reading might be wrong.
559 -* The LiDAR probe is cover by dirty things; the reading might be wrong. In this case, need to clean the probe.
560 -* The sensor window is made by Acrylic. Don't touch it with alcohol material. This will destroy the sensor window.
561 561  
562 -=== 2.8.4  Reflectivity of different objects ===
475 +The DS20L uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
563 563  
477 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
564 564  
565 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:379px" %)
566 -|=(% style="width: 54px;background-color:#D9E2F3;color:#0070C0" %)Item|=(% style="width: 231px;background-color:#D9E2F3;color:#0070C0" %)Material|=(% style="width: 94px;background-color:#D9E2F3;color:#0070C0" %)Relectivity
567 -|(% style="width:53px" %)1|(% style="width:229px" %)Black foam rubber|(% style="width:93px" %)2.4%
568 -|(% style="width:53px" %)2|(% style="width:229px" %)Black fabric|(% style="width:93px" %)3%
569 -|(% style="width:53px" %)3|(% style="width:229px" %)Black rubber|(% style="width:93px" %)4%
570 -|(% style="width:53px" %)4|(% style="width:229px" %)Coal (different types of coal)|(% style="width:93px" %)4~~8%
571 -|(% style="width:53px" %)5|(% style="width:229px" %)Black car paint|(% style="width:93px" %)5%
572 -|(% style="width:53px" %)6|(% style="width:229px" %)Black Jam|(% style="width:93px" %)10%
573 -|(% style="width:53px" %)7|(% style="width:229px" %)Opaque black plastic|(% style="width:93px" %)14%
574 -|(% style="width:53px" %)8|(% style="width:229px" %)Clean rough board|(% style="width:93px" %)20%
575 -|(% style="width:53px" %)9|(% style="width:229px" %)Translucent plastic bottle|(% style="width:93px" %)62%
576 -|(% style="width:53px" %)10|(% style="width:229px" %)Carton cardboard|(% style="width:93px" %)68%
577 -|(% style="width:53px" %)11|(% style="width:229px" %)Clean pine|(% style="width:93px" %)70%
578 -|(% style="width:53px" %)12|(% style="width:229px" %)Opaque white plastic|(% style="width:93px" %)87%
579 -|(% style="width:53px" %)13|(% style="width:229px" %)White Jam|(% style="width:93px" %)90%
580 -|(% style="width:53px" %)14|(% style="width:229px" %)Kodak Standard Whiteboard|(% style="width:93px" %)100%
581 -|(% style="width:53px" %)15|(% style="width:229px" %)(((
582 -Unpolished white metal surface
583 -)))|(% style="width:93px" %)130%
584 -|(% style="width:53px" %)16|(% style="width:229px" %)Glossy light metal surface|(% style="width:93px" %)150%
585 -|(% style="width:53px" %)17|(% style="width:229px" %)stainless steel|(% style="width:93px" %)200%
586 -|(% style="width:53px" %)18|(% style="width:229px" %)Reflector plate, reflective tape|(% style="width:93px" %)>300%
587 587  
588 -= 3. Configure LDS12-LB =
480 += 3. Configure DS20L =
589 589  
590 590  == 3.1 Configure Methods ==
591 591  
592 592  
593 -LDS12-LB supports below configure method:
485 +DS20L supports below configure method:
594 594  
595 595  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
596 596  
... ... @@ -612,10 +612,10 @@
612 612  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
613 613  
614 614  
615 -== 3.3 Commands special design for LDS12-LB ==
507 +== 3.3 Commands special design for DS20L ==
616 616  
617 617  
618 -These commands only valid for LDS12-LB, as below:
510 +These commands only valid for DS20L, as below:
619 619  
620 620  
621 621  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -630,7 +630,7 @@
630 630  )))
631 631  
632 632  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
633 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
525 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
634 634  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
635 635  30000
636 636  OK
... ... @@ -657,26 +657,30 @@
657 657  Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
658 658  )))
659 659  * (((
660 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
552 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
661 661  )))
662 662  
663 663  === 3.3.2 Set Interrupt Mode ===
664 664  
665 665  
666 -Feature, Set Interrupt mode for PA8 of pin.
558 +Feature, Set Interrupt mode for pin of GPIO_EXTI.
667 667  
668 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
560 +When AT+INTMOD=0 is set, GPIO_EXTI is used as a digital input port.
669 669  
670 670  (% style="color:blue" %)**AT Command: AT+INTMOD**
671 671  
672 672  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
673 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
565 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
674 674  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
675 675  0
676 676  OK
677 677  the mode is 0 =Disable Interrupt
678 678  )))
679 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
571 +|(% style="width:154px" %)(((
572 +AT+INTMOD=3
573 +
574 +(default)
575 +)))|(% style="width:196px" %)(((
680 680  Set Transmit Interval
681 681  0. (Disable Interrupt),
682 682  ~1. (Trigger by rising and falling edge)
... ... @@ -695,89 +695,77 @@
695 695  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
696 696  
697 697  
698 -=== 3.3.3 Get Firmware Version Info ===
594 +== 3.3.3 Set work mode ==
699 699  
700 700  
701 -Feature: use downlink to get firmware version.
597 +Feature: Switch working mode
702 702  
703 -(% style="color:#037691" %)**Downlink Command: 0x26**
599 +(% style="color:blue" %)**AT Command: AT+MOD**
704 704  
705 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:492px" %)
706 -|(% style="background-color:#d9e2f3; color:#0070c0; width:191px" %)**Downlink Control Type**|(% style="background-color:#d9e2f3; color:#0070c0; width:57px" %)**FPort**|(% style="background-color:#d9e2f3; color:#0070c0; width:91px" %)**Type Code**|(% style="background-color:#d9e2f3; color:#0070c0; width:153px" %)**Downlink payload size(bytes)**
707 -|(% style="width:191px" %)Get Firmware Version Info|(% style="width:57px" %)Any|(% style="width:91px" %)26|(% style="width:151px" %)2
708 -
709 -* Reply to the confirmation package: 26 01
710 -* Reply to non-confirmed packet: 26 00
711 -
712 -Device will send an uplink after got this downlink command. With below payload:
713 -
714 -Configures info payload:
715 -
716 716  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
717 -|=(% style="background-color:#D9E2F3;color:#0070C0" %)(((
718 -**Size(bytes)**
719 -)))|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**5**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
720 -|**Value**|Software Type|(((
721 -Frequency
722 -Band
723 -)))|Sub-band|(((
724 -Firmware
725 -Version
726 -)))|Sensor Type|Reserve|(((
727 -[[Message Type>>||anchor="H2.3.7A0MessageType"]]
728 -Always 0x02
602 +|=(% style="width: 162px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 193px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Response**
603 +|(% style="width:162px" %)AT+MOD=?|(% style="width:191px" %)Get the current working mode.|(% style="width:106px" %)OK
604 +|(% style="width:162px" %)AT+MOD=1|(% style="width:191px" %)Set the working mode to Regular measurements.|(% style="width:106px" %)(((
605 +OK
606 +Attention:Take effect after ATZ
729 729  )))
730 730  
731 -(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LLDS12
609 +(% style="color:blue" %)**Downlink Command:**
732 732  
733 -(% style="color:#037691" %)**Frequency Band**:
611 +* **Example: **0x0A00  ~/~/  Same as AT+MOD=0
734 734  
735 -*0x01: EU868
613 +* **Example:** 0x0A01  ~/~/  Same as AT+MOD=1
736 736  
737 -*0x02: US915
615 +=== 3.3.4 Set threshold and threshold mode ===
738 738  
739 -*0x03: IN865
740 740  
741 -*0x04: AU915
618 +Feature, Set threshold and threshold mode
742 742  
743 -*0x05: KZ865
620 +When (% style="color:#037691" %)**AT+DOL=0,0,0,0,400**(%%) is set, No threshold is used, the sampling time is 400ms.
744 744  
745 -*0x06: RU864
622 +(% style="color:blue" %)**AT Command: AT+DOL**
746 746  
747 -*0x07: AS923
624 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
625 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:108px" %)**Response**
626 +|(% style="width:172px" %)AT+ DOL =?|(% style="width:279px" %)Get the current threshold mode and sampling time|(% style="width:118px" %)(((
627 +0,0,0,0,400
628 +OK
629 +)))
630 +|(% style="width:172px" %)AT+ DOL =1,1800,100,0,400|(% style="width:279px" %)Set only the upper and lower thresholds|(% style="width:118px" %)OK
748 748  
749 -*0x08: AS923-1
750 750  
751 -*0x09: AS923-2
752 752  
753 -*0xa0: AS923-3
634 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
635 +|(% rowspan="11" style="color:blue; width:120px" %)**AT+DOL=5,1800,0,0,400**|(% rowspan="6" style="width:240px" %)The first bit sets the limit mode|(% style="width:150px" %)0: Do not use upper and lower limits
636 +|(% style="width:251px" %)1: Use upper and lower limits
637 +|(% style="width:251px" %)2: Less than the lower limit
638 +|(% style="width:251px" %)3: Greater than the lower limit
639 +|(% style="width:251px" %)4: Less than the upper limit
640 +|(% style="width:251px" %)5: Greater than the upper limit
641 +|(% style="width:226px" %)The second bit sets the upper limit value|(% style="width:251px" %)3~~2000MM
642 +|(% style="width:226px" %)The third bit sets the lower limit value|(% style="width:251px" %)3~~2000MM
643 +|(% rowspan="2" style="width:226px" %)The fourth bit sets the over-limit alarm or person or object count.|(% style="width:251px" %)0 Over-limit alarm, DO output is high
644 +|(% style="width:251px" %)1 Person or object counting statistics
645 +|(% style="width:226px" %)The fifth bit sets the sampling time|(% style="width:251px" %)(((
646 +0~~10000ms
754 754  
648 +
649 +)))
755 755  
756 -(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
651 +(% style="color:blue" %)**Downlink Command: 0x07**
757 757  
758 -(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
653 +Format: Command Code (0x07) followed by 9bytes.
759 759  
760 -(% style="color:#037691" %)**Sensor Type**:
655 +* Example 0: Downlink Payload: 070000000000000190  **~-~-->**  AT+MOD=0,0,0,0,400
761 761  
762 -0x01: LSE01
657 +* Example 1: Downlink Payload: 070107080064000190  **~-~-->**  AT+MOD=1,1800,100,0,400
763 763  
764 -0x02: LDDS75
765 765  
766 -0x03: LDDS20
767 767  
768 -0x04: LLMS01
769 -
770 -0x05: LSPH01
771 -
772 -0x06: LSNPK01
773 -
774 -0x07: LLDS12
775 -
776 -
777 777  = 4. Battery & Power Consumption =
778 778  
779 779  
780 -LDS12-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
664 +DS20L use built-in 2400mAh non-chargeable battery for long-term use up to several years*. See below link for detail information about the battery info and how to replace.
781 781  
782 782  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
783 783  
... ... @@ -786,7 +786,7 @@
786 786  
787 787  
788 788  (% class="wikigeneratedid" %)
789 -User can change firmware LDS12-LB to:
673 +User can change firmware DS20L to:
790 790  
791 791  * Change Frequency band/ region.
792 792  
... ... @@ -794,7 +794,7 @@
794 794  
795 795  * Fix bugs.
796 796  
797 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
681 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zqv1vt3komgp4tu/AAC33PnXIcWOVl_UXBEAeT_xa?dl=0]]**
798 798  
799 799  Methods to Update Firmware:
800 800  
... ... @@ -804,10 +804,10 @@
804 804  
805 805  = 6. FAQ =
806 806  
807 -== 6.1 What is the frequency plan for LDS12-LB? ==
691 +== 6.1 What is the frequency plan for DS20L? ==
808 808  
809 809  
810 -LDS12-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
694 +DS20L use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
811 811  
812 812  
813 813  = 7. Trouble Shooting =
... ... @@ -822,11 +822,11 @@
822 822  
823 823  
824 824  (((
825 -(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance (such as glass and water, etc.)
709 +(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
826 826  )))
827 827  
828 828  (((
829 -Troubleshooting: Please avoid use of this product under such circumstance in practice.
713 +(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
830 830  )))
831 831  
832 832  
... ... @@ -835,7 +835,7 @@
835 835  )))
836 836  
837 837  (((
838 -Troubleshooting: please use dry dust-free cloth to gently remove the foreign matter.
722 +(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
839 839  )))
840 840  
841 841  
... ... @@ -842,7 +842,7 @@
842 842  = 8. Order Info =
843 843  
844 844  
845 -Part Number: (% style="color:blue" %)**LDS12-LB-XXX**
729 +Part Number: (% style="color:blue" %)**DS20L-XXX**
846 846  
847 847  (% style="color:red" %)**XXX**(%%): **The default frequency band**
848 848  
... ... @@ -867,7 +867,7 @@
867 867  
868 868  (% style="color:#037691" %)**Package Includes**:
869 869  
870 -* LDS12-LB LoRaWAN LiDAR ToF Distance Sensor x 1
754 +* DS20L LoRaWAN Smart Distance Detector x 1
871 871  
872 872  (% style="color:#037691" %)**Dimension and weight**:
873 873  
1701149922873-259.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
1701152902759-553.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.2 KB
Content
1701152946067-561.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.2 KB
Content
1701155076393-719.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.6 KB
Content
1701155150328-206.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.6 KB
Content
1701155390576-216.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +293.9 KB
Content
image-20230615152941-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230615153004-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230805103904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.9 KB
Content
image-20230805104104-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20230805144259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +872.7 KB
Content
image-20230805144936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230805145056-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
image-20230805150315-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.6 KB
Content
image-20230805155335-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.4 KB
Content
image-20230805155428-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.5 KB
Content
image-20230805155515-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.7 KB
Content
image-20231110085300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +613.3 KB
Content
image-20231110085342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +178.7 KB
Content
image-20231110091447-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20231110091506-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20231110102635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +84.7 KB
Content
image-20231128133704-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.6 KB
Content