Last modified by Mengting Qiu on 2023/12/14 11:15

From version 80.1
edited by Xiaoling
on 2023/06/14 15:33
Change comment: Uploaded new attachment "image-20230614153353-1.png", version {1}
To version 113.8
edited by Xiaoling
on 2023/11/10 10:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LDS12-LB -- LoRaWAN LiDAR ToF Distance Sensor User Manual
1 +DS20L -- LoRaWAN Smart Distance Detector User Manual
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230613133716-2.png||height="717" width="717"]]
2 +[[image:image-20231110085342-2.png||height="481" width="481"]]
3 3  
4 4  
5 5  
... ... @@ -19,443 +19,416 @@
19 19  
20 20  = 1. Introduction =
21 21  
22 -== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
22 +== 1.1 What is LoRaWAN Smart Distance Detector ==
23 23  
24 24  
25 -The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
25 +The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN.
26 26  
27 -The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
27 +DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current 
28 +consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
28 28  
29 -DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
30 +DS20L has a (% style="color:blue" %)**built-in 2400mAh non-chargeable battery**(%%) for long-term use up to several years*. Users can also power DS20L with an external power source for (% style="color:blue" %)**continuous measuring and distance alarm / counting purposes.**
30 30  
31 -The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 +DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
32 32  
33 -DDS20-L(% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 +DS20L supports (% style="color:blue" %)**Datalog feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
34 34  
35 -DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36 +[[image:image-20231110091506-4.png||height="391" width="768"]]
36 36  
37 -Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
38 38  
39 -[[image:image-20230613140115-3.png||height="453" width="800"]]
40 -
41 -
42 42  == 1.2 ​Features ==
43 43  
44 44  
45 -* LoRaWAN 1.0.3 Class A
46 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
47 -* Ultra-low power consumption
48 -* Liquid Level Measurement by Ultrasonic technology
49 -* Measure through container, No need to contact Liquid
50 -* Valid level range 20mm - 2000mm
51 -* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
52 -* Cable Length : 25cm
53 -* Support Bluetooth v5.1 and LoRaWAN remote configure
54 -* Support wireless OTA update firmware
42 +* LoRaWAN Class A protocol
43 +* LiDAR distance detector, range 3 ~~ 200cm
44 +* Periodically detect or continuously detect mode
55 55  * AT Commands to change parameters
56 -* Downlink to change configure
57 -* IP66 Waterproof Enclosure
58 -* 8500mAh Battery for long term use
46 +* Remotely configure parameters via LoRaWAN Downlink
47 +* Alarm & Counting mode
48 +* Datalog Feature
49 +* Firmware upgradable via program port or LoRa protocol
50 +* Built-in 2400mAh battery or power by external power source
59 59  
60 -
61 61  == 1.3 Specification ==
62 62  
63 63  
64 -(% style="color:#037691" %)**Common DC Characteristics:**
55 +(% style="color:#037691" %)**LiDAR Sensor:**
65 65  
66 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
67 -* Operating Temperature: -40 ~~ 85°C
57 +* Operation Temperature: -40 ~~ 80 °C
58 +* Operation Humidity: 0~~99.9%RH (no Dew)
59 +* Storage Temperature: -10 ~~ 45°C
60 +* Measure Range: 3cm~~200cm @ 90% reflectivity
61 +* Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
62 +* ToF FoV: ±9°, Total 18°
63 +* Light source: VCSEL
68 68  
69 -(% style="color:#037691" %)**LoRa Spec:**
70 70  
71 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
72 -* Max +22 dBm constant RF output vs.
73 -* RX sensitivity: down to -139 dBm.
74 -* Excellent blocking immunity
66 +(% style="display:none" %)
75 75  
76 -(% style="color:#037691" %)**Battery:**
77 77  
78 -* Li/SOCI2 un-chargeable battery
79 -* Capacity: 8500mAh
80 -* Self-Discharge: <1% / Year @ 25°C
81 -* Max continuously current: 130mA
82 -* Max boost current: 2A, 1 second
69 += 2. Configure DS20L to connect to LoRaWAN network =
83 83  
84 -(% style="color:#037691" %)**Power Consumption**
71 +== 2.1 How it works ==
85 85  
86 -* Sleep Mode: 5uA @ 3.3v
87 -* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
88 88  
74 +The DS20L is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS20L. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
89 89  
90 -== 1.4 Suitable Container & Liquid ==
76 +(% style="display:none" %) (%%)
91 91  
78 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
92 92  
93 -* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
94 -* Container shape is regular, and surface is smooth.
95 -* Container Thickness:
96 -** Pure metal material.  2~~8mm, best is 3~~5mm
97 -** Pure non metal material: <10 mm
98 -* Pure liquid without irregular deposition.
99 99  
81 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
100 100  
101 -(% style="display:none" %)
83 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
102 102  
103 -== 1.5 Install DDS20-LB ==
85 +[[image:image-20231110091447-3.png||height="383" width="752"]](% style="display:none" %)
104 104  
105 105  
106 -(% style="color:blue" %)**Step 1**(%%) ** Choose the installation point.**
88 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS20L.
107 107  
108 -DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
90 +Each DS20L is shipped with a sticker with the default device EUI as below:
109 109  
110 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
92 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
111 111  
112 112  
113 -(((
114 -(% style="color:blue" %)**Step 2**(%%):  **Polish the installation point.**
115 -)))
95 +You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
116 116  
117 -(((
118 -For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
119 -)))
120 120  
121 -[[image:image-20230613143052-5.png]]
98 +(% style="color:blue" %)**Register the device**
122 122  
100 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
123 123  
124 -No polish needed if the container is shine metal surface without paint or non-metal container.
125 125  
126 -[[image:image-20230613143125-6.png]]
103 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
127 127  
105 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
128 128  
129 -(((
130 -(% style="color:blue" %)**Step3:   **(%%)**Test the installation point.**
131 -)))
132 132  
133 -(((
134 -Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
135 -)))
108 +(% style="color:blue" %)**Add APP EUI in the application**
136 136  
137 -(((
138 -It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
139 -)))
140 140  
141 -(((
142 -After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
143 -)))
111 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
144 144  
145 145  
146 -(((
147 -(% style="color:blue" %)**LED Status:**
148 -)))
114 +(% style="color:blue" %)**Add APP KEY**
149 149  
150 -* (((
151 -**Onboard LED**: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
152 -)))
116 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
153 153  
154 -* (((
155 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
156 -)))
157 -* (((
158 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
159 -)))
160 160  
161 -(((
162 -LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
163 -)))
119 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS20L
164 164  
165 165  
166 -(((
167 -(% style="color:red" %)**Note :**(%%)** (% style="color:blue" %)Ultrasonic coupling paste(%%)**(% style="color:blue" %) (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
168 -)))
122 +Press the button for 5 seconds to activate the DS20L.
169 169  
124 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
170 170  
171 -(((
172 -(% style="color:blue" %)**Step4:   **(%%)**Install use Epoxy ab glue.**
173 -)))
126 +After join success, it will start to upload messages to TTN and you can see the messages in the panel.
174 174  
175 -(((
176 -Prepare Eproxy AB glue.
177 -)))
178 178  
179 -(((
180 -Put Eproxy AB glue in the sensor and press it hard on the container installation point.
181 -)))
129 +== 2.3 ​Uplink Payload ==
182 182  
183 -(((
184 -Reset DDS20-LB and see if the BLUE LED is slowly blinking.
185 -)))
131 +=== 2.3.1 Device Status, FPORT~=5 ===
186 186  
187 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
188 188  
134 +Users can use the downlink command(**0x26 01**) to ask DS20L to send device configure detail, include device configure status. DS20L will uplink a payload via FPort=5 to server.
189 189  
190 -(((
191 -(% style="color:red" %)**Note :**
136 +The Payload format is as below.
192 192  
193 -(% style="color:red" %)**1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
194 -)))
138 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
139 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
140 +**Size(bytes)**
141 +)))|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**1**|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**2**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 50px;" %)**2**
142 +|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
195 195  
196 -(((
197 -(% style="color:red" %)**2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
198 -)))
144 +Example parse in TTNv3
199 199  
146 +[[image:image-20230805103904-1.png||height="131" width="711"]]
200 200  
201 -== 1.6 Applications ==
148 +(% style="color:blue" %)**Sensor Model**(%%): For DS20L, this value is 0x24
202 202  
150 +(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
203 203  
204 -* Smart liquid control solution
152 +(% style="color:blue" %)**Frequency Band**:
205 205  
206 -* Smart liquefied gas solution
154 +0x01: EU868
207 207  
156 +0x02: US915
208 208  
209 -== 1.7 Precautions ==
158 +0x03: IN865
210 210  
160 +0x04: AU915
211 211  
212 -* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
162 +0x05: KZ865
213 213  
214 -* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
164 +0x06: RU864
215 215  
216 -* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.
166 +0x07: AS923
217 217  
218 -(% style="display:none" %)
168 +0x08: AS923-1
219 219  
220 -== 1.8 Sleep mode and working mode ==
170 +0x09: AS923-2
221 221  
172 +0x0a: AS923-3
222 222  
223 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
174 +0x0b: CN470
224 224  
225 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
176 +0x0c: EU433
226 226  
178 +0x0d: KR920
227 227  
228 -== 1.9 Button & LEDs ==
180 +0x0e: MA869
229 229  
182 +(% style="color:blue" %)**Sub-Band**:
230 230  
231 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
184 +AU915 and US915:value 0x00 ~~ 0x08
232 232  
186 +CN470: value 0x0B ~~ 0x0C
233 233  
234 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
235 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
236 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
237 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
238 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
239 -)))
240 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
241 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
242 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
243 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
244 -)))
245 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
188 +Other Bands: Always 0x00
246 246  
190 +(% style="color:blue" %)**Battery Info**:
247 247  
248 -== 1.10 BLE connection ==
192 +Check the battery voltage.
249 249  
194 +Ex1: 0x0B45 = 2885mV
250 250  
251 -DDS20-LB support BLE remote configure.
196 +Ex2: 0x0B49 = 2889mV
252 252  
253 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
254 254  
255 -* Press button to send an uplink
256 -* Press button to active device.
257 -* Device Power on or reset.
199 +=== 2.3.2 Uplink Payload, FPORT~=2 ===
258 258  
259 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
260 260  
202 +(((
203 +DS20L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS20L will:
261 261  
262 -== 1.11 Pin Definitions ==
205 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
263 263  
264 -[[image:image-20230523174230-1.png]]
207 +Uplink Payload totals 11 bytes.
208 +)))
265 265  
210 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
211 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
212 +**Size(bytes)**
213 +)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white; width: 80px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**
214 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:62.5px" %)(((
215 +[[Temperature DS18B20>>||anchor="HDS18B20Temperaturesensor"]]
216 +)))|[[Distance>>||anchor="HDistance"]]|[[Distance signal strength>>||anchor="HDistancesignalstrength"]]|(% style="width:122px" %)(((
217 +[[Interrupt flag & Interrupt_level>>||anchor="HInterruptPin26A0InterruptLevel"]]
218 +)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="HLiDARtemp"]]|(% style="width:96px" %)(((
219 +[[Message Type>>||anchor="HMessageType"]]
220 +)))
266 266  
267 -== 1.12 Mechanical ==
222 +[[image:image-20230805104104-2.png||height="136" width="754"]]
268 268  
269 269  
270 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
225 +==== (% style="color:blue" %)**Battery Info**(%%) ====
271 271  
272 272  
273 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
228 +Check the battery voltage for DS20L.
274 274  
230 +Ex1: 0x0B45 = 2885mV
275 275  
276 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
232 +Ex2: 0x0B49 = 2889mV
277 277  
278 278  
279 -(% style="color:blue" %)**Probe Mechanical:**
235 +==== (% style="color:blue" %)**DS18B20 Temperature sensor**(%%) ====
280 280  
281 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
282 282  
238 +This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
283 283  
284 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
285 285  
241 +**Example**:
286 286  
287 -= 2. Configure DDS20-LB to connect to LoRaWAN network =
243 +If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
288 288  
289 -== 2.1 How it works ==
245 +If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
290 290  
291 291  
292 -The DDS20-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS20-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
248 +==== (% style="color:blue" %)**Distance**(%%) ====
293 293  
294 -(% style="display:none" %) (%%)
295 295  
296 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
251 +Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
297 297  
298 298  
299 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
254 +**Example**:
300 300  
301 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
256 +If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
302 302  
303 -[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
304 304  
259 +==== (% style="color:blue" %)**Distance signal strength**(%%) ====
305 305  
306 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS20-LB.
307 307  
308 -Each DDS20-LB is shipped with a sticker with the default device EUI as below:
262 +Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
309 309  
310 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
311 311  
265 +**Example**:
312 312  
313 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
267 +If payload is: 01D7(H)=471(D), distance signal strength=471, 471>100,471≠65535, the measured value of Dist is considered credible.
314 314  
269 +Customers can judge whether they need to adjust the environment based on the signal strength.
315 315  
316 -(% style="color:blue" %)**Register the device**
317 317  
318 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
272 +**1) When the sensor detects valid data:**
319 319  
274 +[[image:image-20230805155335-1.png||height="145" width="724"]]
320 320  
321 -(% style="color:blue" %)**Add APP EUI and DEV EUI**
322 322  
323 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
277 +**2) When the sensor detects invalid data:**
324 324  
279 +[[image:image-20230805155428-2.png||height="139" width="726"]]
325 325  
326 -(% style="color:blue" %)**Add APP EUI in the application**
327 327  
282 +**3) When the sensor is not connected:**
328 328  
329 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
284 +[[image:image-20230805155515-3.png||height="143" width="725"]]
330 330  
331 331  
332 -(% style="color:blue" %)**Add APP KEY**
287 +==== (% style="color:blue" %)**Interrupt Pin & Interrupt Level**(%%) ====
333 333  
334 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
335 335  
290 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
336 336  
337 -(% style="color:blue" %)**Step 2:**(%%) Activate on DDS20-LB
292 +Note: The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>||anchor="H1.8PinDefinitions"]] of GPIO_EXTI .
338 338  
294 +**Example:**
339 339  
340 -Press the button for 5 seconds to activate the DDS20-LB.
296 +If byte[0]&0x01=0x00 : Normal uplink packet.
341 341  
342 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
298 +If byte[0]&0x01=0x01 : Interrupt Uplink Packet.
343 343  
344 -After join success, it will start to upload messages to TTN and you can see the messages in the panel.
345 345  
301 +==== (% style="color:blue" %)**LiDAR temp**(%%) ====
346 346  
347 -== 2.3  ​Uplink Payload ==
348 348  
304 +Characterize the internal temperature value of the sensor.
349 349  
306 +**Example: **
307 +If payload is: 1C(H) <<24>>24=28(D),LiDAR temp=28℃.
308 +If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
309 +
310 +
311 +==== (% style="color:blue" %)**Message Type**(%%) ====
312 +
313 +
350 350  (((
351 -DDS20-LB will uplink payload via LoRaWAN with below payload format: 
315 +For a normal uplink payload, the message type is always 0x01.
352 352  )))
353 353  
354 354  (((
355 -Uplink payload includes in total 8 bytes.
319 +Valid Message Type:
356 356  )))
357 357  
358 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
359 -|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
360 -**Size(bytes)**
361 -)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
362 -|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
363 -[[Distance>>||anchor="H2.3.2A0Distance"]]
364 -(unit: mm)
365 -)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
366 -[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
367 -)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
322 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
323 +|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
324 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)Normal Uplink Payload
325 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)Configure Info Payload
368 368  
369 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
327 +[[image:image-20230805150315-4.png||height="233" width="723"]]
370 370  
371 371  
372 -=== 2.3. Battery Info ===
330 +=== 2.3.3 Historical measuring distance, FPORT~=3 ===
373 373  
374 374  
375 -Check the battery voltage for DDS20-LB.
333 +DS20L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
376 376  
377 -Ex1: 0x0B45 = 2885mV
335 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
378 378  
379 -Ex2: 0x0B49 = 2889mV
337 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
338 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
339 +**Size(bytes)**
340 +)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD; color: white; width: 85px;" %)**1**|=(% style="background-color: #4F81BD; color: white; width: 85px;" %)4
341 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)Interrupt flag & Interrupt_level|(% style="width:62.5px" %)(((
342 +Reserve(0xFF)
343 +)))|Distance|Distance signal strength|(% style="width:88px" %)(((
344 +LiDAR temp
345 +)))|(% style="width:85px" %)Unix TimeStamp
380 380  
347 +**Interrupt flag & Interrupt level:**
381 381  
382 -=== 2.3.2  Distance ===
349 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:480px" %)
350 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
351 +**Size(bit)**
352 +)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit7**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit6**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**[bit5:bit2]**|=(% style="width: 90px; background-color: #4F81BD; color: white;" %)**bit1**|=(% style="background-color: #4F81BD; color: white; width: 90px;" %)**bit0**
353 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)No ACK message|(% style="width:62.5px" %)Poll Message Flag|Reserve|(% style="width:91px" %)Interrupt level|(% style="width:88px" %)(((
354 +Interrupt flag
355 +)))
383 383  
384 -
385 -(((
386 -Get the distance. Flat object range 20mm - 2000mm.
357 +* (((
358 +Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, DS20L will send max bytes according to the current DR and Frequency bands.
387 387  )))
388 388  
389 -(((
390 -For example, if the data you get from the register is **0x06 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
361 +For example, in the US915 band, the max payload for different DR is:
391 391  
392 -(% style="color:blue" %)**0605(H) = 1541 (D) = 1541 mm.**
393 -)))
363 +**a) DR0:** max is 11 bytes so one entry of data
394 394  
395 -* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
365 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
396 396  
397 -* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
367 +**c) DR2:** total payload includes 11 entries of data
398 398  
369 +**d) DR3:** total payload includes 22 entries of data.
399 399  
400 -=== 2.3.3  Interrupt Pin ===
371 +If DS20L doesn't have any data in the polling time. It will uplink 11 bytes of 0
401 401  
402 402  
403 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
374 +**Downlink:**
404 404  
405 -**Example:**
376 +0x31 64 CC 68 0C 64 CC 69 74 05
406 406  
407 -0x00: Normal uplink packet.
378 +[[image:image-20230805144936-2.png||height="113" width="746"]]
408 408  
409 -0x01: Interrupt Uplink Packet.
380 +**Uplink:**
410 410  
382 +43 FF 0E 10 00 B0 1E 64 CC 68 0C 40 FF 0D DE 00 A8 1E 64 CC 68 29 40 FF 09 92 00 D3 1E 64 CC 68 65 40 FF 02 3A 02 BC 1E 64 CC 68 A1 41 FF 0E 1A 00 A4 1E 64 CC 68 C0 40 FF 0D 2A 00 B8 1E 64 CC 68 E8 40 FF 00 C8 11 6A 1E 64 CC 69 24 40 FF 0E 24 00 AD 1E 64 CC 69 6D
411 411  
412 -=== 2.3.4  DS18B20 Temperature sensor ===
413 413  
385 +**Parsed Value:**
414 414  
415 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
387 +[DISTANCE , DISTANCE_SIGNAL_STRENGTH,LIDAR_TEMP,EXTI_STATUS , EXTI_FLAG , TIME]
416 416  
417 -**Example**:
418 418  
419 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
390 +[360,176,30,High,True,2023-08-04 02:53:00],
420 420  
421 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
392 +[355,168,30,Low,False,2023-08-04 02:53:29],
422 422  
394 +[245,211,30,Low,False,2023-08-04 02:54:29],
423 423  
424 -=== 2.3.5  Sensor Flag ===
396 +[57,700,30,Low,False,2023-08-04 02:55:29],
425 425  
398 +[361,164,30,Low,True,2023-08-04 02:56:00],
426 426  
427 -(((
428 -0x01: Detect Ultrasonic Sensor
429 -)))
400 +[337,184,30,Low,False,2023-08-04 02:56:40],
430 430  
431 -(((
432 -0x00: No Ultrasonic Sensor
433 -)))
402 +[20,4458,30,Low,False,2023-08-04 02:57:40],
434 434  
404 +[362,173,30,Low,False,2023-08-04 02:58:53],
435 435  
436 -=== 2.3.6  Decode payload in The Things Network ===
437 437  
407 +**History read from serial port:**
438 438  
439 -While using TTN network, you can add the payload format to decode the payload.
409 +[[image:image-20230805145056-3.png]]
440 440  
441 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
442 442  
443 -The payload decoder function for TTN V3 is here:
412 +=== 2.3.4 Decode payload in The Things Network ===
444 444  
445 -(((
446 -DDS20-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
447 -)))
448 448  
415 +While using TTN network, you can add the payload format to decode the payload.
449 449  
450 -== 2.4  Uplink Interval ==
417 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
451 451  
452 452  
453 -The DDS20-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
420 +(((
421 +The payload decoder function for TTN is here:
422 +)))
454 454  
424 +(((
425 +DS20L TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
426 +)))
455 455  
456 -== 2.5  ​Show Data in DataCake IoT Server ==
457 457  
429 +== 2.4 ​Show Data in DataCake IoT Server ==
458 458  
431 +
459 459  (((
460 460  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
461 461  )))
... ... @@ -478,7 +478,7 @@
478 478  
479 479  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
480 480  
481 -(% style="color:blue" %)**Step 4**(%%)**: Search the DDS20-LB and add DevEUI.**
454 +(% style="color:blue" %)**Step 4**(%%)**: Search the DS20L and add DevEUI.**
482 482  
483 483  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
484 484  
... ... @@ -488,34 +488,31 @@
488 488  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
489 489  
490 490  
491 -== 2.6 Datalog Feature ==
464 +== 2.5 Datalog Feature ==
492 492  
493 493  
494 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS20-LB will store the reading for future retrieving purposes.
467 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS20L will store the reading for future retrieving purposes.
495 495  
496 496  
497 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
470 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
498 498  
499 499  
500 -Set PNACKMD=1, DDS20-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS20-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
473 +Set PNACKMD=1, DS20L will wait for ACK for every uplink, when there is no LoRaWAN network, DS20L will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
501 501  
502 502  * (((
503 -a) DDS20-LB will do an ACK check for data records sending to make sure every data arrive server.
476 +a) DS20L will do an ACK check for data records sending to make sure every data arrive server.
504 504  )))
505 505  * (((
506 -b) DDS20-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS20-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS20-LB gets a ACK, DDS20-LB will consider there is a network connection and resend all NONE-ACK messages.
479 +b) DS20L will send data in **CONFIRMED Mode** when PNACKMD=1, but DS20L won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS20L gets a ACK, DS20L will consider there is a network connection and resend all NONE-ACK messages.
507 507  )))
508 508  
509 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
510 510  
511 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
512 512  
484 +=== 2.5.2 Unix TimeStamp ===
513 513  
514 -=== 2.6.2 Unix TimeStamp ===
515 515  
487 +DS20L uses Unix TimeStamp format based on
516 516  
517 -DDS20-LB uses Unix TimeStamp format based on
518 -
519 519  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
520 520  
521 521  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
... ... @@ -528,23 +528,23 @@
528 528  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
529 529  
530 530  
531 -=== 2.6.3 Set Device Time ===
501 +=== 2.5.3 Set Device Time ===
532 532  
533 533  
534 534  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
535 535  
536 -Once DDS20-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS20-LB. If DDS20-LB fails to get the time from the server, DDS20-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
506 +Once DS20L Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS20L. If DS20L fails to get the time from the server, DS20L will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
537 537  
538 538  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
539 539  
540 540  
541 -=== 2.6.4 Poll sensor value ===
511 +=== 2.5.4 Poll sensor value ===
542 542  
543 543  
544 544  Users can poll sensor values based on timestamps. Below is the downlink command.
545 545  
546 546  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
547 -|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
517 +|(% colspan="4" style="background-color:#4f81bd; color:white; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
548 548  |(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
549 549  |(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
550 550  
... ... @@ -561,24 +561,24 @@
561 561  )))
562 562  
563 563  (((
564 -Uplink Internal =5s,means DDS20-LB will send one packet every 5s. range 5~~255s.
534 +Uplink Internal =5s,means DS20L will send one packet every 5s. range 5~~255s.
565 565  )))
566 566  
567 567  
568 -== 2.7 Frequency Plans ==
538 +== 2.6 Frequency Plans ==
569 569  
570 570  
571 -The DDS20-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
541 +The DS20L uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
572 572  
573 573  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
574 574  
575 575  
576 -= 3. Configure DDS20-LB =
546 +3. Configure DS20L
577 577  
578 578  == 3.1 Configure Methods ==
579 579  
580 580  
581 -DDS20-LB supports below configure method:
551 +DS20L supports below configure method:
582 582  
583 583  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
584 584  
... ... @@ -586,7 +586,6 @@
586 586  
587 587  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
588 588  
589 -
590 590  == 3.2 General Commands ==
591 591  
592 592  
... ... @@ -601,10 +601,10 @@
601 601  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
602 602  
603 603  
604 -== 3.3 Commands special design for DDS20-LB ==
573 +== 3.3 Commands special design for DS20L ==
605 605  
606 606  
607 -These commands only valid for DDS20-LB, as below:
576 +These commands only valid for DS20L, as below:
608 608  
609 609  
610 610  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -619,7 +619,7 @@
619 619  )))
620 620  
621 621  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
622 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
591 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
623 623  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
624 624  30000
625 625  OK
... ... @@ -655,20 +655,24 @@
655 655  === 3.3.2 Set Interrupt Mode ===
656 656  
657 657  
658 -Feature, Set Interrupt mode for PA8 of pin.
627 +Feature, Set Interrupt mode for pin of GPIO_EXTI.
659 659  
660 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
629 +When AT+INTMOD=0 is set, GPIO_EXTI is used as a digital input port.
661 661  
662 662  (% style="color:blue" %)**AT Command: AT+INTMOD**
663 663  
664 664  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
665 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
634 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
666 666  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
667 667  0
668 668  OK
669 669  the mode is 0 =Disable Interrupt
670 670  )))
671 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
640 +|(% style="width:154px" %)(((
641 +AT+INTMOD=2
642 +
643 +(default)
644 +)))|(% style="width:196px" %)(((
672 672  Set Transmit Interval
673 673  0. (Disable Interrupt),
674 674  ~1. (Trigger by rising and falling edge)
... ... @@ -690,7 +690,7 @@
690 690  = 4. Battery & Power Consumption =
691 691  
692 692  
693 -DDS20-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
666 +DS20L use built-in 2400mAh non-chargeable battery for long-term use up to several years*. See below link for detail information about the battery info and how to replace.
694 694  
695 695  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
696 696  
... ... @@ -699,7 +699,7 @@
699 699  
700 700  
701 701  (% class="wikigeneratedid" %)
702 -User can change firmware DDS20-LB to:
675 +User can change firmware DS20L to:
703 703  
704 704  * Change Frequency band/ region.
705 705  
... ... @@ -707,7 +707,7 @@
707 707  
708 708  * Fix bugs.
709 709  
710 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
683 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zqv1vt3komgp4tu/AAC33PnXIcWOVl_UXBEAeT_xa?dl=0]]**
711 711  
712 712  Methods to Update Firmware:
713 713  
... ... @@ -715,42 +715,40 @@
715 715  
716 716  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
717 717  
718 -
719 719  = 6. FAQ =
720 720  
721 -== 6.1  What is the frequency plan for DDS20-LB? ==
693 +== 6.1 What is the frequency plan for DS20L? ==
722 722  
723 723  
724 -DDS20-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
696 +DS20L use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
725 725  
726 726  
727 -== 6.2  Can I use DDS20-LB in condensation environment? ==
699 += 7Trouble Shooting =
728 728  
701 +== 7.1 AT Command input doesn't work ==
729 729  
730 -DDS20-LB is not suitable to be used in condensation environment. Condensation on the DDS20-LB probe will affect the reading and always got 0.
731 731  
704 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
732 732  
733 -= 7.  Trouble Shooting =
734 734  
735 -== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
707 +== 7.2 Significant error between the output distant value of LiDAR and actual distance ==
736 736  
737 737  
738 -It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
710 +(((
711 +(% style="color:blue" %)**Cause ①**(%%)**:**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
712 +)))
739 739  
714 +(((
715 +(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
716 +)))
740 740  
741 -== 7.2  AT Command input doesn't work ==
742 742  
743 -
744 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
745 -
746 -
747 -== 7.3  Why i always see 0x0000 or 0 for the distance value? ==
748 -
749 -
750 750  (((
751 -LDDS20 has a strict [[**installation requirement**>>||anchor="H1.5A0InstallDDS20-LB"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.
720 +(% style="color:blue" %)**Cause ②**(%%)**: **The IR-pass filters are blocked.
721 +)))
752 752  
753 -If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.
723 +(((
724 +(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
754 754  )))
755 755  
756 756  
... ... @@ -757,7 +757,7 @@
757 757  = 8. Order Info =
758 758  
759 759  
760 -Part Number: (% style="color:blue" %)**DDS20-LB-XXX**
731 +Part Number: (% style="color:blue" %)**DS20L-XXX**
761 761  
762 762  (% style="color:red" %)**XXX**(%%): **The default frequency band**
763 763  
... ... @@ -777,13 +777,12 @@
777 777  
778 778  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
779 779  
780 -
781 781  = 9. ​Packing Info =
782 782  
783 783  
784 784  (% style="color:#037691" %)**Package Includes**:
785 785  
786 -* DDS20-LB LoRaWAN Ultrasonic Liquid Level Sensor x 1
756 +* DS20L LoRaWAN Smart Distance Detector x 1
787 787  
788 788  (% style="color:#037691" %)**Dimension and weight**:
789 789  
... ... @@ -795,7 +795,6 @@
795 795  
796 796  * Weight / pcs : g
797 797  
798 -
799 799  = 10. Support =
800 800  
801 801  
image-20230614162334-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content
image-20230614162359-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content
image-20230615152941-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230615153004-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230805103904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.9 KB
Content
image-20230805104104-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20230805144259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +872.7 KB
Content
image-20230805144936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230805145056-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
image-20230805150315-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.6 KB
Content
image-20230805155335-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.4 KB
Content
image-20230805155428-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.5 KB
Content
image-20230805155515-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.7 KB
Content
image-20231110085300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +613.3 KB
Content
image-20231110085342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +178.7 KB
Content
image-20231110091447-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20231110091506-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content