Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 79.2
edited by Xiaoling
on 2023/06/13 14:31
Change comment: There is no comment for this version
To version 67.3
edited by Xiaoling
on 2023/05/30 14:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DDS20-LB -- LoRaWAN Ultrasonic Liquid Level Sensor User Manual
1 +SW3L-LB -- LoRaWAN Flow Sensor User Manual
Content
... ... @@ -1,13 +1,10 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230613133716-2.png||height="717" width="717"]]
2 +[[image:image-20230530140053-1.jpeg||height="645" width="645"]]
3 3  
4 4  
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 11  **Table of Contents：**
12 12  
13 13  {{toc/}}
... ... @@ -19,26 +19,27 @@
19 19  
20 20  = 1. Introduction =
21 21  
22 -== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
19 +== 1.1 What is SW3L-LB LoRaWAN Flow Sensor ==
23 23  
24 24  
25 -The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
22 +The Dragino SW3L-LB is a (% style="color:blue" %)**LoRaWAN Flow Sensor**(%%). It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to(% style="color:blue" %)** monitor the water usage for buildings.**
26 26  
27 -The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
24 +The SW3L-LB will send water flow volume every 20 minutes. It can also (% style="color:blue" %)**detect the water flow status**(%%) and (% style="color:blue" %)**send Alarm**(%%), to avoid the waste for water usage such as broken toilet case.
28 28  
29 -DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
26 +SW3L-LB is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
30 30  
31 -The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +The LoRa wireless technology used in SW3L-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 32  
33 -DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 +SW3L-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 34  
35 -DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32 +SW3L-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36 36  
37 -Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 +Each SW3L-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
38 38  
39 -[[image:image-20230613140115-3.png||height="453" width="800"]]
40 40  
37 +[[image:image-20230530135919-1.png||height="404" width="806"]]
41 41  
39 +
42 42  == 1.2 ​Features ==
43 43  
44 44  
... ... @@ -45,16 +45,15 @@
45 45  * LoRaWAN 1.0.3 Class A
46 46  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
47 47  * Ultra-low power consumption
48 -* Liquid Level Measurement by Ultrasonic technology
49 -* Measure through container, No need to contact Liquid
50 -* Valid level range 20mm - 2000mm
51 -* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
52 -* Cable Length : 25cm
46 +* Open/Close detect
47 +* Open/Close statistics
48 +* Temperature & Humidity alarm
49 +* supports open alarm feature
50 +* supports Datalog feature
53 53  * Support Bluetooth v5.1 and LoRaWAN remote configure
54 54  * Support wireless OTA update firmware
55 -* AT Commands to change parameters
53 +* Uplink on periodically and open/close event
56 56  * Downlink to change configure
57 -* IP66 Waterproof Enclosure
58 58  * 8500mAh Battery for long term use
59 59  
60 60  == 1.3 Specification ==
... ... @@ -85,435 +85,603 @@
85 85  * Sleep Mode: 5uA @ 3.3v
86 86  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
87 87  
88 -== 1.4 Suitable Container & Liquid ==
85 +== 1.4 Applications ==
89 89  
90 90  
91 -* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
92 -* Container shape is regular, and surface is smooth.
93 -* Container Thickness:
94 -** Pure metal material.  2~~8mm, best is 3~~5mm
95 -** Pure non metal material: <10 mm
96 -* Pure liquid without irregular deposition.(% style="display:none" %)
88 +* Open/Close Detection
89 +* Pulse meter application
90 +* Dry Contact Detection
97 97  
92 +== 1.5 Sleep mode and working mode ==
98 98  
99 -== 1.5 Install DDS20-LB ==
100 100  
95 +(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
101 101  
102 -(% style="color:blue" %)**Step 1**(%%):  Choose the installation point.
97 +(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
103 103  
104 -DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
105 105  
106 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
100 +== 1.6 Button & LEDs ==
107 107  
108 108  
109 -(((
110 -(% style="color:blue" %)**Step 2**(%%):  Polish the installation point.
111 -)))
103 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
112 112  
113 -(((
114 -For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
105 +
106 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
107 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
108 +|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
109 +If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
110 +Meanwhile, BLE module will be active and user can connect via BLE to configure device.
115 115  )))
112 +|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
113 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
114 +(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
115 +Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
116 +)))
117 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
116 116  
117 -[[image:image-20230613143052-5.png]]
119 +== 1.7 BLE connection ==
118 118  
119 119  
120 -No polish needed if the container is shine metal surface without paint or non-metal container.
122 +CPL03-LB support BLE remote configure.
121 121  
122 -[[image:image-20230613143125-6.png]]
123 123  
125 +BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
124 124  
127 +* Press button to send an uplink
128 +* Press button to active device.
129 +* Device Power on or reset.
125 125  
126 -(((
127 -(% style="color:blue" %)**Step3:   **(%%)Test the installation point.
128 -)))
131 +If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
129 129  
130 -(((
131 -Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
132 -)))
133 133  
134 +== 1.8 Pin Definitions ==
134 134  
135 -(((
136 -It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
137 -)))
136 +[[image:image-20230523174230-1.png]]
138 138  
139 -[[image:1655256160324-178.png||height="151" width="419"]][[image:image-20220615092327-13.png||height="146" width="260"]]
140 140  
139 +== 1.9 Mechanical ==
141 141  
142 -(((
143 -After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
144 -)))
145 145  
142 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
146 146  
147 -(((
148 -(% style="color:red" %)**LED Status:**
149 -)))
150 150  
151 -* (((
152 -Onboard LED: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
153 -)))
145 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
154 154  
155 -* (((
156 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
157 -)))
158 -* (((
159 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
160 -)))
161 161  
162 -(((
163 -LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
164 -)))
148 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
165 165  
166 166  
167 -(((
168 -(% style="color:red" %)**Note 2:**
169 -)))
151 += 2. Configure CPL03-LB to connect to LoRaWAN network =
170 170  
171 -(((
172 -(% style="color:red" %)**Ultrasonic coupling paste** (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
173 -)))
153 +== 2.1 How it works ==
174 174  
175 175  
176 -(((
177 -(% style="color:blue" %)**Step4:   **(%%)Install use Epoxy ab glue.
178 -)))
156 +The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
179 179  
180 -(((
181 -Prepare Eproxy AB glue.
182 -)))
158 +(% style="display:none" %) (%%)
183 183  
184 -(((
185 -Put Eproxy AB glue in the sensor and press it hard on the container installation point.
186 -)))
160 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
187 187  
188 -(((
189 -Reset DDS20-LB and see if the BLUE LED is slowly blinking.
190 -)))
191 191  
192 -[[image:image-20220615091045-8.png||height="203" width="341"]] [[image:image-20220615091045-9.png||height="200" width="284"]]
163 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
193 193  
165 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
194 194  
195 -(((
196 -(% style="color:red" %)**Note 1:**
197 -)))
167 +[[image:image-20230530135929-2.png||height="404" width="806"]](% style="display:none" %)
198 198  
199 -(((
200 -Eproxy AB glue needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
201 -)))
202 202  
170 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
203 203  
204 -(((
205 -(% style="color:red" %)**Note 2:**
206 -)))
172 +Each CPL03-LB is shipped with a sticker with the default device EUI as below:
207 207  
208 -(((
209 -(% style="color:red" %)**Eproxy AB glue**(%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
210 -)))
174 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
211 211  
212 212  
213 -== 1.6 Applications ==
177 +You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
214 214  
215 215  
216 -* Smart liquid control solution.
180 +(% style="color:blue" %)**Register the device**
217 217  
218 -* Smart liquefied gas solution.
182 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
219 219  
220 220  
185 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
221 221  
222 -== 1.7 Precautions ==
187 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
223 223  
224 224  
225 -* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
190 +(% style="color:blue" %)**Add APP EUI in the application**
226 226  
227 -* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
228 228  
229 -* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.(% style="display:none" %)
193 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
230 230  
231 231  
232 -== 1.8 Sleep mode and working mode ==
196 +(% style="color:blue" %)**Add APP KEY**
233 233  
198 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
234 234  
235 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
236 236  
237 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
201 +(% style="color:blue" %)**Step 2:**(%%) Activate on CPL03-LB
238 238  
239 239  
240 -== 1.9 Button & LEDs ==
204 +Press the button for 5 seconds to activate the CPL03-LB.
241 241  
206 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
242 242  
243 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
208 +After join success, it will start to upload messages to TTN and you can see the messages in the panel.
244 244  
245 245  
211 +== 2.3 ​Uplink Payload ==
212 +
213 +=== 2.3.1 Device Status, FPORT~=5 ===
214 +
215 +
216 +Users can use the downlink command(**0x26 01**) to ask CPL03-LB to send device configure detail, include device configure status. CPL03-LB will uplink a payload via FPort=5 to server.
217 +
218 +The Payload format is as below.
219 +
220 +
246 246  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
247 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
248 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
249 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
250 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
251 -)))
252 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
253 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
254 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
255 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
256 -)))
257 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
222 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
223 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
224 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
258 258  
259 -== 1.10 BLE connection ==
226 +Example parse in TTNv3
260 260  
228 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652859749264-179.png?width=723&height=275&rev=1.1||alt="1652859749264-179.png"]]
261 261  
262 -DDS20-LB support BLE remote configure.
263 263  
264 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
231 +(% style="color:#037691" %)**Sensor Model**(%%): For CPL03-LB, this value is 0x0A
265 265  
266 -* Press button to send an uplink
267 -* Press button to active device.
268 -* Device Power on or reset.
233 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
269 269  
270 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
235 +(% style="color:#037691" %)**Frequency Band**:
271 271  
237 +*0x01: EU868
272 272  
273 -== 1.11 Pin Definitions ==
239 +*0x02: US915
274 274  
275 -[[image:image-20230523174230-1.png]]
241 +*0x03: IN865
276 276  
243 +*0x04: AU915
277 277  
278 -== 1.12 Mechanical ==
245 +*0x05: KZ865
279 279  
247 +*0x06: RU864
280 280  
281 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
249 +*0x07: AS923
282 282  
251 +*0x08: AS923-1
283 283  
284 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
253 +*0x09: AS923-2
285 285  
255 +*0x0a: AS923-3
286 286  
287 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
257 +*0x0b: CN470
288 288  
259 +*0x0c: EU433
289 289  
290 -(% style="color:blue" %)**Probe Mechanical:**
261 +*0x0d: KR920
291 291  
292 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
263 +*0x0e: MA869
293 293  
294 294  
295 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
266 +(% style="color:#037691" %)**Sub-Band**:
296 296  
268 +AU915 and US915:value 0x00 ~~ 0x08
297 297  
298 -= 2. Configure DDS20-LB to connect to LoRaWAN network =
270 +CN470: value 0x0B ~~ 0x0C
299 299  
300 -== 2.1 How it works ==
272 +Other Bands: Always 0x00
301 301  
302 302  
303 -The DDS45-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS45-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
275 +(% style="color:#037691" %)**Battery Info**:
304 304  
305 -(% style="display:none" %) (%%)
277 +Check the battery voltage.
306 306  
307 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
279 +Ex1: 0x0B45 = 2885mV
308 308  
281 +Ex2: 0x0B49 = 2889mV
309 309  
310 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
311 311  
312 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
284 +=== 2.3.2 Sensor Configuration, FPORT~=4 ===
313 313  
314 -[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
315 315  
287 +CPL03-LB will only send this command after getting the downlink command (0x26 02) from the server.
316 316  
317 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS45-LB.
289 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
290 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
291 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**|(% style="width:158px" %)**1**
292 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: sec)|(% style="width:158px" %)Trigger mode
318 318  
319 -Each DDS45-LB is shipped with a sticker with the default device EUI as below:
294 +* (((
295 +(% style="color:#037691" %)** TDC: (default: 0x001C20)**
296 +)))
320 320  
321 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
298 +(((
299 +Uplink interval for the total pulse count, default value is 0x001C20 which is 7200 seconds = 2 hours.
322 322  
301 +
302 +)))
323 323  
324 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
304 +* (((
305 +(% style="color:#037691" %)** Disalarm: (default: 0)**
306 +)))
325 325  
308 +(((
309 +(% style="color:blue" %)** If Disalarm = 1**(%%), CPL03-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
310 +)))
326 326  
327 -(% style="color:blue" %)**Register the device**
312 +(((
313 +(% style="color:blue" %)** If Disalarm = 0**(%%), CPL03-LB will send uplink at every TDC periodically.
328 328  
329 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
315 +
316 +)))
330 330  
318 +* (((
319 +(% style="color:#037691" %)** Keep Status & Keep Time**
320 +)))
331 331  
332 -(% style="color:blue" %)**Add APP EUI and DEV EUI**
322 +(((
323 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.5AlarmBaseonTimeout"]]
333 333  
334 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
325 +
326 +)))
335 335  
328 +* (((
329 +(% style="color:#037691" %)** Trigger mode (default: 0)**
330 +)))
336 336  
337 -(% style="color:blue" %)**Add APP EUI in the application**
332 +(((
333 +(% style="color:blue" %)** If Trigger mode = 0**(%%), count close to open event.
334 +)))
338 338  
336 +(((
337 +(% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
338 +)))
339 339  
340 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
340 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860064987-743.png?width=730&height=152&rev=1.1||alt="1652860064987-743.png"]]
341 341  
342 342  
343 -(% style="color:blue" %)**Add APP KEY**
343 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860079526-831.png?width=729&height=209&rev=1.1||alt="1652860079526-831.png"]]
344 344  
345 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
346 346  
346 +=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
347 347  
348 -(% style="color:blue" %)**Step 2:**(%%) Activate on DDS45-LB
349 349  
349 +(((
350 +(((
351 +CPL03-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL03-LB will:
352 +)))
353 +)))
350 350  
351 -Press the button for 5 seconds to activate the DDS45-LB.
355 +(((
356 +(((
357 +periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
358 +)))
359 +)))
352 352  
353 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
361 +(((
362 +(((
363 +Uplink Payload totals 11 bytes.
364 +)))
365 +)))
354 354  
355 -After join success, it will start to upload messages to TTN and you can see the messages in the panel.
367 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
368 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
369 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
370 +|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
356 356  
372 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
373 +|=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
374 +|(% style="width:60px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:228px" %)**1**|(% style="width:146px" %)**1**
375 +|(% style="width:76px" %)Value|(% style="width:80px" %)Calculate Flag|(% style="width:208px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:136px" %)Contact Status: 0: Open, 1: Close
357 357  
358 -== 2.3  ​Uplink Payload ==
377 +* (((
378 +(% style="color:#037691" %)** Calculate Flag**
379 +)))
359 359  
381 +(((
382 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
383 +)))
360 360  
361 361  (((
362 -DDS45-LB will uplink payload via LoRaWAN with below payload format: 
386 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
363 363  )))
364 364  
365 365  (((
366 -Uplink payload includes in total 8 bytes.
390 +Default value: 0. 
367 367  )))
368 368  
369 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
370 -|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
371 -**Size(bytes)**
372 -)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
373 -|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
374 -[[Distance>>||anchor="H2.3.2A0Distance"]]
375 -(unit: mm)
376 -)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
377 -[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
378 -)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
393 +(((
394 +Range (6 bits): (b)000000 ~~ (b) 111111
395 +)))
379 379  
380 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
397 +(((
398 +Refer: [[Set Calculate Flag>>||anchor="H3.3.8Setthecalculateflag"]]
381 381  
400 +
401 +)))
382 382  
383 -=== 2.3.1  Battery Info ===
403 +* (((
404 +(% style="color:#037691" %)** Alarm**
405 +)))
384 384  
407 +(((
408 +See [[Alarm Base on Timeout>>||anchor="H3.3.5AlarmBaseonTimeout"]]
385 385  
386 -Check the battery voltage for DDS45-LB.
410 +
411 +)))
387 387  
388 -Ex1: 0x0B45 = 2885mV
413 +* (((
414 +(% style="color:#037691" %)** Contact Status**
415 +)))
389 389  
390 -Ex2: 0x0B49 = 2889mV
417 +(((
418 +0: Open
419 +)))
391 391  
421 +(((
422 +1: Close
392 392  
393 -=== 2.3.2  Distance ===
424 +
425 +)))
394 394  
427 +* (((
428 +(% style="color:#037691" %)** Total pulse**
429 +)))
395 395  
396 396  (((
397 -Get the distance. Flat object range 30mm - 4500mm.
432 +Total pulse/counting base on dry [[contact trigger event>>||anchor="H2.3.2SensorConfiguration2CFPORT3D4"]]
398 398  )))
399 399  
400 400  (((
401 -For example, if the data you get from the register is **0x0B 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
436 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
402 402  
403 -(% style="color:blue" %)**0B05(H) = 2821 (D) = 2821 mm.**
438 +
404 404  )))
405 405  
406 -* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
407 -* If the sensor value lower than 0x001E (30mm), the sensor value will be 0x00.
441 +* (((
442 +(% style="color:#037691" %)** The last open duration**
443 +)))
408 408  
409 -=== 2.3.3  Interrupt Pin ===
445 +(((
446 +Dry Contact last open duration.
447 +)))
410 410  
449 +(((
450 +Unit: min.
451 +)))
411 411  
412 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
453 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860403792-491.png?width=735&height=153&rev=1.1||alt="1652860403792-491.png"]]
413 413  
414 -**Example:**
415 415  
416 -0x00: Normal uplink packet.
456 +=== 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
417 417  
418 -0x01: Interrupt Uplink Packet.
419 419  
459 +(% style="color:red" %)**Note:**
420 420  
421 -=== 2.3.4  DS18B20 Temperature sensor ===
461 +* Firmware support for this mode is not released. If users want to test, please contact Dragino support.
462 +* Users need to run (% style="color:blue" %)**AT+MOD=3**(%%) to support this model after updating the firmware.
463 +* This mode doesn't support Historical Events and Datalog features.
422 422  
465 +(% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
423 423  
424 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
467 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-1.png?width=720&height=628&rev=1.1||alt="image-20221013153352-1.png"]]
425 425  
426 -**Example**:
427 427  
428 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
470 +(% style="color:blue" %)**Payload:**
429 429  
430 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
472 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-2.png?width=1215&height=167&rev=1.1||alt="image-20221013153352-2.png"]]
431 431  
432 432  
433 -=== 2.3.5  Sensor Flag ===
475 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
476 +|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:61px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**3**
477 +|(% style="width:93px" %)Value|(% style="width:59px" %)Status|(% style="width:98px" %)(((
478 +Port1 Total Pulse(PB14)
479 +)))|(% style="width:96px" %)(((
480 +Port2 Total Pulse(PB15)
481 +)))|(% style="width:94px" %)(((
482 +Port3 Total Pulse(PA4)
483 +)))
434 434  
485 +(% style="color:blue" %)**Status:**
435 435  
487 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:257px" %)
488 +|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**6**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**
489 +|(% style="width:75px" %)Value|(% style="width:111px" %)Calculate Flag|(% style="width:68px" %)Reserve
490 +
491 +(% style="color:red" %)**Max COUNT for each port is 16777215. Exceed this number will reset to 1.**
492 +
493 +
494 +(% style="color:blue" %)**Related AT Command:**
495 +
496 +(% style="color:#037691" %)**AT+TTRMOD1:  Port1 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
497 +
498 + AT+TTRMOD1=0  Downlink Command: 0xA4 01 00
499 +
500 + AT+TTRMOD1=1  Downlink Command: 0xA4 01 01
501 +
502 +
503 +(% style="color:#037691" %)**AT+TTRMOD2:  Port2 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
504 +
505 + AT+TTRMOD1=0  Downlink Command: 0xA4 02 00
506 +
507 + AT+TTRMOD1=1  Downlink Command: 0xA4 02 01
508 +
509 +
510 +(% style="color:#037691" %)**AT+TTRMOD3:  Port3 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
511 +
512 + AT+TTRMOD1=0  Downlink Command: 0xA4 03 00
513 +
514 + AT+TTRMOD1=1  Downlink Command: 0xA4 03 01
515 +
516 +
517 +(% style="color:#037691" %)**AT+CALCFLAG:  Calculate Flag ( Default : 0 )**
518 +
519 + AT+CALCFLAG=aa
520 +
521 +
522 +(% style="color:blue" %)**Downlink Command: 0xA5 aa**
523 +
524 +(% style="color:#037691" %)**AT+COUNTMOD:  Accumulative Mode;  0: Accumulative (Default),1: Reset after uplink.**
525 +
526 + AT+COUNTMOD=0 Downlink Command: 0x0B 00
527 +
528 + AT+COUNTMOD=1 Downlink Command: 0x0B 01
529 +
530 +
531 +(% style="color:#037691" %)**AT+SETCNT:  Set count value**
532 +
533 + AT+SETCNT=1,aa  Downlink Command: 0xA6 01 aa aa aa
534 +
535 + AT+SETCNT=2,aa  Downlink Command: 0xA6 02 aa aa aa
536 +
537 + AT+SETCNT=3,aa  Downlink Command: 0xA6 03 aa aa aa
538 +
539 +
540 +(% style="color:blue" %)**Decode:  **(%%)[[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
541 +
542 +
543 +=== 2.3.5 Historical Door Open/Close Event, FPORT~=3 ===
544 +
545 +
436 436  (((
437 -0x01: Detect Ultrasonic Sensor
547 +CPL03-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
438 438  )))
439 439  
440 440  (((
441 -0x00: No Ultrasonic Sensor
551 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
442 442  )))
443 443  
554 +* (((
555 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL03-LB will send max bytes according to the current DR and Frequency bands.
556 +)))
444 444  
445 -=== 2.3.6  Decode payload in The Things Network ===
558 +(((
559 +For example, in the US915 band, the max payload for different DR is:
560 +)))
446 446  
562 +(((
563 +a) (% style="color:blue" %)**DR0**(%%): max is 11 bytes so one entry of data
564 +)))
447 447  
448 -While using TTN network, you can add the payload format to decode the payload.
566 +(((
567 +b) (% style="color:blue" %)**DR1**(%%): max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
568 +)))
449 449  
450 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
570 +(((
571 +c) (% style="color:blue" %)**DR2**(%%): total payload includes 11 entries of data
572 +)))
451 451  
452 -The payload decoder function for TTN V3 is here:
574 +(((
575 +d) (% style="color:blue" %)**DR3**(%%): total payload includes 22 entries of data.
576 +)))
453 453  
454 454  (((
455 -DDS45-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
579 +If CPL03-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
580 +
581 +
456 456  )))
457 457  
584 +(% style="color:blue" %)** Downlink:**
458 458  
459 -== 2.4  Uplink Interval ==
586 +(% class="box" %)
587 +(((
588 +**0x31 61 E9 3A D4 61 E9 3D E0 05**
589 +)))
460 460  
591 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861353248-624.png?width=720&height=189&rev=1.1||alt="1652861353248-624.png"]]
461 461  
462 -The DDS45-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
463 463  
594 +(% style="color:blue" %)** Uplink:**
464 464  
465 -== 2.5  ​Show Data in DataCake IoT Server ==
596 +(% class="box" %)
597 +(((
598 +**0E 00 23 E6 00 00 00 61 E9 3B 04 0E 00 23 E6 00 00 00 61 E9 3B 25 0D 00 00 00 00 00 00 61 E9 3B C8 0E 00 00 02 00 00 00 61 E9 3B D4 0E 00 00 06 00 00 00 61 E9 3B DB 01 00 00 00 00 00 00 61 E9 3C 91 01 00 00 00 00 00 00 61 E9 3C A1 0D 00 00 00 00 00 00 61 E9 3C BC 0E 00 00 07 00 00 00 61 E9 3C D6 00 00 00 00 00 00 00 61 E9 3D A6**
599 +)))
466 466  
601 +(% style="color:#037691" %)** **
467 467  
603 +(% style="color:#037691" %)**Parsed Value:**
604 +
468 468  (((
469 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
606 +[ALARM, PIN_STATUS, TOTAL_PULSE, CALCULATE_FLAG, LAST_OPEN_DURATION, TIME]
470 470  )))
471 471  
609 +(((
610 +
611 +)))
472 472  
473 473  (((
474 -(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
614 +[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:35:48],
475 475  )))
476 476  
477 477  (((
478 -(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
618 +[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:36:21],
479 479  )))
480 480  
621 +(((
622 +[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:39:04],
623 +)))
481 481  
482 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
625 +(((
626 +[TRUE, CLOSE, 2, 3, 0, 2022-01-20 10:39:16],
627 +)))
483 483  
629 +(((
630 +[TRUE, CLOSE, 6, 3, 0, 2022-01-20 10:39:23],
631 +)))
484 484  
485 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
633 +(((
634 +[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:25],
635 +)))
486 486  
637 +(((
638 +[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:41],
639 +)))
487 487  
488 -(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
641 +(((
642 +[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:43:08],
643 +)))
489 489  
490 -(% style="color:blue" %)**Step 4**(%%)**: Search the DDS45-LB and add DevEUI.**
645 +(((
646 +[TRUE, CLOSE, 7, 3, 0, 2022-01-20 10:43:34],
647 +)))
491 491  
492 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
649 +(((
650 +[FALSE, CLOSE, 0, 0, 0, 2022-01-20 10:47:02],
493 493  
652 +
653 +)))
494 494  
495 -After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
655 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861480446-216.png?rev=1.1||alt="1652861480446-216.png"]]
496 496  
497 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
498 498  
658 +== 2.4 Payload Decoder file ==
499 499  
500 500  
501 -== 2.6 Datalog Feature ==
661 +In TTN, use can add a custom payload so it shows friendly reading
502 502  
663 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
503 503  
504 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS45-LB will store the reading for future retrieving purposes.
505 505  
666 +== 2.5 Datalog Feature ==
506 506  
507 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
508 508  
669 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
509 509  
510 -Set PNACKMD=1, DDS45-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS45-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
511 511  
672 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
673 +
674 +
675 +Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
676 +
512 512  * (((
513 -a) DDS45-LB will do an ACK check for data records sending to make sure every data arrive server.
678 +a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
514 514  )))
515 515  * (((
516 -b) DDS45-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS45-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS45-LB gets a ACK, DDS45-LB will consider there is a network connection and resend all NONE-ACK messages.
681 +b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
517 517  )))
518 518  
519 519  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -521,10 +521,10 @@
521 521  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
522 522  
523 523  
524 -=== 2.6.2 Unix TimeStamp ===
689 +=== 2.5.2 Unix TimeStamp ===
525 525  
526 526  
527 -DDS45-LB uses Unix TimeStamp format based on
692 +CPL03-LB uses Unix TimeStamp format based on
528 528  
529 529  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
530 530  
... ... @@ -538,17 +538,17 @@
538 538  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
539 539  
540 540  
541 -=== 2.6.3 Set Device Time ===
706 +=== 2.5.3 Set Device Time ===
542 542  
543 543  
544 544  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
545 545  
546 -Once DDS45-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS45-LB. If DDS45-LB fails to get the time from the server, DDS45-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
711 +Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
547 547  
548 548  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
549 549  
550 550  
551 -=== 2.6.4 Poll sensor value ===
716 +=== 2.5.4 Poll sensor value ===
552 552  
553 553  
554 554  Users can poll sensor values based on timestamps. Below is the downlink command.
... ... @@ -571,7 +571,7 @@
571 571  )))
572 572  
573 573  (((
574 -Uplink Internal =5s，means DDS45-LB will send one packet every 5s. range 5~~255s.
739 +Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
575 575  )))
576 576  
577 577  
... ... @@ -578,22 +578,20 @@
578 578  == 2.7 Frequency Plans ==
579 579  
580 580  
581 -The DDS45-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
746 +The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
582 582  
583 583  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
584 584  
585 585  
586 -= 3. Configure DDS45-LB =
751 += 3. Configure CPL03-LB =
587 587  
588 588  == 3.1 Configure Methods ==
589 589  
590 590  
591 -DDS45-LB supports below configure method:
756 +CPL03-LB supports below configure method:
592 592  
593 593  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
594 -
595 595  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
596 -
597 597  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
598 598  
599 599  == 3.2 General Commands ==
... ... @@ -602,7 +602,6 @@
602 602  These commands are to configure:
603 603  
604 604  * General system settings like: uplink interval.
605 -
606 606  * LoRaWAN protocol & radio related command.
607 607  
608 608  They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
... ... @@ -610,10 +610,10 @@
610 610  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
611 611  
612 612  
613 -== 3.3 Commands special design for DDS45-LB ==
775 +== 3.3 Commands special design for CPL03-LB ==
614 614  
615 615  
616 -These commands only valid for DDS45-LB, as below:
778 +These commands only valid for CPL03-LB, as below:
617 617  
618 618  
619 619  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -655,12 +655,226 @@
655 655  Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
656 656  )))
657 657  * (((
658 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
820 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
821 +
822 +
823 +
659 659  )))
660 660  
661 -=== 3.3.2 Set Interrupt Mode ===
826 +=== 3.3.2 Quit AT Command ===
662 662  
663 663  
829 +Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
830 +
831 +(% style="color:blue" %)**AT Command: AT+DISAT**
832 +
833 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
834 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
835 +|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
836 +
837 +(% style="color:blue" %)**Downlink Command:**
838 +
839 +No downlink command for this feature.
840 +
841 +
842 +=== 3.3.3 Get Device Status ===
843 +
844 +
845 +Send a LoRaWAN downlink to ask device send Alarm settings.
846 +
847 +(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
848 +
849 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
850 +
851 +
852 +=== 3.3.4 Enable / Disable Alarm ===
853 +
854 +
855 +Feature: Enable/Disable Alarm for open/close event. Default value 0.
856 +
857 +(% style="color:blue" %)**AT Command:**
858 +
859 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
860 +|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
861 +|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
862 +|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
863 +
864 +(% style="color:blue" %)**Downlink Command:**
865 +
866 +**0xA7 01**  ~/~/  Same As AT+DISALARM=1
867 +
868 +**0xA7 00    ** ~/~/  Same As AT+DISALARM=0
869 +
870 +
871 +=== 3.3.5 Alarm Base on Timeout ===
872 +
873 +
874 +(((
875 +CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
876 +)))
877 +
878 +
879 +(((
880 +(% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
881 +)))
882 +
883 +(((
884 +**Keep Status = 1**: Monitor Close to Open event
885 +)))
886 +
887 +(((
888 +**Keep Status = 0**: Monitor Open to Close event
889 +)))
890 +
891 +
892 +(((
893 +(% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
894 +)))
895 +
896 +(((
897 +Range 0 ~~ 65535(0xFFFF) seconds.
898 +)))
899 +
900 +(((
901 +If** keep time = 0**, Disable Alarm Base on Timeout feature.
902 +)))
903 +
904 +(((
905 +If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
906 +)))
907 +
908 +
909 +(((
910 +(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
911 +)))
912 +
913 +(((
914 +(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
915 +)))
916 +
917 +(((
918 +(% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
919 +)))
920 +
921 +
922 +(((
923 +(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
924 +)))
925 +
926 +(((
927 +**Command: 0xA9 aa bb cc**
928 +)))
929 +
930 +(((
931 +**A9: **Command Type Code
932 +)))
933 +
934 +(((
935 +**aa: **status to be monitored
936 +)))
937 +
938 +(((
939 +**bb cc: **timeout.
940 +)))
941 +
942 +
943 +(((
944 +If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
945 +)))
946 +
947 +(((
948 +Or
949 +)))
950 +
951 +(((
952 +0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
953 +)))
954 +
955 +
956 +=== 3.3.6 Clear Flash Record ===
957 +
958 +
959 +Feature: Clear flash storage for data log feature.
960 +
961 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
962 +
963 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
964 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
965 +|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
966 +
967 +(((
968 +(% style="color:blue" %)**Downlink Command:**
969 +)))
970 +
971 +(((
972 +* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
973 +)))
974 +
975 +
976 +
977 +=== 3.3.7 Set trigger mode ===
978 +
979 +
980 +Feature: Set the trigger interrupt mode.
981 +
982 +(% style="color:blue" %)**AT Command: AT+TTRMOD**
983 +
984 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
985 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
986 +|(% style="width:157px" %)(((
987 +AT+TTRMOD=1
988 +)))|(% style="width:156px" %)Count and trigger from open to close (rising edge)|(% style="width:89px" %)(((
989 +(((
990 +OK
991 +)))
992 +)))
993 +|(% style="width:157px" %)(((
994 +AT+TTRMOD=0
995 +)))|(% style="width:156px" %)Count and trigger from close to open (falling edge)|(% style="width:89px" %)(((
996 +OK
997 +)))
998 +
999 +(% style="color:blue" %)**Downlink Command:**
1000 +
1001 +* **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
1002 +
1003 +=== 3.3.8 Set the calculate flag ===
1004 +
1005 +
1006 +Feature: Set the calculate flag
1007 +
1008 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
1009 +
1010 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
1011 +|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1012 +|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
1013 +|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
1014 +
1015 +(% style="color:blue" %)**Downlink Command:**
1016 +
1017 +* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
1018 +
1019 +=== 3.3.9 Set count number ===
1020 +
1021 +
1022 +Feature: Manually set the count number
1023 +
1024 +(% style="color:blue" %)**AT Command: AT+SETCNT**
1025 +
1026 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
1027 +|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1028 +|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
1029 +|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
1030 +
1031 +(% style="color:blue" %)**Downlink Command:**
1032 +
1033 +* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
1034 +
1035 +* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
1036 +
1037 +=== 3.3.10 Set Interrupt Mode ===
1038 +
1039 +
664 664  Feature, Set Interrupt mode for PA8 of pin.
665 665  
666 666  When AT+INTMOD=0 is set, PA8 is used as a digital input port.
... ... @@ -692,100 +692,78 @@
692 692  
693 693  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
694 694  
695 -= 4. Battery & Power Consumption =
1071 +=== 3.3.11 Set Power Output Duration ===
696 696  
697 697  
698 -DDS45-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1074 +Control the output duration 5V . Before each sampling, device will
699 699  
700 -[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1076 +~1. first enable the power output to external sensor,
701 701  
1078 +2. keep it on as per duration, read sensor value and construct uplink payload
702 702  
703 -= 5. OTA Firmware update =
1080 +3. final, close the power output.
704 704  
1082 +(% style="color:blue" %)**AT Command: AT+5VT**
705 705  
706 -(% class="wikigeneratedid" %)
707 -User can change firmware DDS45-LB to:
1084 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1085 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1086 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
1087 +OK
1088 +|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
708 708  
709 -* Change Frequency band/ region.
1090 +(% style="color:blue" %)**Downlink Command: 0x07**
710 710  
711 -* Update with new features.
1092 +Format: Command Code (0x07) followed by 2 bytes.
712 712  
713 -* Fix bugs.
1094 +The first and second bytes are the time to turn on.
714 714  
715 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/a5ue0nfrzqy9nz6/AABbvlATosDJKDwBmbirVbMYa?dl=0]]**
1096 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
716 716  
717 -Methods to Update Firmware:
1098 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
718 718  
719 -* (Recommanded way) OTA firmware update via wireless:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
1100 += 4. Battery & Power Consumption =
720 720  
721 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
722 722  
723 -= 6. FAQ =
1103 +CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
724 724  
725 -== 6.1  What is the frequency plan for DDS45-LB? ==
1105 +[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
726 726  
727 727  
728 -DDS45-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
1108 += 5. OTA Firmware update =
729 729  
730 730  
731 -== 6.2  Can I use DDS45-LB in condensation environment? ==
1111 +(% class="wikigeneratedid" %)
1112 +User can change firmware CPL03-LB to:
732 732  
1114 +* Change Frequency band/ region.
733 733  
734 -DDS45-LB is not suitable to be used in condensation environment. Condensation on the DDS45-LB probe will affect the reading and always got 0.
1116 +* Update with new features.
735 735  
1118 +* Fix bugs.
736 736  
737 -= 7.  Trouble Shooting =
1120 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
738 738  
739 -== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
1122 +Methods to Update Firmware:
740 740  
1124 +* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
741 741  
742 -It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
1126 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
743 743  
1128 += 6. FAQ =
744 744  
745 -== 7.2  AT Command input doesn't work ==
1130 +== 6.1  AT Commands input doesn't work ==
746 746  
747 747  
748 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1133 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
749 749  
750 750  
751 -== 7.3  Why does the sensor reading show 0 or "No sensor" ==
1136 += 7. Order Info =
752 752  
753 753  
754 -~1. The measurement object is very close to the sensor, but in the blind spot of the sensor.
1139 +Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
755 755  
756 -2. Sensor wiring is disconnected
1141 +(% style="color:red" %)**XXX**(%%): The default frequency band
757 757  
758 -3. Not using the correct decoder
759 -
760 -
761 -== 7.4  Abnormal readings The gap between multiple readings is too large or the gap between the readings and the actual value is too large ==
762 -
763 -
764 -1) Please check if there is something on the probe affecting its measurement (condensed water, volatile oil, etc.)
765 -
766 -2) Does it change with temperature, temperature will affect its measurement
767 -
768 -3) If abnormal data occurs, you can turn on DEBUG mode, Please use downlink or AT COMMAN to enter DEBUG mode.
769 -
770 -downlink command: (% style="color:blue" %)**F1 01**(%%), AT command: (% style="color:blue" %)**AT+DDEBUG=1**
771 -
772 -4) After entering the debug mode, it will send 20 pieces of data at a time, and you can send its uplink to us for analysis
773 -
774 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20230113135125-2.png?width=1057&height=136&rev=1.1||alt="image-20230113135125-2.png"]]
775 -
776 -
777 -Its original payload will be longer than other data. Even though it is being parsed, it can be seen that it is abnormal data.
778 -
779 -Please send the data to us for check.
780 -
781 -
782 -= 8. Order Info =
783 -
784 -
785 -Part Number: (% style="color:blue" %)**DDS45-LB-XXX**
786 -
787 -(% style="color:red" %)**XXX**(%%): **The default frequency band**
788 -
789 789  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
790 790  
791 791  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
... ... @@ -802,12 +802,12 @@
802 802  
803 803  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
804 804  
805 -= 9. ​Packing Info =
1159 += 8. ​Packing Info =
806 806  
807 807  
808 808  (% style="color:#037691" %)**Package Includes**:
809 809  
810 -* DDS45-LB LoRaWAN Distance Detection Sensor x 1
1164 +* CPL03-LB LoRaWAN Pulse/Contact Sensor
811 811  
812 812  (% style="color:#037691" %)**Dimension and weight**:
813 813  
... ... @@ -819,7 +819,7 @@
819 819  
820 820  * Weight / pcs : g
821 821  
822 -= 10. Support =
1176 += 9. Support =
823 823  
824 824  
825 825  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20230612170349-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -164.2 KB
Content
image-20230612170943-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.4 KB
Content
image-20230612171032-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.4 KB
Content
image-20230613100900-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -184.0 KB
Content
image-20230613102426-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -89.3 KB
Content
image-20230613102459-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -89.3 KB
Content
image-20230613133647-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -213.6 KB
Content
image-20230613133716-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.8 KB
Content
image-20230613140115-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -92.1 KB
Content
image-20230613140140-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -92.1 KB
Content
image-20230613143052-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -21.8 KB
Content
image-20230613143125-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -24.7 KB
Content