Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 79.19
edited by Xiaoling
on 2023/06/13 15:52
Change comment: There is no comment for this version
To version 67.3
edited by Xiaoling
on 2023/05/30 14:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DDS20-LB -- LoRaWAN Ultrasonic Liquid Level Sensor User Manual
1 +SW3L-LB -- LoRaWAN Flow Sensor User Manual
Content
... ... @@ -1,13 +1,10 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230613133716-2.png||height="717" width="717"]]
2 +[[image:image-20230530140053-1.jpeg||height="645" width="645"]]
3 3  
4 4  
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 11  **Table of Contents：**
12 12  
13 13  {{toc/}}
... ... @@ -19,26 +19,27 @@
19 19  
20 20  = 1. Introduction =
21 21  
22 -== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
19 +== 1.1 What is SW3L-LB LoRaWAN Flow Sensor ==
23 23  
24 24  
25 -The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
22 +The Dragino SW3L-LB is a (% style="color:blue" %)**LoRaWAN Flow Sensor**(%%). It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to(% style="color:blue" %)** monitor the water usage for buildings.**
26 26  
27 -The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
24 +The SW3L-LB will send water flow volume every 20 minutes. It can also (% style="color:blue" %)**detect the water flow status**(%%) and (% style="color:blue" %)**send Alarm**(%%), to avoid the waste for water usage such as broken toilet case.
28 28  
29 -DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
26 +SW3L-LB is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
30 30  
31 -The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +The LoRa wireless technology used in SW3L-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 32  
33 -DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 +SW3L-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 34  
35 -DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32 +SW3L-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36 36  
37 -Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 +Each SW3L-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
38 38  
39 -[[image:image-20230613140115-3.png||height="453" width="800"]]
40 40  
37 +[[image:image-20230530135919-1.png||height="404" width="806"]]
41 41  
39 +
42 42  == 1.2 ​Features ==
43 43  
44 44  
... ... @@ -45,20 +45,17 @@
45 45  * LoRaWAN 1.0.3 Class A
46 46  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
47 47  * Ultra-low power consumption
48 -* Liquid Level Measurement by Ultrasonic technology
49 -* Measure through container, No need to contact Liquid
50 -* Valid level range 20mm - 2000mm
51 -* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
52 -* Cable Length : 25cm
46 +* Open/Close detect
47 +* Open/Close statistics
48 +* Temperature & Humidity alarm
49 +* supports open alarm feature
50 +* supports Datalog feature
53 53  * Support Bluetooth v5.1 and LoRaWAN remote configure
54 54  * Support wireless OTA update firmware
55 -* AT Commands to change parameters
53 +* Uplink on periodically and open/close event
56 56  * Downlink to change configure
57 -* IP66 Waterproof Enclosure
58 58  * 8500mAh Battery for long term use
59 59  
60 -
61 -
62 62  == 1.3 Specification ==
63 63  
64 64  
... ... @@ -87,430 +87,603 @@
87 87  * Sleep Mode: 5uA @ 3.3v
88 88  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
89 89  
85 +== 1.4 Applications ==
90 90  
91 91  
92 -== 1.4 Suitable Container & Liquid ==
88 +* Open/Close Detection
89 +* Pulse meter application
90 +* Dry Contact Detection
93 93  
92 +== 1.5 Sleep mode and working mode ==
94 94  
95 -* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
96 -* Container shape is regular, and surface is smooth.
97 -* Container Thickness:
98 -** Pure metal material.  2~~8mm, best is 3~~5mm
99 -** Pure non metal material: <10 mm
100 -* Pure liquid without irregular deposition.
101 101  
95 +(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
102 102  
97 +(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
103 103  
104 -(% style="display:none" %)
105 105  
106 -== 1.5 Install DDS20-LB ==
100 +== 1.6 Button & LEDs ==
107 107  
108 108  
109 -(% style="color:blue" %)**Step 1**(%%):  ** Choose the installation point.**
103 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
110 110  
111 -DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
112 112  
113 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
106 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
107 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
108 +|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
109 +If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
110 +Meanwhile, BLE module will be active and user can connect via BLE to configure device.
111 +)))
112 +|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
113 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
114 +(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
115 +Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
116 +)))
117 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
114 114  
119 +== 1.7 BLE connection ==
115 115  
116 -(((
117 -(% style="color:blue" %)**Step 2**(%%):  **Polish the installation point.**
118 -)))
119 119  
120 -(((
121 -For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
122 -)))
122 +CPL03-LB support BLE remote configure.
123 123  
124 -[[image:image-20230613143052-5.png]]
125 125  
125 +BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
126 126  
127 -No polish needed if the container is shine metal surface without paint or non-metal container.
127 +* Press button to send an uplink
128 +* Press button to active device.
129 +* Device Power on or reset.
128 128  
129 -[[image:image-20230613143125-6.png]]
131 +If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
130 130  
131 131  
132 -(((
133 -(% style="color:blue" %)**Step3:   **(%%)**Test the installation point.**
134 -)))
134 +== 1.8 Pin Definitions ==
135 135  
136 -(((
137 -Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
138 -)))
136 +[[image:image-20230523174230-1.png]]
139 139  
140 -(((
141 -It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
142 -)))
143 143  
144 -(((
145 -After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
146 -)))
139 +== 1.9 Mechanical ==
147 147  
148 148  
149 -(((
150 -(% style="color:blue" %)**LED Status:**
151 -)))
142 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
152 152  
153 -* (((
154 -**Onboard LED**: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
155 -)))
156 156  
157 -* (((
158 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
159 -)))
160 -* (((
161 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
162 -)))
145 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
163 163  
164 -(((
165 -LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
166 -)))
167 167  
148 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
168 168  
169 -(((
170 -(% style="color:red" %)**Note :**(%%)** (% style="color:blue" %)Ultrasonic coupling paste(%%)**(% style="color:blue" %) (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
171 -)))
172 172  
151 += 2. Configure CPL03-LB to connect to LoRaWAN network =
173 173  
174 -(((
175 -(% style="color:blue" %)**Step4:   **(%%)**Install use Epoxy ab glue.**
176 -)))
153 +== 2.1 How it works ==
177 177  
178 -(((
179 -Prepare Eproxy AB glue.
180 -)))
181 181  
182 -(((
183 -Put Eproxy AB glue in the sensor and press it hard on the container installation point.
184 -)))
156 +The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
185 185  
186 -(((
187 -Reset DDS20-LB and see if the BLUE LED is slowly blinking.
188 -)))
158 +(% style="display:none" %) (%%)
189 189  
190 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
160 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
191 191  
192 192  
193 -(((
194 -(% style="color:red" %)**Note :**
163 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
195 195  
196 -(% style="color:red" %)**1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
197 -)))
165 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
198 198  
199 -(((
200 -(% style="color:red" %)**2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
201 -)))
167 +[[image:image-20230530135929-2.png||height="404" width="806"]](% style="display:none" %)
202 202  
203 203  
204 -== 1.6 Applications ==
170 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
205 205  
172 +Each CPL03-LB is shipped with a sticker with the default device EUI as below:
206 206  
207 -* Smart liquid control solution
174 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
208 208  
209 -* Smart liquefied gas solution
210 210  
177 +You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
211 211  
212 212  
213 -== 1.7 Precautions ==
180 +(% style="color:blue" %)**Register the device**
214 214  
182 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
215 215  
216 -* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
217 217  
218 -* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
185 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
219 219  
220 -* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.
187 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
221 221  
222 222  
223 -(% style="display:none" %)
190 +(% style="color:blue" %)**Add APP EUI in the application**
224 224  
225 -== 1.8 Sleep mode and working mode ==
226 226  
193 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
227 227  
228 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
229 229  
230 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
196 +(% style="color:blue" %)**Add APP KEY**
231 231  
198 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
232 232  
233 -== 1.9 Button & LEDs ==
234 234  
201 +(% style="color:blue" %)**Step 2:**(%%) Activate on CPL03-LB
235 235  
236 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
237 237  
204 +Press the button for 5 seconds to activate the CPL03-LB.
238 238  
206 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
207 +
208 +After join success, it will start to upload messages to TTN and you can see the messages in the panel.
209 +
210 +
211 +== 2.3 ​Uplink Payload ==
212 +
213 +=== 2.3.1 Device Status, FPORT~=5 ===
214 +
215 +
216 +Users can use the downlink command(**0x26 01**) to ask CPL03-LB to send device configure detail, include device configure status. CPL03-LB will uplink a payload via FPort=5 to server.
217 +
218 +The Payload format is as below.
219 +
220 +
239 239  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
240 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
241 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
242 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
243 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
244 -)))
245 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
246 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
247 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
248 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
249 -)))
250 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
222 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
223 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
224 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
251 251  
226 +Example parse in TTNv3
252 252  
228 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652859749264-179.png?width=723&height=275&rev=1.1||alt="1652859749264-179.png"]]
253 253  
254 -== 1.10 BLE connection ==
255 255  
231 +(% style="color:#037691" %)**Sensor Model**(%%): For CPL03-LB, this value is 0x0A
256 256  
257 -DDS20-LB support BLE remote configure.
233 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
258 258  
259 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
235 +(% style="color:#037691" %)**Frequency Band**:
260 260  
261 -* Press button to send an uplink
262 -* Press button to active device.
263 -* Device Power on or reset.
237 +*0x01: EU868
264 264  
265 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
239 +*0x02: US915
266 266  
241 +*0x03: IN865
267 267  
268 -== 1.11 Pin Definitions ==
243 +*0x04: AU915
269 269  
270 -[[image:image-20230523174230-1.png]]
245 +*0x05: KZ865
271 271  
247 +*0x06: RU864
272 272  
273 -== 1.12 Mechanical ==
249 +*0x07: AS923
274 274  
251 +*0x08: AS923-1
275 275  
276 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
253 +*0x09: AS923-2
277 277  
255 +*0x0a: AS923-3
278 278  
279 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
257 +*0x0b: CN470
280 280  
259 +*0x0c: EU433
281 281  
282 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
261 +*0x0d: KR920
283 283  
263 +*0x0e: MA869
284 284  
285 -(% style="color:blue" %)**Probe Mechanical:**
286 286  
287 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
266 +(% style="color:#037691" %)**Sub-Band**:
288 288  
268 +AU915 and US915:value 0x00 ~~ 0x08
289 289  
290 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
270 +CN470: value 0x0B ~~ 0x0C
291 291  
272 +Other Bands: Always 0x00
292 292  
293 -= 2. Configure DDS20-LB to connect to LoRaWAN network =
294 294  
295 -== 2.1 How it works ==
275 +(% style="color:#037691" %)**Battery Info**:
296 296  
277 +Check the battery voltage.
297 297  
298 -The DDS20-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS20-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
279 +Ex1: 0x0B45 = 2885mV
299 299  
300 -(% style="display:none" %) (%%)
281 +Ex2: 0x0B49 = 2889mV
301 301  
302 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
303 303  
284 +=== 2.3.2 Sensor Configuration, FPORT~=4 ===
304 304  
305 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
306 306  
307 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
287 +CPL03-LB will only send this command after getting the downlink command (0x26 02) from the server.
308 308  
309 -[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
289 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
290 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
291 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**|(% style="width:158px" %)**1**
292 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: sec)|(% style="width:158px" %)Trigger mode
310 310  
294 +* (((
295 +(% style="color:#037691" %)** TDC: (default: 0x001C20)**
296 +)))
311 311  
312 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS20-LB.
298 +(((
299 +Uplink interval for the total pulse count, default value is 0x001C20 which is 7200 seconds = 2 hours.
313 313  
314 -Each DDS20-LB is shipped with a sticker with the default device EUI as below:
301 +
302 +)))
315 315  
316 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
304 +* (((
305 +(% style="color:#037691" %)** Disalarm: (default: 0)**
306 +)))
317 317  
308 +(((
309 +(% style="color:blue" %)** If Disalarm = 1**(%%), CPL03-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
310 +)))
318 318  
319 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
312 +(((
313 +(% style="color:blue" %)** If Disalarm = 0**(%%), CPL03-LB will send uplink at every TDC periodically.
320 320  
315 +
316 +)))
321 321  
322 -(% style="color:blue" %)**Register the device**
318 +* (((
319 +(% style="color:#037691" %)** Keep Status & Keep Time**
320 +)))
323 323  
324 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
322 +(((
323 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.5AlarmBaseonTimeout"]]
325 325  
325 +
326 +)))
326 326  
327 -(% style="color:blue" %)**Add APP EUI and DEV EUI**
328 +* (((
329 +(% style="color:#037691" %)** Trigger mode (default: 0)**
330 +)))
328 328  
329 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
332 +(((
333 +(% style="color:blue" %)** If Trigger mode = 0**(%%), count close to open event.
334 +)))
330 330  
336 +(((
337 +(% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
338 +)))
331 331  
332 -(% style="color:blue" %)**Add APP EUI in the application**
340 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860064987-743.png?width=730&height=152&rev=1.1||alt="1652860064987-743.png"]]
333 333  
334 334  
335 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
343 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860079526-831.png?width=729&height=209&rev=1.1||alt="1652860079526-831.png"]]
336 336  
337 337  
338 -(% style="color:blue" %)**Add APP KEY**
346 +=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
339 339  
340 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
341 341  
349 +(((
350 +(((
351 +CPL03-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL03-LB will:
352 +)))
353 +)))
342 342  
343 -(% style="color:blue" %)**Step 2:**(%%) Activate on DDS20-LB
355 +(((
356 +(((
357 +periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
358 +)))
359 +)))
344 344  
361 +(((
362 +(((
363 +Uplink Payload totals 11 bytes.
364 +)))
365 +)))
345 345  
346 -Press the button for 5 seconds to activate the DDS20-LB.
367 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
368 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
369 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
370 +|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
347 347  
348 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
372 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
373 +|=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
374 +|(% style="width:60px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:228px" %)**1**|(% style="width:146px" %)**1**
375 +|(% style="width:76px" %)Value|(% style="width:80px" %)Calculate Flag|(% style="width:208px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:136px" %)Contact Status: 0: Open, 1: Close
349 349  
350 -After join success, it will start to upload messages to TTN and you can see the messages in the panel.
377 +* (((
378 +(% style="color:#037691" %)** Calculate Flag**
379 +)))
351 351  
381 +(((
382 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
383 +)))
352 352  
353 -== 2.3  ​Uplink Payload ==
385 +(((
386 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
387 +)))
354 354  
389 +(((
390 +Default value: 0. 
391 +)))
355 355  
356 356  (((
357 -DDS20-LB will uplink payload via LoRaWAN with below payload format: 
394 +Range (6 bits): (b)000000 ~~ (b) 111111
358 358  )))
359 359  
360 360  (((
361 -Uplink payload includes in total 8 bytes.
398 +Refer: [[Set Calculate Flag>>||anchor="H3.3.8Setthecalculateflag"]]
399 +
400 +
362 362  )))
363 363  
364 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
365 -|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
366 -**Size(bytes)**
367 -)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
368 -|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
369 -[[Distance>>||anchor="H2.3.2A0Distance"]]
370 -(unit: mm)
371 -)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
372 -[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
373 -)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
403 +* (((
404 +(% style="color:#037691" %)** Alarm**
405 +)))
374 374  
375 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
407 +(((
408 +See [[Alarm Base on Timeout>>||anchor="H3.3.5AlarmBaseonTimeout"]]
376 376  
410 +
411 +)))
377 377  
378 -=== 2.3.1  Battery Info ===
413 +* (((
414 +(% style="color:#037691" %)** Contact Status**
415 +)))
379 379  
417 +(((
418 +0: Open
419 +)))
380 380  
381 -Check the battery voltage for DDS20-LB.
421 +(((
422 +1: Close
382 382  
383 -Ex1: 0x0B45 = 2885mV
424 +
425 +)))
384 384  
385 -Ex2: 0x0B49 = 2889mV
427 +* (((
428 +(% style="color:#037691" %)** Total pulse**
429 +)))
386 386  
431 +(((
432 +Total pulse/counting base on dry [[contact trigger event>>||anchor="H2.3.2SensorConfiguration2CFPORT3D4"]]
433 +)))
387 387  
388 -=== 2.3.2  Distance ===
435 +(((
436 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
389 389  
438 +
439 +)))
390 390  
441 +* (((
442 +(% style="color:#037691" %)** The last open duration**
443 +)))
444 +
391 391  (((
392 -Get the distance. Flat object range 20mm - 2000mm.
446 +Dry Contact last open duration.
393 393  )))
394 394  
395 395  (((
396 -For example, if the data you get from the register is **0x06 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
450 +Unit: min.
451 +)))
397 397  
398 -(% style="color:blue" %)**0605(H) = 1541 (D) = 1541 mm.**
453 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860403792-491.png?width=735&height=153&rev=1.1||alt="1652860403792-491.png"]]
454 +
455 +
456 +=== 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
457 +
458 +
459 +(% style="color:red" %)**Note:**
460 +
461 +* Firmware support for this mode is not released. If users want to test, please contact Dragino support.
462 +* Users need to run (% style="color:blue" %)**AT+MOD=3**(%%) to support this model after updating the firmware.
463 +* This mode doesn't support Historical Events and Datalog features.
464 +
465 +(% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
466 +
467 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-1.png?width=720&height=628&rev=1.1||alt="image-20221013153352-1.png"]]
468 +
469 +
470 +(% style="color:blue" %)**Payload:**
471 +
472 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-2.png?width=1215&height=167&rev=1.1||alt="image-20221013153352-2.png"]]
473 +
474 +
475 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
476 +|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:61px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**3**
477 +|(% style="width:93px" %)Value|(% style="width:59px" %)Status|(% style="width:98px" %)(((
478 +Port1 Total Pulse(PB14)
479 +)))|(% style="width:96px" %)(((
480 +Port2 Total Pulse(PB15)
481 +)))|(% style="width:94px" %)(((
482 +Port3 Total Pulse(PA4)
399 399  )))
400 400  
401 -* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
485 +(% style="color:blue" %)**Status:**
402 402  
403 -* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
487 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:257px" %)
488 +|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**6**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**
489 +|(% style="width:75px" %)Value|(% style="width:111px" %)Calculate Flag|(% style="width:68px" %)Reserve
404 404  
491 +(% style="color:red" %)**Max COUNT for each port is 16777215. Exceed this number will reset to 1.**
405 405  
406 406  
407 -=== 2.3.3  Interrupt Pin ===
494 +(% style="color:blue" %)**Related AT Command:**
408 408  
496 +(% style="color:#037691" %)**AT+TTRMOD1:  Port1 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
409 409  
410 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
498 + AT+TTRMOD1=0  Downlink Command: 0xA4 01 00
411 411  
412 -**Example:**
500 + AT+TTRMOD1=1  Downlink Command: 0xA4 01 01
413 413  
414 -0x00: Normal uplink packet.
415 415  
416 -0x01: Interrupt Uplink Packet.
503 +(% style="color:#037691" %)**AT+TTRMOD2:  Port2 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
417 417  
505 + AT+TTRMOD1=0  Downlink Command: 0xA4 02 00
418 418  
419 -=== 2.3.4  DS18B20 Temperature sensor ===
507 + AT+TTRMOD1=1  Downlink Command: 0xA4 02 01
420 420  
421 421  
422 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
510 +(% style="color:#037691" %)**AT+TTRMOD3:  Port3 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
423 423  
424 -**Example**:
512 + AT+TTRMOD1=0  Downlink Command: 0xA4 03 00
425 425  
426 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
514 + AT+TTRMOD1=1  Downlink Command: 0xA4 03 01
427 427  
428 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
429 429  
517 +(% style="color:#037691" %)**AT+CALCFLAG:  Calculate Flag ( Default : 0 )**
430 430  
431 -=== 2.3.5  Sensor Flag ===
519 + AT+CALCFLAG=aa
432 432  
433 433  
522 +(% style="color:blue" %)**Downlink Command: 0xA5 aa**
523 +
524 +(% style="color:#037691" %)**AT+COUNTMOD:  Accumulative Mode;  0: Accumulative (Default),1: Reset after uplink.**
525 +
526 + AT+COUNTMOD=0 Downlink Command: 0x0B 00
527 +
528 + AT+COUNTMOD=1 Downlink Command: 0x0B 01
529 +
530 +
531 +(% style="color:#037691" %)**AT+SETCNT:  Set count value**
532 +
533 + AT+SETCNT=1,aa  Downlink Command: 0xA6 01 aa aa aa
534 +
535 + AT+SETCNT=2,aa  Downlink Command: 0xA6 02 aa aa aa
536 +
537 + AT+SETCNT=3,aa  Downlink Command: 0xA6 03 aa aa aa
538 +
539 +
540 +(% style="color:blue" %)**Decode:  **(%%)[[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
541 +
542 +
543 +=== 2.3.5 Historical Door Open/Close Event, FPORT~=3 ===
544 +
545 +
434 434  (((
435 -0x01: Detect Ultrasonic Sensor
547 +CPL03-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
436 436  )))
437 437  
438 438  (((
439 -0x00: No Ultrasonic Sensor
551 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
440 440  )))
441 441  
554 +* (((
555 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL03-LB will send max bytes according to the current DR and Frequency bands.
556 +)))
442 442  
443 -=== 2.3.6  Decode payload in The Things Network ===
558 +(((
559 +For example, in the US915 band, the max payload for different DR is:
560 +)))
444 444  
562 +(((
563 +a) (% style="color:blue" %)**DR0**(%%): max is 11 bytes so one entry of data
564 +)))
445 445  
446 -While using TTN network, you can add the payload format to decode the payload.
566 +(((
567 +b) (% style="color:blue" %)**DR1**(%%): max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
568 +)))
447 447  
448 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
570 +(((
571 +c) (% style="color:blue" %)**DR2**(%%): total payload includes 11 entries of data
572 +)))
449 449  
450 -The payload decoder function for TTN V3 is here:
574 +(((
575 +d) (% style="color:blue" %)**DR3**(%%): total payload includes 22 entries of data.
576 +)))
451 451  
452 452  (((
453 -DDS20-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
579 +If CPL03-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
580 +
581 +
454 454  )))
455 455  
584 +(% style="color:blue" %)** Downlink:**
456 456  
457 -== 2.4  Uplink Interval ==
586 +(% class="box" %)
587 +(((
588 +**0x31 61 E9 3A D4 61 E9 3D E0 05**
589 +)))
458 458  
591 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861353248-624.png?width=720&height=189&rev=1.1||alt="1652861353248-624.png"]]
459 459  
460 -The DDS20-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
461 461  
594 +(% style="color:blue" %)** Uplink:**
462 462  
463 -== 2.5  ​Show Data in DataCake IoT Server ==
596 +(% class="box" %)
597 +(((
598 +**0E 00 23 E6 00 00 00 61 E9 3B 04 0E 00 23 E6 00 00 00 61 E9 3B 25 0D 00 00 00 00 00 00 61 E9 3B C8 0E 00 00 02 00 00 00 61 E9 3B D4 0E 00 00 06 00 00 00 61 E9 3B DB 01 00 00 00 00 00 00 61 E9 3C 91 01 00 00 00 00 00 00 61 E9 3C A1 0D 00 00 00 00 00 00 61 E9 3C BC 0E 00 00 07 00 00 00 61 E9 3C D6 00 00 00 00 00 00 00 61 E9 3D A6**
599 +)))
464 464  
601 +(% style="color:#037691" %)** **
465 465  
603 +(% style="color:#037691" %)**Parsed Value:**
604 +
466 466  (((
467 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
606 +[ALARM, PIN_STATUS, TOTAL_PULSE, CALCULATE_FLAG, LAST_OPEN_DURATION, TIME]
468 468  )))
469 469  
609 +(((
610 +
611 +)))
470 470  
471 471  (((
472 -(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
614 +[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:35:48],
473 473  )))
474 474  
475 475  (((
476 -(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
618 +[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:36:21],
477 477  )))
478 478  
621 +(((
622 +[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:39:04],
623 +)))
479 479  
480 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
625 +(((
626 +[TRUE, CLOSE, 2, 3, 0, 2022-01-20 10:39:16],
627 +)))
481 481  
629 +(((
630 +[TRUE, CLOSE, 6, 3, 0, 2022-01-20 10:39:23],
631 +)))
482 482  
483 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
633 +(((
634 +[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:25],
635 +)))
484 484  
637 +(((
638 +[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:41],
639 +)))
485 485  
486 -(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
641 +(((
642 +[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:43:08],
643 +)))
487 487  
488 -(% style="color:blue" %)**Step 4**(%%)**: Search the DDS20-LB and add DevEUI.**
645 +(((
646 +[TRUE, CLOSE, 7, 3, 0, 2022-01-20 10:43:34],
647 +)))
489 489  
490 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
649 +(((
650 +[FALSE, CLOSE, 0, 0, 0, 2022-01-20 10:47:02],
491 491  
652 +
653 +)))
492 492  
493 -After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
655 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861480446-216.png?rev=1.1||alt="1652861480446-216.png"]]
494 494  
495 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
496 496  
658 +== 2.4 Payload Decoder file ==
497 497  
498 -== 2.6 Datalog Feature ==
499 499  
661 +In TTN, use can add a custom payload so it shows friendly reading
500 500  
501 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS20-LB will store the reading for future retrieving purposes.
663 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
502 502  
503 503  
504 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
666 +== 2.5 Datalog Feature ==
505 505  
506 506  
507 -Set PNACKMD=1, DDS20-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS20-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
669 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
508 508  
671 +
672 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
673 +
674 +
675 +Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
676 +
509 509  * (((
510 -a) DDS20-LB will do an ACK check for data records sending to make sure every data arrive server.
678 +a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
511 511  )))
512 512  * (((
513 -b) DDS20-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS20-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS20-LB gets a ACK, DDS20-LB will consider there is a network connection and resend all NONE-ACK messages.
681 +b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
514 514  )))
515 515  
516 516  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -518,10 +518,10 @@
518 518  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
519 519  
520 520  
521 -=== 2.6.2 Unix TimeStamp ===
689 +=== 2.5.2 Unix TimeStamp ===
522 522  
523 523  
524 -DDS20-LB uses Unix TimeStamp format based on
692 +CPL03-LB uses Unix TimeStamp format based on
525 525  
526 526  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
527 527  
... ... @@ -535,17 +535,17 @@
535 535  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
536 536  
537 537  
538 -=== 2.6.3 Set Device Time ===
706 +=== 2.5.3 Set Device Time ===
539 539  
540 540  
541 541  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
542 542  
543 -Once DDS20-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS20-LB. If DDS20-LB fails to get the time from the server, DDS20-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
711 +Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
544 544  
545 545  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
546 546  
547 547  
548 -=== 2.6.4 Poll sensor value ===
716 +=== 2.5.4 Poll sensor value ===
549 549  
550 550  
551 551  Users can poll sensor values based on timestamps. Below is the downlink command.
... ... @@ -568,7 +568,7 @@
568 568  )))
569 569  
570 570  (((
571 -Uplink Internal =5s，means DDS20-LB will send one packet every 5s. range 5~~255s.
739 +Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
572 572  )))
573 573  
574 574  
... ... @@ -575,26 +575,22 @@
575 575  == 2.7 Frequency Plans ==
576 576  
577 577  
578 -The DDS20-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
746 +The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
579 579  
580 580  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
581 581  
582 582  
583 -= 3. Configure DDS20-LB =
751 += 3. Configure CPL03-LB =
584 584  
585 585  == 3.1 Configure Methods ==
586 586  
587 587  
588 -DDS20-LB supports below configure method:
756 +CPL03-LB supports below configure method:
589 589  
590 590  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
591 -
592 592  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
593 -
594 594  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
595 595  
596 -
597 -
598 598  == 3.2 General Commands ==
599 599  
600 600  
... ... @@ -601,7 +601,6 @@
601 601  These commands are to configure:
602 602  
603 603  * General system settings like: uplink interval.
604 -
605 605  * LoRaWAN protocol & radio related command.
606 606  
607 607  They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
... ... @@ -609,10 +609,10 @@
609 609  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
610 610  
611 611  
612 -== 3.3 Commands special design for DDS20-LB ==
775 +== 3.3 Commands special design for CPL03-LB ==
613 613  
614 614  
615 -These commands only valid for DDS20-LB, as below:
778 +These commands only valid for CPL03-LB, as below:
616 616  
617 617  
618 618  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -654,15 +654,226 @@
654 654  Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
655 655  )))
656 656  * (((
657 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
820 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
658 658  
659 659  
660 660  
661 661  )))
662 662  
663 -=== 3.3.2 Set Interrupt Mode ===
826 +=== 3.3.2 Quit AT Command ===
664 664  
665 665  
829 +Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
830 +
831 +(% style="color:blue" %)**AT Command: AT+DISAT**
832 +
833 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
834 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
835 +|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
836 +
837 +(% style="color:blue" %)**Downlink Command:**
838 +
839 +No downlink command for this feature.
840 +
841 +
842 +=== 3.3.3 Get Device Status ===
843 +
844 +
845 +Send a LoRaWAN downlink to ask device send Alarm settings.
846 +
847 +(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
848 +
849 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
850 +
851 +
852 +=== 3.3.4 Enable / Disable Alarm ===
853 +
854 +
855 +Feature: Enable/Disable Alarm for open/close event. Default value 0.
856 +
857 +(% style="color:blue" %)**AT Command:**
858 +
859 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
860 +|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
861 +|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
862 +|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
863 +
864 +(% style="color:blue" %)**Downlink Command:**
865 +
866 +**0xA7 01**  ~/~/  Same As AT+DISALARM=1
867 +
868 +**0xA7 00    ** ~/~/  Same As AT+DISALARM=0
869 +
870 +
871 +=== 3.3.5 Alarm Base on Timeout ===
872 +
873 +
874 +(((
875 +CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
876 +)))
877 +
878 +
879 +(((
880 +(% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
881 +)))
882 +
883 +(((
884 +**Keep Status = 1**: Monitor Close to Open event
885 +)))
886 +
887 +(((
888 +**Keep Status = 0**: Monitor Open to Close event
889 +)))
890 +
891 +
892 +(((
893 +(% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
894 +)))
895 +
896 +(((
897 +Range 0 ~~ 65535(0xFFFF) seconds.
898 +)))
899 +
900 +(((
901 +If** keep time = 0**, Disable Alarm Base on Timeout feature.
902 +)))
903 +
904 +(((
905 +If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
906 +)))
907 +
908 +
909 +(((
910 +(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
911 +)))
912 +
913 +(((
914 +(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
915 +)))
916 +
917 +(((
918 +(% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
919 +)))
920 +
921 +
922 +(((
923 +(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
924 +)))
925 +
926 +(((
927 +**Command: 0xA9 aa bb cc**
928 +)))
929 +
930 +(((
931 +**A9: **Command Type Code
932 +)))
933 +
934 +(((
935 +**aa: **status to be monitored
936 +)))
937 +
938 +(((
939 +**bb cc: **timeout.
940 +)))
941 +
942 +
943 +(((
944 +If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
945 +)))
946 +
947 +(((
948 +Or
949 +)))
950 +
951 +(((
952 +0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
953 +)))
954 +
955 +
956 +=== 3.3.6 Clear Flash Record ===
957 +
958 +
959 +Feature: Clear flash storage for data log feature.
960 +
961 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
962 +
963 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
964 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
965 +|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
966 +
967 +(((
968 +(% style="color:blue" %)**Downlink Command:**
969 +)))
970 +
971 +(((
972 +* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
973 +)))
974 +
975 +
976 +
977 +=== 3.3.7 Set trigger mode ===
978 +
979 +
980 +Feature: Set the trigger interrupt mode.
981 +
982 +(% style="color:blue" %)**AT Command: AT+TTRMOD**
983 +
984 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
985 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
986 +|(% style="width:157px" %)(((
987 +AT+TTRMOD=1
988 +)))|(% style="width:156px" %)Count and trigger from open to close (rising edge)|(% style="width:89px" %)(((
989 +(((
990 +OK
991 +)))
992 +)))
993 +|(% style="width:157px" %)(((
994 +AT+TTRMOD=0
995 +)))|(% style="width:156px" %)Count and trigger from close to open (falling edge)|(% style="width:89px" %)(((
996 +OK
997 +)))
998 +
999 +(% style="color:blue" %)**Downlink Command:**
1000 +
1001 +* **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
1002 +
1003 +=== 3.3.8 Set the calculate flag ===
1004 +
1005 +
1006 +Feature: Set the calculate flag
1007 +
1008 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
1009 +
1010 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
1011 +|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1012 +|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
1013 +|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
1014 +
1015 +(% style="color:blue" %)**Downlink Command:**
1016 +
1017 +* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
1018 +
1019 +=== 3.3.9 Set count number ===
1020 +
1021 +
1022 +Feature: Manually set the count number
1023 +
1024 +(% style="color:blue" %)**AT Command: AT+SETCNT**
1025 +
1026 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
1027 +|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1028 +|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
1029 +|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
1030 +
1031 +(% style="color:blue" %)**Downlink Command:**
1032 +
1033 +* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
1034 +
1035 +* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
1036 +
1037 +=== 3.3.10 Set Interrupt Mode ===
1038 +
1039 +
666 666  Feature, Set Interrupt mode for PA8 of pin.
667 667  
668 668  When AT+INTMOD=0 is set, PA8 is used as a digital input port.
... ... @@ -694,83 +694,78 @@
694 694  
695 695  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
696 696  
1071 +=== 3.3.11 Set Power Output Duration ===
697 697  
698 698  
699 -= 4. Battery & Power Consumption =
1074 +Control the output duration 5V . Before each sampling, device will
700 700  
1076 +~1. first enable the power output to external sensor,
701 701  
702 -DDS20-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1078 +2. keep it on as per duration, read sensor value and construct uplink payload
703 703  
704 -[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1080 +3. final, close the power output.
705 705  
1082 +(% style="color:blue" %)**AT Command: AT+5VT**
706 706  
707 -= 5. OTA Firmware update =
1084 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1085 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1086 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
1087 +OK
1088 +|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
708 708  
1090 +(% style="color:blue" %)**Downlink Command: 0x07**
709 709  
710 -(% class="wikigeneratedid" %)
711 -User can change firmware DDS20-LB to:
1092 +Format: Command Code (0x07) followed by 2 bytes.
712 712  
713 -* Change Frequency band/ region.
1094 +The first and second bytes are the time to turn on.
714 714  
715 -* Update with new features.
1096 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
716 716  
717 -* Fix bugs.
1098 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
718 718  
719 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
1100 += 4. Battery & Power Consumption =
720 720  
721 -Methods to Update Firmware:
722 722  
723 -* (Recommanded way) OTA firmware update via wireless:  **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1103 +CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
724 724  
725 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1105 +[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
726 726  
727 727  
1108 += 5. OTA Firmware update =
728 728  
729 -= 6. FAQ =
730 730  
731 -== 6.1  What is the frequency plan for DDS20-LB? ==
1111 +(% class="wikigeneratedid" %)
1112 +User can change firmware CPL03-LB to:
732 732  
1114 +* Change Frequency band/ region.
733 733  
734 -DDS20-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
1116 +* Update with new features.
735 735  
1118 +* Fix bugs.
736 736  
737 -== 6.2  Can I use DDS20-LB in condensation environment? ==
1120 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
738 738  
1122 +Methods to Update Firmware:
739 739  
740 -DDS20-LB is not suitable to be used in condensation environment. Condensation on the DDS20-LB probe will affect the reading and always got 0.
1124 +* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
741 741  
1126 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
742 742  
743 -= 7.  Trouble Shooting =
1128 += 6. FAQ =
744 744  
745 -== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
1130 +== 6.1  AT Commands input doesn't work ==
746 746  
747 747  
748 -It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
1133 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
749 749  
750 750  
751 -== 7.2  AT Command input doesn't work ==
1136 += 7. Order Info =
752 752  
753 753  
754 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1139 +Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
755 755  
1141 +(% style="color:red" %)**XXX**(%%): The default frequency band
756 756  
757 -== 7.3  Why i always see 0x0000 or 0 for the distance value? ==
758 -
759 -
760 -(((
761 -LDDS20 has a strict [[**installation requirement**>>||anchor="H1.5A0InstallDDS20-LB"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.
762 -
763 -If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.
764 -)))
765 -
766 -
767 -= 8. Order Info =
768 -
769 -
770 -Part Number: (% style="color:blue" %)**DDS20-LB-XXX**
771 -
772 -(% style="color:red" %)**XXX**(%%): **The default frequency band**
773 -
774 774  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
775 775  
776 776  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
... ... @@ -787,14 +787,12 @@
787 787  
788 788  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
789 789  
1159 += 8. ​Packing Info =
790 790  
791 791  
792 -= 9. ​Packing Info =
793 -
794 -
795 795  (% style="color:#037691" %)**Package Includes**:
796 796  
797 -* DDS20-LB LoRaWAN Ultrasonic Liquid Level Sensor x 1
1164 +* CPL03-LB LoRaWAN Pulse/Contact Sensor
798 798  
799 799  (% style="color:#037691" %)**Dimension and weight**:
800 800  
... ... @@ -806,11 +806,9 @@
806 806  
807 807  * Weight / pcs : g
808 808  
1176 += 9. Support =
809 809  
810 810  
811 -= 10. Support =
812 -
813 -
814 814  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
815 815  
816 816  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
image-20230612170349-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -164.2 KB
Content
image-20230612170943-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.4 KB
Content
image-20230612171032-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.4 KB
Content
image-20230613100900-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -184.0 KB
Content
image-20230613102426-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -89.3 KB
Content
image-20230613102459-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -89.3 KB
Content
image-20230613133647-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -213.6 KB
Content
image-20230613133716-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.8 KB
Content
image-20230613140115-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -92.1 KB
Content
image-20230613140140-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -92.1 KB
Content
image-20230613143052-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -21.8 KB
Content
image-20230613143125-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -24.7 KB
Content