Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 79.17
edited by Xiaoling
on 2023/06/13 15:47
Change comment: There is no comment for this version
To version 116.1
edited by kai
on 2023/11/11 17:02
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DDS20-LB -- LoRaWAN Ultrasonic Liquid Level Sensor User Manual
1 +DS20L -- LoRaWAN Smart Distance Detector User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.kai
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230613133716-2.png||height="717" width="717"]]
2 +[[image:image-20231110085342-2.png||height="481" width="481"]]
3 3  
4 4  
5 5  
... ... @@ -19,437 +19,426 @@
19 19  
20 20  = 1. Introduction =
21 21  
22 -== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
22 +== 1.1 What is LoRaWAN Smart Distance Detector ==
23 23  
24 24  
25 -The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
25 +The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN. DS20L can measure range between 3cm ~~ 200cm.
26 26  
27 -The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
27 +DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current 
28 +consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
28 28  
29 -DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
30 +DS20L has a (% style="color:blue" %)**built-in 2400mAh non-chargeable battery**(%%) for long-term use up to several years*. Users can also power DS20L with an external power source for (% style="color:blue" %)**continuous measuring and distance alarm / counting purposes.**
30 30  
31 -The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 +DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
32 32  
33 -DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 34  
35 -DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
35 +[[image:image-20231110102635-5.png||height="402" width="807"]]
36 36  
37 -Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
38 38  
39 -[[image:image-20230613140115-3.png||height="453" width="800"]]
40 -
41 -
42 42  == 1.2 ​Features ==
43 43  
44 44  
45 -* LoRaWAN 1.0.3 Class A
46 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
47 -* Ultra-low power consumption
48 -* Liquid Level Measurement by Ultrasonic technology
49 -* Measure through container, No need to contact Liquid
50 -* Valid level range 20mm - 2000mm
51 -* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
52 -* Cable Length : 25cm
53 -* Support Bluetooth v5.1 and LoRaWAN remote configure
54 -* Support wireless OTA update firmware
41 +* LoRaWAN Class A protocol
42 +* LiDAR distance detector, range 3 ~~ 200cm
43 +* Periodically detect or continuously detect mode
55 55  * AT Commands to change parameters
56 -* Downlink to change configure
57 -* IP66 Waterproof Enclosure
58 -* 8500mAh Battery for long term use
45 +* Remotely configure parameters via LoRaWAN Downlink
46 +* Alarm & Counting mode
47 +* Firmware upgradable via program port or LoRa protocol
48 +* Built-in 2400mAh battery or power by external power source
59 59  
60 -
61 61  == 1.3 Specification ==
62 62  
63 63  
64 -(% style="color:#037691" %)**Common DC Characteristics:**
53 +(% style="color:#037691" %)**LiDAR Sensor:**
65 65  
66 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
67 -* Operating Temperature: -40 ~~ 85°C
55 +* Operation Temperature: -40 ~~ 80 °C
56 +* Operation Humidity: 0~~99.9%RH (no Dew)
57 +* Storage Temperature: -10 ~~ 45°C
58 +* Measure Range: 3cm~~200cm @ 90% reflectivity
59 +* Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
60 +* ToF FoV: ±9°, Total 18°
61 +* Light source: VCSEL
68 68  
69 -(% style="color:#037691" %)**LoRa Spec:**
63 +(% style="display:none" %)
70 70  
71 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
72 -* Max +22 dBm constant RF output vs.
73 -* RX sensitivity: down to -139 dBm.
74 -* Excellent blocking immunity
75 75  
76 -(% style="color:#037691" %)**Battery:**
66 +== 1.4 Power Consumption ==
77 77  
78 -* Li/SOCI2 un-chargeable battery
79 -* Capacity: 8500mAh
80 -* Self-Discharge: <1% / Year @ 25°C
81 -* Max continuously current: 130mA
82 -* Max boost current: 2A, 1 second
83 83  
84 -(% style="color:#037691" %)**Power Consumption**
69 +**Battery Power Mode:**
85 85  
86 -* Sleep Mode: 5uA @ 3.3v
87 -* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
71 +* Idle: 0.003 mA @ 3.3v
72 +* Max : 360 mA
88 88  
89 -== 1.4 Suitable Container & Liquid ==
74 +**Continuously mode**:
90 90  
76 +* Idle: 21 mA @ 3.3v
77 +* Max : 360 mA
91 91  
92 -* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
93 -* Container shape is regular, and surface is smooth.
94 -* Container Thickness:
95 -** Pure metal material.  2~~8mm, best is 3~~5mm
96 -** Pure non metal material: <10 mm
97 -* Pure liquid without irregular deposition.
79 += 2. Configure DS20L to connect to LoRaWAN network =
98 98  
99 -(% style="display:none" %)
81 +== 2.1 How it works ==
100 100  
101 -== 1.5 Install DDS20-LB ==
102 102  
84 +The DS20L is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS20L. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
103 103  
104 -(% style="color:blue" %)**Step 1**(%%):  Choose the installation point.
86 +(% style="display:none" %) (%%)
105 105  
106 -DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
88 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
107 107  
108 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
109 109  
91 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
110 110  
111 -(((
112 -(% style="color:blue" %)**Step 2**(%%):  Polish the installation point.
113 -)))
93 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.(% style="display:none" %)
114 114  
115 -(((
116 -For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
117 -)))
95 +[[image:image-20231110102635-5.png||height="402" width="807"]](% style="display:none" %)
118 118  
119 -[[image:image-20230613143052-5.png]]
97 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS20L.
120 120  
99 +Each DS20L is shipped with a sticker with the default device EUI as below:
121 121  
122 -No polish needed if the container is shine metal surface without paint or non-metal container.
101 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
123 123  
124 -[[image:image-20230613143125-6.png]]
125 125  
104 +You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
126 126  
127 -(((
128 -(% style="color:blue" %)**Step3:   **(%%)Test the installation point.
129 -)))
130 130  
131 -(((
132 -Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
133 -)))
107 +(% style="color:blue" %)**Register the device**
134 134  
135 -(((
136 -It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
137 -)))
109 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
138 138  
139 -(((
140 -After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
141 -)))
142 142  
112 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
143 143  
144 -(((
145 -(% style="color:blue" %)**LED Status:**
146 -)))
114 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
147 147  
148 -* (((
149 -**Onboard LED**: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
150 -)))
151 151  
152 -* (((
153 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
154 -)))
155 -* (((
156 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
157 -)))
117 +(% style="color:blue" %)**Add APP EUI in the application**
158 158  
159 -(((
160 -LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
161 -)))
162 162  
120 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
163 163  
164 -(((
165 -(% style="color:red" %)**Note :**(%%)** (% style="color:blue" %)Ultrasonic coupling paste(%%)**(% style="color:blue" %) (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
166 -)))
167 167  
123 +(% style="color:blue" %)**Add APP KEY**
168 168  
169 -(((
170 -(% style="color:blue" %)**Step4:   **(%%)Install use Epoxy ab glue.
171 -)))
125 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
172 172  
173 -(((
174 -Prepare Eproxy AB glue.
175 -)))
176 176  
177 -(((
178 -Put Eproxy AB glue in the sensor and press it hard on the container installation point.
179 -)))
128 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS20L
180 180  
181 -(((
182 -Reset DDS20-LB and see if the BLUE LED is slowly blinking.
183 -)))
184 184  
185 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
131 +Press the button for 5 seconds to activate the DS20L.
186 186  
133 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
187 187  
188 -(((
189 -(% style="color:red" %)**Note :**
135 +After join success, it will start to upload messages to TTN and you can see the messages in the panel.
190 190  
191 -(% style="color:red" %)**1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
192 -)))
193 193  
194 -(((
195 -(% style="color:red" %)**2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
196 -)))
138 +== 2.3 ​Uplink Payload ==
197 197  
140 +=== 2.3.1 Device Status, FPORT~=5 ===
198 198  
199 -== 1.6 Applications ==
200 200  
143 +Users can use the downlink command(**0x26 01**) to ask DS20L to send device configure detail, include device configure status. DS20L will uplink a payload via FPort=5 to server.
201 201  
202 -* Smart liquid control solution.
145 +The Payload format is as below.
203 203  
204 -* Smart liquefied gas solution.
147 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
148 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
149 +**Size(bytes)**
150 +)))|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**1**|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**2**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 50px;" %)**2**
151 +|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
205 205  
206 -== 1.7 Precautions ==
153 +Example parse in TTNv3
207 207  
155 +[[image:image-20230805103904-1.png||height="131" width="711"]]
208 208  
209 -* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
157 +(% style="color:blue" %)**Sensor Model**(%%): For DS20L, this value is 0x24
210 210  
211 -* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
159 +(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
212 212  
213 -* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.(% style="display:none" %)
161 +(% style="color:blue" %)**Frequency Band**:
214 214  
215 -== 1.8 Sleep mode and working mode ==
163 +0x01: EU868
216 216  
165 +0x02: US915
217 217  
218 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
167 +0x03: IN865
219 219  
220 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
169 +0x04: AU915
221 221  
171 +0x05: KZ865
222 222  
223 -== 1.9 Button & LEDs ==
173 +0x06: RU864
224 224  
175 +0x07: AS923
225 225  
226 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
177 +0x08: AS923-1
227 227  
179 +0x09: AS923-2
228 228  
229 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
230 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
231 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
232 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
233 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
234 -)))
235 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
236 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
237 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
238 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
239 -)))
240 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
181 +0x0a: AS923-3
241 241  
242 -== 1.10 BLE connection ==
183 +0x0b: CN470
243 243  
185 +0x0c: EU433
244 244  
245 -DDS20-LB support BLE remote configure.
187 +0x0d: KR920
246 246  
247 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
189 +0x0e: MA869
248 248  
249 -* Press button to send an uplink
250 -* Press button to active device.
251 -* Device Power on or reset.
191 +(% style="color:blue" %)**Sub-Band**:
252 252  
253 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
193 +AU915 and US915:value 0x00 ~~ 0x08
254 254  
195 +CN470: value 0x0B ~~ 0x0C
255 255  
256 -== 1.11 Pin Definitions ==
197 +Other Bands: Always 0x00
257 257  
258 -[[image:image-20230523174230-1.png]]
199 +(% style="color:blue" %)**Battery Info**:
259 259  
201 +Check the battery voltage.
260 260  
261 -== 1.12 Mechanical ==
203 +Ex1: 0x0B45 = 2885mV
262 262  
205 +Ex2: 0x0B49 = 2889mV
263 263  
264 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
265 265  
208 +=== 2.3.2 Uplink Payload, FPORT~=2 ===
266 266  
267 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
268 268  
211 +(((
212 +DS20L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS20L will:
269 269  
270 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
214 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
271 271  
216 +Uplink Payload totals 11 bytes.
217 +)))
272 272  
273 -(% style="color:blue" %)**Probe Mechanical:**
219 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
220 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
221 +**Size(bytes)**
222 +)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white; width: 80px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**
223 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:62.5px" %)(((
224 +[[Temperature DS18B20>>||anchor="HDS18B20Temperaturesensor"]]
225 +)))|[[Distance>>||anchor="HDistance"]]|[[Distance signal strength>>||anchor="HDistancesignalstrength"]]|(% style="width:122px" %)(((
226 +[[Interrupt flag & Interrupt_level>>||anchor="HInterruptPin26A0InterruptLevel"]]
227 +)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="HLiDARtemp"]]|(% style="width:96px" %)(((
228 +[[Message Type>>||anchor="HMessageType"]]
229 +)))
274 274  
275 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
231 +[[image:image-20230805104104-2.png||height="136" width="754"]]
276 276  
277 277  
278 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
234 +==== (% style="color:blue" %)**Battery Info**(%%) ====
279 279  
280 280  
281 -= 2. Configure DDS20-LB to connect to LoRaWAN network =
237 +Check the battery voltage for DS20L.
282 282  
283 -== 2.1 How it works ==
239 +Ex1: 0x0B45 = 2885mV
284 284  
241 +Ex2: 0x0B49 = 2889mV
285 285  
286 -The DDS20-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS20-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
287 287  
288 -(% style="display:none" %) (%%)
244 +==== (% style="color:blue" %)**DS18B20 Temperature sensor**(%%) ====
289 289  
290 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
291 291  
247 +This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
292 292  
293 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
294 294  
295 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
250 +**Example**:
296 296  
297 -[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
252 +If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
298 298  
254 +If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
299 299  
300 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS20-LB.
301 301  
302 -Each DDS20-LB is shipped with a sticker with the default device EUI as below:
257 +==== (% style="color:blue" %)**Distance**(%%) ====
303 303  
304 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
305 305  
260 +Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
306 306  
307 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
308 308  
263 +**Example**:
309 309  
310 -(% style="color:blue" %)**Register the device**
265 +If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
311 311  
312 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
313 313  
268 +==== (% style="color:blue" %)**Distance signal strength**(%%) ====
314 314  
315 -(% style="color:blue" %)**Add APP EUI and DEV EUI**
316 316  
317 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
271 +Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
318 318  
319 319  
320 -(% style="color:blue" %)**Add APP EUI in the application**
274 +**Example**:
321 321  
276 +If payload is: 01D7(H)=471(D), distance signal strength=471, 471>100,471≠65535, the measured value of Dist is considered credible.
322 322  
323 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
278 +Customers can judge whether they need to adjust the environment based on the signal strength.
324 324  
325 325  
326 -(% style="color:blue" %)**Add APP KEY**
281 +**1) When the sensor detects valid data:**
327 327  
328 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
283 +[[image:image-20230805155335-1.png||height="145" width="724"]]
329 329  
330 330  
331 -(% style="color:blue" %)**Step 2:**(%%) Activate on DDS20-LB
286 +**2) When the sensor detects invalid data:**
332 332  
288 +[[image:image-20230805155428-2.png||height="139" width="726"]]
333 333  
334 -Press the button for 5 seconds to activate the DDS20-LB.
335 335  
336 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
291 +**3) When the sensor is not connected:**
337 337  
338 -After join success, it will start to upload messages to TTN and you can see the messages in the panel.
293 +[[image:image-20230805155515-3.png||height="143" width="725"]]
339 339  
340 340  
341 -== 2.3  ​Uplink Payload ==
296 +==== (% style="color:blue" %)**Interrupt Pin & Interrupt Level**(%%) ====
342 342  
343 343  
344 -(((
345 -DDS20-LB will uplink payload via LoRaWAN with below payload format: 
346 -)))
299 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
347 347  
348 -(((
349 -Uplink payload includes in total 8 bytes.
350 -)))
301 +Note: The Internet Pin is a separate pin in the screw terminal. See pin mapping of GPIO_EXTI .
351 351  
352 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
353 -|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
354 -**Size(bytes)**
355 -)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
356 -|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
357 -[[Distance>>||anchor="H2.3.2A0Distance"]]
358 -(unit: mm)
359 -)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
360 -[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
361 -)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
303 +**Example:**
362 362  
363 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
305 +If byte[0]&0x01=0x00 : Normal uplink packet.
364 364  
307 +If byte[0]&0x01=0x01 : Interrupt Uplink Packet.
365 365  
366 -=== 2.3.1  Battery Info ===
367 367  
310 +==== (% style="color:blue" %)**LiDAR temp**(%%) ====
368 368  
369 -Check the battery voltage for DDS20-LB.
370 370  
371 -Ex1: 0x0B45 = 2885mV
313 +Characterize the internal temperature value of the sensor.
372 372  
373 -Ex2: 0x0B49 = 2889mV
315 +**Example: **
316 +If payload is: 1C(H) <<24>>24=28(D),LiDAR temp=28℃.
317 +If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
374 374  
375 375  
376 -=== 2.3.2  Distance ===
320 +==== (% style="color:blue" %)**Message Type**(%%) ====
377 377  
378 378  
379 379  (((
380 -Get the distance. Flat object range 20mm - 2000mm.
324 +For a normal uplink payload, the message type is always 0x01.
381 381  )))
382 382  
383 383  (((
384 -For example, if the data you get from the register is **0x06 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
328 +Valid Message Type:
329 +)))
385 385  
386 -(% style="color:blue" %)**0605(H) = 1541 (D) = 1541 mm.**
331 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
332 +|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
333 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)Normal Uplink Payload
334 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)Configure Info Payload
335 +
336 +[[image:image-20230805150315-4.png||height="233" width="723"]]
337 +
338 +
339 +=== 2.3.3 Historical measuring distance, FPORT~=3 ===
340 +
341 +
342 +DS20L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
343 +
344 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
345 +
346 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
347 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
348 +**Size(bytes)**
349 +)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD; color: white; width: 85px;" %)**1**|=(% style="background-color: #4F81BD; color: white; width: 85px;" %)4
350 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)Interrupt flag & Interrupt_level|(% style="width:62.5px" %)(((
351 +Reserve(0xFF)
352 +)))|Distance|Distance signal strength|(% style="width:88px" %)(((
353 +LiDAR temp
354 +)))|(% style="width:85px" %)Unix TimeStamp
355 +
356 +**Interrupt flag & Interrupt level:**
357 +
358 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:480px" %)
359 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
360 +**Size(bit)**
361 +)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit7**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit6**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**[bit5:bit2]**|=(% style="width: 90px; background-color: #4F81BD; color: white;" %)**bit1**|=(% style="background-color: #4F81BD; color: white; width: 90px;" %)**bit0**
362 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)No ACK message|(% style="width:62.5px" %)Poll Message Flag|Reserve|(% style="width:91px" %)Interrupt level|(% style="width:88px" %)(((
363 +Interrupt flag
387 387  )))
388 388  
389 -* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
366 +* (((
367 +Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, DS20L will send max bytes according to the current DR and Frequency bands.
368 +)))
390 390  
391 -* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
370 +For example, in the US915 band, the max payload for different DR is:
392 392  
393 -=== 2.3.3  Interrupt Pin ===
372 +**a) DR0:** max is 11 bytes so one entry of data
394 394  
374 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
395 395  
396 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
376 +**c) DR2:** total payload includes 11 entries of data
397 397  
398 -**Example:**
378 +**d) DR3:** total payload includes 22 entries of data.
399 399  
400 -0x00: Normal uplink packet.
380 +If DS20L doesn't have any data in the polling time. It will uplink 11 bytes of 0
401 401  
402 -0x01: Interrupt Uplink Packet.
403 403  
383 +**Downlink:**
404 404  
405 -=== 2.3.4  DS18B20 Temperature sensor ===
385 +0x31 64 CC 68 0C 64 CC 69 74 05
406 406  
387 +[[image:image-20230805144936-2.png||height="113" width="746"]]
407 407  
408 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
389 +**Uplink:**
409 409  
410 -**Example**:
391 +43 FF 0E 10 00 B0 1E 64 CC 68 0C 40 FF 0D DE 00 A8 1E 64 CC 68 29 40 FF 09 92 00 D3 1E 64 CC 68 65 40 FF 02 3A 02 BC 1E 64 CC 68 A1 41 FF 0E 1A 00 A4 1E 64 CC 68 C0 40 FF 0D 2A 00 B8 1E 64 CC 68 E8 40 FF 00 C8 11 6A 1E 64 CC 69 24 40 FF 0E 24 00 AD 1E 64 CC 69 6D
411 411  
412 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
413 413  
414 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
394 +**Parsed Value:**
415 415  
396 +[DISTANCE , DISTANCE_SIGNAL_STRENGTH，LIDAR_TEMP，EXTI_STATUS , EXTI_FLAG , TIME]
416 416  
417 -=== 2.3.5  Sensor Flag ===
418 418  
399 +[360,176,30,High,True,2023-08-04 02:53:00],
419 419  
420 -(((
421 -0x01: Detect Ultrasonic Sensor
422 -)))
401 +[355,168,30,Low,False,2023-08-04 02:53:29],
423 423  
424 -(((
425 -0x00: No Ultrasonic Sensor
426 -)))
403 +[245,211,30,Low,False,2023-08-04 02:54:29],
427 427  
405 +[57,700,30,Low,False,2023-08-04 02:55:29],
428 428  
429 -=== 2.3.6  Decode payload in The Things Network ===
407 +[361,164,30,Low,True,2023-08-04 02:56:00],
430 430  
409 +[337,184,30,Low,False,2023-08-04 02:56:40],
431 431  
432 -While using TTN network, you can add the payload format to decode the payload.
411 +[20,4458,30,Low,False,2023-08-04 02:57:40],
433 433  
434 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
413 +[362,173,30,Low,False,2023-08-04 02:58:53],
435 435  
436 -The payload decoder function for TTN V3 is here:
437 437  
438 -(((
439 -DDS20-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
440 -)))
416 +**History read from serial port：**
441 441  
418 +[[image:image-20230805145056-3.png]]
442 442  
443 -== 2.4  Uplink Interval ==
444 444  
421 +=== 2.3.4 Decode payload in The Things Network ===
445 445  
446 -The DDS20-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
447 447  
424 +While using TTN network, you can add the payload format to decode the payload.
448 448  
449 -== 2.5  ​Show Data in DataCake IoT Server ==
426 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
450 450  
451 451  
452 452  (((
430 +The payload decoder function for TTN is here:
431 +)))
432 +
433 +(((
434 +DS20L TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
435 +)))
436 +
437 +
438 +== 2.4 ​Show Data in DataCake IoT Server ==
439 +
440 +
441 +(((
453 453  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
454 454  )))
455 455  
... ... @@ -471,7 +471,7 @@
471 471  
472 472  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
473 473  
474 -(% style="color:blue" %)**Step 4**(%%)**: Search the DDS20-LB and add DevEUI.**
463 +(% style="color:blue" %)**Step 4**(%%)**: Search the DS20L and add DevEUI.**
475 475  
476 476  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
477 477  
... ... @@ -481,35 +481,29 @@
481 481  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
482 482  
483 483  
473 +== 2.5 Datalog Feature ==
484 484  
485 -== 2.6 Datalog Feature ==
486 486  
476 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS20L will store the reading for future retrieving purposes.
487 487  
488 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS20-LB will store the reading for future retrieving purposes.
489 489  
479 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
490 490  
491 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
492 492  
482 +Set PNACKMD=1, DS20L will wait for ACK for every uplink, when there is no LoRaWAN network, DS20L will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
493 493  
494 -Set PNACKMD=1, DDS20-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS20-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
495 -
496 496  * (((
497 -a) DDS20-LB will do an ACK check for data records sending to make sure every data arrive server.
485 +a) DS20L will do an ACK check for data records sending to make sure every data arrive server.
498 498  )))
499 499  * (((
500 -b) DDS20-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS20-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS20-LB gets a ACK, DDS20-LB will consider there is a network connection and resend all NONE-ACK messages.
488 +b) DS20L will send data in **CONFIRMED Mode** when PNACKMD=1, but DS20L won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS20L gets a ACK, DS20L will consider there is a network connection and resend all NONE-ACK messages.
501 501  )))
502 502  
503 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
491 +=== 2.5.2 Unix TimeStamp ===
504 504  
505 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
506 506  
494 +DS20L uses Unix TimeStamp format based on
507 507  
508 -=== 2.6.2 Unix TimeStamp ===
509 -
510 -
511 -DDS20-LB uses Unix TimeStamp format based on
512 -
513 513  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
514 514  
515 515  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
... ... @@ -522,23 +522,23 @@
522 522  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
523 523  
524 524  
525 -=== 2.6.3 Set Device Time ===
508 +=== 2.5.3 Set Device Time ===
526 526  
527 527  
528 528  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
529 529  
530 -Once DDS20-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS20-LB. If DDS20-LB fails to get the time from the server, DDS20-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
513 +Once DS20L Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS20L. If DS20L fails to get the time from the server, DS20L will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
531 531  
532 532  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
533 533  
534 534  
535 -=== 2.6.4 Poll sensor value ===
518 +=== 2.5.4 Poll sensor value ===
536 536  
537 537  
538 538  Users can poll sensor values based on timestamps. Below is the downlink command.
539 539  
540 540  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
541 -|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
524 +|(% colspan="4" style="background-color:#4f81bd; color:white; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
542 542  |(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
543 543  |(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
544 544  
... ... @@ -555,24 +555,24 @@
555 555  )))
556 556  
557 557  (((
558 -Uplink Internal =5s，means DDS20-LB will send one packet every 5s. range 5~~255s.
541 +Uplink Internal =5s，means DS20L will send one packet every 5s. range 5~~255s.
559 559  )))
560 560  
561 561  
562 -== 2.7 Frequency Plans ==
545 +== 2.6 Frequency Plans ==
563 563  
564 564  
565 -The DDS20-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
548 +The DS20L uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
566 566  
567 567  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
568 568  
569 569  
570 -= 3. Configure DDS20-LB =
553 +3. Configure DS20L
571 571  
572 572  == 3.1 Configure Methods ==
573 573  
574 574  
575 -DDS20-LB supports below configure method:
558 +DS20L supports below configure method:
576 576  
577 577  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
578 578  
... ... @@ -594,10 +594,10 @@
594 594  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
595 595  
596 596  
597 -== 3.3 Commands special design for DDS20-LB ==
580 +== 3.3 Commands special design for DS20L ==
598 598  
599 599  
600 -These commands only valid for DDS20-LB, as below:
583 +These commands only valid for DS20L, as below:
601 601  
602 602  
603 603  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -612,7 +612,7 @@
612 612  )))
613 613  
614 614  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
615 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
598 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
616 616  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
617 617  30000
618 618  OK
... ... @@ -640,25 +640,32 @@
640 640  )))
641 641  * (((
642 642  Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
626 +
627 +
628 +
643 643  )))
644 644  
645 645  === 3.3.2 Set Interrupt Mode ===
646 646  
647 647  
648 -Feature, Set Interrupt mode for PA8 of pin.
634 +Feature, Set Interrupt mode for pin of GPIO_EXTI.
649 649  
650 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
636 +When AT+INTMOD=0 is set, GPIO_EXTI is used as a digital input port.
651 651  
652 652  (% style="color:blue" %)**AT Command: AT+INTMOD**
653 653  
654 654  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
655 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
641 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
656 656  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
657 657  0
658 658  OK
659 659  the mode is 0 =Disable Interrupt
660 660  )))
661 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
647 +|(% style="width:154px" %)(((
648 +AT+INTMOD=2
649 +
650 +(default)
651 +)))|(% style="width:196px" %)(((
662 662  Set Transmit Interval
663 663  0. (Disable Interrupt),
664 664  ~1. (Trigger by rising and falling edge)
... ... @@ -679,7 +679,7 @@
679 679  = 4. Battery & Power Consumption =
680 680  
681 681  
682 -DDS20-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
672 +DS20L use built-in 2400mAh non-chargeable battery for long-term use up to several years*. See below link for detail information about the battery info and how to replace.
683 683  
684 684  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
685 685  
... ... @@ -688,7 +688,7 @@
688 688  
689 689  
690 690  (% class="wikigeneratedid" %)
691 -User can change firmware DDS20-LB to:
681 +User can change firmware DS20L to:
692 692  
693 693  * Change Frequency band/ region.
694 694  
... ... @@ -696,7 +696,7 @@
696 696  
697 697  * Fix bugs.
698 698  
699 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
689 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zqv1vt3komgp4tu/AAC33PnXIcWOVl_UXBEAeT_xa?dl=0]]**
700 700  
701 701  Methods to Update Firmware:
702 702  
... ... @@ -706,39 +706,38 @@
706 706  
707 707  = 6. FAQ =
708 708  
709 -== 6.1  What is the frequency plan for DDS20-LB? ==
699 +== 6.1 What is the frequency plan for DS20L? ==
710 710  
711 711  
712 -DDS20-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
702 +DS20L use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
713 713  
714 714  
715 -== 6.2  Can I use DDS20-LB in condensation environment? ==
705 += 7. Trouble Shooting =
716 716  
707 +== 7.1 AT Command input doesn't work ==
717 717  
718 -DDS20-LB is not suitable to be used in condensation environment. Condensation on the DDS20-LB probe will affect the reading and always got 0.
719 719  
710 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
720 720  
721 -= 7.  Trouble Shooting =
722 722  
723 -== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
713 +== 7.2 Significant error between the output distant value of LiDAR and actual distance ==
724 724  
725 725  
726 -It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
716 +(((
717 +(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
718 +)))
727 727  
720 +(((
721 +(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
722 +)))
728 728  
729 -== 7.2  AT Command input doesn't work ==
730 730  
731 -
732 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
733 -
734 -
735 -== 7.3  Why i always see 0x0000 or 0 for the distance value? ==
736 -
737 -
738 738  (((
739 -LDDS20 has a strict [[**installation requirement**>>||anchor="H1.5A0InstallDDS20-LB"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.
726 +(% style="color:blue" %)**Cause ②**(%%)**: **The IR-pass filters are blocked.
727 +)))
740 740  
741 -If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.
729 +(((
730 +(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
742 742  )))
743 743  
744 744  
... ... @@ -745,7 +745,7 @@
745 745  = 8. Order Info =
746 746  
747 747  
748 -Part Number: (% style="color:blue" %)**DDS20-LB-XXX**
737 +Part Number: (% style="color:blue" %)**DS20L-XXX**
749 749  
750 750  (% style="color:red" %)**XXX**(%%): **The default frequency band**
751 751  
... ... @@ -770,7 +770,7 @@
770 770  
771 771  (% style="color:#037691" %)**Package Includes**:
772 772  
773 -* DDS20-LB LoRaWAN Ultrasonic Liquid Level Sensor x 1
762 +* DS20L LoRaWAN Smart Distance Detector x 1
774 774  
775 775  (% style="color:#037691" %)**Dimension and weight**:
776 776  
image-20230614153353-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.1 KB
Content
image-20230614162334-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content
image-20230614162359-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content
image-20230615152941-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230615153004-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230805103904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.9 KB
Content
image-20230805104104-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20230805144259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +872.7 KB
Content
image-20230805144936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230805145056-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
image-20230805150315-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.6 KB
Content
image-20230805155335-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.4 KB
Content
image-20230805155428-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.5 KB
Content
image-20230805155515-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.7 KB
Content
image-20231110085300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +613.3 KB
Content
image-20231110085342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +178.7 KB
Content
image-20231110091447-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20231110091506-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20231110102635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +84.7 KB
Content