Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 79.10
edited by Xiaoling
on 2023/06/13 14:54
Change comment: There is no comment for this version
To version 113.5
edited by Xiaoling
on 2023/11/10 09:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DDS20-LB -- LoRaWAN Ultrasonic Liquid Level Sensor User Manual
1 +DS20L -- LoRaWAN Smart Distance Detector User Manual
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230613133716-2.png||height="717" width="717"]]
2 +[[image:image-20231110085342-2.png||height="481" width="481"]]
3 3  
4 4  
5 5  
... ... @@ -19,435 +19,416 @@
19 19  
20 20  = 1. Introduction =
21 21  
22 -== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
22 +== 1.1 What is LoRaWAN Smart Distance Detector ==
23 23  
24 24  
25 -The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
25 +The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN.
26 26  
27 -The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
27 +DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current 
28 +consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
28 28  
29 -DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
30 +DS20L has a (% style="color:blue" %)**built-in 2400mAh non-chargeable battery**(%%) for long-term use up to several years*. Users can also power DS20L with an external power source for (% style="color:blue" %)**continuous measuring and distance alarm / counting purposes.**
30 30  
31 -The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 +DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
32 32  
33 -DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 +DS20L supports (% style="color:blue" %)**Datalog feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
34 34  
35 -DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36 +[[image:image-20231110091506-4.png||height="391" width="768"]]
36 36  
37 -Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
38 38  
39 -[[image:image-20230613140115-3.png||height="453" width="800"]]
40 -
41 -
42 42  == 1.2 ​Features ==
43 43  
44 44  
45 -* LoRaWAN 1.0.3 Class A
46 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
47 -* Ultra-low power consumption
48 -* Liquid Level Measurement by Ultrasonic technology
49 -* Measure through container, No need to contact Liquid
50 -* Valid level range 20mm - 2000mm
51 -* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
52 -* Cable Length : 25cm
53 -* Support Bluetooth v5.1 and LoRaWAN remote configure
54 -* Support wireless OTA update firmware
42 +* LoRaWAN Class A protocol
43 +* LiDAR distance detector, range 3 ~~ 200cm
44 +* Periodically detect or continuously detect mode
55 55  * AT Commands to change parameters
56 -* Downlink to change configure
57 -* IP66 Waterproof Enclosure
58 -* 8500mAh Battery for long term use
46 +* Remotely configure parameters via LoRaWAN Downlink
47 +* Alarm & Counting mode
48 +* Datalog Feature
49 +* Firmware upgradable via program port or LoRa protocol
50 +* Built-in 2400mAh battery or power by external power source
59 59  
60 60  == 1.3 Specification ==
61 61  
62 62  
63 -(% style="color:#037691" %)**Common DC Characteristics:**
55 +(% style="color:#037691" %)**LiDAR Sensor:**
64 64  
65 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
66 -* Operating Temperature: -40 ~~ 85°C
57 +* Operation Temperature: -40 ~~ 80 °C
58 +* Operation Humidity: 0~~99.9%RH (no Dew)
59 +* Storage Temperature: -10 ~~ 45°C
60 +* Measure Range: 3cm~~200cm @ 90% reflectivity
61 +* Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
62 +* ToF FoV: ±9°, Total 18°
63 +* Light source: VCSEL
67 67  
68 -(% style="color:#037691" %)**LoRa Spec:**
69 69  
70 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
71 -* Max +22 dBm constant RF output vs.
72 -* RX sensitivity: down to -139 dBm.
73 -* Excellent blocking immunity
66 +(% style="display:none" %)
74 74  
75 -(% style="color:#037691" %)**Battery:**
76 76  
77 -* Li/SOCI2 un-chargeable battery
78 -* Capacity: 8500mAh
79 -* Self-Discharge: <1% / Year @ 25°C
80 -* Max continuously current: 130mA
81 -* Max boost current: 2A, 1 second
69 += 2. Configure DS20L to connect to LoRaWAN network =
82 82  
83 -(% style="color:#037691" %)**Power Consumption**
71 +== 2.1 How it works ==
84 84  
85 -* Sleep Mode: 5uA @ 3.3v
86 -* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
87 87  
88 -== 1.4 Suitable Container & Liquid ==
74 +The LDS12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the LDS12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
89 89  
76 +(% style="display:none" %) (%%)
90 90  
91 -* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
92 -* Container shape is regular, and surface is smooth.
93 -* Container Thickness:
94 -** Pure metal material.  2~~8mm, best is 3~~5mm
95 -** Pure non metal material: <10 mm
96 -* Pure liquid without irregular deposition.(% style="display:none" %)
78 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
97 97  
98 -== 1.5 Install DDS20-LB ==
99 99  
81 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
100 100  
101 -(% style="color:blue" %)**Step 1**(%%):  Choose the installation point.
83 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
102 102  
103 -DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
85 +[[image:image-20231110091447-3.png||height="383" width="752"]](% style="display:none" %)
104 104  
105 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
106 106  
88 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from LDS12-LB.
107 107  
108 -(((
109 -(% style="color:blue" %)**Step 2**(%%):  Polish the installation point.
110 -)))
90 +Each LDS12-LB is shipped with a sticker with the default device EUI as below:
111 111  
112 -(((
113 -For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
114 -)))
92 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
115 115  
116 -[[image:image-20230613143052-5.png]]
117 117  
95 +You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
118 118  
119 -No polish needed if the container is shine metal surface without paint or non-metal container.
120 120  
121 -[[image:image-20230613143125-6.png]]
98 +(% style="color:blue" %)**Register the device**
122 122  
100 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
123 123  
124 -(((
125 -(% style="color:blue" %)**Step3:   **(%%)Test the installation point.
126 -)))
127 127  
128 -(((
129 -Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
130 -)))
103 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
131 131  
132 -(((
133 -It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
134 -)))
105 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
135 135  
136 -(((
137 -After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
138 -)))
139 139  
108 +(% style="color:blue" %)**Add APP EUI in the application**
140 140  
141 -(((
142 -(% style="color:red" %)**LED Status:**
143 -)))
144 144  
145 -* (((
146 -Onboard LED: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
147 -)))
111 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
148 148  
149 -* (((
150 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
151 -)))
152 -* (((
153 -(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
154 -)))
155 155  
156 -(((
157 -LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
158 -)))
114 +(% style="color:blue" %)**Add APP KEY**
159 159  
116 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
160 160  
161 -(((
162 -(% style="color:red" %)**Note 2:**
163 -)))
164 164  
165 -(((
166 -(% style="color:red" %)**Ultrasonic coupling paste** (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
167 -)))
119 +(% style="color:blue" %)**Step 2:**(%%) Activate on LDS12-LB
168 168  
169 169  
170 -(((
171 -(% style="color:blue" %)**Step4:   **(%%)Install use Epoxy ab glue.
172 -)))
122 +Press the button for 5 seconds to activate the LDS12-LB.
173 173  
174 -(((
175 -Prepare Eproxy AB glue.
176 -)))
124 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
177 177  
178 -(((
179 -Put Eproxy AB glue in the sensor and press it hard on the container installation point.
180 -)))
126 +After join success, it will start to upload messages to TTN and you can see the messages in the panel.
181 181  
182 -(((
183 -Reset DDS20-LB and see if the BLUE LED is slowly blinking.
184 -)))
185 185  
186 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
129 +== 2.3 ​Uplink Payload ==
187 187  
131 +=== 2.3.1 Device Status, FPORT~=5 ===
188 188  
189 -(((
190 -(% style="color:red" %)**Note 1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
191 -)))
192 192  
193 -(((
194 -(% style="color:red" %)**Note 2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
195 -)))
134 +Users can use the downlink command(**0x26 01**) to ask LDS12-LB to send device configure detail, include device configure status. LDS12-LB will uplink a payload via FPort=5 to server.
196 196  
136 +The Payload format is as below.
197 197  
198 -== 1.6 Applications ==
138 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
139 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
140 +**Size(bytes)**
141 +)))|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**1**|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**2**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 50px;" %)**2**
142 +|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
199 199  
144 +Example parse in TTNv3
200 200  
201 -* Smart liquid control solution.
146 +[[image:image-20230805103904-1.png||height="131" width="711"]]
202 202  
203 -* Smart liquefied gas solution.
148 +(% style="color:blue" %)**Sensor Model**(%%): For LDS12-LB, this value is 0x24
204 204  
150 +(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
205 205  
206 -== 1.7 Precautions ==
152 +(% style="color:blue" %)**Frequency Band**:
207 207  
154 +0x01: EU868
208 208  
209 -* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
156 +0x02: US915
210 210  
211 -* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
158 +0x03: IN865
212 212  
213 -* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.(% style="display:none" %)
160 +0x04: AU915
214 214  
215 -== 1.8 Sleep mode and working mode ==
162 +0x05: KZ865
216 216  
164 +0x06: RU864
217 217  
218 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
166 +0x07: AS923
219 219  
220 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
168 +0x08: AS923-1
221 221  
170 +0x09: AS923-2
222 222  
223 -== 1.9 Button & LEDs ==
172 +0x0a: AS923-3
224 224  
174 +0x0b: CN470
225 225  
226 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
176 +0x0c: EU433
227 227  
178 +0x0d: KR920
228 228  
229 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
230 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
231 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
232 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
233 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
234 -)))
235 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
236 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
237 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
238 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
239 -)))
240 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
180 +0x0e: MA869
241 241  
242 -== 1.10 BLE connection ==
182 +(% style="color:blue" %)**Sub-Band**:
243 243  
184 +AU915 and US915:value 0x00 ~~ 0x08
244 244  
245 -DDS20-LB support BLE remote configure.
186 +CN470: value 0x0B ~~ 0x0C
246 246  
247 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
188 +Other Bands: Always 0x00
248 248  
249 -* Press button to send an uplink
250 -* Press button to active device.
251 -* Device Power on or reset.
190 +(% style="color:blue" %)**Battery Info**:
252 252  
253 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
192 +Check the battery voltage.
254 254  
194 +Ex1: 0x0B45 = 2885mV
255 255  
256 -== 1.11 Pin Definitions ==
196 +Ex2: 0x0B49 = 2889mV
257 257  
258 -[[image:image-20230523174230-1.png]]
259 259  
199 +=== 2.3.2 Uplink Payload, FPORT~=2 ===
260 260  
261 -== 1.12 Mechanical ==
262 262  
202 +(((
203 +LDS12-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And LDS12-LB will:
263 263  
264 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
205 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
265 265  
207 +Uplink Payload totals 11 bytes.
208 +)))
266 266  
267 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
210 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
211 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
212 +**Size(bytes)**
213 +)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white; width: 80px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**
214 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:62.5px" %)(((
215 +[[Temperature DS18B20>>||anchor="HDS18B20Temperaturesensor"]]
216 +)))|[[Distance>>||anchor="HDistance"]]|[[Distance signal strength>>||anchor="HDistancesignalstrength"]]|(% style="width:122px" %)(((
217 +[[Interrupt flag & Interrupt_level>>||anchor="HInterruptPin26A0InterruptLevel"]]
218 +)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="HLiDARtemp"]]|(% style="width:96px" %)(((
219 +[[Message Type>>||anchor="HMessageType"]]
220 +)))
268 268  
222 +[[image:image-20230805104104-2.png||height="136" width="754"]]
269 269  
270 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
271 271  
225 +==== (% style="color:blue" %)**Battery Info**(%%) ====
272 272  
273 -(% style="color:blue" %)**Probe Mechanical:**
274 274  
275 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
228 +Check the battery voltage for LDS12-LB.
276 276  
230 +Ex1: 0x0B45 = 2885mV
277 277  
278 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
232 +Ex2: 0x0B49 = 2889mV
279 279  
280 280  
281 -= 2. Configure DDS20-LB to connect to LoRaWAN network =
235 +==== (% style="color:blue" %)**DS18B20 Temperature sensor**(%%) ====
282 282  
283 -== 2.1 How it works ==
284 284  
238 +This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
285 285  
286 -The DDS20-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS20-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
287 287  
288 -(% style="display:none" %) (%%)
241 +**Example**:
289 289  
290 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
243 +If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
291 291  
245 +If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
292 292  
293 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
294 294  
295 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
248 +==== (% style="color:blue" %)**Distance**(%%) ====
296 296  
297 -[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
298 298  
251 +Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
299 299  
300 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS20-LB.
301 301  
302 -Each DDS20-LB is shipped with a sticker with the default device EUI as below:
254 +**Example**:
303 303  
304 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
256 +If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
305 305  
306 306  
307 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
259 +==== (% style="color:blue" %)**Distance signal strength**(%%) ====
308 308  
309 309  
310 -(% style="color:blue" %)**Register the device**
262 +Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
311 311  
312 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
313 313  
265 +**Example**:
314 314  
315 -(% style="color:blue" %)**Add APP EUI and DEV EUI**
267 +If payload is: 01D7(H)=471(D), distance signal strength=471, 471>100,471≠65535, the measured value of Dist is considered credible.
316 316  
317 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
269 +Customers can judge whether they need to adjust the environment based on the signal strength.
318 318  
319 319  
320 -(% style="color:blue" %)**Add APP EUI in the application**
272 +**1) When the sensor detects valid data:**
321 321  
274 +[[image:image-20230805155335-1.png||height="145" width="724"]]
322 322  
323 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
324 324  
277 +**2) When the sensor detects invalid data:**
325 325  
326 -(% style="color:blue" %)**Add APP KEY**
279 +[[image:image-20230805155428-2.png||height="139" width="726"]]
327 327  
328 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
329 329  
282 +**3) When the sensor is not connected:**
330 330  
331 -(% style="color:blue" %)**Step 2:**(%%) Activate on DDS20-LB
284 +[[image:image-20230805155515-3.png||height="143" width="725"]]
332 332  
333 333  
334 -Press the button for 5 seconds to activate the DDS20-LB.
287 +==== (% style="color:blue" %)**Interrupt Pin & Interrupt Level**(%%) ====
335 335  
336 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
337 337  
338 -After join success, it will start to upload messages to TTN and you can see the messages in the panel.
290 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
339 339  
292 +Note: The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>||anchor="H1.8PinDefinitions"]] of GPIO_EXTI .
340 340  
341 -== 2.3  ​Uplink Payload ==
294 +**Example:**
342 342  
296 +If byte[0]&0x01=0x00 : Normal uplink packet.
343 343  
298 +If byte[0]&0x01=0x01 : Interrupt Uplink Packet.
299 +
300 +
301 +==== (% style="color:blue" %)**LiDAR temp**(%%) ====
302 +
303 +
304 +Characterize the internal temperature value of the sensor.
305 +
306 +**Example: **
307 +If payload is: 1C(H) <<24>>24=28(D),LiDAR temp=28℃.
308 +If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
309 +
310 +
311 +==== (% style="color:blue" %)**Message Type**(%%) ====
312 +
313 +
344 344  (((
345 -DDS20-LB will uplink payload via LoRaWAN with below payload format: 
315 +For a normal uplink payload, the message type is always 0x01.
346 346  )))
347 347  
348 348  (((
349 -Uplink payload includes in total 8 bytes.
319 +Valid Message Type:
350 350  )))
351 351  
352 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
353 -|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
354 -**Size(bytes)**
355 -)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
356 -|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
357 -[[Distance>>||anchor="H2.3.2A0Distance"]]
358 -(unit: mm)
359 -)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
360 -[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
361 -)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
322 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
323 +|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
324 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)Normal Uplink Payload
325 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)Configure Info Payload
362 362  
363 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
327 +[[image:image-20230805150315-4.png||height="233" width="723"]]
364 364  
365 365  
366 -=== 2.3.1  Battery Info ===
330 +=== 2.3.3 Historical measuring distance, FPORT~=3 ===
367 367  
368 368  
369 -Check the battery voltage for DDS20-LB.
333 +LDS12-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
370 370  
371 -Ex1: 0x0B45 = 2885mV
335 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
372 372  
373 -Ex2: 0x0B49 = 2889mV
337 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
338 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
339 +**Size(bytes)**
340 +)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD; color: white; width: 85px;" %)**1**|=(% style="background-color: #4F81BD; color: white; width: 85px;" %)4
341 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)Interrupt flag & Interrupt_level|(% style="width:62.5px" %)(((
342 +Reserve(0xFF)
343 +)))|Distance|Distance signal strength|(% style="width:88px" %)(((
344 +LiDAR temp
345 +)))|(% style="width:85px" %)Unix TimeStamp
374 374  
347 +**Interrupt flag & Interrupt level:**
375 375  
376 -=== 2.3.2  Distance ===
349 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:480px" %)
350 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
351 +**Size(bit)**
352 +)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit7**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit6**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**[bit5:bit2]**|=(% style="width: 90px; background-color: #4F81BD; color: white;" %)**bit1**|=(% style="background-color: #4F81BD; color: white; width: 90px;" %)**bit0**
353 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)No ACK message|(% style="width:62.5px" %)Poll Message Flag|Reserve|(% style="width:91px" %)Interrupt level|(% style="width:88px" %)(((
354 +Interrupt flag
355 +)))
377 377  
378 -
379 -(((
380 -Get the distance. Flat object range 20mm - 2000mm.
357 +* (((
358 +Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, LDS12-LB will send max bytes according to the current DR and Frequency bands.
381 381  )))
382 382  
383 -(((
384 -For example, if the data you get from the register is **0x06 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
361 +For example, in the US915 band, the max payload for different DR is:
385 385  
386 -(% style="color:blue" %)**0605(H) = 1541 (D) = 1541 mm.**
387 -)))
363 +**a) DR0:** max is 11 bytes so one entry of data
388 388  
389 -* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
390 -* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
365 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
391 391  
392 -=== 2.3.3  Interrupt Pin ===
367 +**c) DR2:** total payload includes 11 entries of data
393 393  
369 +**d) DR3:** total payload includes 22 entries of data.
394 394  
395 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
371 +If LDS12-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
396 396  
397 -**Example:**
398 398  
399 -0x00: Normal uplink packet.
374 +**Downlink:**
400 400  
401 -0x01: Interrupt Uplink Packet.
376 +0x31 64 CC 68 0C 64 CC 69 74 05
402 402  
378 +[[image:image-20230805144936-2.png||height="113" width="746"]]
403 403  
404 -=== 2.3.4  DS18B20 Temperature sensor ===
380 +**Uplink:**
405 405  
382 +43 FF 0E 10 00 B0 1E 64 CC 68 0C 40 FF 0D DE 00 A8 1E 64 CC 68 29 40 FF 09 92 00 D3 1E 64 CC 68 65 40 FF 02 3A 02 BC 1E 64 CC 68 A1 41 FF 0E 1A 00 A4 1E 64 CC 68 C0 40 FF 0D 2A 00 B8 1E 64 CC 68 E8 40 FF 00 C8 11 6A 1E 64 CC 69 24 40 FF 0E 24 00 AD 1E 64 CC 69 6D
406 406  
407 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
408 408  
409 -**Example**:
385 +**Parsed Value:**
410 410  
411 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
387 +[DISTANCE , DISTANCE_SIGNAL_STRENGTH，LIDAR_TEMP，EXTI_STATUS , EXTI_FLAG , TIME]
412 412  
413 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
414 414  
390 +[360,176,30,High,True,2023-08-04 02:53:00],
415 415  
416 -=== 2.3.5  Sensor Flag ===
392 +[355,168,30,Low,False,2023-08-04 02:53:29],
417 417  
394 +[245,211,30,Low,False,2023-08-04 02:54:29],
418 418  
419 -(((
420 -0x01: Detect Ultrasonic Sensor
421 -)))
396 +[57,700,30,Low,False,2023-08-04 02:55:29],
422 422  
423 -(((
424 -0x00: No Ultrasonic Sensor
425 -)))
398 +[361,164,30,Low,True,2023-08-04 02:56:00],
426 426  
400 +[337,184,30,Low,False,2023-08-04 02:56:40],
427 427  
428 -=== 2.3.6  Decode payload in The Things Network ===
402 +[20,4458,30,Low,False,2023-08-04 02:57:40],
429 429  
404 +[362,173,30,Low,False,2023-08-04 02:58:53],
430 430  
431 -While using TTN network, you can add the payload format to decode the payload.
432 432  
433 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
407 +**History read from serial port：**
434 434  
435 -The payload decoder function for TTN V3 is here:
409 +[[image:image-20230805145056-3.png]]
436 436  
437 -(((
438 -DDS20-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
439 -)))
440 440  
412 +=== 2.3.4 Decode payload in The Things Network ===
441 441  
442 -== 2.4  Uplink Interval ==
443 443  
415 +While using TTN network, you can add the payload format to decode the payload.
444 444  
445 -The DDS20-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
417 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
446 446  
447 447  
448 -== 2.5  ​Show Data in DataCake IoT Server ==
420 +(((
421 +The payload decoder function for TTN is here:
422 +)))
449 449  
424 +(((
425 +LDS12-LB TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
426 +)))
450 450  
428 +
429 +== 2.4 ​Show Data in DataCake IoT Server ==
430 +
431 +
451 451  (((
452 452  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
453 453  )))
... ... @@ -470,7 +470,7 @@
470 470  
471 471  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
472 472  
473 -(% style="color:blue" %)**Step 4**(%%)**: Search the DDS20-LB and add DevEUI.**
454 +(% style="color:blue" %)**Step 4**(%%)**: Search the LDS12-LB and add DevEUI.**
474 474  
475 475  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
476 476  
... ... @@ -480,35 +480,31 @@
480 480  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
481 481  
482 482  
464 +== 2.5 Datalog Feature ==
483 483  
484 -== 2.6 Datalog Feature ==
485 485  
467 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LDS12-LB will store the reading for future retrieving purposes.
486 486  
487 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS20-LB will store the reading for future retrieving purposes.
488 488  
470 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
489 489  
490 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
491 491  
473 +Set PNACKMD=1, LDS12-LB will wait for ACK for every uplink, when there is no LoRaWAN network,LDS12-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
492 492  
493 -Set PNACKMD=1, DDS20-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS20-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
494 -
495 495  * (((
496 -a) DDS20-LB will do an ACK check for data records sending to make sure every data arrive server.
476 +a) LDS12-LB will do an ACK check for data records sending to make sure every data arrive server.
497 497  )))
498 498  * (((
499 -b) DDS20-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS20-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS20-LB gets a ACK, DDS20-LB will consider there is a network connection and resend all NONE-ACK messages.
479 +b) LDS12-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but LDS12-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if LDS12-LB gets a ACK, LDS12-LB will consider there is a network connection and resend all NONE-ACK messages.
500 500  )))
501 501  
502 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
503 503  
504 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
505 505  
484 +=== 2.5.2 Unix TimeStamp ===
506 506  
507 -=== 2.6.2 Unix TimeStamp ===
508 508  
487 +LDS12-LB uses Unix TimeStamp format based on
509 509  
510 -DDS20-LB uses Unix TimeStamp format based on
511 -
512 512  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
513 513  
514 514  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
... ... @@ -521,23 +521,23 @@
521 521  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
522 522  
523 523  
524 -=== 2.6.3 Set Device Time ===
501 +=== 2.5.3 Set Device Time ===
525 525  
526 526  
527 527  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
528 528  
529 -Once DDS20-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS20-LB. If DDS20-LB fails to get the time from the server, DDS20-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
506 +Once LDS12-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LDS12-LB. If LDS12-LB fails to get the time from the server, LDS12-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
530 530  
531 531  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
532 532  
533 533  
534 -=== 2.6.4 Poll sensor value ===
511 +=== 2.5.4 Poll sensor value ===
535 535  
536 536  
537 537  Users can poll sensor values based on timestamps. Below is the downlink command.
538 538  
539 539  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
540 -|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
517 +|(% colspan="4" style="background-color:#4f81bd; color:white; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
541 541  |(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
542 542  |(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
543 543  
... ... @@ -554,24 +554,24 @@
554 554  )))
555 555  
556 556  (((
557 -Uplink Internal =5s，means DDS20-LB will send one packet every 5s. range 5~~255s.
534 +Uplink Internal =5s，means LDS12-LB will send one packet every 5s. range 5~~255s.
558 558  )))
559 559  
560 560  
561 -== 2.7 Frequency Plans ==
538 +== 2.6 Frequency Plans ==
562 562  
563 563  
564 -The DDS20-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
541 +The LDS12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
565 565  
566 566  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
567 567  
568 568  
569 -= 3. Configure DDS20-LB =
546 +(% style="color:inherit; font-family:inherit; font-size:29px" %)3. Configure LDS12-LB
570 570  
571 571  == 3.1 Configure Methods ==
572 572  
573 573  
574 -DDS20-LB supports below configure method:
551 +LDS12-LB supports below configure method:
575 575  
576 576  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
577 577  
... ... @@ -593,10 +593,10 @@
593 593  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
594 594  
595 595  
596 -== 3.3 Commands special design for DDS20-LB ==
573 +== 3.3 Commands special design for LDS12-LB ==
597 597  
598 598  
599 -These commands only valid for DDS20-LB, as below:
576 +These commands only valid for LDS12-LB, as below:
600 600  
601 601  
602 602  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -611,7 +611,7 @@
611 611  )))
612 612  
613 613  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
614 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
591 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
615 615  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
616 616  30000
617 617  OK
... ... @@ -639,25 +639,32 @@
639 639  )))
640 640  * (((
641 641  Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
619 +
620 +
621 +
642 642  )))
643 643  
644 644  === 3.3.2 Set Interrupt Mode ===
645 645  
646 646  
647 -Feature, Set Interrupt mode for PA8 of pin.
627 +Feature, Set Interrupt mode for pin of GPIO_EXTI.
648 648  
649 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
629 +When AT+INTMOD=0 is set, GPIO_EXTI is used as a digital input port.
650 650  
651 651  (% style="color:blue" %)**AT Command: AT+INTMOD**
652 652  
653 653  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
654 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
634 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
655 655  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
656 656  0
657 657  OK
658 658  the mode is 0 =Disable Interrupt
659 659  )))
660 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
640 +|(% style="width:154px" %)(((
641 +AT+INTMOD=2
642 +
643 +(default)
644 +)))|(% style="width:196px" %)(((
661 661  Set Transmit Interval
662 662  0. (Disable Interrupt),
663 663  ~1. (Trigger by rising and falling edge)
... ... @@ -675,10 +675,11 @@
675 675  
676 676  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
677 677  
662 +
678 678  = 4. Battery & Power Consumption =
679 679  
680 680  
681 -DDS20-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
666 +LDS12-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
682 682  
683 683  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
684 684  
... ... @@ -687,7 +687,7 @@
687 687  
688 688  
689 689  (% class="wikigeneratedid" %)
690 -User can change firmware DDS20-LB to:
675 +User can change firmware LDS12-LB to:
691 691  
692 692  * Change Frequency band/ region.
693 693  
... ... @@ -695,49 +695,48 @@
695 695  
696 696  * Fix bugs.
697 697  
698 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
683 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/w1p7ukjrx49e62r/AAB3uCNCt-koYUvMkZUPBRSca?dl=0]]**
699 699  
700 700  Methods to Update Firmware:
701 701  
702 -* (Recommanded way) OTA firmware update via wireless:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
687 +* (Recommanded way) OTA firmware update via wireless:  **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
703 703  
704 704  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
705 705  
706 706  = 6. FAQ =
707 707  
708 -== 6.1  What is the frequency plan for DDS20-LB? ==
693 +== 6.1 What is the frequency plan for LDS12-LB? ==
709 709  
710 710  
711 -DDS20-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
696 +LDS12-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
712 712  
713 713  
714 -== 6.2  Can I use DDS20-LB in condensation environment? ==
699 += 7. Trouble Shooting =
715 715  
701 +== 7.1 AT Command input doesn't work ==
716 716  
717 -DDS20-LB is not suitable to be used in condensation environment. Condensation on the DDS20-LB probe will affect the reading and always got 0.
718 718  
704 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
719 719  
720 -= 7.  Trouble Shooting =
721 721  
722 -== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
707 +== 7.2 Significant error between the output distant value of LiDAR and actual distance ==
723 723  
724 724  
725 -It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
710 +(((
711 +(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
712 +)))
726 726  
714 +(((
715 +(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
716 +)))
727 727  
728 -== 7.2  AT Command input doesn't work ==
729 729  
730 -
731 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
732 -
733 -
734 -== 7.3  Why i always see 0x0000 or 0 for the distance value? ==
735 -
736 -
737 737  (((
738 -LDDS20 has a strict [[**installation requirement**>>||anchor="H1.5A0InstallLDDS20"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.
720 +(% style="color:blue" %)**Cause ②**(%%)**: **The IR-pass filters are blocked.
721 +)))
739 739  
740 -If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.
723 +(((
724 +(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
741 741  )))
742 742  
743 743  
... ... @@ -744,7 +744,7 @@
744 744  = 8. Order Info =
745 745  
746 746  
747 -Part Number: (% style="color:blue" %)**DDS20-LB-XXX**
731 +Part Number: (% style="color:blue" %)**DS20L-XXX**
748 748  
749 749  (% style="color:red" %)**XXX**(%%): **The default frequency band**
750 750  
... ... @@ -764,14 +764,12 @@
764 764  
765 765  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
766 766  
767 -
768 -
769 769  = 9. ​Packing Info =
770 770  
771 771  
772 772  (% style="color:#037691" %)**Package Includes**:
773 773  
774 -* DDS20-LB LoRaWAN Ultrasonic Liquid Level Sensor x 1
756 +* DS20L LoRaWAN Smart Distance Detector x 1
775 775  
776 776  (% style="color:#037691" %)**Dimension and weight**:
777 777  
... ... @@ -783,8 +783,6 @@
783 783  
784 784  * Weight / pcs : g
785 785  
786 -
787 -
788 788  = 10. Support =
789 789  
790 790  
image-20230614153353-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.1 KB
Content
image-20230614162334-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content
image-20230614162359-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content
image-20230615152941-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230615153004-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.9 KB
Content
image-20230805103904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.9 KB
Content
image-20230805104104-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20230805144259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +872.7 KB
Content
image-20230805144936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230805145056-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
image-20230805150315-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.6 KB
Content
image-20230805155335-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.4 KB
Content
image-20230805155428-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.5 KB
Content
image-20230805155515-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.7 KB
Content
image-20231110085300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +613.3 KB
Content
image-20231110085342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +178.7 KB
Content
image-20231110091447-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20231110091506-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content