Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 75.1
edited by Xiaoling
on 2023/06/13 13:37
Change comment: Uploaded new attachment "image-20230613133716-2.png", version {1}
To version 77.4
edited by Xiaoling
on 2023/06/13 14:11
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,8 +1,13 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230613100900-1.png||height="650" width="650"]]
2 +[[image:image-20230613133716-2.png||height="717" width="717"]]
3 3  
4 4  
5 5  
6 +
7 +
8 +
9 +
10 +
6 6  **Table of Contents：**
7 7  
8 8  {{toc/}}
... ... @@ -14,24 +14,26 @@
14 14  
15 15  = 1. Introduction =
16 16  
17 -== 1.1 What is LoRaWAN Distance Detection Sensor ==
22 +== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
18 18  
19 19  
20 -The Dragino DDS45-LB is a (% style="color:blue" %)** LoRaWAN Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:blue" %)** ultrasonic sensing technology**(%%) for (% style="color:blue" %)**distance measurement**(%%), and (% style="color:blue" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The DDS45-LB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
25 +The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
21 21  
22 -It detects the distance(% style="color:blue" %)**  between the measured object and the sensor**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
27 +The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
23 23  
24 -The LoRa wireless technology used in DDS45-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
29 +DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
25 25  
26 -DDS45-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
31 +The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
27 27  
28 -DDS45-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
33 +DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
29 29  
30 -Each DDS45-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
35 +DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
31 31  
32 -[[image:image-20230613102459-3.png||height="476" width="855"]]
37 +Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
33 33  
39 +[[image:image-20230613140115-3.png||height="453" width="800"]]
34 34  
41 +
35 35  == 1.2 ​Features ==
36 36  
37 37  
... ... @@ -38,10 +38,10 @@
38 38  * LoRaWAN 1.0.3 Class A
39 39  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
40 40  * Ultra-low power consumption
41 -* Distance Detection by Ultrasonic technology
42 -* Flat object range 30mm - 4500mm
43 -* Accuracy: ±(1cm+S*0.3%) (S: Distance)
44 -* Measure Angle: 60°
48 +* Liquid Level Measurement by Ultrasonic technology
49 +* Measure through container, No need to contact Liquid
50 +* Valid level range 20mm - 2000mm
51 +* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
45 45  * Cable Length : 25cm
46 46  * Support Bluetooth v5.1 and LoRaWAN remote configure
47 47  * Support wireless OTA update firmware
... ... @@ -50,7 +50,6 @@
50 50  * IP66 Waterproof Enclosure
51 51  * 8500mAh Battery for long term use
52 52  
53 -
54 54  == 1.3 Specification ==
55 55  
56 56  
... ... @@ -80,70 +80,162 @@
80 80  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
81 81  
82 82  
83 -== 1.4 Rated environmental conditions ==
89 +== 1.4 Suitable Container & Liquid ==
84 84  
85 85  
86 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
87 -|(% style="background-color:#d9e2f3; color:#0070c0; width:163px" %)**Item**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)(((
88 -**Minimum value**
89 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)(((
90 -**Typical value**
91 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:87px" %)(((
92 -**Maximum value**
93 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Unit**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Remarks**
94 -|(% style="width:174px" %)Storage temperature|(% style="width:86px" %)-25|(% style="width:66px" %)25|(% style="width:90px" %)80|(% style="width:48px" %)℃|(% style="width:203px" %)
95 -|(% style="width:174px" %)Storage humidity|(% style="width:86px" %) |(% style="width:66px" %)65%|(% style="width:90px" %)90%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
96 -|(% style="width:174px" %)Operating temperature|(% style="width:86px" %)-15|(% style="width:66px" %)25|(% style="width:90px" %)60|(% style="width:48px" %)℃|(% style="width:203px" %)
97 -|(% style="width:174px" %)Working humidity|(% style="width:86px" %)(((
98 -
92 +* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
93 +* Container shape is regular, and surface is smooth.
94 +* Container Thickness:
95 +** Pure metal material.  2~~8mm, best is 3~~5mm
96 +** Pure non metal material: <10 mm
97 +* Pure liquid without irregular deposition.(% style="display:none" %)
99 99  
100 -
101 -)))|(% style="width:66px" %)65%|(% style="width:90px" %)80%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
102 102  
100 +
101 +== 1.5 Install DDS20-LB ==
102 +
103 +
104 +(% style="color:blue" %)**Step 1**(%%):  Choose the installation point.
105 +
106 +DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
107 +
108 +
109 +[[image:image-20220615091045-3.png]]
110 +
111 +
112 +
103 103  (((
104 -(% style="color:red" %)**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);       **
114 +(% style="color:blue" %)**Step 2**(%%):  Polish the installation point.
115 +)))
105 105  
106 -(% style="color:red" %)** b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
117 +(((
118 +For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
119 +)))
107 107  
108 -
121 +[[image:image-20220615092010-11.png]]
122 +
123 +
124 +No polish needed if the container is shine metal surface without paint or non-metal container.
125 +
126 +[[image:image-20220615092044-12.png]]
127 +
128 +
129 +
130 +(((
131 +(% style="color:blue" %)**Step3:   **(%%)Test the installation point.
109 109  )))
110 110  
111 -== 1.5 Effective measurement range Reference beam pattern ==
134 +(((
135 +Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
136 +)))
112 112  
113 113  
114 -(% style="color:blue" %)**1. The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
139 +(((
140 +It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
141 +)))
115 115  
116 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852253176-749.png?rev=1.1||alt="1654852253176-749.png"]]
143 +[[image:1655256160324-178.png||height="151" width="419"]][[image:image-20220615092327-13.png||height="146" width="260"]]
117 117  
118 118  
119 -(% style="color:blue" %)**2. The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
146 +(((
147 +After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
148 +)))
120 120  
121 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852175653-550.png?rev=1.1||alt="1654852175653-550.png"]]
122 122  
151 +(((
152 +(% style="color:red" %)**LED Status:**
153 +)))
123 123  
155 +* (((
156 +Onboard LED: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
157 +)))
158 +
159 +* (((
160 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
161 +)))
162 +* (((
163 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
164 +)))
165 +
166 +(((
167 +LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
168 +)))
169 +
170 +
171 +(((
172 +(% style="color:red" %)**Note 2:**
173 +)))
174 +
175 +(((
176 +(% style="color:red" %)**Ultrasonic coupling paste** (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
177 +)))
178 +
179 +
180 +(((
181 +(% style="color:blue" %)**Step4:   **(%%)Install use Epoxy ab glue.
182 +)))
183 +
184 +(((
185 +Prepare Eproxy AB glue.
186 +)))
187 +
188 +(((
189 +Put Eproxy AB glue in the sensor and press it hard on the container installation point.
190 +)))
191 +
192 +(((
193 +Reset DDS20-LB and see if the BLUE LED is slowly blinking.
194 +)))
195 +
196 +[[image:image-20220615091045-8.png||height="203" width="341"]] [[image:image-20220615091045-9.png||height="200" width="284"]]
197 +
198 +
199 +(((
200 +(% style="color:red" %)**Note 1:**
201 +)))
202 +
203 +(((
204 +Eproxy AB glue needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
205 +)))
206 +
207 +
208 +(((
209 +(% style="color:red" %)**Note 2:**
210 +)))
211 +
212 +(((
213 +(% style="color:red" %)**Eproxy AB glue**(%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
214 +)))
215 +
216 +
124 124  == 1.6 Applications ==
125 125  
126 126  
127 -* Horizontal distance measurement
128 -* Liquid level measurement
129 -* Parking management system
130 -* Object proximity and presence detection
131 -* Intelligent trash can management system
132 -* Robot obstacle avoidance
133 -* Automatic control
134 -* Sewer
135 -* Bottom water level monitoring
220 +* Smart liquid control solution.
136 136  
222 +* Smart liquefied gas solution.
137 137  
138 -== 1.7 Sleep mode and working mode ==
139 139  
225 +== 1.7 Precautions ==
140 140  
227 +
228 +* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
229 +
230 +* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
231 +
232 +* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.(% style="display:none" %)
233 +
234 +
235 +
236 +== 1.8 Sleep mode and working mode ==
237 +
238 +
141 141  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
142 142  
143 143  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
144 144  
145 145  
146 -== 1.8 Button & LEDs ==
244 +== 1.9 Button & LEDs ==
147 147  
148 148  
149 149  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -162,10 +162,9 @@
162 162  )))
163 163  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
164 164  
263 +== 1.10 BLE connection ==
165 165  
166 -== 1.9 BLE connection ==
167 167  
168 -
169 169  DDS45-LB support BLE remote configure.
170 170  
171 171  
... ... @@ -178,12 +178,12 @@
178 178  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
179 179  
180 180  
181 -== 1.10 Pin Definitions ==
278 +== 1.11 Pin Definitions ==
182 182  
183 183  [[image:image-20230523174230-1.png]]
184 184  
185 185  
186 -== 1.11 Mechanical ==
283 +== 1.12 Mechanical ==
187 187  
188 188  
189 189  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -216,7 +216,7 @@
216 216  
217 217  The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
218 218  
219 -[[image:image-20230613102426-2.png||height="476" width="855"]](% style="display:none" %)
316 +[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
220 220  
221 221  
222 222  (% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS45-LB.
... ... @@ -311,7 +311,6 @@
311 311  * If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
312 312  * If the sensor value lower than 0x001E (30mm), the sensor value will be 0x00.
313 313  
314 -
315 315  === 2.3.3  Interrupt Pin ===
316 316  
317 317  
... ... @@ -502,7 +502,6 @@
502 502  
503 503  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
504 504  
505 -
506 506  == 3.2 General Commands ==
507 507  
508 508  
... ... @@ -565,7 +565,6 @@
565 565  Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
566 566  )))
567 567  
568 -
569 569  === 3.3.2 Set Interrupt Mode ===
570 570  
571 571  
... ... @@ -600,7 +600,6 @@
600 600  
601 601  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
602 602  
603 -
604 604  = 4. Battery & Power Consumption =
605 605  
606 606  
... ... @@ -629,7 +629,6 @@
629 629  
630 630  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
631 631  
632 -
633 633  = 6. FAQ =
634 634  
635 635  == 6.1  What is the frequency plan for DDS45-LB? ==
... ... @@ -712,7 +712,6 @@
712 712  
713 713  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
714 714  
715 -
716 716  = 9. ​Packing Info =
717 717  
718 718  
... ... @@ -730,7 +730,6 @@
730 730  
731 731  * Weight / pcs : g
732 732  
733 -
734 734  = 10. Support =
735 735  
736 736  
image-20230613140115-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +92.1 KB
Content
image-20230613140140-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +92.1 KB
Content