Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 73.8
edited by Xiaoling
on 2023/06/13 10:59
Change comment: There is no comment for this version
To version 79.6
edited by Xiaoling
on 2023/06/13 14:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DDS45-LB -- LoRaWAN Distance Detection Sensor User Manual
1 +DDS20-LB -- LoRaWAN Ultrasonic Liquid Level Sensor User Manual
Content
... ... @@ -1,8 +1,13 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230613100900-1.png||height="650" width="650"]]
2 +[[image:image-20230613133716-2.png||height="717" width="717"]]
3 3  
4 4  
5 5  
6 +
7 +
8 +
9 +
10 +
6 6  **Table of Contents：**
7 7  
8 8  {{toc/}}
... ... @@ -14,24 +14,26 @@
14 14  
15 15  = 1. Introduction =
16 16  
17 -== 1.1 What is LoRaWAN Distance Detection Sensor ==
22 +== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
18 18  
19 19  
20 -The Dragino DDS45-LB is a (% style="color:blue" %)** LoRaWAN Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:blue" %)** ultrasonic sensing technology**(%%) for (% style="color:blue" %)**distance measurement**(%%), and (% style="color:blue" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The DDS45-LB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
25 +The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
21 21  
22 -It detects the distance(% style="color:blue" %)**  between the measured object and the sensor**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
27 +The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
23 23  
24 -The LoRa wireless technology used in DDS45-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
29 +DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
25 25  
26 -DDS45-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
31 +The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
27 27  
28 -DDS45-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
33 +DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
29 29  
30 -Each DDS45-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
35 +DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
31 31  
32 -[[image:image-20230613102459-3.png||height="476" width="855"]]
37 +Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
33 33  
39 +[[image:image-20230613140115-3.png||height="453" width="800"]]
34 34  
41 +
35 35  == 1.2 ​Features ==
36 36  
37 37  
... ... @@ -38,10 +38,10 @@
38 38  * LoRaWAN 1.0.3 Class A
39 39  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
40 40  * Ultra-low power consumption
41 -* Distance Detection by Ultrasonic technology
42 -* Flat object range 30mm - 4500mm
43 -* Accuracy: ±(1cm+S*0.3%) (S: Distance)
44 -* Measure Angle: 60°
48 +* Liquid Level Measurement by Ultrasonic technology
49 +* Measure through container, No need to contact Liquid
50 +* Valid level range 20mm - 2000mm
51 +* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
45 45  * Cable Length : 25cm
46 46  * Support Bluetooth v5.1 and LoRaWAN remote configure
47 47  * Support wireless OTA update firmware
... ... @@ -78,69 +78,145 @@
78 78  * Sleep Mode: 5uA @ 3.3v
79 79  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
80 80  
81 -== 1.4 Rated environmental conditions ==
88 +== 1.4 Suitable Container & Liquid ==
82 82  
83 83  
84 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
85 -|(% style="background-color:#d9e2f3; color:#0070c0; width:163px" %)**Item**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)(((
86 -**Minimum value**
87 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)(((
88 -**Typical value**
89 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:87px" %)(((
90 -**Maximum value**
91 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Unit**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Remarks**
92 -|(% style="width:174px" %)Storage temperature|(% style="width:86px" %)-25|(% style="width:66px" %)25|(% style="width:90px" %)80|(% style="width:48px" %)℃|(% style="width:203px" %)
93 -|(% style="width:174px" %)Storage humidity|(% style="width:86px" %) |(% style="width:66px" %)65%|(% style="width:90px" %)90%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
94 -|(% style="width:174px" %)Operating temperature|(% style="width:86px" %)-15|(% style="width:66px" %)25|(% style="width:90px" %)60|(% style="width:48px" %)℃|(% style="width:203px" %)
95 -|(% style="width:174px" %)Working humidity|(% style="width:86px" %)(((
96 -
91 +* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
92 +* Container shape is regular, and surface is smooth.
93 +* Container Thickness:
94 +** Pure metal material.  2~~8mm, best is 3~~5mm
95 +** Pure non metal material: <10 mm
96 +* Pure liquid without irregular deposition.(% style="display:none" %)
97 97  
98 -
99 -)))|(% style="width:66px" %)65%|(% style="width:90px" %)80%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
100 100  
99 +== 1.5 Install DDS20-LB ==
100 +
101 +
102 +(% style="color:blue" %)**Step 1**(%%):  Choose the installation point.
103 +
104 +DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
105 +
106 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
107 +
108 +
101 101  (((
102 -(% style="color:red" %)**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);       **
110 +(% style="color:blue" %)**Step 2**(%%):  Polish the installation point.
111 +)))
103 103  
104 -(% style="color:red" %)** b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
113 +(((
114 +For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
115 +)))
105 105  
106 -
117 +[[image:image-20230613143052-5.png]]
118 +
119 +
120 +No polish needed if the container is shine metal surface without paint or non-metal container.
121 +
122 +[[image:image-20230613143125-6.png]]
123 +
124 +
125 +(((
126 +(% style="color:blue" %)**Step3:   **(%%)Test the installation point.
107 107  )))
108 108  
109 -== 1.5 Effective measurement range Reference beam pattern ==
129 +(((
130 +Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
131 +)))
110 110  
133 +(((
134 +It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
135 +)))
111 111  
112 -(% style="color:blue" %)**1. The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
137 +(((
138 +After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
139 +)))
113 113  
114 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852253176-749.png?rev=1.1||alt="1654852253176-749.png"]]
115 115  
142 +(((
143 +(% style="color:red" %)**LED Status:**
144 +)))
116 116  
117 -(% style="color:blue" %)**2. The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
146 +* (((
147 +Onboard LED: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
148 +)))
118 118  
119 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852175653-550.png?rev=1.1||alt="1654852175653-550.png"]]
150 +* (((
151 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
152 +)))
153 +* (((
154 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
155 +)))
120 120  
157 +(((
158 +LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
159 +)))
121 121  
161 +
162 +(((
163 +(% style="color:red" %)**Note 2:**
164 +)))
165 +
166 +(((
167 +(% style="color:red" %)**Ultrasonic coupling paste** (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
168 +)))
169 +
170 +
171 +(((
172 +(% style="color:blue" %)**Step4:   **(%%)Install use Epoxy ab glue.
173 +)))
174 +
175 +(((
176 +Prepare Eproxy AB glue.
177 +)))
178 +
179 +(((
180 +Put Eproxy AB glue in the sensor and press it hard on the container installation point.
181 +)))
182 +
183 +(((
184 +Reset DDS20-LB and see if the BLUE LED is slowly blinking.
185 +)))
186 +
187 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
188 +
189 +
190 +(((
191 +(% style="color:red" %)**Note 1:(%%) (% style="color:blue" %)Eproxy AB glue**(%%) needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
192 +)))
193 +
194 +(((
195 +(% style="color:red" %)**Note 2:(%%) (% style="color:blue" %)Eproxy AB glue**(%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
196 +)))
197 +
198 +
122 122  == 1.6 Applications ==
123 123  
124 124  
125 -* Horizontal distance measurement
126 -* Liquid level measurement
127 -* Parking management system
128 -* Object proximity and presence detection
129 -* Intelligent trash can management system
130 -* Robot obstacle avoidance
131 -* Automatic control
132 -* Sewer
133 -* Bottom water level monitoring
202 +* Smart liquid control solution.
134 134  
135 -== 1.7 Sleep mode and working mode ==
204 +* Smart liquefied gas solution.
136 136  
137 137  
207 +
208 +== 1.7 Precautions ==
209 +
210 +
211 +* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
212 +
213 +* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
214 +
215 +* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.(% style="display:none" %)
216 +
217 +
218 +== 1.8 Sleep mode and working mode ==
219 +
220 +
138 138  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
139 139  
140 140  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
141 141  
142 142  
143 -== 1.8 Button & LEDs ==
226 +== 1.9 Button & LEDs ==
144 144  
145 145  
146 146  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -159,12 +159,11 @@
159 159  )))
160 160  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
161 161  
162 -== 1.9 BLE connection ==
245 +== 1.10 BLE connection ==
163 163  
164 164  
165 -DDS45-LB support BLE remote configure.
248 +DDS20-LB support BLE remote configure.
166 166  
167 -
168 168  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
169 169  
170 170  * Press button to send an uplink
... ... @@ -174,12 +174,12 @@
174 174  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
175 175  
176 176  
177 -== 1.10 Pin Definitions ==
259 +== 1.11 Pin Definitions ==
178 178  
179 179  [[image:image-20230523174230-1.png]]
180 180  
181 181  
182 -== 1.11 Mechanical ==
264 +== 1.12 Mechanical ==
183 183  
184 184  
185 185  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -193,17 +193,18 @@
193 193  
194 194  (% style="color:blue" %)**Probe Mechanical:**
195 195  
196 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS45%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654915562090-396.png?rev=1.1||alt="1654915562090-396.png"]]
278 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
197 197  
198 198  
281 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
199 199  
200 200  
201 -= 2. Configure DDS45-LB to connect to LoRaWAN network =
284 += 2. Configure DDS20-LB to connect to LoRaWAN network =
202 202  
203 203  == 2.1 How it works ==
204 204  
205 205  
206 -The DDS45-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS45-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
289 +The DDS20-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS20-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
207 207  
208 208  (% style="display:none" %) (%%)
209 209  
... ... @@ -214,12 +214,12 @@
214 214  
215 215  The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
216 216  
217 -[[image:image-20230613102426-2.png||height="476" width="855"]](% style="display:none" %)
300 +[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
218 218  
219 219  
220 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS45-LB.
303 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS20-LB.
221 221  
222 -Each DDS45-LB is shipped with a sticker with the default device EUI as below:
305 +Each DDS20-LB is shipped with a sticker with the default device EUI as below:
223 223  
224 224  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
225 225  
... ... @@ -248,10 +248,10 @@
248 248  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
249 249  
250 250  
251 -(% style="color:blue" %)**Step 2:**(%%) Activate on DDS45-LB
334 +(% style="color:blue" %)**Step 2:**(%%) Activate on DDS20-LB
252 252  
253 253  
254 -Press the button for 5 seconds to activate the DDS45-LB.
337 +Press the button for 5 seconds to activate the DDS20-LB.
255 255  
256 256  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
257 257  
... ... @@ -262,7 +262,7 @@
262 262  
263 263  
264 264  (((
265 -DDS45-LB will uplink payload via LoRaWAN with below payload format: 
348 +DDS20-LB will uplink payload via LoRaWAN with below payload format: 
266 266  )))
267 267  
268 268  (((
... ... @@ -286,7 +286,7 @@
286 286  === 2.3.1  Battery Info ===
287 287  
288 288  
289 -Check the battery voltage for DDS45-LB.
372 +Check the battery voltage for DDS20-LB.
290 290  
291 291  Ex1: 0x0B45 = 2885mV
292 292  
... ... @@ -306,12 +306,9 @@
306 306  (% style="color:blue" %)**0B05(H) = 2821 (D) = 2821 mm.**
307 307  )))
308 308  
309 -
310 310  * If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
311 311  * If the sensor value lower than 0x001E (30mm), the sensor value will be 0x00.
312 312  
313 -
314 -
315 315  === 2.3.3  Interrupt Pin ===
316 316  
317 317  
... ... @@ -358,7 +358,7 @@
358 358  The payload decoder function for TTN V3 is here:
359 359  
360 360  (((
361 -DDS45-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
441 +DDS20-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
362 362  )))
363 363  
364 364  
... ... @@ -365,7 +365,7 @@
365 365  == 2.4  Uplink Interval ==
366 366  
367 367  
368 -The DDS45-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
448 +The DDS20-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
369 369  
370 370  
371 371  == 2.5  ​Show Data in DataCake IoT Server ==
... ... @@ -393,7 +393,7 @@
393 393  
394 394  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
395 395  
396 -(% style="color:blue" %)**Step 4**(%%)**: Search the DDS45-LB and add DevEUI.**
476 +(% style="color:blue" %)**Step 4**(%%)**: Search the DDS20-LB and add DevEUI.**
397 397  
398 398  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
399 399  
... ... @@ -407,19 +407,19 @@
407 407  == 2.6 Datalog Feature ==
408 408  
409 409  
410 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS45-LB will store the reading for future retrieving purposes.
490 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS20-LB will store the reading for future retrieving purposes.
411 411  
412 412  
413 413  === 2.6.1 Ways to get datalog via LoRaWAN ===
414 414  
415 415  
416 -Set PNACKMD=1, DDS45-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS45-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
496 +Set PNACKMD=1, DDS20-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS20-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
417 417  
418 418  * (((
419 -a) DDS45-LB will do an ACK check for data records sending to make sure every data arrive server.
499 +a) DDS20-LB will do an ACK check for data records sending to make sure every data arrive server.
420 420  )))
421 421  * (((
422 -b) DDS45-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS45-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS45-LB gets a ACK, DDS45-LB will consider there is a network connection and resend all NONE-ACK messages.
502 +b) DDS20-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS20-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS20-LB gets a ACK, DDS20-LB will consider there is a network connection and resend all NONE-ACK messages.
423 423  )))
424 424  
425 425  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -430,7 +430,7 @@
430 430  === 2.6.2 Unix TimeStamp ===
431 431  
432 432  
433 -DDS45-LB uses Unix TimeStamp format based on
513 +DDS20-LB uses Unix TimeStamp format based on
434 434  
435 435  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
436 436  
... ... @@ -449,7 +449,7 @@
449 449  
450 450  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
451 451  
452 -Once DDS45-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS45-LB. If DDS45-LB fails to get the time from the server, DDS45-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
532 +Once DDS20-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS20-LB. If DDS20-LB fails to get the time from the server, DDS20-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
453 453  
454 454  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
455 455  
... ... @@ -477,7 +477,7 @@
477 477  )))
478 478  
479 479  (((
480 -Uplink Internal =5s，means DDS45-LB will send one packet every 5s. range 5~~255s.
560 +Uplink Internal =5s，means DDS20-LB will send one packet every 5s. range 5~~255s.
481 481  )))
482 482  
483 483  
... ... @@ -484,17 +484,17 @@
484 484  == 2.7 Frequency Plans ==
485 485  
486 486  
487 -The DDS45-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
567 +The DDS20-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
488 488  
489 489  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
490 490  
491 491  
492 -= 3. Configure DDS45-LB =
572 += 3. Configure DDS20-LB =
493 493  
494 494  == 3.1 Configure Methods ==
495 495  
496 496  
497 -DDS45-LB supports below configure method:
577 +DDS20-LB supports below configure method:
498 498  
499 499  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
500 500  
... ... @@ -516,10 +516,10 @@
516 516  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
517 517  
518 518  
519 -== 3.3 Commands special design for DDS45-LB ==
599 +== 3.3 Commands special design for DDS20-LB ==
520 520  
521 521  
522 -These commands only valid for DDS45-LB, as below:
602 +These commands only valid for DDS20-LB, as below:
523 523  
524 524  
525 525  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -564,8 +564,6 @@
564 564  Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
565 565  )))
566 566  
567 -
568 -
569 569  === 3.3.2 Set Interrupt Mode ===
570 570  
571 571  
... ... @@ -600,12 +600,10 @@
600 600  
601 601  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
602 602  
603 -
604 -
605 605  = 4. Battery & Power Consumption =
606 606  
607 607  
608 -DDS45-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
684 +DDS20-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
609 609  
610 610  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
611 611  
... ... @@ -614,7 +614,7 @@
614 614  
615 615  
616 616  (% class="wikigeneratedid" %)
617 -User can change firmware DDS45-LB to:
693 +User can change firmware DDS20-LB to:
618 618  
619 619  * Change Frequency band/ region.
620 620  
... ... @@ -622,7 +622,7 @@
622 622  
623 623  * Fix bugs.
624 624  
625 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/a5ue0nfrzqy9nz6/AABbvlATosDJKDwBmbirVbMYa?dl=0]]**
701 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
626 626  
627 627  Methods to Update Firmware:
628 628  
... ... @@ -630,8 +630,6 @@
630 630  
631 631  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
632 632  
633 -
634 -
635 635  = 6. FAQ =
636 636  
637 637  == 6.1  What is the frequency plan for DDS45-LB? ==
... ... @@ -714,8 +714,6 @@
714 714  
715 715  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
716 716  
717 -
718 -
719 719  = 9. ​Packing Info =
720 720  
721 721  
... ... @@ -733,8 +733,6 @@
733 733  
734 734  * Weight / pcs : g
735 735  
736 -
737 -
738 738  = 10. Support =
739 739  
740 740  
image-20230613133647-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +213.6 KB
Content
image-20230613133716-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +165.8 KB
Content
image-20230613140115-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +92.1 KB
Content
image-20230613140140-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +92.1 KB
Content
image-20230613143052-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +21.8 KB
Content
image-20230613143125-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content