Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 70.29
edited by Xiaoling
on 2023/06/13 09:55
Change comment: There is no comment for this version
To version 82.2
edited by Xiaoling
on 2023/06/14 16:25
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DDS75-LB -- LoRaWAN Distance Detection Sensor User Manual
1 +LDS12-LB -- LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,9 +1,12 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230612170349-1.png||height="656" width="656"]]
2 +[[image:image-20230614153353-1.png]]
3 3  
4 4  
5 5  
6 6  
7 +
8 +
9 +
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -15,24 +15,26 @@
15 15  
16 16  = 1. Introduction =
17 17  
18 -== 1.1 What is LoRaWAN Distance Detection Sensor ==
21 +== 1.1 What is LoRaWAN LiDAR ToF Distance Sensor ==
19 19  
20 20  
21 -The Dragino DDS75-LB is a (% style="color:blue" %)** LoRaWAN Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:blue" %)** ultrasonic sensing technology**(%%) for (% style="color:blue" %)**distance measurement**(%%), and (% style="color:blue" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The DDS75-LB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
24 +The Dragino LDS12-LB is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
22 22  
23 -It detects the distance(% style="color:blue" %)**  between the measured object and the sensor**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
26 +The LDS12-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
24 24  
25 -The LoRa wireless technology used in DDS75-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
26 26  
27 -DDS75-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 +The LoRa wireless technology used in LDS12-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 28  
29 -DDS75-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32 +LDS12-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 30  
31 -Each DDS75-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 +LDS12-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32 32  
33 -[[image:image-20230612170943-2.png||height="525" width="912"]]
36 +Each LDS12-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 34  
38 +[[image:image-20230614162334-2.png||height="468" width="800"]]
35 35  
40 +
36 36  == 1.2 ​Features ==
37 37  
38 38  
... ... @@ -39,18 +39,16 @@
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
41 41  * Ultra-low power consumption
42 -* Distance Detection by Ultrasonic technology
43 -* Flat object range 280mm - 7500mm
44 -* Accuracy: ±(1cm+S*0.3%) (S: Distance)
45 -* Cable Length : 25cm
47 +* Laser technology for distance detection
48 +* Measure Distance: 0.1m~~12m @ 90% Reflectivity
49 +* Accuracy :  ±5cm@(0.1-6m), ±1%@(6m-12m)
50 +* Monitor Battery Level
46 46  * Support Bluetooth v5.1 and LoRaWAN remote configure
47 47  * Support wireless OTA update firmware
48 48  * AT Commands to change parameters
49 49  * Downlink to change configure
50 -* IP66 Waterproof Enclosure
51 51  * 8500mAh Battery for long term use
52 52  
53 -
54 54  == 1.3 Specification ==
55 55  
56 56  
... ... @@ -79,73 +79,143 @@
79 79  * Sleep Mode: 5uA @ 3.3v
80 80  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
81 81  
85 +== 1.4 Suitable Container & Liquid ==
82 82  
83 83  
84 -== 1.4 Rated environmental conditions ==
88 +* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
89 +* Container shape is regular, and surface is smooth.
90 +* Container Thickness:
91 +** Pure metal material.  2~~8mm, best is 3~~5mm
92 +** Pure non metal material: <10 mm
93 +* Pure liquid without irregular deposition.
85 85  
95 +(% style="display:none" %)
86 86  
87 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
88 -|(% style="background-color:#d9e2f3; color:#0070c0; width:163px" %)**Item**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)(((
89 -**Minimum value**
90 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)(((
91 -**Typical value**
92 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:87px" %)(((
93 -**Maximum value**
94 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Unit**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Remarks**
95 -|(% style="width:174px" %)Storage temperature|(% style="width:86px" %)-25|(% style="width:66px" %)25|(% style="width:90px" %)80|(% style="width:48px" %)℃|(% style="width:203px" %)
96 -|(% style="width:174px" %)Storage humidity|(% style="width:86px" %) |(% style="width:66px" %)65%|(% style="width:90px" %)90%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
97 -|(% style="width:174px" %)Operating temperature|(% style="width:86px" %)-15|(% style="width:66px" %)25|(% style="width:90px" %)60|(% style="width:48px" %)℃|(% style="width:203px" %)
98 -|(% style="width:174px" %)Working humidity|(% style="width:86px" %)(((
99 -
97 +== 1.5 Install LDS12-LB ==
100 100  
101 -
102 -)))|(% style="width:66px" %)65%|(% style="width:90px" %)80%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
103 103  
100 +(% style="color:blue" %)**Step 1**(%%):  ** Choose the installation point.**
101 +
102 +LDS12-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
103 +
104 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
105 +
106 +
104 104  (((
105 -(% style="color:red" %)**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);       **
108 +(% style="color:blue" %)**Step 2**(%%):  **Polish the installation point.**
109 +)))
106 106  
107 -(% style="color:red" %)** b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
111 +(((
112 +For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
113 +)))
108 108  
109 -
115 +[[image:image-20230613143052-5.png]]
116 +
117 +
118 +No polish needed if the container is shine metal surface without paint or non-metal container.
119 +
120 +[[image:image-20230613143125-6.png]]
121 +
122 +
123 +(((
124 +(% style="color:blue" %)**Step3:   **(%%)**Test the installation point.**
110 110  )))
111 111  
112 -== 1.5 Effective measurement range Reference beam pattern ==
127 +(((
128 +Power on LDS12-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
129 +)))
113 113  
131 +(((
132 +It is necessary to put the coupling paste between the sensor and the container, otherwise LDS12-LB won't detect the liquid level.
133 +)))
114 114  
115 -(% style="color:blue" %)**1. The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
135 +(((
136 +After paste the LDS12-LB well, power on LDS12-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
137 +)))
116 116  
117 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852253176-749.png?rev=1.1||alt="1654852253176-749.png"]]
118 118  
140 +(((
141 +(% style="color:blue" %)**LED Status:**
142 +)))
119 119  
120 -(% style="color:blue" %)**2. The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
144 +* (((
145 +**Onboard LED**: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
146 +)))
121 121  
122 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852175653-550.png?rev=1.1||alt="1654852175653-550.png"]]
148 +* (((
149 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
150 +)))
151 +* (((
152 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
153 +)))
123 123  
155 +(((
156 +LDS12-LB will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
157 +)))
124 124  
159 +
160 +(((
161 +(% style="color:red" %)**Note :**(%%)** (% style="color:blue" %)Ultrasonic coupling paste(%%)**(% style="color:blue" %) (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
162 +)))
163 +
164 +
165 +(((
166 +(% style="color:blue" %)**Step4:   **(%%)**Install use Epoxy ab glue.**
167 +)))
168 +
169 +(((
170 +Prepare Eproxy AB glue.
171 +)))
172 +
173 +(((
174 +Put Eproxy AB glue in the sensor and press it hard on the container installation point.
175 +)))
176 +
177 +(((
178 +Reset LDS12-LB and see if the BLUE LED is slowly blinking.
179 +)))
180 +
181 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
182 +
183 +
184 +(((
185 +(% style="color:red" %)**Note :**
186 +
187 +(% style="color:red" %)**1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
188 +)))
189 +
190 +(((
191 +(% style="color:red" %)**2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
192 +)))
193 +
194 +
125 125  == 1.6 Applications ==
126 126  
127 127  
128 -* Horizontal distance measurement
129 -* Liquid level measurement
130 -* Parking management system
131 -* Object proximity and presence detection
132 -* Intelligent trash can management system
133 -* Robot obstacle avoidance
134 -* Automatic control
135 -* Sewer
136 -* Bottom water level monitoring
198 +* Smart liquid control solution
137 137  
200 +* Smart liquefied gas solution
138 138  
202 +== 1.7 Precautions ==
139 139  
140 -== 1.7 Sleep mode and working mode ==
141 141  
205 +* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
142 142  
207 +* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
208 +
209 +* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.
210 +
211 +(% style="display:none" %)
212 +
213 +== 1.8 Sleep mode and working mode ==
214 +
215 +
143 143  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
144 144  
145 145  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
146 146  
147 147  
148 -== 1.8 Button & LEDs ==
221 +== 1.9 Button & LEDs ==
149 149  
150 150  
151 151  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -164,14 +164,11 @@
164 164  )))
165 165  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
166 166  
240 +== 1.10 BLE connection ==
167 167  
168 168  
169 -== 1.9 BLE connection ==
243 +LDS12-LB support BLE remote configure.
170 170  
171 -
172 -DDS75-LB support BLE remote configure.
173 -
174 -
175 175  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
176 176  
177 177  * Press button to send an uplink
... ... @@ -181,12 +181,12 @@
181 181  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
182 182  
183 183  
184 -== 1.10 Pin Definitions ==
254 +== 1.11 Pin Definitions ==
185 185  
186 186  [[image:image-20230523174230-1.png]]
187 187  
188 188  
189 -== 1.11 Mechanical ==
259 +== 1.12 Mechanical ==
190 190  
191 191  
192 192  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -200,22 +200,18 @@
200 200  
201 201  (% style="color:blue" %)**Probe Mechanical:**
202 202  
273 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
203 203  
204 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-1.png?rev=1.1||alt="image-20220610172003-1.png"]]
205 205  
276 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
206 206  
207 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
208 208  
279 += 2. Configure LDS12-LB to connect to LoRaWAN network =
209 209  
210 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
211 -
212 -
213 -= 2. Configure DDS75-LB to connect to LoRaWAN network =
214 -
215 215  == 2.1 How it works ==
216 216  
217 217  
218 -The DDS75-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS75-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
284 +The LDS12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the LDS12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
219 219  
220 220  (% style="display:none" %) (%%)
221 221  
... ... @@ -226,12 +226,12 @@
226 226  
227 227  The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
228 228  
229 -[[image:image-20230612171032-3.png||height="492" width="855"]](% style="display:none" %)
295 +[[image:image-20230614162359-3.png||height="468" width="800"]](% style="display:none" %)
230 230  
231 231  
232 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS75-LB.
298 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from LDS12-LB.
233 233  
234 -Each DDS75-LB is shipped with a sticker with the default device EUI as below:
300 +Each LDS12-LB is shipped with a sticker with the default device EUI as below:
235 235  
236 236  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
237 237  
... ... @@ -260,10 +260,10 @@
260 260  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
261 261  
262 262  
263 -(% style="color:blue" %)**Step 2:**(%%) Activate on DDS75-LB
329 +(% style="color:blue" %)**Step 2:**(%%) Activate on LDS12-LB
264 264  
265 265  
266 -Press the button for 5 seconds to activate the DDS75-LB.
332 +Press the button for 5 seconds to activate the LDS12-LB.
267 267  
268 268  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
269 269  
... ... @@ -274,7 +274,7 @@
274 274  
275 275  
276 276  (((
277 -DDS75-LB will uplink payload via LoRaWAN with below payload format: 
343 +LDS12-LB will uplink payload via LoRaWAN with below payload format: 
278 278  )))
279 279  
280 280  (((
... ... @@ -285,7 +285,7 @@
285 285  |=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
286 286  **Size(bytes)**
287 287  )))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
288 -|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
354 +|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
289 289  [[Distance>>||anchor="H2.3.2A0Distance"]]
290 290  (unit: mm)
291 291  )))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
... ... @@ -292,13 +292,13 @@
292 292  [[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
293 293  )))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
294 294  
295 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
361 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
296 296  
297 297  
298 298  === 2.3.1  Battery Info ===
299 299  
300 300  
301 -Check the battery voltage for DDS75-LB.
367 +Check the battery voltage for LDS12-LB.
302 302  
303 303  Ex1: 0x0B45 = 2885mV
304 304  
... ... @@ -309,21 +309,19 @@
309 309  
310 310  
311 311  (((
312 -Get the distance. Flat object range 280mm - 7500mm.
378 +Get the distance. Flat object range 20mm - 2000mm.
313 313  )))
314 314  
315 315  (((
316 -For example, if the data you get from the register is 0x0B 0x05, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
382 +For example, if the data you get from the register is **0x06 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
317 317  
318 -(% style="color:#4472c4" %)**0B05(H) = 2821 (D) = 2821 mm.**
384 +(% style="color:blue" %)**0605(H) = 1541 (D) = 1541 mm.**
319 319  )))
320 320  
321 -
322 322  * If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
323 -* If the sensor value lower than 0x0118 (280mm), the sensor value will be invalid. All value lower than 280mm will be set to 0x0014(20mm) which means the value is invalid.
324 324  
389 +* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
325 325  
326 -
327 327  === 2.3.3  Interrupt Pin ===
328 328  
329 329  
... ... @@ -370,7 +370,7 @@
370 370  The payload decoder function for TTN V3 is here:
371 371  
372 372  (((
373 -DDS75-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
437 +LDS12-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
374 374  )))
375 375  
376 376  
... ... @@ -377,7 +377,7 @@
377 377  == 2.4  Uplink Interval ==
378 378  
379 379  
380 -The DDS75-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
444 +The LDS12-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
381 381  
382 382  
383 383  == 2.5  ​Show Data in DataCake IoT Server ==
... ... @@ -405,7 +405,7 @@
405 405  
406 406  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
407 407  
408 -(% style="color:blue" %)**Step 4**(%%)**: Search the DDS75-LB and add DevEUI.**
472 +(% style="color:blue" %)**Step 4**(%%)**: Search the LDS12-LB and add DevEUI.**
409 409  
410 410  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
411 411  
... ... @@ -415,23 +415,22 @@
415 415  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
416 416  
417 417  
418 -
419 419  == 2.6 Datalog Feature ==
420 420  
421 421  
422 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS75-LB will store the reading for future retrieving purposes.
485 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LDS12-LB will store the reading for future retrieving purposes.
423 423  
424 424  
425 425  === 2.6.1 Ways to get datalog via LoRaWAN ===
426 426  
427 427  
428 -Set PNACKMD=1, DDS75-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS75-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
491 +Set PNACKMD=1, LDS12-LB will wait for ACK for every uplink, when there is no LoRaWAN network,LDS12-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
429 429  
430 430  * (((
431 -a) DDS75-LB will do an ACK check for data records sending to make sure every data arrive server.
494 +a) LDS12-LB will do an ACK check for data records sending to make sure every data arrive server.
432 432  )))
433 433  * (((
434 -b) DDS75-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS75-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS75-LB gets a ACK, DDS75-LB will consider there is a network connection and resend all NONE-ACK messages.
497 +b) LDS12-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but LDS12-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if LDS12-LB gets a ACK, LDS12-LB will consider there is a network connection and resend all NONE-ACK messages.
435 435  )))
436 436  
437 437  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -442,7 +442,7 @@
442 442  === 2.6.2 Unix TimeStamp ===
443 443  
444 444  
445 -DDS75-LB uses Unix TimeStamp format based on
508 +LDS12-LB uses Unix TimeStamp format based on
446 446  
447 447  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
448 448  
... ... @@ -461,7 +461,7 @@
461 461  
462 462  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
463 463  
464 -Once DDS75-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS75-LB. If DDS75-LB fails to get the time from the server, DDS75-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
527 +Once LDS12-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LDS12-LB. If LDS12-LB fails to get the time from the server, LDS12-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
465 465  
466 466  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
467 467  
... ... @@ -489,7 +489,7 @@
489 489  )))
490 490  
491 491  (((
492 -Uplink Internal =5s，means DDS75-LB will send one packet every 5s. range 5~~255s.
555 +Uplink Internal =5s，means LDS12-LB will send one packet every 5s. range 5~~255s.
493 493  )))
494 494  
495 495  
... ... @@ -496,17 +496,17 @@
496 496  == 2.7 Frequency Plans ==
497 497  
498 498  
499 -The DDS75-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
562 +The LDS12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
500 500  
501 501  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
502 502  
503 503  
504 -= 3. Configure DDS75-LB =
567 += 3. Configure LDS12-LB =
505 505  
506 506  == 3.1 Configure Methods ==
507 507  
508 508  
509 -DDS75-LB supports below configure method:
572 +LDS12-LB supports below configure method:
510 510  
511 511  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
512 512  
... ... @@ -514,8 +514,6 @@
514 514  
515 515  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
516 516  
517 -
518 -
519 519  == 3.2 General Commands ==
520 520  
521 521  
... ... @@ -530,10 +530,10 @@
530 530  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
531 531  
532 532  
533 -== 3.3 Commands special design for DDS75-LB ==
594 +== 3.3 Commands special design for LDS12-LB ==
534 534  
535 535  
536 -These commands only valid for DDS75-LB, as below:
597 +These commands only valid for LDS12-LB, as below:
537 537  
538 538  
539 539  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -575,7 +575,7 @@
575 575  Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
576 576  )))
577 577  * (((
578 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
639 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
579 579  
580 580  
581 581  
... ... @@ -615,12 +615,10 @@
615 615  
616 616  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
617 617  
618 -
619 -
620 620  = 4. Battery & Power Consumption =
621 621  
622 622  
623 -DDS75-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
682 +LDS12-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
624 624  
625 625  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
626 626  
... ... @@ -629,7 +629,7 @@
629 629  
630 630  
631 631  (% class="wikigeneratedid" %)
632 -User can change firmware DDS75-LB to:
691 +User can change firmware LDS12-LB to:
633 633  
634 634  * Change Frequency band/ region.
635 635  
... ... @@ -637,79 +637,55 @@
637 637  
638 638  * Fix bugs.
639 639  
640 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/7la95mae0fn03xe/AACtzs-32m22TLb75B-iIr-Qa?dl=0]]**
699 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
641 641  
642 642  Methods to Update Firmware:
643 643  
644 -* (Recommanded way) OTA firmware update via wireless:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
703 +* (Recommanded way) OTA firmware update via wireless:  **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
645 645  
646 646  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
647 647  
648 -
649 -
650 650  = 6. FAQ =
651 651  
652 -== 6.1  What is the frequency plan for DDS75-LB? ==
709 +== 6.1 What is the frequency plan for LDS12-LB? ==
653 653  
654 654  
655 -DDS75-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
712 +LDS12-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
656 656  
657 657  
658 -== 6.2  Can I use DDS75-LB in condensation environment? ==
715 += 7. Trouble Shooting =
659 659  
717 +== 7.1 AT Command input doesn't work ==
660 660  
661 -DDS75-LB is not suitable to be used in condensation environment. Condensation on the DDS75-LB probe will affect the reading and always got 0.
662 662  
663 -
664 -= 7.  Trouble Shooting =
665 -
666 -== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
667 -
668 -
669 -It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
670 -
671 -
672 -== 7.2  AT Command input doesn't work ==
673 -
674 -
675 675  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
676 676  
677 677  
678 -== 7.3  Why does the sensor reading show 0 or "No sensor" ==
723 +== 7.2 Significant error between the output distant value of LiDAR and actual distance ==
679 679  
680 680  
681 -~1. The measurement object is very close to the sensor, but in the blind spot of the sensor.
726 +(((
727 +(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance (such as glass and water, etc.)
728 +)))
682 682  
683 -2. Sensor wiring is disconnected
730 +(((
731 +Troubleshooting: Please avoid use of this product under such circumstance in practice.
732 +)))
684 684  
685 -3. Not using the correct decoder
686 686  
735 +(((
736 +(% style="color:blue" %)**Cause ②**(%%)**: **The IR-pass filters are blocked.
737 +)))
687 687  
688 -== 7.4  Abnormal readings The gap between multiple readings is too large or the gap between the readings and the actual value is too large ==
739 +(((
740 +Troubleshooting: please use dry dust-free cloth to gently remove the foreign matter.
741 +)))
689 689  
690 690  
691 -1) Please check if there is something on the probe affecting its measurement (condensed water, volatile oil, etc.)
692 -
693 -2) Does it change with temperature, temperature will affect its measurement
694 -
695 -3) If abnormal data occurs, you can turn on DEBUG mode, Please use downlink or AT COMMAN to enter DEBUG mode.
696 -
697 -downlink command: (% style="color:blue" %)**F1 01**(%%), AT command: (% style="color:blue" %)**AT+DDEBUG=1**
698 -
699 -4) After entering the debug mode, it will send 20 pieces of data at a time, and you can send its uplink to us for analysis
700 -
701 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20230113135125-2.png?width=1057&height=136&rev=1.1||alt="image-20230113135125-2.png"]]
702 -
703 -
704 -Its original payload will be longer than other data. Even though it is being parsed, it can be seen that it is abnormal data.
705 -
706 -Please send the data to us for check.
707 -
708 -
709 709  = 8. Order Info =
710 710  
711 711  
712 -Part Number: (% style="color:blue" %)**DDS75-LB-XXX**
747 +Part Number: (% style="color:blue" %)**LDS12-LB-XXX**
713 713  
714 714  (% style="color:red" %)**XXX**(%%): **The default frequency band**
715 715  
... ... @@ -729,14 +729,12 @@
729 729  
730 730  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
731 731  
732 -
733 -
734 734  = 9. ​Packing Info =
735 735  
736 736  
737 737  (% style="color:#037691" %)**Package Includes**:
738 738  
739 -* DDS75-LB LoRaWAN Distance Detection Sensor x 1
772 +* LDS12-LB LoRaWAN LiDAR ToF Distance Sensor x 1
740 740  
741 741  (% style="color:#037691" %)**Dimension and weight**:
742 742  
... ... @@ -748,8 +748,6 @@
748 748  
749 749  * Weight / pcs : g
750 750  
751 -
752 -
753 753  = 10. Support =
754 754  
755 755  
image-20230613100900-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +184.0 KB
Content
image-20230613102426-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +89.3 KB
Content
image-20230613102459-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +89.3 KB
Content
image-20230613133647-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +213.6 KB
Content
image-20230613133716-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +165.8 KB
Content
image-20230613140115-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +92.1 KB
Content
image-20230613140140-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +92.1 KB
Content
image-20230613143052-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +21.8 KB
Content
image-20230613143125-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
image-20230614153353-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.1 KB
Content
image-20230614162334-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content
image-20230614162359-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content