Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 70.25
edited by Xiaoling
on 2023/06/13 09:13
Change comment: There is no comment for this version
To version 66.1
edited by Xiaoling
on 2023/05/30 13:59
Change comment: Uploaded new attachment "image-20230530135929-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DDS75-LB -- LoRaWAN Distance Detection Sensor User Manual
1 +SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual
Content
... ... @@ -1,9 +1,7 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230612170349-1.png||height="656" width="656"]]
2 +[[image:image-20230530084608-2.jpeg||height="707" width="707"]]
3 3  
4 4  
5 -
6 -
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -15,24 +15,29 @@
15 15  
16 16  = 1. Introduction =
17 17  
18 -== 1.1 What is LoRaWAN Distance Detection Sensor ==
16 +== 1.1 What is CPL03-LB LoRaWAN Pulse/Contact Sensor ==
19 19  
20 20  
21 -The Dragino DDS75-LB is a (% style="color:blue" %)** LoRaWAN Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:blue" %)** ultrasonic sensing technology**(%%) for (% style="color:blue" %)**distance measurement**(%%), and (% style="color:blue" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The DDS75-LB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
19 +The Dragino CPL03-LB is a (% style="color:blue" %)**LoRaWAN Contact Sensor**(%%) for Internet of Things solution. It detects dry contact status, open time, open counts, and then upload to IoT server via LoRaWAN wireless protocol.
22 22  
23 -It detects the distance(% style="color:blue" %)**  between the measured object and the sensor**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
21 +The CPL03-LB will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
24 24  
25 -The LoRa wireless technology used in DDS75-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
23 +The LoRa wireless technology used in CPL03-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 26  
27 -DDS75-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
25 +CPL03-LB (% style="color:blue" %)**supports open alarm feature**(%%), user can set open alarm for instant notice. CPL03-LB (% style="color:blue" %)**supports Datalog feature**(%%), it can save the data when there is no LoRaWAN network and uplink when network recover.
28 28  
29 -DDS75-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
27 +CPL03-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
30 30  
31 -Each DDS75-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
29 +CPL03-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
32 32  
33 -[[image:image-20230612170943-2.png||height="525" width="912"]]
31 +CPL03-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
34 34  
33 +Each CPL03-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
35 35  
35 +
36 +[[image:image-20230530111051-3.png||height="402" width="850"]]
37 +
38 +
36 36  == 1.2 ​Features ==
37 37  
38 38  
... ... @@ -39,47 +39,22 @@
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
41 41  * Ultra-low power consumption
42 -* Distance Detection by Ultrasonic technology
43 -* Flat object range 280mm - 7500mm
44 -* Accuracy: ±(1cm+S*0.3%) (S: Distance)
45 -* Cable Length : 25cm
45 +* Open/Close detect
46 +* Open/Close statistics
47 +* Temperature & Humidity alarm
48 +* supports open alarm feature
49 +* supports Datalog feature
46 46  * Support Bluetooth v5.1 and LoRaWAN remote configure
47 47  * Support wireless OTA update firmware
48 -* AT Commands to change parameters
52 +* Uplink on periodically and open/close event
49 49  * Downlink to change configure
50 -* IP66 Waterproof Enclosure
51 51  * 8500mAh Battery for long term use
52 52  
53 -== 1.3 Specification ==
54 54  
55 55  
56 -(% style="color:#037691" %)**Rated environmental conditions:**
58 +== 1.3 Specification ==
57 57  
58 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
59 -|(% style="background-color:#d9e2f3; color:#0070c0; width:163px" %)**Item**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)(((
60 -**Minimum value**
61 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)(((
62 -**Typical value**
63 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:87px" %)(((
64 -**Maximum value**
65 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Unit**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Remarks**
66 -|(% style="width:174px" %)Storage temperature|(% style="width:86px" %)-25|(% style="width:66px" %)25|(% style="width:90px" %)80|(% style="width:48px" %)℃|(% style="width:203px" %)
67 -|(% style="width:174px" %)Storage humidity|(% style="width:86px" %) |(% style="width:66px" %)65%|(% style="width:90px" %)90%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
68 -|(% style="width:174px" %)Operating temperature|(% style="width:86px" %)-15|(% style="width:66px" %)25|(% style="width:90px" %)60|(% style="width:48px" %)℃|(% style="width:203px" %)
69 -|(% style="width:174px" %)Working humidity|(% style="width:86px" %)(((
70 -
71 71  
72 -
73 -)))|(% style="width:66px" %)65%|(% style="width:90px" %)80%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
74 -
75 -(((
76 -(% style="color:red" %)**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);       **
77 -
78 -(% style="color:red" %)** b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
79 -
80 -
81 -)))
82 -
83 83  (% style="color:#037691" %)**Common DC Characteristics:**
84 84  
85 85  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -105,41 +105,26 @@
105 105  * Sleep Mode: 5uA @ 3.3v
106 106  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
107 107  
108 -== 1.4 Effective measurement range Reference beam pattern ==
109 109  
110 110  
111 -(% style="color:blue" %)**1. The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
88 +== 1.4 Applications ==
112 112  
113 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852253176-749.png?rev=1.1||alt="1654852253176-749.png"]]
114 114  
91 +* Open/Close Detection
92 +* Pulse meter application
93 +* Dry Contact Detection
115 115  
116 -(% style="color:blue" %)**2. The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
117 117  
118 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852175653-550.png?rev=1.1||alt="1654852175653-550.png"]]
119 119  
97 +== 1.5 Sleep mode and working mode ==
120 120  
121 -== 1.5 Applications ==
122 122  
123 -
124 -* Horizontal distance measurement
125 -* Liquid level measurement
126 -* Parking management system
127 -* Object proximity and presence detection
128 -* Intelligent trash can management system
129 -* Robot obstacle avoidance
130 -* Automatic control
131 -* Sewer
132 -* Bottom water level monitoring
133 -
134 -== 1.6 Sleep mode and working mode ==
135 -
136 -
137 137  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
138 138  
139 139  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
140 140  
141 141  
142 -== 1.7 Button & LEDs ==
105 +== 1.6 Button & LEDs ==
143 143  
144 144  
145 145  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -158,12 +158,14 @@
158 158  )))
159 159  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
160 160  
161 -== 1.8 BLE connection ==
162 162  
163 163  
164 -DDS75-LB support BLE remote configure.
126 +== 1.7 BLE connection ==
165 165  
166 166  
129 +CPL03-LB support BLE remote configure.
130 +
131 +
167 167  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
168 168  
169 169  * Press button to send an uplink
... ... @@ -173,16 +173,14 @@
173 173  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
174 174  
175 175  
176 -== 1.9 Pin Definitions ==
141 +== 1.8 Pin Definitions ==
177 177  
178 178  [[image:image-20230523174230-1.png]]
179 179  
180 180  
146 +== 1.9 Mechanical ==
181 181  
182 182  
183 -== 2.10 Mechanical ==
184 -
185 -
186 186  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
187 187  
188 188  
... ... @@ -192,24 +192,12 @@
192 192  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
193 193  
194 194  
195 -(% style="color:blue" %)**Probe Mechanical:**
158 += 2. Configure CPL03-LB to connect to LoRaWAN network =
196 196  
197 -
198 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-1.png?rev=1.1||alt="image-20220610172003-1.png"]]
199 -
200 -
201 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
202 -
203 -
204 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
205 -
206 -
207 -= 2. Configure DDS75-LB to connect to LoRaWAN network =
208 -
209 209  == 2.1 How it works ==
210 210  
211 211  
212 -The DDS75-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS75-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
163 +The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
213 213  
214 214  (% style="display:none" %) (%%)
215 215  
... ... @@ -220,12 +220,12 @@
220 220  
221 221  The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
222 222  
223 -[[image:image-20230612171032-3.png||height="492" width="855"]](% style="display:none" %)
174 +[[image:image-20230530111412-4.png||height="398" width="805"]](% style="display:none" %)
224 224  
225 225  
226 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS75-LB.
177 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
227 227  
228 -Each DDS75-LB is shipped with a sticker with the default device EUI as below:
179 +Each CPL03-LB is shipped with a sticker with the default device EUI as below:
229 229  
230 230  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
231 231  
... ... @@ -254,10 +254,10 @@
254 254  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
255 255  
256 256  
257 -(% style="color:blue" %)**Step 2:**(%%) Activate on DDS75-LB
208 +(% style="color:blue" %)**Step 2:**(%%) Activate on CPL03-LB
258 258  
259 259  
260 -Press the button for 5 seconds to activate the DDS75-LB.
211 +Press the button for 5 seconds to activate the CPL03-LB.
261 261  
262 262  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
263 263  
... ... @@ -264,170 +264,477 @@
264 264  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
265 265  
266 266  
267 -== 2.3  ​Uplink Payload ==
218 +== 2.3 ​Uplink Payload ==
268 268  
220 +=== 2.3.1 Device Status, FPORT~=5 ===
269 269  
222 +
223 +Users can use the downlink command(**0x26 01**) to ask CPL03-LB to send device configure detail, include device configure status. CPL03-LB will uplink a payload via FPort=5 to server.
224 +
225 +The Payload format is as below.
226 +
227 +
228 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
229 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
230 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
231 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
232 +
233 +Example parse in TTNv3
234 +
235 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652859749264-179.png?width=723&height=275&rev=1.1||alt="1652859749264-179.png"]]
236 +
237 +
238 +(% style="color:#037691" %)**Sensor Model**(%%): For CPL03-LB, this value is 0x0A
239 +
240 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
241 +
242 +(% style="color:#037691" %)**Frequency Band**:
243 +
244 +*0x01: EU868
245 +
246 +*0x02: US915
247 +
248 +*0x03: IN865
249 +
250 +*0x04: AU915
251 +
252 +*0x05: KZ865
253 +
254 +*0x06: RU864
255 +
256 +*0x07: AS923
257 +
258 +*0x08: AS923-1
259 +
260 +*0x09: AS923-2
261 +
262 +*0x0a: AS923-3
263 +
264 +*0x0b: CN470
265 +
266 +*0x0c: EU433
267 +
268 +*0x0d: KR920
269 +
270 +*0x0e: MA869
271 +
272 +
273 +(% style="color:#037691" %)**Sub-Band**:
274 +
275 +AU915 and US915:value 0x00 ~~ 0x08
276 +
277 +CN470: value 0x0B ~~ 0x0C
278 +
279 +Other Bands: Always 0x00
280 +
281 +
282 +(% style="color:#037691" %)**Battery Info**:
283 +
284 +Check the battery voltage.
285 +
286 +Ex1: 0x0B45 = 2885mV
287 +
288 +Ex2: 0x0B49 = 2889mV
289 +
290 +
291 +=== 2.3.2 Sensor Configuration, FPORT~=4 ===
292 +
293 +
294 +CPL03-LB will only send this command after getting the downlink command (0x26 02) from the server.
295 +
296 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
297 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
298 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**|(% style="width:158px" %)**1**
299 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: sec)|(% style="width:158px" %)Trigger mode
300 +
301 +* (((
302 +(% style="color:#037691" %)** TDC: (default: 0x001C20)**
303 +)))
304 +
270 270  (((
271 -DDS75-LB will uplink payload via LoRaWAN with below payload format: 
306 +Uplink interval for the total pulse count, default value is 0x001C20 which is 7200 seconds = 2 hours.
307 +
308 +
272 272  )))
273 273  
311 +* (((
312 +(% style="color:#037691" %)** Disalarm: (default: 0)**
313 +)))
314 +
274 274  (((
275 -Uplink payload includes in total 8 bytes.
316 +(% style="color:blue" %)** If Disalarm = 1**(%%), CPL03-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
276 276  )))
277 277  
278 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
279 -|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
280 -**Size(bytes)**
281 -)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
282 -|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
283 -[[Distance>>||anchor="H2.3.2A0Distance"]]
284 -(unit: mm)
285 -)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
286 -[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
287 -)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
319 +(((
320 +(% style="color:blue" %)** If Disalarm = 0**(%%), CPL03-LB will send uplink at every TDC periodically.
288 288  
289 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
322 +
323 +)))
290 290  
325 +* (((
326 +(% style="color:#037691" %)** Keep Status & Keep Time**
327 +)))
291 291  
292 -=== 2.3.1  Battery Info ===
329 +(((
330 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.5AlarmBaseonTimeout"]]
293 293  
332 +
333 +)))
294 294  
295 -Check the battery voltage for DDS75-LB.
335 +* (((
336 +(% style="color:#037691" %)** Trigger mode (default: 0)**
337 +)))
296 296  
297 -Ex1: 0x0B45 = 2885mV
339 +(((
340 +(% style="color:blue" %)** If Trigger mode = 0**(%%), count close to open event.
341 +)))
298 298  
299 -Ex2: 0x0B49 = 2889mV
343 +(((
344 +(% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
345 +)))
300 300  
347 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860064987-743.png?width=730&height=152&rev=1.1||alt="1652860064987-743.png"]]
301 301  
302 -=== 2.3.2  Distance ===
303 303  
350 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860079526-831.png?width=729&height=209&rev=1.1||alt="1652860079526-831.png"]]
304 304  
352 +
353 +=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
354 +
355 +
305 305  (((
306 -Get the distance. Flat object range 280mm - 7500mm.
357 +(((
358 +CPL03-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL03-LB will:
307 307  )))
360 +)))
308 308  
309 309  (((
310 -For example, if the data you get from the register is 0x0B 0x05, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
363 +(((
364 +periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
365 +)))
366 +)))
311 311  
312 -(% style="color:#4472c4" %)**0B05(H) = 2821 (D) = 2821 mm.**
368 +(((
369 +(((
370 +Uplink Payload totals 11 bytes.
313 313  )))
372 +)))
314 314  
374 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
375 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
376 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
377 +|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
315 315  
316 -* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
317 -* If the sensor value lower than 0x0118 (280mm), the sensor value will be invalid. All value lower than 280mm will be set to 0x0014(20mm) which means the value is invalid.
379 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
380 +|=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
381 +|(% style="width:60px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:228px" %)**1**|(% style="width:146px" %)**1**
382 +|(% style="width:76px" %)Value|(% style="width:80px" %)Calculate Flag|(% style="width:208px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:136px" %)Contact Status: 0: Open, 1: Close
318 318  
384 +* (((
385 +(% style="color:#037691" %)** Calculate Flag**
386 +)))
319 319  
320 -=== 2.3.3  Interrupt Pin ===
388 +(((
389 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
390 +)))
321 321  
392 +(((
393 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
394 +)))
322 322  
323 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
396 +(((
397 +Default value: 0. 
398 +)))
324 324  
325 -**Example:**
400 +(((
401 +Range (6 bits): (b)000000 ~~ (b) 111111
402 +)))
326 326  
327 -0x00: Normal uplink packet.
404 +(((
405 +Refer: [[Set Calculate Flag>>||anchor="H3.3.8Setthecalculateflag"]]
328 328  
329 -0x01: Interrupt Uplink Packet.
407 +
408 +)))
330 330  
410 +* (((
411 +(% style="color:#037691" %)** Alarm**
412 +)))
331 331  
332 -=== 2.3.4  DS18B20 Temperature sensor ===
414 +(((
415 +See [[Alarm Base on Timeout>>||anchor="H3.3.5AlarmBaseonTimeout"]]
333 333  
417 +
418 +)))
334 334  
335 -This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
420 +* (((
421 +(% style="color:#037691" %)** Contact Status**
422 +)))
336 336  
337 -**Example**:
424 +(((
425 +0: Open
426 +)))
338 338  
339 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
428 +(((
429 +1: Close
340 340  
341 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
431 +
432 +)))
342 342  
434 +* (((
435 +(% style="color:#037691" %)** Total pulse**
436 +)))
343 343  
344 -=== 2.3.5  Sensor Flag ===
438 +(((
439 +Total pulse/counting base on dry [[contact trigger event>>||anchor="H2.3.2SensorConfiguration2CFPORT3D4"]]
440 +)))
345 345  
442 +(((
443 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
346 346  
445 +
446 +)))
447 +
448 +* (((
449 +(% style="color:#037691" %)** The last open duration**
450 +)))
451 +
347 347  (((
348 -0x01: Detect Ultrasonic Sensor
453 +Dry Contact last open duration.
349 349  )))
350 350  
351 351  (((
352 -0x00: No Ultrasonic Sensor
457 +Unit: min.
353 353  )))
354 354  
460 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860403792-491.png?width=735&height=153&rev=1.1||alt="1652860403792-491.png"]]
355 355  
356 -=== 2.3.6  Decode payload in The Things Network ===
357 357  
463 +=== 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
358 358  
359 -While using TTN network, you can add the payload format to decode the payload.
360 360  
361 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
466 +(% style="color:red" %)**Note:**
362 362  
363 -The payload decoder function for TTN V3 is here:
468 +* Firmware support for this mode is not released. If users want to test, please contact Dragino support.
469 +* Users need to run (% style="color:blue" %)**AT+MOD=3**(%%) to support this model after updating the firmware.
470 +* This mode doesn't support Historical Events and Datalog features.
364 364  
472 +(% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
473 +
474 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-1.png?width=720&height=628&rev=1.1||alt="image-20221013153352-1.png"]]
475 +
476 +
477 +(% style="color:blue" %)**Payload:**
478 +
479 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-2.png?width=1215&height=167&rev=1.1||alt="image-20221013153352-2.png"]]
480 +
481 +
482 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
483 +|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:61px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**3**
484 +|(% style="width:93px" %)Value|(% style="width:59px" %)Status|(% style="width:98px" %)(((
485 +Port1 Total Pulse(PB14)
486 +)))|(% style="width:96px" %)(((
487 +Port2 Total Pulse(PB15)
488 +)))|(% style="width:94px" %)(((
489 +Port3 Total Pulse(PA4)
490 +)))
491 +
492 +(% style="color:blue" %)**Status:**
493 +
494 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:257px" %)
495 +|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**6**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**
496 +|(% style="width:75px" %)Value|(% style="width:111px" %)Calculate Flag|(% style="width:68px" %)Reserve
497 +
498 +(% style="color:red" %)**Max COUNT for each port is 16777215. Exceed this number will reset to 1.**
499 +
500 +
501 +(% style="color:blue" %)**Related AT Command:**
502 +
503 +(% style="color:#037691" %)**AT+TTRMOD1:  Port1 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
504 +
505 + AT+TTRMOD1=0  Downlink Command: 0xA4 01 00
506 +
507 + AT+TTRMOD1=1  Downlink Command: 0xA4 01 01
508 +
509 +
510 +(% style="color:#037691" %)**AT+TTRMOD2:  Port2 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
511 +
512 + AT+TTRMOD1=0  Downlink Command: 0xA4 02 00
513 +
514 + AT+TTRMOD1=1  Downlink Command: 0xA4 02 01
515 +
516 +
517 +(% style="color:#037691" %)**AT+TTRMOD3:  Port3 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
518 +
519 + AT+TTRMOD1=0  Downlink Command: 0xA4 03 00
520 +
521 + AT+TTRMOD1=1  Downlink Command: 0xA4 03 01
522 +
523 +
524 +(% style="color:#037691" %)**AT+CALCFLAG:  Calculate Flag ( Default : 0 )**
525 +
526 + AT+CALCFLAG=aa
527 +
528 +
529 +(% style="color:blue" %)**Downlink Command: 0xA5 aa**
530 +
531 +(% style="color:#037691" %)**AT+COUNTMOD:  Accumulative Mode;  0: Accumulative (Default),1: Reset after uplink.**
532 +
533 + AT+COUNTMOD=0 Downlink Command: 0x0B 00
534 +
535 + AT+COUNTMOD=1 Downlink Command: 0x0B 01
536 +
537 +
538 +(% style="color:#037691" %)**AT+SETCNT:  Set count value**
539 +
540 + AT+SETCNT=1,aa  Downlink Command: 0xA6 01 aa aa aa
541 +
542 + AT+SETCNT=2,aa  Downlink Command: 0xA6 02 aa aa aa
543 +
544 + AT+SETCNT=3,aa  Downlink Command: 0xA6 03 aa aa aa
545 +
546 +
547 +(% style="color:blue" %)**Decode:  **(%%)[[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
548 +
549 +
550 +=== 2.3.5 Historical Door Open/Close Event, FPORT~=3 ===
551 +
552 +
365 365  (((
366 -DDS75-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
554 +CPL03-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
367 367  )))
368 368  
557 +(((
558 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
559 +)))
369 369  
370 -== 2.4  Uplink Interval ==
561 +* (((
562 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL03-LB will send max bytes according to the current DR and Frequency bands.
563 +)))
371 371  
565 +(((
566 +For example, in the US915 band, the max payload for different DR is:
567 +)))
372 372  
373 -The DDS75-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
569 +(((
570 +a) (% style="color:blue" %)**DR0**(%%): max is 11 bytes so one entry of data
571 +)))
374 374  
573 +(((
574 +b) (% style="color:blue" %)**DR1**(%%): max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
575 +)))
375 375  
376 -== 2.5  ​Show Data in DataCake IoT Server ==
577 +(((
578 +c) (% style="color:blue" %)**DR2**(%%): total payload includes 11 entries of data
579 +)))
377 377  
581 +(((
582 +d) (% style="color:blue" %)**DR3**(%%): total payload includes 22 entries of data.
583 +)))
378 378  
379 379  (((
380 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
586 +If CPL03-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
587 +
588 +
381 381  )))
382 382  
591 +(% style="color:blue" %)** Downlink:**
592 +
593 +(% class="box" %)
383 383  (((
595 +**0x31 61 E9 3A D4 61 E9 3D E0 05**
596 +)))
597 +
598 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861353248-624.png?width=720&height=189&rev=1.1||alt="1652861353248-624.png"]]
599 +
600 +
601 +(% style="color:blue" %)** Uplink:**
602 +
603 +(% class="box" %)
604 +(((
605 +**0E 00 23 E6 00 00 00 61 E9 3B 04 0E 00 23 E6 00 00 00 61 E9 3B 25 0D 00 00 00 00 00 00 61 E9 3B C8 0E 00 00 02 00 00 00 61 E9 3B D4 0E 00 00 06 00 00 00 61 E9 3B DB 01 00 00 00 00 00 00 61 E9 3C 91 01 00 00 00 00 00 00 61 E9 3C A1 0D 00 00 00 00 00 00 61 E9 3C BC 0E 00 00 07 00 00 00 61 E9 3C D6 00 00 00 00 00 00 00 61 E9 3D A6**
606 +)))
607 +
608 +(% style="color:#037691" %)** **
609 +
610 +(% style="color:#037691" %)**Parsed Value:**
611 +
612 +(((
613 +[ALARM, PIN_STATUS, TOTAL_PULSE, CALCULATE_FLAG, LAST_OPEN_DURATION, TIME]
614 +)))
615 +
616 +(((
384 384  
385 385  )))
386 386  
387 387  (((
388 -(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
621 +[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:35:48],
389 389  )))
390 390  
391 391  (((
392 -(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
625 +[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:36:21],
393 393  )))
394 394  
628 +(((
629 +[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:39:04],
630 +)))
395 395  
396 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
632 +(((
633 +[TRUE, CLOSE, 2, 3, 0, 2022-01-20 10:39:16],
634 +)))
397 397  
636 +(((
637 +[TRUE, CLOSE, 6, 3, 0, 2022-01-20 10:39:23],
638 +)))
398 398  
399 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
640 +(((
641 +[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:25],
642 +)))
400 400  
644 +(((
645 +[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:41],
646 +)))
401 401  
402 -(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
648 +(((
649 +[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:43:08],
650 +)))
403 403  
404 -(% style="color:blue" %)**Step 4**(%%)**: Search the DDS75-LB and add DevEUI.**
652 +(((
653 +[TRUE, CLOSE, 7, 3, 0, 2022-01-20 10:43:34],
654 +)))
405 405  
406 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
656 +(((
657 +[FALSE, CLOSE, 0, 0, 0, 2022-01-20 10:47:02],
407 407  
659 +
660 +)))
408 408  
409 -After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
662 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861480446-216.png?rev=1.1||alt="1652861480446-216.png"]]
410 410  
411 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
412 412  
665 +== 2.4 Payload Decoder file ==
413 413  
414 414  
415 -== 2.6 Datalog Feature ==
668 +In TTN, use can add a custom payload so it shows friendly reading
416 416  
670 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
417 417  
418 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS75-LB will store the reading for future retrieving purposes.
419 419  
673 +== 2.5 Datalog Feature ==
420 420  
421 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
422 422  
676 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
423 423  
424 -Set PNACKMD=1, DDS75-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS75-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
425 425  
679 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
680 +
681 +
682 +Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
683 +
426 426  * (((
427 -a) DDS75-LB will do an ACK check for data records sending to make sure every data arrive server.
685 +a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
428 428  )))
429 429  * (((
430 -b) DDS75-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS75-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS75-LB gets a ACK, DDS75-LB will consider there is a network connection and resend all NONE-ACK messages.
688 +b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
431 431  )))
432 432  
433 433  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -435,10 +435,10 @@
435 435  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
436 436  
437 437  
438 -=== 2.6.2 Unix TimeStamp ===
696 +=== 2.5.2 Unix TimeStamp ===
439 439  
440 440  
441 -DDS75-LB uses Unix TimeStamp format based on
699 +CPL03-LB uses Unix TimeStamp format based on
442 442  
443 443  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
444 444  
... ... @@ -452,17 +452,17 @@
452 452  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
453 453  
454 454  
455 -=== 2.6.3 Set Device Time ===
713 +=== 2.5.3 Set Device Time ===
456 456  
457 457  
458 458  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
459 459  
460 -Once DDS75-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS75-LB. If DDS75-LB fails to get the time from the server, DDS75-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
718 +Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
461 461  
462 462  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
463 463  
464 464  
465 -=== 2.6.4 Poll sensor value ===
723 +=== 2.5.4 Poll sensor value ===
466 466  
467 467  
468 468  Users can poll sensor values based on timestamps. Below is the downlink command.
... ... @@ -485,7 +485,7 @@
485 485  )))
486 486  
487 487  (((
488 -Uplink Internal =5s，means DDS75-LB will send one packet every 5s. range 5~~255s.
746 +Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
489 489  )))
490 490  
491 491  
... ... @@ -492,24 +492,24 @@
492 492  == 2.7 Frequency Plans ==
493 493  
494 494  
495 -The DDS75-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
753 +The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
496 496  
497 497  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
498 498  
499 499  
500 -= 3. Configure DDS75-LB =
758 += 3. Configure CPL03-LB =
501 501  
502 502  == 3.1 Configure Methods ==
503 503  
504 504  
505 -DDS75-LB supports below configure method:
763 +CPL03-LB supports below configure method:
506 506  
507 507  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
508 -
509 509  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
510 -
511 511  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
512 512  
769 +
770 +
513 513  == 3.2 General Commands ==
514 514  
515 515  
... ... @@ -516,7 +516,6 @@
516 516  These commands are to configure:
517 517  
518 518  * General system settings like: uplink interval.
519 -
520 520  * LoRaWAN protocol & radio related command.
521 521  
522 522  They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
... ... @@ -524,10 +524,10 @@
524 524  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
525 525  
526 526  
527 -== 3.3 Commands special design for DDS75-LB ==
784 +== 3.3 Commands special design for CPL03-LB ==
528 528  
529 529  
530 -These commands only valid for DDS75-LB, as below:
787 +These commands only valid for CPL03-LB, as below:
531 531  
532 532  
533 533  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -569,12 +569,232 @@
569 569  Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
570 570  )))
571 571  * (((
572 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
829 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
830 +
831 +
832 +
573 573  )))
574 574  
575 -=== 3.3.2 Set Interrupt Mode ===
835 +=== 3.3.2 Quit AT Command ===
576 576  
577 577  
838 +Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
839 +
840 +(% style="color:blue" %)**AT Command: AT+DISAT**
841 +
842 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
843 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
844 +|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
845 +
846 +(% style="color:blue" %)**Downlink Command:**
847 +
848 +No downlink command for this feature.
849 +
850 +
851 +=== 3.3.3 Get Device Status ===
852 +
853 +
854 +Send a LoRaWAN downlink to ask device send Alarm settings.
855 +
856 +(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
857 +
858 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
859 +
860 +
861 +=== 3.3.4 Enable / Disable Alarm ===
862 +
863 +
864 +Feature: Enable/Disable Alarm for open/close event. Default value 0.
865 +
866 +(% style="color:blue" %)**AT Command:**
867 +
868 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
869 +|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
870 +|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
871 +|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
872 +
873 +(% style="color:blue" %)**Downlink Command:**
874 +
875 +**0xA7 01**  ~/~/  Same As AT+DISALARM=1
876 +
877 +**0xA7 00    ** ~/~/  Same As AT+DISALARM=0
878 +
879 +
880 +=== 3.3.5 Alarm Base on Timeout ===
881 +
882 +
883 +(((
884 +CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
885 +)))
886 +
887 +
888 +(((
889 +(% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
890 +)))
891 +
892 +(((
893 +**Keep Status = 1**: Monitor Close to Open event
894 +)))
895 +
896 +(((
897 +**Keep Status = 0**: Monitor Open to Close event
898 +)))
899 +
900 +
901 +(((
902 +(% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
903 +)))
904 +
905 +(((
906 +Range 0 ~~ 65535(0xFFFF) seconds.
907 +)))
908 +
909 +(((
910 +If** keep time = 0**, Disable Alarm Base on Timeout feature.
911 +)))
912 +
913 +(((
914 +If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
915 +)))
916 +
917 +
918 +(((
919 +(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
920 +)))
921 +
922 +(((
923 +(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
924 +)))
925 +
926 +(((
927 +(% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
928 +)))
929 +
930 +
931 +(((
932 +(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
933 +)))
934 +
935 +(((
936 +**Command: 0xA9 aa bb cc**
937 +)))
938 +
939 +(((
940 +**A9: **Command Type Code
941 +)))
942 +
943 +(((
944 +**aa: **status to be monitored
945 +)))
946 +
947 +(((
948 +**bb cc: **timeout.
949 +)))
950 +
951 +
952 +(((
953 +If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
954 +)))
955 +
956 +(((
957 +Or
958 +)))
959 +
960 +(((
961 +0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
962 +)))
963 +
964 +
965 +=== 3.3.6 Clear Flash Record ===
966 +
967 +
968 +Feature: Clear flash storage for data log feature.
969 +
970 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
971 +
972 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
973 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
974 +|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
975 +
976 +(((
977 +(% style="color:blue" %)**Downlink Command:**
978 +)))
979 +
980 +(((
981 +* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
982 +)))
983 +
984 +
985 +
986 +=== 3.3.7 Set trigger mode ===
987 +
988 +
989 +Feature: Set the trigger interrupt mode.
990 +
991 +(% style="color:blue" %)**AT Command: AT+TTRMOD**
992 +
993 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
994 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
995 +|(% style="width:157px" %)(((
996 +AT+TTRMOD=1
997 +)))|(% style="width:156px" %)Count and trigger from open to close (rising edge)|(% style="width:89px" %)(((
998 +(((
999 +OK
1000 +)))
1001 +)))
1002 +|(% style="width:157px" %)(((
1003 +AT+TTRMOD=0
1004 +)))|(% style="width:156px" %)Count and trigger from close to open (falling edge)|(% style="width:89px" %)(((
1005 +OK
1006 +)))
1007 +
1008 +(% style="color:blue" %)**Downlink Command:**
1009 +
1010 +* **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
1011 +
1012 +
1013 +
1014 +=== 3.3.8 Set the calculate flag ===
1015 +
1016 +
1017 +Feature: Set the calculate flag
1018 +
1019 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
1020 +
1021 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
1022 +|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1023 +|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
1024 +|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
1025 +
1026 +(% style="color:blue" %)**Downlink Command:**
1027 +
1028 +* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
1029 +
1030 +
1031 +
1032 +=== 3.3.9 Set count number ===
1033 +
1034 +
1035 +Feature: Manually set the count number
1036 +
1037 +(% style="color:blue" %)**AT Command: AT+SETCNT**
1038 +
1039 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
1040 +|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1041 +|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
1042 +|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
1043 +
1044 +(% style="color:blue" %)**Downlink Command:**
1045 +
1046 +* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
1047 +
1048 +* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
1049 +
1050 +
1051 +
1052 +=== 3.3.10 Set Interrupt Mode ===
1053 +
1054 +
578 578  Feature, Set Interrupt mode for PA8 of pin.
579 579  
580 580  When AT+INTMOD=0 is set, PA8 is used as a digital input port.
... ... @@ -606,101 +606,84 @@
606 606  
607 607  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
608 608  
609 -= 4. Battery & Power Consumption =
610 610  
611 611  
612 -DDS75-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1088 +=== 3.3.11 Set Power Output Duration ===
613 613  
614 -[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
615 615  
1091 +Control the output duration 5V . Before each sampling, device will
616 616  
617 -= 5. OTA Firmware update =
1093 +~1. first enable the power output to external sensor,
618 618  
1095 +2. keep it on as per duration, read sensor value and construct uplink payload
619 619  
620 -(% class="wikigeneratedid" %)
621 -User can change firmware DDS75-LB to:
1097 +3. final, close the power output.
622 622  
623 -* Change Frequency band/ region.
1099 +(% style="color:blue" %)**AT Command: AT+5VT**
624 624  
625 -* Update with new features.
1101 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1102 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1103 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
1104 +OK
1105 +|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
626 626  
627 -* Fix bugs.
1107 +(% style="color:blue" %)**Downlink Command: 0x07**
628 628  
629 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/7la95mae0fn03xe/AACtzs-32m22TLb75B-iIr-Qa?dl=0]]**
1109 +Format: Command Code (0x07) followed by 2 bytes.
630 630  
631 -Methods to Update Firmware:
1111 +The first and second bytes are the time to turn on.
632 632  
633 -* (Recommanded way) OTA firmware update via wireless:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
1113 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
634 634  
635 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1115 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
636 636  
637 -= 6. FAQ =
638 638  
639 639  
640 -== 6.1  What is the frequency plan for DDS75-LB? ==
1119 += 4. Battery & Power Consumption =
641 641  
642 642  
643 -DDS75-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
1122 +CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
644 644  
1124 +[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
645 645  
646 -== 6.2  Can I use DDS75-LB in condensation environment? ==
647 647  
1127 += 5. OTA Firmware update =
648 648  
649 -DDS75-LB is not suitable to be used in condensation environment. Condensation on the DDS75-LB probe will affect the reading and always got 0.
650 650  
1130 +(% class="wikigeneratedid" %)
1131 +User can change firmware CPL03-LB to:
651 651  
652 -= 7.  Trouble Shooting =
1133 +* Change Frequency band/ region.
653 653  
654 -== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
1135 +* Update with new features.
655 655  
1137 +* Fix bugs.
656 656  
657 -It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
1139 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
658 658  
1141 +Methods to Update Firmware:
659 659  
660 -== 7.2  AT Command input doesn't work ==
1143 +* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
661 661  
1145 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
662 662  
663 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
664 664  
665 665  
666 -== 7.3  Why does the sensor reading show 0 or "No sensor" ==
1149 += 6. FAQ =
667 667  
1151 +== 6.1  AT Commands input doesn't work ==
668 668  
669 -~1. The measurement object is very close to the sensor, but in the blind spot of the sensor.
670 670  
671 -2. Sensor wiring is disconnected
1154 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
672 672  
673 -3. Not using the correct decoder
674 674  
1157 += 7. Order Info =
675 675  
676 -== 7.4  Abnormal readings The gap between multiple readings is too large or the gap between the readings and the actual value is too large ==
677 677  
1160 +Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
678 678  
679 -1) Please check if there is something on the probe affecting its measurement (condensed water, volatile oil, etc.)
1162 +(% style="color:red" %)**XXX**(%%): The default frequency band
680 680  
681 -2) Does it change with temperature, temperature will affect its measurement
682 -
683 -3) If abnormal data occurs, you can turn on DEBUG mode, Please use downlink or AT COMMAN to enter DEBUG mode.
684 -
685 -downlink command: (% style="color:blue" %)**F1 01**(%%), AT command: (% style="color:blue" %)**AT+DDEBUG=1**
686 -
687 -4) After entering the debug mode, it will send 20 pieces of data at a time, and you can send its uplink to us for analysis
688 -
689 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20230113135125-2.png?width=1057&height=136&rev=1.1||alt="image-20230113135125-2.png"]]
690 -
691 -
692 -Its original payload will be longer than other data. Even though it is being parsed, it can be seen that it is abnormal data.
693 -
694 -Please send the data to us for check.
695 -
696 -
697 -= 8. Order Info =
698 -
699 -
700 -Part Number: (% style="color:blue" %)**DDS75-LB-XXX**
701 -
702 -(% style="color:red" %)**XXX**(%%): **The default frequency band**
703 -
704 704  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
705 705  
706 706  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
... ... @@ -718,12 +718,13 @@
718 718  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
719 719  
720 720  
721 -= 9. ​Packing Info =
722 722  
1182 += 8. ​Packing Info =
723 723  
1184 +
724 724  (% style="color:#037691" %)**Package Includes**:
725 725  
726 -* DDS75-LB LoRaWAN Distance Detection Sensor x 1
1187 +* CPL03-LB LoRaWAN Pulse/Contact Sensor
727 727  
728 728  (% style="color:#037691" %)**Dimension and weight**:
729 729  
... ... @@ -736,9 +736,10 @@
736 736  * Weight / pcs : g
737 737  
738 738  
739 -= 10. Support =
740 740  
1201 += 9. Support =
741 741  
1203 +
742 742  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
743 743  
744 744  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
image-20230530140053-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content
image-20230612170349-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -164.2 KB
Content
image-20230612170943-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.4 KB
Content
image-20230612171032-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.4 KB
Content