Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 67.2
edited by Xiaoling
on 2023/05/30 14:01
Change comment: There is no comment for this version
To version 62.5
edited by Xiaoling
on 2023/05/30 10:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SW3L-LB -- LoRaWAN Flow Sensor User Manual
1 +CPL03-LB -- LoRaWAN Pulse/Contact Sensor User Manual
Content
... ... @@ -1,10 +1,7 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230530140053-1.jpeg||height="645" width="645"]]
2 +[[image:image-20230530084608-2.jpeg||height="707" width="707"]]
3 3  
4 4  
5 -
6 -
7 -
8 8  **Table of Contents：**
9 9  
10 10  {{toc/}}
... ... @@ -36,9 +36,6 @@
36 36  Each CPL03-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37 37  
38 38  
39 -[[image:image-20230530135919-1.png||height="404" width="806"]]
40 -
41 -
42 42  == 1.2 ​Features ==
43 43  
44 44  
... ... @@ -99,7 +99,7 @@
99 99  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
100 100  
101 101  
102 -== 1.6 Button & LEDs ==
96 +== 1.5 Button & LEDs ==
103 103  
104 104  
105 105  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -118,7 +118,7 @@
118 118  )))
119 119  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
120 120  
121 -== 1.7 BLE connection ==
115 +== 1.6 BLE connection ==
122 122  
123 123  
124 124  CPL03-LB support BLE remote configure.
... ... @@ -133,12 +133,12 @@
133 133  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
134 134  
135 135  
136 -== 1.8 Pin Definitions ==
130 +== 1.7 Pin Definitions ==
137 137  
138 138  [[image:image-20230523174230-1.png]]
139 139  
140 140  
141 -== 1.9 Mechanical ==
135 +== 1.8 Mechanical ==
142 142  
143 143  
144 144  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -157,7 +157,6 @@
157 157  
158 158  The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
159 159  
160 -(% style="display:none" %) (%%)
161 161  
162 162  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
163 163  
... ... @@ -166,9 +166,7 @@
166 166  
167 167  The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
168 168  
169 -[[image:image-20230530135929-2.png||height="404" width="806"]](% style="display:none" %)
170 170  
171 -
172 172  (% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
173 173  
174 174  Each CPL03-LB is shipped with a sticker with the default device EUI as below:
... ... @@ -286,7 +286,7 @@
286 286  === 2.3.2 Sensor Configuration, FPORT~=4 ===
287 287  
288 288  
289 -CPL03-LB will only send this command after getting the downlink command (0x26 02) from the server.
280 +CPL01 will only send this command after getting the downlink command (0x26 02) from the server.
290 290  
291 291  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
292 292  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
... ... @@ -308,11 +308,11 @@
308 308  )))
309 309  
310 310  (((
311 -(% style="color:blue" %)** If Disalarm = 1**(%%), CPL03-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
302 +(% style="color:blue" %)** If Disalarm = 1**(%%), CPL01 will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
312 312  )))
313 313  
314 314  (((
315 -(% style="color:blue" %)** If Disalarm = 0**(%%), CPL03-LB will send uplink at every TDC periodically.
306 +(% style="color:blue" %)** If Disalarm = 0**(%%), CPL01 will send uplink at every TDC periodically.
316 316  
317 317  
318 318  )))
... ... @@ -322,7 +322,7 @@
322 322  )))
323 323  
324 324  (((
325 -Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.5AlarmBaseonTimeout"]]
316 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.5AlarmBaseonTimeout"]]
326 326  
327 327  
328 328  )))
... ... @@ -339,10 +339,10 @@
339 339  (% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
340 340  )))
341 341  
342 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860064987-743.png?width=730&height=152&rev=1.1||alt="1652860064987-743.png"]]
333 +[[image:1652860064987-743.png||height="152" width="730"]]
343 343  
344 344  
345 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860079526-831.png?width=729&height=209&rev=1.1||alt="1652860079526-831.png"]]
336 +[[image:1652860079526-831.png||height="209" width="729"]]
346 346  
347 347  
348 348  === 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
... ... @@ -350,13 +350,13 @@
350 350  
351 351  (((
352 352  (((
353 -CPL03-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL03-LB will:
344 +CPL01 will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL01 will:
354 354  )))
355 355  )))
356 356  
357 357  (((
358 358  (((
359 -periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
350 +periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].
360 360  )))
361 361  )))
362 362  
... ... @@ -369,7 +369,7 @@
369 369  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
370 370  |=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
371 371  |(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
372 -|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
363 +|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]
373 373  
374 374  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
375 375  |=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
... ... @@ -397,7 +397,7 @@
397 397  )))
398 398  
399 399  (((
400 -Refer: [[Set Calculate Flag>>||anchor="H3.3.8Setthecalculateflag"]]
391 +Refer: [[Set Calculate Flag>>||anchor="H3.9Setthecalculateflag"]]
401 401  
402 402  
403 403  )))
... ... @@ -407,7 +407,7 @@
407 407  )))
408 408  
409 409  (((
410 -See [[Alarm Base on Timeout>>||anchor="H3.3.5AlarmBaseonTimeout"]]
401 +See [[Alarm Base on Timeout>>||anchor="H3.5AlarmBaseonTimeout"]]
411 411  
412 412  
413 413  )))
... ... @@ -452,7 +452,7 @@
452 452  Unit: min.
453 453  )))
454 454  
455 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860403792-491.png?width=735&height=153&rev=1.1||alt="1652860403792-491.png"]]
446 +[[image:1652860403792-491.png||height="153" width="735"]]
456 456  
457 457  
458 458  === 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
... ... @@ -466,12 +466,12 @@
466 466  
467 467  (% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
468 468  
469 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-1.png?width=720&height=628&rev=1.1||alt="image-20221013153352-1.png"]]
460 +[[image:image-20221013153352-1.png||height="628" width="720"]]
470 470  
471 471  
472 472  (% style="color:blue" %)**Payload:**
473 473  
474 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-2.png?width=1215&height=167&rev=1.1||alt="image-20221013153352-2.png"]]
465 +[[image:image-20221013153352-2.png||height="167" width="1215"]]
475 475  
476 476  
477 477  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
... ... @@ -546,7 +546,7 @@
546 546  
547 547  
548 548  (((
549 -CPL03-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
540 +CPL01 stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
550 550  )))
551 551  
552 552  (((
... ... @@ -554,7 +554,7 @@
554 554  )))
555 555  
556 556  * (((
557 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL03-LB will send max bytes according to the current DR and Frequency bands.
548 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL01 will send max bytes according to the current DR and Frequency bands.
558 558  )))
559 559  
560 560  (((
... ... @@ -578,7 +578,7 @@
578 578  )))
579 579  
580 580  (((
581 -If CPL03-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
572 +If CPL01 doesn't have any data in the polling time. It will uplink 11 bytes of 0
582 582  
583 583  
584 584  )))
... ... @@ -590,7 +590,7 @@
590 590  **0x31 61 E9 3A D4 61 E9 3D E0 05**
591 591  )))
592 592  
593 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861353248-624.png?width=720&height=189&rev=1.1||alt="1652861353248-624.png"]]
584 +[[image:1652861353248-624.png||height="189" width="720"]]
594 594  
595 595  
596 596  (% style="color:blue" %)** Uplink:**
... ... @@ -654,7 +654,7 @@
654 654  
655 655  )))
656 656  
657 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861480446-216.png?rev=1.1||alt="1652861480446-216.png"]]
648 +[[image:1652861480446-216.png]]
658 658  
659 659  
660 660  == 2.4 Payload Decoder file ==
... ... @@ -668,19 +668,19 @@
668 668  == 2.5 Datalog Feature ==
669 669  
670 670  
671 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
662 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
672 672  
673 673  
674 674  === 2.5.1 Ways to get datalog via LoRaWAN ===
675 675  
676 676  
677 -Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
668 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
678 678  
679 679  * (((
680 -a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
671 +a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
681 681  )))
682 682  * (((
683 -b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
674 +b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
684 684  )))
685 685  
686 686  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -691,7 +691,7 @@
691 691  === 2.5.2 Unix TimeStamp ===
692 692  
693 693  
694 -CPL03-LB uses Unix TimeStamp format based on
685 +S31x-LB uses Unix TimeStamp format based on
695 695  
696 696  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
697 697  
... ... @@ -710,11 +710,12 @@
710 710  
711 711  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
712 712  
713 -Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
704 +Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
714 714  
715 715  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
716 716  
717 717  
709 +
718 718  === 2.5.4 Poll sensor value ===
719 719  
720 720  
... ... @@ -730,7 +730,7 @@
730 730  )))
731 731  
732 732  (((
733 -For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
725 +For example, downlink command[[image:image-20220518162852-1.png]]
734 734  )))
735 735  
736 736  (((
... ... @@ -738,7 +738,7 @@
738 738  )))
739 739  
740 740  (((
741 -Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
733 +Uplink Internal =5s，means CPL01 will send one packet every 5s. range 5~~255s.
742 742  )))
743 743  
744 744  
... ... @@ -745,17 +745,17 @@
745 745  == 2.7 Frequency Plans ==
746 746  
747 747  
748 -The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
740 +The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
749 749  
750 750  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
751 751  
752 752  
753 -= 3. Configure CPL03-LB =
745 += 3. Configure S31x-LB =
754 754  
755 755  == 3.1 Configure Methods ==
756 756  
757 757  
758 -CPL03-LB supports below configure method:
750 +S31x-LB supports below configure method:
759 759  
760 760  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
761 761  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -785,6 +785,8 @@
785 785  
786 786  (((
787 787  Feature: Change LoRaWAN End Node Transmit Interval.
780 +
781 +
788 788  )))
789 789  
790 790  (((
... ... @@ -825,6 +825,7 @@
825 825  
826 826  )))
827 827  
822 +
828 828  === 3.3.2 Quit AT Command ===
829 829  
830 830  
... ... @@ -869,59 +869,88 @@
869 869  
870 870  **0xA7 00    ** ~/~/  Same As AT+DISALARM=0
871 871  
867 +(% style="color:red" %)**Notice, This command requires setting CPL01 to LDS03A Mode first. See **(%%)**"(% style="color:blue" %)3.7 Set the sensor mode"(%%)**
872 872  
869 +
873 873  === 3.3.5 Alarm Base on Timeout ===
874 874  
875 875  
876 876  (((
877 -CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
874 +(((
875 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
876 +
877 +
878 878  )))
879 +)))
879 879  
880 -
881 881  (((
882 +(((
882 882  (% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
883 883  )))
885 +)))
884 884  
885 885  (((
886 -**Keep Status = 1**: Monitor Close to Open event
888 +(((
889 +Keep Status = 1: Monitor Close to Open event
887 887  )))
891 +)))
888 888  
889 889  (((
890 -**Keep Status = 0**: Monitor Open to Close event
894 +(((
895 +Keep Status = 0: Monitor Open to Close event
896 +
897 +
891 891  )))
899 +)))
892 892  
893 -
894 894  (((
902 +(((
895 895  (% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
896 896  )))
905 +)))
897 897  
898 898  (((
908 +(((
899 899  Range 0 ~~ 65535(0xFFFF) seconds.
900 900  )))
911 +)))
901 901  
902 902  (((
903 -If** keep time = 0**, Disable Alarm Base on Timeout feature.
914 +(((
915 +If keep time = 0, Disable Alarm Base on Timeout feature.
904 904  )))
917 +)))
905 905  
906 906  (((
907 -If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
920 +(((
921 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
908 908  )))
909 909  
924 +(((
925 +
926 +)))
927 +)))
910 910  
911 911  (((
930 +(((
912 912  (% style="color:#4f81bd" %)**AT Command**(%%) to configure:
913 913  )))
914 914  
915 915  (((
916 -(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
935 +(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
917 917  )))
918 918  
919 919  (((
920 920  (% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
921 921  )))
941 +)))
922 922  
943 +(((
944 +
945 +)))
923 923  
924 924  (((
948 +(((
925 925  (% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
926 926  )))
927 927  
... ... @@ -928,31 +928,47 @@
928 928  (((
929 929  **Command: 0xA9 aa bb cc**
930 930  )))
955 +)))
931 931  
932 932  (((
933 -**A9: **Command Type Code
958 +(((
959 +A9: Command Type Code
934 934  )))
961 +)))
935 935  
936 936  (((
937 -**aa: **status to be monitored
964 +(((
965 +aa: status to be monitored
938 938  )))
967 +)))
939 939  
940 940  (((
941 -**bb cc: **timeout.
970 +(((
971 +bb cc: timeout.
942 942  )))
973 +)))
943 943  
975 +(((
976 +
977 +)))
944 944  
945 945  (((
980 +(((
946 946  If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
947 947  )))
983 +)))
948 948  
949 949  (((
986 +(((
950 950  Or
951 951  )))
989 +)))
952 952  
953 953  (((
992 +(((
954 954  0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
955 955  )))
995 +)))
956 956  
957 957  
958 958  === 3.3.6 Clear Flash Record ===
... ... @@ -960,19 +960,22 @@
960 960  
961 961  Feature: Clear flash storage for data log feature.
962 962  
963 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
964 964  
1004 +(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1005 +
965 965  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
966 966  |=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
967 967  |(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
968 968  
969 969  (((
970 -(% style="color:blue" %)**Downlink Command:**
1011 +(((
1012 +(% style="color:#4f81bd" %)**Downlink Command:**
971 971  )))
972 972  
973 973  (((
974 974  * **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
975 975  )))
1018 +)))
976 976  
977 977  
978 978  
... ... @@ -981,7 +981,7 @@
981 981  
982 982  Feature: Set the trigger interrupt mode.
983 983  
984 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
1027 +(% style="color:#4f81bd" %)**AT Command: AT+TTRMOD**
985 985  
986 986  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
987 987  |=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
... ... @@ -998,16 +998,21 @@
998 998  OK
999 999  )))
1000 1000  
1001 -(% style="color:blue" %)**Downlink Command:**
1044 +(% style="color:#4f81bd" %)**Downlink Command:**
1002 1002  
1003 1003  * **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
1004 1004  
1048 +
1049 +
1050 +
1051 +
1052 +
1005 1005  === 3.3.8 Set the calculate flag ===
1006 1006  
1007 1007  
1008 1008  Feature: Set the calculate flag
1009 1009  
1010 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
1058 +(% style="color:#4f81bd" %)**AT Command: AT+CALCFLAG**
1011 1011  
1012 1012  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
1013 1013  |=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
... ... @@ -1014,16 +1014,19 @@
1014 1014  |(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
1015 1015  |(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
1016 1016  
1017 -(% style="color:blue" %)**Downlink Command:**
1065 +(% style="color:#4f81bd" %)**Downlink Command:**
1018 1018  
1019 1019  * **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
1020 1020  
1069 +
1070 +
1071 +
1021 1021  === 3.3.9 Set count number ===
1022 1022  
1023 1023  
1024 1024  Feature: Manually set the count number
1025 1025  
1026 -(% style="color:blue" %)**AT Command: AT+SETCNT**
1077 +(% style="color:#4f81bd" %)**AT Command: AT+SETCNT**
1027 1027  
1028 1028  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
1029 1029  |=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
... ... @@ -1030,12 +1030,14 @@
1030 1030  |(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
1031 1031  |(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
1032 1032  
1033 -(% style="color:blue" %)**Downlink Command:**
1084 +(% style="color:#4f81bd" %)**Downlink Command:**
1034 1034  
1035 1035  * **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
1036 -
1037 1037  * **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
1038 1038  
1089 +
1090 +
1091 +
1039 1039  === 3.3.10 Set Interrupt Mode ===
1040 1040  
1041 1041  
... ... @@ -1067,9 +1067,13 @@
1067 1067  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1068 1068  
1069 1069  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
1070 -
1071 1071  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1072 1072  
1125 +
1126 +
1127 +
1128 +
1129 +
1073 1073  === 3.3.11 Set Power Output Duration ===
1074 1074  
1075 1075  
... ... @@ -1096,13 +1096,12 @@
1096 1096  The first and second bytes are the time to turn on.
1097 1097  
1098 1098  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1099 -
1100 1100  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1101 1101  
1102 1102  = 4. Battery & Power Consumption =
1103 1103  
1104 1104  
1105 -CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1161 +S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1106 1106  
1107 1107  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1108 1108  
... ... @@ -1111,36 +1111,30 @@
1111 1111  
1112 1112  
1113 1113  (% class="wikigeneratedid" %)
1114 -User can change firmware CPL03-LB to:
1170 +User can change firmware S31x-LB to:
1115 1115  
1116 1116  * Change Frequency band/ region.
1117 -
1118 1118  * Update with new features.
1119 -
1120 1120  * Fix bugs.
1121 1121  
1122 1122  Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
1123 1123  
1178 +
1124 1124  Methods to Update Firmware:
1125 1125  
1126 1126  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
1127 -
1128 1128  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1129 1129  
1130 1130  = 6. FAQ =
1131 1131  
1132 -== 6.1  AT Commands input doesn't work ==
1133 1133  
1134 1134  
1135 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1136 -
1137 -
1138 1138  = 7. Order Info =
1139 1139  
1140 1140  
1141 -Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
1191 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
1142 1142  
1143 -(% style="color:red" %)**XXX**(%%): The default frequency band
1193 +(% style="color:red" %)**XX**(%%): The default frequency band
1144 1144  
1145 1145  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1146 1146  
... ... @@ -1163,7 +1163,7 @@
1163 1163  
1164 1164  (% style="color:#037691" %)**Package Includes**:
1165 1165  
1166 -* CPL03-LB LoRaWAN Pulse/Contact Sensor
1216 +* S31x-LB LoRaWAN Temperature & Humidity Sensor
1167 1167  
1168 1168  (% style="color:#037691" %)**Dimension and weight**:
1169 1169  
image-20230530111051-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.1 KB
Content
image-20230530111412-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
image-20230530135919-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.6 KB
Content
image-20230530135929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.6 KB
Content
image-20230530140053-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content