Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 67.1
edited by Xiaoling
on 2023/05/30 14:01
Change comment: Uploaded new attachment "image-20230530140053-1.jpeg", version {1}
To version 62.6
edited by Xiaoling
on 2023/05/30 10:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SW3L-LB -- LoRaWAN Flow Sensor User Manual
1 +CPL03-LB -- LoRaWAN Pulse/Contact Sensor User Manual
Content
... ... @@ -33,9 +33,6 @@
33 33  Each CPL03-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 34  
35 35  
36 -[[image:image-20230530135919-1.png||height="404" width="806"]]
37 -
38 -
39 39  == 1.2 ​Features ==
40 40  
41 41  
... ... @@ -53,7 +53,6 @@
53 53  * Downlink to change configure
54 54  * 8500mAh Battery for long term use
55 55  
56 -
57 57  == 1.3 Specification ==
58 58  
59 59  
... ... @@ -82,7 +82,6 @@
82 82  * Sleep Mode: 5uA @ 3.3v
83 83  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
84 84  
85 -
86 86  == 1.4 Applications ==
87 87  
88 88  
... ... @@ -90,7 +90,6 @@
90 90  * Pulse meter application
91 91  * Dry Contact Detection
92 92  
93 -
94 94  == 1.5 Sleep mode and working mode ==
95 95  
96 96  
... ... @@ -99,7 +99,7 @@
99 99  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
100 100  
101 101  
102 -== 1.6 Button & LEDs ==
96 +== 1.5 Button & LEDs ==
103 103  
104 104  
105 105  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -118,10 +118,9 @@
118 118  )))
119 119  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
120 120  
115 +== 1.6 BLE connection ==
121 121  
122 -== 1.7 BLE connection ==
123 123  
124 -
125 125  CPL03-LB support BLE remote configure.
126 126  
127 127  
... ... @@ -134,12 +134,12 @@
134 134  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
135 135  
136 136  
137 -== 1.8 Pin Definitions ==
130 +== 1.7 Pin Definitions ==
138 138  
139 139  [[image:image-20230523174230-1.png]]
140 140  
141 141  
142 -== 1.9 Mechanical ==
135 +== 1.8 Mechanical ==
143 143  
144 144  
145 145  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -158,7 +158,6 @@
158 158  
159 159  The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
160 160  
161 -(% style="display:none" %) (%%)
162 162  
163 163  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
164 164  
... ... @@ -167,9 +167,7 @@
167 167  
168 168  The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
169 169  
170 -[[image:image-20230530135929-2.png||height="404" width="806"]](% style="display:none" %)
171 171  
172 -
173 173  (% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
174 174  
175 175  Each CPL03-LB is shipped with a sticker with the default device EUI as below:
... ... @@ -287,7 +287,7 @@
287 287  === 2.3.2 Sensor Configuration, FPORT~=4 ===
288 288  
289 289  
290 -CPL03-LB will only send this command after getting the downlink command (0x26 02) from the server.
280 +CPL01 will only send this command after getting the downlink command (0x26 02) from the server.
291 291  
292 292  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
293 293  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
... ... @@ -309,11 +309,11 @@
309 309  )))
310 310  
311 311  (((
312 -(% style="color:blue" %)** If Disalarm = 1**(%%), CPL03-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
302 +(% style="color:blue" %)** If Disalarm = 1**(%%), CPL01 will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
313 313  )))
314 314  
315 315  (((
316 -(% style="color:blue" %)** If Disalarm = 0**(%%), CPL03-LB will send uplink at every TDC periodically.
306 +(% style="color:blue" %)** If Disalarm = 0**(%%), CPL01 will send uplink at every TDC periodically.
317 317  
318 318  
319 319  )))
... ... @@ -323,7 +323,7 @@
323 323  )))
324 324  
325 325  (((
326 -Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.5AlarmBaseonTimeout"]]
316 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.5AlarmBaseonTimeout"]]
327 327  
328 328  
329 329  )))
... ... @@ -340,10 +340,10 @@
340 340  (% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
341 341  )))
342 342  
343 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860064987-743.png?width=730&height=152&rev=1.1||alt="1652860064987-743.png"]]
333 +[[image:1652860064987-743.png||height="152" width="730"]]
344 344  
345 345  
346 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860079526-831.png?width=729&height=209&rev=1.1||alt="1652860079526-831.png"]]
336 +[[image:1652860079526-831.png||height="209" width="729"]]
347 347  
348 348  
349 349  === 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
... ... @@ -351,13 +351,13 @@
351 351  
352 352  (((
353 353  (((
354 -CPL03-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL03-LB will:
344 +CPL01 will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL01 will:
355 355  )))
356 356  )))
357 357  
358 358  (((
359 359  (((
360 -periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
350 +periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].
361 361  )))
362 362  )))
363 363  
... ... @@ -370,7 +370,7 @@
370 370  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
371 371  |=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
372 372  |(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
373 -|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
363 +|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]
374 374  
375 375  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
376 376  |=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
... ... @@ -398,7 +398,7 @@
398 398  )))
399 399  
400 400  (((
401 -Refer: [[Set Calculate Flag>>||anchor="H3.3.8Setthecalculateflag"]]
391 +Refer: [[Set Calculate Flag>>||anchor="H3.9Setthecalculateflag"]]
402 402  
403 403  
404 404  )))
... ... @@ -408,7 +408,7 @@
408 408  )))
409 409  
410 410  (((
411 -See [[Alarm Base on Timeout>>||anchor="H3.3.5AlarmBaseonTimeout"]]
401 +See [[Alarm Base on Timeout>>||anchor="H3.5AlarmBaseonTimeout"]]
412 412  
413 413  
414 414  )))
... ... @@ -453,7 +453,7 @@
453 453  Unit: min.
454 454  )))
455 455  
456 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860403792-491.png?width=735&height=153&rev=1.1||alt="1652860403792-491.png"]]
446 +[[image:1652860403792-491.png||height="153" width="735"]]
457 457  
458 458  
459 459  === 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
... ... @@ -467,12 +467,12 @@
467 467  
468 468  (% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
469 469  
470 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-1.png?width=720&height=628&rev=1.1||alt="image-20221013153352-1.png"]]
460 +[[image:image-20221013153352-1.png||height="628" width="720"]]
471 471  
472 472  
473 473  (% style="color:blue" %)**Payload:**
474 474  
475 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-2.png?width=1215&height=167&rev=1.1||alt="image-20221013153352-2.png"]]
465 +[[image:image-20221013153352-2.png||height="167" width="1215"]]
476 476  
477 477  
478 478  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
... ... @@ -547,7 +547,7 @@
547 547  
548 548  
549 549  (((
550 -CPL03-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
540 +CPL01 stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
551 551  )))
552 552  
553 553  (((
... ... @@ -555,7 +555,7 @@
555 555  )))
556 556  
557 557  * (((
558 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL03-LB will send max bytes according to the current DR and Frequency bands.
548 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL01 will send max bytes according to the current DR and Frequency bands.
559 559  )))
560 560  
561 561  (((
... ... @@ -579,7 +579,7 @@
579 579  )))
580 580  
581 581  (((
582 -If CPL03-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
572 +If CPL01 doesn't have any data in the polling time. It will uplink 11 bytes of 0
583 583  
584 584  
585 585  )))
... ... @@ -591,7 +591,7 @@
591 591  **0x31 61 E9 3A D4 61 E9 3D E0 05**
592 592  )))
593 593  
594 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861353248-624.png?width=720&height=189&rev=1.1||alt="1652861353248-624.png"]]
584 +[[image:1652861353248-624.png||height="189" width="720"]]
595 595  
596 596  
597 597  (% style="color:blue" %)** Uplink:**
... ... @@ -655,7 +655,7 @@
655 655  
656 656  )))
657 657  
658 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861480446-216.png?rev=1.1||alt="1652861480446-216.png"]]
648 +[[image:1652861480446-216.png]]
659 659  
660 660  
661 661  == 2.4 Payload Decoder file ==
... ... @@ -669,19 +669,19 @@
669 669  == 2.5 Datalog Feature ==
670 670  
671 671  
672 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
662 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
673 673  
674 674  
675 675  === 2.5.1 Ways to get datalog via LoRaWAN ===
676 676  
677 677  
678 -Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
668 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
679 679  
680 680  * (((
681 -a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
671 +a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
682 682  )))
683 683  * (((
684 -b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
674 +b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
685 685  )))
686 686  
687 687  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -692,7 +692,7 @@
692 692  === 2.5.2 Unix TimeStamp ===
693 693  
694 694  
695 -CPL03-LB uses Unix TimeStamp format based on
685 +S31x-LB uses Unix TimeStamp format based on
696 696  
697 697  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
698 698  
... ... @@ -711,11 +711,12 @@
711 711  
712 712  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
713 713  
714 -Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
704 +Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
715 715  
716 716  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
717 717  
718 718  
709 +
719 719  === 2.5.4 Poll sensor value ===
720 720  
721 721  
... ... @@ -731,7 +731,7 @@
731 731  )))
732 732  
733 733  (((
734 -For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
725 +For example, downlink command[[image:image-20220518162852-1.png]]
735 735  )))
736 736  
737 737  (((
... ... @@ -739,7 +739,7 @@
739 739  )))
740 740  
741 741  (((
742 -Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
733 +Uplink Internal =5s，means CPL01 will send one packet every 5s. range 5~~255s.
743 743  )))
744 744  
745 745  
... ... @@ -746,23 +746,22 @@
746 746  == 2.7 Frequency Plans ==
747 747  
748 748  
749 -The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
740 +The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
750 750  
751 751  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
752 752  
753 753  
754 -= 3. Configure CPL03-LB =
745 += 3. Configure S31x-LB =
755 755  
756 756  == 3.1 Configure Methods ==
757 757  
758 758  
759 -CPL03-LB supports below configure method:
750 +S31x-LB supports below configure method:
760 760  
761 761  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
762 762  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
763 763  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
764 764  
765 -
766 766  == 3.2 General Commands ==
767 767  
768 768  
... ... @@ -787,6 +787,8 @@
787 787  
788 788  (((
789 789  Feature: Change LoRaWAN End Node Transmit Interval.
780 +
781 +
790 790  )))
791 791  
792 792  (((
... ... @@ -827,6 +827,7 @@
827 827  
828 828  )))
829 829  
822 +
830 830  === 3.3.2 Quit AT Command ===
831 831  
832 832  
... ... @@ -871,59 +871,88 @@
871 871  
872 872  **0xA7 00    ** ~/~/  Same As AT+DISALARM=0
873 873  
867 +(% style="color:red" %)**Notice, This command requires setting CPL01 to LDS03A Mode first. See **(%%)**"(% style="color:blue" %)3.7 Set the sensor mode"(%%)**
874 874  
869 +
875 875  === 3.3.5 Alarm Base on Timeout ===
876 876  
877 877  
878 878  (((
879 -CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
874 +(((
875 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
876 +
877 +
880 880  )))
879 +)))
881 881  
882 -
883 883  (((
882 +(((
884 884  (% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
885 885  )))
885 +)))
886 886  
887 887  (((
888 -**Keep Status = 1**: Monitor Close to Open event
888 +(((
889 +Keep Status = 1: Monitor Close to Open event
889 889  )))
891 +)))
890 890  
891 891  (((
892 -**Keep Status = 0**: Monitor Open to Close event
894 +(((
895 +Keep Status = 0: Monitor Open to Close event
896 +
897 +
893 893  )))
899 +)))
894 894  
895 -
896 896  (((
902 +(((
897 897  (% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
898 898  )))
905 +)))
899 899  
900 900  (((
908 +(((
901 901  Range 0 ~~ 65535(0xFFFF) seconds.
902 902  )))
911 +)))
903 903  
904 904  (((
905 -If** keep time = 0**, Disable Alarm Base on Timeout feature.
914 +(((
915 +If keep time = 0, Disable Alarm Base on Timeout feature.
906 906  )))
917 +)))
907 907  
908 908  (((
909 -If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
920 +(((
921 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
910 910  )))
911 911  
924 +(((
925 +
926 +)))
927 +)))
912 912  
913 913  (((
930 +(((
914 914  (% style="color:#4f81bd" %)**AT Command**(%%) to configure:
915 915  )))
916 916  
917 917  (((
918 -(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
935 +(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
919 919  )))
920 920  
921 921  (((
922 922  (% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
923 923  )))
941 +)))
924 924  
943 +(((
944 +
945 +)))
925 925  
926 926  (((
948 +(((
927 927  (% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
928 928  )))
929 929  
... ... @@ -930,31 +930,47 @@
930 930  (((
931 931  **Command: 0xA9 aa bb cc**
932 932  )))
955 +)))
933 933  
934 934  (((
935 -**A9: **Command Type Code
958 +(((
959 +A9: Command Type Code
936 936  )))
961 +)))
937 937  
938 938  (((
939 -**aa: **status to be monitored
964 +(((
965 +aa: status to be monitored
940 940  )))
967 +)))
941 941  
942 942  (((
943 -**bb cc: **timeout.
970 +(((
971 +bb cc: timeout.
944 944  )))
973 +)))
945 945  
975 +(((
976 +
977 +)))
946 946  
947 947  (((
980 +(((
948 948  If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
949 949  )))
983 +)))
950 950  
951 951  (((
986 +(((
952 952  Or
953 953  )))
989 +)))
954 954  
955 955  (((
992 +(((
956 956  0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
957 957  )))
995 +)))
958 958  
959 959  
960 960  === 3.3.6 Clear Flash Record ===
... ... @@ -962,19 +962,22 @@
962 962  
963 963  Feature: Clear flash storage for data log feature.
964 964  
965 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
966 966  
1004 +(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1005 +
967 967  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
968 968  |=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
969 969  |(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
970 970  
971 971  (((
972 -(% style="color:blue" %)**Downlink Command:**
1011 +(((
1012 +(% style="color:#4f81bd" %)**Downlink Command:**
973 973  )))
974 974  
975 975  (((
976 976  * **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
977 977  )))
1018 +)))
978 978  
979 979  
980 980  
... ... @@ -1005,6 +1005,10 @@
1005 1005  * **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
1006 1006  
1007 1007  
1049 +
1050 +
1051 +
1052 +
1008 1008  === 3.3.8 Set the calculate flag ===
1009 1009  
1010 1010  
... ... @@ -1022,6 +1022,8 @@
1022 1022  * **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
1023 1023  
1024 1024  
1070 +
1071 +
1025 1025  === 3.3.9 Set count number ===
1026 1026  
1027 1027  
... ... @@ -1041,6 +1041,8 @@
1041 1041  * **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
1042 1042  
1043 1043  
1091 +
1092 +
1044 1044  === 3.3.10 Set Interrupt Mode ===
1045 1045  
1046 1046  
... ... @@ -1076,6 +1076,10 @@
1076 1076  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1077 1077  
1078 1078  
1128 +
1129 +
1130 +
1131 +
1079 1079  === 3.3.11 Set Power Output Duration ===
1080 1080  
1081 1081  
... ... @@ -1102,14 +1102,12 @@
1102 1102  The first and second bytes are the time to turn on.
1103 1103  
1104 1104  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1105 -
1106 1106  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1107 1107  
1108 -
1109 1109  = 4. Battery & Power Consumption =
1110 1110  
1111 1111  
1112 -CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1163 +S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1113 1113  
1114 1114  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1115 1115  
... ... @@ -1118,37 +1118,30 @@
1118 1118  
1119 1119  
1120 1120  (% class="wikigeneratedid" %)
1121 -User can change firmware CPL03-LB to:
1172 +User can change firmware S31x-LB to:
1122 1122  
1123 1123  * Change Frequency band/ region.
1124 -
1125 1125  * Update with new features.
1126 -
1127 1127  * Fix bugs.
1128 1128  
1129 1129  Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
1130 1130  
1180 +
1131 1131  Methods to Update Firmware:
1132 1132  
1133 1133  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
1134 -
1135 1135  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1136 1136  
1137 -
1138 1138  = 6. FAQ =
1139 1139  
1140 -== 6.1  AT Commands input doesn't work ==
1141 1141  
1142 1142  
1143 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1144 -
1145 -
1146 1146  = 7. Order Info =
1147 1147  
1148 1148  
1149 -Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
1193 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
1150 1150  
1151 -(% style="color:red" %)**XXX**(%%): The default frequency band
1195 +(% style="color:red" %)**XX**(%%): The default frequency band
1152 1152  
1153 1153  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1154 1154  
... ... @@ -1166,13 +1166,12 @@
1166 1166  
1167 1167  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1168 1168  
1169 -
1170 1170  = 8. ​Packing Info =
1171 1171  
1172 1172  
1173 1173  (% style="color:#037691" %)**Package Includes**:
1174 1174  
1175 -* CPL03-LB LoRaWAN Pulse/Contact Sensor
1218 +* S31x-LB LoRaWAN Temperature & Humidity Sensor
1176 1176  
1177 1177  (% style="color:#037691" %)**Dimension and weight**:
1178 1178  
... ... @@ -1184,7 +1184,6 @@
1184 1184  
1185 1185  * Weight / pcs : g
1186 1186  
1187 -
1188 1188  = 9. Support =
1189 1189  
1190 1190  
image-20230530111051-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.1 KB
Content
image-20230530111412-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
image-20230530135919-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.6 KB
Content
image-20230530135929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.6 KB
Content
image-20230530140053-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content