Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Last modified by Mengting Qiu on 2023/12/14 11:15

From 62.3 to 62.2 From 66.1 to 65.1

From version 65.1

edited by Xiaoling
on 2023/05/30 13:59

Change comment: Uploaded new attachment "image-20230530135919-1.png", version {1}

To version 62.3

edited by Xiaoling
on 2023/05/30 09:08

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 3 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual
++CPL03-LB -- LoRaWAN Pulse/Contact Sensor User Manual

Content

@@ -20,12 +20,12 @@
  The CPL03-LB will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
++The temperature & humidity sensor used in CPL03-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
++
  The LoRa wireless technology used in CPL03-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
--CPL03-LB (% style="color:blue" %)**supports open alarm feature**(%%), user can set open alarm for instant notice. CPL03-LB (% style="color:blue" %)**supports Datalog feature**(%%), it can save the data when there is no LoRaWAN network and uplink when network recover.
++CPL03-LB (% style="color:blue" %)**supports open alarm feature**(%%), user can set open alarm for instant notice. CPL03-LB (% style="color:blue" %)**supports Datalog feature**, it can save the data when there is no LoRaWAN network and uplink when network recover.
--CPL03-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
--
  CPL03-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
  CPL03-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
@@ -33,28 +33,22 @@
  Each CPL03-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
--[[image:image-20230530111051-3.png||height="402" width="850"]]
--
--
  == 1.2 Features ==
  * LoRaWAN 1.0.3 Class A
--* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
  * Ultra-low power consumption
--* Open/Close detect
--* Open/Close statistics
++* External 3 meters SHT31 probe (For S31-LB)
++* Measure range -55°C ~~ 125°C
  * Temperature & Humidity alarm
--* supports open alarm feature
--* supports Datalog feature
++* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
  * Support Bluetooth v5.1 and LoRaWAN remote configure
  * Support wireless OTA update firmware
--* Uplink on periodically and open/close event
++* Uplink on periodically
  * Downlink to change configure
  * 8500mAh Battery for long term use
--
  == 1.3 Specification ==
@@ -63,6 +63,20 @@
  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
  * Operating Temperature: -40 ~~ 85°C
++(% style="color:#037691" %)**Temperature Sensor:**
++
++* Range: -40 to + 80°C
++* Accuracy: ±0.2 @ 0-90 °C
++* Resolution: 0.1°C
++* Long Term Shift: <0.03 °C/yr
++
++(% style="color:#037691" %)**Humidity Sensor: **
++
++* Range: 0 ~~ 99.9% RH
++* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
++* Resolution: 0.01% RH
++* Long Term Shift: <0.25 %RH/yr
++
  (% style="color:#037691" %)**LoRa Spec:**
  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
@@ -84,25 +84,15 @@
  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
++== 1.4 Sleep mode and working mode ==
--== 1.4 Applications ==
--
--* Open/Close Detection
--* Pulse meter application
--* Dry Contact Detection
--
--
--
--== 1.5 Sleep mode and working mode ==
--
--
  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
--== 1.6 Button & LEDs ==
++== 1.5 Button & LEDs ==
  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
@@ -122,13 +122,12 @@
  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
++== 1.6 BLE connection ==
--== 1.7 BLE connection ==
++S31x-LB support BLE remote configure.
--CPL03-LB support BLE remote configure.
--
  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
  * Press button to send an uplink
@@ -138,11 +138,37 @@
  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
--== 1.8 Pin Definitions ==
++== 1.7 Pin Definitions ==
  [[image:image-20230523174230-1.png]]
++== 1.8 Hardware Variant ==
++
++
++(% border="1" cellspacing="5" style="width:472px" %)
++|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 187px; background-color:#D9E2F3;color:#0070C0" %)Probe Info
++|(% style="width:102px" %)(((
++S31-LB
++)))|(% style="width:190px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:187px" %)(((
++1 x SHT31 Probe
++
++Cable Length : 2 meters
++
++
++)))
++|(% style="width:102px" %)(((
++S31B-LB
++)))|(% style="width:190px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:187px" %)(((
++1 x SHT31 Probe
++
++Installed in device.
++)))
++
++(% style="display:none" %)
++
++
++
  == 1.9 Mechanical ==
@@ -155,14 +155,13 @@
  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
--= 2. Configure CPL03-LB to connect to LoRaWAN network =
++= 2. Configure S31x-LB to connect to LoRaWAN network =
  == 2.1 How it works ==
--The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
++The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
--(% style="display:none" %) (%%)
  == 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
@@ -169,15 +169,13 @@
  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]]  as a LoRaWAN gateway in this example.
--The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
++The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
--[[image:image-20230530111412-4.png||height="398" width="805"]](% style="display:none" %)
++(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
--(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
++Each S31x-LB is shipped with a sticker with the default device EUI as below:
--Each CPL03-LB is shipped with a sticker with the default device EUI as below:
--
  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
@@ -205,10 +205,10 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
--(% style="color:blue" %)**Step 2:**(%%) Activate on CPL03-LB
++(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
--Press the button for 5 seconds to activate the CPL03-LB.
++Press the button for 5 seconds to activate the S31x-LB.
  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
@@ -220,7 +220,7 @@
  === 2.3.1 Device Status, FPORT~=5 ===
--Users can use the downlink command(**0x26 01**) to ask CPL03-LB to send device configure detail, include device configure status. CPL03-LB will uplink a payload via FPort=5 to server.
++Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
  The Payload format is as below.
@@ -232,10 +232,10 @@
  Example parse in TTNv3
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652859749264-179.png?width=723&height=275&rev=1.1||alt="1652859749264-179.png"]]
++[[image:image-20230524144422-1.png||height="174" width="1080"]]
--(% style="color:#037691" %)**Sensor Model**(%%): For CPL03-LB, this value is 0x0A
++(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
@@ -288,479 +288,260 @@
  Ex2: 0x0B49 = 2889mV
--=== 2.3.2 Sensor Configuration, FPORT~=4 ===
++=== 2.3.2  Sensor Data. FPORT~=2 ===
--CPL03-LB will only send this command after getting the downlink command (0x26 02) from the server.
++Sensor Data is uplink via FPORT=2
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
--|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**|(% style="width:158px" %)**1**
--|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: sec)|(% style="width:158px" %)Trigger mode
--
--* (((
--(% style="color:#037691" %)** TDC: (default: 0x001C20)**
++(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
++|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
++**Size(bytes)**
++)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
++|(% style="width:99px" %)Value|(% style="width:69px" %)(((
++Battery
++)))|(% style="width:130px" %)(((
++Unix TimeStamp
++)))|(% style="width:194px" %)(((
++Alarm Flag & MOD& Level of PA8
++)))|(% style="width:106px" %)(((
++Temperature
++)))|(% style="width:97px" %)(((
++Humidity
  )))
--(((
--Uplink interval for the total pulse count, default value is 0x001C20 which is 7200 seconds = 2 hours.
++[[image:image-20230524144456-2.png||height="180" width="1142"]]
--
--)))
--* (((
--(% style="color:#037691" %)** Disalarm: (default: 0)**
--)))
++==== (% style="color:#4472c4" %)**Battery**(%%) ====
--(((
--(% style="color:blue" %)** If Disalarm = 1**(%%), CPL03-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
--)))
++Sensor Battery Level.
--(((
--(% style="color:blue" %)** If Disalarm = 0**(%%), CPL03-LB will send uplink at every TDC periodically.
++Ex1: 0x0B45 = 2885mV
--
--)))
++Ex2: 0x0B49 = 2889mV
--* (((
--(% style="color:#037691" %)** Keep Status & Keep Time**
--)))
--(((
--Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.5AlarmBaseonTimeout"]]
--
--)))
++==== (% style="color:#4472c4" %)**Temperature**(%%) ====
--* (((
--(% style="color:#037691" %)** Trigger mode (default: 0)**
--)))
++**Example**:
--(((
--(% style="color:blue" %)** If Trigger mode = 0**(%%), count close to open event.
--)))
++If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
--(((
--(% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
--)))
++If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860064987-743.png?width=730&height=152&rev=1.1||alt="1652860064987-743.png"]]
++（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860079526-831.png?width=729&height=209&rev=1.1||alt="1652860079526-831.png"]]
++==== (% style="color:#4472c4" %)**Humidity**(%%) ====
--=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
++Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
--(((
--(((
--CPL03-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL03-LB will:
--)))
--)))
++==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
--(((
--(((
--periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
--)))
--)))
--(((
--(((
--Uplink Payload totals 11 bytes.
--)))
--)))
++**Example:**
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
--|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
--|(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
--|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
++If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
--|=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
--|(% style="width:60px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:228px" %)**1**|(% style="width:146px" %)**1**
--|(% style="width:76px" %)Value|(% style="width:80px" %)Calculate Flag|(% style="width:208px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:136px" %)Contact Status: 0: Open, 1: Close
++If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
--* (((
--(% style="color:#037691" %)** Calculate Flag**
--)))
++If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
--(((
--The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
--)))
++If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
--(((
--User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
--)))
++If payload >> 2 = 0x00     **~-~->**  means MOD=1, This is a sampling uplink message.
--(((
--Default value: 0.
--)))
++If payload >> 2 = 0x31     **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
--(((
--Range (6 bits): (b)000000 ~~ (b) 111111
--)))
--(((
--Refer: [[Set Calculate Flag>>||anchor="H3.3.8Setthecalculateflag"]]
++== 2.4 Payload Decoder file ==
--
--)))
--* (((
--(% style="color:#037691" %)** Alarm**
--)))
++In TTN, use can add a custom payload so it shows friendly reading
--(((
--See [[Alarm Base on Timeout>>||anchor="H3.3.5AlarmBaseonTimeout"]]
++In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
--
--)))
++[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
--* (((
--(% style="color:#037691" %)** Contact Status**
--)))
--(((
--0: Open
--)))
++== 2.5 Datalog Feature ==
--(((
--1: Close
--
--)))
++Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
--* (((
--(% style="color:#037691" %)** Total pulse**
--)))
--(((
--Total pulse/counting base on dry [[contact trigger event>>||anchor="H2.3.2SensorConfiguration2CFPORT3D4"]]
--)))
++=== 2.5.1 Ways to get datalog via LoRaWAN ===
--(((
--Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
--
--)))
++Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
  * (((
--(% style="color:#037691" %)** The last open duration**
++a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
  )))
--
--(((
--Dry Contact last open duration.
++* (((
++b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
  )))
--(((
--Unit: min.
--)))
++Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860403792-491.png?width=735&height=153&rev=1.1||alt="1652860403792-491.png"]]
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
--=== 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
++=== 2.5.2 Unix TimeStamp ===
--(% style="color:red" %)**Note:**
++S31x-LB uses Unix TimeStamp format based on
--* Firmware support for this mode is not released. If users want to test, please contact Dragino support.
--* Users need to run (% style="color:blue" %)**AT+MOD=3**(%%) to support this model after updating the firmware.
--* This mode doesn't support Historical Events and Datalog features.
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
--(% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
++User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-1.png?width=720&height=628&rev=1.1||alt="image-20221013153352-1.png"]]
++Below is the converter example
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
--(% style="color:blue" %)**Payload:**
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-2.png?width=1215&height=167&rev=1.1||alt="image-20221013153352-2.png"]]
++So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
--|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:61px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**3**
--|(% style="width:93px" %)Value|(% style="width:59px" %)Status|(% style="width:98px" %)(((
--Port1 Total Pulse(PB14)
--)))|(% style="width:96px" %)(((
--Port2 Total Pulse(PB15)
--)))|(% style="width:94px" %)(((
--Port3 Total Pulse(PA4)
--)))
++=== 2.5.3 Set Device Time ===
--(% style="color:blue" %)**Status:**
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:257px" %)
--|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**6**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**
--|(% style="width:75px" %)Value|(% style="width:111px" %)Calculate Flag|(% style="width:68px" %)Reserve
++User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
--(% style="color:red" %)**Max COUNT for each port is 16777215. Exceed this number will reset to 1.**
++Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
++(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
--(% style="color:blue" %)**Related AT Command:**
--(% style="color:#037691" %)**AT+TTRMOD1:  Port1 count mode;   0: Signal falling edge(Default), 1: Signal raising edge**
++=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
--             AT+TTRMOD1=0  Downlink Command: 0xA4 01 00
--             AT+TTRMOD1=1  Downlink Command: 0xA4 01 01
++The Datalog uplinks will use below payload format.
++**Retrieval data payload:**
--(% style="color:#037691" %)**AT+TTRMOD2:  Port2 count mode;   0: Signal falling edge(Default), 1: Signal raising edge**
--
--             AT+TTRMOD1=0  Downlink Command: 0xA4 02 00
--
--             AT+TTRMOD1=1  Downlink Command: 0xA4 02 01
--
--
--(% style="color:#037691" %)**AT+TTRMOD3:  Port3 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
--
--             AT+TTRMOD1=0  Downlink Command: 0xA4 03 00
--
--             AT+TTRMOD1=1  Downlink Command: 0xA4 03 01
--
--
--(% style="color:#037691" %)**AT+CALCFLAG:  Calculate Flag ( Default : 0 )**
--
--             AT+CALCFLAG=aa
--
--
--(% style="color:blue" %)**Downlink Command: 0xA5 aa**
--
--(% style="color:#037691" %)**AT+COUNTMOD:  Accumulative Mode;  0: Accumulative (Default),1: Reset after uplink.**
--
--            AT+COUNTMOD=0   Downlink Command: 0x0B 00
--
--            AT+COUNTMOD=1   Downlink Command: 0x0B 01
--
--
--(% style="color:#037691" %)**AT+SETCNT:  Set count value**
--
--            AT+SETCNT=1,aa  Downlink Command: 0xA6 01 aa aa aa
--
--            AT+SETCNT=2,aa  Downlink Command: 0xA6 02 aa aa aa
--
--            AT+SETCNT=3,aa  Downlink Command: 0xA6 03 aa aa aa
--
--
--(% style="color:blue" %)**Decode:  **(%%)[[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
--
--
--=== 2.3.5 Historical Door Open/Close Event, FPORT~=3 ===
--
--
++(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
++|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
++**Size(bytes)**
++)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
++|(% style="width:103px" %)Value|(% style="width:68px" %)(((
++ignore
++)))|(% style="width:104px" %)(((
  (((
--CPL03-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
++Humidity
  )))
  (((
--The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
++
  )))
++)))|(% style="width:87px" %)(((
++Temperature
++)))|(% style="width:178px" %)(((
++Poll message flag & Alarm Flag& Level of PA8
++)))|(% style="width:137px" %)Unix Time Stamp
--* (((
--Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL03-LB will send max bytes according to the current DR and Frequency bands.
--)))
++**Poll message flag & Alarm Flag & Level of PA8:**
--(((
--For example, in the US915 band, the max payload for different DR is:
--)))
++[[image:image-20230524114302-1.png||height="115" width="736"]]
--(((
--a) (% style="color:blue" %)**DR0**(%%): max is 11 bytes so one entry of data
--)))
--(((
--b) (% style="color:blue" %)**DR1**(%%): max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
--)))
++**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
--(((
--c) (% style="color:blue" %)**DR2**(%%): total payload includes 11 entries of data
--)))
++**Poll Message Flag**: 1: This message is a poll message reply.
--(((
--d) (% style="color:blue" %)**DR3**(%%): total payload includes 22 entries of data.
--)))
++* Poll Message Flag is set to 1.
--(((
--If CPL03-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
++* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
--
--)))
++For example, in US915 band, the max payload for different DR is:
--(% style="color:blue" %)** Downlink:**
++**a) DR0:** max is 11 bytes so one entry of data
--(% class="box" %)
--(((
--**0x31 61 E9 3A D4 61 E9 3D E0 05**
--)))
++**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861353248-624.png?width=720&height=189&rev=1.1||alt="1652861353248-624.png"]]
++**c) DR2:** total payload includes 11 entries of data
++**d) DR3: **total payload includes 22 entries of data.
--(% style="color:blue" %)** Uplink:**
++If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
--(% class="box" %)
--(((
--**0E 00 23 E6 00 00 00 61 E9 3B 04 0E 00 23 E6 00 00 00 61 E9 3B 25 0D 00 00 00 00 00 00 61 E9 3B C8 0E 00 00 02 00 00 00 61 E9 3B D4 0E 00 00 06 00 00 00 61 E9 3B DB 01 00 00 00 00 00 00 61 E9 3C 91 01 00 00 00 00 00 00 61 E9 3C A1 0D 00 00 00 00 00 00 61 E9 3C BC 0E 00 00 07 00 00 00 61 E9 3C D6 00 00 00 00 00 00 00 61 E9 3D A6**
--)))
++**Example:**
--(% style="color:#037691" %)** **
++If S31x-LB has below data inside Flash:
--(% style="color:#037691" %)**Parsed Value:**
++[[image:image-20230524114654-2.png]]
--(((
--[ALARM, PIN_STATUS, TOTAL_PULSE, CALCULATE_FLAG, LAST_OPEN_DURATION, TIME]
--)))
--(((
--
--)))
++If user sends below downlink command:  31646D84E1646D856C05
--(((
--[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:35:48],
--)))
++Where : Start time: 646D84E1 = time 23/5/24 03:30:41
--(((
--[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:36:21],
--)))
++             Stop time: 646D856C= time 23/5/24 03:33:00
--(((
--[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:39:04],
--)))
++**S31x-LB will uplink this payload.**
++
++[[image:image-20230524114826-3.png||height="448" width="1244"]]
++
  (((
--[TRUE, CLOSE, 2, 3, 0, 2022-01-20 10:39:16],
++00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
  )))
  (((
--[TRUE, CLOSE, 6, 3, 0, 2022-01-20 10:39:23],
++Where the first 11 bytes is for the first entry:
  )))
  (((
--[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:25],
++00 00 02 36 01 10 40 64 6D 84 E1
  )))
  (((
--[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:41],
++**Hum**=0x0236/10=56.6
  )))
  (((
--[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:43:08],
++**Temp**=0x0110/10=27.2
  )))
  (((
--[TRUE, CLOSE, 7, 3, 0, 2022-01-20 10:43:34],
++**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
  )))
  (((
--[FALSE, CLOSE, 0, 0, 0, 2022-01-20 10:47:02],
--
--
++**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
  )))
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861480446-216.png?rev=1.1||alt="1652861480446-216.png"]]
++(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
--== 2.4 Payload Decoder file ==
++== 2.6 Temperature Alarm Feature ==
--In TTN, use can add a custom payload so it shows friendly reading
++S31x-LB work flow with Alarm feature.
--In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
++[[image:image-20230524110125-3.png||height="768" width="1115"]]
--== 2.5 Datalog Feature ==
--Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
--
--
--=== 2.5.1 Ways to get datalog via LoRaWAN ===
--
--
--Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
--
--* (((
--a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
--)))
--* (((
--b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
--)))
--
--Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
--
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
--
--
--=== 2.5.2 Unix TimeStamp ===
--
--
--CPL03-LB uses Unix TimeStamp format based on
--
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
--
--User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
--
--Below is the converter example
--
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
--
--
--So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
--
--
--=== 2.5.3 Set Device Time ===
--
--
--User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
--
--Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
--
--(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
--
--
--=== 2.5.4 Poll sensor value ===
--
--
--Users can poll sensor values based on timestamps. Below is the downlink command.
--
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
--|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
--|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
--|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
--
--(((
--Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
--)))
--
--(((
--For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
--)))
--
--(((
--Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
--)))
--
--(((
--Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
--)))
--
--
  == 2.7 Frequency Plans ==
--The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
++The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
--= 3. Configure CPL03-LB =
++= 3. Configure S31x-LB =
  == 3.1 Configure Methods ==
--CPL03-LB supports below configure method:
++S31x-LB supports below configure method:
  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
@@ -767,7 +767,6 @@
  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
--
  == 3.2 General Commands ==
@@ -781,25 +781,21 @@
  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
--== 3.3 Commands special design for CPL03-LB ==
++== 3.3 Commands special design for S31x-LB ==
--These commands only valid for CPL03-LB, as below:
++These commands only valid for S31x-LB, as below:
  === 3.3.1 Set Transmit Interval Time ===
--(((
  Feature: Change LoRaWAN End Node Transmit Interval.
--)))
--(((
  (% style="color:blue" %)**AT Command: AT+TDC**
--)))
  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
++|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
  OK
@@ -810,47 +810,19 @@
  Set transmit interval to 60000ms = 60 seconds
  )))
--(((
  (% style="color:blue" %)**Downlink Command: 0x01**
--)))
--(((
  Format: Command Code (0x01) followed by 3 bytes time value.
--)))
--(((
  If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
--)))
--* (((
--Example 1: Downlink Payload: 0100001E       ~/~/ Set Transmit Interval (TDC) = 30 seconds
--)))
--* (((
--Example 2: Downlink Payload: 0100003C      ~/~/ Set Transmit Interval (TDC) = 60 seconds
++* Example 1: Downlink Payload: 0100001E       ~/~/  Set Transmit Interval (TDC) = 30 seconds
++* Example 2: Downlink Payload: 0100003C       ~/~/  Set Transmit Interval (TDC) = 60 seconds
--
--)))
++=== 3.3.2 Get Device Status ===
--=== 3.3.2 Quit AT Command ===
--
--Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
--
--(% style="color:blue" %)**AT Command: AT+DISAT**
--
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
--|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
--
--(% style="color:blue" %)**Downlink Command:**
--
--No downlink command for this feature.
--
--
--=== 3.3.3 Get Device Status ===
--
--
  Send a LoRaWAN downlink to ask device send Alarm settings.
  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
@@ -858,200 +858,83 @@
  Sensor will upload Device Status via FPORT=5. See payload section for detail.
--=== 3.3.4 Enable / Disable Alarm ===
++=== 3.3.3 Set Temperature Alarm Threshold ===
--Feature: Enable/Disable Alarm for open/close event. Default value 0.
++* (% style="color:blue" %)**AT Command:**
--(% style="color:blue" %)**AT Command:**
++(% style="color:#037691" %)**AT+SHTEMP=min,max**
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
--|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
--|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
--|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
++* When min=0, and max≠0, Alarm higher than max
++* When min≠0, and max=0, Alarm lower than min
++* When min≠0 and max≠0, Alarm higher than max or lower than min
--(% style="color:blue" %)**Downlink Command:**
++Example:
--**0xA7 01**     ~/~/  Same As AT+DISALARM=1
++   AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
--**0xA7 00    ** ~/~/  Same As AT+DISALARM=0
++* (% style="color:blue" %)**Downlink Payload:**
++(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%)     ~/~/ Set AT+SHTEMP=0,30
--=== 3.3.5 Alarm Base on Timeout ===
++(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
--(((
--CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
--)))
++=== 3.3.4 Set Humidity Alarm Threshold ===
--(((
--(% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
--)))
++* (% style="color:blue" %)**AT Command:**
--(((
--**Keep Status = 1**: Monitor Close to Open event
--)))
++(% style="color:#037691" %)**AT+SHHUM=min,max**
--(((
--**Keep Status = 0**: Monitor Open to Close event
--)))
++* When min=0, and max≠0, Alarm higher than max
++* When min≠0, and max=0, Alarm lower than min
++* When min≠0 and max≠0, Alarm higher than max or lower than min
++Example:
--(((
--(% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
--)))
++   AT+SHHUM=70,0      ~/~/ Alarm when humidity lower than 70%.
--(((
--Range 0 ~~ 65535(0xFFFF) seconds.
--)))
++* (% style="color:blue" %)**Downlink Payload:**
--(((
--If** keep time = 0**, Disable Alarm Base on Timeout feature.
--)))
++(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)         ~/~/ Set AT+SHTHUM=70,0
--(((
--If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
--)))
++(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
--(((
--(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
--)))
++=== 3.3.5 Set Alarm Interval ===
--(((
--(% style="color:blue" %)**AT+TTRIG=1,30**(%%)   ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
--)))
--(((
--(% style="color:blue" %)**AT+TTIG=0,0 **(%%)      ~-~-> Default Value, disable timeout Alarm.
--)))
++The shortest time of two Alarm packet. (unit: min)
++* (% style="color:blue" %)**AT Command:**
--(((
--(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
--)))
++(% style="color:#037691" %)**AT+ATDC=30** (%%)      ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
--(((
--**Command: 0xA9 aa bb cc**
--)))
++* (% style="color:blue" %)**Downlink Payload:**
--(((
--**A9: **Command Type Code
--)))
++(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
--(((
--**aa: **status to be monitored
--)))
--(((
--**bb cc: **timeout.
--)))
++=== 3.3.6 Get Alarm settings ===
--(((
--If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
--)))
++Send a LoRaWAN downlink to ask device send Alarm settings.
--(((
--Or
--)))
++* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
--(((
--0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
--)))
++**Example:**
++[[image:image-20230524110211-4.png]]
--=== 3.3.6 Clear Flash Record ===
++**Explain:**
++* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
--Feature: Clear flash storage for data log feature.
--(% style="color:blue" %)**AT Command: AT+CLRDTA**
++=== 3.3.7 Set Interrupt Mode ===
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
--|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
--(((
--(% style="color:blue" %)**Downlink Command:**
--)))
--
--(((
--* **Example**: 0xA301     ~/~/  Same as AT+CLRDTA
--)))
--
--
--
--=== 3.3.7 Set trigger mode ===
--
--
--Feature: Set the trigger interrupt mode.
--
--(% style="color:blue" %)**AT Command: AT+TTRMOD**
--
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
--|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:157px" %)(((
--AT+TTRMOD=1
--)))|(% style="width:156px" %)Count and trigger from open to close (rising edge)|(% style="width:89px" %)(((
--(((
--OK
--)))
--)))
--|(% style="width:157px" %)(((
--AT+TTRMOD=0
--)))|(% style="width:156px" %)Count and trigger from close to open (falling edge)|(% style="width:89px" %)(((
--OK
--)))
--
--(% style="color:blue" %)**Downlink Command:**
--
--* **Example**: 0xA401       ~/~/  Same as AT+ TTRMOD =1
--
--
--
--=== 3.3.8 Set the calculate flag ===
--
--
--Feature: Set the calculate flag
--
--(% style="color:blue" %)**AT Command: AT+CALCFLAG**
--
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
--|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
--|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
--
--(% style="color:blue" %)**Downlink Command:**
--
--* **Example**: 0XA501         ~/~/  Same as AT+CALCFLAG =1
--
--
--
--=== 3.3.9 Set count number ===
--
--
--Feature: Manually set the count number
--
--(% style="color:blue" %)**AT Command: AT+SETCNT**
--
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
--|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
--|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
--
--(% style="color:blue" %)**Downlink Command:**
--
--* **Example**: 0xA6000001      ~/~/  Same as AT+ SETCNT =1
--
--* **Example**: 0xA6000064      ~/~/  Same as AT+ SETCNT =100
--
--
--
--=== 3.3.10 Set Interrupt Mode ===
--
--
  Feature, Set Interrupt mode for PA8 of pin.
  When AT+INTMOD=0 is set, PA8 is used as a digital input port.
@@ -1059,7 +1059,7 @@
  (% style="color:blue" %)**AT Command: AT+INTMOD**
  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
++|=(% style="width: 155px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3" %)**Response**
  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
  OK
@@ -1080,14 +1080,12 @@
  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
  * Example 1: Downlink Payload: 06000000       ~/~/  Turn off interrupt mode
--
  * Example 2: Downlink Payload: 06000003      ~/~/   Set the interrupt mode to rising edge trigger
++=== 3.3.8 Set Power Output Duration ===
--=== 3.3.11 Set Power Output Duration ===
--
  Control the output duration 5V . Before each sampling, device will
  ~1. first enable the power output to external sensor,
@@ -1099,7 +1099,7 @@
  (% style="color:blue" %)**AT Command: AT+5VT**
  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
++|=(% style="width: 155px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3" %)**Response**
  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
  OK
  |(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
@@ -1111,15 +1111,13 @@
  The first and second bytes are the time to turn on.
  * Example 1: Downlink Payload: 070000     **~-~-->**   AT+5VT=0
--
  * Example 2: Downlink Payload: 0701F4      **~-~-->**  AT+5VT=500
--
  = 4. Battery & Power Consumption =
--CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
++S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
@@ -1128,38 +1128,31 @@
  (% class="wikigeneratedid" %)
--User can change firmware CPL03-LB to:
++User can change firmware S31x-LB to:
  * Change Frequency band/ region.
--
  * Update with new features.
--
  * Fix bugs.
  Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
++
  Methods to Update Firmware:
  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
--
  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
--
  = 6. FAQ =
--== 6.1  AT Commands input doesn't work ==
--In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
--
--
  = 7. Order Info =
--Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
++Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
--(% style="color:red" %)**XXX**(%%): The default frequency band
++(% style="color:red" %)**XX**(%%): The default frequency band
  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
@@ -1178,13 +1178,12 @@
  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
--
  = 8. Packing Info =
  (% style="color:#037691" %)**Package Includes**:
--* CPL03-LB LoRaWAN Pulse/Contact Sensor
++* S31x-LB LoRaWAN Temperature & Humidity Sensor
  (% style="color:#037691" %)**Dimension and weight**:
@@ -1197,7 +1197,6 @@
  * Weight / pcs : g
--
  = 9. Support =

image-20230530111051-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.1 KB

Content

image-20230530111412-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.0 KB

Content

image-20230530135919-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-87.6 KB

Content