Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 64.8
edited by Xiaoling
on 2023/05/30 11:40
Change comment: There is no comment for this version
To version 62.6
edited by Xiaoling
on 2023/05/30 10:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -33,9 +33,6 @@
33 33  Each CPL03-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 34  
35 35  
36 -[[image:image-20230530111051-3.png||height="402" width="850"]]
37 -
38 -
39 39  == 1.2 ​Features ==
40 40  
41 41  
... ... @@ -96,7 +96,7 @@
96 96  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
97 97  
98 98  
99 -== 1.6 Button & LEDs ==
96 +== 1.5 Button & LEDs ==
100 100  
101 101  
102 102  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -115,7 +115,7 @@
115 115  )))
116 116  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
117 117  
118 -== 1.7 BLE connection ==
115 +== 1.6 BLE connection ==
119 119  
120 120  
121 121  CPL03-LB support BLE remote configure.
... ... @@ -130,12 +130,12 @@
130 130  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
131 131  
132 132  
133 -== 1.8 Pin Definitions ==
130 +== 1.7 Pin Definitions ==
134 134  
135 135  [[image:image-20230523174230-1.png]]
136 136  
137 137  
138 -== 1.9 Mechanical ==
135 +== 1.8 Mechanical ==
139 139  
140 140  
141 141  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -154,7 +154,6 @@
154 154  
155 155  The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
156 156  
157 -(% style="display:none" %) (%%)
158 158  
159 159  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
160 160  
... ... @@ -163,9 +163,7 @@
163 163  
164 164  The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
165 165  
166 -[[image:image-20230530111412-4.png||height="398" width="805"]](% style="display:none" %)
167 167  
168 -
169 169  (% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
170 170  
171 171  Each CPL03-LB is shipped with a sticker with the default device EUI as below:
... ... @@ -283,7 +283,7 @@
283 283  === 2.3.2 Sensor Configuration, FPORT~=4 ===
284 284  
285 285  
286 -CPL03-LB will only send this command after getting the downlink command (0x26 02) from the server.
280 +CPL01 will only send this command after getting the downlink command (0x26 02) from the server.
287 287  
288 288  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
289 289  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
... ... @@ -305,11 +305,11 @@
305 305  )))
306 306  
307 307  (((
308 -(% style="color:blue" %)** If Disalarm = 1**(%%), CPL03-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
302 +(% style="color:blue" %)** If Disalarm = 1**(%%), CPL01 will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
309 309  )))
310 310  
311 311  (((
312 -(% style="color:blue" %)** If Disalarm = 0**(%%), CPL03-LB will send uplink at every TDC periodically.
306 +(% style="color:blue" %)** If Disalarm = 0**(%%), CPL01 will send uplink at every TDC periodically.
313 313  
314 314  
315 315  )))
... ... @@ -319,7 +319,7 @@
319 319  )))
320 320  
321 321  (((
322 -Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.5AlarmBaseonTimeout"]]
316 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.5AlarmBaseonTimeout"]]
323 323  
324 324  
325 325  )))
... ... @@ -336,10 +336,10 @@
336 336  (% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
337 337  )))
338 338  
339 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860064987-743.png?width=730&height=152&rev=1.1||alt="1652860064987-743.png"]]
333 +[[image:1652860064987-743.png||height="152" width="730"]]
340 340  
341 341  
342 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860079526-831.png?width=729&height=209&rev=1.1||alt="1652860079526-831.png"]]
336 +[[image:1652860079526-831.png||height="209" width="729"]]
343 343  
344 344  
345 345  === 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
... ... @@ -347,13 +347,13 @@
347 347  
348 348  (((
349 349  (((
350 -CPL03-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL03-LB will:
344 +CPL01 will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL01 will:
351 351  )))
352 352  )))
353 353  
354 354  (((
355 355  (((
356 -periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
350 +periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].
357 357  )))
358 358  )))
359 359  
... ... @@ -366,7 +366,7 @@
366 366  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
367 367  |=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
368 368  |(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
369 -|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
363 +|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]
370 370  
371 371  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
372 372  |=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
... ... @@ -394,7 +394,7 @@
394 394  )))
395 395  
396 396  (((
397 -Refer: [[Set Calculate Flag>>||anchor="H3.3.8Setthecalculateflag"]]
391 +Refer: [[Set Calculate Flag>>||anchor="H3.9Setthecalculateflag"]]
398 398  
399 399  
400 400  )))
... ... @@ -404,7 +404,7 @@
404 404  )))
405 405  
406 406  (((
407 -See [[Alarm Base on Timeout>>||anchor="H3.3.5AlarmBaseonTimeout"]]
401 +See [[Alarm Base on Timeout>>||anchor="H3.5AlarmBaseonTimeout"]]
408 408  
409 409  
410 410  )))
... ... @@ -449,7 +449,7 @@
449 449  Unit: min.
450 450  )))
451 451  
452 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652860403792-491.png?width=735&height=153&rev=1.1||alt="1652860403792-491.png"]]
446 +[[image:1652860403792-491.png||height="153" width="735"]]
453 453  
454 454  
455 455  === 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
... ... @@ -463,12 +463,12 @@
463 463  
464 464  (% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
465 465  
466 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-1.png?width=720&height=628&rev=1.1||alt="image-20221013153352-1.png"]]
460 +[[image:image-20221013153352-1.png||height="628" width="720"]]
467 467  
468 468  
469 469  (% style="color:blue" %)**Payload:**
470 470  
471 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20221013153352-2.png?width=1215&height=167&rev=1.1||alt="image-20221013153352-2.png"]]
465 +[[image:image-20221013153352-2.png||height="167" width="1215"]]
472 472  
473 473  
474 474  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
... ... @@ -543,7 +543,7 @@
543 543  
544 544  
545 545  (((
546 -CPL03-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
540 +CPL01 stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
547 547  )))
548 548  
549 549  (((
... ... @@ -551,7 +551,7 @@
551 551  )))
552 552  
553 553  * (((
554 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL03-LB will send max bytes according to the current DR and Frequency bands.
548 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL01 will send max bytes according to the current DR and Frequency bands.
555 555  )))
556 556  
557 557  (((
... ... @@ -575,7 +575,7 @@
575 575  )))
576 576  
577 577  (((
578 -If CPL03-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
572 +If CPL01 doesn't have any data in the polling time. It will uplink 11 bytes of 0
579 579  
580 580  
581 581  )))
... ... @@ -587,7 +587,7 @@
587 587  **0x31 61 E9 3A D4 61 E9 3D E0 05**
588 588  )))
589 589  
590 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861353248-624.png?width=720&height=189&rev=1.1||alt="1652861353248-624.png"]]
584 +[[image:1652861353248-624.png||height="189" width="720"]]
591 591  
592 592  
593 593  (% style="color:blue" %)** Uplink:**
... ... @@ -651,7 +651,7 @@
651 651  
652 652  )))
653 653  
654 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861480446-216.png?rev=1.1||alt="1652861480446-216.png"]]
648 +[[image:1652861480446-216.png]]
655 655  
656 656  
657 657  == 2.4 Payload Decoder file ==
... ... @@ -665,19 +665,19 @@
665 665  == 2.5 Datalog Feature ==
666 666  
667 667  
668 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
662 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
669 669  
670 670  
671 671  === 2.5.1 Ways to get datalog via LoRaWAN ===
672 672  
673 673  
674 -Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
668 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
675 675  
676 676  * (((
677 -a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
671 +a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
678 678  )))
679 679  * (((
680 -b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
674 +b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
681 681  )))
682 682  
683 683  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -688,7 +688,7 @@
688 688  === 2.5.2 Unix TimeStamp ===
689 689  
690 690  
691 -CPL03-LB uses Unix TimeStamp format based on
685 +S31x-LB uses Unix TimeStamp format based on
692 692  
693 693  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
694 694  
... ... @@ -707,7 +707,7 @@
707 707  
708 708  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
709 709  
710 -Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
704 +Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
711 711  
712 712  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
713 713  
... ... @@ -728,7 +728,7 @@
728 728  )))
729 729  
730 730  (((
731 -For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
725 +For example, downlink command[[image:image-20220518162852-1.png]]
732 732  )))
733 733  
734 734  (((
... ... @@ -736,7 +736,7 @@
736 736  )))
737 737  
738 738  (((
739 -Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
733 +Uplink Internal =5s，means CPL01 will send one packet every 5s. range 5~~255s.
740 740  )))
741 741  
742 742  
... ... @@ -743,17 +743,17 @@
743 743  == 2.7 Frequency Plans ==
744 744  
745 745  
746 -The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
740 +The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
747 747  
748 748  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
749 749  
750 750  
751 -= 3. Configure CPL03-LB =
745 += 3. Configure S31x-LB =
752 752  
753 753  == 3.1 Configure Methods ==
754 754  
755 755  
756 -CPL03-LB supports below configure method:
750 +S31x-LB supports below configure method:
757 757  
758 758  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
759 759  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -783,6 +783,8 @@
783 783  
784 784  (((
785 785  Feature: Change LoRaWAN End Node Transmit Interval.
780 +
781 +
786 786  )))
787 787  
788 788  (((
... ... @@ -823,6 +823,7 @@
823 823  
824 824  )))
825 825  
822 +
826 826  === 3.3.2 Quit AT Command ===
827 827  
828 828  
... ... @@ -867,59 +867,88 @@
867 867  
868 868  **0xA7 00    ** ~/~/  Same As AT+DISALARM=0
869 869  
867 +(% style="color:red" %)**Notice, This command requires setting CPL01 to LDS03A Mode first. See **(%%)**"(% style="color:blue" %)3.7 Set the sensor mode"(%%)**
870 870  
869 +
871 871  === 3.3.5 Alarm Base on Timeout ===
872 872  
873 873  
874 874  (((
875 -CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
874 +(((
875 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
876 +
877 +
876 876  )))
879 +)))
877 877  
878 -
879 879  (((
882 +(((
880 880  (% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
881 881  )))
885 +)))
882 882  
883 883  (((
884 -**Keep Status = 1**: Monitor Close to Open event
888 +(((
889 +Keep Status = 1: Monitor Close to Open event
885 885  )))
891 +)))
886 886  
887 887  (((
888 -**Keep Status = 0**: Monitor Open to Close event
894 +(((
895 +Keep Status = 0: Monitor Open to Close event
896 +
897 +
889 889  )))
899 +)))
890 890  
891 -
892 892  (((
902 +(((
893 893  (% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
894 894  )))
905 +)))
895 895  
896 896  (((
908 +(((
897 897  Range 0 ~~ 65535(0xFFFF) seconds.
898 898  )))
911 +)))
899 899  
900 900  (((
901 -If** keep time = 0**, Disable Alarm Base on Timeout feature.
914 +(((
915 +If keep time = 0, Disable Alarm Base on Timeout feature.
902 902  )))
917 +)))
903 903  
904 904  (((
905 -If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
920 +(((
921 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
906 906  )))
907 907  
924 +(((
925 +
926 +)))
927 +)))
908 908  
909 909  (((
930 +(((
910 910  (% style="color:#4f81bd" %)**AT Command**(%%) to configure:
911 911  )))
912 912  
913 913  (((
914 -(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
935 +(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
915 915  )))
916 916  
917 917  (((
918 918  (% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
919 919  )))
941 +)))
920 920  
943 +(((
944 +
945 +)))
921 921  
922 922  (((
948 +(((
923 923  (% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
924 924  )))
925 925  
... ... @@ -926,31 +926,47 @@
926 926  (((
927 927  **Command: 0xA9 aa bb cc**
928 928  )))
955 +)))
929 929  
930 930  (((
931 -**A9: **Command Type Code
958 +(((
959 +A9: Command Type Code
932 932  )))
961 +)))
933 933  
934 934  (((
935 -**aa: **status to be monitored
964 +(((
965 +aa: status to be monitored
936 936  )))
967 +)))
937 937  
938 938  (((
939 -**bb cc: **timeout.
970 +(((
971 +bb cc: timeout.
940 940  )))
973 +)))
941 941  
975 +(((
976 +
977 +)))
942 942  
943 943  (((
980 +(((
944 944  If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
945 945  )))
983 +)))
946 946  
947 947  (((
986 +(((
948 948  Or
949 949  )))
989 +)))
950 950  
951 951  (((
992 +(((
952 952  0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
953 953  )))
995 +)))
954 954  
955 955  
956 956  === 3.3.6 Clear Flash Record ===
... ... @@ -958,23 +958,25 @@
958 958  
959 959  Feature: Clear flash storage for data log feature.
960 960  
961 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
962 962  
1004 +(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1005 +
963 963  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
964 964  |=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
965 965  |(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
966 966  
967 967  (((
968 -(% style="color:blue" %)**Downlink Command:**
1011 +(((
1012 +(% style="color:#4f81bd" %)**Downlink Command:**
969 969  )))
970 970  
971 971  (((
972 972  * **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
973 973  )))
1018 +)))
974 974  
975 975  
976 976  
977 -
978 978  === 3.3.7 Set trigger mode ===
979 979  
980 980  
... ... @@ -1001,6 +1001,11 @@
1001 1001  
1002 1002  * **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
1003 1003  
1048 +
1049 +
1050 +
1051 +
1052 +
1004 1004  === 3.3.8 Set the calculate flag ===
1005 1005  
1006 1006  
... ... @@ -1017,6 +1017,9 @@
1017 1017  
1018 1018  * **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
1019 1019  
1069 +
1070 +
1071 +
1020 1020  === 3.3.9 Set count number ===
1021 1021  
1022 1022  
... ... @@ -1035,6 +1035,9 @@
1035 1035  
1036 1036  * **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
1037 1037  
1090 +
1091 +
1092 +
1038 1038  === 3.3.10 Set Interrupt Mode ===
1039 1039  
1040 1040  
... ... @@ -1069,6 +1069,11 @@
1069 1069  
1070 1070  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1071 1071  
1127 +
1128 +
1129 +
1130 +
1131 +
1072 1072  === 3.3.11 Set Power Output Duration ===
1073 1073  
1074 1074  
... ... @@ -1095,13 +1095,12 @@
1095 1095  The first and second bytes are the time to turn on.
1096 1096  
1097 1097  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1098 -
1099 1099  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1100 1100  
1101 1101  = 4. Battery & Power Consumption =
1102 1102  
1103 1103  
1104 -CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1163 +S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1105 1105  
1106 1106  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1107 1107  
... ... @@ -1110,12 +1110,10 @@
1110 1110  
1111 1111  
1112 1112  (% class="wikigeneratedid" %)
1113 -User can change firmware CPL03-LB to:
1172 +User can change firmware S31x-LB to:
1114 1114  
1115 1115  * Change Frequency band/ region.
1116 -
1117 1117  * Update with new features.
1118 -
1119 1119  * Fix bugs.
1120 1120  
1121 1121  Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
... ... @@ -1124,23 +1124,18 @@
1124 1124  Methods to Update Firmware:
1125 1125  
1126 1126  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
1127 -
1128 1128  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1129 1129  
1130 1130  = 6. FAQ =
1131 1131  
1132 -== 6.1  AT Commands input doesn't work ==
1133 1133  
1134 1134  
1135 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1136 -
1137 -
1138 1138  = 7. Order Info =
1139 1139  
1140 1140  
1141 -Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
1193 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
1142 1142  
1143 -(% style="color:red" %)**XXX**(%%): The default frequency band
1195 +(% style="color:red" %)**XX**(%%): The default frequency band
1144 1144  
1145 1145  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1146 1146  
... ... @@ -1163,7 +1163,7 @@
1163 1163  
1164 1164  (% style="color:#037691" %)**Package Includes**:
1165 1165  
1166 -* CPL03-LB LoRaWAN Pulse/Contact Sensor
1218 +* S31x-LB LoRaWAN Temperature & Humidity Sensor
1167 1167  
1168 1168  (% style="color:#037691" %)**Dimension and weight**:
1169 1169  
image-20230530111051-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.1 KB
Content
image-20230530111412-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content