Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 60.16
edited by Xiaoling
on 2023/05/27 11:12
Change comment: There is no comment for this version
To version 70.10
edited by Xiaoling
on 2023/06/12 18:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
1 +DDS75-LB -- LoRaWAN Distance Detection Sensor User Manual
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
2 +[[image:image-20230612170349-1.png||height="656" width="656"]]
3 3  
4 4  
5 5  
... ... @@ -15,22 +15,22 @@
15 15  
16 16  = 1. Introduction =
17 17  
18 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
18 +== 1.1 What is LoRaWAN Distance Detection Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
21 +The Dragino DDS75-LB is a (% style="color:blue" %)** LoRaWAN Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:blue" %)** ultrasonic sensing technology**(%%) for (% style="color:blue" %)**distance measurement**(%%), and (% style="color:blue" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The DDS75-LB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
23 +It detects the distance(% style="color:blue" %)**  between the measured object and the sensor**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
24 24  
25 -The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 +The LoRa wireless technology used in SW3L-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
27 +SW3L-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
29 +SW3L-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
31 +Each SW3L-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
32 32  
33 -Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
33 +[[image:image-20230612170943-2.png||height="525" width="912"]]
34 34  
35 35  
36 36  == 1.2 ​Features ==
... ... @@ -37,39 +37,54 @@
37 37  
38 38  
39 39  * LoRaWAN 1.0.3 Class A
40 -* Ultra-low power consumption
41 -* External 3 meters SHT31 probe (For S31-LB)
42 -* Measure range -55°C ~~ 125°C
43 -* Temperature & Humidity alarm
44 44  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
41 +* Ultra-low power consumption
42 +* Distance Detection by Ultrasonic technology
43 +* Flat object range 280mm - 7500mm
44 +* Accuracy: ±(1cm+S*0.3%) (S: Distance)
45 +* Cable Length : 25cm
45 45  * Support Bluetooth v5.1 and LoRaWAN remote configure
46 46  * Support wireless OTA update firmware
47 -* Uplink on periodically
48 +* AT Commands to change parameters
48 48  * Downlink to change configure
50 +* IP66 Waterproof Enclosure
49 49  * 8500mAh Battery for long term use
50 50  
51 51  == 1.3 Specification ==
52 52  
53 53  
54 -(% style="color:#037691" %)**Common DC Characteristics:**
56 +(% style="color:#037691" %)**Rated environmental conditions:**
55 55  
56 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
57 -* Operating Temperature: -40 ~~ 85°C
58 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
59 +|(% style="background-color:#d9e2f3; color:#0070c0; width:163px" %)**Item**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)(((
60 +**Minimum value**
61 +)))|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)(((
62 +**Typical value**
63 +)))|(% style="background-color:#d9e2f3; color:#0070c0; width:87px" %)(((
64 +**Maximum value**
65 +)))|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Unit**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Remarks**
66 +|(% style="width:174px" %)Storage temperature|(% style="width:86px" %)-25|(% style="width:66px" %)25|(% style="width:90px" %)80|(% style="width:48px" %)℃|(% style="width:203px" %)
67 +|(% style="width:174px" %)Storage humidity|(% style="width:86px" %) |(% style="width:66px" %)65%|(% style="width:90px" %)90%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
68 +|(% style="width:174px" %)Operating temperature|(% style="width:86px" %)-15|(% style="width:66px" %)25|(% style="width:90px" %)60|(% style="width:48px" %)℃|(% style="width:203px" %)
69 +|(% style="width:174px" %)Working humidity|(% style="width:86px" %)(((
70 +
58 58  
59 -(% style="color:#037691" %)**Temperature Sensor:**
72 +
73 +)))|(% style="width:66px" %)65%|(% style="width:90px" %)80%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
60 60  
61 -* Range: -40 to + 80°C
62 -* Accuracy: ±0.2 @ 0-90 °C
63 -* Resolution: 0.1°C
64 -* Long Term Shift: <0.03 °C/yr
75 +(((
76 +**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);       **
65 65  
66 -(% style="color:#037691" %)**Humidity Sensor: **
78 +**~ b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
67 67  
68 -* Range: 0 ~~ 99.9% RH
69 -* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
70 -* Resolution: 0.01% RH
71 -* Long Term Shift: <0.25 %RH/yr
80 +
81 +)))
72 72  
83 +(% style="color:#037691" %)**Common DC Characteristics:**
84 +
85 +* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
86 +* Operating Temperature: -40 ~~ 85°C
87 +
73 73  (% style="color:#037691" %)**LoRa Spec:**
74 74  
75 75  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -90,15 +90,41 @@
90 90  * Sleep Mode: 5uA @ 3.3v
91 91  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
92 92  
93 -== 1.4 Sleep mode and working mode ==
108 +== 1.4 Effective measurement range Reference beam pattern ==
94 94  
95 95  
111 +**~1. The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
112 +
113 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852253176-749.png?rev=1.1||alt="1654852253176-749.png"]]
114 +
115 +
116 +**2. The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
117 +
118 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852175653-550.png?rev=1.1||alt="1654852175653-550.png"]]
119 +
120 +
121 +== 1.5 Applications ==
122 +
123 +
124 +* Horizontal distance measurement
125 +* Liquid level measurement
126 +* Parking management system
127 +* Object proximity and presence detection
128 +* Intelligent trash can management system
129 +* Robot obstacle avoidance
130 +* Automatic control
131 +* Sewer
132 +* Bottom water level monitoring
133 +
134 +== 1.6 Sleep mode and working mode ==
135 +
136 +
96 96  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97 97  
98 98  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
99 99  
100 100  
101 -== 1.5 Button & LEDs ==
142 +== 1.7 Button & LEDs ==
102 102  
103 103  
104 104  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -117,10 +117,10 @@
117 117  )))
118 118  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
119 119  
120 -== 1.6 BLE connection ==
161 +== 1.8 BLE connection ==
121 121  
122 122  
123 -S31x-LB support BLE remote configure.
164 +DDS75-LB support BLE remote configure.
124 124  
125 125  
126 126  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -132,56 +132,45 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7 Pin Definitions ==
176 +== 1.9 Pin Definitions ==
136 136  
137 137  [[image:image-20230523174230-1.png]]
138 138  
139 139  
140 -== 1.8 Hardware Variant ==
181 +== ==
141 141  
183 +== 2.10 Mechanical ==
142 142  
143 -(% border="1" cellspacing="5" style="width:510px" %)
144 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
145 -|(% style="width:102px" %)(((
146 -S31-LB
147 -)))|(% style="width:190px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:297px" %)(((
148 -1 x SHT31 Probe
149 149  
150 -Cable Length : 2 meters
186 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
151 151  
152 -
153 -)))
154 -|(% style="width:102px" %)(((
155 -S31B-LB
156 -)))|(% style="width:190px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:297px" %)(((
157 -1 x SHT31 Probe
158 158  
159 -Installed in device.
160 -)))
189 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
161 161  
162 -(% style="display:none" %)
163 163  
192 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
164 164  
165 165  
166 -== 1.9 Mechanical ==
195 +**Probe Mechanical:**
167 167  
168 168  
169 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
198 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-1.png?rev=1.1||alt="image-20220610172003-1.png"]]
170 170  
171 171  
172 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
201 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
173 173  
174 174  
175 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
204 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
176 176  
177 177  
178 -= 2. Configure S31x-LB to connect to LoRaWAN network =
207 += 2. Configure DDS75-LB to connect to LoRaWAN network =
179 179  
180 180  == 2.1 How it works ==
181 181  
182 182  
183 -The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
212 +The DDS75-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS75-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
184 184  
214 +(% style="display:none" %) (%%)
185 185  
186 186  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
187 187  
... ... @@ -188,13 +188,15 @@
188 188  
189 189  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
190 190  
191 -The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
221 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 192  
223 +[[image:image-20230612171032-3.png||height="492" width="855"]](% style="display:none" %)
193 193  
194 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
195 195  
196 -Each S31x-LB is shipped with a sticker with the default device EUI as below:
226 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS75-LB.
197 197  
228 +Each DDS75-LB is shipped with a sticker with the default device EUI as below:
229 +
198 198  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
199 199  
200 200  
... ... @@ -222,10 +222,10 @@
222 222  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
223 223  
224 224  
225 -(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
257 +(% style="color:blue" %)**Step 2:**(%%) Activate on DDS75-LB
226 226  
227 227  
228 -Press the button for 5 seconds to activate the S31x-LB.
260 +Press the button for 5 seconds to activate the DDS75-LB.
229 229  
230 230  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
231 231  
... ... @@ -232,174 +232,178 @@
232 232  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
233 233  
234 234  
235 -== 2.3 ​Uplink Payload ==
267 +== 2.3  ​Uplink Payload ==
236 236  
237 -=== 2.3.1 Device Status, FPORT~=5 ===
238 238  
270 +(((
271 +(((
272 +DDS75-LB will uplink payload via LoRaWAN with below payload format: 
273 +)))
239 239  
240 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
275 +(((
276 +Uplink payload includes in total 4 bytes.
277 +Payload for firmware version v1.1.4. . Before v1.1.3, there is on two fields: BAT and Distance
278 +)))
279 +)))
241 241  
242 -The Payload format is as below.
281 +(((
282 +
283 +)))
243 243  
285 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
286 +|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
287 +**Size(bytes)**
288 +)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
289 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
290 +[[Distance>>||anchor="H2.3.2A0Distance"]]
291 +(unit: mm)
292 +)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
293 +[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
294 +)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
244 244  
245 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
246 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
247 -|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
248 -|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
296 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
249 249  
250 -Example parse in TTNv3
251 251  
252 -[[image:image-20230524144422-1.png||height="174" width="1080"]]
299 +=== 2.3.1  Battery Info ===
253 253  
254 254  
255 -(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
302 +Check the battery voltage for DDS75-LB.
256 256  
257 -(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
304 +Ex1: 0x0B45 = 2885mV
258 258  
259 -(% style="color:#037691" %)**Frequency Band**:
306 +Ex2: 0x0B49 = 2889mV
260 260  
261 -*0x01: EU868
262 262  
263 -*0x02: US915
309 +=== 2.3.2  Distance ===
264 264  
265 -*0x03: IN865
266 266  
267 -*0x04: AU915
312 +(((
313 +Get the distance. Flat object range 280mm - 7500mm.
314 +)))
268 268  
269 -*0x05: KZ865
316 +(((
317 +For example, if the data you get from the register is 0x0B 0x05, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
270 270  
271 -*0x06: RU864
319 +(% style="color:#4472c4" %)**0B05(H) = 2821 (D) = 2821 mm.**
320 +)))
272 272  
273 -*0x07: AS923
274 274  
275 -*0x08: AS923-1
323 +* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
324 +* If the sensor value lower than 0x0118 (280mm), the sensor value will be invalid. Since v1.1.4, all value lower than 280mm will be set to 0x0014(20mm) which means the value is invalid.
276 276  
277 -*0x09: AS923-2
326 +=== 2.3.3  Interrupt Pin ===
278 278  
279 -*0x0a: AS923-3
280 280  
281 -*0x0b: CN470
329 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3A0SetInterruptMode"]] for the hardware and software set up.
282 282  
283 -*0x0c: EU433
331 +**Example:**
284 284  
285 -*0x0d: KR920
333 +0x00: Normal uplink packet.
286 286  
287 -*0x0e: MA869
335 +0x01: Interrupt Uplink Packet.
288 288  
289 289  
290 -(% style="color:#037691" %)**Sub-Band**:
338 +=== 2.3.4  DS18B20 Temperature sensor ===
291 291  
292 -AU915 and US915:value 0x00 ~~ 0x08
293 293  
294 -CN470: value 0x0B ~~ 0x0C
341 +This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
295 295  
296 -Other Bands: Always 0x00
343 +**Example**:
297 297  
345 +If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
298 298  
299 -(% style="color:#037691" %)**Battery Info**:
347 +If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
300 300  
301 -Check the battery voltage.
349 +(% style="color:red" %)**Note: DS18B20 feature is supported in the hardware version > v1.3 which made since early of 2021.**
302 302  
303 -Ex1: 0x0B45 = 2885mV
304 304  
305 -Ex2: 0x0B49 = 2889mV
352 +=== 2.3.5  Sensor Flag ===
306 306  
307 307  
308 -=== 2.3.2  Sensor Data. FPORT~=2 ===
355 +(((
356 +0x01: Detect Ultrasonic Sensor
357 +)))
309 309  
310 -
311 -Sensor Data is uplink via FPORT=2
312 -
313 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
314 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
315 -**Size(bytes)**
316 -)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
317 -|(% style="width:99px" %)Value|(% style="width:69px" %)(((
318 -Battery
319 -)))|(% style="width:130px" %)(((
320 -Unix TimeStamp
321 -)))|(% style="width:194px" %)(((
322 -Alarm Flag & MOD& Level of PA8
323 -)))|(% style="width:106px" %)(((
324 -Temperature
325 -)))|(% style="width:97px" %)(((
326 -Humidity
359 +(((
360 +0x00: No Ultrasonic Sensor
327 327  )))
328 328  
329 -[[image:image-20230524144456-2.png||height="180" width="1142"]]
330 330  
364 +=== 2.3.6  Decode payload in The Things Network ===
331 331  
332 -==== (% style="color:#4472c4" %)**Battery**(%%) ====
333 333  
334 -Sensor Battery Level.
367 +While using TTN network, you can add the payload format to decode the payload.
335 335  
336 -Ex1: 0x0B45 = 2885mV
369 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
337 337  
338 -Ex2: 0x0B49 = 2889mV
371 +The payload decoder function for TTN V3 is here:
339 339  
373 +(((
374 +DDS75-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
375 +)))
340 340  
341 341  
342 -==== (% style="color:#4472c4" %)**Temperature**(%%) ====
378 +== 2.4  Uplink Interval ==
343 343  
344 -**Example**:
345 345  
346 -If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
381 +The DDS75-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
347 347  
348 -If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
349 349  
350 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
384 +== 2.5  ​Show Data in DataCake IoT Server ==
351 351  
352 352  
353 -==== (% style="color:#4472c4" %)**Humidity**(%%) ====
387 +(((
388 +[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
389 +)))
354 354  
391 +(((
392 +
393 +)))
355 355  
356 -Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
395 +(((
396 +(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
397 +)))
357 357  
399 +(((
400 +(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
401 +)))
358 358  
359 -==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
360 360  
404 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
361 361  
362 -**Example:**
363 363  
364 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
407 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
365 365  
366 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
367 367  
368 -If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
410 +(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
369 369  
370 -If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
412 +(% style="color:blue" %)**Step 4**(%%)**: Search the DDS75-LB and add DevEUI.**
371 371  
372 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
414 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
373 373  
374 -If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
375 375  
417 +After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
376 376  
377 -== 2.4 Payload Decoder file ==
419 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
378 378  
379 379  
380 -In TTN, use can add a custom payload so it shows friendly reading
381 381  
382 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
423 +== 2.6 Datalog Feature ==
383 383  
384 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
385 385  
426 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, SW3L-LB will store the reading for future retrieving purposes.
386 386  
387 -== 2.5 Datalog Feature ==
388 388  
429 +=== 2.6.1 Ways to get datalog via LoRaWAN ===
389 389  
390 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
391 391  
432 +Set PNACKMD=1, SW3L-LB will wait for ACK for every uplink, when there is no LoRaWAN network,SW3L-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
392 392  
393 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
394 -
395 -
396 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
397 -
398 398  * (((
399 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
435 +a) SW3L-LB will do an ACK check for data records sending to make sure every data arrive server.
400 400  )))
401 401  * (((
402 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
438 +b) SW3L-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but SW3L-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if SW3L-LB gets a ACK, SW3L-LB will consider there is a network connection and resend all NONE-ACK messages.
403 403  )))
404 404  
405 405  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -407,10 +407,10 @@
407 407  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
408 408  
409 409  
410 -=== 2.5.2 Unix TimeStamp ===
446 +=== 2.6.2 Unix TimeStamp ===
411 411  
412 412  
413 -S31x-LB uses Unix TimeStamp format based on
449 +SW3L-LB uses Unix TimeStamp format based on
414 414  
415 415  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
416 416  
... ... @@ -424,144 +424,62 @@
424 424  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
425 425  
426 426  
427 -=== 2.5.3 Set Device Time ===
463 +=== 2.6.3 Set Device Time ===
428 428  
429 429  
430 430  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
431 431  
432 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
468 +Once SW3L-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to SW3L-LB. If SW3L-LB fails to get the time from the server, SW3L-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
433 433  
434 434  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
435 435  
436 436  
437 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
473 +=== 2.6.4 Poll sensor value ===
438 438  
439 439  
440 -The Datalog uplinks will use below payload format.
476 +Users can poll sensor values based on timestamps. Below is the downlink command.
441 441  
442 -**Retrieval data payload:**
478 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
479 +|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
480 +|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
481 +|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
443 443  
444 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
445 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
446 -**Size(bytes)**
447 -)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
448 -|(% style="width:103px" %)Value|(% style="width:68px" %)(((
449 -ignore
450 -)))|(% style="width:104px" %)(((
451 451  (((
452 -Humidity
484 +Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
453 453  )))
454 454  
455 455  (((
456 -
488 +For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
457 457  )))
458 -)))|(% style="width:87px" %)(((
459 -Temperature
460 -)))|(% style="width:178px" %)(((
461 -Poll message flag & Alarm Flag& Level of PA8
462 -)))|(% style="width:137px" %)Unix Time Stamp
463 463  
464 -**Poll message flag & Alarm Flag & Level of PA8:**
465 -
466 -[[image:image-20230524114302-1.png||height="115" width="736"]]
467 -
468 -
469 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
470 -
471 -**Poll Message Flag**: 1: This message is a poll message reply.
472 -
473 -* Poll Message Flag is set to 1.
474 -
475 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
476 -
477 -For example, in US915 band, the max payload for different DR is:
478 -
479 -**a) DR0:** max is 11 bytes so one entry of data
480 -
481 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
482 -
483 -**c) DR2:** total payload includes 11 entries of data
484 -
485 -**d) DR3: **total payload includes 22 entries of data.
486 -
487 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
488 -
489 -**Example:**
490 -
491 -If S31x-LB has below data inside Flash:
492 -
493 -[[image:image-20230524114654-2.png]]
494 -
495 -
496 -If user sends below downlink command: 31646D84E1646D856C05
497 -
498 -Where : Start time: 646D84E1 = time 23/5/24 03:30:41
499 -
500 - Stop time: 646D856C= time 23/5/24 03:33:00
501 -
502 -
503 -**S31x-LB will uplink this payload.**
504 -
505 -[[image:image-20230524114826-3.png||height="448" width="1244"]]
506 -
507 507  (((
508 -00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
492 +Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
509 509  )))
510 510  
511 511  (((
512 -Where the first 11 bytes is for the first entry:
496 +Uplink Internal =5s，means SW3L-LB will send one packet every 5s. range 5~~255s.
513 513  )))
514 514  
515 -(((
516 -00 00 02 36 01 10 40 64 6D 84 E1
517 -)))
518 518  
519 -(((
520 -**Hum**=0x0236/10=56.6
521 -)))
522 -
523 -(((
524 -**Temp**=0x0110/10=27.2
525 -)))
526 -
527 -(((
528 -**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
529 -)))
530 -
531 -(((
532 -**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
533 -)))
534 -
535 -
536 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
537 -
538 -== 2.6 Temperature Alarm Feature ==
539 -
540 -
541 -S31x-LB work flow with Alarm feature.
542 -
543 -
544 -[[image:image-20230524110125-3.png||height="768" width="1115"]]
545 -
546 -
547 -
548 548  == 2.7 Frequency Plans ==
549 549  
550 550  
551 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
503 +The SW3L-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
552 552  
553 553  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
554 554  
555 555  
556 -= 3. Configure S31x-LB =
508 += 3. Configure SW3L-LB =
557 557  
558 558  == 3.1 Configure Methods ==
559 559  
560 560  
561 -S31x-LB supports below configure method:
513 +SW3L-LB supports below configure method:
562 562  
563 563  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
516 +
564 564  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
518 +
565 565  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
566 566  
567 567  == 3.2 General Commands ==
... ... @@ -570,6 +570,7 @@
570 570  These commands are to configure:
571 571  
572 572  * General system settings like: uplink interval.
527 +
573 573  * LoRaWAN protocol & radio related command.
574 574  
575 575  They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
... ... @@ -577,21 +577,25 @@
577 577  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
578 578  
579 579  
580 -== 3.3 Commands special design for S31x-LB ==
535 +== 3.3 Commands special design for SW3L-LB ==
581 581  
582 582  
583 -These commands only valid for S31x-LB, as below:
538 +These commands only valid for SW3L-LB, as below:
584 584  
585 585  
586 586  === 3.3.1 Set Transmit Interval Time ===
587 587  
588 588  
544 +(((
589 589  Feature: Change LoRaWAN End Node Transmit Interval.
546 +)))
590 590  
548 +(((
591 591  (% style="color:blue" %)**AT Command: AT+TDC**
550 +)))
592 592  
593 593  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
594 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
553 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
595 595  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
596 596  30000
597 597  OK
... ... @@ -602,18 +602,44 @@
602 602  Set transmit interval to 60000ms = 60 seconds
603 603  )))
604 604  
564 +(((
605 605  (% style="color:blue" %)**Downlink Command: 0x01**
566 +)))
606 606  
568 +(((
607 607  Format: Command Code (0x01) followed by 3 bytes time value.
570 +)))
608 608  
572 +(((
609 609  If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
574 +)))
610 610  
611 -* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
612 -* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
576 +* (((
577 +Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
578 +)))
579 +* (((
580 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
581 +)))
613 613  
614 -=== 3.3.2 Get Device Status ===
583 +=== 3.3.2 Quit AT Command ===
615 615  
616 616  
586 +Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
587 +
588 +(% style="color:blue" %)**AT Command: AT+DISAT**
589 +
590 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
591 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
592 +|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
593 +
594 +(% style="color:blue" %)**Downlink Command:**
595 +
596 +No downlink command for this feature.
597 +
598 +
599 +=== 3.3.3 Get Device Status ===
600 +
601 +
617 617  Send a LoRaWAN downlink to ask device send Alarm settings.
618 618  
619 619  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
... ... @@ -621,82 +621,140 @@
621 621  Sensor will upload Device Status via FPORT=5. See payload section for detail.
622 622  
623 623  
624 -=== 3.3.3 Set Temperature Alarm Threshold ===
609 +=== 3.3.4 Alarm for continuously water flow ===
625 625  
626 626  
627 -* (% style="color:blue" %)**AT Command:**
612 +(((
613 +This feature is to monitor and send Alarm for continuously water flow.
614 +)))
628 628  
629 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
616 +(((
617 +Example case is for Toilet water monitoring, if some one push toilet button, the toilet will have water flow. If the toilet button has broken and can't returned to original state, the water flow will keep for hours or days which cause huge waste for water.
618 +)))
630 630  
631 -* When min=0, and max≠0, Alarm higher than max
632 -* When min≠0, and max=0, Alarm lower than min
633 -* When min≠0 and max≠0, Alarm higher than max or lower than min
620 +(((
621 +To monitor this faulty and send alarm, there are two settings:
622 +)))
634 634  
635 -Example:
624 +* (((
625 +(% style="color:#4f81bd" %)**Stop Duration: Unit: Second**
626 +)))
636 636  
637 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
628 +(((
629 +Default: 15s, If SW3L-LB didn't see any water flow in 15s, SW3L-LB will consider stop of water flow event.
630 +)))
638 638  
639 -* (% style="color:blue" %)**Downlink Payload:**
632 +* (((
633 +(% style="color:#4f81bd" %)**Alarm Timer: Units: Minute; Default 0 minutes (means Alarm disable)**
634 +)))
640 640  
641 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
636 +(((
637 +**Example:** 3 minutes, if SW3L-LB detect a start of water flow event and didn't detect a stop event within Alarm timer, SW3L-LB will send an Alarm to indicate a water flow abnormal alarm.
638 +)))
642 642  
643 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
640 +(((
641 +So for example, If we set stop duration=15s and Alarm Timer=3minutes. If the toilet water flow continuously for more than 3 minutes, Sensor will send an alarm (in Confirmed MODE) to platform.
642 +)))
644 644  
644 +(((
645 +(% style="color:red" %)**Note:** **After this alarm is send, sensor will consider a stop of water flow and count for another new event. So if water flow waste last for 1 hour, Sensor will keep sending alarm every 3 minutes.**
646 +)))
645 645  
646 -=== 3.3.4 Set Humidity Alarm Threshold ===
648 +(((
649 +(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
650 +)))
647 647  
652 +* (((
653 +AT+PTRIG=15,3  ~-~-> Set Stop duration: 15s, Alarm Timer: 3 minutes.
654 +)))
648 648  
649 -* (% style="color:blue" %)**AT Command:**
656 +* (((
657 +AT+ PTRIG=15,0  ~-~-> Default Value, disable water waste Alarm.
658 +)))
650 650  
651 -(% style="color:#037691" %)**AT+SHHUM=min,max**
660 +(((
661 +(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure: 
662 +)))
652 652  
653 -* When min=0, and max≠0, Alarm higher than max
654 -* When min≠0, and max=0, Alarm lower than min
655 -* When min≠0 and max≠0, Alarm higher than max or lower than min
664 +(((
665 +Command: **0xAA aa bb cc**
666 +)))
656 656  
657 -Example:
668 +(((
669 +AA: Command Type Code
670 +)))
658 658  
659 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
672 +(((
673 +aa: Stop duration
674 +)))
660 660  
661 -* (% style="color:blue" %)**Downlink Payload:**
676 +(((
677 +bb cc: Alarm Timer
678 +)))
662 662  
663 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
680 +(((
681 +If user send 0xAA 0F 00 03: equal to AT+PTRIG=15,3
682 +)))
664 664  
665 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
666 666  
685 +=== 3.3.5 Clear Flash Record ===
667 667  
668 -=== 3.3.5 Set Alarm Interval ===
669 669  
688 +Feature: Clear flash storage for data log feature.
670 670  
671 -The shortest time of two Alarm packet. (unit: min)
690 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
672 672  
673 -* (% style="color:blue" %)**AT Command:**
692 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
693 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
694 +|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
674 674  
675 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
696 +(((
697 +(% style="color:blue" %)**Downlink Command:**
698 +)))
676 676  
677 -* (% style="color:blue" %)**Downlink Payload:**
700 +(((
701 +* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
702 +)))
678 678  
679 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
680 680  
681 681  
682 -=== 3.3.6 Get Alarm settings ===
706 +=== 3.3.6 Set the calculate flag ===
683 683  
684 684  
685 -Send a LoRaWAN downlink to ask device send Alarm settings.
709 +Feature: Set the calculate flag
686 686  
687 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
711 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
688 688  
689 -**Example:**
713 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
714 +|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
715 +|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
716 +|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
690 690  
691 -[[image:image-20230524110211-4.png]]
718 +(% style="color:blue" %)**Downlink Command:**
692 692  
693 -**Explain:**
720 +* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
694 694  
695 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
722 +=== 3.3.7 Set count number ===
696 696  
697 -=== 3.3.7 Set Interrupt Mode ===
698 698  
725 +Feature: Manually set the count number
699 699  
727 +(% style="color:blue" %)**AT Command: AT+SETCNT**
728 +
729 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
730 +|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
731 +|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
732 +|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
733 +
734 +(% style="color:blue" %)**Downlink Command:**
735 +
736 +* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
737 +
738 +* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
739 +
740 +=== 3.3.8 Set Interrupt Mode ===
741 +
742 +
700 700  Feature, Set Interrupt mode for PA8 of pin.
701 701  
702 702  When AT+INTMOD=0 is set, PA8 is used as a digital input port.
... ... @@ -704,7 +704,7 @@
704 704  (% style="color:blue" %)**AT Command: AT+INTMOD**
705 705  
706 706  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
707 -|=(% style="width: 155px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3" %)**Response**
750 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
708 708  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
709 709  0
710 710  OK
... ... @@ -725,40 +725,32 @@
725 725  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
726 726  
727 727  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
771 +
728 728  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
729 729  
730 -=== 3.3.8 Set Power Output Duration ===
774 +=== 3.3.9 Set work mode ===
731 731  
732 732  
733 -Control the output duration 5V . Before each sampling, device will
777 +Feature: Manually set the work mode
734 734  
735 -~1. first enable the power output to external sensor,
736 736  
737 -2. keep it on as per duration, read sensor value and construct uplink payload
780 +(% style="color:blue" %)**AT Command: AT+MOD**
738 738  
739 -3. final, close the power output.
782 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:463px" %)
783 +|=(% style="width: 162px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 108px;background-color:#D9E2F3;color:#0070C0" %)**Response**
784 +|(% style="width:162px" %)AT+MOD=0|(% style="width:191px" %)Set the work mode to 0.|(% style="width:106px" %)OK
785 +|(% style="width:162px" %)AT+MOD=1|(% style="width:191px" %)Set the work mode to 1|(% style="width:106px" %)OK
740 740  
741 -(% style="color:blue" %)**AT Command: AT+5VT**
787 +(% style="color:blue" %)**Downlink Command:**
742 742  
743 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
744 -|=(% style="width: 155px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3" %)**Response**
745 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
746 -OK
747 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
789 +* **Example: **0x0A00  ~/~/  Same as AT+MOD=0
748 748  
749 -(% style="color:blue" %)**Downlink Command: 0x07**
791 +* **Example:** 0x0A01  ~/~/  Same as AT+MOD=1
750 750  
751 -Format: Command Code (0x07) followed by 2 bytes.
752 -
753 -The first and second bytes are the time to turn on.
754 -
755 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
756 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
757 -
758 758  = 4. Battery & Power Consumption =
759 759  
760 760  
761 -S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
796 +SW3L-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
762 762  
763 763  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
764 764  
... ... @@ -767,30 +767,36 @@
767 767  
768 768  
769 769  (% class="wikigeneratedid" %)
770 -User can change firmware S31x-LB to:
805 +User can change firmware SW3L-LB to:
771 771  
772 772  * Change Frequency band/ region.
808 +
773 773  * Update with new features.
810 +
774 774  * Fix bugs.
775 775  
776 776  Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
777 777  
778 -
779 779  Methods to Update Firmware:
780 780  
781 781  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
818 +
782 782  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
783 783  
784 784  = 6. FAQ =
785 785  
823 +== 6.1  AT Commands input doesn't work ==
786 786  
787 787  
826 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
827 +
828 +
788 788  = 7. Order Info =
789 789  
790 790  
791 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
832 +Part Number: (% style="color:blue" %)**SW3L-LB-XXX-YYY**
792 792  
793 -(% style="color:red" %)**XX**(%%): The default frequency band
834 +(% style="color:red" %)**XXX**(%%): The default frequency band
794 794  
795 795  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
796 796  
... ... @@ -808,12 +808,43 @@
808 808  
809 809  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
810 810  
852 +(((
853 +(% style="color:blue" %)**YYY**(%%): Flow Sensor Model:
854 +)))
855 +
856 +(((
857 + **004:** DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L
858 +)))
859 +
860 +(((
861 + **006:** DW-006 Flow Sensor: diameter: G3/4” / DN20. 390 pulse = 1 L
862 +)))
863 +
864 +(((
865 + **010:** DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L
866 +)))
867 +
868 +* (((
869 +calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
870 +)))
871 +
872 +* (((
873 +calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
874 +)))
875 +
876 +* (((
877 +calculate flag=2: for SW3L-010 Flow Sensor: 64  pulse = 1 L
878 +
879 +
880 +
881 +)))
882 +
811 811  = 8. ​Packing Info =
812 812  
813 813  
814 814  (% style="color:#037691" %)**Package Includes**:
815 815  
816 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
888 +* SW3L-LB LoRaWAN Flow Sensor
817 817  
818 818  (% style="color:#037691" %)**Dimension and weight**:
819 819  
image-20230530084138-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20230530084608-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20230530111051-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20230530111412-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
image-20230530135919-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.6 KB
Content
image-20230530135929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.6 KB
Content
image-20230530140053-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.3 MB
Content
image-20230612170349-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +164.2 KB
Content
image-20230612170943-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +86.4 KB
Content
image-20230612171032-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +86.4 KB
Content