Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 55.1
edited by Saxer Lin
on 2023/05/24 11:56
Change comment: There is no comment for this version
To version 67.8
edited by Xiaoling
on 2023/05/30 14:32
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
1 +SW3L-LB -- LoRaWAN Flow Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Xiaoling
Content
... ... @@ -1,9 +1,10 @@
1 1  (% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
2 +[[image:image-20230530140053-1.jpeg||height="645" width="645"]]
3 3  
4 4  
5 5  
6 6  
7 +
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -15,36 +15,40 @@
15 15  
16 16  = 1. Introduction =
17 17  
18 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
19 +== 1.1 What is SW3L-LB LoRaWAN Flow Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
22 +The Dragino SW3L-LB is a (% style="color:blue" %)**LoRaWAN Flow Sensor**(%%). It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to(% style="color:blue" %)** monitor the water usage for buildings.**
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 +The SW3L-LB will send water flow volume every 20 minutes. It can also (% style="color:blue" %)**detect the water flow status**(%%) and (% style="color:blue" %)**send Alarm**(%%), to avoid the waste for water usage such as broken toilet case.
24 24  
25 -The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 +SW3L-LB is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
28 +The LoRa wireless technology used in SW3L-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 +SW3L-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32 +SW3L-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32 32  
33 -Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 +Each SW3L-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 34  
35 35  
37 +[[image:image-20230530135919-1.png||height="404" width="806"]]
38 +
39 +
36 36  == 1.2 ​Features ==
37 37  
38 38  
39 39  * LoRaWAN 1.0.3 Class A
40 -* Ultra-low power consumption
41 -* External 3 meters SHT31 probe (For S31-LB)
42 -* Measure range -55°C ~~ 125°C
43 -* Temperature & Humidity alarm
44 44  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
45 +* Ultra-low power consumption
46 +* Upload water flow volume
47 +* Monitor water waste
48 +* AT Commands to change parameters
49 +* supports Datalog feature
45 45  * Support Bluetooth v5.1 and LoRaWAN remote configure
46 46  * Support wireless OTA update firmware
47 -* Uplink on periodically
52 +* Uplink on periodically and open/close event
48 48  * Downlink to change configure
49 49  * 8500mAh Battery for long term use
50 50  
... ... @@ -56,20 +56,6 @@
56 56  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
57 57  * Operating Temperature: -40 ~~ 85°C
58 58  
59 -(% style="color:#037691" %)**Temperature Sensor:**
60 -
61 -* Range: -40 to + 80°C
62 -* Accuracy: ±0.2 @ 0-90 °C
63 -* Resolution: 0.1°C
64 -* Long Term Shift: <0.03 °C/yr
65 -
66 -(% style="color:#037691" %)**Humidity Sensor: **
67 -
68 -* Range: 0 ~~ 99.9% RH
69 -* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
70 -* Resolution: 0.01% RH
71 -* Long Term Shift: <0.25 %RH/yr
72 -
73 73  (% style="color:#037691" %)**LoRa Spec:**
74 74  
75 75  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -90,15 +90,23 @@
90 90  * Sleep Mode: 5uA @ 3.3v
91 91  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
92 92  
93 -== 1.4 Sleep mode and working mode ==
84 +== 1.4 Applications ==
94 94  
95 95  
87 +* Flow Sensor application
88 +* Water Control
89 +* Toilet Flow Sensor
90 +* Monitor Waste water
91 +
92 +== 1.5 Sleep mode and working mode ==
93 +
94 +
96 96  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97 97  
98 98  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
99 99  
100 100  
101 -== 1.5 Button & LEDs ==
100 +== 1.6 Button & LEDs ==
102 102  
103 103  
104 104  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -117,10 +117,10 @@
117 117  )))
118 118  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
119 119  
120 -== 1.6 BLE connection ==
119 +== 1.7 BLE connection ==
121 121  
122 122  
123 -S31x-LB support BLE remote configure.
122 +SW3L-LB support BLE remote configure.
124 124  
125 125  
126 126  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -132,56 +132,58 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7 Pin Definitions ==
134 +== 1.8 Pin Definitions ==
136 136  
137 137  [[image:image-20230523174230-1.png]]
138 138  
139 139  
140 -== 1.8 Hardware Variant ==
139 +== 1.9 Flow Sensor Spec ==
141 141  
142 142  
142 +(((
143 143  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
144 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
145 -|(% style="width:102px" %)(((
146 -S31-LB
147 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
148 -1 x SHT31 Probe
144 +|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Model**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Probe**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Diameter**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Range**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Max Pressure**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Measure**
145 +|(% style="width:88px" %)SW3L-004|(% style="width:75px" %)DW-004|(% style="width:107px" %)G1/2" /DN15|(% style="width:101px" %)1~~30L/min|(% style="width:116px" %)≤ 2.0Mpa|(% style="width:124px" %)450 pulse = 1 L
146 +|(% style="width:88px" %)SW3L-006|(% style="width:75px" %)DW-006|(% style="width:107px" %)G3/4" /DN20|(% style="width:101px" %)1~~60L/min|(% style="width:116px" %)≤ 1.2Mpa|(% style="width:124px" %)390 pulse = 1 L
147 +|(% style="width:88px" %)SW3L-010|(% style="width:75px" %)DW-010|(% style="width:107px" %)G 1" /DN25|(% style="width:101px" %)2~~100L/min|(% style="width:116px" %)≤ 2.0Mpa|(% style="width:124px" %)64 pulse = 1 L
148 +)))
149 149  
150 -Cable Length : 2 meters
151 151  
152 -
153 -)))
154 -|(% style="width:102px" %)(((
155 -S31B-LB
156 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
157 -1 x SHT31 Probe
151 +== 2.10 Mechanical ==
158 158  
159 -Installed in device.
160 -)))
161 161  
162 -(% style="display:none" %)
154 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
163 163  
164 164  
157 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
165 165  
166 -== 1.9 Mechanical ==
167 167  
160 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
168 168  
169 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
170 170  
163 +(% style="color:blue" %)**DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L**
171 171  
172 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
165 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091350-1.png?width=722&height=385&rev=1.1||alt="image-20220519091350-1.png"]]
173 173  
174 174  
175 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
168 +(% style="color:blue" %)**006: DW-006 Flow Sensor: diameter: G3/4” / DN20.  390 pulse = 1 L**
176 176  
170 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091423-2.png?width=723&height=258&rev=1.1||alt="image-20220519091423-2.png"]]
177 177  
178 -= 2. Configure S31x-LB to connect to LoRaWAN network =
179 179  
173 +(% style="color:blue" %)**010: DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L**
174 +
175 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091423-3.png?width=724&height=448&rev=1.1||alt="image-20220519091423-3.png"]]
176 +
177 +
178 += 2. Configure CPL03-LB to connect to LoRaWAN network =
179 +
180 180  == 2.1 How it works ==
181 181  
182 182  
183 -The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
183 +The SW3L-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the SW3L-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
184 184  
185 +(% style="display:none" %) (%%)
185 185  
186 186  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
187 187  
... ... @@ -188,13 +188,15 @@
188 188  
189 189  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
190 190  
191 -The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 192  
194 +[[image:image-20230530135929-2.png||height="404" width="806"]](% style="display:none" %)
193 193  
194 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
195 195  
196 -Each S31x-LB is shipped with a sticker with the default device EUI as below:
197 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from SW3L-LB.
197 197  
199 +Each SW3L-LB is shipped with a sticker with the default device EUI as below:
200 +
198 198  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
199 199  
200 200  
... ... @@ -222,10 +222,10 @@
222 222  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
223 223  
224 224  
225 -(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
228 +(% style="color:blue" %)**Step 2:**(%%) Activate on SW3L-LB
226 226  
227 227  
228 -Press the button for 5 seconds to activate the S31x-LB.
231 +Press the button for 5 seconds to activate the SW3L-LB.
229 229  
230 230  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
231 231  
... ... @@ -237,8 +237,10 @@
237 237  === 2.3.1 Device Status, FPORT~=5 ===
238 238  
239 239  
240 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
243 +Include device configure status. Once SW3L-LB Joined the network, it will uplink this message to the server. After that, SW3L-LB will uplink Device Status every 12 hours.
241 241  
245 +Users can use the downlink command(**0x26 01**) to ask SW3L-LB to send device configure detail, include device configure status. SW3L-LB will uplink a payload via FPort=5 to server.
246 +
242 242  The Payload format is as below.
243 243  
244 244  
... ... @@ -249,10 +249,10 @@
249 249  
250 250  Example parse in TTNv3
251 251  
252 -[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
257 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652925144491-755.png?width=732&height=139&rev=1.1||alt="1652925144491-755.png"]]
253 253  
254 254  
255 -(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
260 +(% style="color:#037691" %)**Sensor Model**(%%): For SW3L-LB, this value is 0x11
256 256  
257 257  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
258 258  
... ... @@ -305,267 +305,355 @@
305 305  Ex2: 0x0B49 = 2889mV
306 306  
307 307  
308 -=== 2.3.2  Sensor Data. FPORT~=2 ===
313 +=== 2.3.2 Sensor Configuration, FPORT~=4 ===
309 309  
310 310  
311 -Sensor Data is uplink via FPORT=2
316 +SW3L will only send this command after getting the downlink command (0x26 02) from the server.
312 312  
313 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:700px" %)
314 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
315 -**Size(bytes)**
316 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width: 194px; background-color: rgb(217, 226, 243);" %)1|=(% style="width: 106px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 97px; background-color: rgb(217, 226, 243);" %)2
317 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
318 -[[Battery>>||anchor="HBattery"]]
319 -)))|(% style="width:130px" %)(((
320 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
321 -)))|(% style="width:194px" %)(((
322 -[[Alarm Flag&>>Alarm Flag& MOD& Level of PA8]]
318 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
319 +|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %) **Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:96px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:74px" %)**1**
320 +|**Value**|(% style="width:104px" %)TDC(unit:sec)|(% style="width:43px" %)N/A|(% style="width:91px" %)Stop Timer|(% style="width:100px" %)Alarm Timer|(% style="width:69px" %)Reserve
323 323  
324 -[[MOD&>>Alarm Flag& MOD& Level of PA8]]
322 +* (% style="color:#037691" %)**TDC: (default: 0x0004B0)**
325 325  
326 -[[Level of PA8>>Alarm Flag& MOD& Level of PA8]]
324 +Uplink interval for the total pulse count, default value is 0x0004B0 which is 1200 seconds = 20 minutes.
327 327  
328 -
329 -)))|(% style="width:106px" %)(((
330 -[[Temperature>>||anchor="HTemperature"]]
331 -)))|(% style="width:97px" %)(((
332 -[[Humidity>>||anchor="HHumidity"]]
333 -)))
334 334  
335 -==== (% style="color:#4472c4" %)**Battery**(%%) ====
327 +* (% style="color:#037691" %)**STOP Duration & Alarm Timer**
336 336  
337 -Sensor Battery Level.
329 +Shows the configure value of [[Alarm for continuously water flow>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]
338 338  
339 -Ex1: 0x0B45 = 2885mV
331 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095747-2.png?width=723&height=113&rev=1.1||alt="image-20220519095747-2.png"]]
340 340  
341 -Ex2: 0x0B49 = 2889mV
342 342  
334 +=== 2.3.3 Water Flow Value, Uplink FPORT~=2 ===
343 343  
344 344  
345 -==== (% style="color:#4472c4" %)**Temperature**(%%) ====
337 +(((
338 +SW3L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And SW3L will:
339 +)))
346 346  
347 -**Example**:
341 +(((
342 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].
343 +)))
348 348  
349 -If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
345 +(((
346 +Uplink Payload totals 11 bytes.
347 +)))
350 350  
351 -If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
349 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
350 +|=(% colspan="6" style="width: 510px;background-color:#D9E2F3;color:#0070C0" %)**Water Flow Value,  FPORT=2**
351 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:130px" %)**1**|(% style="width:130px" %)**4**|(% style="width:30px" %)**1**|(% style="width:50px" %)**1**|(% style="width:80px" %)**4**
352 +|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
353 +Total pulse Or Last Pulse
354 +)))|(% style="width:55px" %)MOD|(% style="width:115px" %)Reserve(0x01)|(% style="width:129px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]
352 352  
353 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
356 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:470px" %)
357 +|=(% colspan="4" style="width: 470px;background-color:#D9E2F3;color:#0070C0" %)**Status & Alarm field**
358 +|(% style="width:60px" %)**Size(bit)**|(% style="width:80px" %)**6**|(% style="width:310px" %)**1**|(% style="width:20px" %)**1**
359 +|(% style="width:88px" %)**Value**|(% style="width:117px" %)Calculate Flag|(% style="width:221px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:64px" %)N/A
354 354  
361 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-3.png?width=736&height=284&rev=1.1||alt="image-20220519095946-3.png"]]
355 355  
356 -==== (% style="color:#4472c4" %)**Humidity**(%%) ====
357 357  
364 +* (((
365 +(% style="color:#037691" %)**Calculate Flag**
366 +)))
358 358  
359 -Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
368 +(((
369 +The calculate flag is a user defined field, IoT server can use this flag to handle different meters with different pulse factors. For example, if there are 100 Flow Sensors, meters 1 ~~50 are 1 liter/pulse and meters 51 ~~ 100 has 1.5 liter/pulse.
370 +)))
360 360  
372 +(((
373 +**Example: in the default payload:**
374 +)))
361 361  
362 -==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
376 +* (((
377 +calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
378 +)))
379 +* (((
380 +calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
381 +)))
382 +* (((
383 +calculate flag=2: for SW3L-010 Flow Sensor: 64 pulse = 1 L
384 +)))
363 363  
386 +(((
387 +Default value: 0. 
388 +)))
364 364  
365 -**Example:**
390 +(((
391 +Range (6 bits): (b)000000 ~~ (b) 111111
366 366  
367 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
393 +If user use with a meter for example is 0.02L/pulse. To proper decode the correct value in server,
368 368  
369 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
395 +1) User can set the Calculate Flag of this sensor to 3.
370 370  
371 -If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
397 +2) In server side, when a sensor data arrive, the decoder will check the value of Calculate Flag, It the value is 3, the total volume = 0.02 x Pulse Count.
398 +)))
372 372  
373 -If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
400 +(((
401 +(% style="color:red" %)**NOTE: User need to set Calculate Flag to proper value before use Flow Sensor. Downlink or AT Command see: **(%%)Refer: [[Set Calculate Flag>>||anchor="H3.6Setthecalculateflag"]]
402 +)))
374 374  
375 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
404 +* (((
405 +(% style="color:#037691" %)**Alarm**
406 +)))
376 376  
377 -If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
408 +(((
409 +See [[Alarm for continuously water flow>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]
410 +)))
378 378  
412 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-4.png?width=724&height=65&rev=1.1||alt="image-20220519095946-4.png"]]
379 379  
380 -== 2.4 Payload Decoder file ==
381 381  
415 +* (((
416 +(% style="color:#037691" %)**Total pulse**
417 +)))
382 382  
383 -In TTN, use can add a custom payload so it shows friendly reading
419 +(((
420 +Total pulse/counting since factory
421 +)))
384 384  
385 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
423 +(((
424 +Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
425 +)))
386 386  
387 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
427 +* (((
428 +(% style="color:#037691" %)**Last Pulse**
429 +)))
388 388  
431 +(((
432 +Total pulse since last FPORT=2 uplink. (Default 20 minutes)
433 +)))
389 389  
390 -== 2.5 Datalog Feature ==
435 +(((
436 +Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
437 +)))
391 391  
439 +* (((
440 +(% style="color:#037691" %)**MOD: Default =0**
441 +)))
392 392  
393 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
443 +(((
444 +MOD=0 ~-~-> Uplink Total Pulse since factory
445 +)))
394 394  
447 +(((
448 +MOD=1 ~-~-> Uplink total pulse since last FPORT=2 uplink.
449 +)))
395 395  
396 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
451 +* (((
452 +(% style="color:#037691" %)**Water Flow Value**
453 +)))
397 397  
455 +(((
456 +**Total Water Flow Volume = (Calculate Flag) x (Total Pulse)=9597/450=21.3L**
457 +)))
398 398  
399 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
459 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-5.png?width=727&height=50&rev=1.1||alt="image-20220519095946-5.png"]]
400 400  
401 -* (((
402 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
461 +
462 +(((
463 +**Total Water Flow for TDC timer = (Calculate Flag) x (Last Pulse)=79/450=0.2L**
403 403  )))
404 -* (((
405 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
406 -)))
407 407  
408 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
466 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-6.png?width=733&height=43&rev=1.1||alt="image-20220519095946-6.png"]] ** **
409 409  
410 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
411 411  
469 +=== 2.3.4 Historical Water Flow Status, FPORT~=3 ===
412 412  
413 -=== 2.5.2 Unix TimeStamp ===
414 414  
472 +(((
473 +SW3L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
474 +)))
415 415  
416 -S31x-LB uses Unix TimeStamp format based on
476 +(((
477 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time water flow status.
478 +)))
417 417  
418 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
480 +* (((
481 +Each data entry is 11 bytes and has the same structure as [[real time water flow status>>||anchor="H2.3.3A0WaterFlowValue2CUplinkFPORT3D2"]], to save airtime and battery, SW3L will send max bytes according to the current DR and Frequency bands.
482 +)))
419 419  
420 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
484 +(((
485 +For example, in the US915 band, the max payload for different DR is:
486 +)))
421 421  
422 -Below is the converter example
488 +(((
489 +**a) DR0:** max is 11 bytes so one entry of data
490 +)))
423 423  
424 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
492 +(((
493 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
494 +)))
425 425  
496 +(((
497 +**c) DR2:** total payload includes 11 entries of data
498 +)))
426 426  
427 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
500 +(((
501 +**d) DR3:** total payload includes 22 entries of data.
502 +)))
428 428  
504 +(((
505 +If SW3L doesn't have any data in the polling time. It will uplink 11 bytes of 0
506 +)))
429 429  
430 -=== 2.5.3 Set Device Time ===
508 +(((
509 +(% style="color:#037691" %)**Downlink:**
510 +)))
431 431  
512 +(((
513 +0x31 62 46 B1 F0 62 46 B3 94 07
514 +)))
432 432  
433 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
516 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652926690850-712.png?width=726&height=115&rev=1.1||alt="1652926690850-712.png"]]
434 434  
435 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
436 436  
437 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
519 +(((
520 +(% style="color:#037691" %)**Uplink:**
521 +)))
438 438  
523 +(((
524 +00 00 01 00 00 00 00 62 46 B2 26 00 00 01 00 00 00 00 62 46 B2 5D 00 00 01 00 00 00 00 62 46 B2 99 00 00 01 00 00 00 00 62 46 B2 D5 00 00 01 00 00 01 15 62 46 B3 11 00 00 01 00 00 01 1F 62 46 B3 7E
525 +)))
439 439  
440 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
527 +(((
528 +(% style="color:#037691" %)**Parsed Value:**
529 +)))
441 441  
531 +(((
532 +[Alarm, Calculate Flag, MOD, Total pulse or Last Pulse,** **Water Flow Value, TIME]
533 +)))
442 442  
443 -The Datalog uplinks will use below payload format.
444 444  
445 -**Retrieval data payload:**
536 +(((
537 +[FALSE,0,0,0,0.0,2022-04-01 08:04:54],
538 +)))
446 446  
447 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:680px" %)
448 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
449 -**Size(bytes)**
450 -)))|=(% style="width: 68px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 87px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 178px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 137px; background-color: rgb(217, 226, 243);" %)**4**
451 -|(% style="width:103px" %)**Value**|(% style="width:68px" %)(((
452 -ignore
453 -)))|(% style="width:104px" %)(((
454 454  (((
455 -Humidity
541 +[FALSE,0,0,0,0.0,2022-04-01 08:05:49],
456 456  )))
457 457  
458 458  (((
459 -
545 +[FALSE,0,0,0,0.0,2022-04-01 08:06:49],
460 460  )))
461 -)))|(% style="width:87px" %)(((
462 -Temperature
463 -)))|(% style="width:178px" %)(((
464 -Poll message flag &
465 465  
466 -Alarm Flag&
548 +(((
549 +[FALSE,0,0,0,0.0,2022-04-01 08:07:49],
550 +)))
467 467  
468 -Level of PA8
469 -)))|(% style="width:137px" %)Unix Time Stamp
552 +(((
553 +[FALSE,0,0,277,0.6,2022-04-01 08:08:49],
554 +)))
470 470  
471 -**Poll message flag & Alarm Flag & Level of PA8:**
556 +(((
557 +[FALSE,0,0,287,0.6,2022-04-01 08:10:38],
558 +)))
472 472  
473 -[[image:image-20230524114302-1.png||height="115" width="736"]]
560 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652926777796-267.png?width=724&height=279&rev=1.1||alt="1652926777796-267.png"]]
474 474  
475 475  
476 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
563 +== 2.4 Payload Decoder file ==
477 477  
478 -**Poll Message Flag**: 1: This message is a poll message reply.
479 479  
480 -* Poll Message Flag is set to 1.
566 +In TTN, use can add a custom payload so it shows friendly reading
481 481  
482 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
568 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
483 483  
484 -For example, in US915 band, the max payload for different DR is:
485 485  
486 -**a) DR0:** max is 11 bytes so one entry of data
571 +== 2.5 Datalog Feature ==
487 487  
488 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
489 489  
490 -**c) DR2:** total payload includes 11 entries of data
574 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
491 491  
492 -**d) DR3: **total payload includes 22 entries of data.
493 493  
494 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
577 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
495 495  
496 -**Example:**
497 497  
498 -If S31x-LB has below data inside Flash:
580 +Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
499 499  
500 -[[image:image-20230524114654-2.png]]
582 +* (((
583 +a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
584 +)))
585 +* (((
586 +b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
587 +)))
501 501  
589 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
502 502  
503 -If user sends below downlink command: 31646D84E1646D856C05
591 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
504 504  
505 -Where : Start time: 646D84E1 = time 23/5/24 03:30:41
506 506  
507 - Stop time: 646D856C= time 23/5/24 03:33:00
594 +=== 2.5.2 Unix TimeStamp ===
508 508  
509 509  
510 -**S31x-LB will uplink this payload.**
597 +CPL03-LB uses Unix TimeStamp format based on
511 511  
512 -[[image:image-20230524114826-3.png]]
599 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
513 513  
514 -(((
515 -00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
516 -)))
601 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
517 517  
518 -(((
519 -Where the first 11 bytes is for the first entry:
520 -)))
603 +Below is the converter example
521 521  
522 -(((
523 -00 00 02 36 01 10 40 64 6D 84 E1
524 -)))
605 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
525 525  
526 -(((
527 -**Hum**=0x0236/10=56.6
528 -)))
529 529  
530 -(((
531 -**Temp**=0x0110/10=27.2
532 -)))
608 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
533 533  
534 -(((
535 -**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
536 -)))
537 537  
538 -(((
539 -**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
540 -)))
611 +=== 2.5.3 Set Device Time ===
541 541  
542 542  
543 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
614 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
544 544  
545 -== 2.6 Temperature Alarm Feature ==
616 +Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
546 546  
618 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
547 547  
548 -S31x-LB work flow with Alarm feature.
549 549  
621 +=== 2.5.4 Poll sensor value ===
550 550  
551 -[[image:image-20230524110125-3.png||height="768" width="1115"]]
552 552  
624 +Users can poll sensor values based on timestamps. Below is the downlink command.
553 553  
626 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
627 +|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
628 +|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
629 +|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
554 554  
631 +(((
632 +Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
633 +)))
634 +
635 +(((
636 +For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
637 +)))
638 +
639 +(((
640 +Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
641 +)))
642 +
643 +(((
644 +Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
645 +)))
646 +
647 +
555 555  == 2.7 Frequency Plans ==
556 556  
557 557  
558 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
651 +The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
559 559  
560 560  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
561 561  
562 562  
563 -= 3. Configure S31x-LB =
656 += 3. Configure CPL03-LB =
564 564  
565 565  == 3.1 Configure Methods ==
566 566  
567 567  
568 -S31x-LB supports below configure method:
661 +CPL03-LB supports below configure method:
569 569  
570 570  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
571 571  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -584,21 +584,25 @@
584 584  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
585 585  
586 586  
587 -== 3.3 Commands special design for S31x-LB ==
680 +== 3.3 Commands special design for CPL03-LB ==
588 588  
589 589  
590 -These commands only valid for S31x-LB, as below:
683 +These commands only valid for CPL03-LB, as below:
591 591  
592 592  
593 593  === 3.3.1 Set Transmit Interval Time ===
594 594  
595 595  
689 +(((
596 596  Feature: Change LoRaWAN End Node Transmit Interval.
691 +)))
597 597  
693 +(((
598 598  (% style="color:blue" %)**AT Command: AT+TDC**
695 +)))
599 599  
600 600  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
601 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
698 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
602 602  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
603 603  30000
604 604  OK
... ... @@ -609,18 +609,47 @@
609 609  Set transmit interval to 60000ms = 60 seconds
610 610  )))
611 611  
709 +(((
612 612  (% style="color:blue" %)**Downlink Command: 0x01**
711 +)))
613 613  
713 +(((
614 614  Format: Command Code (0x01) followed by 3 bytes time value.
715 +)))
615 615  
717 +(((
616 616  If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
719 +)))
617 617  
618 -* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
619 -* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
721 +* (((
722 +Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
723 +)))
724 +* (((
725 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
620 620  
621 -=== 3.3.2 Get Device Status ===
622 622  
728 +
729 +)))
623 623  
731 +=== 3.3.2 Quit AT Command ===
732 +
733 +
734 +Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
735 +
736 +(% style="color:blue" %)**AT Command: AT+DISAT**
737 +
738 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
739 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
740 +|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
741 +
742 +(% style="color:blue" %)**Downlink Command:**
743 +
744 +No downlink command for this feature.
745 +
746 +
747 +=== 3.3.3 Get Device Status ===
748 +
749 +
624 624  Send a LoRaWAN downlink to ask device send Alarm settings.
625 625  
626 626  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
... ... @@ -628,82 +628,194 @@
628 628  Sensor will upload Device Status via FPORT=5. See payload section for detail.
629 629  
630 630  
631 -=== 3.3.3 Set Temperature Alarm Threshold ===
757 +=== 3.3.4 Enable / Disable Alarm ===
632 632  
633 633  
634 -* (% style="color:blue" %)**AT Command:**
760 +Feature: Enable/Disable Alarm for open/close event. Default value 0.
635 635  
636 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
762 +(% style="color:blue" %)**AT Command:**
637 637  
638 -* When min=0, and max≠0, Alarm higher than max
639 -* When min≠0, and max=0, Alarm lower than min
640 -* When min≠0 and max≠0, Alarm higher than max or lower than min
764 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
765 +|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
766 +|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
767 +|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
641 641  
642 -Example:
769 +(% style="color:blue" %)**Downlink Command:**
643 643  
644 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
771 +**0xA7 01**  ~/~/  Same As AT+DISALARM=1
645 645  
646 -* (% style="color:blue" %)**Downlink Payload:**
773 +**0xA7 00    ** ~/~/  Same As AT+DISALARM=0
647 647  
648 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
649 649  
650 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
776 +=== 3.3.5 Alarm Base on Timeout ===
651 651  
652 652  
653 -=== 3.3.4 Set Humidity Alarm Threshold ===
779 +(((
780 +CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
781 +)))
654 654  
655 655  
656 -* (% style="color:blue" %)**AT Command:**
784 +(((
785 +(% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
786 +)))
657 657  
658 -(% style="color:#037691" %)**AT+SHHUM=min,max**
788 +(((
789 +**Keep Status = 1**: Monitor Close to Open event
790 +)))
659 659  
660 -* When min=0, and max≠0, Alarm higher than max
661 -* When min≠0, and max=0, Alarm lower than min
662 -* When min≠0 and max≠0, Alarm higher than max or lower than min
792 +(((
793 +**Keep Status = 0**: Monitor Open to Close event
794 +)))
663 663  
664 -Example:
665 665  
666 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
797 +(((
798 +(% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
799 +)))
667 667  
668 -* (% style="color:blue" %)**Downlink Payload:**
801 +(((
802 +Range 0 ~~ 65535(0xFFFF) seconds.
803 +)))
669 669  
670 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
805 +(((
806 +If** keep time = 0**, Disable Alarm Base on Timeout feature.
807 +)))
671 671  
672 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
809 +(((
810 +If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
811 +)))
673 673  
674 674  
675 -=== 3.3.5 Set Alarm Interval ===
814 +(((
815 +(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
816 +)))
676 676  
818 +(((
819 +(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
820 +)))
677 677  
678 -The shortest time of two Alarm packet. (unit: min)
822 +(((
823 +(% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
824 +)))
679 679  
680 -* (% style="color:blue" %)**AT Command:**
681 681  
682 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
827 +(((
828 +(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
829 +)))
683 683  
684 -* (% style="color:blue" %)**Downlink Payload:**
831 +(((
832 +**Command: 0xA9 aa bb cc**
833 +)))
685 685  
686 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
835 +(((
836 +**A9: **Command Type Code
837 +)))
687 687  
839 +(((
840 +**aa: **status to be monitored
841 +)))
688 688  
689 -=== 3.3.6 Get Alarm settings ===
843 +(((
844 +**bb cc: **timeout.
845 +)))
690 690  
691 691  
692 -Send a LoRaWAN downlink to ask device send Alarm settings.
848 +(((
849 +If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
850 +)))
693 693  
694 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
852 +(((
853 +Or
854 +)))
695 695  
696 -**Example:**
856 +(((
857 +0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
858 +)))
697 697  
698 -[[image:image-20230524110211-4.png]]
699 699  
700 -**Explain:**
861 +=== 3.3.6 Clear Flash Record ===
701 701  
702 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
703 703  
704 -=== 3.3.7 Set Interrupt Mode ===
864 +Feature: Clear flash storage for data log feature.
705 705  
866 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
706 706  
868 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
869 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
870 +|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
871 +
872 +(((
873 +(% style="color:blue" %)**Downlink Command:**
874 +)))
875 +
876 +(((
877 +* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
878 +)))
879 +
880 +
881 +
882 +=== 3.3.7 Set trigger mode ===
883 +
884 +
885 +Feature: Set the trigger interrupt mode.
886 +
887 +(% style="color:blue" %)**AT Command: AT+TTRMOD**
888 +
889 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
890 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
891 +|(% style="width:157px" %)(((
892 +AT+TTRMOD=1
893 +)))|(% style="width:156px" %)Count and trigger from open to close (rising edge)|(% style="width:89px" %)(((
894 +(((
895 +OK
896 +)))
897 +)))
898 +|(% style="width:157px" %)(((
899 +AT+TTRMOD=0
900 +)))|(% style="width:156px" %)Count and trigger from close to open (falling edge)|(% style="width:89px" %)(((
901 +OK
902 +)))
903 +
904 +(% style="color:blue" %)**Downlink Command:**
905 +
906 +* **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
907 +
908 +=== 3.3.8 Set the calculate flag ===
909 +
910 +
911 +Feature: Set the calculate flag
912 +
913 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
914 +
915 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
916 +|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
917 +|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
918 +|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
919 +
920 +(% style="color:blue" %)**Downlink Command:**
921 +
922 +* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
923 +
924 +=== 3.3.9 Set count number ===
925 +
926 +
927 +Feature: Manually set the count number
928 +
929 +(% style="color:blue" %)**AT Command: AT+SETCNT**
930 +
931 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
932 +|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
933 +|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
934 +|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
935 +
936 +(% style="color:blue" %)**Downlink Command:**
937 +
938 +* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
939 +
940 +* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
941 +
942 +=== 3.3.10 Set Interrupt Mode ===
943 +
944 +
707 707  Feature, Set Interrupt mode for PA8 of pin.
708 708  
709 709  When AT+INTMOD=0 is set, PA8 is used as a digital input port.
... ... @@ -711,7 +711,7 @@
711 711  (% style="color:blue" %)**AT Command: AT+INTMOD**
712 712  
713 713  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
714 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
952 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
715 715  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
716 716  0
717 717  OK
... ... @@ -732,9 +732,10 @@
732 732  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
733 733  
734 734  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
973 +
735 735  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
736 736  
737 -=== 3.3.8 Set Power Output Duration ===
976 +=== 3.3.11 Set Power Output Duration ===
738 738  
739 739  
740 740  Control the output duration 5V . Before each sampling, device will
... ... @@ -748,7 +748,7 @@
748 748  (% style="color:blue" %)**AT Command: AT+5VT**
749 749  
750 750  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
751 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
990 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
752 752  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
753 753  OK
754 754  |(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
... ... @@ -760,12 +760,13 @@
760 760  The first and second bytes are the time to turn on.
761 761  
762 762  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1002 +
763 763  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
764 764  
765 765  = 4. Battery & Power Consumption =
766 766  
767 767  
768 -S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1008 +CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
769 769  
770 770  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
771 771  
... ... @@ -774,30 +774,36 @@
774 774  
775 775  
776 776  (% class="wikigeneratedid" %)
777 -User can change firmware S31x-LB to:
1017 +User can change firmware CPL03-LB to:
778 778  
779 779  * Change Frequency band/ region.
1020 +
780 780  * Update with new features.
1022 +
781 781  * Fix bugs.
782 782  
783 783  Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
784 784  
785 -
786 786  Methods to Update Firmware:
787 787  
788 788  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
1030 +
789 789  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
790 790  
791 791  = 6. FAQ =
792 792  
1035 +== 6.1  AT Commands input doesn't work ==
793 793  
794 794  
1038 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1039 +
1040 +
795 795  = 7. Order Info =
796 796  
797 797  
798 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
1044 +Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
799 799  
800 -(% style="color:red" %)**XX**(%%): The default frequency band
1046 +(% style="color:red" %)**XXX**(%%): The default frequency band
801 801  
802 802  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
803 803  
... ... @@ -820,7 +820,7 @@
820 820  
821 821  (% style="color:#037691" %)**Package Includes**:
822 822  
823 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
1069 +* CPL03-LB LoRaWAN Pulse/Contact Sensor
824 824  
825 825  (% style="color:#037691" %)**Dimension and weight**:
826 826  
image-20230524144422-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.9 KB
Content
image-20230524144456-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.9 KB
Content
image-20230527093155-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.3 KB
Content
image-20230527093214-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20230530084138-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20230530084608-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20230530111051-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20230530111412-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
image-20230530135919-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.6 KB
Content
image-20230530135929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.6 KB
Content
image-20230530140053-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.3 MB
Content