Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 47.1
edited by Saxer Lin
on 2023/05/24 10:54
Change comment: Uploaded new attachment "image-20230524105433-1.png", version {1}
To version 67.10
edited by Xiaoling
on 2023/05/30 14:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
1 +SW3L-LB -- LoRaWAN Flow Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Xiaoling
Content
... ... @@ -1,9 +1,10 @@
1 1  (% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
2 +[[image:image-20230530140053-1.jpeg||height="645" width="645"]]
3 3  
4 4  
5 5  
6 6  
7 +
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -15,36 +15,40 @@
15 15  
16 16  = 1. Introduction =
17 17  
18 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
19 +== 1.1 What is SW3L-LB LoRaWAN Flow Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
22 +The Dragino SW3L-LB is a (% style="color:blue" %)**LoRaWAN Flow Sensor**(%%). It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to(% style="color:blue" %)** monitor the water usage for buildings.**
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 +The SW3L-LB will send water flow volume every 20 minutes. It can also (% style="color:blue" %)**detect the water flow status**(%%) and (% style="color:blue" %)**send Alarm**(%%), to avoid the waste for water usage such as broken toilet case.
24 24  
25 -The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 +SW3L-LB is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
28 +The LoRa wireless technology used in SW3L-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 +SW3L-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32 +SW3L-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32 32  
33 -Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 +Each SW3L-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 34  
35 35  
37 +[[image:image-20230530135919-1.png||height="404" width="806"]]
38 +
39 +
36 36  == 1.2 ​Features ==
37 37  
38 38  
39 39  * LoRaWAN 1.0.3 Class A
40 -* Ultra-low power consumption
41 -* External 3 meters SHT31 probe (For S31-LB)
42 -* Measure range -55°C ~~ 125°C
43 -* Temperature & Humidity alarm
44 44  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
45 +* Ultra-low power consumption
46 +* Upload water flow volume
47 +* Monitor water waste
48 +* AT Commands to change parameters
49 +* supports Datalog feature
45 45  * Support Bluetooth v5.1 and LoRaWAN remote configure
46 46  * Support wireless OTA update firmware
47 -* Uplink on periodically
52 +* Uplink on periodically and open/close event
48 48  * Downlink to change configure
49 49  * 8500mAh Battery for long term use
50 50  
... ... @@ -56,20 +56,6 @@
56 56  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
57 57  * Operating Temperature: -40 ~~ 85°C
58 58  
59 -(% style="color:#037691" %)**Temperature Sensor:**
60 -
61 -* Range: -40 to + 80°C
62 -* Accuracy: ±0.2 @ 0-90 °C
63 -* Resolution: 0.1°C
64 -* Long Term Shift: <0.03 °C/yr
65 -
66 -(% style="color:#037691" %)**Humidity Sensor: **
67 -
68 -* Range: 0 ~~ 99.9% RH
69 -* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
70 -* Resolution: 0.01% RH
71 -* Long Term Shift: <0.25 %RH/yr
72 -
73 73  (% style="color:#037691" %)**LoRa Spec:**
74 74  
75 75  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -90,15 +90,23 @@
90 90  * Sleep Mode: 5uA @ 3.3v
91 91  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
92 92  
93 -== 1.4 Sleep mode and working mode ==
84 +== 1.4 Applications ==
94 94  
95 95  
87 +* Flow Sensor application
88 +* Water Control
89 +* Toilet Flow Sensor
90 +* Monitor Waste water
91 +
92 +== 1.5 Sleep mode and working mode ==
93 +
94 +
96 96  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97 97  
98 98  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
99 99  
100 100  
101 -== 1.5 Button & LEDs ==
100 +== 1.6 Button & LEDs ==
102 102  
103 103  
104 104  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -117,10 +117,10 @@
117 117  )))
118 118  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
119 119  
120 -== 1.6 BLE connection ==
119 +== 1.7 BLE connection ==
121 121  
122 122  
123 -S31x-LB support BLE remote configure.
122 +SW3L-LB support BLE remote configure.
124 124  
125 125  
126 126  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -132,56 +132,58 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7 Pin Definitions ==
134 +== 1.8 Pin Definitions ==
136 136  
137 137  [[image:image-20230523174230-1.png]]
138 138  
139 139  
140 -== 1.8 Hardware Variant ==
139 +== 1.9 Flow Sensor Spec ==
141 141  
142 142  
142 +(((
143 143  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
144 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
145 -|(% style="width:102px" %)(((
146 -S31-LB
147 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
148 -1 x SHT31 Probe
144 +|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Model**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Probe**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Diameter**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Range**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Max Pressure**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Measure**
145 +|(% style="width:88px" %)SW3L-004|(% style="width:75px" %)DW-004|(% style="width:107px" %)G1/2" /DN15|(% style="width:101px" %)1~~30L/min|(% style="width:116px" %)≤ 2.0Mpa|(% style="width:124px" %)450 pulse = 1 L
146 +|(% style="width:88px" %)SW3L-006|(% style="width:75px" %)DW-006|(% style="width:107px" %)G3/4" /DN20|(% style="width:101px" %)1~~60L/min|(% style="width:116px" %)≤ 1.2Mpa|(% style="width:124px" %)390 pulse = 1 L
147 +|(% style="width:88px" %)SW3L-010|(% style="width:75px" %)DW-010|(% style="width:107px" %)G 1" /DN25|(% style="width:101px" %)2~~100L/min|(% style="width:116px" %)≤ 2.0Mpa|(% style="width:124px" %)64 pulse = 1 L
148 +)))
149 149  
150 -Cable Length : 2 meters
151 151  
152 -
153 -)))
154 -|(% style="width:102px" %)(((
155 -S31B-LB
156 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
157 -1 x SHT31 Probe
151 +== 2.10 Mechanical ==
158 158  
159 -Installed in device.
160 -)))
161 161  
162 -(% style="display:none" %)
154 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
163 163  
164 164  
157 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
165 165  
166 -== 1.9 Mechanical ==
167 167  
160 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
168 168  
169 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
170 170  
163 +(% style="color:blue" %)**DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L**
171 171  
172 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
165 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091350-1.png?width=722&height=385&rev=1.1||alt="image-20220519091350-1.png"]]
173 173  
174 174  
175 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
168 +(% style="color:blue" %)**006: DW-006 Flow Sensor: diameter: G3/4” / DN20.  390 pulse = 1 L**
176 176  
170 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091423-2.png?width=723&height=258&rev=1.1||alt="image-20220519091423-2.png"]]
177 177  
178 -= 2. Configure S31x-LB to connect to LoRaWAN network =
179 179  
173 +(% style="color:blue" %)**010: DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L**
174 +
175 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091423-3.png?width=724&height=448&rev=1.1||alt="image-20220519091423-3.png"]]
176 +
177 +
178 += 2. Configure CPL03-LB to connect to LoRaWAN network =
179 +
180 180  == 2.1 How it works ==
181 181  
182 182  
183 -The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
183 +The SW3L-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the SW3L-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
184 184  
185 +(% style="display:none" %) (%%)
185 185  
186 186  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
187 187  
... ... @@ -188,13 +188,15 @@
188 188  
189 189  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
190 190  
191 -The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 192  
194 +[[image:image-20230530135929-2.png||height="404" width="806"]](% style="display:none" %)
193 193  
194 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
195 195  
196 -Each S31x-LB is shipped with a sticker with the default device EUI as below:
197 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from SW3L-LB.
197 197  
199 +Each SW3L-LB is shipped with a sticker with the default device EUI as below:
200 +
198 198  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
199 199  
200 200  
... ... @@ -222,10 +222,10 @@
222 222  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
223 223  
224 224  
225 -(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
228 +(% style="color:blue" %)**Step 2:**(%%) Activate on SW3L-LB
226 226  
227 227  
228 -Press the button for 5 seconds to activate the S31x-LB.
231 +Press the button for 5 seconds to activate the SW3L-LB.
229 229  
230 230  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
231 231  
... ... @@ -237,8 +237,10 @@
237 237  === 2.3.1 Device Status, FPORT~=5 ===
238 238  
239 239  
240 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
243 +Include device configure status. Once SW3L-LB Joined the network, it will uplink this message to the server. After that, SW3L-LB will uplink Device Status every 12 hours.
241 241  
245 +Users can use the downlink command(**0x26 01**) to ask SW3L-LB to send device configure detail, include device configure status. SW3L-LB will uplink a payload via FPort=5 to server.
246 +
242 242  The Payload format is as below.
243 243  
244 244  
... ... @@ -249,10 +249,10 @@
249 249  
250 250  Example parse in TTNv3
251 251  
252 -[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
257 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652925144491-755.png?width=732&height=139&rev=1.1||alt="1652925144491-755.png"]]
253 253  
254 254  
255 -(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
260 +(% style="color:#037691" %)**Sensor Model**(%%): For SW3L-LB, this value is 0x11
256 256  
257 257  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
258 258  
... ... @@ -305,261 +305,355 @@
305 305  Ex2: 0x0B49 = 2889mV
306 306  
307 307  
308 -=== 2.3.2  Sensor Data. FPORT~=2 ===
313 +=== 2.3.2 Sensor Configuration, FPORT~=4 ===
309 309  
310 310  
311 -Sensor Data is uplink via FPORT=2
316 +SW3L will only send this command after getting the downlink command (0x26 02) from the server.
312 312  
313 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:700px" %)
314 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
315 -**Size(bytes)**
316 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width: 194px; background-color: rgb(217, 226, 243);" %)1|=(% style="width: 106px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 97px; background-color: rgb(217, 226, 243);" %)2
317 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
318 -[[Battery>>||anchor="HBattery"]]
319 -)))|(% style="width:130px" %)(((
320 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
321 -)))|(% style="width:194px" %)(((
322 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]][[&>>Alarm Flag& MOD& Digital Interrupt(PA8)]]
318 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
319 +|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %) **Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:96px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:74px" %)**1**
320 +|**Value**|(% style="width:104px" %)TDC(unit:sec)|(% style="width:43px" %)N/A|(% style="width:91px" %)Stop Timer|(% style="width:100px" %)Alarm Timer|(% style="width:69px" %)Reserve
323 323  
324 -[[MOD&>>Alarm Flag& MOD& Digital Interrupt(PA8)]]
322 +* (% style="color:#037691" %)**TDC: (default: 0x0004B0)**
325 325  
326 -[[Digital Interrupt(PA8)>>Alarm Flag& MOD& Digital Interrupt(PA8)]]
324 +Uplink interval for the total pulse count, default value is 0x0004B0 which is 1200 seconds = 20 minutes.
327 327  
328 -
329 -)))|(% style="width:106px" %)(((
330 -[[Temperature>>||anchor="HTemperature"]]
331 -)))|(% style="width:97px" %)(((
332 -[[Humidity>>||anchor="HHumidity"]]
326 +
327 +* (% style="color:#037691" %)**STOP Duration & Alarm Timer**
328 +
329 +Shows the configure value of [[Alarm for continuously water flow>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]
330 +
331 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095747-2.png?width=723&height=113&rev=1.1||alt="image-20220519095747-2.png"]]
332 +
333 +
334 +=== 2.3.3 Water Flow Value, Uplink FPORT~=2 ===
335 +
336 +
337 +(((
338 +SW3L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And SW3L will:
333 333  )))
334 334  
335 -==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
341 +(((
342 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].
343 +)))
336 336  
337 -Sensor Battery Level.
345 +(((
346 +Uplink Payload totals 11 bytes.
347 +)))
338 338  
339 -Ex1: 0x0B45 = 2885mV
349 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
350 +|=(% colspan="6" style="width: 510px;background-color:#D9E2F3;color:#0070C0" %)**Water Flow Value,  FPORT=2**
351 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:130px" %)**1**|(% style="width:130px" %)**4**|(% style="width:30px" %)**1**|(% style="width:50px" %)**1**|(% style="width:80px" %)**4**
352 +|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
353 +Total pulse Or Last Pulse
354 +)))|(% style="width:55px" %)MOD|(% style="width:115px" %)Reserve(0x01)|(% style="width:129px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]
340 340  
341 -Ex2: 0x0B49 = 2889mV
356 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:470px" %)
357 +|=(% colspan="4" style="width: 470px;background-color:#D9E2F3;color:#0070C0" %)**Status & Alarm field**
358 +|(% style="width:60px" %)**Size(bit)**|(% style="width:80px" %)**6**|(% style="width:310px" %)**1**|(% style="width:20px" %)**1**
359 +|(% style="width:88px" %)**Value**|(% style="width:117px" %)Calculate Flag|(% style="width:221px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:64px" %)N/A
342 342  
361 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-3.png?width=736&height=284&rev=1.1||alt="image-20220519095946-3.png"]]
343 343  
344 344  
345 -==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
364 +* (((
365 +(% style="color:#037691" %)**Calculate Flag**
366 +)))
346 346  
347 -**Example**:
368 +(((
369 +The calculate flag is a user defined field, IoT server can use this flag to handle different meters with different pulse factors. For example, if there are 100 Flow Sensors, meters 1 ~~50 are 1 liter/pulse and meters 51 ~~ 100 has 1.5 liter/pulse.
370 +)))
348 348  
349 -If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
372 +(((
373 +**Example: in the default payload:**
374 +)))
350 350  
351 -If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
376 +* (((
377 +calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
378 +)))
379 +* (((
380 +calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
381 +)))
382 +* (((
383 +calculate flag=2: for SW3L-010 Flow Sensor: 64 pulse = 1 L
384 +)))
352 352  
353 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
386 +(((
387 +Default value: 0. 
388 +)))
354 354  
390 +(((
391 +Range (6 bits): (b)000000 ~~ (b) 111111
355 355  
356 -==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
393 +If user use with a meter for example is 0.02L/pulse. To proper decode the correct value in server,
357 357  
395 +1) User can set the Calculate Flag of this sensor to 3.
358 358  
359 -Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
397 +2) In server side, when a sensor data arrive, the decoder will check the value of Calculate Flag, It the value is 3, the total volume = 0.02 x Pulse Count.
398 +)))
360 360  
400 +(((
401 +(% style="color:red" %)**NOTE: User need to set Calculate Flag to proper value before use Flow Sensor. Downlink or AT Command see: **(%%)Refer: [[Set Calculate Flag>>||anchor="H3.6Setthecalculateflag"]]
402 +)))
361 361  
362 -==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag & MOD & Digital Interrupt**(%%) ====
404 +* (((
405 +(% style="color:#037691" %)**Alarm**
406 +)))
363 363  
408 +(((
409 +See [[Alarm for continuously water flow>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]
410 +)))
364 364  
365 -**Example:**
412 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-4.png?width=724&height=65&rev=1.1||alt="image-20220519095946-4.png"]]
366 366  
367 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
368 368  
369 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
415 +* (((
416 +(% style="color:#037691" %)**Total pulse**
417 +)))
370 370  
371 -If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
419 +(((
420 +Total pulse/counting since factory
421 +)))
372 372  
373 -If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
423 +(((
424 +Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
425 +)))
374 374  
375 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
427 +* (((
428 +(% style="color:#037691" %)**Last Pulse**
429 +)))
376 376  
377 -If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
431 +(((
432 +Total pulse since last FPORT=2 uplink. (Default 20 minutes)
433 +)))
378 378  
435 +(((
436 +Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
437 +)))
379 379  
380 -== 2.4 Payload Decoder file ==
439 +* (((
440 +(% style="color:#037691" %)**MOD: Default =0**
441 +)))
381 381  
443 +(((
444 +MOD=0 ~-~-> Uplink Total Pulse since factory
445 +)))
382 382  
383 -In TTN, use can add a custom payload so it shows friendly reading
447 +(((
448 +MOD=1 ~-~-> Uplink total pulse since last FPORT=2 uplink.
449 +)))
384 384  
385 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
451 +* (((
452 +(% style="color:#037691" %)**Water Flow Value**
453 +)))
386 386  
387 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
455 +(((
456 +**Total Water Flow Volume = (Calculate Flag) x (Total Pulse)=9597/450=21.3L**
457 +)))
388 388  
459 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-5.png?width=727&height=50&rev=1.1||alt="image-20220519095946-5.png"]]
389 389  
390 -== 2.5 Datalog Feature ==
391 391  
462 +(((
463 +**Total Water Flow for TDC timer = (Calculate Flag) x (Last Pulse)=79/450=0.2L**
464 +)))
392 392  
393 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
466 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-6.png?width=733&height=43&rev=1.1||alt="image-20220519095946-6.png"]] ** **
394 394  
395 395  
396 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
469 +=== 2.3.4 Historical Water Flow Status, FPORT~=3 ===
397 397  
398 398  
399 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
472 +(((
473 +SW3L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
474 +)))
400 400  
401 -* (((
402 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
476 +(((
477 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time water flow status.
403 403  )))
479 +
404 404  * (((
405 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
481 +Each data entry is 11 bytes and has the same structure as [[real time water flow status>>||anchor="H2.3.3A0WaterFlowValue2CUplinkFPORT3D2"]], to save airtime and battery, SW3L will send max bytes according to the current DR and Frequency bands.
406 406  )))
407 407  
408 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
484 +(((
485 +For example, in the US915 band, the max payload for different DR is:
486 +)))
409 409  
410 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
488 +(((
489 +(% style="color:blue" %)**a) DR0:(%%)** max is 11 bytes so one entry of data
490 +)))
411 411  
492 +(((
493 +(% style="color:blue" %)**b) DR1:(%%)** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
494 +)))
412 412  
413 -=== 2.5.2 Unix TimeStamp ===
496 +(((
497 +(% style="color:blue" %)**c) DR2:(%%)** total payload includes 11 entries of data
498 +)))
414 414  
500 +(((
501 +(% style="color:blue" %)**d) DR3:(%%)** total payload includes 22 entries of data.
502 +)))
415 415  
416 -S31x-LB uses Unix TimeStamp format based on
504 +(((
505 +If SW3L doesn't have any data in the polling time. It will uplink 11 bytes of 0
506 +)))
417 417  
418 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
508 +(((
509 +(% style="color:#037691" %)**Downlink:**
510 +)))
419 419  
420 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
512 +(((
513 +0x31 62 46 B1 F0 62 46 B3 94 07
514 +)))
421 421  
422 -Below is the converter example
516 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652926690850-712.png?width=726&height=115&rev=1.1||alt="1652926690850-712.png"]]
423 423  
424 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
425 425  
519 +(((
520 +(% style="color:#037691" %)**Uplink:**
521 +)))
426 426  
427 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
523 +(((
524 +00 00 01 00 00 00 00 62 46 B2 26 00 00 01 00 00 00 00 62 46 B2 5D 00 00 01 00 00 00 00 62 46 B2 99 00 00 01 00 00 00 00 62 46 B2 D5 00 00 01 00 00 01 15 62 46 B3 11 00 00 01 00 00 01 1F 62 46 B3 7E
525 +)))
428 428  
527 +(((
528 +(% style="color:#037691" %)**Parsed Value:**
529 +)))
429 429  
430 -=== 2.5.3 Set Device Time ===
531 +(((
532 +[Alarm, Calculate Flag, MOD, Total pulse or Last Pulse,** **Water Flow Value, TIME]
533 +)))
431 431  
432 432  
433 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
536 +(((
537 +[FALSE,0,0,0,0.0,2022-04-01 08:04:54],
538 +)))
434 434  
435 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
540 +(((
541 +[FALSE,0,0,0,0.0,2022-04-01 08:05:49],
542 +)))
436 436  
437 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
544 +(((
545 +[FALSE,0,0,0,0.0,2022-04-01 08:06:49],
546 +)))
438 438  
548 +(((
549 +[FALSE,0,0,0,0.0,2022-04-01 08:07:49],
550 +)))
439 439  
440 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
552 +(((
553 +[FALSE,0,0,277,0.6,2022-04-01 08:08:49],
554 +)))
441 441  
556 +(((
557 +[FALSE,0,0,287,0.6,2022-04-01 08:10:38],
558 +)))
442 442  
443 -The Datalog uplinks will use below payload format.
560 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652926777796-267.png?width=724&height=279&rev=1.1||alt="1652926777796-267.png"]]
444 444  
445 -**Retrieval data payload:**
446 446  
447 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:680px" %)
448 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
449 -**Size(bytes)**
450 -)))|=(% style="width: 68px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 87px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 178px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 137px; background-color: rgb(217, 226, 243);" %)**4**
451 -|(% style="width:103px" %)**Value**|(% style="width:68px" %)(((
452 -ignore
453 -)))|(% style="width:104px" %)(((
454 -Temperature
455 -)))|(% style="width:87px" %)Humidity|(% style="width:178px" %)(((
456 -Poll message flag &
563 +== 2.4 Payload Decoder file ==
457 457  
458 -Alarm Flag&
459 459  
460 -Digital Interrupt
461 -)))|(% style="width:137px" %)Unix Time Stamp
566 +In TTN, use can add a custom payload so it shows friendly reading
462 462  
463 -**Poll message flag & Alarm Flag & Digital Interrupt:**
568 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
464 464  
465 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
466 466  
467 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
571 +== 2.5 Datalog Feature ==
468 468  
469 -**Poll Message Flag**: 1: This message is a poll message reply.
470 470  
471 -* Poll Message Flag is set to 1.
574 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
472 472  
473 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
474 474  
475 -For example, in US915 band, the max payload for different DR is:
577 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
476 476  
477 -**a) DR0:** max is 11 bytes so one entry of data
478 478  
479 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
580 +Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
480 480  
481 -**c) DR2:** total payload includes 11 entries of data
582 +* (((
583 +a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
584 +)))
585 +* (((
586 +b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
587 +)))
482 482  
483 -**d) DR3: **total payload includes 22 entries of data.
589 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
484 484  
485 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
591 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
486 486  
487 487  
488 -**Example:**
594 +=== 2.5.2 Unix TimeStamp ===
489 489  
490 -If S31x-LB has below data inside Flash:
491 491  
492 -[[image:1682646494051-944.png]]
597 +CPL03-LB uses Unix TimeStamp format based on
493 493  
494 -If user sends below downlink command: 3160065F9760066DA705
599 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
495 495  
496 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
601 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
497 497  
498 - Stop time: 60066DA7= time 21/1/19 05:27:03
603 +Below is the converter example
499 499  
605 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
500 500  
501 -**S31x-LB will uplink this payload.**
502 502  
503 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
608 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
504 504  
505 -(((
506 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
507 -)))
508 508  
509 -(((
510 -Where the first 11 bytes is for the first entry:
511 -)))
611 +=== 2.5.3 Set Device Time ===
512 512  
513 -(((
514 -7FFF089801464160065F97
515 -)))
516 516  
517 -(((
518 -**Ext sensor data**=0x7FFF/100=327.67
519 -)))
614 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
520 520  
616 +Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
617 +
618 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
619 +
620 +
621 +=== 2.5.4 Poll sensor value ===
622 +
623 +
624 +Users can poll sensor values based on timestamps. Below is the downlink command.
625 +
626 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
627 +|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
628 +|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
629 +|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
630 +
521 521  (((
522 -**Temp**=0x088E/100=22.00
632 +Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
523 523  )))
524 524  
525 525  (((
526 -**Hum**=0x014B/10=32.6
636 +For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
527 527  )))
528 528  
529 529  (((
530 -**poll message flag & Ext**=0x41,means reply data,Ext=1
640 +Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
531 531  )))
532 532  
533 533  (((
534 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
644 +Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
535 535  )))
536 536  
537 537  
538 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
539 -
540 -== 2.6 Temperature Alarm Feature ==
541 -
542 -
543 -S31x-LB work flow with Alarm feature.
544 -
545 -
546 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
547 -
548 -
549 549  == 2.7 Frequency Plans ==
550 550  
551 551  
552 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
651 +The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
553 553  
554 554  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
555 555  
556 556  
557 -= 3. Configure S31x-LB =
656 += 3. Configure CPL03-LB =
558 558  
559 559  == 3.1 Configure Methods ==
560 560  
561 561  
562 -S31x-LB supports below configure method:
661 +CPL03-LB supports below configure method:
563 563  
564 564  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
565 565  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -578,21 +578,25 @@
578 578  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
579 579  
580 580  
581 -== 3.3 Commands special design for S31x-LB ==
680 +== 3.3 Commands special design for CPL03-LB ==
582 582  
583 583  
584 -These commands only valid for S31x-LB, as below:
683 +These commands only valid for CPL03-LB, as below:
585 585  
586 586  
587 587  === 3.3.1 Set Transmit Interval Time ===
588 588  
589 589  
689 +(((
590 590  Feature: Change LoRaWAN End Node Transmit Interval.
691 +)))
591 591  
693 +(((
592 592  (% style="color:blue" %)**AT Command: AT+TDC**
695 +)))
593 593  
594 594  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
595 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
698 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
596 596  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
597 597  30000
598 598  OK
... ... @@ -603,18 +603,47 @@
603 603  Set transmit interval to 60000ms = 60 seconds
604 604  )))
605 605  
709 +(((
606 606  (% style="color:blue" %)**Downlink Command: 0x01**
711 +)))
607 607  
713 +(((
608 608  Format: Command Code (0x01) followed by 3 bytes time value.
715 +)))
609 609  
717 +(((
610 610  If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
719 +)))
611 611  
612 -* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
613 -* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
721 +* (((
722 +Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
723 +)))
724 +* (((
725 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
726 +)))
614 614  
615 -=== 3.3.2 Get Device Status ===
616 616  
617 617  
730 +
731 +=== 3.3.2 Quit AT Command ===
732 +
733 +
734 +Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
735 +
736 +(% style="color:blue" %)**AT Command: AT+DISAT**
737 +
738 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
739 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
740 +|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
741 +
742 +(% style="color:blue" %)**Downlink Command:**
743 +
744 +No downlink command for this feature.
745 +
746 +
747 +=== 3.3.3 Get Device Status ===
748 +
749 +
618 618  Send a LoRaWAN downlink to ask device send Alarm settings.
619 619  
620 620  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
... ... @@ -622,83 +622,146 @@
622 622  Sensor will upload Device Status via FPORT=5. See payload section for detail.
623 623  
624 624  
625 -=== 3.3.3 Set Temperature Alarm Threshold ===
757 +== 3.3.4 Alarm for continuously water flow ==
626 626  
627 627  
628 -* (% style="color:blue" %)**AT Command:**
760 +(((
761 +This feature is to monitor and send Alarm for continuously water flow.
762 +)))
629 629  
630 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
764 +(((
765 +Example case is for Toilet water monitoring, if some one push toilet button, the toilet will have water flow. If the toilet button has broken and can't returned to original state, the water flow will keep for hours or days which cause huge waste for water.
766 +)))
631 631  
632 -* When min=0, and max≠0, Alarm higher than max
633 -* When min≠0, and max=0, Alarm lower than min
634 -* When min≠0 and max≠0, Alarm higher than max or lower than min
768 +(((
769 +To monitor this faulty and send alarm, there are two settings:
770 +)))
635 635  
636 -Example:
772 +* (((
773 +(% style="color:#4f81bd" %)**Stop Duration: Unit: Second**
774 +)))
637 637  
638 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
776 +(((
777 +Default: 15s, If SW3L didn't see any water flow in 15s, SW3L will consider stop of water flow event.
778 +)))
639 639  
640 -* (% style="color:blue" %)**Downlink Payload:**
780 +* (((
781 +(% style="color:#4f81bd" %)**Alarm Timer: Units: Minute; Default 0 minutes (means Alarm disable)**
782 +)))
641 641  
642 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
784 +(((
785 +**Example:** 3 minutes, if SW3L detect a start of water flow event and didn't detect a stop event within Alarm timer, SW3L will send an Alarm to indicate a water flow abnormal alarm.
786 +)))
643 643  
644 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
788 +(((
789 +So for example, If we set stop duration=15s and Alarm Timer=3minutes. If the toilet water flow continuously for more than 3 minutes, Sensor will send an alarm (in Confirmed MODE) to platform.
790 +)))
645 645  
792 +(((
793 +(% style="color:red" %)**Note:** **After this alarm is send, sensor will consider a stop of water flow and count for another new event. So if water flow waste last for 1 hour, Sensor will keep sending alarm every 3 minutes.**
794 +)))
646 646  
647 -=== 3.3.4 Set Humidity Alarm Threshold ===
796 +(((
797 +(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
798 +)))
648 648  
800 +* (((
801 +AT+PTRIG=15,3  ~-~-> Set Stop duration: 15s, Alarm Timer: 3 minutes.
802 +)))
649 649  
650 -* (% style="color:blue" %)**AT Command:**
804 +* (((
805 +AT+ PTRIG=15,0  ~-~-> Default Value, disable water waste Alarm.
806 +)))
651 651  
652 -(% style="color:#037691" %)**AT+SHHUM=min,max**
808 +(((
809 +(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure: 
810 +)))
653 653  
654 -* When min=0, and max≠0, Alarm higher than max
655 -* When min≠0, and max=0, Alarm lower than min
656 -* When min≠0 and max≠0, Alarm higher than max or lower than min
812 +(((
813 +Command: **0xAA aa bb cc**
814 +)))
657 657  
658 -Example:
816 +(((
817 +AA: Command Type Code
818 +)))
659 659  
660 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
820 +(((
821 +aa: Stop duration
822 +)))
661 661  
662 -* (% style="color:blue" %)**Downlink Payload:**
824 +(((
825 +bb cc: Alarm Timer
826 +)))
663 663  
664 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
828 +(((
829 +If user send 0xAA 0F 00 03: equal to AT+PTRIG=15,3
830 +)))
665 665  
666 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
667 667  
833 +=== 3.3.5 Clear Flash Record ===
668 668  
669 -=== 3.3.5 Set Alarm Interval ===
670 670  
836 +Feature: Clear flash storage for data log feature.
671 671  
672 -The shortest time of two Alarm packet. (unit: min)
838 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
673 673  
674 -* (% style="color:blue" %)**AT Command:**
840 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
841 +|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
842 +|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
675 675  
676 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
844 +(((
845 +(% style="color:blue" %)**Downlink Command:**
846 +)))
677 677  
678 -* (% style="color:blue" %)**Downlink Payload:**
848 +(((
849 +* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
850 +)))
679 679  
680 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
681 681  
682 682  
683 -=== 3.3.6 Get Alarm settings ===
854 +=== 3.3.6 Set the calculate flag ===
684 684  
685 685  
686 -Send a LoRaWAN downlink to ask device send Alarm settings.
857 +Feature: Set the calculate flag
687 687  
688 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
859 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
689 689  
690 -**Example:**
861 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
862 +|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
863 +|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
864 +|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
691 691  
692 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
866 +(% style="color:blue" %)**Downlink Command:**
693 693  
868 +* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
694 694  
695 -**Explain:**
696 696  
697 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
871 +=== 3.3.7 Set count number ===
698 698  
699 -=== 3.3.7 Set Interrupt Mode ===
700 700  
874 +Feature: Manually set the count number
701 701  
876 +(% style="color:blue" %)**AT Command: AT+SETCNT**
877 +
878 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
879 +|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
880 +|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
881 +|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
882 +
883 +(% style="color:blue" %)**Downlink Command:**
884 +
885 +* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
886 +
887 +* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
888 +
889 +
890 +
891 +
892 +
893 +
894 +=== 3.3.8 Set Interrupt Mode ===
895 +
896 +
702 702  Feature, Set Interrupt mode for PA8 of pin.
703 703  
704 704  When AT+INTMOD=0 is set, PA8 is used as a digital input port.
... ... @@ -706,7 +706,7 @@
706 706  (% style="color:blue" %)**AT Command: AT+INTMOD**
707 707  
708 708  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
709 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
904 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
710 710  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
711 711  0
712 712  OK
... ... @@ -727,40 +727,35 @@
727 727  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
728 728  
729 729  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
925 +
730 730  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
731 731  
732 -=== 3.3.8 Set Power Output Duration ===
733 733  
734 734  
735 -Control the output duration 5V . Before each sampling, device will
736 736  
737 -~1. first enable the power output to external sensor,
931 +=== 3.3.9 Set work mode ===
738 738  
739 -2. keep it on as per duration, read sensor value and construct uplink payload
740 740  
741 -3. final, close the power output.
934 +Feature: Manually set the work mode
742 742  
743 -(% style="color:blue" %)**AT Command: AT+5VT**
744 744  
745 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
746 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
747 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
748 -OK
749 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
937 +(% style="color:blue" %)**AT Command: AT+MOD**
750 750  
751 -(% style="color:blue" %)**Downlink Command: 0x07**
939 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:463px" %)
940 +|=(% style="width: 162px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 108px;background-color:#D9E2F3;color:#0070C0" %)**Response**
941 +|(% style="width:162px" %)AT+MOD=0|(% style="width:191px" %)Set the work mode to 0.|(% style="width:106px" %)OK
942 +|(% style="width:162px" %)AT+MOD=1|(% style="width:191px" %)Set the work mode to 1|(% style="width:106px" %)OK
752 752  
753 -Format: Command Code (0x07) followed by 2 bytes.
944 +(% style="color:blue" %)**Downlink Command:**
754 754  
755 -The first and second bytes are the time to turn on.
946 +* **Example: **0x0A00  ~/~/  Same as AT+MOD=0
756 756  
757 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
758 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
948 +* **Example:** 0x0A01  ~/~/  Same as AT+MOD=1
759 759  
760 760  = 4. Battery & Power Consumption =
761 761  
762 762  
763 -S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
953 +CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
764 764  
765 765  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
766 766  
... ... @@ -769,30 +769,36 @@
769 769  
770 770  
771 771  (% class="wikigeneratedid" %)
772 -User can change firmware S31x-LB to:
962 +User can change firmware CPL03-LB to:
773 773  
774 774  * Change Frequency band/ region.
965 +
775 775  * Update with new features.
967 +
776 776  * Fix bugs.
777 777  
778 778  Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
779 779  
780 -
781 781  Methods to Update Firmware:
782 782  
783 783  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
975 +
784 784  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
785 785  
786 786  = 6. FAQ =
787 787  
980 +== 6.1  AT Commands input doesn't work ==
788 788  
789 789  
983 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
984 +
985 +
790 790  = 7. Order Info =
791 791  
792 792  
793 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
989 +Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
794 794  
795 -(% style="color:red" %)**XX**(%%): The default frequency band
991 +(% style="color:red" %)**XXX**(%%): The default frequency band
796 796  
797 797  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
798 798  
... ... @@ -815,7 +815,7 @@
815 815  
816 816  (% style="color:#037691" %)**Package Includes**:
817 817  
818 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
1014 +* CPL03-LB LoRaWAN Pulse/Contact Sensor
819 819  
820 820  (% style="color:#037691" %)**Dimension and weight**:
821 821  
image-20230524105747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +223.2 KB
Content
image-20230524110125-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +194.1 KB
Content
image-20230524110211-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20230524114302-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
image-20230524114654-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.8 KB
Content
image-20230524114826-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +82.3 KB
Content
image-20230524144422-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.9 KB
Content
image-20230524144456-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.9 KB
Content
image-20230527093155-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.3 KB
Content
image-20230527093214-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20230530084138-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20230530084608-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20230530111051-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20230530111412-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
image-20230530135919-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.6 KB
Content
image-20230530135929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.6 KB
Content
image-20230530140053-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.3 MB
Content