Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 13 added, 0 removed)
  • image-20230524105433-1.png
  • image-20230524105747-2.png
  • image-20230524110125-3.png
  • image-20230524110211-4.png
  • image-20230524114302-1.png
  • image-20230524114654-2.png
  • image-20230524114826-3.png
  • image-20230524144422-1.png
  • image-20230524144456-2.png
  • image-20230527093155-1.jpeg
  • image-20230527093214-2.jpeg
  • image-20230530084138-1.jpeg
  • image-20230530084608-2.jpeg

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
	1	+CPL03-LB -- LoRaWAN Pulse/Contact Sensor User Manual

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Saxer
	1	+XWiki.Xiaoling

Content

...	...	@@ -1,9 +1,7 @@
1	1	(% style="text-align:center" %)
2		-[[image:S31-B.jpg]]
	2	+[[image:image-20230530084608-2.jpeg||height="707" width="707"]]
3	3
4	4
5		-
6		-
7	7	**Table of Contents：**
8	8
9	9	{{toc/}}
...	...	@@ -15,36 +15,40 @@
15	15
16	16	= 1. Introduction =
17	17
18		-== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
	16	+== 1.1 What is CPL03-LB LoRaWAN Pulse/Contact Sensor ==
19	19
20	20
21		-The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
	19	+The Dragino CPL03-LB is a (% style="color:blue" %)**LoRaWAN Contact Sensor**(%%) for Internet of Things solution. It detects dry contact status, open time, open counts, and then upload to IoT server via LoRaWAN wireless protocol.
22	22
23		-The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
	21	+The CPL03-LB will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
24	24
25		-The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	23	+The LoRa wireless technology used in CPL03-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26	26
27		-S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
	25	+CPL03-LB (% style="color:blue" %)**supports open alarm feature**(%%), user can set open alarm for instant notice. CPL03-LB (% style="color:blue" %)**supports Datalog feature**(%%), it can save the data when there is no LoRaWAN network and uplink when network recover.
28	28
29		-S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
	27	+CPL03-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
30	30
31		-S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	29	+CPL03-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
32	32
33		-Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	31	+CPL03-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
34	34
	33	+Each CPL03-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
35	35
	35	+
36	36	== 1.2 ​Features ==
37	37
38	38
39	39	* LoRaWAN 1.0.3 Class A
	40	+* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
40	40	* Ultra-low power consumption
41		-* External 3 meters SHT31 probe (For S31-LB)
42		-* Measure range -55°C ~~ 125°C
	42	+* Open/Close detect
	43	+* Open/Close statistics
43	43	* Temperature & Humidity alarm
44		-* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	45	+* supports open alarm feature
	46	+* supports Datalog feature
45	45	* Support Bluetooth v5.1 and LoRaWAN remote configure
46	46	* Support wireless OTA update firmware
47		-* Uplink on periodically
	49	+* Uplink on periodically and open/close event
48	48	* Downlink to change configure
49	49	* 8500mAh Battery for long term use
50	50
...	...	@@ -56,20 +56,6 @@
56	56	* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
57	57	* Operating Temperature: -40 ~~ 85°C
58	58
59		-(% style="color:#037691" %)**Temperature Sensor:**
60		-
61		-* Range: -40 to + 80°C
62		-* Accuracy: ±0.2 @ 0-90 °C
63		-* Resolution: 0.1°C
64		-* Long Term Shift: <0.03 °C/yr
65		-
66		-(% style="color:#037691" %)**Humidity Sensor: **
67		-
68		-* Range: 0 ~~ 99.9% RH
69		-* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
70		-* Resolution: 0.01% RH
71		-* Long Term Shift: <0.25 %RH/yr
72		-
73	73	(% style="color:#037691" %)**LoRa Spec:**
74	74
75	75	* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
...	...	@@ -90,9 +90,16 @@
90	90	* Sleep Mode: 5uA @ 3.3v
91	91	* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
92	92
93		-== 1.4 Sleep mode and working mode ==
	81	+== 1.4 Applications ==
94	94
95	95
	84	+* Open/Close Detection
	85	+* Pulse meter application
	86	+* Dry Contact Detection
	87	+
	88	+== 1.5 Sleep mode and working mode ==
	89	+
	90	+
96	96	(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97	97
98	98	(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
...	...	@@ -120,7 +120,7 @@
120	120	== 1.6 BLE connection ==
121	121
122	122
123		-S31x-LB support BLE remote configure.
	118	+CPL03-LB support BLE remote configure.
124	124
125	125
126	126	BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
...	...	@@ -137,35 +137,9 @@
137	137	[[image:image-20230523174230-1.png]]
138	138
139	139
140		-== 1.8  Hardware Variant ==
	135	+== 1.8 Mechanical ==
141	141
142	142
143		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
144		-|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
145		-|(% style="width:102px" %)(((
146		-S31-LB
147		-)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
148		-1 x SHT31 Probe
149		-
150		-Cable Length : 2 meters
151		-
152		-
153		-)))
154		-|(% style="width:102px" %)(((
155		-S31B-LB
156		-)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
157		-1 x SHT31 Probe
158		-
159		-Installed in device.
160		-)))
161		-
162		-(% style="display:none" %)
163		-
164		-
165		-
166		-== 1.9 Mechanical ==
167		-
168		-
169	169	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
170	170
171	171
...	...	@@ -175,12 +175,12 @@
175	175	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
176	176
177	177
178		-= 2. Configure S31x-LB to connect to LoRaWAN network =
	147	+= 2. Configure CPL03-LB to connect to LoRaWAN network =
179	179
180	180	== 2.1 How it works ==
181	181
182	182
183		-The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	152	+The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
184	184
185	185
186	186	== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
...	...	@@ -188,12 +188,12 @@
188	188
189	189	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
190	190
191		-The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	160	+The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192	192
193	193
194		-(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
	163	+(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
195	195
196		-Each S31x-LB is shipped with a sticker with the default device EUI as below:
	165	+Each CPL03-LB is shipped with a sticker with the default device EUI as below:
197	197
198	198	[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
199	199
...	...	@@ -222,10 +222,10 @@
222	222	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
223	223
224	224
225		-(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
	194	+(% style="color:blue" %)**Step 2:**(%%) Activate on CPL03-LB
226	226
227	227
228		-Press the button for 5 seconds to activate the S31x-LB.
	197	+Press the button for 5 seconds to activate the CPL03-LB.
229	229
230	230	(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
231	231
...	...	@@ -237,7 +237,7 @@
237	237	=== 2.3.1 Device Status, FPORT~=5 ===
238	238
239	239
240		-Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
	209	+Users can use the downlink command(**0x26 01**) to ask CPL03-LB to send device configure detail, include device configure status. CPL03-LB will uplink a payload via FPort=5 to server.
241	241
242	242	The Payload format is as below.
243	243
...	...	@@ -249,10 +249,10 @@
249	249
250	250	Example parse in TTNv3
251	251
252		-[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
	221	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652859749264-179.png?width=723&height=275&rev=1.1||alt="1652859749264-179.png"]]
253	253
254	254
255		-(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
	224	+(% style="color:#037691" %)**Sensor Model**(%%): For CPL03-LB, this value is 0x0A
256	256
257	257	(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
258	258
...	...	@@ -305,229 +305,466 @@
305	305	Ex2: 0x0B49 = 2889mV
306	306
307	307
308		-=== 2.3.2  Sensor Data. FPORT~=2 ===
	277	+=== 2.3.2 Sensor Configuration, FPORT~=4 ===
309	309
310	310
311		-Sensor Data is uplink via FPORT=2
	280	+CPL01 will only send this command after getting the downlink command (0x26 02) from the server.
312	312
313		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
314		-|=(% style="width: 90px;background-color:#D9E2F3" %)(((
315		-**Size(bytes)**
316		-)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
317		-|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
318		-[[Battery>>||anchor="HBattery"]]
319		-)))|(% style="width:130px" %)(((
320		-[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
321		-)))|(% style="width:91px" %)(((
322		-[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
323		-)))|(% style="width:103px" %)(((
324		-[[Temperature>>||anchor="HTemperature"]]
325		-)))|(% style="width:80px" %)(((
326		-[[Humidity>>||anchor="HHumidity"]]
	282	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	283	+|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
	284	+|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**|(% style="width:158px" %)**1**
	285	+|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: sec)|(% style="width:158px" %)Trigger mode
	286	+
	287	+* (((
	288	+(% style="color:#037691" %)** TDC: (default: 0x001C20)**
327	327	)))
328	328
329		-==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
	291	+(((
	292	+Uplink interval for the total pulse count, default value is 0x001C20 which is 7200 seconds = 2 hours.
330	330
331		-Sensor Battery Level.
	294	+
	295	+)))
332	332
333		-Ex1: 0x0B45 = 2885mV
	297	+* (((
	298	+(% style="color:#037691" %)** Disalarm: (default: 0)**
	299	+)))
334	334
335		-Ex2: 0x0B49 = 2889mV
	301	+(((
	302	+(% style="color:blue" %)** If Disalarm = 1**(%%), CPL01 will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
	303	+)))
336	336
	305	+(((
	306	+(% style="color:blue" %)** If Disalarm = 0**(%%), CPL01 will send uplink at every TDC periodically.
337	337
	308	+
	309	+)))
338	338
339		-==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
	311	+* (((
	312	+(% style="color:#037691" %)** Keep Status & Keep Time**
	313	+)))
340	340
341		-**Example**:
	315	+(((
	316	+Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.5AlarmBaseonTimeout"]]
342	342
343		-If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
	318	+
	319	+)))
344	344
345		-If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
	321	+* (((
	322	+(% style="color:#037691" %)** Trigger mode (default: 0)**
	323	+)))
346	346
347		-（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
	325	+(((
	326	+(% style="color:blue" %)** If Trigger mode = 0**(%%), count close to open event.
	327	+)))
348	348
	329	+(((
	330	+(% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
	331	+)))
349	349
350		-==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
	333	+[[image:1652860064987-743.png||height="152" width="730"]]
351	351
352	352
353		-Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
	336	+[[image:1652860079526-831.png||height="209" width="729"]]
354	354
355	355
356		-==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag& MOD**(%%) ====
	339	+=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
357	357
358	358
359		-**Example:**
	342	+(((
	343	+(((
	344	+CPL01 will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL01 will:
	345	+)))
	346	+)))
360	360
361		-If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
	348	+(((
	349	+(((
	350	+periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].
	351	+)))
	352	+)))
362	362
363		-If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
	354	+(((
	355	+(((
	356	+Uplink Payload totals 11 bytes.
	357	+)))
	358	+)))
364	364
365		-If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
	360	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
	361	+|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
	362	+|(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
	363	+|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]
366	366
367		-If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
	365	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
	366	+|=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
	367	+|(% style="width:60px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:228px" %)**1**|(% style="width:146px" %)**1**
	368	+|(% style="width:76px" %)Value|(% style="width:80px" %)Calculate Flag|(% style="width:208px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:136px" %)Contact Status: 0: Open, 1: Close
368	368
	370	+* (((
	371	+(% style="color:#037691" %)** Calculate Flag**
	372	+)))
369	369
370		-== 2.4 Payload Decoder file ==
	374	+(((
	375	+The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
	376	+)))
371	371
	378	+(((
	379	+User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
	380	+)))
372	372
373		-In TTN, use can add a custom payload so it shows friendly reading
	382	+(((
	383	+Default value: 0.
	384	+)))
374	374
375		-In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
	386	+(((
	387	+Range (6 bits): (b)000000 ~~ (b) 111111
	388	+)))
376	376
377		-[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
	390	+(((
	391	+Refer: [[Set Calculate Flag>>||anchor="H3.9Setthecalculateflag"]]
378	378
	393	+
	394	+)))
379	379
380		-== 2.5 Datalog Feature ==
	396	+* (((
	397	+(% style="color:#037691" %)** Alarm**
	398	+)))
381	381
	400	+(((
	401	+See [[Alarm Base on Timeout>>||anchor="H3.5AlarmBaseonTimeout"]]
382	382
383		-Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
	403	+
	404	+)))
384	384
	406	+* (((
	407	+(% style="color:#037691" %)** Contact Status**
	408	+)))
385	385
386		-=== 2.5.1 Ways to get datalog via LoRaWAN ===
	410	+(((
	411	+0: Open
	412	+)))
387	387
	414	+(((
	415	+1: Close
388	388
389		-Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
	417	+
	418	+)))
390	390
391	391	* (((
392		-a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
	421	+(% style="color:#037691" %)** Total pulse**
393	393	)))
	423	+
	424	+(((
	425	+Total pulse/counting base on dry [[contact trigger event>>||anchor="H2.3.2SensorConfiguration2CFPORT3D4"]]
	426	+)))
	427	+
	428	+(((
	429	+Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
	430	+
	431	+
	432	+)))
	433	+
394	394	* (((
395		-b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
	435	+(% style="color:#037691" %)** The last open duration**
396	396	)))
397	397
398		-Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
	438	+(((
	439	+Dry Contact last open duration.
	440	+)))
399	399
400		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
	442	+(((
	443	+Unit: min.
	444	+)))
401	401
	446	+[[image:1652860403792-491.png||height="153" width="735"]]
402	402
403		-=== 2.5.2 Unix TimeStamp ===
404	404
	449	+=== 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
405	405
406		-S31x-LB uses Unix TimeStamp format based on
407	407
408		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
	452	+(% style="color:red" %)**Note:**
409	409
410		-User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
	454	+* Firmware support for this mode is not released. If users want to test, please contact Dragino support.
	455	+* Users need to run (% style="color:blue" %)**AT+MOD=3**(%%) to support this model after updating the firmware.
	456	+* This mode doesn't support Historical Events and Datalog features.
411	411
412		-Below is the converter example
	458	+(% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
413	413
414		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
	460	+[[image:image-20221013153352-1.png||height="628" width="720"]]
415	415
416	416
417		-So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
	463	+(% style="color:blue" %)**Payload:**
418	418
	465	+[[image:image-20221013153352-2.png||height="167" width="1215"]]
419	419
420		-=== 2.5.3 Set Device Time ===
421	421
	468	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
	469	+|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:61px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**3**
	470	+|(% style="width:93px" %)Value|(% style="width:59px" %)Status|(% style="width:98px" %)(((
	471	+Port1 Total Pulse(PB14)
	472	+)))|(% style="width:96px" %)(((
	473	+Port2 Total Pulse(PB15)
	474	+)))|(% style="width:94px" %)(((
	475	+Port3 Total Pulse(PA4)
	476	+)))
422	422
423		-User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
	478	+(% style="color:blue" %)**Status:**
424	424
425		-Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	480	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:257px" %)
	481	+|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**6**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**
	482	+|(% style="width:75px" %)Value|(% style="width:111px" %)Calculate Flag|(% style="width:68px" %)Reserve
426	426
427		-(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
	484	+(% style="color:red" %)**Max COUNT for each port is 16777215. Exceed this number will reset to 1.**
428	428
429	429
430		-=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
	487	+(% style="color:blue" %)**Related AT Command:**
431	431
	489	+(% style="color:#037691" %)**AT+TTRMOD1:  Port1 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
432	432
433		-The Datalog uplinks will use below payload format.
	491	+ AT+TTRMOD1=0  Downlink Command: 0xA4 01 00
434	434
435		-**Retrieval data payload:**
	493	+ AT+TTRMOD1=1  Downlink Command: 0xA4 01 01
436	436
437		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
438		-|=(% style="width: 80px;background-color:#D9E2F3" %)(((
439		-**Size(bytes)**
440		-)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
441		-|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
442		-Temp_Black
443		-)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
444	444
445		-**Poll message flag & Ext:**
	496	+(% style="color:#037691" %)**AT+TTRMOD2:  Port2 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
446	446
447		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
	498	+ AT+TTRMOD1=0  Downlink Command: 0xA4 02 00
448	448
449		-**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
	500	+ AT+TTRMOD1=1  Downlink Command: 0xA4 02 01
450	450
451		-**Poll Message Flag**: 1: This message is a poll message reply.
452	452
453		-* Poll Message Flag is set to 1.
	503	+(% style="color:#037691" %)**AT+TTRMOD3:  Port3 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
454	454
455		-* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
	505	+ AT+TTRMOD1=0  Downlink Command: 0xA4 03 00
456	456
457		-For example, in US915 band, the max payload for different DR is:
	507	+ AT+TTRMOD1=1  Downlink Command: 0xA4 03 01
458	458
459		-**a) DR0:** max is 11 bytes so one entry of data
460	460
461		-**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
	510	+(% style="color:#037691" %)**AT+CALCFLAG:  Calculate Flag ( Default : 0 )**
462	462
463		-**c) DR2:** total payload includes 11 entries of data
	512	+ AT+CALCFLAG=aa
464	464
465		-**d) DR3: **total payload includes 22 entries of data.
466	466
467		-If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
	515	+(% style="color:blue" %)**Downlink Command: 0xA5 aa**
468	468
	517	+(% style="color:#037691" %)**AT+COUNTMOD:  Accumulative Mode;  0: Accumulative (Default),1: Reset after uplink.**
469	469
470		-**Example:**
	519	+ AT+COUNTMOD=0 Downlink Command: 0x0B 00
471	471
472		-If S31x-LB has below data inside Flash:
	521	+ AT+COUNTMOD=1 Downlink Command: 0x0B 01
473	473
474		-[[image:1682646494051-944.png]]
475	475
476		-If user sends below downlink command: 3160065F9760066DA705
	524	+(% style="color:#037691" %)**AT+SETCNT:  Set count value**
477	477
478		-Where : Start time: 60065F97 = time 21/1/19 04:27:03
	526	+ AT+SETCNT=1,aa  Downlink Command: 0xA6 01 aa aa aa
479	479
480		- Stop time: 60066DA7= time 21/1/19 05:27:03
	528	+ AT+SETCNT=2,aa  Downlink Command: 0xA6 02 aa aa aa
481	481
	530	+ AT+SETCNT=3,aa  Downlink Command: 0xA6 03 aa aa aa
482	482
483		-**S31x-LB will uplink this payload.**
484	484
485		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
	533	+(% style="color:blue" %)**Decode:  **(%%)[[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
486	486
	535	+
	536	+=== 2.3.5 Historical Door Open/Close Event, FPORT~=3 ===
	537	+
	538	+
487	487	(((
488		-__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
	540	+CPL01 stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
489	489	)))
490	490
491	491	(((
492		-Where the first 11 bytes is for the first entry:
	544	+The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
493	493	)))
494	494
	547	+* (((
	548	+Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL01 will send max bytes according to the current DR and Frequency bands.
	549	+)))
	550	+
495	495	(((
496		-7FFF089801464160065F97
	552	+For example, in the US915 band, the max payload for different DR is:
497	497	)))
498	498
499	499	(((
500		-**Ext sensor data**=0x7FFF/100=327.67
	556	+a) (% style="color:blue" %)**DR0**(%%): max is 11 bytes so one entry of data
501	501	)))
502	502
503	503	(((
504		-**Temp**=0x088E/100=22.00
	560	+b) (% style="color:blue" %)**DR1**(%%): max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
505	505	)))
506	506
507	507	(((
508		-**Hum**=0x014B/10=32.6
	564	+c) (% style="color:blue" %)**DR2**(%%): total payload includes 11 entries of data
509	509	)))
510	510
511	511	(((
512		-**poll message flag & Ext**=0x41,means reply data,Ext=1
	568	+d) (% style="color:blue" %)**DR3**(%%): total payload includes 22 entries of data.
513	513	)))
514	514
515	515	(((
516		-**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
	572	+If CPL01 doesn't have any data in the polling time. It will uplink 11 bytes of 0
	573	+
	574	+
517	517	)))
518	518
	577	+(% style="color:blue" %)** Downlink:**
519	519
520		-(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
	579	+(% class="box" %)
	580	+(((
	581	+**0x31 61 E9 3A D4 61 E9 3D E0 05**
	582	+)))
521	521
522		-== 2.6 Temperature Alarm Feature ==
	584	+[[image:1652861353248-624.png||height="189" width="720"]]
523	523
524	524
525		-S31x-LB work flow with Alarm feature.
	587	+(% style="color:blue" %)** Uplink:**
526	526
	589	+(% class="box" %)
	590	+(((
	591	+**0E 00 23 E6 00 00 00 61 E9 3B 04 0E 00 23 E6 00 00 00 61 E9 3B 25 0D 00 00 00 00 00 00 61 E9 3B C8 0E 00 00 02 00 00 00 61 E9 3B D4 0E 00 00 06 00 00 00 61 E9 3B DB 01 00 00 00 00 00 00 61 E9 3C 91 01 00 00 00 00 00 00 61 E9 3C A1 0D 00 00 00 00 00 00 61 E9 3C BC 0E 00 00 07 00 00 00 61 E9 3C D6 00 00 00 00 00 00 00 61 E9 3D A6**
	592	+)))
527	527
528		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
	594	+(% style="color:#037691" %)** **
529	529
	596	+(% style="color:#037691" %)**Parsed Value:**
530	530
	598	+(((
	599	+[ALARM, PIN_STATUS, TOTAL_PULSE, CALCULATE_FLAG, LAST_OPEN_DURATION, TIME]
	600	+)))
	601	+
	602	+(((
	603	+
	604	+)))
	605	+
	606	+(((
	607	+[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:35:48],
	608	+)))
	609	+
	610	+(((
	611	+[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:36:21],
	612	+)))
	613	+
	614	+(((
	615	+[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:39:04],
	616	+)))
	617	+
	618	+(((
	619	+[TRUE, CLOSE, 2, 3, 0, 2022-01-20 10:39:16],
	620	+)))
	621	+
	622	+(((
	623	+[TRUE, CLOSE, 6, 3, 0, 2022-01-20 10:39:23],
	624	+)))
	625	+
	626	+(((
	627	+[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:25],
	628	+)))
	629	+
	630	+(((
	631	+[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:41],
	632	+)))
	633	+
	634	+(((
	635	+[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:43:08],
	636	+)))
	637	+
	638	+(((
	639	+[TRUE, CLOSE, 7, 3, 0, 2022-01-20 10:43:34],
	640	+)))
	641	+
	642	+(((
	643	+[FALSE, CLOSE, 0, 0, 0, 2022-01-20 10:47:02],
	644	+
	645	+
	646	+)))
	647	+
	648	+[[image:1652861480446-216.png]]
	649	+
	650	+
	651	+== 2.4 Payload Decoder file ==
	652	+
	653	+
	654	+In TTN, use can add a custom payload so it shows friendly reading
	655	+
	656	+In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
	657	+
	658	+
	659	+== 2.5 Datalog Feature ==
	660	+
	661	+
	662	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
	663	+
	664	+
	665	+=== 2.5.1 Ways to get datalog via LoRaWAN ===
	666	+
	667	+
	668	+Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
	669	+
	670	+* (((
	671	+a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
	672	+)))
	673	+* (((
	674	+b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
	675	+)))
	676	+
	677	+Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
	678	+
	679	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
	680	+
	681	+
	682	+=== 2.5.2 Unix TimeStamp ===
	683	+
	684	+
	685	+S31x-LB uses Unix TimeStamp format based on
	686	+
	687	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
	688	+
	689	+User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
	690	+
	691	+Below is the converter example
	692	+
	693	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
	694	+
	695	+
	696	+So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
	697	+
	698	+
	699	+=== 2.5.3 Set Device Time ===
	700	+
	701	+
	702	+User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
	703	+
	704	+Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	705	+
	706	+(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
	707	+
	708	+
	709	+
	710	+=== 2.5.4 Poll sensor value ===
	711	+
	712	+
	713	+Users can poll sensor values based on timestamps. Below is the downlink command.
	714	+
	715	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
	716	+|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
	717	+|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
	718	+|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
	719	+
	720	+(((
	721	+Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
	722	+)))
	723	+
	724	+(((
	725	+For example, downlink command[[image:image-20220518162852-1.png]]
	726	+)))
	727	+
	728	+(((
	729	+Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
	730	+)))
	731	+
	732	+(((
	733	+Uplink Internal =5s，means CPL01 will send one packet every 5s. range 5~~255s.
	734	+)))
	735	+
	736	+
531	531	== 2.7 Frequency Plans ==
532	532
533	533
...	...	@@ -560,21 +560,27 @@
560	560	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
561	561
562	562
563		-== 3.3 Commands special design for S31x-LB ==
	769	+== 3.3 Commands special design for CPL03-LB ==
564	564
565	565
566		-These commands only valid for S31x-LB, as below:
	772	+These commands only valid for CPL03-LB, as below:
567	567
568	568
569	569	=== 3.3.1 Set Transmit Interval Time ===
570	570
571	571
	778	+(((
572	572	Feature: Change LoRaWAN End Node Transmit Interval.
573	573
	781	+
	782	+)))
	783	+
	784	+(((
574	574	(% style="color:blue" %)**AT Command: AT+TDC**
	786	+)))
575	575
576	576	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
577		-|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
	789	+|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
578	578	|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
579	579	30000
580	580	OK
...	...	@@ -585,18 +585,48 @@
585	585	Set transmit interval to 60000ms = 60 seconds
586	586	)))
587	587
	800	+(((
588	588	(% style="color:blue" %)**Downlink Command: 0x01**
	802	+)))
589	589
	804	+(((
590	590	Format: Command Code (0x01) followed by 3 bytes time value.
	806	+)))
591	591
	808	+(((
592	592	If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	810	+)))
593	593
594		-* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
595		-* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
	812	+* (((
	813	+Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
	814	+)))
	815	+* (((
	816	+Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
596	596
597		-=== 3.3.2 Get Device Status ===
598	598
	819	+
	820	+)))
599	599
	822	+
	823	+=== 3.3.2 Quit AT Command ===
	824	+
	825	+
	826	+Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
	827	+
	828	+(% style="color:blue" %)**AT Command: AT+DISAT**
	829	+
	830	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
	831	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	832	+|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
	833	+
	834	+(% style="color:blue" %)**Downlink Command:**
	835	+
	836	+No downlink command for this feature.
	837	+
	838	+
	839	+=== 3.3.3 Get Device Status ===
	840	+
	841	+
600	600	Send a LoRaWAN downlink to ask device send Alarm settings.
601	601
602	602	(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
...	...	@@ -604,89 +604,260 @@
604	604	Sensor will upload Device Status via FPORT=5. See payload section for detail.
605	605
606	606
607		-=== 3.3.3 Set Temperature Alarm Threshold ===
	849	+=== 3.3.4 Enable / Disable Alarm ===
608	608
609	609
610		-* (% style="color:blue" %)**AT Command:**
	852	+Feature: Enable/Disable Alarm for open/close event. Default value 0.
611	611
612		-(% style="color:#037691" %)**AT+SHTEMP=min,max**
	854	+(% style="color:blue" %)**AT Command:**
613	613
614		-* When min=0, and max≠0, Alarm higher than max
615		-* When min≠0, and max=0, Alarm lower than min
616		-* When min≠0 and max≠0, Alarm higher than max or lower than min
	856	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
	857	+|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
	858	+|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
	859	+|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
617	617
618		-Example:
	861	+(% style="color:blue" %)**Downlink Command:**
619	619
620		- AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
	863	+**0xA7 01**  ~/~/  Same As AT+DISALARM=1
621	621
622		-* (% style="color:blue" %)**Downlink Payload:**
	865	+**0xA7 00    ** ~/~/  Same As AT+DISALARM=0
623	623
624		-(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
	867	+(% style="color:red" %)**Notice, This command requires setting CPL01 to LDS03A Mode first. See **(%%)**"(% style="color:blue" %)3.7 Set the sensor mode"(%%)**
625	625
626		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
627	627
	870	+=== 3.3.5 Alarm Base on Timeout ===
628	628
629		-=== 3.3.4 Set Humidity Alarm Threshold ===
630	630
	873	+(((
	874	+(((
	875	+CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
631	631
632		-* (% style="color:blue" %)**AT Command:**
	877	+
	878	+)))
	879	+)))
633	633
634		-(% style="color:#037691" %)**AT+SHHUM=min,max**
	881	+(((
	882	+(((
	883	+(% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
	884	+)))
	885	+)))
635	635
636		-* When min=0, and max≠0, Alarm higher than max
637		-* When min≠0, and max=0, Alarm lower than min
638		-* When min≠0 and max≠0, Alarm higher than max or lower than min
	887	+(((
	888	+(((
	889	+Keep Status = 1: Monitor Close to Open event
	890	+)))
	891	+)))
639	639
640		-Example:
	893	+(((
	894	+(((
	895	+Keep Status = 0: Monitor Open to Close event
641	641
642		- AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
	897	+
	898	+)))
	899	+)))
643	643
644		-* (% style="color:blue" %)**Downlink Payload:**
	901	+(((
	902	+(((
	903	+(% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
	904	+)))
	905	+)))
645	645
646		-(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
	907	+(((
	908	+(((
	909	+Range 0 ~~ 65535(0xFFFF) seconds.
	910	+)))
	911	+)))
647	647
648		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
	913	+(((
	914	+(((
	915	+If keep time = 0, Disable Alarm Base on Timeout feature.
	916	+)))
	917	+)))
649	649
	919	+(((
	920	+(((
	921	+If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
	922	+)))
650	650
651		-=== 3.3.5 Set Alarm Interval ===
	924	+(((
	925	+
	926	+)))
	927	+)))
652	652
	929	+(((
	930	+(((
	931	+(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
	932	+)))
653	653
654		-The shortest time of two Alarm packet. (unit: min)
	934	+(((
	935	+(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
	936	+)))
655	655
656		-* (% style="color:blue" %)**AT Command:**
	938	+(((
	939	+(% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
	940	+)))
	941	+)))
657	657
658		-(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
	943	+(((
	944	+
	945	+)))
659	659
660		-* (% style="color:blue" %)**Downlink Payload:**
	947	+(((
	948	+(((
	949	+(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
	950	+)))
661	661
662		-(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
	952	+(((
	953	+**Command: 0xA9 aa bb cc**
	954	+)))
	955	+)))
663	663
	957	+(((
	958	+(((
	959	+A9: Command Type Code
	960	+)))
	961	+)))
664	664
665		-=== 3.3.6 Get Alarm settings ===
	963	+(((
	964	+(((
	965	+aa: status to be monitored
	966	+)))
	967	+)))
666	666
	969	+(((
	970	+(((
	971	+bb cc: timeout.
	972	+)))
	973	+)))
667	667
668		-Send a LoRaWAN downlink to ask device send Alarm settings.
	975	+(((
	976	+
	977	+)))
669	669
670		-* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
	979	+(((
	980	+(((
	981	+If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
	982	+)))
	983	+)))
671	671
672		-**Example:**
	985	+(((
	986	+(((
	987	+Or
	988	+)))
	989	+)))
673	673
674		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
	991	+(((
	992	+(((
	993	+0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
	994	+)))
	995	+)))
675	675
676	676
677		-**Explain:**
	998	+=== 3.3.6 Clear Flash Record ===
678	678
679		-* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
680	680
681		-=== 3.3.7 Set Interrupt Mode ===
	1001	+Feature: Clear flash storage for data log feature.
682	682
683	683
	1004	+(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
	1005	+
	1006	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
	1007	+|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	1008	+|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
	1009	+
	1010	+(((
	1011	+(((
	1012	+(% style="color:#4f81bd" %)**Downlink Command:**
	1013	+)))
	1014	+
	1015	+(((
	1016	+* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
	1017	+)))
	1018	+)))
	1019	+
	1020	+
	1021	+
	1022	+=== 3.3.7 Set trigger mode ===
	1023	+
	1024	+
	1025	+Feature: Set the trigger interrupt mode.
	1026	+
	1027	+(% style="color:#4f81bd" %)**AT Command: AT+TTRMOD**
	1028	+
	1029	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
	1030	+|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	1031	+|(% style="width:157px" %)(((
	1032	+AT+TTRMOD=1
	1033	+)))|(% style="width:156px" %)Count and trigger from open to close (rising edge)|(% style="width:89px" %)(((
	1034	+(((
	1035	+OK
	1036	+)))
	1037	+)))
	1038	+|(% style="width:157px" %)(((
	1039	+AT+TTRMOD=0
	1040	+)))|(% style="width:156px" %)Count and trigger from close to open (falling edge)|(% style="width:89px" %)(((
	1041	+OK
	1042	+)))
	1043	+
	1044	+(% style="color:#4f81bd" %)**Downlink Command:**
	1045	+
	1046	+* **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
	1047	+
	1048	+
	1049	+
	1050	+
	1051	+
	1052	+
	1053	+=== 3.3.8 Set the calculate flag ===
	1054	+
	1055	+
	1056	+Feature: Set the calculate flag
	1057	+
	1058	+(% style="color:#4f81bd" %)**AT Command: AT+CALCFLAG**
	1059	+
	1060	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
	1061	+|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	1062	+|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
	1063	+|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
	1064	+
	1065	+(% style="color:#4f81bd" %)**Downlink Command:**
	1066	+
	1067	+* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
	1068	+
	1069	+
	1070	+
	1071	+
	1072	+=== 3.3.9 Set count number ===
	1073	+
	1074	+
	1075	+Feature: Manually set the count number
	1076	+
	1077	+(% style="color:#4f81bd" %)**AT Command: AT+SETCNT**
	1078	+
	1079	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
	1080	+|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	1081	+|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
	1082	+|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
	1083	+
	1084	+(% style="color:#4f81bd" %)**Downlink Command:**
	1085	+
	1086	+* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
	1087	+* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
	1088	+
	1089	+
	1090	+
	1091	+
	1092	+=== 3.3.10 Set Interrupt Mode ===
	1093	+
	1094	+
684	684	Feature, Set Interrupt mode for PA8 of pin.
685	685
	1097	+When AT+INTMOD=0 is set, PA8 is used as a digital input port.
	1098	+
686	686	(% style="color:blue" %)**AT Command: AT+INTMOD**
687	687
688	688	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
689		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
	1102	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
690	690	|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
691	691	0
692	692	OK
...	...	@@ -709,9 +709,14 @@
709	709	* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
710	710	* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
711	711
712		-=== 3.3.8 Set Power Output Duration ===
713	713
714	714
	1127	+
	1128	+
	1129	+
	1130	+=== 3.3.11 Set Power Output Duration ===
	1131	+
	1132	+
715	715	Control the output duration 5V . Before each sampling, device will
716	716
717	717	~1. first enable the power output to external sensor,
...	...	@@ -723,7 +723,7 @@
723	723	(% style="color:blue" %)**AT Command: AT+5VT**
724	724
725	725	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
726		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
	1144	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
727	727	|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
728	728	OK
729	729	|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK

image-20230524105433-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+121.4 KB

Content

image-20230524105747-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+223.2 KB

Content

image-20230524110125-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+194.1 KB

Content

image-20230524110211-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+110.1 KB

Content

image-20230524114302-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.0 KB

Content

image-20230524114654-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.8 KB

Content

image-20230524114826-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.3 KB

Content

image-20230524144422-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.9 KB

Content

image-20230524144456-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.9 KB

Content

image-20230527093155-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+9.3 KB

Content

image-20230527093214-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.7 KB

Content

image-20230530084138-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230530084608-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content