Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 45.1
edited by Saxer Lin
on 2023/05/24 08:55
Change comment: There is no comment for this version
To version 30.1
edited by Ellie Zhang
on 2023/05/06 14:39
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Ellie
Content
... ... @@ -4,7 +4,7 @@
4 4  
5 5  
6 6  
7 -**Table of Contents：**
7 +**目录：**
8 8  
9 9  {{toc/}}
10 10  
... ... @@ -13,29 +13,46 @@
13 13  
14 14  
15 15  
16 -= 1. Introduction =
16 += 一、简介 =
17 17  
18 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
18 +== 1.1 什么是 S31x-LB LoRaWAN 温湿度传感器 ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
21 +(((
22 +Dragino S31x-LB 是 用于物联网解决方案的(% style="color:blue" %)**LoRaWAN 温度和湿度传感器。**(%%)用于(% style="color:blue" %)**精确测量周围环境温度和相对空气湿度**(%%)，然后通过LoRaWAN无线协议上传到物联网服务器。
23 +)))
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
25 +(((
26 +S31x-LB采用的温湿度传感器为SHT31，是Sensirion的全校准、线性化、温度补偿数字输出，具有很强的可靠性和长期稳定性。SHT31 固定在(% style="color:blue" %)**防水防冷凝外壳**(%%)中，可长期使用。
27 +)))
24 24  
29 +(((
25 25  The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
31 +)))
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
33 +(((
34 +S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
35 +)))
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
37 +(((
38 +S31x-LB has max 3 probes which measure maximum 3 temperature points.
39 +)))
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
41 +(((
42 +S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 +)))
32 32  
45 +(((
46 +S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
47 +)))
48 +
49 +(((
33 33  Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 +)))
34 34  
35 35  
36 36  == 1.2 ​Features ==
37 37  
38 -
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Ultra-low power consumption
41 41  * External 3 meters SHT31 probe (For S31-LB)
... ... @@ -132,19 +132,12 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7 Pin Definitions ==
152 +== 1.7  Hardware Variant ==
136 136  
137 -[[image:image-20230523174230-1.png]]
138 138  
139 -
140 -== 1.8  Hardware Variant ==
141 -
142 -
143 143  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
144 144  |=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
145 -|(% style="width:102px" %)(((
146 -S31-LB
147 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
157 +|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
148 148  1 x SHT31 Probe
149 149  
150 150  Cable Length : 2 meters
... ... @@ -151,9 +151,7 @@
151 151  
152 152  
153 153  )))
154 -|(% style="width:102px" %)(((
155 -S31B-LB
156 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
164 +|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 157  1 x SHT31 Probe
158 158  
159 159  Installed in device.
... ... @@ -163,7 +163,7 @@
163 163  
164 164  
165 165  
166 -== 1.9 Mechanical ==
174 +== 1.8 Mechanical ==
167 167  
168 168  
169 169  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -315,18 +315,18 @@
315 315  **Size(bytes)**
316 316  )))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
317 317  |(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
318 -[[Battery>>||anchor="HBattery"]]
326 +[[Battery>>||anchor="HBattery:"]]
319 319  )))|(% style="width:130px" %)(((
320 320  [[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
321 321  )))|(% style="width:91px" %)(((
322 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
330 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
323 323  )))|(% style="width:103px" %)(((
324 -[[Temperature>>||anchor="HTemperature"]]
332 +[[Temperature>>||anchor="HTemperature:"]]
325 325  )))|(% style="width:80px" %)(((
326 -[[Humidity>>||anchor="HHumidity"]]
334 +[[Humidity>>||anchor="HHumidity:"]]
327 327  )))
328 328  
329 -==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
337 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
330 330  
331 331  Sensor Battery Level.
332 332  
... ... @@ -336,7 +336,7 @@
336 336  
337 337  
338 338  
339 -==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
347 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
340 340  
341 341  **Example**:
342 342  
... ... @@ -347,13 +347,13 @@
347 347  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
348 348  
349 349  
350 -==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
358 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
351 351  
352 352  
353 353  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
354 354  
355 355  
356 -==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag& MOD**(%%) ====
364 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
357 357  
358 358  
359 359  **Example:**
... ... @@ -374,7 +374,7 @@
374 374  
375 375  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
376 376  
377 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
385 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
378 378  
379 379  
380 380  == 2.5 Datalog Feature ==
... ... @@ -386,20 +386,15 @@
386 386  === 2.5.1 Ways to get datalog via LoRaWAN ===
387 387  
388 388  
389 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
397 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
390 390  
391 -* (((
392 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
393 -)))
394 -* (((
395 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
396 -)))
399 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
400 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
397 397  
398 398  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
399 399  
400 400  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
401 401  
402 -
403 403  === 2.5.2 Unix TimeStamp ===
404 404  
405 405  
... ... @@ -413,7 +413,6 @@
413 413  
414 414  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
415 415  
416 -
417 417  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
418 418  
419 419  
... ... @@ -439,8 +439,8 @@
439 439  **Size(bytes)**
440 440  )))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
441 441  |(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
442 -Temp_Black
443 -)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
444 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
445 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
444 444  
445 445  **Poll message flag & Ext:**
446 446  
... ... @@ -606,7 +606,6 @@
606 606  
607 607  === 3.3.3 Set Temperature Alarm Threshold ===
608 608  
609 -
610 610  * (% style="color:blue" %)**AT Command:**
611 611  
612 612  (% style="color:#037691" %)**AT+SHTEMP=min,max**
... ... @@ -628,7 +628,6 @@
628 628  
629 629  === 3.3.4 Set Humidity Alarm Threshold ===
630 630  
631 -
632 632  * (% style="color:blue" %)**AT Command:**
633 633  
634 634  (% style="color:#037691" %)**AT+SHHUM=min,max**
... ... @@ -650,7 +650,6 @@
650 650  
651 651  === 3.3.5 Set Alarm Interval ===
652 652  
653 -
654 654  The shortest time of two Alarm packet. (unit: min)
655 655  
656 656  * (% style="color:blue" %)**AT Command:**
... ... @@ -681,7 +681,7 @@
681 681  === 3.3.7 Set Interrupt Mode ===
682 682  
683 683  
684 -Feature, Set Interrupt mode for PA8 of pin.
683 +Feature, Set Interrupt mode for GPIO_EXIT.
685 685  
686 686  (% style="color:blue" %)**AT Command: AT+INTMOD**
687 687  
... ... @@ -709,34 +709,6 @@
709 709  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
710 710  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
711 711  
712 -=== 3.3.8 Set Power Output Duration ===
713 -
714 -
715 -Control the output duration 5V . Before each sampling, device will
716 -
717 -~1. first enable the power output to external sensor,
718 -
719 -2. keep it on as per duration, read sensor value and construct uplink payload
720 -
721 -3. final, close the power output.
722 -
723 -(% style="color:blue" %)**AT Command: AT+5VT**
724 -
725 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
726 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
727 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
728 -OK
729 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
730 -
731 -(% style="color:blue" %)**Downlink Command: 0x07**
732 -
733 -Format: Command Code (0x07) followed by 2 bytes.
734 -
735 -The first and second bytes are the time to turn on.
736 -
737 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
738 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
739 -
740 740  = 4. Battery & Power Consumption =
741 741  
742 742  
... ... @@ -755,61 +755,61 @@
755 755  * Update with new features.
756 756  * Fix bugs.
757 757  
758 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
729 +固件和变更日志可以从以下位置下载：**[[固件下载链接>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
759 759  
760 760  
761 -Methods to Update Firmware:
732 +更新固件的方法：
762 762  
763 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
764 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
734 +* （推荐方式）无线OTA固件更新：  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
735 +* 通过 UART TTL 接口更新。**[[指令>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**。
765 765  
766 -= 6. FAQ =
737 += 6. 常见问题 =
767 767  
768 768  
769 769  
770 -= 7. Order Info =
741 += 7. 订单信息 =
771 771  
772 772  
773 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
744 +零件号：(% style="color:blue" %)**S31-LB-XX / S31B-LB-XX**
774 774  
775 -(% style="color:red" %)**XX**(%%): The default frequency band
746 +(% style="color:red" %)**XX**(%%) : 默认频段
776 776  
777 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
748 +* (% style="color:red" %)**AS923**(%%) : LoRaWAN AS923 频段
778 778  
779 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
750 +* (% style="color:red" %)**AU915**(%%) : LoRaWAN AU915 频段
780 780  
781 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
752 +* (% style="color:red" %)**EU433**(%%) : LoRaWAN EU433 频段
782 782  
783 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
754 +* (% style="color:red" %)**EU868**(%%) : LoRaWAN EU868 频段
784 784  
785 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
756 +* (% style="color:red" %)**KR920**(%%) : LoRaWAN KR920 频段
786 786  
787 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
758 +* (% style="color:red" %)**US915**(%%) : LoRaWAN US915 频段
788 788  
789 -* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
760 +* (% style="color:red" %)**IN865**(%%) : LoRaWAN IN865 频段
790 790  
791 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
762 +* (% style="color:red" %)**CN470**(%%) : LoRaWAN CN470 频段
792 792  
793 -= 8. ​Packing Info =
764 += 8. 包装信息 =
794 794  
795 795  
796 -(% style="color:#037691" %)**Package Includes**:
767 +(% style="color:#037691" %)**套餐包括**：
797 797  
798 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
769 +* S31x-LB LoRaWAN 温湿度传感器
799 799  
800 -(% style="color:#037691" %)**Dimension and weight**:
771 +(% style="color:#037691" %)**尺寸和重量**：
801 801  
802 -* Device Size: cm
773 +* 设备尺寸：cm
803 803  
804 -* Device Weight: g
775 +* 设备重量：g
805 805  
806 -* Package Size / pcs : cm
777 +* 包装尺寸/个 : cm
807 807  
808 -* Weight / pcs : g
779 +* 重量/个：克
809 809  
810 -= 9. Support =
781 += 9.支持 =
811 811  
812 812  
813 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
784 +* 周一至周五的 09:00 至 18:00 GMT+8 提供支持。由于时区不同，我们无法提供现场支持。但是，您的问题将在上述时间表中尽快得到解答。
814 814  
815 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
786 +* 提供尽可能多的关于您的询问的信息（产品型号、准确描述您的问题和复制它的步骤等）并发送邮件至 [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
S31.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
S31B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content
image-20230523174230-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -605.9 KB
Content