Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 21 added, 0 removed)
  • image-20230524105433-1.png
  • image-20230524105747-2.png
  • image-20230524110125-3.png
  • image-20230524110211-4.png
  • image-20230524114302-1.png
  • image-20230524114654-2.png
  • image-20230524114826-3.png
  • image-20230524144422-1.png
  • image-20230524144456-2.png
  • image-20230527093155-1.jpeg
  • image-20230527093214-2.jpeg
  • image-20230530084138-1.jpeg
  • image-20230530084608-2.jpeg
  • image-20230530111051-3.png
  • image-20230530111412-4.png
  • image-20230530135919-1.png
  • image-20230530135929-2.png
  • image-20230530140053-1.jpeg
  • image-20230612170349-1.png
  • image-20230612170943-2.png
  • image-20230612171032-3.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
	1	+DDS75-LB -- LoRaWAN Distance Detection Sensor User Manual

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Saxer
	1	+XWiki.Xiaoling

Content

...	...	@@ -1,5 +1,5 @@
1	1	(% style="text-align:center" %)
2		-[[image:S31-B.jpg]]
	2	+[[image:image-20230612170349-1.png||height="656" width="656"]]
3	3
4	4
5	5
...	...	@@ -15,22 +15,22 @@
15	15
16	16	= 1. Introduction =
17	17
18		-== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
	18	+== 1.1 What is LoRaWAN Distance Detection Sensor ==
19	19
20	20
21		-The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
	21	+The Dragino DDS75-LB is a (% style="color:blue" %)** LoRaWAN Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:blue" %)** ultrasonic sensing technology**(%%) for (% style="color:blue" %)**distance measurement**(%%), and (% style="color:blue" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The DDS75-LB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
22	22
23		-The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
	23	+It detects the distance(% style="color:blue" %)**  between the measured object and the sensor**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
24	24
25		-The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	25	+The LoRa wireless technology used in SW3L-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26	26
27		-S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
	27	+SW3L-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
28	28
29		-S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
	29	+SW3L-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
30	30
31		-S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	31	+Each SW3L-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
32	32
33		-Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	33	+[[image:image-20230612170943-2.png||height="525" width="912"]]
34	34
35	35
36	36	== 1.2 ​Features ==
...	...	@@ -37,39 +37,54 @@
37	37
38	38
39	39	* LoRaWAN 1.0.3 Class A
40		-* Ultra-low power consumption
41		-* External 3 meters SHT31 probe (For S31-LB)
42		-* Measure range -55°C ~~ 125°C
43		-* Temperature & Humidity alarm
44	44	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	41	+* Ultra-low power consumption
	42	+* Distance Detection by Ultrasonic technology
	43	+* Flat object range 280mm - 7500mm
	44	+* Accuracy: ±(1cm+S*0.3%) (S: Distance)
	45	+* Cable Length : 25cm
45	45	* Support Bluetooth v5.1 and LoRaWAN remote configure
46	46	* Support wireless OTA update firmware
47		-* Uplink on periodically
	48	+* AT Commands to change parameters
48	48	* Downlink to change configure
	50	+* IP66 Waterproof Enclosure
49	49	* 8500mAh Battery for long term use
50	50
51	51	== 1.3 Specification ==
52	52
53	53
54		-(% style="color:#037691" %)**Common DC Characteristics:**
	56	+(% style="color:#037691" %)**Rated environmental conditions:**
55	55
56		-* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
57		-* Operating Temperature: -40 ~~ 85°C
	58	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
	59	+|(% style="background-color:#d9e2f3; color:#0070c0; width:163px" %)**Item**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)(((
	60	+**Minimum value**
	61	+)))|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)(((
	62	+**Typical value**
	63	+)))|(% style="background-color:#d9e2f3; color:#0070c0; width:87px" %)(((
	64	+**Maximum value**
	65	+)))|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Unit**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Remarks**
	66	+|(% style="width:174px" %)Storage temperature|(% style="width:86px" %)-25|(% style="width:66px" %)25|(% style="width:90px" %)80|(% style="width:48px" %)℃|(% style="width:203px" %)
	67	+|(% style="width:174px" %)Storage humidity|(% style="width:86px" %) |(% style="width:66px" %)65%|(% style="width:90px" %)90%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
	68	+|(% style="width:174px" %)Operating temperature|(% style="width:86px" %)-15|(% style="width:66px" %)25|(% style="width:90px" %)60|(% style="width:48px" %)℃|(% style="width:203px" %)
	69	+|(% style="width:174px" %)Working humidity|(% style="width:86px" %)(((
	70	+
58	58
59		-(% style="color:#037691" %)**Temperature Sensor:**
	72	+
	73	+)))|(% style="width:66px" %)65%|(% style="width:90px" %)80%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
60	60
61		-* Range: -40 to + 80°C
62		-* Accuracy: ±0.2 @ 0-90 °C
63		-* Resolution: 0.1°C
64		-* Long Term Shift: <0.03 °C/yr
	75	+(((
	76	+**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);       **
65	65
66		-(% style="color:#037691" %)**Humidity Sensor: **
	78	+**~ b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
67	67
68		-* Range: 0 ~~ 99.9% RH
69		-* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
70		-* Resolution: 0.01% RH
71		-* Long Term Shift: <0.25 %RH/yr
	80	+
	81	+)))
72	72
	83	+(% style="color:#037691" %)**Common DC Characteristics:**
	84	+
	85	+* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
	86	+* Operating Temperature: -40 ~~ 85°C
	87	+
73	73	(% style="color:#037691" %)**LoRa Spec:**
74	74
75	75	* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
...	...	@@ -90,15 +90,41 @@
90	90	* Sleep Mode: 5uA @ 3.3v
91	91	* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
92	92
93		-== 1.4 Sleep mode and working mode ==
	108	+== 1.4 Effective measurement range Reference beam pattern ==
94	94
95	95
	111	+**~1. The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
	112	+
	113	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852253176-749.png?rev=1.1||alt="1654852253176-749.png"]]
	114	+
	115	+
	116	+**2. The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
	117	+
	118	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852175653-550.png?rev=1.1||alt="1654852175653-550.png"]]
	119	+
	120	+
	121	+== 1.5 Applications ==
	122	+
	123	+
	124	+* Horizontal distance measurement
	125	+* Liquid level measurement
	126	+* Parking management system
	127	+* Object proximity and presence detection
	128	+* Intelligent trash can management system
	129	+* Robot obstacle avoidance
	130	+* Automatic control
	131	+* Sewer
	132	+* Bottom water level monitoring
	133	+
	134	+== 1.6 Sleep mode and working mode ==
	135	+
	136	+
96	96	(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97	97
98	98	(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
99	99
100	100
101		-== 1.5 Button & LEDs ==
	142	+== 1.7 Button & LEDs ==
102	102
103	103
104	104	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
...	...	@@ -117,10 +117,10 @@
117	117	)))
118	118	|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
119	119
120		-== 1.6 BLE connection ==
	161	+== 1.8 BLE connection ==
121	121
122	122
123		-S31x-LB support BLE remote configure.
	164	+DDS75-LB support BLE remote configure.
124	124
125	125
126	126	BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
...	...	@@ -132,57 +132,45 @@
132	132	If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133	133
134	134
135		-== 1.7 Pin Definitions ==
	176	+== 1.9 Pin Definitions ==
136	136
137	137	[[image:image-20230523174230-1.png]]
138	138
	180	+
139	139	== ==
140	140
141		-== 1.8  Hardware Variant ==
	183	+== 2.10 Mechanical ==
142	142
143	143
144		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
145		-|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
146		-|(% style="width:102px" %)(((
147		-S31-LB
148		-)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
149		-1 x SHT31 Probe
	186	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
150	150
151		-Cable Length : 2 meters
152	152
153		-
154		-)))
155		-|(% style="width:102px" %)(((
156		-S31B-LB
157		-)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
158		-1 x SHT31 Probe
	189	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
159	159
160		-Installed in device.
161		-)))
162	162
163		-(% style="display:none" %)
	192	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
164	164
165	165
	195	+**Probe Mechanical:**
166	166
167		-== 1.9 Mechanical ==
168	168
	198	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-1.png?rev=1.1||alt="image-20220610172003-1.png"]]
169	169
170		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
171	171
	201	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
172	172
173		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
174	174
	204	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
175	175
176		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
177	177
	207	+= 2. Configure DDS75-LB to connect to LoRaWAN network =
178	178
179		-= 2. Configure S31x-LB to connect to LoRaWAN network =
180		-
181	181	== 2.1 How it works ==
182	182
183	183
184		-The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	212	+The DDS75-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS75-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
185	185
	214	+(% style="display:none" %) (%%)
186	186
187	187	== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
188	188
...	...	@@ -189,13 +189,15 @@
189	189
190	190	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
191	191
192		-The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	221	+The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
193	193
	223	+[[image:image-20230612171032-3.png||height="492" width="855"]](% style="display:none" %)
194	194
195		-(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
196	196
197		-Each S31x-LB is shipped with a sticker with the default device EUI as below:
	226	+(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS75-LB.
198	198
	228	+Each DDS75-LB is shipped with a sticker with the default device EUI as below:
	229	+
199	199	[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
200	200
201	201
...	...	@@ -223,10 +223,10 @@
223	223	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
224	224
225	225
226		-(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
	257	+(% style="color:blue" %)**Step 2:**(%%) Activate on DDS75-LB
227	227
228	228
229		-Press the button for 5 seconds to activate the S31x-LB.
	260	+Press the button for 5 seconds to activate the DDS75-LB.
230	230
231	231	(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
232	232
...	...	@@ -233,167 +233,178 @@
233	233	After join success, it will start to upload messages to TTN and you can see the messages in the panel.
234	234
235	235
236		-== 2.3 ​Uplink Payload ==
	267	+== 2.3  ​Uplink Payload ==
237	237
238		-=== 2.3.1 Device Status, FPORT~=5 ===
239	239
	270	+(((
	271	+(((
	272	+DDS75-LB will uplink payload via LoRaWAN with below payload format:
	273	+)))
240	240
241		-Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
	275	+(((
	276	+Uplink payload includes in total 4 bytes.
	277	+Payload for firmware version v1.1.4. . Before v1.1.3, there is on two fields: BAT and Distance
	278	+)))
	279	+)))
242	242
243		-The Payload format is as below.
	281	+(((
	282	+
	283	+)))
244	244
	285	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
	286	+|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
	287	+**Size(bytes)**
	288	+)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
	289	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
	290	+[[Distance>>||anchor="H2.3.2A0Distance"]]
	291	+(unit: mm)
	292	+)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
	293	+[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
	294	+)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
245	245
246		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
247		-|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
248		-|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
249		-|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
	296	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
250	250
251		-Example parse in TTNv3
252	252
253		-[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
	299	+=== 2.3.1  Battery Info ===
254	254
255	255
256		-(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
	302	+Check the battery voltage for DDS75-LB.
257	257
258		-(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
	304	+Ex1: 0x0B45 = 2885mV
259	259
260		-(% style="color:#037691" %)**Frequency Band**:
	306	+Ex2: 0x0B49 = 2889mV
261	261
262		-*0x01: EU868
263	263
264		-*0x02: US915
	309	+=== 2.3.2  Distance ===
265	265
266		-*0x03: IN865
267	267
268		-*0x04: AU915
	312	+(((
	313	+Get the distance. Flat object range 280mm - 7500mm.
	314	+)))
269	269
270		-*0x05: KZ865
	316	+(((
	317	+For example, if the data you get from the register is 0x0B 0x05, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
271	271
272		-*0x06: RU864
	319	+(% style="color:#4472c4" %)**0B05(H) = 2821 (D) = 2821 mm.**
	320	+)))
273	273
274		-*0x07: AS923
275	275
276		-*0x08: AS923-1
	323	+* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
	324	+* If the sensor value lower than 0x0118 (280mm), the sensor value will be invalid. Since v1.1.4, all value lower than 280mm will be set to 0x0014(20mm) which means the value is invalid.
277	277
278		-*0x09: AS923-2
	326	+=== 2.3.3  Interrupt Pin ===
279	279
280		-*0x0a: AS923-3
281	281
282		-*0x0b: CN470
	329	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3A0SetInterruptMode"]] for the hardware and software set up.
283	283
284		-*0x0c: EU433
	331	+**Example:**
285	285
286		-*0x0d: KR920
	333	+0x00: Normal uplink packet.
287	287
288		-*0x0e: MA869
	335	+0x01: Interrupt Uplink Packet.
289	289
290	290
291		-(% style="color:#037691" %)**Sub-Band**:
	338	+=== 2.3.4  DS18B20 Temperature sensor ===
292	292
293		-AU915 and US915:value 0x00 ~~ 0x08
294	294
295		-CN470: value 0x0B ~~ 0x0C
	341	+This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
296	296
297		-Other Bands: Always 0x00
	343	+**Example**:
298	298
	345	+If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
299	299
300		-(% style="color:#037691" %)**Battery Info**:
	347	+If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
301	301
302		-Check the battery voltage.
	349	+(% style="color:red" %)**Note: DS18B20 feature is supported in the hardware version > v1.3 which made since early of 2021.**
303	303
304		-Ex1: 0x0B45 = 2885mV
305	305
306		-Ex2: 0x0B49 = 2889mV
	352	+=== 2.3.5  Sensor Flag ===
307	307
308	308
309		-=== 2.3.2  Sensor Data. FPORT~=2 ===
	355	+(((
	356	+0x01: Detect Ultrasonic Sensor
	357	+)))
310	310
311		-
312		-Sensor Data is uplink via FPORT=2
313		-
314		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
315		-|=(% style="width: 90px;background-color:#D9E2F3" %)(((
316		-**Size(bytes)**
317		-)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
318		-|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
319		-[[Battery>>||anchor="HBattery"]]
320		-)))|(% style="width:130px" %)(((
321		-[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
322		-)))|(% style="width:91px" %)(((
323		-[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
324		-)))|(% style="width:103px" %)(((
325		-[[Temperature>>||anchor="HTemperature"]]
326		-)))|(% style="width:80px" %)(((
327		-[[Humidity>>||anchor="HHumidity"]]
	359	+(((
	360	+0x00: No Ultrasonic Sensor
328	328	)))
329	329
330		-==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
331	331
332		-Sensor Battery Level.
	364	+=== 2.3.6  Decode payload in The Things Network ===
333	333
334		-Ex1: 0x0B45 = 2885mV
335	335
336		-Ex2: 0x0B49 = 2889mV
	367	+While using TTN network, you can add the payload format to decode the payload.
337	337
	369	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
338	338
	371	+The payload decoder function for TTN V3 is here:
339	339
340		-==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
	373	+(((
	374	+DDS75-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
	375	+)))
341	341
342		-**Example**:
343	343
344		-If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
	378	+== 2.4  Uplink Interval ==
345	345
346		-If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
347	347
348		-（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
	381	+The DDS75-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
349	349
350	350
351		-==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
	384	+== 2.5  ​Show Data in DataCake IoT Server ==
352	352
353	353
354		-Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
	387	+(((
	388	+[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	389	+)))
355	355
	391	+(((
	392	+
	393	+)))
356	356
357		-==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag& MOD**(%%) ====
	395	+(((
	396	+(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	397	+)))
358	358
	399	+(((
	400	+(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	401	+)))
359	359
360		-**Example:**
361	361
362		-If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
	404	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
363	363
364		-If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
365	365
366		-If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
	407	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
367	367
368		-If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
369	369
	410	+(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
370	370
371		-== 2.4 Payload Decoder file ==
	412	+(% style="color:blue" %)**Step 4**(%%)**: Search the DDS75-LB and add DevEUI.**
372	372
	414	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
373	373
374		-In TTN, use can add a custom payload so it shows friendly reading
375	375
376		-In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
	417	+After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
377	377
378		-[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
	419	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
379	379
380	380
381		-== 2.5 Datalog Feature ==
382	382
	423	+== 2.6 Datalog Feature ==
383	383
384		-Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
385	385
	426	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS75-LB will store the reading for future retrieving purposes.
386	386
387		-=== 2.5.1 Ways to get datalog via LoRaWAN ===
388	388
	429	+=== 2.6.1 Ways to get datalog via LoRaWAN ===
389	389
390		-Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
391	391
	432	+Set PNACKMD=1, DDS75-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS75-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
	433	+
392	392	* (((
393		-a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
	435	+a) DDS75-LB will do an ACK check for data records sending to make sure every data arrive server.
394	394	)))
395	395	* (((
396		-b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
	438	+b) DDS75-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS75-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS75-LB gets a ACK, DDS75-LB will consider there is a network connection and resend all NONE-ACK messages.
397	397	)))
398	398
399	399	Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
...	...	@@ -401,10 +401,10 @@
401	401	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
402	402
403	403
404		-=== 2.5.2 Unix TimeStamp ===
	446	+=== 2.6.2 Unix TimeStamp ===
405	405
406	406
407		-S31x-LB uses Unix TimeStamp format based on
	449	+DDS75-LB uses Unix TimeStamp format based on
408	408
409	409	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
410	410
...	...	@@ -418,134 +418,62 @@
418	418	So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
419	419
420	420
421		-=== 2.5.3 Set Device Time ===
	463	+=== 2.6.3 Set Device Time ===
422	422
423	423
424	424	User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
425	425
426		-Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	468	+Once DDS75-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to SW3L-LB. If DDS75-LB fails to get the time from the server, DDS75-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
427	427
428	428	(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
429	429
430	430
431		-=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
	473	+=== 2.6.4 Poll sensor value ===
432	432
433	433
434		-The Datalog uplinks will use below payload format.
	476	+Users can poll sensor values based on timestamps. Below is the downlink command.
435	435
436		-**Retrieval data payload:**
	478	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
	479	+|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
	480	+|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
	481	+|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
437	437
438		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
439		-|=(% style="width: 80px;background-color:#D9E2F3" %)(((
440		-**Size(bytes)**
441		-)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
442		-|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
443		-Temp_Black
444		-)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
445		-
446		-**Poll message flag & Ext:**
447		-
448		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
449		-
450		-**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
451		-
452		-**Poll Message Flag**: 1: This message is a poll message reply.
453		-
454		-* Poll Message Flag is set to 1.
455		-
456		-* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
457		-
458		-For example, in US915 band, the max payload for different DR is:
459		-
460		-**a) DR0:** max is 11 bytes so one entry of data
461		-
462		-**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
463		-
464		-**c) DR2:** total payload includes 11 entries of data
465		-
466		-**d) DR3: **total payload includes 22 entries of data.
467		-
468		-If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
469		-
470		-
471		-**Example:**
472		-
473		-If S31x-LB has below data inside Flash:
474		-
475		-[[image:1682646494051-944.png]]
476		-
477		-If user sends below downlink command: 3160065F9760066DA705
478		-
479		-Where : Start time: 60065F97 = time 21/1/19 04:27:03
480		-
481		- Stop time: 60066DA7= time 21/1/19 05:27:03
482		-
483		-
484		-**S31x-LB will uplink this payload.**
485		-
486		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
487		-
488	488	(((
489		-__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
	484	+Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
490	490	)))
491	491
492	492	(((
493		-Where the first 11 bytes is for the first entry:
	488	+For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
494	494	)))
495	495
496	496	(((
497		-7FFF089801464160065F97
	492	+Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
498	498	)))
499	499
500	500	(((
501		-**Ext sensor data**=0x7FFF/100=327.67
	496	+Uplink Internal =5s，means DDS75-LB will send one packet every 5s. range 5~~255s.
502	502	)))
503	503
504		-(((
505		-**Temp**=0x088E/100=22.00
506		-)))
507	507
508		-(((
509		-**Hum**=0x014B/10=32.6
510		-)))
511		-
512		-(((
513		-**poll message flag & Ext**=0x41,means reply data,Ext=1
514		-)))
515		-
516		-(((
517		-**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
518		-)))
519		-
520		-
521		-(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
522		-
523		-== 2.6 Temperature Alarm Feature ==
524		-
525		-
526		-S31x-LB work flow with Alarm feature.
527		-
528		-
529		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
530		-
531		-
532	532	== 2.7 Frequency Plans ==
533	533
534	534
535		-The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
	503	+The DDS75-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
536	536
537	537	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
538	538
539	539
540		-= 3. Configure S31x-LB =
	508	+= 3. Configure SW3L-LB =
541	541
542	542	== 3.1 Configure Methods ==
543	543
544	544
545		-S31x-LB supports below configure method:
	513	+DDS75-LB supports below configure method:
546	546
547	547	* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
	516	+
548	548	* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
	518	+
549	549	* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
550	550
551	551	== 3.2 General Commands ==
...	...	@@ -554,6 +554,7 @@
554	554	These commands are to configure:
555	555
556	556	* General system settings like: uplink interval.
	527	+
557	557	* LoRaWAN protocol & radio related command.
558	558
559	559	They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
...	...	@@ -561,21 +561,25 @@
561	561	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
562	562
563	563
564		-== 3.3 Commands special design for S31x-LB ==
	535	+== 3.3 Commands special design for DDS75-LB ==
565	565
566	566
567		-These commands only valid for S31x-LB, as below:
	538	+These commands only valid for DDS75-LB, as below:
568	568
569	569
570	570	=== 3.3.1 Set Transmit Interval Time ===
571	571
572	572
	544	+(((
573	573	Feature: Change LoRaWAN End Node Transmit Interval.
	546	+)))
574	574
	548	+(((
575	575	(% style="color:blue" %)**AT Command: AT+TDC**
	550	+)))
576	576
577	577	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
578		-|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
	553	+|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
579	579	|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
580	580	30000
581	581	OK
...	...	@@ -586,108 +586,36 @@
586	586	Set transmit interval to 60000ms = 60 seconds
587	587	)))
588	588
	564	+(((
589	589	(% style="color:blue" %)**Downlink Command: 0x01**
	566	+)))
590	590
	568	+(((
591	591	Format: Command Code (0x01) followed by 3 bytes time value.
	570	+)))
592	592
	572	+(((
593	593	If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	574	+)))
594	594
595		-* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
596		-* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
	576	+* (((
	577	+Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
	578	+)))
	579	+* (((
	580	+Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
	581	+)))
597	597
598		-=== 3.3.2 Get Device Status ===
	583	+=== 3.3.2 Set Interrupt Mode ===
599	599
600	600
601		-Send a LoRaWAN downlink to ask device send Alarm settings.
602		-
603		-(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
604		-
605		-Sensor will upload Device Status via FPORT=5. See payload section for detail.
606		-
607		-
608		-=== 3.3.3 Set Temperature Alarm Threshold ===
609		-
610		-
611		-* (% style="color:blue" %)**AT Command:**
612		-
613		-(% style="color:#037691" %)**AT+SHTEMP=min,max**
614		-
615		-* When min=0, and max≠0, Alarm higher than max
616		-* When min≠0, and max=0, Alarm lower than min
617		-* When min≠0 and max≠0, Alarm higher than max or lower than min
618		-
619		-Example:
620		-
621		- AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
622		-
623		-* (% style="color:blue" %)**Downlink Payload:**
624		-
625		-(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
626		-
627		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
628		-
629		-
630		-=== 3.3.4 Set Humidity Alarm Threshold ===
631		-
632		-
633		-* (% style="color:blue" %)**AT Command:**
634		-
635		-(% style="color:#037691" %)**AT+SHHUM=min,max**
636		-
637		-* When min=0, and max≠0, Alarm higher than max
638		-* When min≠0, and max=0, Alarm lower than min
639		-* When min≠0 and max≠0, Alarm higher than max or lower than min
640		-
641		-Example:
642		-
643		- AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
644		-
645		-* (% style="color:blue" %)**Downlink Payload:**
646		-
647		-(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
648		-
649		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
650		-
651		-
652		-=== 3.3.5 Set Alarm Interval ===
653		-
654		-
655		-The shortest time of two Alarm packet. (unit: min)
656		-
657		-* (% style="color:blue" %)**AT Command:**
658		-
659		-(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
660		-
661		-* (% style="color:blue" %)**Downlink Payload:**
662		-
663		-(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
664		-
665		-
666		-=== 3.3.6 Get Alarm settings ===
667		-
668		-
669		-Send a LoRaWAN downlink to ask device send Alarm settings.
670		-
671		-* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
672		-
673		-**Example:**
674		-
675		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
676		-
677		-
678		-**Explain:**
679		-
680		-* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
681		-
682		-=== 3.3.7 Set Interrupt Mode ===
683		-
684		-
685	685	Feature, Set Interrupt mode for PA8 of pin.
686	686
	588	+When AT+INTMOD=0 is set, PA8 is used as a digital input port.
	589	+
687	687	(% style="color:blue" %)**AT Command: AT+INTMOD**
688	688
689	689	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
690		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
	593	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
691	691	|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
692	692	0
693	693	OK
...	...	@@ -708,44 +708,13 @@
708	708	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
709	709
710	710	* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
	614	+
711	711	* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
712	712
713		-=== ===
714		-
715		-=== 3.3.8 Set Power Output Duration ===
716		-
717		-
718		-Control the output duration 5V . Before each sampling, device will
719		-
720		-~1. first enable the power output to external sensor,
721		-
722		-2. keep it on as per duration, read sensor value and construct uplink payload
723		-
724		-3. final, close the power output.
725		-
726		-(% style="color:blue" %)**AT Command: AT+5VT**
727		-
728		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
729		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
730		-|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
731		-OK
732		-|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
733		-
734		-(% style="color:blue" %)**Downlink Command: 0x07**
735		-
736		-Format: Command Code (0x07) followed by 2 bytes.
737		-
738		-The first and second bytes are the time to turn on.
739		-
740		-* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
741		-* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
742		-
743		-= =
744		-
745	745	= 4. Battery & Power Consumption =
746	746
747	747
748		-S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
	620	+DDS75-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
749	749
750	750	[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
751	751
...	...	@@ -754,30 +754,36 @@
754	754
755	755
756	756	(% class="wikigeneratedid" %)
757		-User can change firmware S31x-LB to:
	629	+User can change firmware DDS75-LB to:
758	758
759	759	* Change Frequency band/ region.
	632	+
760	760	* Update with new features.
	634	+
761	761	* Fix bugs.
762	762
763		-Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
	637	+Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/7la95mae0fn03xe/AACtzs-32m22TLb75B-iIr-Qa?dl=0]]**
764	764
765		-
766	766	Methods to Update Firmware:
767	767
768	768	* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
	642	+
769	769	* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
770	770
771	771	= 6. FAQ =
772	772
	647	+== 6.1  AT Commands input doesn't work ==
773	773
774	774
	650	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	651	+
	652	+
775	775	= 7. Order Info =
776	776
777	777
778		-Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
	656	+Part Number: (% style="color:blue" %)**DDS75-LB-XXX-YYY**
779	779
780		-(% style="color:red" %)**XX**(%%): The default frequency band
	658	+(% style="color:red" %)**XXX**(%%): **The default frequency band**
781	781
782	782	* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
783	783
...	...	@@ -795,12 +795,43 @@
795	795
796	796	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
797	797
	676	+(((
	677	+(% style="color:blue" %)**YYY**(%%): **Flow Sensor Model:**
	678	+)))
	679	+
	680	+(((
	681	+ (% style="color:blue" %) **004:**(%%) DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L
	682	+)))
	683	+
	684	+(((
	685	+ (% style="color:blue" %) **006:**(%%) DW-006 Flow Sensor: diameter: G3/4” / DN20. 390 pulse = 1 L
	686	+)))
	687	+
	688	+(((
	689	+ (% style="color:blue" %) **010:**(%%) DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L
	690	+)))
	691	+
	692	+* (((
	693	+calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
	694	+)))
	695	+
	696	+* (((
	697	+calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
	698	+)))
	699	+
	700	+* (((
	701	+calculate flag=2: for SW3L-010 Flow Sensor: 64  pulse = 1 L
	702	+
	703	+
	704	+
	705	+)))
	706	+
798	798	= 8. ​Packing Info =
799	799
800	800
801	801	(% style="color:#037691" %)**Package Includes**:
802	802
803		-* S31x-LB LoRaWAN Temperature & Humidity Sensor
	712	+* DDS75-LB LoRaWAN Distance Detection Sensor x 1
804	804
805	805	(% style="color:#037691" %)**Dimension and weight**:
806	806

image-20230524105433-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+121.4 KB

Content

image-20230524105747-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+223.2 KB

Content

image-20230524110125-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+194.1 KB

Content

image-20230524110211-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+110.1 KB

Content

image-20230524114302-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.0 KB

Content

image-20230524114654-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.8 KB

Content

image-20230524114826-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.3 KB

Content

image-20230524144422-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.9 KB

Content

image-20230524144456-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.9 KB

Content

image-20230527093155-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+9.3 KB

Content

image-20230527093214-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.7 KB

Content

image-20230530084138-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230530084608-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230530111051-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+85.1 KB

Content

image-20230530111412-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+85.0 KB

Content

image-20230530135919-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+87.6 KB

Content

image-20230530135929-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+87.6 KB

Content

image-20230530140053-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.3 MB

Content

image-20230612170349-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+164.2 KB

Content

image-20230612170943-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+86.4 KB

Content

image-20230612171032-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+86.4 KB

Content