Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 18 added, 0 removed)
  • image-20230524105433-1.png
  • image-20230524105747-2.png
  • image-20230524110125-3.png
  • image-20230524110211-4.png
  • image-20230524114302-1.png
  • image-20230524114654-2.png
  • image-20230524114826-3.png
  • image-20230524144422-1.png
  • image-20230524144456-2.png
  • image-20230527093155-1.jpeg
  • image-20230527093214-2.jpeg
  • image-20230530084138-1.jpeg
  • image-20230530084608-2.jpeg
  • image-20230530111051-3.png
  • image-20230530111412-4.png
  • image-20230530135919-1.png
  • image-20230530135929-2.png
  • image-20230530140053-1.jpeg

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
	1	+SW3L-LB -- LoRaWAN Flow Sensor User Manual

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Saxer
	1	+XWiki.Xiaoling

Content

...	...	@@ -1,9 +1,10 @@
1	1	(% style="text-align:center" %)
2		-[[image:S31-B.jpg]]
	2	+[[image:image-20230530140053-1.jpeg||height="645" width="645"]]
3	3
4	4
5	5
6	6
	7	+
7	7	**Table of Contents：**
8	8
9	9	{{toc/}}
...	...	@@ -15,36 +15,40 @@
15	15
16	16	= 1. Introduction =
17	17
18		-== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
	19	+== 1.1 What is SW3L-LB LoRaWAN Flow Sensor ==
19	19
20	20
21		-The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
	22	+The Dragino SW3L-LB is a (% style="color:blue" %)**LoRaWAN Flow Sensor**(%%). It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to(% style="color:blue" %)** monitor the water usage for buildings.**
22	22
23		-The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
	24	+The SW3L-LB will send water flow volume every 20 minutes. It can also (% style="color:blue" %)**detect the water flow status**(%%) and (% style="color:blue" %)**send Alarm**(%%), to avoid the waste for water usage such as broken toilet case.
24	24
25		-The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	26	+SW3L-LB is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
26	26
27		-S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
	28	+The LoRa wireless technology used in SW3L-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28	28
29		-S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
	30	+SW3L-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30	30
31		-S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	32	+SW3L-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
32	32
33		-Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	34	+Each SW3L-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34	34
35	35
	37	+[[image:image-20230530135919-1.png||height="404" width="806"]]
	38	+
	39	+
36	36	== 1.2 ​Features ==
37	37
38	38
39	39	* LoRaWAN 1.0.3 Class A
40		-* Ultra-low power consumption
41		-* External 3 meters SHT31 probe (For S31-LB)
42		-* Measure range -55°C ~~ 125°C
43		-* Temperature & Humidity alarm
44	44	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	45	+* Ultra-low power consumption
	46	+* Upload water flow volume
	47	+* Monitor water waste
	48	+* AT Commands to change parameters
	49	+* supports Datalog feature
45	45	* Support Bluetooth v5.1 and LoRaWAN remote configure
46	46	* Support wireless OTA update firmware
47		-* Uplink on periodically
	52	+* Uplink on periodically and open/close event
48	48	* Downlink to change configure
49	49	* 8500mAh Battery for long term use
50	50
...	...	@@ -56,20 +56,6 @@
56	56	* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
57	57	* Operating Temperature: -40 ~~ 85°C
58	58
59		-(% style="color:#037691" %)**Temperature Sensor:**
60		-
61		-* Range: -40 to + 80°C
62		-* Accuracy: ±0.2 @ 0-90 °C
63		-* Resolution: 0.1°C
64		-* Long Term Shift: <0.03 °C/yr
65		-
66		-(% style="color:#037691" %)**Humidity Sensor: **
67		-
68		-* Range: 0 ~~ 99.9% RH
69		-* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
70		-* Resolution: 0.01% RH
71		-* Long Term Shift: <0.25 %RH/yr
72		-
73	73	(% style="color:#037691" %)**LoRa Spec:**
74	74
75	75	* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
...	...	@@ -90,15 +90,23 @@
90	90	* Sleep Mode: 5uA @ 3.3v
91	91	* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
92	92
93		-== 1.4 Sleep mode and working mode ==
	84	+== 1.4 Applications ==
94	94
95	95
	87	+* Flow Sensor application
	88	+* Water Control
	89	+* Toilet Flow Sensor
	90	+* Monitor Waste water
	91	+
	92	+== 1.5 Sleep mode and working mode ==
	93	+
	94	+
96	96	(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97	97
98	98	(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
99	99
100	100
101		-== 1.5 Button & LEDs ==
	100	+== 1.6 Button & LEDs ==
102	102
103	103
104	104	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
...	...	@@ -117,10 +117,10 @@
117	117	)))
118	118	|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
119	119
120		-== 1.6 BLE connection ==
	119	+== 1.7 BLE connection ==
121	121
122	122
123		-S31x-LB support BLE remote configure.
	122	+SW3L-LB support BLE remote configure.
124	124
125	125
126	126	BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
...	...	@@ -132,57 +132,58 @@
132	132	If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133	133
134	134
135		-== 1.7 Pin Definitions ==
	134	+== 1.8 Pin Definitions ==
136	136
137	137	[[image:image-20230523174230-1.png]]
138	138
139		-== ==
140	140
141		-== 1.8  Hardware Variant ==
	139	+== 1.9 Flow Sensor Spec ==
142	142
143	143
	142	+(((
144	144	(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
145		-|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
146		-|(% style="width:102px" %)(((
147		-S31-LB
148		-)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
149		-1 x SHT31 Probe
	144	+|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Model**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Probe**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Diameter**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Range**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**Max Pressure**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Measure**
	145	+|(% style="width:88px" %)SW3L-004|(% style="width:75px" %)DW-004|(% style="width:107px" %)G1/2" /DN15|(% style="width:101px" %)1~~30L/min|(% style="width:116px" %)≤ 2.0Mpa|(% style="width:124px" %)450 pulse = 1 L
	146	+|(% style="width:88px" %)SW3L-006|(% style="width:75px" %)DW-006|(% style="width:107px" %)G3/4" /DN20|(% style="width:101px" %)1~~60L/min|(% style="width:116px" %)≤ 1.2Mpa|(% style="width:124px" %)390 pulse = 1 L
	147	+|(% style="width:88px" %)SW3L-010|(% style="width:75px" %)DW-010|(% style="width:107px" %)G 1" /DN25|(% style="width:101px" %)2~~100L/min|(% style="width:116px" %)≤ 2.0Mpa|(% style="width:124px" %)64 pulse = 1 L
	148	+)))
150	150
151		-Cable Length : 2 meters
152	152
153		-
154		-)))
155		-|(% style="width:102px" %)(((
156		-S31B-LB
157		-)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
158		-1 x SHT31 Probe
	151	+== 2.10 Mechanical ==
159	159
160		-Installed in device.
161		-)))
162	162
163		-(% style="display:none" %)
	154	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
164	164
165	165
	157	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
166	166
167		-== 1.9 Mechanical ==
168	168
	160	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
169	169
170		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
171	171
	163	+(% style="color:blue" %)**DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L**
172	172
173		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
	165	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091350-1.png?width=722&height=385&rev=1.1||alt="image-20220519091350-1.png"]]
174	174
175	175
176		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
	168	+(% style="color:blue" %)**006: DW-006 Flow Sensor: diameter: G3/4” / DN20.  390 pulse = 1 L**
177	177
	170	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091423-2.png?width=723&height=258&rev=1.1||alt="image-20220519091423-2.png"]]
178	178
179		-= 2. Configure S31x-LB to connect to LoRaWAN network =
180	180
	173	+(% style="color:blue" %)**010: DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L**
	174	+
	175	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091423-3.png?width=724&height=448&rev=1.1||alt="image-20220519091423-3.png"]]
	176	+
	177	+
	178	+= 2. Configure CPL03-LB to connect to LoRaWAN network =
	179	+
181	181	== 2.1 How it works ==
182	182
183	183
184		-The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	183	+The SW3L-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the SW3L-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
185	185
	185	+(% style="display:none" %) (%%)
186	186
187	187	== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
188	188
...	...	@@ -189,13 +189,15 @@
189	189
190	190	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
191	191
192		-The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	192	+The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
193	193
	194	+[[image:image-20230530135929-2.png||height="404" width="806"]](% style="display:none" %)
194	194
195		-(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
196	196
197		-Each S31x-LB is shipped with a sticker with the default device EUI as below:
	197	+(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from SW3L-LB.
198	198
	199	+Each SW3L-LB is shipped with a sticker with the default device EUI as below:
	200	+
199	199	[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
200	200
201	201
...	...	@@ -223,10 +223,10 @@
223	223	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
224	224
225	225
226		-(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
	228	+(% style="color:blue" %)**Step 2:**(%%) Activate on SW3L-LB
227	227
228	228
229		-Press the button for 5 seconds to activate the S31x-LB.
	231	+Press the button for 5 seconds to activate the SW3L-LB.
230	230
231	231	(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
232	232
...	...	@@ -238,8 +238,10 @@
238	238	=== 2.3.1 Device Status, FPORT~=5 ===
239	239
240	240
241		-Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
	243	+Include device configure status. Once SW3L-LB Joined the network, it will uplink this message to the server. After that, SW3L-LB will uplink Device Status every 12 hours.
242	242
	245	+Users can use the downlink command(**0x26 01**) to ask SW3L-LB to send device configure detail, include device configure status. SW3L-LB will uplink a payload via FPort=5 to server.
	246	+
243	243	The Payload format is as below.
244	244
245	245
...	...	@@ -250,10 +250,10 @@
250	250
251	251	Example parse in TTNv3
252	252
253		-[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
	257	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652925144491-755.png?width=732&height=139&rev=1.1||alt="1652925144491-755.png"]]
254	254
255	255
256		-(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
	260	+(% style="color:#037691" %)**Sensor Model**(%%): For SW3L-LB, this value is 0x11
257	257
258	258	(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
259	259
...	...	@@ -306,243 +306,355 @@
306	306	Ex2: 0x0B49 = 2889mV
307	307
308	308
309		-=== 2.3.2  Sensor Data. FPORT~=2 ===
	313	+=== 2.3.2 Sensor Configuration, FPORT~=4 ===
310	310
311	311
312		-Sensor Data is uplink via FPORT=2
	316	+SW3L will only send this command after getting the downlink command (0x26 02) from the server.
313	313
314		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
315		-|=(% style="width: 90px;background-color:#D9E2F3" %)(((
316		-**Size(bytes)**
317		-)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
318		-|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
319		-[[Battery>>||anchor="HBattery"]]
320		-)))|(% style="width:130px" %)(((
321		-[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
322		-)))|(% style="width:91px" %)(((
323		-[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
324		-)))|(% style="width:103px" %)(((
325		-[[Temperature>>||anchor="HTemperature"]]
326		-)))|(% style="width:80px" %)(((
327		-[[Humidity>>||anchor="HHumidity"]]
328		-)))
	318	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
	319	+|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %) **Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:96px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:74px" %)**1**
	320	+|**Value**|(% style="width:104px" %)TDC(unit:sec)|(% style="width:43px" %)N/A|(% style="width:91px" %)Stop Timer|(% style="width:100px" %)Alarm Timer|(% style="width:69px" %)Reserve
329	329
330		-==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
	322	+* (% style="color:#037691" %)**TDC: (default: 0x0004B0)**
331	331
332		-Sensor Battery Level.
	324	+Uplink interval for the total pulse count, default value is 0x0004B0 which is 1200 seconds = 20 minutes.
333	333
334		-Ex1: 0x0B45 = 2885mV
335	335
336		-Ex2: 0x0B49 = 2889mV
	327	+* (% style="color:#037691" %)**STOP Duration & Alarm Timer**
337	337
	329	+Shows the configure value of [[Alarm for continuously water flow>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]
338	338
	331	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095747-2.png?width=723&height=113&rev=1.1||alt="image-20220519095747-2.png"]]
339	339
340		-==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
341	341
342		-**Example**:
	334	+=== 2.3.3 Water Flow Value, Uplink FPORT~=2 ===
343	343
344		-If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
345	345
346		-If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
	337	+(((
	338	+SW3L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And SW3L will:
	339	+)))
347	347
348		-（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
	341	+(((
	342	+periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].
	343	+)))
349	349
	345	+(((
	346	+Uplink Payload totals 11 bytes.
	347	+)))
350	350
351		-==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
	349	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
	350	+|=(% colspan="6" style="width: 510px;background-color:#D9E2F3;color:#0070C0" %)**Water Flow Value,  FPORT=2**
	351	+|(% style="width:60px" %)**Size(bytes)**|(% style="width:130px" %)**1**|(% style="width:130px" %)**4**|(% style="width:30px" %)**1**|(% style="width:50px" %)**1**|(% style="width:80px" %)**4**
	352	+|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
	353	+Total pulse Or Last Pulse
	354	+)))|(% style="width:55px" %)MOD|(% style="width:115px" %)Reserve(0x01)|(% style="width:129px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]
352	352
	356	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:470px" %)
	357	+|=(% colspan="4" style="width: 470px;background-color:#D9E2F3;color:#0070C0" %)**Status & Alarm field**
	358	+|(% style="width:60px" %)**Size(bit)**|(% style="width:80px" %)**6**|(% style="width:310px" %)**1**|(% style="width:20px" %)**1**
	359	+|(% style="width:88px" %)**Value**|(% style="width:117px" %)Calculate Flag|(% style="width:221px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:64px" %)N/A
353	353
354		-Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
	361	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-3.png?width=736&height=284&rev=1.1||alt="image-20220519095946-3.png"]]
355	355
356	356
357		-==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag& MOD**(%%) ====
	364	+* (((
	365	+(% style="color:#037691" %)**Calculate Flag**
	366	+)))
358	358
	368	+(((
	369	+The calculate flag is a user defined field, IoT server can use this flag to handle different meters with different pulse factors. For example, if there are 100 Flow Sensors, meters 1 ~~50 are 1 liter/pulse and meters 51 ~~ 100 has 1.5 liter/pulse.
	370	+)))
359	359
360		-**Example:**
	372	+(((
	373	+**Example: in the default payload:**
	374	+)))
361	361
362		-If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
	376	+* (((
	377	+calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
	378	+)))
	379	+* (((
	380	+calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
	381	+)))
	382	+* (((
	383	+calculate flag=2: for SW3L-010 Flow Sensor: 64 pulse = 1 L
	384	+)))
363	363
364		-If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
	386	+(((
	387	+Default value: 0.
	388	+)))
365	365
366		-If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
	390	+(((
	391	+Range (6 bits): (b)000000 ~~ (b) 111111
367	367
368		-If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
	393	+If user use with a meter for example is 0.02L/pulse. To proper decode the correct value in server,
369	369
	395	+1) User can set the Calculate Flag of this sensor to 3.
370	370
371		-== 2.4 Payload Decoder file ==
	397	+2) In server side, when a sensor data arrive, the decoder will check the value of Calculate Flag, It the value is 3, the total volume = 0.02 x Pulse Count.
	398	+)))
372	372
	400	+(((
	401	+(% style="color:red" %)**NOTE: User need to set Calculate Flag to proper value before use Flow Sensor. Downlink or AT Command see: **(%%)Refer: [[Set Calculate Flag>>||anchor="H3.6Setthecalculateflag"]]
	402	+)))
373	373
374		-In TTN, use can add a custom payload so it shows friendly reading
	404	+* (((
	405	+(% style="color:#037691" %)**Alarm**
	406	+)))
375	375
376		-In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
	408	+(((
	409	+See [[Alarm for continuously water flow>>||anchor="H3.4Alarmforcontinuouslywaterflow"]]
	410	+)))
377	377
378		-[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
	412	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-4.png?width=724&height=65&rev=1.1||alt="image-20220519095946-4.png"]]
379	379
380	380
381		-== 2.5 Datalog Feature ==
	415	+* (((
	416	+(% style="color:#037691" %)**Total pulse**
	417	+)))
382	382
	419	+(((
	420	+Total pulse/counting since factory
	421	+)))
383	383
384		-Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
	423	+(((
	424	+Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
	425	+)))
385	385
	427	+* (((
	428	+(% style="color:#037691" %)**Last Pulse**
	429	+)))
386	386
387		-=== 2.5.1 Ways to get datalog via LoRaWAN ===
	431	+(((
	432	+Total pulse since last FPORT=2 uplink. (Default 20 minutes)
	433	+)))
388	388
	435	+(((
	436	+Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
	437	+)))
389	389
390		-Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
391		-
392	392	* (((
393		-a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
	440	+(% style="color:#037691" %)**MOD: Default =0**
394	394	)))
	442	+
	443	+(((
	444	+MOD=0 ~-~-> Uplink Total Pulse since factory
	445	+)))
	446	+
	447	+(((
	448	+MOD=1 ~-~-> Uplink total pulse since last FPORT=2 uplink.
	449	+)))
	450	+
395	395	* (((
396		-b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
	452	+(% style="color:#037691" %)**Water Flow Value**
397	397	)))
398	398
399		-Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
	455	+(((
	456	+**Total Water Flow Volume = (Calculate Flag) x (Total Pulse)=9597/450=21.3L**
	457	+)))
400	400
401		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
	459	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-5.png?width=727&height=50&rev=1.1||alt="image-20220519095946-5.png"]]
402	402
403	403
404		-=== 2.5.2 Unix TimeStamp ===
	462	+(((
	463	+**Total Water Flow for TDC timer = (Calculate Flag) x (Last Pulse)=79/450=0.2L**
	464	+)))
405	405
	466	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-6.png?width=733&height=43&rev=1.1||alt="image-20220519095946-6.png"]] ** **
406	406
407		-S31x-LB uses Unix TimeStamp format based on
408	408
409		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
	469	+=== 2.3.4 Historical Water Flow Status, FPORT~=3 ===
410	410
411		-User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
412	412
413		-Below is the converter example
	472	+(((
	473	+SW3L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
	474	+)))
414	414
415		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
	476	+(((
	477	+The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time water flow status.
	478	+)))
416	416
	480	+* (((
	481	+Each data entry is 11 bytes and has the same structure as [[real time water flow status>>||anchor="H2.3.3A0WaterFlowValue2CUplinkFPORT3D2"]], to save airtime and battery, SW3L will send max bytes according to the current DR and Frequency bands.
	482	+)))
417	417
418		-So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
	484	+(((
	485	+For example, in the US915 band, the max payload for different DR is:
	486	+)))
419	419
	488	+(((
	489	+**a) DR0:** max is 11 bytes so one entry of data
	490	+)))
420	420
421		-=== 2.5.3 Set Device Time ===
	492	+(((
	493	+**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
	494	+)))
422	422
	496	+(((
	497	+**c) DR2:** total payload includes 11 entries of data
	498	+)))
423	423
424		-User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
	500	+(((
	501	+**d) DR3:** total payload includes 22 entries of data.
	502	+)))
425	425
426		-Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	504	+(((
	505	+If SW3L doesn't have any data in the polling time. It will uplink 11 bytes of 0
	506	+)))
427	427
428		-(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
	508	+(((
	509	+(% style="color:#037691" %)**Downlink:**
	510	+)))
429	429
	512	+(((
	513	+0x31 62 46 B1 F0 62 46 B3 94 07
	514	+)))
430	430
431		-=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
	516	+[[image:1652926690850-712.png||_mstalt="295178" height="115" width="726"]]
432	432
433	433
434		-The Datalog uplinks will use below payload format.
	519	+(((
	520	+(% style="color:#037691" %)**Uplink:**
	521	+)))
435	435
436		-**Retrieval data payload:**
	523	+(((
	524	+00 00 01 00 00 00 00 62 46 B2 26 00 00 01 00 00 00 00 62 46 B2 5D 00 00 01 00 00 00 00 62 46 B2 99 00 00 01 00 00 00 00 62 46 B2 D5 00 00 01 00 00 01 15 62 46 B3 11 00 00 01 00 00 01 1F 62 46 B3 7E
	525	+)))
437	437
438		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
439		-|=(% style="width: 80px;background-color:#D9E2F3" %)(((
440		-**Size(bytes)**
441		-)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
442		-|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
443		-Temp_Black
444		-)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
	527	+(((
	528	+(% style="color:#037691" %)**Parsed Value:**
	529	+)))
445	445
446		-**Poll message flag & Ext:**
	531	+(((
	532	+[Alarm, Calculate Flag, MOD, Total pulse or Last Pulse,** **Water Flow Value, TIME]
	533	+)))
447	447
448		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
449	449
450		-**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
	536	+(((
	537	+[FALSE,0,0,0,0.0,2022-04-01 08:04:54],
	538	+)))
451	451
452		-**Poll Message Flag**: 1: This message is a poll message reply.
	540	+(((
	541	+[FALSE,0,0,0,0.0,2022-04-01 08:05:49],
	542	+)))
453	453
454		-* Poll Message Flag is set to 1.
	544	+(((
	545	+[FALSE,0,0,0,0.0,2022-04-01 08:06:49],
	546	+)))
455	455
456		-* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
	548	+(((
	549	+[FALSE,0,0,0,0.0,2022-04-01 08:07:49],
	550	+)))
457	457
458		-For example, in US915 band, the max payload for different DR is:
	552	+(((
	553	+[FALSE,0,0,277,0.6,2022-04-01 08:08:49],
	554	+)))
459	459
460		-**a) DR0:** max is 11 bytes so one entry of data
	556	+(((
	557	+[FALSE,0,0,287,0.6,2022-04-01 08:10:38],
	558	+)))
461	461
462		-**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
	560	+[[image:1652926777796-267.png||_mstalt="300183" height="279" width="724"]]
463	463
464		-**c) DR2:** total payload includes 11 entries of data
465	465
466		-**d) DR3: **total payload includes 22 entries of data.
	563	+== 2.4 Payload Decoder file ==
467	467
468		-If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
469	469
	566	+In TTN, use can add a custom payload so it shows friendly reading
470	470
471		-**Example:**
	568	+In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
472	472
473		-If S31x-LB has below data inside Flash:
474	474
475		-[[image:1682646494051-944.png]]
	571	+== 2.5 Datalog Feature ==
476	476
477		-If user sends below downlink command: 3160065F9760066DA705
478	478
479		-Where : Start time: 60065F97 = time 21/1/19 04:27:03
	574	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
480	480
481		- Stop time: 60066DA7= time 21/1/19 05:27:03
482	482
	577	+=== 2.5.1 Ways to get datalog via LoRaWAN ===
483	483
484		-**S31x-LB will uplink this payload.**
485	485
486		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
	580	+Set PNACKMD=1, CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
487	487
488		-(((
489		-__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
	582	+* (((
	583	+a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
490	490	)))
491		-
492		-(((
493		-Where the first 11 bytes is for the first entry:
	585	+* (((
	586	+b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
494	494	)))
495	495
496		-(((
497		-7FFF089801464160065F97
498		-)))
	589	+Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
499	499
500		-(((
501		-**Ext sensor data**=0x7FFF/100=327.67
502		-)))
	591	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
503	503
	593	+
	594	+=== 2.5.2 Unix TimeStamp ===
	595	+
	596	+
	597	+CPL03-LB uses Unix TimeStamp format based on
	598	+
	599	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
	600	+
	601	+User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
	602	+
	603	+Below is the converter example
	604	+
	605	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
	606	+
	607	+
	608	+So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
	609	+
	610	+
	611	+=== 2.5.3 Set Device Time ===
	612	+
	613	+
	614	+User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
	615	+
	616	+Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	617	+
	618	+(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
	619	+
	620	+
	621	+=== 2.5.4 Poll sensor value ===
	622	+
	623	+
	624	+Users can poll sensor values based on timestamps. Below is the downlink command.
	625	+
	626	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
	627	+|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
	628	+|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
	629	+|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
	630	+
504	504	(((
505		-**Temp**=0x088E/100=22.00
	632	+Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
506	506	)))
507	507
508	508	(((
509		-**Hum**=0x014B/10=32.6
	636	+For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
510	510	)))
511	511
512	512	(((
513		-**poll message flag & Ext**=0x41,means reply data,Ext=1
	640	+Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
514	514	)))
515	515
516	516	(((
517		-**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
	644	+Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
518	518	)))
519	519
520	520
521		-(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
522		-
523		-== 2.6 Temperature Alarm Feature ==
524		-
525		-
526		-S31x-LB work flow with Alarm feature.
527		-
528		-
529		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
530		-
531		-
532	532	== 2.7 Frequency Plans ==
533	533
534	534
535		-The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
	651	+The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
536	536
537	537	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
538	538
539	539
540		-= 3. Configure S31x-LB =
	656	+= 3. Configure CPL03-LB =
541	541
542	542	== 3.1 Configure Methods ==
543	543
544	544
545		-S31x-LB supports below configure method:
	661	+CPL03-LB supports below configure method:
546	546
547	547	* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
548	548	* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
...	...	@@ -561,21 +561,25 @@
561	561	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
562	562
563	563
564		-== 3.3 Commands special design for S31x-LB ==
	680	+== 3.3 Commands special design for CPL03-LB ==
565	565
566	566
567		-These commands only valid for S31x-LB, as below:
	683	+These commands only valid for CPL03-LB, as below:
568	568
569	569
570	570	=== 3.3.1 Set Transmit Interval Time ===
571	571
572	572
	689	+(((
573	573	Feature: Change LoRaWAN End Node Transmit Interval.
	691	+)))
574	574
	693	+(((
575	575	(% style="color:blue" %)**AT Command: AT+TDC**
	695	+)))
576	576
577	577	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
578		-|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
	698	+|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
579	579	|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
580	580	30000
581	581	OK
...	...	@@ -586,18 +586,47 @@
586	586	Set transmit interval to 60000ms = 60 seconds
587	587	)))
588	588
	709	+(((
589	589	(% style="color:blue" %)**Downlink Command: 0x01**
	711	+)))
590	590
	713	+(((
591	591	Format: Command Code (0x01) followed by 3 bytes time value.
	715	+)))
592	592
	717	+(((
593	593	If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	719	+)))
594	594
595		-* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
596		-* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
	721	+* (((
	722	+Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
	723	+)))
	724	+* (((
	725	+Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
597	597
598		-=== 3.3.2 Get Device Status ===
599	599
	728	+
	729	+)))
600	600
	731	+=== 3.3.2 Quit AT Command ===
	732	+
	733	+
	734	+Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
	735	+
	736	+(% style="color:blue" %)**AT Command: AT+DISAT**
	737	+
	738	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
	739	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	740	+|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
	741	+
	742	+(% style="color:blue" %)**Downlink Command:**
	743	+
	744	+No downlink command for this feature.
	745	+
	746	+
	747	+=== 3.3.3 Get Device Status ===
	748	+
	749	+
601	601	Send a LoRaWAN downlink to ask device send Alarm settings.
602	602
603	603	(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
...	...	@@ -605,89 +605,202 @@
605	605	Sensor will upload Device Status via FPORT=5. See payload section for detail.
606	606
607	607
608		-=== 3.3.3 Set Temperature Alarm Threshold ===
	757	+=== 3.3.4 Enable / Disable Alarm ===
609	609
610	610
611		-* (% style="color:blue" %)**AT Command:**
	760	+Feature: Enable/Disable Alarm for open/close event. Default value 0.
612	612
613		-(% style="color:#037691" %)**AT+SHTEMP=min,max**
	762	+(% style="color:blue" %)**AT Command:**
614	614
615		-* When min=0, and max≠0, Alarm higher than max
616		-* When min≠0, and max=0, Alarm lower than min
617		-* When min≠0 and max≠0, Alarm higher than max or lower than min
	764	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
	765	+|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
	766	+|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
	767	+|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
618	618
619		-Example:
	769	+(% style="color:blue" %)**Downlink Command:**
620	620
621		- AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
	771	+**0xA7 01**  ~/~/  Same As AT+DISALARM=1
622	622
623		-* (% style="color:blue" %)**Downlink Payload:**
	773	+**0xA7 00    ** ~/~/  Same As AT+DISALARM=0
624	624
625		-(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
626	626
627		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
	776	+=== 3.3.5 Alarm Base on Timeout ===
628	628
629	629
630		-=== 3.3.4 Set Humidity Alarm Threshold ===
	779	+(((
	780	+CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
	781	+)))
631	631
632	632
633		-* (% style="color:blue" %)**AT Command:**
	784	+(((
	785	+(% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
	786	+)))
634	634
635		-(% style="color:#037691" %)**AT+SHHUM=min,max**
	788	+(((
	789	+**Keep Status = 1**: Monitor Close to Open event
	790	+)))
636	636
637		-* When min=0, and max≠0, Alarm higher than max
638		-* When min≠0, and max=0, Alarm lower than min
639		-* When min≠0 and max≠0, Alarm higher than max or lower than min
	792	+(((
	793	+**Keep Status = 0**: Monitor Open to Close event
	794	+)))
640	640
641		-Example:
642	642
643		- AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
	797	+(((
	798	+(% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
	799	+)))
644	644
645		-* (% style="color:blue" %)**Downlink Payload:**
	801	+(((
	802	+Range 0 ~~ 65535(0xFFFF) seconds.
	803	+)))
646	646
647		-(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
	805	+(((
	806	+If** keep time = 0**, Disable Alarm Base on Timeout feature.
	807	+)))
648	648
649		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
	809	+(((
	810	+If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
	811	+)))
650	650
651	651
652		-=== 3.3.5 Set Alarm Interval ===
	814	+(((
	815	+(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
	816	+)))
653	653
	818	+(((
	819	+(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
	820	+)))
654	654
655		-The shortest time of two Alarm packet. (unit: min)
	822	+(((
	823	+(% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
	824	+)))
656	656
657		-* (% style="color:blue" %)**AT Command:**
658	658
659		-(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
	827	+(((
	828	+(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
	829	+)))
660	660
661		-* (% style="color:blue" %)**Downlink Payload:**
	831	+(((
	832	+**Command: 0xA9 aa bb cc**
	833	+)))
662	662
663		-(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
	835	+(((
	836	+**A9: **Command Type Code
	837	+)))
664	664
	839	+(((
	840	+**aa: **status to be monitored
	841	+)))
665	665
666		-=== 3.3.6 Get Alarm settings ===
	843	+(((
	844	+**bb cc: **timeout.
	845	+)))
667	667
668	668
669		-Send a LoRaWAN downlink to ask device send Alarm settings.
	848	+(((
	849	+If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
	850	+)))
670	670
671		-* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
	852	+(((
	853	+Or
	854	+)))
672	672
673		-**Example:**
	856	+(((
	857	+0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
	858	+)))
674	674
675		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
676	676
	861	+=== 3.3.6 Clear Flash Record ===
677	677
678		-**Explain:**
679	679
680		-* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
	864	+Feature: Clear flash storage for data log feature.
681	681
682		-=== 3.3.7 Set Interrupt Mode ===
	866	+(% style="color:blue" %)**AT Command: AT+CLRDTA**
683	683
	868	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
	869	+|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	870	+|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
684	684
	872	+(((
	873	+(% style="color:blue" %)**Downlink Command:**
	874	+)))
	875	+
	876	+(((
	877	+* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
	878	+)))
	879	+
	880	+
	881	+
	882	+=== 3.3.7 Set trigger mode ===
	883	+
	884	+
	885	+Feature: Set the trigger interrupt mode.
	886	+
	887	+(% style="color:blue" %)**AT Command: AT+TTRMOD**
	888	+
	889	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
	890	+|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	891	+|(% style="width:157px" %)(((
	892	+AT+TTRMOD=1
	893	+)))|(% style="width:156px" %)Count and trigger from open to close (rising edge)|(% style="width:89px" %)(((
	894	+(((
	895	+OK
	896	+)))
	897	+)))
	898	+|(% style="width:157px" %)(((
	899	+AT+TTRMOD=0
	900	+)))|(% style="width:156px" %)Count and trigger from close to open (falling edge)|(% style="width:89px" %)(((
	901	+OK
	902	+)))
	903	+
	904	+(% style="color:blue" %)**Downlink Command:**
	905	+
	906	+* **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
	907	+
	908	+=== 3.3.8 Set the calculate flag ===
	909	+
	910	+
	911	+Feature: Set the calculate flag
	912	+
	913	+(% style="color:blue" %)**AT Command: AT+CALCFLAG**
	914	+
	915	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
	916	+|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	917	+|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
	918	+|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
	919	+
	920	+(% style="color:blue" %)**Downlink Command:**
	921	+
	922	+* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
	923	+
	924	+=== 3.3.9 Set count number ===
	925	+
	926	+
	927	+Feature: Manually set the count number
	928	+
	929	+(% style="color:blue" %)**AT Command: AT+SETCNT**
	930	+
	931	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
	932	+|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	933	+|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
	934	+|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
	935	+
	936	+(% style="color:blue" %)**Downlink Command:**
	937	+
	938	+* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
	939	+
	940	+* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
	941	+
	942	+=== 3.3.10 Set Interrupt Mode ===
	943	+
	944	+
685	685	Feature, Set Interrupt mode for PA8 of pin.
686	686
	947	+When AT+INTMOD=0 is set, PA8 is used as a digital input port.
	948	+
687	687	(% style="color:blue" %)**AT Command: AT+INTMOD**
688	688
689	689	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
690		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
	952	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
691	691	|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
692	692	0
693	693	OK
...	...	@@ -708,13 +708,12 @@
708	708	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
709	709
710	710	* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
	973	+
711	711	* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
712	712
713		-=== ===
	976	+=== 3.3.11 Set Power Output Duration ===
714	714
715		-=== 3.3.7 Set Power Output Duration ===
716	716
717		-
718	718	Control the output duration 5V . Before each sampling, device will
719	719
720	720	~1. first enable the power output to external sensor,
...	...	@@ -726,7 +726,7 @@
726	726	(% style="color:blue" %)**AT Command: AT+5VT**
727	727
728	728	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
729		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
	990	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
730	730	|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
731	731	OK
732	732	|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
...	...	@@ -738,14 +738,13 @@
738	738	The first and second bytes are the time to turn on.
739	739
740	740	* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
	1002	+
741	741	* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
742	742
743		-= =
744		-
745	745	= 4. Battery & Power Consumption =
746	746
747	747
748		-S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
	1008	+CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
749	749
750	750	[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
751	751
...	...	@@ -754,30 +754,36 @@
754	754
755	755
756	756	(% class="wikigeneratedid" %)
757		-User can change firmware S31x-LB to:
	1017	+User can change firmware CPL03-LB to:
758	758
759	759	* Change Frequency band/ region.
	1020	+
760	760	* Update with new features.
	1022	+
761	761	* Fix bugs.
762	762
763	763	Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
764	764
765		-
766	766	Methods to Update Firmware:
767	767
768	768	* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
	1030	+
769	769	* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
770	770
771	771	= 6. FAQ =
772	772
	1035	+== 6.1  AT Commands input doesn't work ==
773	773
774	774
	1038	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	1039	+
	1040	+
775	775	= 7. Order Info =
776	776
777	777
778		-Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
	1044	+Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
779	779
780		-(% style="color:red" %)**XX**(%%): The default frequency band
	1046	+(% style="color:red" %)**XXX**(%%): The default frequency band
781	781
782	782	* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
783	783
...	...	@@ -800,7 +800,7 @@
800	800
801	801	(% style="color:#037691" %)**Package Includes**:
802	802
803		-* S31x-LB LoRaWAN Temperature & Humidity Sensor
	1069	+* CPL03-LB LoRaWAN Pulse/Contact Sensor
804	804
805	805	(% style="color:#037691" %)**Dimension and weight**:
806	806

image-20230524105433-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+121.4 KB

Content

image-20230524105747-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+223.2 KB

Content

image-20230524110125-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+194.1 KB

Content

image-20230524110211-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+110.1 KB

Content

image-20230524114302-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.0 KB

Content

image-20230524114654-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.8 KB

Content

image-20230524114826-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.3 KB

Content

image-20230524144422-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.9 KB

Content

image-20230524144456-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.9 KB

Content

image-20230527093155-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+9.3 KB

Content

image-20230527093214-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.7 KB

Content

image-20230530084138-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230530084608-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230530111051-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+85.1 KB

Content

image-20230530111412-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+85.0 KB

Content

image-20230530135919-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+87.6 KB

Content

image-20230530135929-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+87.6 KB

Content

image-20230530140053-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.3 MB

Content