Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 44.1
edited by Saxer Lin
on 2023/05/23 17:52
Change comment: There is no comment for this version
To version 30.1
edited by Ellie Zhang
on 2023/05/06 14:39
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Ellie
Content
... ... @@ -4,7 +4,7 @@
4 4  
5 5  
6 6  
7 -**Table of Contents：**
7 +**目录：**
8 8  
9 9  {{toc/}}
10 10  
... ... @@ -13,29 +13,46 @@
13 13  
14 14  
15 15  
16 -= 1. Introduction =
16 += 一、简介 =
17 17  
18 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
18 +== 1.1 什么是 S31x-LB LoRaWAN 温湿度传感器 ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
21 +(((
22 +Dragino S31x-LB 是 用于物联网解决方案的(% style="color:blue" %)**LoRaWAN 温度和湿度传感器。**(%%)用于(% style="color:blue" %)**精确测量周围环境温度和相对空气湿度**(%%)，然后通过LoRaWAN无线协议上传到物联网服务器。
23 +)))
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
25 +(((
26 +S31x-LB采用的温湿度传感器为SHT31，是Sensirion的全校准、线性化、温度补偿数字输出，具有很强的可靠性和长期稳定性。SHT31 固定在(% style="color:blue" %)**防水防冷凝外壳**(%%)中，可长期使用。
27 +)))
24 24  
29 +(((
25 25  The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
31 +)))
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
33 +(((
34 +S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
35 +)))
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
37 +(((
38 +S31x-LB has max 3 probes which measure maximum 3 temperature points.
39 +)))
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
41 +(((
42 +S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 +)))
32 32  
45 +(((
46 +S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
47 +)))
48 +
49 +(((
33 33  Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 +)))
34 34  
35 35  
36 36  == 1.2 ​Features ==
37 37  
38 -
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Ultra-low power consumption
41 41  * External 3 meters SHT31 probe (For S31-LB)
... ... @@ -132,20 +132,12 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7 Pin Definitions ==
152 +== 1.7  Hardware Variant ==
136 136  
137 -[[image:image-20230523174230-1.png]]
138 138  
139 -== ==
140 -
141 -== 1.8  Hardware Variant ==
142 -
143 -
144 144  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
145 145  |=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
146 -|(% style="width:102px" %)(((
147 -S31-LB
148 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
157 +|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
149 149  1 x SHT31 Probe
150 150  
151 151  Cable Length : 2 meters
... ... @@ -152,9 +152,7 @@
152 152  
153 153  
154 154  )))
155 -|(% style="width:102px" %)(((
156 -S31B-LB
157 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
164 +|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
158 158  1 x SHT31 Probe
159 159  
160 160  Installed in device.
... ... @@ -164,7 +164,7 @@
164 164  
165 165  
166 166  
167 -== 1.9 Mechanical ==
174 +== 1.8 Mechanical ==
168 168  
169 169  
170 170  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -316,18 +316,18 @@
316 316  **Size(bytes)**
317 317  )))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
318 318  |(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
319 -[[Battery>>||anchor="HBattery"]]
326 +[[Battery>>||anchor="HBattery:"]]
320 320  )))|(% style="width:130px" %)(((
321 321  [[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
322 322  )))|(% style="width:91px" %)(((
323 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
330 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
324 324  )))|(% style="width:103px" %)(((
325 -[[Temperature>>||anchor="HTemperature"]]
332 +[[Temperature>>||anchor="HTemperature:"]]
326 326  )))|(% style="width:80px" %)(((
327 -[[Humidity>>||anchor="HHumidity"]]
334 +[[Humidity>>||anchor="HHumidity:"]]
328 328  )))
329 329  
330 -==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
337 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
331 331  
332 332  Sensor Battery Level.
333 333  
... ... @@ -337,7 +337,7 @@
337 337  
338 338  
339 339  
340 -==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
347 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
341 341  
342 342  **Example**:
343 343  
... ... @@ -348,13 +348,13 @@
348 348  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
349 349  
350 350  
351 -==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
358 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
352 352  
353 353  
354 354  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
355 355  
356 356  
357 -==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag& MOD**(%%) ====
364 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
358 358  
359 359  
360 360  **Example:**
... ... @@ -375,7 +375,7 @@
375 375  
376 376  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
377 377  
378 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
385 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
379 379  
380 380  
381 381  == 2.5 Datalog Feature ==
... ... @@ -387,20 +387,15 @@
387 387  === 2.5.1 Ways to get datalog via LoRaWAN ===
388 388  
389 389  
390 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
397 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
391 391  
392 -* (((
393 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
394 -)))
395 -* (((
396 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
397 -)))
399 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
400 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
398 398  
399 399  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
400 400  
401 401  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
402 402  
403 -
404 404  === 2.5.2 Unix TimeStamp ===
405 405  
406 406  
... ... @@ -414,7 +414,6 @@
414 414  
415 415  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
416 416  
417 -
418 418  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
419 419  
420 420  
... ... @@ -440,8 +440,8 @@
440 440  **Size(bytes)**
441 441  )))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
442 442  |(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
443 -Temp_Black
444 -)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
444 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
445 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
445 445  
446 446  **Poll message flag & Ext:**
447 447  
... ... @@ -607,7 +607,6 @@
607 607  
608 608  === 3.3.3 Set Temperature Alarm Threshold ===
609 609  
610 -
611 611  * (% style="color:blue" %)**AT Command:**
612 612  
613 613  (% style="color:#037691" %)**AT+SHTEMP=min,max**
... ... @@ -629,7 +629,6 @@
629 629  
630 630  === 3.3.4 Set Humidity Alarm Threshold ===
631 631  
632 -
633 633  * (% style="color:blue" %)**AT Command:**
634 634  
635 635  (% style="color:#037691" %)**AT+SHHUM=min,max**
... ... @@ -651,7 +651,6 @@
651 651  
652 652  === 3.3.5 Set Alarm Interval ===
653 653  
654 -
655 655  The shortest time of two Alarm packet. (unit: min)
656 656  
657 657  * (% style="color:blue" %)**AT Command:**
... ... @@ -682,7 +682,7 @@
682 682  === 3.3.7 Set Interrupt Mode ===
683 683  
684 684  
685 -Feature, Set Interrupt mode for PA8 of pin.
683 +Feature, Set Interrupt mode for GPIO_EXIT.
686 686  
687 687  (% style="color:blue" %)**AT Command: AT+INTMOD**
688 688  
... ... @@ -710,38 +710,6 @@
710 710  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
711 711  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
712 712  
713 -=== ===
714 -
715 -=== 3.3.7 Set Power Output Duration ===
716 -
717 -
718 -Control the output duration 5V . Before each sampling, device will
719 -
720 -~1. first enable the power output to external sensor,
721 -
722 -2. keep it on as per duration, read sensor value and construct uplink payload
723 -
724 -3. final, close the power output.
725 -
726 -(% style="color:blue" %)**AT Command: AT+5VT**
727 -
728 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
729 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
730 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
731 -OK
732 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
733 -
734 -(% style="color:blue" %)**Downlink Command: 0x07**
735 -
736 -Format: Command Code (0x07) followed by 2 bytes.
737 -
738 -The first and second bytes are the time to turn on.
739 -
740 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
741 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
742 -
743 -= =
744 -
745 745  = 4. Battery & Power Consumption =
746 746  
747 747  
... ... @@ -760,61 +760,61 @@
760 760  * Update with new features.
761 761  * Fix bugs.
762 762  
763 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
729 +固件和变更日志可以从以下位置下载：**[[固件下载链接>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
764 764  
765 765  
766 -Methods to Update Firmware:
732 +更新固件的方法：
767 767  
768 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
769 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
734 +* （推荐方式）无线OTA固件更新：  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
735 +* 通过 UART TTL 接口更新。**[[指令>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**。
770 770  
771 -= 6. FAQ =
737 += 6. 常见问题 =
772 772  
773 773  
774 774  
775 -= 7. Order Info =
741 += 7. 订单信息 =
776 776  
777 777  
778 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
744 +零件号：(% style="color:blue" %)**S31-LB-XX / S31B-LB-XX**
779 779  
780 -(% style="color:red" %)**XX**(%%): The default frequency band
746 +(% style="color:red" %)**XX**(%%) : 默认频段
781 781  
782 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
748 +* (% style="color:red" %)**AS923**(%%) : LoRaWAN AS923 频段
783 783  
784 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
750 +* (% style="color:red" %)**AU915**(%%) : LoRaWAN AU915 频段
785 785  
786 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
752 +* (% style="color:red" %)**EU433**(%%) : LoRaWAN EU433 频段
787 787  
788 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
754 +* (% style="color:red" %)**EU868**(%%) : LoRaWAN EU868 频段
789 789  
790 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
756 +* (% style="color:red" %)**KR920**(%%) : LoRaWAN KR920 频段
791 791  
792 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
758 +* (% style="color:red" %)**US915**(%%) : LoRaWAN US915 频段
793 793  
794 -* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
760 +* (% style="color:red" %)**IN865**(%%) : LoRaWAN IN865 频段
795 795  
796 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
762 +* (% style="color:red" %)**CN470**(%%) : LoRaWAN CN470 频段
797 797  
798 -= 8. ​Packing Info =
764 += 8. 包装信息 =
799 799  
800 800  
801 -(% style="color:#037691" %)**Package Includes**:
767 +(% style="color:#037691" %)**套餐包括**：
802 802  
803 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
769 +* S31x-LB LoRaWAN 温湿度传感器
804 804  
805 -(% style="color:#037691" %)**Dimension and weight**:
771 +(% style="color:#037691" %)**尺寸和重量**：
806 806  
807 -* Device Size: cm
773 +* 设备尺寸：cm
808 808  
809 -* Device Weight: g
775 +* 设备重量：g
810 810  
811 -* Package Size / pcs : cm
777 +* 包装尺寸/个 : cm
812 812  
813 -* Weight / pcs : g
779 +* 重量/个：克
814 814  
815 -= 9. Support =
781 += 9.支持 =
816 816  
817 817  
818 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
784 +* 周一至周五的 09:00 至 18:00 GMT+8 提供支持。由于时区不同，我们无法提供现场支持。但是，您的问题将在上述时间表中尽快得到解答。
819 819  
820 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
786 +* 提供尽可能多的关于您的询问的信息（产品型号、准确描述您的问题和复制它的步骤等）并发送邮件至 [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
S31.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
S31B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content
image-20230523174230-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -605.9 KB
Content