Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 21 added, 0 removed)
  • image-20230524105433-1.png
  • image-20230524105747-2.png
  • image-20230524110125-3.png
  • image-20230524110211-4.png
  • image-20230524114302-1.png
  • image-20230524114654-2.png
  • image-20230524114826-3.png
  • image-20230524144422-1.png
  • image-20230524144456-2.png
  • image-20230527093155-1.jpeg
  • image-20230527093214-2.jpeg
  • image-20230530084138-1.jpeg
  • image-20230530084608-2.jpeg
  • image-20230530111051-3.png
  • image-20230530111412-4.png
  • image-20230530135919-1.png
  • image-20230530135929-2.png
  • image-20230530140053-1.jpeg
  • image-20230612170349-1.png
  • image-20230612170943-2.png
  • image-20230612171032-3.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
	1	+DDS75-LB -- LoRaWAN Distance Detection Sensor User Manual

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Saxer
	1	+XWiki.Xiaoling

Content

...	...	@@ -1,5 +1,5 @@
1	1	(% style="text-align:center" %)
2		-[[image:S31-B.jpg]]
	2	+[[image:image-20230612170349-1.png||height="656" width="656"]]
3	3
4	4
5	5
...	...	@@ -15,22 +15,22 @@
15	15
16	16	= 1. Introduction =
17	17
18		-== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
	18	+== 1.1 What is LoRaWAN Distance Detection Sensor ==
19	19
20	20
21		-The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
	21	+The Dragino DDS75-LB is a (% style="color:blue" %)** LoRaWAN Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:blue" %)** ultrasonic sensing technology**(%%) for (% style="color:blue" %)**distance measurement**(%%), and (% style="color:blue" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The DDS75-LB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
22	22
23		-The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
	23	+It detects the distance(% style="color:blue" %)**  between the measured object and the sensor**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
24	24
25		-The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	25	+The LoRa wireless technology used in SW3L-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26	26
27		-S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
	27	+SW3L-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
28	28
29		-S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
	29	+SW3L-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
30	30
31		-S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	31	+Each SW3L-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
32	32
33		-Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	33	+[[image:image-20230612170943-2.png||height="525" width="912"]]
34	34
35	35
36	36	== 1.2 ​Features ==
...	...	@@ -37,39 +37,54 @@
37	37
38	38
39	39	* LoRaWAN 1.0.3 Class A
40		-* Ultra-low power consumption
41		-* External 3 meters SHT31 probe (For S31-LB)
42		-* Measure range -55°C ~~ 125°C
43		-* Temperature & Humidity alarm
44	44	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	41	+* Ultra-low power consumption
	42	+* Distance Detection by Ultrasonic technology
	43	+* Flat object range 280mm - 7500mm
	44	+* Accuracy: ±(1cm+S*0.3%) (S: Distance)
	45	+* Cable Length : 25cm
45	45	* Support Bluetooth v5.1 and LoRaWAN remote configure
46	46	* Support wireless OTA update firmware
47		-* Uplink on periodically
	48	+* AT Commands to change parameters
48	48	* Downlink to change configure
	50	+* IP66 Waterproof Enclosure
49	49	* 8500mAh Battery for long term use
50	50
51	51	== 1.3 Specification ==
52	52
53	53
54		-(% style="color:#037691" %)**Common DC Characteristics:**
	56	+(% style="color:#037691" %)**Rated environmental conditions:**
55	55
56		-* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
57		-* Operating Temperature: -40 ~~ 85°C
	58	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
	59	+|(% style="background-color:#d9e2f3; color:#0070c0; width:163px" %)**Item**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)(((
	60	+**Minimum value**
	61	+)))|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)(((
	62	+**Typical value**
	63	+)))|(% style="background-color:#d9e2f3; color:#0070c0; width:87px" %)(((
	64	+**Maximum value**
	65	+)))|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Unit**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Remarks**
	66	+|(% style="width:174px" %)Storage temperature|(% style="width:86px" %)-25|(% style="width:66px" %)25|(% style="width:90px" %)80|(% style="width:48px" %)℃|(% style="width:203px" %)
	67	+|(% style="width:174px" %)Storage humidity|(% style="width:86px" %) |(% style="width:66px" %)65%|(% style="width:90px" %)90%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
	68	+|(% style="width:174px" %)Operating temperature|(% style="width:86px" %)-15|(% style="width:66px" %)25|(% style="width:90px" %)60|(% style="width:48px" %)℃|(% style="width:203px" %)
	69	+|(% style="width:174px" %)Working humidity|(% style="width:86px" %)(((
	70	+
58	58
59		-(% style="color:#037691" %)**Temperature Sensor:**
	72	+
	73	+)))|(% style="width:66px" %)65%|(% style="width:90px" %)80%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
60	60
61		-* Range: -40 to + 80°C
62		-* Accuracy: ±0.2 @ 0-90 °C
63		-* Resolution: 0.1°C
64		-* Long Term Shift: <0.03 °C/yr
	75	+(((
	76	+**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);       **
65	65
66		-(% style="color:#037691" %)**Humidity Sensor: **
	78	+**~ b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
67	67
68		-* Range: 0 ~~ 99.9% RH
69		-* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
70		-* Resolution: 0.01% RH
71		-* Long Term Shift: <0.25 %RH/yr
	80	+
	81	+)))
72	72
	83	+(% style="color:#037691" %)**Common DC Characteristics:**
	84	+
	85	+* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
	86	+* Operating Temperature: -40 ~~ 85°C
	87	+
73	73	(% style="color:#037691" %)**LoRa Spec:**
74	74
75	75	* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
...	...	@@ -90,15 +90,41 @@
90	90	* Sleep Mode: 5uA @ 3.3v
91	91	* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
92	92
93		-== 1.4 Sleep mode and working mode ==
	108	+== 1.4 Effective measurement range Reference beam pattern ==
94	94
95	95
	111	+**~1. The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
	112	+
	113	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852253176-749.png?rev=1.1||alt="1654852253176-749.png"]]
	114	+
	115	+
	116	+**2. The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
	117	+
	118	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852175653-550.png?rev=1.1||alt="1654852175653-550.png"]]
	119	+
	120	+
	121	+== 1.5 Applications ==
	122	+
	123	+
	124	+* Horizontal distance measurement
	125	+* Liquid level measurement
	126	+* Parking management system
	127	+* Object proximity and presence detection
	128	+* Intelligent trash can management system
	129	+* Robot obstacle avoidance
	130	+* Automatic control
	131	+* Sewer
	132	+* Bottom water level monitoring
	133	+
	134	+== 1.6 Sleep mode and working mode ==
	135	+
	136	+
96	96	(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97	97
98	98	(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
99	99
100	100
101		-== 1.5 Button & LEDs ==
	142	+== 1.7 Button & LEDs ==
102	102
103	103
104	104	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
...	...	@@ -117,10 +117,10 @@
117	117	)))
118	118	|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
119	119
120		-== 1.6 BLE connection ==
	161	+== 1.8 BLE connection ==
121	121
122	122
123		-S31x-LB support BLE remote configure.
	164	+DDS75-LB support BLE remote configure.
124	124
125	125
126	126	BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
...	...	@@ -132,54 +132,45 @@
132	132	If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133	133
134	134
135		-== 1.7 Pin Definitions ==
	176	+== 1.9 Pin Definitions ==
136	136
137	137	[[image:image-20230523174230-1.png]]
138	138
139		-(% class="wikigeneratedid" %)
	180	+
140	140	== ==
141	141
142		-== 1.8  Hardware Variant ==
	183	+== 2.10 Mechanical ==
143	143
144	144
145		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
146		-|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
147		-|(% style="width:102px" %)S31-LB|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
148		-1 x SHT31 Probe
	186	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
149	149
150		-Cable Length : 2 meters
151	151
152		-
153		-)))
154		-|(% style="width:102px" %)S31B-LB|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
155		-1 x SHT31 Probe
	189	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
156	156
157		-Installed in device.
158		-)))
159	159
160		-(% style="display:none" %)
	192	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
161	161
162	162
	195	+**Probe Mechanical:**
163	163
164		-== 1.9 Mechanical ==
165	165
	198	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-1.png?rev=1.1||alt="image-20220610172003-1.png"]]
166	166
167		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
168	168
	201	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
169	169
170		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
171	171
	204	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610172003-2.png?rev=1.1||alt="image-20220610172003-2.png"]]
172	172
173		-[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
174	174
	207	+= 2. Configure DDS75-LB to connect to LoRaWAN network =
175	175
176		-= 2. Configure S31x-LB to connect to LoRaWAN network =
177		-
178	178	== 2.1 How it works ==
179	179
180	180
181		-The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	212	+The DDS75-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS75-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
182	182
	214	+(% style="display:none" %) (%%)
183	183
184	184	== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
185	185
...	...	@@ -186,13 +186,15 @@
186	186
187	187	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
188	188
189		-The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	221	+The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
190	190
	223	+[[image:image-20230612171032-3.png||height="492" width="855"]](% style="display:none" %)
191	191
192		-(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
193	193
194		-Each S31x-LB is shipped with a sticker with the default device EUI as below:
	226	+(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS75-LB.
195	195
	228	+Each DDS75-LB is shipped with a sticker with the default device EUI as below:
	229	+
196	196	[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
197	197
198	198
...	...	@@ -220,10 +220,10 @@
220	220	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
221	221
222	222
223		-(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
	257	+(% style="color:blue" %)**Step 2:**(%%) Activate on DDS75-LB
224	224
225	225
226		-Press the button for 5 seconds to activate the S31x-LB.
	260	+Press the button for 5 seconds to activate the DDS75-LB.
227	227
228	228	(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
229	229
...	...	@@ -230,174 +230,189 @@
230	230	After join success, it will start to upload messages to TTN and you can see the messages in the panel.
231	231
232	232
233		-== 2.3 ​Uplink Payload ==
	267	+== 2.3  ​Uplink Payload ==
234	234
235		-=== 2.3.1 Device Status, FPORT~=5 ===
236	236
	270	+(((
	271	+(((
	272	+DDS75-LB will uplink payload via LoRaWAN with below payload format:
	273	+)))
237	237
238		-Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
	275	+(((
	276	+Uplink payload includes in total 4 bytes.
	277	+Payload for firmware version v1.1.4. . Before v1.1.3, there is on two fields: BAT and Distance
	278	+)))
	279	+)))
239	239
240		-The Payload format is as below.
	281	+(((
	282	+
	283	+)))
241	241
	285	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
	286	+|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
	287	+**Size(bytes)**
	288	+)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
	289	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
	290	+[[Distance>>||anchor="H2.3.2A0Distance"]]
	291	+(unit: mm)
	292	+)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
	293	+[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
	294	+)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
242	242
243		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
244		-|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
245		-|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
246		-|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
	296	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
247	247
248		-Example parse in TTNv3
249	249
250		-[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
	299	+=== 2.3.1  Battery Info ===
251	251
252	252
253		-(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
	302	+Check the battery voltage for DDS75-LB.
254	254
255		-(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
	304	+Ex1: 0x0B45 = 2885mV
256	256
257		-(% style="color:#037691" %)**Frequency Band**:
	306	+Ex2: 0x0B49 = 2889mV
258	258
259		-*0x01: EU868
260	260
261		-*0x02: US915
	309	+=== 2.3.2  Distance ===
262	262
263		-*0x03: IN865
264	264
265		-*0x04: AU915
	312	+(((
	313	+Get the distance. Flat object range 280mm - 7500mm.
	314	+)))
266	266
267		-*0x05: KZ865
	316	+(((
	317	+For example, if the data you get from the register is 0x0B 0x05, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
268	268
269		-*0x06: RU864
	319	+(% style="color:#4472c4" %)**0B05(H) = 2821 (D) = 2821 mm.**
	320	+)))
270	270
271		-*0x07: AS923
272	272
273		-*0x08: AS923-1
	323	+* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
	324	+* If the sensor value lower than 0x0118 (280mm), the sensor value will be invalid. Since v1.1.4, all value lower than 280mm will be set to 0x0014(20mm) which means the value is invalid.
274	274
275		-*0x09: AS923-2
	326	+=== 2.3.3  Interrupt Pin ===
276	276
277		-*0x0a: AS923-3
278	278
279		-*0x0b: CN470
	329	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3A0SetInterruptMode"]] for the hardware and software set up.
280	280
281		-*0x0c: EU433
	331	+**Example:**
282	282
283		-*0x0d: KR920
	333	+0x00: Normal uplink packet.
284	284
285		-*0x0e: MA869
	335	+0x01: Interrupt Uplink Packet.
286	286
287	287
288		-(% style="color:#037691" %)**Sub-Band**:
	338	+=== 2.3.4  DS18B20 Temperature sensor ===
289	289
290		-AU915 and US915:value 0x00 ~~ 0x08
291	291
292		-CN470: value 0x0B ~~ 0x0C
	341	+This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
293	293
294		-Other Bands: Always 0x00
	343	+**Example**:
295	295
	345	+If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
296	296
297		-(% style="color:#037691" %)**Battery Info**:
	347	+If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
298	298
299		-Check the battery voltage.
	349	+(% style="color:red" %)**Note: DS18B20 feature is supported in the hardware version > v1.3 which made since early of 2021.**
300	300
301		-Ex1: 0x0B45 = 2885mV
302	302
303		-Ex2: 0x0B49 = 2889mV
	352	+=== 2.3.5  Sensor Flag ===
304	304
305	305
306		-=== 2.3.2  Sensor Data. FPORT~=2 ===
	355	+(((
	356	+0x01: Detect Ultrasonic Sensor
	357	+)))
307	307
308		-
309		-Sensor Data is uplink via FPORT=2
310		-
311		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
312		-|=(% style="width: 90px;background-color:#D9E2F3" %)(((
313		-**Size(bytes)**
314		-)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
315		-|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
316		-[[Battery>>||anchor="HBattery"]]
317		-)))|(% style="width:130px" %)(((
318		-[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
319		-)))|(% style="width:91px" %)(((
320		-[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
321		-)))|(% style="width:103px" %)(((
322		-[[Temperature>>||anchor="HTemperature"]]
323		-)))|(% style="width:80px" %)(((
324		-[[Humidity>>||anchor="HHumidity"]]
	359	+(((
	360	+0x00: No Ultrasonic Sensor
325	325	)))
326	326
327		-==== (% style="color:#4472c4" %)**Battery**(%%) ====
328	328
329		-Sensor Battery Level.
	364	+=== 2.3.6  Decode payload in The Things Network ===
330	330
331		-Ex1: 0x0B45 = 2885mV
332	332
333		-Ex2: 0x0B49 = 2889mV
	367	+While using TTN network, you can add the payload format to decode the payload.
334	334
	369	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
335	335
	371	+The payload decoder function for TTN V3 is here:
336	336
337		-==== (% style="color:#4472c4" %)**Temperature**(%%) ====
	373	+(((
	374	+DDS75-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
	375	+)))
338	338
339		-**Example**:
340	340
341		-If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
	378	+== 2.4  Uplink Interval ==
342	342
343		-If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
344	344
345		-（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
	381	+The DDS75-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
346	346
347	347
348		-==== (% style="color:#4472c4" %)**Humidity**(%%) ====
	384	+== 2.5  ​Show Data in DataCake IoT Server ==
349	349
350	350
351		-Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
	387	+(((
	388	+[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	389	+)))
352	352
	391	+(((
	392	+
	393	+)))
353	353
354		-==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
	395	+(((
	396	+(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	397	+)))
355	355
	399	+(((
	400	+(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	401	+)))
356	356
357		-**Example:**
358	358
359		-If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
	404	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
360	360
361		-If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
362	362
363		-If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
	407	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
364	364
365		-If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
366	366
	410	+(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
367	367
368		-== 2.4 Payload Decoder file ==
	412	+(% style="color:blue" %)**Step 4**(%%)**: Search the DDS75-LB and add DevEUI.**
369	369
	414	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
370	370
371		-In TTN, use can add a custom payload so it shows friendly reading
372	372
373		-In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
	417	+After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
374	374
375		-[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
	419	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
376	376
377	377
378		-== 2.5 Datalog Feature ==
379	379
	423	+== 2.6 Datalog Feature ==
380	380
381		-Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
382	382
	426	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS75-LB will store the reading for future retrieving purposes.
383	383
384		-=== 2.5.1 Ways to get datalog via LoRaWAN ===
385	385
	429	+=== 2.6.1 Ways to get datalog via LoRaWAN ===
386	386
387		-Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
388	388
389		-* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
390		-* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
	432	+Set PNACKMD=1, DDS75-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS75-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
391	391
	434	+* (((
	435	+a) DDS75-LB will do an ACK check for data records sending to make sure every data arrive server.
	436	+)))
	437	+* (((
	438	+b) DDS75-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS75-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS75-LB gets a ACK, DDS75-LB will consider there is a network connection and resend all NONE-ACK messages.
	439	+)))
	440	+
392	392	Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
393	393
394	394	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
395	395
396	396
397		-=== 2.5.2 Unix TimeStamp ===
	446	+=== 2.6.2 Unix TimeStamp ===
398	398
399	399
400		-S31x-LB uses Unix TimeStamp format based on
	449	+DDS75-LB uses Unix TimeStamp format based on
401	401
402	402	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
403	403
...	...	@@ -411,134 +411,62 @@
411	411	So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
412	412
413	413
414		-=== 2.5.3 Set Device Time ===
	463	+=== 2.6.3 Set Device Time ===
415	415
416	416
417	417	User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
418	418
419		-Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	468	+Once DDS75-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to SW3L-LB. If DDS75-LB fails to get the time from the server, DDS75-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
420	420
421	421	(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
422	422
423	423
424		-=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
	473	+=== 2.6.4 Poll sensor value ===
425	425
426	426
427		-The Datalog uplinks will use below payload format.
	476	+Users can poll sensor values based on timestamps. Below is the downlink command.
428	428
429		-**Retrieval data payload:**
	478	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
	479	+|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
	480	+|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
	481	+|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
430	430
431		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
432		-|=(% style="width: 80px;background-color:#D9E2F3" %)(((
433		-**Size(bytes)**
434		-)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
435		-|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
436		-Temp_Black
437		-)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
438		-
439		-**Poll message flag & Ext:**
440		-
441		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
442		-
443		-**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
444		-
445		-**Poll Message Flag**: 1: This message is a poll message reply.
446		-
447		-* Poll Message Flag is set to 1.
448		-
449		-* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
450		-
451		-For example, in US915 band, the max payload for different DR is:
452		-
453		-**a) DR0:** max is 11 bytes so one entry of data
454		-
455		-**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
456		-
457		-**c) DR2:** total payload includes 11 entries of data
458		-
459		-**d) DR3: **total payload includes 22 entries of data.
460		-
461		-If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
462		-
463		-
464		-**Example:**
465		-
466		-If S31x-LB has below data inside Flash:
467		-
468		-[[image:1682646494051-944.png]]
469		-
470		-If user sends below downlink command: 3160065F9760066DA705
471		-
472		-Where : Start time: 60065F97 = time 21/1/19 04:27:03
473		-
474		- Stop time: 60066DA7= time 21/1/19 05:27:03
475		-
476		-
477		-**S31x-LB will uplink this payload.**
478		-
479		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
480		-
481	481	(((
482		-__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
	484	+Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
483	483	)))
484	484
485	485	(((
486		-Where the first 11 bytes is for the first entry:
	488	+For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
487	487	)))
488	488
489	489	(((
490		-7FFF089801464160065F97
	492	+Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
491	491	)))
492	492
493	493	(((
494		-**Ext sensor data**=0x7FFF/100=327.67
	496	+Uplink Internal =5s，means DDS75-LB will send one packet every 5s. range 5~~255s.
495	495	)))
496	496
497		-(((
498		-**Temp**=0x088E/100=22.00
499		-)))
500	500
501		-(((
502		-**Hum**=0x014B/10=32.6
503		-)))
504		-
505		-(((
506		-**poll message flag & Ext**=0x41,means reply data,Ext=1
507		-)))
508		-
509		-(((
510		-**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
511		-)))
512		-
513		-
514		-(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
515		-
516		-== 2.6 Temperature Alarm Feature ==
517		-
518		-
519		-S31x-LB work flow with Alarm feature.
520		-
521		-
522		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
523		-
524		-
525	525	== 2.7 Frequency Plans ==
526	526
527	527
528		-The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
	503	+The DDS75-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
529	529
530	530	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
531	531
532	532
533		-= 3. Configure S31x-LB =
	508	+= 3. Configure SW3L-LB =
534	534
535	535	== 3.1 Configure Methods ==
536	536
537	537
538		-S31x-LB supports below configure method:
	513	+DDS75-LB supports below configure method:
539	539
540	540	* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
	516	+
541	541	* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
	518	+
542	542	* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
543	543
544	544	== 3.2 General Commands ==
...	...	@@ -547,6 +547,7 @@
547	547	These commands are to configure:
548	548
549	549	* General system settings like: uplink interval.
	527	+
550	550	* LoRaWAN protocol & radio related command.
551	551
552	552	They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
...	...	@@ -554,21 +554,25 @@
554	554	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
555	555
556	556
557		-== 3.3 Commands special design for S31x-LB ==
	535	+== 3.3 Commands special design for DDS75-LB ==
558	558
559	559
560		-These commands only valid for S31x-LB, as below:
	538	+These commands only valid for DDS75-LB, as below:
561	561
562	562
563	563	=== 3.3.1 Set Transmit Interval Time ===
564	564
565	565
	544	+(((
566	566	Feature: Change LoRaWAN End Node Transmit Interval.
	546	+)))
567	567
	548	+(((
568	568	(% style="color:blue" %)**AT Command: AT+TDC**
	550	+)))
569	569
570	570	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
571		-|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
	553	+|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
572	572	|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
573	573	30000
574	574	OK
...	...	@@ -579,108 +579,37 @@
579	579	Set transmit interval to 60000ms = 60 seconds
580	580	)))
581	581
	564	+(((
582	582	(% style="color:blue" %)**Downlink Command: 0x01**
	566	+)))
583	583
	568	+(((
584	584	Format: Command Code (0x01) followed by 3 bytes time value.
	570	+)))
585	585
	572	+(((
586	586	If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	574	+)))
587	587
588		-* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
589		-* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
	576	+* (((
	577	+Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
	578	+)))
	579	+* (((
	580	+Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
	581	+)))
590	590
591		-=== 3.3.2 Get Device Status ===
592	592
	584	+=== 3.3.2 Set Interrupt Mode ===
593	593
594		-Send a LoRaWAN downlink to ask device send Alarm settings.
595	595
596		-(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
597		-
598		-Sensor will upload Device Status via FPORT=5. See payload section for detail.
599		-
600		-
601		-=== 3.3.3 Set Temperature Alarm Threshold ===
602		-
603		-
604		-* (% style="color:blue" %)**AT Command:**
605		-
606		-(% style="color:#037691" %)**AT+SHTEMP=min,max**
607		-
608		-* When min=0, and max≠0, Alarm higher than max
609		-* When min≠0, and max=0, Alarm lower than min
610		-* When min≠0 and max≠0, Alarm higher than max or lower than min
611		-
612		-Example:
613		-
614		- AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
615		-
616		-* (% style="color:blue" %)**Downlink Payload:**
617		-
618		-(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
619		-
620		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
621		-
622		-
623		-=== 3.3.4 Set Humidity Alarm Threshold ===
624		-
625		-
626		-* (% style="color:blue" %)**AT Command:**
627		-
628		-(% style="color:#037691" %)**AT+SHHUM=min,max**
629		-
630		-* When min=0, and max≠0, Alarm higher than max
631		-* When min≠0, and max=0, Alarm lower than min
632		-* When min≠0 and max≠0, Alarm higher than max or lower than min
633		-
634		-Example:
635		-
636		- AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
637		-
638		-* (% style="color:blue" %)**Downlink Payload:**
639		-
640		-(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
641		-
642		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
643		-
644		-
645		-=== 3.3.5 Set Alarm Interval ===
646		-
647		-
648		-The shortest time of two Alarm packet. (unit: min)
649		-
650		-* (% style="color:blue" %)**AT Command:**
651		-
652		-(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
653		-
654		-* (% style="color:blue" %)**Downlink Payload:**
655		-
656		-(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
657		-
658		-
659		-=== 3.3.6 Get Alarm settings ===
660		-
661		-
662		-Send a LoRaWAN downlink to ask device send Alarm settings.
663		-
664		-* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
665		-
666		-**Example:**
667		-
668		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
669		-
670		-
671		-**Explain:**
672		-
673		-* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
674		-
675		-=== 3.3.7 Set Interrupt Mode ===
676		-
677		-
678	678	Feature, Set Interrupt mode for PA8 of pin.
679	679
	589	+When AT+INTMOD=0 is set, PA8 is used as a digital input port.
	590	+
680	680	(% style="color:blue" %)**AT Command: AT+INTMOD**
681	681
682	682	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
683		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
	594	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
684	684	|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
685	685	0
686	686	OK
...	...	@@ -701,44 +701,14 @@
701	701	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
702	702
703	703	* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
	615	+
704	704	* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
705	705
706		-=== ===
707	707
708		-=== 3.3.7 Set Power Output Duration ===
709		-
710		-
711		-Control the output duration 5V . Before each sampling, device will
712		-
713		-~1. first enable the power output to external sensor,
714		-
715		-2. keep it on as per duration, read sensor value and construct uplink payload
716		-
717		-3. final, close the power output.
718		-
719		-(% style="color:blue" %)**AT Command: AT+5VT**
720		-
721		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
722		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
723		-|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
724		-OK
725		-|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
726		-
727		-(% style="color:blue" %)**Downlink Command: 0x07**
728		-
729		-Format: Command Code (0x07) followed by 2 bytes.
730		-
731		-The first and second bytes are the time to turn on.
732		-
733		-* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
734		-* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
735		-
736		-= =
737		-
738	738	= 4. Battery & Power Consumption =
739	739
740	740
741		-S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
	622	+DDS75-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
742	742
743	743	[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
744	744
...	...	@@ -747,30 +747,36 @@
747	747
748	748
749	749	(% class="wikigeneratedid" %)
750		-User can change firmware S31x-LB to:
	631	+User can change firmware DDS75-LB to:
751	751
752	752	* Change Frequency band/ region.
	634	+
753	753	* Update with new features.
	636	+
754	754	* Fix bugs.
755	755
756	756	Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
757	757
758		-
759	759	Methods to Update Firmware:
760	760
761	761	* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
	644	+
762	762	* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
763	763
764	764	= 6. FAQ =
765	765
	649	+== 6.1  AT Commands input doesn't work ==
766	766
767	767
	652	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	653	+
	654	+
768	768	= 7. Order Info =
769	769
770	770
771		-Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
	658	+Part Number: (% style="color:blue" %)**SW3L-LB-XXX-YYY**
772	772
773		-(% style="color:red" %)**XX**(%%): The default frequency band
	660	+(% style="color:red" %)**XXX**(%%): The default frequency band
774	774
775	775	* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
776	776
...	...	@@ -788,12 +788,43 @@
788	788
789	789	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
790	790
	678	+(((
	679	+(% style="color:blue" %)**YYY**(%%): Flow Sensor Model:
	680	+)))
	681	+
	682	+(((
	683	+ **004:** DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L
	684	+)))
	685	+
	686	+(((
	687	+ **006:** DW-006 Flow Sensor: diameter: G3/4” / DN20. 390 pulse = 1 L
	688	+)))
	689	+
	690	+(((
	691	+ **010:** DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L
	692	+)))
	693	+
	694	+* (((
	695	+calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
	696	+)))
	697	+
	698	+* (((
	699	+calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
	700	+)))
	701	+
	702	+* (((
	703	+calculate flag=2: for SW3L-010 Flow Sensor: 64  pulse = 1 L
	704	+
	705	+
	706	+
	707	+)))
	708	+
791	791	= 8. ​Packing Info =
792	792
793	793
794	794	(% style="color:#037691" %)**Package Includes**:
795	795
796		-* S31x-LB LoRaWAN Temperature & Humidity Sensor
	714	+* SW3L-LB LoRaWAN Flow Sensor
797	797
798	798	(% style="color:#037691" %)**Dimension and weight**:
799	799

image-20230524105433-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+121.4 KB

Content

image-20230524105747-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+223.2 KB

Content

image-20230524110125-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+194.1 KB

Content

image-20230524110211-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+110.1 KB

Content

image-20230524114302-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.0 KB

Content

image-20230524114654-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.8 KB

Content

image-20230524114826-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.3 KB

Content

image-20230524144422-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.9 KB

Content

image-20230524144456-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.9 KB

Content

image-20230527093155-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+9.3 KB

Content

image-20230527093214-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.7 KB

Content

image-20230530084138-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230530084608-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230530111051-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+85.1 KB

Content

image-20230530111412-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+85.0 KB

Content

image-20230530135919-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+87.6 KB

Content

image-20230530135929-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+87.6 KB

Content

image-20230530140053-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.3 MB

Content

image-20230612170349-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+164.2 KB

Content

image-20230612170943-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+86.4 KB

Content

image-20230612171032-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+86.4 KB

Content