Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 34.1
edited by Xiaoye
on 2023/05/06 15:51
Change comment: There is no comment for this version
To version 62.4
edited by Xiaoling
on 2023/05/30 09:19
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
1 +CPL03-LB -- LoRaWAN Pulse/Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -1,9 +1,7 @@
1 1  (% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
2 +[[image:image-20230530084608-2.jpeg||height="707" width="707"]]
3 3  
4 4  
5 -
6 -
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -15,36 +15,40 @@
15 15  
16 16  = 1. Introduction =
17 17  
18 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
16 +== 1.1 What is CPL03-LB LoRaWAN Pulse/Contact Sensor ==
19 19  
20 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the **surrounding environment temperature and relative air humidity precisely**, and then upload to IoT server via LoRaWAN wireless protocol.
21 21  
22 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a **waterproof anti-condensation casing** for long term use.
19 +The Dragino CPL03-LB is a (% style="color:blue" %)**LoRaWAN Contact Sensor**(%%) for Internet of Things solution. It detects dry contact status, open time, open counts, and then upload to IoT server via LoRaWAN wireless protocol.
23 23  
24 -The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
21 +The CPL03-LB will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
25 25  
26 -S31x-LB supports **Temperature & Humdity alarm feature,** user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
23 +The LoRa wireless technology used in CPL03-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
27 27  
28 -S31x-LB has max 3 probes which measure maximum 3 temperature points.
25 +CPL03-LB (% style="color:blue" %)**supports open alarm feature**(%%), user can set open alarm for instant notice. CPL03-LB (% style="color:blue" %)**supports Datalog feature**(%%), it can save the data when there is no LoRaWAN network and uplink when network recover.
29 29  
30 -S31x-LB **supports BLE configure** and **wireless OTA update** which make user easy to use.
27 +CPL03-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
31 31  
32 -S31x-LB is powered by **8500mAh Li-SOCI2 battery**, it is designed for long term use up to 5 years.
29 +CPL03-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
33 33  
34 -Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +CPL03-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
35 35  
33 +Each CPL03-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
36 36  
35 +
37 37  == 1.2 ​Features ==
38 38  
38 +
39 39  * LoRaWAN 1.0.3 Class A
40 +* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
40 40  * Ultra-low power consumption
41 -* External 3 meters SHT31 probe (For S31-LB)
42 -* Measure range -55°C ~~ 125°C
42 +* Open/Close detect
43 +* Open/Close statistics
43 43  * Temperature & Humidity alarm
44 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
45 +* supports open alarm feature
46 +* supports Datalog feature
45 45  * Support Bluetooth v5.1 and LoRaWAN remote configure
46 46  * Support wireless OTA update firmware
47 -* Uplink on periodically
49 +* Uplink on periodically and open/close event
48 48  * Downlink to change configure
49 49  * 8500mAh Battery for long term use
50 50  
... ... @@ -56,20 +56,6 @@
56 56  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
57 57  * Operating Temperature: -40 ~~ 85°C
58 58  
59 -(% style="color:#037691" %)**Temperature Sensor:**
60 -
61 -* Range: -40 to + 80°C
62 -* Accuracy: ±0.2 @ 0-90 °C
63 -* Resolution: 0.1°C
64 -* Long Term Shift: <0.03 °C/yr
65 -
66 -(% style="color:#037691" %)**Humidity Sensor: **
67 -
68 -* Range: 0 ~~ 99.9% RH
69 -* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
70 -* Resolution: 0.01% RH
71 -* Long Term Shift: <0.25 %RH/yr
72 -
73 73  (% style="color:#037691" %)**LoRa Spec:**
74 74  
75 75  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -90,9 +90,20 @@
90 90  * Sleep Mode: 5uA @ 3.3v
91 91  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
92 92  
93 -== 1.4 Sleep mode and working mode ==
94 94  
95 95  
83 +== 1.4 Applications ==
84 +
85 +
86 +* Open/Close Detection
87 +* Pulse meter application
88 +* Dry Contact Detection
89 +
90 +
91 +
92 +== 1.5 Sleep mode and working mode ==
93 +
94 +
96 96  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97 97  
98 98  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -132,28 +132,11 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7  Hardware Variant ==
134 +== 1.7 Pin Definitions ==
136 136  
136 +[[image:image-20230523174230-1.png]]
137 137  
138 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
139 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
140 -|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
141 -1 x SHT31 Probe
142 142  
143 -Cable Length : 2 meters
144 -
145 -
146 -)))
147 -|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
148 -1 x SHT31 Probe
149 -
150 -Installed in device.
151 -)))
152 -
153 -(% style="display:none" %)
154 -
155 -
156 -
157 157  == 1.8 Mechanical ==
158 158  
159 159  
... ... @@ -240,7 +240,7 @@
240 240  
241 241  Example parse in TTNv3
242 242  
243 -[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
225 +[[image:image-20230524144422-1.png||height="174" width="1080"]]
244 244  
245 245  
246 246  (% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
... ... @@ -302,21 +302,24 @@
302 302  Sensor Data is uplink via FPORT=2
303 303  
304 304  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
305 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
287 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
306 306  **Size(bytes)**
307 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
308 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
309 -[[Battery>>||anchor="HBattery:"]]
289 +)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
290 +|(% style="width:99px" %)Value|(% style="width:69px" %)(((
291 +Battery
310 310  )))|(% style="width:130px" %)(((
311 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
312 -)))|(% style="width:91px" %)(((
313 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
314 -)))|(% style="width:103px" %)(((
315 -[[Temperature>>||anchor="HTemperature:"]]
316 -)))|(% style="width:80px" %)(((
317 -[[Humidity>>||anchor="HHumidity:"]]
293 +Unix TimeStamp
294 +)))|(% style="width:194px" %)(((
295 +Alarm Flag & MOD& Level of PA8
296 +)))|(% style="width:106px" %)(((
297 +Temperature
298 +)))|(% style="width:97px" %)(((
299 +Humidity
318 318  )))
319 319  
302 +[[image:image-20230524144456-2.png||height="180" width="1142"]]
303 +
304 +
320 320  ==== (% style="color:#4472c4" %)**Battery**(%%) ====
321 321  
322 322  Sensor Battery Level.
... ... @@ -344,17 +344,21 @@
344 344  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
345 345  
346 346  
347 -==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
332 +==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
348 348  
349 349  
350 350  **Example:**
351 351  
352 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
337 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
353 353  
354 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
339 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
355 355  
356 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
341 +If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
357 357  
343 +If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
344 +
345 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
346 +
358 358  If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
359 359  
360 360  
... ... @@ -365,7 +365,7 @@
365 365  
366 366  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
367 367  
368 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
357 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
369 369  
370 370  
371 371  == 2.5 Datalog Feature ==
... ... @@ -377,15 +377,20 @@
377 377  === 2.5.1 Ways to get datalog via LoRaWAN ===
378 378  
379 379  
380 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
369 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
381 381  
382 -* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
383 -* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
371 +* (((
372 +a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
373 +)))
374 +* (((
375 +b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
376 +)))
384 384  
385 385  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
386 386  
387 387  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
388 388  
382 +
389 389  === 2.5.2 Unix TimeStamp ===
390 390  
391 391  
... ... @@ -399,6 +399,7 @@
399 399  
400 400  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
401 401  
396 +
402 402  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
403 403  
404 404  
... ... @@ -419,18 +419,31 @@
419 419  
420 420  **Retrieval data payload:**
421 421  
422 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
423 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
417 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
418 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
424 424  **Size(bytes)**
425 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
426 -|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
427 -[[Temp_Black>>||anchor="HTemperatureBlack:"]]
428 -)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
420 +)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
421 +|(% style="width:103px" %)Value|(% style="width:68px" %)(((
422 +ignore
423 +)))|(% style="width:104px" %)(((
424 +(((
425 +Humidity
426 +)))
429 429  
430 -**Poll message flag & Ext:**
428 +(((
429 +
430 +)))
431 +)))|(% style="width:87px" %)(((
432 +Temperature
433 +)))|(% style="width:178px" %)(((
434 +Poll message flag & Alarm Flag& Level of PA8
435 +)))|(% style="width:137px" %)Unix Time Stamp
431 431  
432 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
437 +**Poll message flag & Alarm Flag & Level of PA8:**
433 433  
439 +[[image:image-20230524114302-1.png||height="115" width="736"]]
440 +
441 +
434 434  **No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
435 435  
436 436  **Poll Message Flag**: 1: This message is a poll message reply.
... ... @@ -451,26 +451,26 @@
451 451  
452 452  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
453 453  
454 -
455 455  **Example:**
456 456  
457 457  If S31x-LB has below data inside Flash:
458 458  
459 -[[image:1682646494051-944.png]]
466 +[[image:image-20230524114654-2.png]]
460 460  
461 -If user sends below downlink command: 3160065F9760066DA705
462 462  
463 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
469 +If user sends below downlink command: 31646D84E1646D856C05
464 464  
465 - Stop time: 60066DA7= time 21/1/19 05:27:03
471 +Where : Start time: 646D84E1 = time 23/5/24 03:30:41
466 466  
473 + Stop time: 646D856C= time 23/5/24 03:33:00
467 467  
475 +
468 468  **S31x-LB will uplink this payload.**
469 469  
470 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
478 +[[image:image-20230524114826-3.png||height="448" width="1244"]]
471 471  
472 472  (((
473 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
481 +00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
474 474  )))
475 475  
476 476  (((
... ... @@ -478,30 +478,26 @@
478 478  )))
479 479  
480 480  (((
481 -7FFF089801464160065F97
489 +00 00 02 36 01 10 40 64 6D 84 E1
482 482  )))
483 483  
484 484  (((
485 -**Ext sensor data**=0x7FFF/100=327.67
493 +**Hum**=0x0236/10=56.6
486 486  )))
487 487  
488 488  (((
489 -**Temp**=0x088E/100=22.00
497 +**Temp**=0x0110/10=27.2
490 490  )))
491 491  
492 492  (((
493 -**Hum**=0x014B/10=32.6
501 +**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
494 494  )))
495 495  
496 496  (((
497 -**poll message flag & Ext**=0x41,means reply data,Ext=1
505 +**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
498 498  )))
499 499  
500 -(((
501 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
502 -)))
503 503  
504 -
505 505  (% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
506 506  
507 507  == 2.6 Temperature Alarm Feature ==
... ... @@ -510,9 +510,10 @@
510 510  S31x-LB work flow with Alarm feature.
511 511  
512 512  
513 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
517 +[[image:image-20230524110125-3.png||height="768" width="1115"]]
514 514  
515 515  
520 +
516 516  == 2.7 Frequency Plans ==
517 517  
518 518  
... ... @@ -591,6 +591,7 @@
591 591  
592 592  === 3.3.3 Set Temperature Alarm Threshold ===
593 593  
599 +
594 594  * (% style="color:blue" %)**AT Command:**
595 595  
596 596  (% style="color:#037691" %)**AT+SHTEMP=min,max**
... ... @@ -612,6 +612,7 @@
612 612  
613 613  === 3.3.4 Set Humidity Alarm Threshold ===
614 614  
621 +
615 615  * (% style="color:blue" %)**AT Command:**
616 616  
617 617  (% style="color:#037691" %)**AT+SHHUM=min,max**
... ... @@ -633,6 +633,7 @@
633 633  
634 634  === 3.3.5 Set Alarm Interval ===
635 635  
643 +
636 636  The shortest time of two Alarm packet. (unit: min)
637 637  
638 638  * (% style="color:blue" %)**AT Command:**
... ... @@ -653,9 +653,8 @@
653 653  
654 654  **Example:**
655 655  
656 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
664 +[[image:image-20230524110211-4.png]]
657 657  
658 -
659 659  **Explain:**
660 660  
661 661  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
... ... @@ -663,12 +663,14 @@
663 663  === 3.3.7 Set Interrupt Mode ===
664 664  
665 665  
666 -Feature, Set Interrupt mode for GPIO_EXIT.
673 +Feature, Set Interrupt mode for PA8 of pin.
667 667  
675 +When AT+INTMOD=0 is set, PA8 is used as a digital input port.
676 +
668 668  (% style="color:blue" %)**AT Command: AT+INTMOD**
669 669  
670 670  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
671 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
680 +|=(% style="width: 155px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3" %)**Response**
672 672  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
673 673  0
674 674  OK
... ... @@ -691,6 +691,34 @@
691 691  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
692 692  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
693 693  
703 +=== 3.3.8 Set Power Output Duration ===
704 +
705 +
706 +Control the output duration 5V . Before each sampling, device will
707 +
708 +~1. first enable the power output to external sensor,
709 +
710 +2. keep it on as per duration, read sensor value and construct uplink payload
711 +
712 +3. final, close the power output.
713 +
714 +(% style="color:blue" %)**AT Command: AT+5VT**
715 +
716 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
717 +|=(% style="width: 155px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3" %)**Response**
718 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
719 +OK
720 +|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
721 +
722 +(% style="color:blue" %)**Downlink Command: 0x07**
723 +
724 +Format: Command Code (0x07) followed by 2 bytes.
725 +
726 +The first and second bytes are the time to turn on.
727 +
728 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
729 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
730 +
694 694  = 4. Battery & Power Consumption =
695 695  
696 696  
... ... @@ -715,7 +715,7 @@
715 715  Methods to Update Firmware:
716 716  
717 717  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
718 -* Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
755 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
719 719  
720 720  = 6. FAQ =
721 721  
... ... @@ -724,35 +724,34 @@
724 724  = 7. Order Info =
725 725  
726 726  
727 -Part Number: **S31-LB-XX  / S31B-LB-XX**
764 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
728 728  
729 -**XX**: The default frequency band
766 +(% style="color:red" %)**XX**(%%): The default frequency band
730 730  
731 -* **AS923**: LoRaWAN AS923 band
768 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
732 732  
733 -* **AU915**: LoRaWAN AU915 band
770 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
734 734  
735 -* **EU433**: LoRaWAN EU433 band
772 +* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
736 736  
737 -* **EU868**: LoRaWAN EU868 band
774 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
738 738  
739 -* **KR920**: LoRaWAN KR920 band
776 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
740 740  
741 -* **US915**: LoRaWAN US915 band
778 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
742 742  
743 -* **IN865**: LoRaWAN IN865 band
780 +* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
744 744  
745 -* **CN470**: LoRaWAN CN470 band
782 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
746 746  
747 -= =
748 -
749 749  = 8. ​Packing Info =
750 750  
751 -**Package Includes**:
752 752  
787 +(% style="color:#037691" %)**Package Includes**:
788 +
753 753  * S31x-LB LoRaWAN Temperature & Humidity Sensor
754 754  
755 -**Dimension and weight**:
791 +(% style="color:#037691" %)**Dimension and weight**:
756 756  
757 757  * Device Size: cm
758 758  
... ... @@ -766,4 +766,5 @@
766 766  
767 767  
768 768  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
769 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
805 +
806 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
S31.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.7 KB
Content
S31B.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.5 KB
Content
image-20230523174230-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +605.9 KB
Content
image-20230524105433-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.4 KB
Content
image-20230524105747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +223.2 KB
Content
image-20230524110125-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +194.1 KB
Content
image-20230524110211-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20230524114302-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
image-20230524114654-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.8 KB
Content
image-20230524114826-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +82.3 KB
Content
image-20230524144422-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.9 KB
Content
image-20230524144456-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.9 KB
Content
image-20230527093155-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.3 KB
Content
image-20230527093214-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20230530084138-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20230530084608-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content