Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 19 added, 0 removed)
  • 1682646494051-944.png
  • S31-B.jpg
  • S31.jpg
  • S31B.jpg
  • image-20230426084152-1.png
  • image-20230523174230-1.png
  • image-20230524105433-1.png
  • image-20230524105747-2.png
  • image-20230524110125-3.png
  • image-20230524110211-4.png
  • image-20230524114302-1.png
  • image-20230524114654-2.png
  • image-20230524114826-3.png
  • image-20230524144422-1.png
  • image-20230524144456-2.png
  • image-20230527093155-1.jpeg
  • image-20230527093214-2.jpeg
  • image-20230530084138-1.jpeg
  • image-20230530084608-2.jpeg

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
	1	+CPL03-LB -- LoRaWAN Pulse/Contact Sensor User Manual

Content

...	...	@@ -1,4 +1,5 @@
1		-
	1	+(% style="text-align:center" %)
	2	+[[image:image-20230530084608-2.jpeg||height="707" width="707"]]
2	2
3	3
4	4	**Table of Contents：**
...	...	@@ -12,58 +12,43 @@
12	12
13	13	= 1. Introduction =
14	14
15		-== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
	16	+== 1.1 What is CPL03-LB LoRaWAN Pulse/Contact Sensor ==
16	16
17	17
18		-(((
19		-The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
20		-)))
	19	+The Dragino CPL03-LB is a (% style="color:blue" %)**LoRaWAN Contact Sensor**(%%) for Internet of Things solution. It detects dry contact status, open time, open counts, and then upload to IoT server via LoRaWAN wireless protocol.
21	21
22		-(((
23		-The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24		-)))
	21	+The CPL03-LB will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
25	25
26		-(((
27		-The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28		-)))
	23	+The LoRa wireless technology used in CPL03-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
29	29
30		-(((
31		-S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
32		-)))
	25	+CPL03-LB (% style="color:blue" %)**supports open alarm feature**(%%), user can set open alarm for instant notice. CPL03-LB (% style="color:blue" %)**supports Datalog feature**(%%), it can save the data when there is no LoRaWAN network and uplink when network recover.
33	33
34		-(((
35		-S31x-LB has max 3 probes which measure maximum 3 temperature points.
36		-)))
	27	+CPL03-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
37	37
38		-(((
39		-S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
40		-)))
	29	+CPL03-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
41	41
42		-(((
43		-S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
44		-)))
	31	+CPL03-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
45	45
46		-(((
47		-Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
48		-)))
	33	+Each CPL03-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
49	49
50	50
51	51	== 1.2 ​Features ==
52	52
	38	+
53	53	* LoRaWAN 1.0.3 Class A
	40	+* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
54	54	* Ultra-low power consumption
55		-* External 3 meters SHT31 probe (For S31-LB)
56		-* Measure range -55°C ~~ 125°C
	42	+* Open/Close detect
	43	+* Open/Close statistics
57	57	* Temperature & Humidity alarm
58		-* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	45	+* supports open alarm feature
	46	+* supports Datalog feature
59	59	* Support Bluetooth v5.1 and LoRaWAN remote configure
60	60	* Support wireless OTA update firmware
61		-* Uplink on periodically
	49	+* Uplink on periodically and open/close event
62	62	* Downlink to change configure
63	63	* 8500mAh Battery for long term use
64	64
65		-
66		-
67	67	== 1.3 Specification ==
68	68
69	69
...	...	@@ -72,20 +72,6 @@
72	72	* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
73	73	* Operating Temperature: -40 ~~ 85°C
74	74
75		-(% style="color:#037691" %)**Temperature Sensor:**
76		-
77		-* Range: -40 to + 80°C
78		-* Accuracy: ±0.2 @ 0-90 °C
79		-* Resolution: 0.1°C
80		-* Long Term Shift: <0.03 °C/yr
81		-
82		-(% style="color:#037691" %)**Humidity Sensor: **
83		-
84		-* Range: 0 ~~ 99.9% RH
85		-* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
86		-* Resolution: 0.01% RH
87		-* Long Term Shift: <0.25 %RH/yr
88		-
89	89	(% style="color:#037691" %)**LoRa Spec:**
90	90
91	91	* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
...	...	@@ -106,17 +106,22 @@
106	106	* Sleep Mode: 5uA @ 3.3v
107	107	* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
108	108
	81	+== 1.4 Applications ==
109	109
110	110
111		-== 1.4 Sleep mode and working mode ==
	84	+* Open/Close Detection
	85	+* Pulse meter application
	86	+* Dry Contact Detection
112	112
	88	+== 1.5 Sleep mode and working mode ==
113	113
	90	+
114	114	(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
115	115
116	116	(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
117	117
118	118
119		-== 1.5 Button & LEDs ==
	96	+== 1.6 Button & LEDs ==
120	120
121	121
122	122	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
...	...	@@ -135,14 +135,12 @@
135	135	)))
136	136	|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
137	137
	115	+== 1.7 BLE connection ==
138	138
139	139
140		-== 1.6 BLE connection ==
	118	+CPL03-LB support BLE remote configure.
141	141
142	142
143		-D2x-LB support BLE remote configure.
144		-
145		-
146	146	BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
147	147
148	148	* Press button to send an uplink
...	...	@@ -152,31 +152,14 @@
152	152	If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
153	153
154	154
155		-== 1.7  Hardware Variant ==
	130	+== 1.8 Pin Definitions ==
156	156
	132	+[[image:image-20230523174230-1.png]]
157	157
158		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
159		-|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
160		-|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
161		-1 x SHT31 Probe
162	162
163		-Cable Length : 2 meters
	135	+== 1.9 Mechanical ==
164	164
165		-
166		-)))
167		-|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
168		-1 x SHT31 Probe
169	169
170		-Installed in device.
171		-)))
172		-
173		-(% style="display:none" %)
174		-
175		-
176		-
177		-== 1.8 Mechanical ==
178		-
179		-
180	180	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
181	181
182	182
...	...	@@ -186,12 +186,12 @@
186	186	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
187	187
188	188
189		-= 2. Configure S31x-LB to connect to LoRaWAN network =
	147	+= 2. Configure CPL03-LB to connect to LoRaWAN network =
190	190
191	191	== 2.1 How it works ==
192	192
193	193
194		-The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	152	+The CPL03-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the CPL03-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
195	195
196	196
197	197	== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
...	...	@@ -199,18 +199,16 @@
199	199
200	200	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
201	201
	160	+The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
202	202
203		-The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
204	204
	163	+(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from CPL03-LB.
205	205
206		-(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
	165	+Each CPL03-LB is shipped with a sticker with the default device EUI as below:
207	207
208		-Each S31x-LB is shipped with a sticker with the default device EUI as below:
	167	+[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
209	209
210		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220607170145-1.jpeg?rev=1.1||alt="image-20220607170145-1.jpeg"]]
211	211
212		-
213		-
214	214	You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
215	215
216	216
...	...	@@ -221,24 +221,24 @@
221	221
222	222	(% style="color:blue" %)**Add APP EUI and DEV EUI**
223	223
224		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="image-20220611161308-4.png"]]
	180	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
225	225
226	226
227	227	(% style="color:blue" %)**Add APP EUI in the application**
228	228
229	229
230		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="image-20220611161308-5.png"]]
	186	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
231	231
232	232
233	233	(% style="color:blue" %)**Add APP KEY**
234	234
235		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="image-20220611161308-6.png"]]
	191	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
236	236
237	237
238		-(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
	194	+(% style="color:blue" %)**Step 2:**(%%) Activate on CPL03-LB
239	239
240	240
241		-Press the button for 5 seconds to activate the S31x-LB.
	197	+Press the button for 5 seconds to activate the CPL03-LB.
242	242
243	243	(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
244	244
...	...	@@ -250,7 +250,7 @@
250	250	=== 2.3.1 Device Status, FPORT~=5 ===
251	251
252	252
253		-Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
	209	+Users can use the downlink command(**0x26 01**) to ask CPL03-LB to send device configure detail, include device configure status. CPL03-LB will uplink a payload via FPort=5 to server.
254	254
255	255	The Payload format is as below.
256	256
...	...	@@ -262,10 +262,10 @@
262	262
263	263	Example parse in TTNv3
264	264
265		-[[image:image-20230421162630-1.png]]
	221	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652859749264-179.png?width=723&height=275&rev=1.1||alt="1652859749264-179.png"]]
266	266
267	267
268		-(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
	224	+(% style="color:#037691" %)**Sensor Model**(%%): For CPL03-LB, this value is 0x0A
269	269
270	270	(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
271	271
...	...	@@ -318,237 +318,480 @@
318	318	Ex2: 0x0B49 = 2889mV
319	319
320	320
321		-=== 2.3.2  Sensor Data. FPORT~=2 ===
	277	+=== 2.3.2 Sensor Configuration, FPORT~=4 ===
322	322
323	323
324		-Sensor Data is uplink via FPORT=2
	280	+CPL03-LB will only send this command after getting the downlink command (0x26 02) from the server.
325	325
326		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
327		-|=(% style="width: 90px;background-color:#D9E2F3" %)(((
328		-**Size(bytes)**
329		-)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
330		-|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
331		-[[Battery>>||anchor="HBattery:"]]
332		-)))|(% style="width:130px" %)(((
333		-[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
334		-)))|(% style="width:91px" %)(((
335		-[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
336		-)))|(% style="width:103px" %)(((
337		-[[Temperature>>||anchor="HTemperature:"]]
338		-)))|(% style="width:80px" %)(((
339		-[[Humidity>>||anchor="HHumidity:"]]
	282	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	283	+|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
	284	+|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**|(% style="width:158px" %)**1**
	285	+|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: sec)|(% style="width:158px" %)Trigger mode
	286	+
	287	+* (((
	288	+(% style="color:#037691" %)** TDC: (default: 0x001C20)**
340	340	)))
341	341
342		-==== (% style="color:#4472c4" %)**Battery:**(%%) ====
	291	+(((
	292	+Uplink interval for the total pulse count, default value is 0x001C20 which is 7200 seconds = 2 hours.
343	343
344		-Sensor Battery Level.
	294	+
	295	+)))
345	345
346		-Ex1: 0x0B45 = 2885mV
	297	+* (((
	298	+(% style="color:#037691" %)** Disalarm: (default: 0)**
	299	+)))
347	347
348		-Ex2: 0x0B49 = 2889mV
	301	+(((
	302	+(% style="color:blue" %)** If Disalarm = 1**(%%), CPL03-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many disconnect/connect event, and platform only care about the total number of pulse.
	303	+)))
349	349
	305	+(((
	306	+(% style="color:blue" %)** If Disalarm = 0**(%%), CPL03-LB will send uplink at every TDC periodically.
350	350
	308	+
	309	+)))
351	351
352		-==== (% style="color:#4472c4" %)**Temperature:**(%%) ====
	311	+* (((
	312	+(% style="color:#037691" %)** Keep Status & Keep Time**
	313	+)))
353	353
354		-**Example**:
	315	+(((
	316	+Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.5AlarmBaseonTimeout"]]
355	355
356		-If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
	318	+
	319	+)))
357	357
358		-If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
	321	+* (((
	322	+(% style="color:#037691" %)** Trigger mode (default: 0)**
	323	+)))
359	359
360		-（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
	325	+(((
	326	+(% style="color:blue" %)** If Trigger mode = 0**(%%), count close to open event.
	327	+)))
361	361
	329	+(((
	330	+(% style="color:blue" %)** If Trigger mode = 1**(%%), count open to close event.
	331	+)))
362	362
363		-==== (% style="color:#4472c4" %)**Humidity:**(%%) ====
	333	+[[image:1652860064987-743.png||height="152" width="730"]]
364	364
365	365
366		-Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
	336	+[[image:1652860079526-831.png||height="209" width="729"]]
367	367
368	368
369		-==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
	339	+=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
370	370
371	371
372		-**Example:**
	342	+(((
	343	+(((
	344	+CPL03-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And CPL03-LB will:
	345	+)))
	346	+)))
373	373
374		-If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
	348	+(((
	349	+(((
	350	+periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].
	351	+)))
	352	+)))
375	375
376		-If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
	354	+(((
	355	+(((
	356	+Uplink Payload totals 11 bytes.
	357	+)))
	358	+)))
377	377
378		-If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
	360	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
	361	+|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0; width: 520px;" %)**Real-Time Open/Close Status, FPORT=2**
	362	+|(% style="width:60px" %)**Size(bytes)**|(% style="width:65px" %)**1**|(% style="width:65px" %)**3**|(% style="width:240px" %)**3**|(% style="width:90px" %)**4**
	363	+|(% style="width:101px" %)**Value**|(% style="width:133px" %)Status & [[Alarm>>||anchor="H3.5AlarmBaseonTimeout"]]|(% style="width:92px" %)Total pulse|(% style="width:247px" %)The last open duration (unit: min)|(% style="width:149px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]
379	379
380		-If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
	365	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:504px" %)
	366	+|=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0; width: 502px;" %)**Status & Alarm field**
	367	+|(% style="width:60px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:228px" %)**1**|(% style="width:146px" %)**1**
	368	+|(% style="width:76px" %)Value|(% style="width:80px" %)Calculate Flag|(% style="width:208px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:136px" %)Contact Status: 0: Open, 1: Close
381	381
	370	+* (((
	371	+(% style="color:#037691" %)** Calculate Flag**
	372	+)))
382	382
383		-== 2.4 Payload Decoder file ==
	374	+(((
	375	+The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
	376	+)))
384	384
	378	+(((
	379	+User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
	380	+)))
385	385
386		-In TTN, use can add a custom payload so it shows friendly reading
	382	+(((
	383	+Default value: 0.
	384	+)))
387	387
388		-In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
	386	+(((
	387	+Range (6 bits): (b)000000 ~~ (b) 111111
	388	+)))
389	389
390		-[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
	390	+(((
	391	+Refer: [[Set Calculate Flag>>||anchor="H3.9Setthecalculateflag"]]
391	391
	393	+
	394	+)))
392	392
393		-== 2.5 Datalog Feature ==
	396	+* (((
	397	+(% style="color:#037691" %)** Alarm**
	398	+)))
394	394
	400	+(((
	401	+See [[Alarm Base on Timeout>>||anchor="H3.5AlarmBaseonTimeout"]]
395	395
396		-Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
	403	+
	404	+)))
397	397
	406	+* (((
	407	+(% style="color:#037691" %)** Contact Status**
	408	+)))
398	398
399		-=== 2.5.1 Ways to get datalog via LoRaWAN ===
	410	+(((
	411	+0: Open
	412	+)))
400	400
	414	+(((
	415	+1: Close
401	401
402		-Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
	417	+
	418	+)))
403	403
404		-* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
405		-* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
	420	+* (((
	421	+(% style="color:#037691" %)** Total pulse**
	422	+)))
406	406
407		-Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
	424	+(((
	425	+Total pulse/counting base on dry [[contact trigger event>>||anchor="H2.3.2SensorConfiguration2CFPORT3D4"]]
	426	+)))
408	408
409		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
	428	+(((
	429	+Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
410	410
411		-=== 2.5.2 Unix TimeStamp ===
	431	+
	432	+)))
412	412
	434	+* (((
	435	+(% style="color:#037691" %)** The last open duration**
	436	+)))
413	413
414		-S31x-LB uses Unix TimeStamp format based on
	438	+(((
	439	+Dry Contact last open duration.
	440	+)))
415	415
416		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
	442	+(((
	443	+Unit: min.
	444	+)))
417	417
418		-User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
	446	+[[image:1652860403792-491.png||height="153" width="735"]]
419	419
420		-Below is the converter example
421	421
422		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
	449	+=== 2.3.4 Real-Time Open/Close Status, 3 pulse mode, Uplink FPORT~=6 ===
423	423
424		-So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
425	425
	452	+(% style="color:red" %)**Note:**
426	426
427		-=== 2.5.3 Set Device Time ===
	454	+* Firmware support for this mode is not released. If users want to test, please contact Dragino support.
	455	+* Users need to run (% style="color:blue" %)**AT+MOD=3**(%%) to support this model after updating the firmware.
	456	+* This mode doesn't support Historical Events and Datalog features.
428	428
	458	+(% style="color:blue" %)**CPL03-LB 3 Pulse Wiring:**
429	429
430		-User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
	460	+[[image:image-20221013153352-1.png||height="628" width="720"]]
431	431
432		-Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
433	433
434		-(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
	463	+(% style="color:blue" %)**Payload:**
435	435
	465	+[[image:image-20221013153352-2.png||height="167" width="1215"]]
436	436
437		-=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
438	438
	468	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:447px" %)
	469	+|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:61px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**3**
	470	+|(% style="width:93px" %)Value|(% style="width:59px" %)Status|(% style="width:98px" %)(((
	471	+Port1 Total Pulse(PB14)
	472	+)))|(% style="width:96px" %)(((
	473	+Port2 Total Pulse(PB15)
	474	+)))|(% style="width:94px" %)(((
	475	+Port3 Total Pulse(PA4)
	476	+)))
439	439
440		-The Datalog uplinks will use below payload format.
	478	+(% style="color:blue" %)**Status:**
441	441
442		-**Retrieval data payload:**
	480	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:257px" %)
	481	+|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**6**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**
	482	+|(% style="width:75px" %)Value|(% style="width:111px" %)Calculate Flag|(% style="width:68px" %)Reserve
443	443
444		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
445		-|=(% style="width: 80px;background-color:#D9E2F3" %)(((
446		-**Size(bytes)**
447		-)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
448		-|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
449		-[[Temp_Black>>||anchor="HTemperatureBlack:"]]
450		-)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
	484	+(% style="color:red" %)**Max COUNT for each port is 16777215. Exceed this number will reset to 1.**
451	451
452		-**Poll message flag & Ext:**
453	453
454		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
	487	+(% style="color:blue" %)**Related AT Command:**
455	455
456		-**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
	489	+(% style="color:#037691" %)**AT+TTRMOD1:  Port1 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
457	457
458		-**Poll Message Flag**: 1: This message is a poll message reply.
	491	+ AT+TTRMOD1=0  Downlink Command: 0xA4 01 00
459	459
460		-* Poll Message Flag is set to 1.
	493	+ AT+TTRMOD1=1  Downlink Command: 0xA4 01 01
461	461
462		-* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
463	463
464		-For example, in US915 band, the max payload for different DR is:
	496	+(% style="color:#037691" %)**AT+TTRMOD2:  Port2 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
465	465
466		-**a) DR0:** max is 11 bytes so one entry of data
	498	+ AT+TTRMOD1=0  Downlink Command: 0xA4 02 00
467	467
468		-**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
	500	+ AT+TTRMOD1=1  Downlink Command: 0xA4 02 01
469	469
470		-**c) DR2:** total payload includes 11 entries of data
471	471
472		-**d) DR3: **total payload includes 22 entries of data.
	503	+(% style="color:#037691" %)**AT+TTRMOD3:  Port3 count mode;  0: Signal falling edge(Default), 1: Signal raising edge**
473	473
474		-If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
	505	+ AT+TTRMOD1=0  Downlink Command: 0xA4 03 00
475	475
	507	+ AT+TTRMOD1=1  Downlink Command: 0xA4 03 01
476	476
477		-**Example:**
478	478
479		-If D2x-LB has below data inside Flash:
	510	+(% style="color:#037691" %)**AT+CALCFLAG:  Calculate Flag ( Default : 0 )**
480	480
481		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
	512	+ AT+CALCFLAG=aa
482	482
483		-If user sends below downlink command: 3160065F9760066DA705
484	484
485		-Where : Start time: 60065F97 = time 21/1/19 04:27:03
	515	+(% style="color:blue" %)**Downlink Command: 0xA5 aa**
486	486
487		- Stop time: 60066DA7= time 21/1/19 05:27:03
	517	+(% style="color:#037691" %)**AT+COUNTMOD:  Accumulative Mode;  0: Accumulative (Default),1: Reset after uplink.**
488	488
	519	+ AT+COUNTMOD=0 Downlink Command: 0x0B 00
489	489
490		-**S31x-LB will uplink this payload.**
	521	+ AT+COUNTMOD=1 Downlink Command: 0x0B 01
491	491
492		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
493	493
	524	+(% style="color:#037691" %)**AT+SETCNT:  Set count value**
	525	+
	526	+ AT+SETCNT=1,aa  Downlink Command: 0xA6 01 aa aa aa
	527	+
	528	+ AT+SETCNT=2,aa  Downlink Command: 0xA6 02 aa aa aa
	529	+
	530	+ AT+SETCNT=3,aa  Downlink Command: 0xA6 03 aa aa aa
	531	+
	532	+
	533	+(% style="color:blue" %)**Decode:  **(%%)[[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
	534	+
	535	+
	536	+=== 2.3.5 Historical Door Open/Close Event, FPORT~=3 ===
	537	+
	538	+
494	494	(((
495		-__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
	540	+CPL03-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].
496	496	)))
497	497
498	498	(((
499		-Where the first 11 bytes is for the first entry:
	544	+The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
500	500	)))
501	501
	547	+* (((
	548	+Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, CPL03-LB will send max bytes according to the current DR and Frequency bands.
	549	+)))
	550	+
502	502	(((
503		-7FFF089801464160065F97
	552	+For example, in the US915 band, the max payload for different DR is:
504	504	)))
505	505
506	506	(((
507		-**Ext sensor data**=0x7FFF/100=327.67
	556	+a) (% style="color:blue" %)**DR0**(%%): max is 11 bytes so one entry of data
508	508	)))
509	509
510	510	(((
511		-**Temp**=0x088E/100=22.00
	560	+b) (% style="color:blue" %)**DR1**(%%): max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
512	512	)))
513	513
514	514	(((
515		-**Hum**=0x014B/10=32.6
	564	+c) (% style="color:blue" %)**DR2**(%%): total payload includes 11 entries of data
516	516	)))
517	517
518	518	(((
519		-**poll message flag & Ext**=0x41,means reply data,Ext=1
	568	+d) (% style="color:blue" %)**DR3**(%%): total payload includes 22 entries of data.
520	520	)))
521	521
522	522	(((
523		-**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
	572	+If CPL03-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
	573	+
	574	+
524	524	)))
525	525
	577	+(% style="color:blue" %)** Downlink:**
526	526
527		-(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
	579	+(% class="box" %)
	580	+(((
	581	+**0x31 61 E9 3A D4 61 E9 3D E0 05**
	582	+)))
528	528
529		-== 2.6 Temperature Alarm Feature ==
	584	+[[image:1652861353248-624.png||height="189" width="720"]]
530	530
531	531
532		-S31x-LB work flow with Alarm feature.
	587	+(% style="color:blue" %)** Uplink:**
533	533
	589	+(% class="box" %)
	590	+(((
	591	+**0E 00 23 E6 00 00 00 61 E9 3B 04 0E 00 23 E6 00 00 00 61 E9 3B 25 0D 00 00 00 00 00 00 61 E9 3B C8 0E 00 00 02 00 00 00 61 E9 3B D4 0E 00 00 06 00 00 00 61 E9 3B DB 01 00 00 00 00 00 00 61 E9 3C 91 01 00 00 00 00 00 00 61 E9 3C A1 0D 00 00 00 00 00 00 61 E9 3C BC 0E 00 00 07 00 00 00 61 E9 3C D6 00 00 00 00 00 00 00 61 E9 3D A6**
	592	+)))
534	534
535		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
	594	+(% style="color:#037691" %)** **
536	536
	596	+(% style="color:#037691" %)**Parsed Value:**
537	537
	598	+(((
	599	+[ALARM, PIN_STATUS, TOTAL_PULSE, CALCULATE_FLAG, LAST_OPEN_DURATION, TIME]
	600	+)))
	601	+
	602	+(((
	603	+
	604	+)))
	605	+
	606	+(((
	607	+[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:35:48],
	608	+)))
	609	+
	610	+(((
	611	+[TRUE, CLOSE, 9190, 3, 0, 2022-01-20 10:36:21],
	612	+)))
	613	+
	614	+(((
	615	+[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:39:04],
	616	+)))
	617	+
	618	+(((
	619	+[TRUE, CLOSE, 2, 3, 0, 2022-01-20 10:39:16],
	620	+)))
	621	+
	622	+(((
	623	+[TRUE, CLOSE, 6, 3, 0, 2022-01-20 10:39:23],
	624	+)))
	625	+
	626	+(((
	627	+[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:25],
	628	+)))
	629	+
	630	+(((
	631	+[FALSE, OPEN, 0, 0, 0, 2022-01-20 10:42:41],
	632	+)))
	633	+
	634	+(((
	635	+[FALSE, OPEN, 0, 3, 0, 2022-01-20 10:43:08],
	636	+)))
	637	+
	638	+(((
	639	+[TRUE, CLOSE, 7, 3, 0, 2022-01-20 10:43:34],
	640	+)))
	641	+
	642	+(((
	643	+[FALSE, CLOSE, 0, 0, 0, 2022-01-20 10:47:02],
	644	+
	645	+
	646	+)))
	647	+
	648	+[[image:1652861480446-216.png]]
	649	+
	650	+
	651	+== 2.4 Payload Decoder file ==
	652	+
	653	+
	654	+In TTN, use can add a custom payload so it shows friendly reading
	655	+
	656	+In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
	657	+
	658	+
	659	+== 2.5 Datalog Feature ==
	660	+
	661	+
	662	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, CPL03-LB will store the reading for future retrieving purposes.
	663	+
	664	+
	665	+=== 2.5.1 Ways to get datalog via LoRaWAN ===
	666	+
	667	+
	668	+Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], CPL03-LB will wait for ACK for every uplink, when there is no LoRaWAN network,CPL03-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
	669	+
	670	+* (((
	671	+a) CPL03-LB will do an ACK check for data records sending to make sure every data arrive server.
	672	+)))
	673	+* (((
	674	+b) CPL03-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but CPL03-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if CPL03-LB gets a ACK, CPL03-LB will consider there is a network connection and resend all NONE-ACK messages.
	675	+)))
	676	+
	677	+Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
	678	+
	679	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
	680	+
	681	+
	682	+=== 2.5.2 Unix TimeStamp ===
	683	+
	684	+
	685	+CPL03-LB uses Unix TimeStamp format based on
	686	+
	687	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
	688	+
	689	+User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
	690	+
	691	+Below is the converter example
	692	+
	693	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
	694	+
	695	+
	696	+So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
	697	+
	698	+
	699	+=== 2.5.3 Set Device Time ===
	700	+
	701	+
	702	+User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
	703	+
	704	+Once CPL03-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL03-LB. If CPL03-LB fails to get the time from the server, CPL03-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	705	+
	706	+(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
	707	+
	708	+
	709	+
	710	+=== 2.5.4 Poll sensor value ===
	711	+
	712	+
	713	+Users can poll sensor values based on timestamps. Below is the downlink command.
	714	+
	715	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
	716	+|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
	717	+|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
	718	+|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
	719	+
	720	+(((
	721	+Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
	722	+)))
	723	+
	724	+(((
	725	+For example, downlink command[[image:image-20220518162852-1.png]]
	726	+)))
	727	+
	728	+(((
	729	+Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
	730	+)))
	731	+
	732	+(((
	733	+Uplink Internal =5s，means CPL03-LB will send one packet every 5s. range 5~~255s.
	734	+)))
	735	+
	736	+
538	538	== 2.7 Frequency Plans ==
539	539
540	540
541		-The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
	740	+The CPL03-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
542	542
543	543	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
544	544
545	545
546		-= 3. Configure S31x-LB =
	745	+= 3. Configure CPL03-LB =
547	547
548		-== 3.1 Configure Methods: ==
	747	+== 3.1 Configure Methods ==
549	549
550	550
551		-S31x-LB supports below configure method:
	750	+CPL03-LB supports below configure method:
552	552
553	553	* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
554	554	* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
...	...	@@ -569,21 +569,25 @@
569	569	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
570	570
571	571
572		-== 3.3 Commands special design for S31x-LB ==
	771	+== 3.3 Commands special design for CPL03-LB ==
573	573
574	574
575		-These commands only valid for S31x-LB, as below:
	774	+These commands only valid for CPL03-LB, as below:
576	576
577	577
578	578	=== 3.3.1 Set Transmit Interval Time ===
579	579
580	580
	780	+(((
581	581	Feature: Change LoRaWAN End Node Transmit Interval.
	782	+)))
582	582
	784	+(((
583	583	(% style="color:blue" %)**AT Command: AT+TDC**
	786	+)))
584	584
585	585	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
586		-|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
	789	+|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
587	587	|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
588	588	30000
589	589	OK
...	...	@@ -594,20 +594,47 @@
594	594	Set transmit interval to 60000ms = 60 seconds
595	595	)))
596	596
	800	+(((
597	597	(% style="color:blue" %)**Downlink Command: 0x01**
	802	+)))
598	598
	804	+(((
599	599	Format: Command Code (0x01) followed by 3 bytes time value.
	806	+)))
600	600
	808	+(((
601	601	If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	810	+)))
602	602
603		-* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
604		-* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
	812	+* (((
	813	+Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
	814	+)))
	815	+* (((
	816	+Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
605	605
606	606
	819	+
	820	+)))
607	607
608		-=== 3.3.2 Get Device Status ===
	822	+=== 3.3.2 Quit AT Command ===
609	609
610	610
	825	+Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.
	826	+
	827	+(% style="color:blue" %)**AT Command: AT+DISAT**
	828	+
	829	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:452px" %)
	830	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 198px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 99px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	831	+|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK
	832	+
	833	+(% style="color:blue" %)**Downlink Command:**
	834	+
	835	+No downlink command for this feature.
	836	+
	837	+
	838	+=== 3.3.3 Get Device Status ===
	839	+
	840	+
611	611	Send a LoRaWAN downlink to ask device send Alarm settings.
612	612
613	613	(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
...	...	@@ -615,88 +615,205 @@
615	615	Sensor will upload Device Status via FPORT=5. See payload section for detail.
616	616
617	617
618		-=== 3.3.3 Set Temperature Alarm Threshold: ===
	848	+=== 3.3.4 Enable / Disable Alarm ===
619	619
620		-* (% style="color:blue" %)**AT Command:**
621	621
622		-(% style="color:#037691" %)**AT+SHTEMP=min,max**
	851	+Feature: Enable/Disable Alarm for open/close event. Default value 0.
623	623
624		-* When min=0, and max≠0, Alarm higher than max
625		-* When min≠0, and max=0, Alarm lower than min
626		-* When min≠0 and max≠0, Alarm higher than max or lower than min
	853	+(% style="color:blue" %)**AT Command:**
627	627
628		-Example:
	855	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
	856	+|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
	857	+|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
	858	+|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
629	629
630		- AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
	860	+(% style="color:blue" %)**Downlink Command:**
631	631
632		-* (% style="color:blue" %)**Downlink Payload:**
	862	+**0xA7 01**  ~/~/  Same As AT+DISALARM=1
633	633
634		-(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
	864	+**0xA7 00    ** ~/~/  Same As AT+DISALARM=0
635	635
636		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
637	637
	867	+=== 3.3.5 Alarm Base on Timeout ===
638	638
639		-=== 3.3.4 Set Humidity Alarm Threshold: ===
640	640
641		-* (% style="color:blue" %)**AT Command:**
	870	+(((
	871	+CPL03-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
	872	+)))
642	642
643		-(% style="color:#037691" %)**AT+SHHUM=min,max**
644	644
645		-* When min=0, and max≠0, Alarm higher than max
646		-* When min≠0, and max=0, Alarm lower than min
647		-* When min≠0 and max≠0, Alarm higher than max or lower than min
	875	+(((
	876	+(% style="color:#4f81bd" %)**1. Keep Status: Status to be monitor**
	877	+)))
648	648
649		-Example:
	879	+(((
	880	+**Keep Status = 1**: Monitor Close to Open event
	881	+)))
650	650
651		- AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
	883	+(((
	884	+**Keep Status = 0**: Monitor Open to Close event
	885	+)))
652	652
653		-* (% style="color:blue" %)**Downlink Payload:**
654	654
655		-(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
	888	+(((
	889	+(% style="color:#4f81bd" %)**2. Keep Time: Timeout to send an Alarm**
	890	+)))
656	656
657		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
	892	+(((
	893	+Range 0 ~~ 65535(0xFFFF) seconds.
	894	+)))
658	658
	896	+(((
	897	+If** keep time = 0**, Disable Alarm Base on Timeout feature.
	898	+)))
659	659
660		-=== 3.3.5 Set Alarm Interval: ===
	900	+(((
	901	+If **keep time > 0**, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
	902	+)))
661	661
662		-The shortest time of two Alarm packet. (unit: min)
663	663
664		-* (% style="color:blue" %)**AT Command:**
	905	+(((
	906	+(% style="color:#4f81bd" %)**AT Command**(%%) to configure:
	907	+)))
665	665
666		-(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
	909	+(((
	910	+(% style="color:blue" %)**AT+TTRIG=1,30**(%%)  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL03-LB will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
	911	+)))
667	667
668		-* (% style="color:blue" %)**Downlink Payload:**
	913	+(((
	914	+(% style="color:blue" %)**AT+TTIG=0,0 **(%%) ~-~-> Default Value, disable timeout Alarm.
	915	+)))
669	669
670		-(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
671	671
	918	+(((
	919	+(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:
	920	+)))
672	672
673		-=== 3.3.6 Get Alarm settings  （什么FPORT?） ===
	922	+(((
	923	+**Command: 0xA9 aa bb cc**
	924	+)))
674	674
	926	+(((
	927	+**A9: **Command Type Code
	928	+)))
675	675
676		-Send a LoRaWAN downlink to ask device send Alarm settings.
	930	+(((
	931	+**aa: **status to be monitored
	932	+)))
677	677
678		-* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
	934	+(((
	935	+**bb cc: **timeout.
	936	+)))
679	679
680		-**Example:**
681	681
682		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
	939	+(((
	940	+If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
	941	+)))
683	683
	943	+(((
	944	+Or
	945	+)))
684	684
685		-**Explain:**
	947	+(((
	948	+0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
	949	+)))
686	686
687		-* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
688	688
	952	+=== 3.3.6 Clear Flash Record ===
689	689
690	690
691		-=== 3.3.7 Set Interrupt Mode ===
	955	+Feature: Clear flash storage for data log feature.
692	692
	957	+(% style="color:blue" %)**AT Command: AT+CLRDTA**
693	693
694		-Feature, Set Interrupt mode for GPIO_EXIT.
	959	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
	960	+|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 169px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 174px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	961	+|(% style="width:157px" %)AT+CLRDTA|(% style="width:169px" %)Clear flash storage for data log feature.|Clear all stored sensor data… OK
695	695
	963	+(((
	964	+(% style="color:blue" %)**Downlink Command:**
	965	+)))
	966	+
	967	+(((
	968	+* **Example**: 0xA301  ~/~/  Same as AT+CLRDTA
	969	+)))
	970	+
	971	+
	972	+
	973	+
	974	+=== 3.3.7 Set trigger mode ===
	975	+
	976	+
	977	+Feature: Set the trigger interrupt mode.
	978	+
	979	+(% style="color:blue" %)**AT Command: AT+TTRMOD**
	980	+
	981	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
	982	+|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 246px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 92px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	983	+|(% style="width:157px" %)(((
	984	+AT+TTRMOD=1
	985	+)))|(% style="width:156px" %)Count and trigger from open to close (rising edge)|(% style="width:89px" %)(((
	986	+(((
	987	+OK
	988	+)))
	989	+)))
	990	+|(% style="width:157px" %)(((
	991	+AT+TTRMOD=0
	992	+)))|(% style="width:156px" %)Count and trigger from close to open (falling edge)|(% style="width:89px" %)(((
	993	+OK
	994	+)))
	995	+
	996	+(% style="color:blue" %)**Downlink Command:**
	997	+
	998	+* **Example**: 0xA401  ~/~/  Same as AT+ TTRMOD =1
	999	+
	1000	+
	1001	+
	1002	+=== 3.3.8 Set the calculate flag ===
	1003	+
	1004	+
	1005	+Feature: Set the calculate flag
	1006	+
	1007	+(% style="color:blue" %)**AT Command: AT+CALCFLAG**
	1008	+
	1009	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
	1010	+|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 193px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	1011	+|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
	1012	+|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
	1013	+
	1014	+(% style="color:blue" %)**Downlink Command:**
	1015	+
	1016	+* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
	1017	+
	1018	+=== 3.3.9 Set count number ===
	1019	+
	1020	+
	1021	+Feature: Manually set the count number
	1022	+
	1023	+(% style="color:blue" %)**AT Command: AT+SETCNT**
	1024	+
	1025	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
	1026	+|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 96px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	1027	+|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
	1028	+|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
	1029	+
	1030	+(% style="color:blue" %)**Downlink Command:**
	1031	+
	1032	+* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
	1033	+
	1034	+* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
	1035	+
	1036	+=== 3.3.10 Set Interrupt Mode ===
	1037	+
	1038	+
	1039	+Feature, Set Interrupt mode for PA8 of pin.
	1040	+
	1041	+When AT+INTMOD=0 is set, PA8 is used as a digital input port.
	1042	+
696	696	(% style="color:blue" %)**AT Command: AT+INTMOD**
697	697
698	698	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
699		-|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
	1046	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
700	700	|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
701	701	0
702	702	OK
...	...	@@ -717,14 +717,46 @@
717	717	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
718	718
719	719	* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
	1067	+
720	720	* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
721	721
722	722
723	723
	1072	+=== 3.3.11 Set Power Output Duration ===
	1073	+
	1074	+
	1075	+Control the output duration 5V . Before each sampling, device will
	1076	+
	1077	+~1. first enable the power output to external sensor,
	1078	+
	1079	+2. keep it on as per duration, read sensor value and construct uplink payload
	1080	+
	1081	+3. final, close the power output.
	1082	+
	1083	+(% style="color:blue" %)**AT Command: AT+5VT**
	1084	+
	1085	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	1086	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
	1087	+|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
	1088	+OK
	1089	+|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
	1090	+
	1091	+(% style="color:blue" %)**Downlink Command: 0x07**
	1092	+
	1093	+Format: Command Code (0x07) followed by 2 bytes.
	1094	+
	1095	+The first and second bytes are the time to turn on.
	1096	+
	1097	+* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
	1098	+
	1099	+* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
	1100	+
	1101	+
	1102	+
724	724	= 4. Battery & Power Consumption =
725	725
726	726
727		-S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
	1106	+CPL03-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
728	728
729	729	[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
730	730
...	...	@@ -733,32 +733,37 @@
733	733
734	734
735	735	(% class="wikigeneratedid" %)
736		-User can change firmware S31x-LB to:
	1115	+User can change firmware CPL03-LB to:
737	737
738	738	* Change Frequency band/ region.
	1118	+
739	739	* Update with new features.
	1120	+
740	740	* Fix bugs.
741	741
742		-Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
	1123	+Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
743	743
744	744
745	745	Methods to Update Firmware:
746	746
747		-* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
748		-* Update through UART TTL interface. **[[Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
	1128	+* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
749	749
	1130	+* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
750	750
751		-
752	752	= 6. FAQ =
753	753
	1134	+== 6.1  AT Commands input doesn't work ==
754	754
755	755
	1137	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	1138	+
	1139	+
756	756	= 7. Order Info =
757	757
758	758
759		-Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
	1143	+Part Number: (% style="color:blue" %)**CPL03-LB-XXX**
760	760
761		-(% style="color:red" %)**XX**(%%): The default frequency band
	1145	+(% style="color:red" %)**XXX**(%%): The default frequency band
762	762
763	763	* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
764	764
...	...	@@ -776,14 +776,12 @@
776	776
777	777	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
778	778
779		-
780		-
781	781	= 8. ​Packing Info =
782	782
783	783
784	784	(% style="color:#037691" %)**Package Includes**:
785	785
786		-* S31x-LB LoRaWAN Temperature & Humidity Sensor
	1168	+* CPL03-LB LoRaWAN Pulse/Contact Sensor
787	787
788	788	(% style="color:#037691" %)**Dimension and weight**:
789	789
...	...	@@ -795,11 +795,9 @@
795	795
796	796	* Weight / pcs : g
797	797
798		-
799		-
800	800	= 9. Support =
801	801
802	802
803	803	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
804	804
805		-* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
	1185	+* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].

1682646494051-944.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+206.9 KB

Content

S31-B.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.3 KB

Content

S31.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+58.7 KB

Content

S31B.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.5 KB

Content

image-20230426084152-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+190.0 KB

Content

image-20230523174230-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+605.9 KB

Content

image-20230524105433-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+121.4 KB

Content

image-20230524105747-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+223.2 KB

Content

image-20230524110125-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+194.1 KB

Content

image-20230524110211-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+110.1 KB

Content

image-20230524114302-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.0 KB

Content

image-20230524114654-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.8 KB

Content

image-20230524114826-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.3 KB

Content

image-20230524144422-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.9 KB

Content

image-20230524144456-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.9 KB

Content

image-20230527093155-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+9.3 KB

Content

image-20230527093214-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.7 KB

Content

image-20230530084138-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230530084608-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content