Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 14.14
edited by Xiaoling
on 2023/04/17 09:33
Change comment: There is no comment for this version
To version 30.1
edited by Ellie Zhang
on 2023/05/06 14:39
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Ellie
Content
... ... @@ -1,8 +1,11 @@
1 -
1 +(% style="text-align:center" %)
2 +[[image:S31-B.jpg]]
2 2  
3 3  
4 -**Table of Contents：**
5 5  
6 +
7 +**目录：**
8 +
6 6  {{toc/}}
7 7  
8 8  
... ... @@ -10,26 +10,42 @@
10 10  
11 11  
12 12  
13 -= 1. Introduction =
16 += 一、简介 =
14 14  
15 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
18 +== 1.1 什么是 S31x-LB LoRaWAN 温湿度传感器 ==
16 16  
17 17  
18 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
21 +(((
22 +Dragino S31x-LB 是 用于物联网解决方案的(% style="color:blue" %)**LoRaWAN 温度和湿度传感器。**(%%)用于(% style="color:blue" %)**精确测量周围环境温度和相对空气湿度**(%%)，然后通过LoRaWAN无线协议上传到物联网服务器。
23 +)))
19 19  
20 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
25 +(((
26 +S31x-LB采用的温湿度传感器为SHT31，是Sensirion的全校准、线性化、温度补偿数字输出，具有很强的可靠性和长期稳定性。SHT31 固定在(% style="color:blue" %)**防水防冷凝外壳**(%%)中，可长期使用。
27 +)))
21 21  
29 +(((
22 22  The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
31 +)))
23 23  
33 +(((
24 24  S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
35 +)))
25 25  
37 +(((
26 26  S31x-LB has max 3 probes which measure maximum 3 temperature points.
39 +)))
27 27  
41 +(((
28 28  S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 +)))
29 29  
45 +(((
30 30  S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
47 +)))
31 31  
49 +(((
32 32  Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 +)))
33 33  
34 34  
35 35  == 1.2 ​Features ==
... ... @@ -118,7 +118,7 @@
118 118  == 1.6 BLE connection ==
119 119  
120 120  
121 -D2x-LB support BLE remote configure.
140 +S31x-LB support BLE remote configure.
122 122  
123 123  
124 124  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -134,7 +134,7 @@
134 134  
135 135  
136 136  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
137 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 297px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
156 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
138 138  |(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
139 139  1 x SHT31 Probe
140 140  
... ... @@ -177,9 +177,6 @@
177 177  
178 178  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
179 179  
180 -
181 -
182 -
183 183  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
184 184  
185 185  
... ... @@ -187,10 +187,9 @@
187 187  
188 188  Each S31x-LB is shipped with a sticker with the default device EUI as below:
189 189  
190 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220607170145-1.jpeg?rev=1.1||alt="image-20220607170145-1.jpeg"]]
206 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
191 191  
192 192  
193 -
194 194  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
195 195  
196 196  
... ... @@ -201,18 +201,18 @@
201 201  
202 202  (% style="color:blue" %)**Add APP EUI and DEV EUI**
203 203  
204 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="image-20220611161308-4.png"]]
219 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
205 205  
206 206  
207 207  (% style="color:blue" %)**Add APP EUI in the application**
208 208  
209 209  
210 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="image-20220611161308-5.png"]]
225 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
211 211  
212 212  
213 213  (% style="color:blue" %)**Add APP KEY**
214 214  
215 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="image-20220611161308-6.png"]]
230 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
216 216  
217 217  
218 218  (% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
... ... @@ -235,14 +235,14 @@
235 235  The Payload format is as below.
236 236  
237 237  
238 -(% border="1" cellspacing="4" style="background-color:#F2F2F2; width:510px" %)
239 -|(% colspan="6" style="background-color:#D9E2F3;color:#0070C0" %)**Device Status (FPORT=5)**
253 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
254 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
240 240  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
241 241  |(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
242 242  
243 243  Example parse in TTNv3
244 244  
245 -[[image:image-20230415153147-2.png||height="220" width="1120"]]
260 +[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
246 246  
247 247  
248 248  (% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
... ... @@ -303,22 +303,23 @@
303 303  
304 304  Sensor Data is uplink via FPORT=2
305 305  
306 -|=(((
321 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
322 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
307 307  **Size(bytes)**
308 -)))|=2|=4|=1|=**2**|=2
309 -|**Value**|(((
310 -[[Battery>>path:#HBattery:]]
311 -)))|(((
312 -[[Unix TimeStamp>>path:#H2.4.1UnixTimeStamp]]
313 -)))|(((
314 -[[Alarm Flag>>path:#HAlarmFlag26MOD:]]
315 -)))|(((
316 -[[Temperature>>path:#HTemperature:]]
317 -)))|(((
318 -[[Humidity>>path:#HHumidity:]]
324 +)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
325 +|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
326 +[[Battery>>||anchor="HBattery:"]]
327 +)))|(% style="width:130px" %)(((
328 +[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
329 +)))|(% style="width:91px" %)(((
330 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
331 +)))|(% style="width:103px" %)(((
332 +[[Temperature>>||anchor="HTemperature:"]]
333 +)))|(% style="width:80px" %)(((
334 +[[Humidity>>||anchor="HHumidity:"]]
319 319  )))
320 320  
321 -==== (% style="color:#4472c4" %)**Battery:**(%%) ====
337 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
322 322  
323 323  Sensor Battery Level.
324 324  
... ... @@ -328,7 +328,7 @@
328 328  
329 329  
330 330  
331 -==== (% style="color:#4472c4" %)**Temperature:**(%%) ====
347 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
332 332  
333 333  **Example**:
334 334  
... ... @@ -339,13 +339,13 @@
339 339  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
340 340  
341 341  
342 -==== (% style="color:#4472c4" %)**Humidity:**(%%) ====
358 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
343 343  
344 344  
345 345  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
346 346  
347 347  
348 -==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
364 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
349 349  
350 350  
351 351  **Example:**
... ... @@ -361,6 +361,7 @@
361 361  
362 362  == 2.4 Payload Decoder file ==
363 363  
380 +
364 364  In TTN, use can add a custom payload so it shows friendly reading
365 365  
366 366  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
... ... @@ -377,7 +377,7 @@
377 377  === 2.5.1 Ways to get datalog via LoRaWAN ===
378 378  
379 379  
380 -Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
397 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
381 381  
382 382  * a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
383 383  * b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
... ... @@ -384,7 +384,7 @@
384 384  
385 385  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
386 386  
387 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
404 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
388 388  
389 389  === 2.5.2 Unix TimeStamp ===
390 390  
... ... @@ -391,13 +391,13 @@
391 391  
392 392  S31x-LB uses Unix TimeStamp format based on
393 393  
394 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
411 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
395 395  
396 396  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
397 397  
398 398  Below is the converter example
399 399  
400 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
417 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
401 401  
402 402  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
403 403  
... ... @@ -405,11 +405,11 @@
405 405  === 2.5.3 Set Device Time ===
406 406  
407 407  
408 -User need to set **SYNCMOD=1** to enable sync time via MAC command.
425 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
409 409  
410 410  Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
411 411  
412 -**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
429 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
413 413  
414 414  
415 415  === 2.5.4 Datalog Uplink payload (FPORT~=3) ===
... ... @@ -419,19 +419,19 @@
419 419  
420 420  **Retrieval data payload:**
421 421  
422 -(% style="width:858px" %)
423 -|=(% style="width: 103px;" %)(((
439 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
440 +|=(% style="width: 80px;background-color:#D9E2F3" %)(((
424 424  **Size(bytes)**
425 -)))|=(% style="width: 129px;" %)**2**|=(% style="width: 114px;" %)**2**|=(% style="width: 217px;" %)**2**|=(% style="width: 153px;" %)**1**|=(% style="width: 139px;" %)**4**
426 -|(% style="width:103px" %)**Value**|(% style="width:129px" %)(((
442 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
443 +|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
427 427  [[Temp_Black>>||anchor="HTemperatureBlack:"]]
428 -)))|(% style="width:114px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:217px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:153px" %)Poll message flag & Ext|(% style="width:139px" %)[[Unix Time Stamp>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.6.2UnixTimeStamp]]
445 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
429 429  
430 430  **Poll message flag & Ext:**
431 431  
432 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
449 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
433 433  
434 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]] feature)
451 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
435 435  
436 436  **Poll Message Flag**: 1: This message is a poll message reply.
437 437  
... ... @@ -451,11 +451,12 @@
451 451  
452 452  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
453 453  
471 +
454 454  **Example:**
455 455  
456 -If D2x-LB has below data inside Flash:
474 +If S31x-LB has below data inside Flash:
457 457  
458 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
476 +[[image:1682646494051-944.png]]
459 459  
460 460  If user sends below downlink command: 3160065F9760066DA705
461 461  
... ... @@ -463,28 +463,45 @@
463 463  
464 464   Stop time: 60066DA7= time 21/1/19 05:27:03
465 465  
484 +
466 466  **S31x-LB will uplink this payload.**
467 467  
468 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
487 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
469 469  
489 +(((
470 470  __**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
491 +)))
471 471  
493 +(((
472 472  Where the first 11 bytes is for the first entry:
495 +)))
473 473  
497 +(((
474 474  7FFF089801464160065F97
499 +)))
475 475  
476 -Ext sensor data=0x7FFF/100=327.67
501 +(((
502 +**Ext sensor data**=0x7FFF/100=327.67
503 +)))
477 477  
478 -Temp=0x088E/100=22.00
505 +(((
506 +**Temp**=0x088E/100=22.00
507 +)))
479 479  
480 -Hum=0x014B/10=32.6
509 +(((
510 +**Hum**=0x014B/10=32.6
511 +)))
481 481  
482 -poll message flag & Ext=0x41,means reply data,Ext=1
513 +(((
514 +**poll message flag & Ext**=0x41,means reply data,Ext=1
515 +)))
483 483  
484 -Unix time is 0x60066009=1611030423s=21/1/19 04:27:03
517 +(((
518 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
519 +)))
485 485  
486 486  
487 -(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
522 +(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
488 488  
489 489  == 2.6 Temperature Alarm Feature ==
490 490  
... ... @@ -492,10 +492,9 @@
492 492  S31x-LB work flow with Alarm feature.
493 493  
494 494  
495 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
530 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
496 496  
497 497  
498 -
499 499  == 2.7 Frequency Plans ==
500 500  
501 501  
... ... @@ -506,7 +506,7 @@
506 506  
507 507  = 3. Configure S31x-LB =
508 508  
509 -== 3.1 Configure Methods: ==
543 +== 3.1 Configure Methods ==
510 510  
511 511  
512 512  S31x-LB supports below configure method:
... ... @@ -541,8 +541,8 @@
541 541  
542 542  (% style="color:blue" %)**AT Command: AT+TDC**
543 543  
544 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
545 -|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**
578 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
579 +|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
546 546  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
547 547  30000
548 548  OK
... ... @@ -567,16 +567,16 @@
567 567  
568 568  Send a LoRaWAN downlink to ask device send Alarm settings.
569 569  
570 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x26 01
604 +(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
571 571  
572 572  Sensor will upload Device Status via FPORT=5. See payload section for detail.
573 573  
574 574  
575 -=== 3.3.3 Set Temperature Alarm Threshold: ===
609 +=== 3.3.3 Set Temperature Alarm Threshold ===
576 576  
577 -* **AT Command:**
611 +* (% style="color:blue" %)**AT Command:**
578 578  
579 -**AT+SHTEMP=min,max**
613 +(% style="color:#037691" %)**AT+SHTEMP=min,max**
580 580  
581 581  * When min=0, and max≠0, Alarm higher than max
582 582  * When min≠0, and max=0, Alarm lower than min
... ... @@ -586,18 +586,18 @@
586 586  
587 587   AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
588 588  
589 -* **Downlink Payload:**
623 +* (% style="color:blue" %)**Downlink Payload:**
590 590  
591 -**0x(0C 01 00 1E)**  ~/~/Set AT+SHTEMP=0,30
625 +(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
592 592  
593 -**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
627 +(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
594 594  
595 595  
596 -=== 3.3.4 Set Humidity Alarm Threshold: ===
630 +=== 3.3.4 Set Humidity Alarm Threshold ===
597 597  
598 -* **AT Command:**
632 +* (% style="color:blue" %)**AT Command:**
599 599  
600 -**AT+SHHUM=min,max**
634 +(% style="color:#037691" %)**AT+SHHUM=min,max**
601 601  
602 602  * When min=0, and max≠0, Alarm higher than max
603 603  * When min≠0, and max=0, Alarm lower than min
... ... @@ -605,29 +605,29 @@
605 605  
606 606  Example:
607 607  
608 - AT+SHHUM=70,0   ~/~/ Alarm when humidity lower than 70%.
642 + AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
609 609  
610 -* **Downlink Payload:**
644 +* (% style="color:blue" %)**Downlink Payload:**
611 611  
612 -**0x(0C 02 46 00)**  ~/~/Set AT+SHTHUM=70,0
646 +(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
613 613  
614 -**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
648 +(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
615 615  
616 616  
617 -=== 3.3.5 Set Alarm Interval: ===
651 +=== 3.3.5 Set Alarm Interval ===
618 618  
619 619  The shortest time of two Alarm packet. (unit: min)
620 620  
621 -* **AT Command:**
655 +* (% style="color:blue" %)**AT Command:**
622 622  
623 -**AT+ATDC=30**  ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
657 +(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
624 624  
625 -* **Downlink Payload:**
659 +* (% style="color:blue" %)**Downlink Payload:**
626 626  
627 -**0x(0D 00 1E)**     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
661 +(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
628 628  
629 629  
630 -=== 3.3.6 Get Alarm settings  （什么FPORT?） ===
664 +=== 3.3.6 Get Alarm settings ===
631 631  
632 632  
633 633  Send a LoRaWAN downlink to ask device send Alarm settings.
... ... @@ -650,8 +650,8 @@
650 650  
651 651  (% style="color:blue" %)**AT Command: AT+INTMOD**
652 652  
653 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
654 -|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 157px;" %)**Response**
687 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
688 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
655 655  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
656 656  0
657 657  OK
... ... @@ -692,61 +692,61 @@
692 692  * Update with new features.
693 693  * Fix bugs.
694 694  
695 -Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
729 +固件和变更日志可以从以下位置下载：**[[固件下载链接>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
696 696  
697 697  
698 -Methods to Update Firmware:
732 +更新固件的方法：
699 699  
700 -* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
701 -* Update through UART TTL interface. **[[Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
734 +* （推荐方式）无线OTA固件更新：  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
735 +* 通过 UART TTL 接口更新。**[[指令>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**。
702 702  
703 -= 6. FAQ =
737 += 6. 常见问题 =
704 704  
705 705  
706 706  
707 -= 7. Order Info =
741 += 7. 订单信息 =
708 708  
709 709  
710 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
744 +零件号：(% style="color:blue" %)**S31-LB-XX / S31B-LB-XX**
711 711  
712 -(% style="color:red" %)**XX**(%%): The default frequency band
746 +(% style="color:red" %)**XX**(%%) : 默认频段
713 713  
714 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
748 +* (% style="color:red" %)**AS923**(%%) : LoRaWAN AS923 频段
715 715  
716 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
750 +* (% style="color:red" %)**AU915**(%%) : LoRaWAN AU915 频段
717 717  
718 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
752 +* (% style="color:red" %)**EU433**(%%) : LoRaWAN EU433 频段
719 719  
720 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
754 +* (% style="color:red" %)**EU868**(%%) : LoRaWAN EU868 频段
721 721  
722 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
756 +* (% style="color:red" %)**KR920**(%%) : LoRaWAN KR920 频段
723 723  
724 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
758 +* (% style="color:red" %)**US915**(%%) : LoRaWAN US915 频段
725 725  
726 -* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
760 +* (% style="color:red" %)**IN865**(%%) : LoRaWAN IN865 频段
727 727  
728 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
762 +* (% style="color:red" %)**CN470**(%%) : LoRaWAN CN470 频段
729 729  
730 -= 8. ​Packing Info =
764 += 8. 包装信息 =
731 731  
732 732  
733 -(% style="color:#037691" %)**Package Includes**:
767 +(% style="color:#037691" %)**套餐包括**：
734 734  
735 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
769 +* S31x-LB LoRaWAN 温湿度传感器
736 736  
737 -(% style="color:#037691" %)**Dimension and weight**:
771 +(% style="color:#037691" %)**尺寸和重量**：
738 738  
739 -* Device Size: cm
773 +* 设备尺寸：cm
740 740  
741 -* Device Weight: g
775 +* 设备重量：g
742 742  
743 -* Package Size / pcs : cm
777 +* 包装尺寸/个 : cm
744 744  
745 -* Weight / pcs : g
779 +* 重量/个：克
746 746  
747 -= 9. Support =
781 += 9.支持 =
748 748  
749 749  
750 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
784 +* 周一至周五的 09:00 至 18:00 GMT+8 提供支持。由于时区不同，我们无法提供现场支持。但是，您的问题将在上述时间表中尽快得到解答。
751 751  
752 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
786 +* 提供尽可能多的关于您的询问的信息（产品型号、准确描述您的问题和复制它的步骤等）并发送邮件至 [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1682646494051-944.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +206.9 KB
Content
S31-B.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Ellie
Size
... ... @@ -1,0 +1,1 @@
1 +28.3 KB
Content
image-20230421162630-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +23.5 KB
Content
image-20230421171614-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230426084152-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.0 KB
Content