Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 21 removed)
  • 1701149922873-259.png
  • image-20230614153353-1.png
  • image-20230614162334-2.png
  • image-20230614162359-3.png
  • image-20230615152941-1.png
  • image-20230615153004-2.png
  • image-20230805103904-1.png
  • image-20230805104104-2.png
  • image-20230805144259-1.png
  • image-20230805144936-2.png
  • image-20230805145056-3.png
  • image-20230805150315-4.png
  • image-20230805155335-1.png
  • image-20230805155428-2.png
  • image-20230805155515-3.png
  • image-20231110085300-1.png
  • image-20231110085342-2.png
  • image-20231110091447-3.png
  • image-20231110091506-4.png
  • image-20231110102635-5.png
  • image-20231128133704-1.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-DS20L -- LoRaWAN Smart Distance Detector User Manual
	1	+DDS20-LB -- LoRaWAN Ultrasonic Liquid Level Sensor User Manual

Content

...	...	@@ -1,5 +1,5 @@
1	1	(% style="text-align:center" %)
2		-[[image:image-20231110085342-2.png||height="481" width="481"]]
	2	+[[image:image-20230613133716-2.png||height="717" width="717"]]
3	3
4	4
5	5
...	...	@@ -19,469 +19,559 @@
19	19
20	20	= 1. Introduction =
21	21
22		-== 1.1 What is LoRaWAN Smart Distance Detector ==
	22	+== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
23	23
24	24
25		-The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN. DS20L can measure range between 3cm ~~ 200cm.
	25	+The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
26	26
27		-DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current
28		-consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
	27	+The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation.
29	29
30		-DS20L has a (% style="color:blue" %)**built-in 2400mAh non-chargeable battery**(%%) for long-term use up to several years*. Users can also power DS20L with an external power source for (% style="color:blue" %)**continuous measuring and distance alarm / counting purposes.**
	29	+DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
31	31
32		-DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
	31	+The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33	33
	33	+DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34	34
35		-[[image:image-20231110102635-5.png||height="402" width="807"]]
	35	+DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36	36
	37	+Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37	37
	39	+[[image:image-20230613140115-3.png||height="453" width="800"]]
	40	+
	41	+
38	38	== 1.2 ​Features ==
39	39
40	40
41		-* LoRaWAN Class A protocol
42		-* LiDAR distance detector, range 3 ~~ 200cm
43		-* Periodically detect or continuously detect mode
	45	+* LoRaWAN 1.0.3 Class A
	46	+* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	47	+* Ultra-low power consumption
	48	+* Liquid Level Measurement by Ultrasonic technology
	49	+* Measure through container, No need to contact Liquid
	50	+* Valid level range 20mm - 2000mm
	51	+* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
	52	+* Cable Length : 25cm
	53	+* Support Bluetooth v5.1 and LoRaWAN remote configure
	54	+* Support wireless OTA update firmware
44	44	* AT Commands to change parameters
45		-* Remotely configure parameters via LoRaWAN Downlink
46		-* Alarm & Counting mode
47		-* Firmware upgradable via program port or LoRa protocol
48		-* Built-in 2400mAh battery or power by external power source
	56	+* Downlink to change configure
	57	+* IP66 Waterproof Enclosure
	58	+* 8500mAh Battery for long term use
49	49
50	50	== 1.3 Specification ==
51	51
52	52
53		-(% style="color:#037691" %)**LiDAR Sensor:**
	63	+(% style="color:#037691" %)**Common DC Characteristics:**
54	54
55		-* Operation Temperature: -40 ~~ 80 °C
56		-* Operation Humidity: 0~~99.9%RH (no Dew)
57		-* Storage Temperature: -10 ~~ 45°C
58		-* Measure Range: 3cm~~200cm @ 90% reflectivity
59		-* Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
60		-* ToF FoV: ±9°, Total 18°
61		-* Light source: VCSEL
	65	+* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
	66	+* Operating Temperature: -40 ~~ 85°C
62	62
63		-== 1.4 Power Consumption ==
	68	+(% style="color:#037691" %)**LoRa Spec:**
64	64
	70	+* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
	71	+* Max +22 dBm constant RF output vs.
	72	+* RX sensitivity: down to -139 dBm.
	73	+* Excellent blocking immunity
65	65
66		-(% style="color:#037691" %)**Battery Power Mode:**
	75	+(% style="color:#037691" %)**Battery:**
67	67
68		-* Idle: 0.003 mA @ 3.3v
69		-* Max : 360 mA
	77	+* Li/SOCI2 un-chargeable battery
	78	+* Capacity: 8500mAh
	79	+* Self-Discharge: <1% / Year @ 25°C
	80	+* Max continuously current: 130mA
	81	+* Max boost current: 2A, 1 second
70	70
71		-(% style="color:#037691" %)**Continuously mode**:
	83	+(% style="color:#037691" %)**Power Consumption**
72	72
73		-* Idle: 21 mA @ 3.3v
74		-* Max : 360 mA
	85	+* Sleep Mode: 5uA @ 3.3v
	86	+* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
75	75
76		-= 2. Configure DS20L to connect to LoRaWAN network =
	88	+== 1.4 Suitable Container & Liquid ==
77	77
78		-== 2.1 How it works ==
79	79
	91	+* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
	92	+* Container shape is regular, and surface is smooth.
	93	+* Container Thickness:
	94	+** Pure metal material.  2~~8mm, best is 3~~5mm
	95	+** Pure non metal material: <10 mm
	96	+* Pure liquid without irregular deposition.(% style="display:none" %)
80	80
81		-The DS20L is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS20L. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	98	+== 1.5 Install DDS20-LB ==
82	82
83		-(% style="display:none" %) (%%)
84	84
85		-== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
	101	+(% style="color:blue" %)**Step 1**(%%):  Choose the installation point.
86	86
	103	+DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
87	87
88		-Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
	105	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
89	89
90		-The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.(% style="display:none" %)
91	91
92		-[[image:image-20231110102635-5.png||height="402" width="807"]](% style="display:none" %)
	108	+(((
	109	+(% style="color:blue" %)**Step 2**(%%):  Polish the installation point.
	110	+)))
93	93
94		-(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS20L.
	112	+(((
	113	+For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
	114	+)))
95	95
96		-Each DS20L is shipped with a sticker with the default device EUI as below:
	116	+[[image:image-20230613143052-5.png]]
97	97
98		-[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
99	99
	119	+No polish needed if the container is shine metal surface without paint or non-metal container.
100	100
101		-You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
	121	+[[image:image-20230613143125-6.png]]
102	102
103	103
104		-(% style="color:blue" %)**Register the device**
	124	+(((
	125	+(% style="color:blue" %)**Step3:   **(%%)Test the installation point.
	126	+)))
105	105
106		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
	128	+(((
	129	+Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
	130	+)))
107	107
	132	+(((
	133	+It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
	134	+)))
108	108
109		-(% style="color:blue" %)**Add APP EUI and DEV EUI**
	136	+(((
	137	+After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
	138	+)))
110	110
111		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
112	112
	141	+(((
	142	+(% style="color:red" %)**LED Status:**
	143	+)))
113	113
114		-(% style="color:blue" %)**Add APP EUI in the application**
	145	+* (((
	146	+Onboard LED: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
	147	+)))
115	115
	149	+* (((
	150	+(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
	151	+)))
	152	+* (((
	153	+(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
	154	+)))
116	116
117		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
	156	+(((
	157	+LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
	158	+)))
118	118
119	119
120		-(% style="color:blue" %)**Add APP KEY**
	161	+(((
	162	+(% style="color:red" %)**Note 2:**
	163	+)))
121	121
122		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
	165	+(((
	166	+(% style="color:red" %)**Ultrasonic coupling paste** (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
	167	+)))
123	123
124	124
125		-(% style="color:blue" %)**Step 2:**(%%) Activate on DS20L
	170	+(((
	171	+(% style="color:blue" %)**Step4:   **(%%)Install use Epoxy ab glue.
	172	+)))
126	126
127		-[[image:image-20231128133704-1.png||height="189" width="441"]]
	174	+(((
	175	+Prepare Eproxy AB glue.
	176	+)))
128	128
129		-Press the button for 5 seconds to activate the DS20L.
	178	+(((
	179	+Put Eproxy AB glue in the sensor and press it hard on the container installation point.
	180	+)))
130	130
131		-(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
	182	+(((
	183	+Reset DDS20-LB and see if the BLUE LED is slowly blinking.
	184	+)))
132	132
133		-After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	186	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
134	134
135	135
136		-== 2.3 ​Uplink Payload ==
	189	+(((
	190	+(% style="color:red" %)**Note 1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
	191	+)))
137	137
138		-=== 2.3.1 Device Status, FPORT~=5 ===
	193	+(((
	194	+(% style="color:red" %)**Note 2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
	195	+)))
139	139
140	140
141		-Users can use the downlink command(**0x26 01**) to ask DS20L to send device configure detail, include device configure status. DS20L will uplink a payload via FPort=5 to server.
	198	+== 1.6 Applications ==
142	142
143		-The Payload format is as below.
144	144
145		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
146		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
147		-**Size(bytes)**
148		-)))|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**1**|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**2**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 50px;" %)**2**
149		-|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
	201	+* Smart liquid control solution.
150	150
151		-Example parse in TTNv3
	203	+* Smart liquefied gas solution.
152	152
153		-[[image:1701149922873-259.png]]
	205	+== 1.7 Precautions ==
154	154
155		-(% style="color:blue" %)**Sensor Model**(%%): For DS20L, this value is 0x21
156	156
157		-(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
	208	+* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
158	158
159		-(% style="color:blue" %)**Frequency Band**:
	210	+* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
160	160
161		-0x01: EU868
	212	+* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.(% style="display:none" %)
162	162
163		-0x02: US915
	214	+== 1.8 Sleep mode and working mode ==
164	164
165		-0x03: IN865
166	166
167		-0x04: AU915
	217	+(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
168	168
169		-0x05: KZ865
	219	+(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
170	170
171		-0x06: RU864
172	172
173		-0x07: AS923
	222	+== 1.9 Button & LEDs ==
174	174
175		-0x08: AS923-1
176	176
177		-0x09: AS923-2
	225	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
178	178
179		-0x0a: AS923-3
180	180
181		-0x0b: CN470
	228	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	229	+|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
	230	+|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
	231	+If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
	232	+Meanwhile, BLE module will be active and user can connect via BLE to configure device.
	233	+)))
	234	+|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
	235	+(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
	236	+(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
	237	+Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
	238	+)))
	239	+|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
182	182
183		-0x0c: EU433
	241	+== 1.10 BLE connection ==
184	184
185		-0x0d: KR920
186	186
187		-0x0e: MA869
	244	+DDS20-LB support BLE remote configure.
188	188
189		-(% style="color:blue" %)**Sub-Band**:
	246	+BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
190	190
191		-AU915 and US915:value 0x00 ~~ 0x08
	248	+* Press button to send an uplink
	249	+* Press button to active device.
	250	+* Device Power on or reset.
192	192
193		-CN470: value 0x0B ~~ 0x0C
	252	+If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
194	194
195		-Other Bands: Always 0x00
196	196
197		-(% style="color:blue" %)**Battery Info**:
	255	+== 1.11 Pin Definitions ==
198	198
199		-Check the battery voltage.
	257	+[[image:image-20230523174230-1.png]]
200	200
201		-Ex1: 0x0B45 = 2885mV
202	202
203		-Ex2: 0x0B49 = 2889mV
	260	+== 1.12 Mechanical ==
204	204
205	205
206		-=== 2.3.2 Uplink Payload, FPORT~=2 ===
	263	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
207	207
208	208
209		-(((
210		-DS20L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS20L will:
	266	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
211	211
212		-periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
213	213
214		-Uplink Payload totals 11 bytes.
215		-)))
	269	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
216	216
217		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
218		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
219		-**Size(bytes)**
220		-)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white; width: 80px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**
221		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:62.5px" %)(((
222		-[[Temperature DS18B20>>||anchor="HDS18B20Temperaturesensor"]]
223		-)))|[[Distance>>||anchor="HDistance"]]|[[Distance signal strength>>||anchor="HDistancesignalstrength"]]|(% style="width:122px" %)(((
224		-[[Interrupt flag & Interrupt_level>>||anchor="HInterruptPin26A0InterruptLevel"]]
225		-)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="HLiDARtemp"]]|(% style="width:96px" %)(((
226		-[[Message Type>>||anchor="HMessageType"]]
227		-)))
228	228
229		-[[image:image-20230805104104-2.png||height="136" width="754"]]
	272	+(% style="color:blue" %)**Probe Mechanical:**
230	230
	274	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
231	231
232		-==== (% style="color:blue" %)**Battery Info**(%%) ====
233	233
	277	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
234	234
235		-Check the battery voltage for DS20L.
236	236
237		-Ex1: 0x0B45 = 2885mV
	280	+= 2. Configure DDS20-LB to connect to LoRaWAN network =
238	238
239		-Ex2: 0x0B49 = 2889mV
	282	+== 2.1 How it works ==
240	240
241	241
242		-==== (% style="color:blue" %)**DS18B20 Temperature sensor**(%%) ====
	285	+The DDS20-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS20-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
243	243
	287	+(% style="display:none" %) (%%)
244	244
245		-This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
	289	+== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
246	246
247	247
248		-**Example**:
	292	+Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
249	249
250		-If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
	294	+The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
251	251
252		-If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
	296	+[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
253	253
254	254
255		-==== (% style="color:blue" %)**Distance**(%%) ====
	299	+(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS20-LB.
256	256
	301	+Each DDS20-LB is shipped with a sticker with the default device EUI as below:
257	257
258		-Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
	303	+[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
259	259
260	260
261		-**Example**:
	306	+You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
262	262
263		-If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
264	264
	309	+(% style="color:blue" %)**Register the device**
265	265
266		-==== (% style="color:blue" %)**Distance signal strength**(%%) ====
	311	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
267	267
268	268
269		-Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
	314	+(% style="color:blue" %)**Add APP EUI and DEV EUI**
270	270
	316	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
271	271
272		-**Example**:
273	273
274		-If payload is: 01D7(H)=471(D), distance signal strength=471, 471>100,471≠65535, the measured value of Dist is considered credible.
	319	+(% style="color:blue" %)**Add APP EUI in the application**
275	275
276		-Customers can judge whether they need to adjust the environment based on the signal strength.
277	277
	322	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
278	278
279		-**1) When the sensor detects valid data:**
280	280
281		-[[image:image-20230805155335-1.png||height="145" width="724"]]
	325	+(% style="color:blue" %)**Add APP KEY**
282	282
	327	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
283	283
284		-**2) When the sensor detects invalid data:**
285	285
286		-[[image:image-20230805155428-2.png||height="139" width="726"]]
	330	+(% style="color:blue" %)**Step 2:**(%%) Activate on DDS20-LB
287	287
288	288
289		-**3) When the sensor is not connected:**
	333	+Press the button for 5 seconds to activate the DDS20-LB.
290	290
291		-[[image:image-20230805155515-3.png||height="143" width="725"]]
	335	+(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
292	292
	337	+After join success, it will start to upload messages to TTN and you can see the messages in the panel.
293	293
294		-==== (% style="color:blue" %)**Interrupt Pin & Interrupt Level**(%%) ====
295	295
	340	+== 2.3  ​Uplink Payload ==
296	296
297		-This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
298	298
299		-Note: The Internet Pin is a separate pin in the screw terminal. See pin mapping of GPIO_EXTI .
	343	+(((
	344	+DDS20-LB will uplink payload via LoRaWAN with below payload format:
	345	+)))
300	300
301		-**Example:**
	347	+(((
	348	+Uplink payload includes in total 8 bytes.
	349	+)))
302	302
303		-If byte[0]&0x01=0x00 : Normal uplink packet.
	351	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
	352	+|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
	353	+**Size(bytes)**
	354	+)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
	355	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
	356	+[[Distance>>||anchor="H2.3.2A0Distance"]]
	357	+(unit: mm)
	358	+)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
	359	+[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
	360	+)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
304	304
305		-If byte[0]&0x01=0x01 : Interrupt Uplink Packet.
	362	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
306	306
307	307
308		-==== (% style="color:blue" %)**LiDAR temp**(%%) ====
	365	+=== 2.3.1  Battery Info ===
309	309
310	310
311		-Characterize the internal temperature value of the sensor.
	368	+Check the battery voltage for DDS20-LB.
312	312
313		-**Example: **
314		-If payload is: 1C(H) <<24>>24=28(D),LiDAR temp=28℃.
315		-If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
	370	+Ex1: 0x0B45 = 2885mV
316	316
	372	+Ex2: 0x0B49 = 2889mV
317	317
318		-==== (% style="color:blue" %)**Message Type**(%%) ====
319	319
	375	+=== 2.3.2  Distance ===
320	320
	377	+
321	321	(((
322		-For a normal uplink payload, the message type is always 0x01.
	379	+Get the distance. Flat object range 20mm - 2000mm.
323	323	)))
324	324
325	325	(((
326		-Valid Message Type:
	383	+For example, if the data you get from the register is **0x06 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
	384	+
	385	+(% style="color:blue" %)**0605(H) = 1541 (D) = 1541 mm.**
327	327	)))
328	328
329		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
330		-|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
331		-|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)Normal Uplink Payload
332		-|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)Configure Info Payload
	388	+* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
333	333
334		-[[image:image-20230805150315-4.png||height="233" width="723"]]
	390	+* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
335	335
	392	+=== 2.3.3  Interrupt Pin ===
336	336
337		-=== 2.3.3 Historical measuring distance, FPORT~=3 ===
338	338
	395	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
339	339
340		-DS20L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
	397	+**Example:**
341	341
342		-The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
	399	+0x00: Normal uplink packet.
343	343
344		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
345		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
346		-**Size(bytes)**
347		-)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD; color: white; width: 85px;" %)**1**|=(% style="background-color: #4F81BD; color: white; width: 85px;" %)4
348		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)Interrupt flag & Interrupt_level|(% style="width:62.5px" %)(((
349		-Reserve(0xFF)
350		-)))|Distance|Distance signal strength|(% style="width:88px" %)(((
351		-LiDAR temp
352		-)))|(% style="width:85px" %)Unix TimeStamp
	401	+0x01: Interrupt Uplink Packet.
353	353
354		-**Interrupt flag & Interrupt level:**
355	355
356		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:480px" %)
357		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
358		-**Size(bit)**
359		-)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit7**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit6**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**[bit5:bit2]**|=(% style="width: 90px; background-color: #4F81BD; color: white;" %)**bit1**|=(% style="background-color: #4F81BD; color: white; width: 90px;" %)**bit0**
360		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)No ACK message|(% style="width:62.5px" %)Poll Message Flag|Reserve|(% style="width:91px" %)Interrupt level|(% style="width:88px" %)(((
361		-Interrupt flag
	404	+=== 2.3.4  DS18B20 Temperature sensor ===
	405	+
	406	+
	407	+This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
	408	+
	409	+**Example**:
	410	+
	411	+If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
	412	+
	413	+If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
	414	+
	415	+
	416	+=== 2.3.5  Sensor Flag ===
	417	+
	418	+
	419	+(((
	420	+0x01: Detect Ultrasonic Sensor
362	362	)))
363	363
364		-* (((
365		-Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, DS20L will send max bytes according to the current DR and Frequency bands.
	423	+(((
	424	+0x00: No Ultrasonic Sensor
366	366	)))
367	367
368		-For example, in the US915 band, the max payload for different DR is:
369	369
370		-**a) DR0:** max is 11 bytes so one entry of data
	428	+=== 2.3.6  Decode payload in The Things Network ===
371	371
372		-**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
373	373
374		-**c) DR2:** total payload includes 11 entries of data
	431	+While using TTN network, you can add the payload format to decode the payload.
375	375
376		-**d) DR3:** total payload includes 22 entries of data.
	433	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
377	377
378		-If DS20L doesn't have any data in the polling time. It will uplink 11 bytes of 0
	435	+The payload decoder function for TTN V3 is here:
379	379
	437	+(((
	438	+DDS20-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
	439	+)))
380	380
381		-**Downlink:**
382	382
383		-0x31 64 CC 68 0C 64 CC 69 74 05
	442	+== 2.4  Uplink Interval ==
384	384
385		-[[image:image-20230805144936-2.png||height="113" width="746"]]
386	386
387		-**Uplink:**
	445	+The DDS20-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
388	388
389		-43 FF 0E 10 00 B0 1E 64 CC 68 0C 40 FF 0D DE 00 A8 1E 64 CC 68 29 40 FF 09 92 00 D3 1E 64 CC 68 65 40 FF 02 3A 02 BC 1E 64 CC 68 A1 41 FF 0E 1A 00 A4 1E 64 CC 68 C0 40 FF 0D 2A 00 B8 1E 64 CC 68 E8 40 FF 00 C8 11 6A 1E 64 CC 69 24 40 FF 0E 24 00 AD 1E 64 CC 69 6D
390	390
	448	+== 2.5  ​Show Data in DataCake IoT Server ==
391	391
392		-**Parsed Value:**
393	393
394		-[DISTANCE , DISTANCE_SIGNAL_STRENGTH，LIDAR_TEMP，EXTI_STATUS , EXTI_FLAG , TIME]
	451	+(((
	452	+[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	453	+)))
395	395
396	396
397		-[360,176,30,High,True,2023-08-04 02:53:00],
	456	+(((
	457	+(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	458	+)))
398	398
399		-[355,168,30,Low,False,2023-08-04 02:53:29],
	460	+(((
	461	+(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	462	+)))
400	400
401		-[245,211,30,Low,False,2023-08-04 02:54:29],
402	402
403		-[57,700,30,Low,False,2023-08-04 02:55:29],
	465	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
404	404
405		-[361,164,30,Low,True,2023-08-04 02:56:00],
406	406
407		-[337,184,30,Low,False,2023-08-04 02:56:40],
	468	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
408	408
409		-[20,4458,30,Low,False,2023-08-04 02:57:40],
410	410
411		-[362,173,30,Low,False,2023-08-04 02:58:53],
	471	+(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
412	412
	473	+(% style="color:blue" %)**Step 4**(%%)**: Search the DDS20-LB and add DevEUI.**
413	413
414		-**History read from serial port：**
	475	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
415	415
416		-[[image:image-20230805145056-3.png]]
417	417
	478	+After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
418	418
419		-=== 2.3.4 Decode payload in The Things Network ===
	480	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
420	420
421	421
422		-While using TTN network, you can add the payload format to decode the payload.
423	423
424		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
	484	+== 2.6 Datalog Feature ==
425	425
426	426
427		-(((
428		-The payload decoder function for TTN is here:
429		-)))
	487	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS20-LB will store the reading for future retrieving purposes.
430	430
431		-(((
432		-DS20L TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
433		-)))
434	434
	490	+=== 2.6.1 Ways to get datalog via LoRaWAN ===
435	435
436		-== 2.4 ​Show Data in DataCake IoT Server ==
437	437
	493	+Set PNACKMD=1, DDS20-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS20-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
438	438
439		-(((
440		-[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	495	+* (((
	496	+a) DDS20-LB will do an ACK check for data records sending to make sure every data arrive server.
441	441	)))
	498	+* (((
	499	+b) DDS20-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS20-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS20-LB gets a ACK, DDS20-LB will consider there is a network connection and resend all NONE-ACK messages.
	500	+)))
442	442
	502	+Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
443	443
444		-(((
445		-(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
446		-)))
	504	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
447	447
448		-(((
449		-(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
450		-)))
451	451
	507	+=== 2.6.2 Unix TimeStamp ===
452	452
453		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592790040-760.png?rev=1.1||alt="1654592790040-760.png"]]
454	454
	510	+DDS20-LB uses Unix TimeStamp format based on
455	455
456		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654592800389-571.png?rev=1.1||alt="1654592800389-571.png"]]
	512	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
457	457
	514	+User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
458	458
459		-(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
	516	+Below is the converter example
460	460
461		-(% style="color:blue" %)**Step 4**(%%)**: Search the DS20L and add DevEUI.**
	518	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
462	462
463		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
464	464
	521	+So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
465	465
466		-After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
467	467
468		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
	524	+=== 2.6.3 Set Device Time ===
469	469
470	470
471		-== 2.5 Frequency Plans ==
	527	+User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
472	472
	529	+Once DDS20-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS20-LB. If DDS20-LB fails to get the time from the server, DDS20-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
473	473
474		-The DS20L uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
	531	+(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
475	475
	533	+
	534	+=== 2.6.4 Poll sensor value ===
	535	+
	536	+
	537	+Users can poll sensor values based on timestamps. Below is the downlink command.
	538	+
	539	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
	540	+|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
	541	+|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
	542	+|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
	543	+
	544	+(((
	545	+Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
	546	+)))
	547	+
	548	+(((
	549	+For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
	550	+)))
	551	+
	552	+(((
	553	+Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
	554	+)))
	555	+
	556	+(((
	557	+Uplink Internal =5s，means DDS20-LB will send one packet every 5s. range 5~~255s.
	558	+)))
	559	+
	560	+
	561	+== 2.7 Frequency Plans ==
	562	+
	563	+
	564	+The DDS20-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
	565	+
476	476	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
477	477
478	478
479		-= 3. Configure DS20L =
	569	+= 3. Configure DDS20-LB =
480	480
481	481	== 3.1 Configure Methods ==
482	482
483	483
484		-DS20L supports below configure method:
	574	+DDS20-LB supports below configure method:
485	485
486	486	* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
487	487
...	...	@@ -503,10 +503,10 @@
503	503	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
504	504
505	505
506		-== 3.3 Commands special design for DS20L ==
	596	+== 3.3 Commands special design for DDS20-LB ==
507	507
508	508
509		-These commands only valid for DS20L, as below:
	599	+These commands only valid for DDS20-LB, as below:
510	510
511	511
512	512	=== 3.3.1 Set Transmit Interval Time ===
...	...	@@ -521,7 +521,7 @@
521	521	)))
522	522
523	523	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
524		-|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
	614	+|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
525	525	|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
526	526	30000
527	527	OK
...	...	@@ -548,31 +548,26 @@
548	548	Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
549	549	)))
550	550	* (((
551		-Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
	641	+Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
552	552	)))
553	553
554		-
555	555	=== 3.3.2 Set Interrupt Mode ===
556	556
557	557
558		-Feature, Set Interrupt mode for pin of GPIO_EXTI.
	647	+Feature, Set Interrupt mode for PA8 of pin.
559	559
560		-When AT+INTMOD=0 is set, GPIO_EXTI is used as a digital input port.
	649	+When AT+INTMOD=0 is set, PA8 is used as a digital input port.
561	561
562	562	(% style="color:blue" %)**AT Command: AT+INTMOD**
563	563
564	564	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
565		-|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
	654	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
566	566	|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
567	567	0
568	568	OK
569	569	the mode is 0 =Disable Interrupt
570	570	)))
571		-|(% style="width:154px" %)(((
572		-AT+INTMOD=3
573		-
574		-(default)
575		-)))|(% style="width:196px" %)(((
	660	+|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
576	576	Set Transmit Interval
577	577	0. (Disable Interrupt),
578	578	~1. (Trigger by rising and falling edge)
...	...	@@ -590,78 +590,10 @@
590	590
591	591	* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
592	592
593		-
594		-
595		-== 3.3.3 Set work mode ==
596		-
597		-
598		-Feature: Switch working mode
599		-
600		-(% style="color:blue" %)**AT Command: AT+MOD**
601		-
602		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:463px" %)
603		-|=(% style="width: 162px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 193px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 108px;background-color:#4F81BD;color:white" %)**Response**
604		-|(% style="width:162px" %)AT+MOD=?|(% style="width:191px" %)Get the current working mode.|(% style="width:106px" %)OK
605		-|(% style="width:162px" %)AT+MOD=1|(% style="width:191px" %)Set the working mode to Regular measurements.|(% style="width:106px" %)(((
606		-OK
607		-
608		-Attention:Take effect after ATZ
609		-)))
610		-
611		-(% style="color:blue" %)**Downlink Command:**
612		-
613		-* **Example: **0x0A00  ~/~/  Same as AT+MOD=0
614		-
615		-* **Example:** 0x0A01  ~/~/  Same as AT+MOD=1
616		-
617		-
618		-=== 3.3.4 Set threshold and threshold mode ===
619		-
620		-
621		-Feature, Set threshold and threshold mode
622		-
623		-When **AT+DOL=0,0,0,0,400** is set, No threshold is used, the sampling time is 400ms.
624		-
625		-**AT Command: AT+DOL**
626		-
627		-(% border="1" cellspacing="4" style="width:571.818px" %)
628		-|(% style="width:172px" %)**Command Example**|(% style="width:279px" %)**Function**|(% style="width:118px" %)**Response**
629		-|(% style="width:172px" %)AT+ DOL =?|(% style="width:279px" %)Get the current threshold mode and sampling time|(% style="width:118px" %)(((
630		-0,0,0,0,400
631		-
632		-OK
633		-)))
634		-|(% style="width:172px" %)AT+ DOL =1,1800,100,0,400|(% style="width:279px" %)Set only the upper and lower thresholds|(% style="width:118px" %)OK
635		-
636		-
637		-(% border="1" cellspacing="4" style="width:668.818px" %)
638		-|(% rowspan="11" style="width:166px" %)**AT+DOL=5,1800,0,0,400**|(% rowspan="6" style="width:226px" %)The first bit sets the limit mode|(% style="width:251px" %)0:Do not use upper and lower limits
639		-|(% style="width:251px" %)1:Use upper and lower limits
640		-|(% style="width:251px" %)2:Less than the lower limit
641		-|(% style="width:251px" %)3:Greater than the lower limit
642		-|(% style="width:251px" %)4:Less than the upper limit
643		-|(% style="width:251px" %)5: Greater than the upper limit
644		-|(% style="width:226px" %)The second bit sets the upper limit value|(% style="width:251px" %)3~~2000MM
645		-|(% style="width:226px" %)The third bit sets the lower limit value|(% style="width:251px" %)3~~2000MM
646		-|(% rowspan="2" style="width:226px" %)The fourth bit sets the over-limit alarm or person or object count.|(% style="width:251px" %)0 Over-limit alarm, DO output is high
647		-|(% style="width:251px" %)1 Person or object counting statistics
648		-|(% style="width:226px" %)The fifth bit sets the sampling time|(% style="width:251px" %)(((
649		-0~~10000ms
650		-
651		-
652		-)))
653		-
654		-**Downlink Command: 0x07**
655		-
656		-Format: Command Code (0x07) followed by 9bytes.
657		-
658		-* Example 0: Downlink Payload: 070000000000000190  **~-~-->**  AT+MOD=0,0,0,0,400
659		-* Example 1: Downlink Payload: 070107080064000190  **~-~-->**  AT+MOD=1,1800,100,0,400
660		-
661	661	= 4. Battery & Power Consumption =
662	662
663	663
664		-DS20L use built-in 2400mAh non-chargeable battery for long-term use up to several years*. See below link for detail information about the battery info and how to replace.
	681	+DDS20-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
665	665
666	666	[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
667	667
...	...	@@ -670,7 +670,7 @@
670	670
671	671
672	672	(% class="wikigeneratedid" %)
673		-User can change firmware DS20L to:
	690	+User can change firmware DDS20-LB to:
674	674
675	675	* Change Frequency band/ region.
676	676
...	...	@@ -678,48 +678,50 @@
678	678
679	679	* Fix bugs.
680	680
681		-Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zqv1vt3komgp4tu/AAC33PnXIcWOVl_UXBEAeT_xa?dl=0]]**
	698	+Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
682	682
683	683	Methods to Update Firmware:
684	684
685		-* (Recommanded way) OTA firmware update via wireless:  **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
	702	+* (Recommanded way) OTA firmware update via wireless:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
686	686
687	687	* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
688	688
	706	+
689	689	= 6. FAQ =
690	690
691		-== 6.1 What is the frequency plan for DS20L? ==
	709	+== 6.1  What is the frequency plan for DDS20-LB? ==
692	692
693	693
694		-DS20L use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
	712	+DDS20-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
695	695
696	696
697		-= 7. Trouble Shooting =
	715	+== 6.2  Can I use DDS20-LB in condensation environment? ==
698	698
699		-== 7.1 AT Command input doesn't work ==
700	700
	718	+DDS20-LB is not suitable to be used in condensation environment. Condensation on the DDS20-LB probe will affect the reading and always got 0.
701	701
702		-In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
703	703
	721	+= 7.  Trouble Shooting =
704	704
705		-== 7.2 Significant error between the output distant value of LiDAR and actual distance ==
	723	+== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
706	706
707	707
708		-(((
709		-(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
710		-)))
	726	+It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
711	711
712		-(((
713		-(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
714		-)))
715	715
	729	+== 7.2  AT Command input doesn't work ==
716	716
717		-(((
718		-(% style="color:blue" %)**Cause ②**(%%)**: **The IR-pass filters are blocked.
719		-)))
720	720
	732	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	733	+
	734	+
	735	+== 7.3  Why i always see 0x0000 or 0 for the distance value? ==
	736	+
	737	+
721	721	(((
722		-(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
	739	+LDDS20 has a strict [[**installation requirement**>>||anchor="H1.5A0InstallDDS20-LB"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.
	740	+
	741	+If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.
723	723	)))
724	724
725	725
...	...	@@ -726,7 +726,7 @@
726	726	= 8. Order Info =
727	727
728	728
729		-Part Number: (% style="color:blue" %)**DS20L-XXX**
	748	+Part Number: (% style="color:blue" %)**DDS20-LB-XXX**
730	730
731	731	(% style="color:red" %)**XXX**(%%): **The default frequency band**
732	732
...	...	@@ -751,7 +751,7 @@
751	751
752	752	(% style="color:#037691" %)**Package Includes**:
753	753
754		-* DS20L LoRaWAN Smart Distance Detector x 1
	773	+* DDS20-LB LoRaWAN Ultrasonic Liquid Level Sensor x 1
755	755
756	756	(% style="color:#037691" %)**Dimension and weight**:
757	757

1701149922873-259.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-24.5 KB

Content

image-20230614153353-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-112.1 KB

Content

image-20230614162334-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-88.3 KB

Content

image-20230614162359-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-88.3 KB

Content

image-20230615152941-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-87.9 KB

Content

image-20230615153004-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-87.9 KB

Content

image-20230805103904-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-46.9 KB

Content

image-20230805104104-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-46.3 KB

Content

image-20230805144259-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-872.7 KB

Content

image-20230805144936-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-37.5 KB

Content

image-20230805145056-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-30.7 KB

Content

image-20230805150315-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-90.6 KB

Content

image-20230805155335-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.4 KB

Content

image-20230805155428-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.5 KB

Content

image-20230805155515-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.7 KB

Content

image-20231110085300-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-613.3 KB

Content

image-20231110085342-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-178.7 KB

Content

image-20231110091447-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.4 KB

Content

image-20231110091506-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.4 KB

Content

image-20231110102635-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-84.7 KB

Content

image-20231128133704-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-190.6 KB

Content