Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 16 removed)
  • image-20230615152941-1.png
  • image-20230615153004-2.png
  • image-20230805103904-1.png
  • image-20230805104104-2.png
  • image-20230805144259-1.png
  • image-20230805144936-2.png
  • image-20230805145056-3.png
  • image-20230805150315-4.png
  • image-20230805155335-1.png
  • image-20230805155428-2.png
  • image-20230805155515-3.png
  • image-20231110085300-1.png
  • image-20231110085342-2.png
  • image-20231110091447-3.png
  • image-20231110091506-4.png
  • image-20231110102635-5.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-DS20L -- LoRaWAN Smart Distance Detector User Manual
	1	+LDS12-LB -- LoRaWAN LiDAR ToF Distance Sensor User Manual

Content

...	...	@@ -1,5 +1,5 @@
1	1	(% style="text-align:center" %)
2		-[[image:image-20231110085342-2.png||height="481" width="481"]]
	2	+[[image:image-20230614153353-1.png]]
3	3
4	4
5	5
...	...	@@ -7,7 +7,6 @@
7	7
8	8
9	9
10		-
11	11	**Table of Contents：**
12	12
13	13	{{toc/}}
...	...	@@ -19,225 +19,259 @@
19	19
20	20	= 1. Introduction =
21	21
22		-== 1.1 What is LoRaWAN Smart Distance Detector ==
	21	+== 1.1 What is LoRaWAN LiDAR ToF Distance Sensor ==
23	23
24	24
25		-The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN. DS20L can measure range between 3cm ~~ 200cm.
	24	+The Dragino LDS12-LB is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
26	26
27		-DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current
28		-consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
	26	+The LDS12-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
29	29
30		-DS20L has a (% style="color:blue" %)**built-in 2400mAh non-chargeable battery**(%%) for long-term use up to several years*. Users can also power DS20L with an external power source for (% style="color:blue" %)**continuous measuring and distance alarm / counting purposes.**
	28	+It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
31	31
32		-DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
	30	+The LoRa wireless technology used in LDS12-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33	33
	32	+LDS12-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34	34
35		-[[image:image-20231110102635-5.png||height="402" width="807"]]
	34	+LDS12-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36	36
	36	+Each LDS12-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37	37
	38	+[[image:image-20230614162334-2.png||height="468" width="800"]]
	39	+
	40	+
38	38	== 1.2 ​Features ==
39	39
40	40
41		-* LoRaWAN Class A protocol
42		-* LiDAR distance detector, range 3 ~~ 200cm
43		-* Periodically detect or continuously detect mode
	44	+* LoRaWAN 1.0.3 Class A
	45	+* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	46	+* Ultra-low power consumption
	47	+* Laser technology for distance detection
	48	+* Measure Distance: 0.1m~~12m @ 90% Reflectivity
	49	+* Accuracy :  ±5cm@(0.1-6m), ±1%@(6m-12m)
	50	+* Monitor Battery Level
	51	+* Support Bluetooth v5.1 and LoRaWAN remote configure
	52	+* Support wireless OTA update firmware
44	44	* AT Commands to change parameters
45		-* Remotely configure parameters via LoRaWAN Downlink
46		-* Alarm & Counting mode
47		-* Firmware upgradable via program port or LoRa protocol
48		-* Built-in 2400mAh battery or power by external power source
	54	+* Downlink to change configure
	55	+* 8500mAh Battery for long term use
49	49
50	50	== 1.3 Specification ==
51	51
52	52
53		-(% style="color:#037691" %)**LiDAR Sensor:**
	60	+(% style="color:#037691" %)**Common DC Characteristics:**
54	54
55		-* Operation Temperature: -40 ~~ 80 °C
56		-* Operation Humidity: 0~~99.9%RH (no Dew)
57		-* Storage Temperature: -10 ~~ 45°C
58		-* Measure Range: 3cm~~200cm @ 90% reflectivity
59		-* Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
60		-* ToF FoV: ±9°, Total 18°
61		-* Light source: VCSEL
	62	+* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
	63	+* Operating Temperature: -40 ~~ 85°C
62	62
63		-(% style="display:none" %)
	65	+(% style="color:#037691" %)**Probe Specification:**
64	64
	67	+* Storage temperature：-20℃~~75℃
	68	+* Operating temperature : -20℃~~60℃
	69	+* Measure Distance:
	70	+** 0.1m ~~ 12m @ 90% Reflectivity
	71	+** 0.1m ~~ 4m @ 10% Reflectivity
	72	+* Accuracy : ±5cm@(0.1-6m), ±1%@(6m-12m)
	73	+* Distance resolution : 5mm
	74	+* Ambient light immunity : 70klux
	75	+* Enclosure rating : IP65
	76	+* Light source : LED
	77	+* Central wavelength : 850nm
	78	+* FOV : 3.6°
	79	+* Material of enclosure : ABS+PC
	80	+* Wire length : 25cm
65	65
66		-== 1.4 Power Consumption ==
	82	+(% style="color:#037691" %)**LoRa Spec:**
67	67
	84	+* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
	85	+* Max +22 dBm constant RF output vs.
	86	+* RX sensitivity: down to -139 dBm.
	87	+* Excellent blocking immunity
68	68
69		-(% style="color:#037691" %)**Battery Power Mode:**
	89	+(% style="color:#037691" %)**Battery:**
70	70
71		-* Idle: 0.003 mA @ 3.3v
72		-* Max : 360 mA
	91	+* Li/SOCI2 un-chargeable battery
	92	+* Capacity: 8500mAh
	93	+* Self-Discharge: <1% / Year @ 25°C
	94	+* Max continuously current: 130mA
	95	+* Max boost current: 2A, 1 second
73	73
74		-(% style="color:#037691" %)**Continuously mode**:
	97	+(% style="color:#037691" %)**Power Consumption**
75	75
76		-* Idle: 21 mA @ 3.3v
77		-* Max : 360 mA
	99	+* Sleep Mode: 5uA @ 3.3v
	100	+* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
78	78
79	79
	103	+== 1.4 Applications ==
80	80
81	81
82		-= 2. Configure DS20L to connect to LoRaWAN network =
	106	+* Horizontal distance measurement
	107	+* Parking management system
	108	+* Object proximity and presence detection
	109	+* Intelligent trash can management system
	110	+* Robot obstacle avoidance
	111	+* Automatic control
	112	+* Sewer
83	83
84		-== 2.1 How it works ==
85	85
	115	+(% style="display:none" %)
86	86
87		-The DS20L is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS20L. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	117	+== 1.5 Sleep mode and working mode ==
88	88
89		-(% style="display:none" %) (%%)
90	90
91		-== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
	120	+(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
92	92
	122	+(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
93	93
94		-Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
95	95
96		-The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.(% style="display:none" %)
	125	+== 1.6 Button & LEDs ==
97	97
98		-[[image:image-20231110102635-5.png||height="402" width="807"]](% style="display:none" %)
99	99
100		-(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS20L.
	128	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
101	101
102		-Each DS20L is shipped with a sticker with the default device EUI as below:
103	103
104		-[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
	131	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	132	+|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
	133	+|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
	134	+If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
	135	+Meanwhile, BLE module will be active and user can connect via BLE to configure device.
	136	+)))
	137	+|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
	138	+(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
	139	+(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
	140	+Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
	141	+)))
	142	+|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
105	105
	144	+== 1.7 BLE connection ==
106	106
107		-You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
108	108
	147	+LDS12-LB support BLE remote configure.
109	109
110		-(% style="color:blue" %)**Register the device**
	149	+BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
111	111
112		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
	151	+* Press button to send an uplink
	152	+* Press button to active device.
	153	+* Device Power on or reset.
113	113
	155	+If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
114	114
115		-(% style="color:blue" %)**Add APP EUI and DEV EUI**
116	116
117		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
	158	+== 1.8 Pin Definitions ==
118	118
	160	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WL03A-LB_LoRaWAN_None-Position_Rope_Type_Water_Leak_Controller_User_Manual/WebHome/image-20230613144156-1.png?rev=1.1||alt="image-20230613144156-1.png"]]
119	119
120		-(% style="color:blue" %)**Add APP EUI in the application**
121	121
122	122
123		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
	164	+== 1.9 Mechanical ==
124	124
125	125
126		-(% style="color:blue" %)**Add APP KEY**
	167	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
127	127
128		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
129	129
	170	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
130	130
131		-(% style="color:blue" %)**Step 2:**(%%) Activate on DS20L
132	132
	173	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
133	133
134		-Press the button for 5 seconds to activate the DS20L.
135	135
136		-(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
	176	+(% style="color:blue" %)**Probe Mechanical:**
137	137
138		-After join success, it will start to upload messages to TTN and you can see the messages in the panel.
139	139
140	140
141		-== 2.3 ​Uplink Payload ==
	180	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654827224480-952.png?rev=1.1||alt="1654827224480-952.png"]]
142	142
143		-=== 2.3.1 Device Status, FPORT~=5 ===
144	144
	183	+= 2. Configure LDS12-LB to connect to LoRaWAN network =
145	145
146		-Users can use the downlink command(**0x26 01**) to ask DS20L to send device configure detail, include device configure status. DS20L will uplink a payload via FPort=5 to server.
	185	+== 2.1 How it works ==
147	147
148		-The Payload format is as below.
149	149
150		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
151		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
152		-**Size(bytes)**
153		-)))|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**1**|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**2**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 50px;" %)**2**
154		-|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
	188	+The LDS12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the LDS12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
155	155
156		-Example parse in TTNv3
	190	+(% style="display:none" %) (%%)
157	157
158		-[[image:image-20230805103904-1.png||height="131" width="711"]]
	192	+== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
159	159
160		-(% style="color:blue" %)**Sensor Model**(%%): For DS20L, this value is 0x24
161	161
162		-(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
	195	+Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
163	163
164		-(% style="color:blue" %)**Frequency Band**:
	197	+The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
165	165
166		-0x01: EU868
	199	+[[image:image-20230614162359-3.png||height="468" width="800"]](% style="display:none" %)
167	167
168		-0x02: US915
169	169
170		-0x03: IN865
	202	+(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from LDS12-LB.
171	171
172		-0x04: AU915
	204	+Each LDS12-LB is shipped with a sticker with the default device EUI as below:
173	173
174		-0x05: KZ865
	206	+[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
175	175
176		-0x06: RU864
177	177
178		-0x07: AS923
	209	+You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
179	179
180		-0x08: AS923-1
181	181
182		-0x09: AS923-2
	212	+(% style="color:blue" %)**Register the device**
183	183
184		-0x0a: AS923-3
	214	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
185	185
186		-0x0b: CN470
187	187
188		-0x0c: EU433
	217	+(% style="color:blue" %)**Add APP EUI and DEV EUI**
189	189
190		-0x0d: KR920
	219	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
191	191
192		-0x0e: MA869
193	193
194		-(% style="color:blue" %)**Sub-Band**:
	222	+(% style="color:blue" %)**Add APP EUI in the application**
195	195
196		-AU915 and US915:value 0x00 ~~ 0x08
197	197
198		-CN470: value 0x0B ~~ 0x0C
	225	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
199	199
200		-Other Bands: Always 0x00
201	201
202		-(% style="color:blue" %)**Battery Info**:
	228	+(% style="color:blue" %)**Add APP KEY**
203	203
204		-Check the battery voltage.
	230	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
205	205
206		-Ex1: 0x0B45 = 2885mV
207	207
208		-Ex2: 0x0B49 = 2889mV
	233	+(% style="color:blue" %)**Step 2:**(%%) Activate on LDS12-LB
209	209
210	210
211		-=== 2.3.2 Uplink Payload, FPORT~=2 ===
	236	+Press the button for 5 seconds to activate the LDS12-LB.
212	212
	238	+(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
213	213
214		-(((
215		-DS20L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS20L will:
	240	+After join success, it will start to upload messages to TTN and you can see the messages in the panel.
216	216
217		-periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
218	218
219		-Uplink Payload totals 11 bytes.
	243	+== 2.3 ​Uplink Payload ==
	244	+
	245	+
	246	+(((
	247	+LDS12-LB will uplink payload via LoRaWAN with below payload format:
220	220	)))
221	221
	250	+(((
	251	+Uplink payload includes in total 11 bytes.
	252	+)))
	253	+
	254	+
222	222	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
223		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
	256	+|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)(((
224	224	**Size(bytes)**
225		-)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white; width: 80px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**
226		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:62.5px" %)(((
227		-[[Temperature DS18B20>>||anchor="HDS18B20Temperaturesensor"]]
228		-)))|[[Distance>>||anchor="HDistance"]]|[[Distance signal strength>>||anchor="HDistancesignalstrength"]]|(% style="width:122px" %)(((
229		-[[Interrupt flag & Interrupt_level>>||anchor="HInterruptPin26A0InterruptLevel"]]
230		-)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="HLiDARtemp"]]|(% style="width:96px" %)(((
231		-[[Message Type>>||anchor="HMessageType"]]
	258	+)))|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**
	259	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	260	+[[Temperature DS18B20>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	261	+)))|[[Distance>>||anchor="H2.3.3A0Distance"]]|[[Distance signal strength>>||anchor="H2.3.4Distancesignalstrength"]]|(((
	262	+[[Interrupt flag>>||anchor="H2.3.5InterruptPin"]]
	263	+)))|[[LiDAR temp>>||anchor="H2.3.6LiDARtemp"]]|(((
	264	+[[Message Type>>||anchor="H2.3.7MessageType"]]
232	232	)))
233	233
234		-[[image:image-20230805104104-2.png||height="136" width="754"]]
	267	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654833689380-972.png?rev=1.1||alt="1654833689380-972.png"]]
235	235
236	236
237		-==== (% style="color:blue" %)**Battery Info**(%%) ====
	270	+=== 2.3.1 Battery Info ===
238	238
239	239
240		-Check the battery voltage for DS20L.
	273	+Check the battery voltage for LDS12-LB.
241	241
242	242	Ex1: 0x0B45 = 2885mV
243	243
...	...	@@ -244,7 +244,7 @@
244	244	Ex2: 0x0B49 = 2889mV
245	245
246	246
247		-==== (% style="color:blue" %)**DS18B20 Temperature sensor**(%%) ====
	280	+=== 2.3.2 DS18B20 Temperature sensor ===
248	248
249	249
250	250	This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
...	...	@@ -257,7 +257,7 @@
257	257	If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
258	258
259	259
260		-==== (% style="color:blue" %)**Distance**(%%) ====
	293	+=== 2.3.3 Distance ===
261	261
262	262
263	263	Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
...	...	@@ -268,7 +268,7 @@
268	268	If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
269	269
270	270
271		-==== (% style="color:blue" %)**Distance signal strength**(%%) ====
	304	+=== 2.3.4 Distance signal strength ===
272	272
273	273
274	274	Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
...	...	@@ -281,36 +281,21 @@
281	281	Customers can judge whether they need to adjust the environment based on the signal strength.
282	282
283	283
284		-**1) When the sensor detects valid data:**
	317	+=== 2.3.5 Interrupt Pin ===
285	285
286		-[[image:image-20230805155335-1.png||height="145" width="724"]]
287	287
	320	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H4.2A0SetInterruptMode"]] for the hardware and software set up.
288	288
289		-**2) When the sensor detects invalid data:**
	322	+Note: The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>||anchor="H1.6A0Pinmappingandpoweron"]].
290	290
291		-[[image:image-20230805155428-2.png||height="139" width="726"]]
292		-
293		-
294		-**3) When the sensor is not connected:**
295		-
296		-[[image:image-20230805155515-3.png||height="143" width="725"]]
297		-
298		-
299		-==== (% style="color:blue" %)**Interrupt Pin & Interrupt Level**(%%) ====
300		-
301		-
302		-This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
303		-
304		-Note: The Internet Pin is a separate pin in the screw terminal. See pin mapping of GPIO_EXTI .
305		-
306	306	**Example:**
307	307
308		-If byte[0]&0x01=0x00 : Normal uplink packet.
	326	+0x00: Normal uplink packet.
309	309
310		-If byte[0]&0x01=0x01 : Interrupt Uplink Packet.
	328	+0x01: Interrupt Uplink Packet.
311	311
312	312
313		-==== (% style="color:blue" %)**LiDAR temp**(%%) ====
	331	+=== 2.3.6 LiDAR temp ===
314	314
315	315
316	316	Characterize the internal temperature value of the sensor.
...	...	@@ -320,7 +320,7 @@
320	320	If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
321	321
322	322
323		-==== (% style="color:blue" %)**Message Type**(%%) ====
	341	+=== 2.3.7 Message Type ===
324	324
325	325
326	326	(((
...	...	@@ -333,115 +333,40 @@
333	333
334	334	(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
335	335	|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
336		-|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)Normal Uplink Payload
337		-|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)Configure Info Payload
	354	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3A0200BUplinkPayload"]]
	355	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H4.3A0GetFirmwareVersionInfo"]]
338	338
339		-[[image:image-20230805150315-4.png||height="233" width="723"]]
340	340
341	341
342		-=== 2.3.3 Historical measuring distance, FPORT~=3 ===
343	343
	360	+=== 2.3.8 Decode payload in The Things Network ===
344	344
345		-DS20L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
346	346
347		-The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
	363	+While using TTN network, you can add the payload format to decode the payload.
348	348
349		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
350		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
351		-**Size(bytes)**
352		-)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD; color: white; width: 85px;" %)**1**|=(% style="background-color: #4F81BD; color: white; width: 85px;" %)4
353		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)Interrupt flag & Interrupt_level|(% style="width:62.5px" %)(((
354		-Reserve(0xFF)
355		-)))|Distance|Distance signal strength|(% style="width:88px" %)(((
356		-LiDAR temp
357		-)))|(% style="width:85px" %)Unix TimeStamp
358	358
359		-**Interrupt flag & Interrupt level:**
	366	+[[image:1654592762713-715.png]]
360	360
361		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:480px" %)
362		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
363		-**Size(bit)**
364		-)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit7**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit6**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**[bit5:bit2]**|=(% style="width: 90px; background-color: #4F81BD; color: white;" %)**bit1**|=(% style="background-color: #4F81BD; color: white; width: 90px;" %)**bit0**
365		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)No ACK message|(% style="width:62.5px" %)Poll Message Flag|Reserve|(% style="width:91px" %)Interrupt level|(% style="width:88px" %)(((
366		-Interrupt flag
	368	+
	369	+(((
	370	+The payload decoder function for TTN is here:
367	367	)))
368	368
369		-* (((
370		-Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, DS20L will send max bytes according to the current DR and Frequency bands.
	373	+(((
	374	+LDS12-LB TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
371	371	)))
372	372
373		-For example, in the US915 band, the max payload for different DR is:
374	374
375		-**a) DR0:** max is 11 bytes so one entry of data
	378	+== 2.4 Uplink Interval ==
376	376
377		-**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
378	378
379		-**c) DR2:** total payload includes 11 entries of data
	381	+The LDS12-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
380	380
381		-**d) DR3:** total payload includes 22 entries of data.
382	382
383		-If DS20L doesn't have any data in the polling time. It will uplink 11 bytes of 0
	384	+== 2.5 ​Show Data in DataCake IoT Server ==
384	384
385	385
386		-**Downlink:**
387		-
388		-0x31 64 CC 68 0C 64 CC 69 74 05
389		-
390		-[[image:image-20230805144936-2.png||height="113" width="746"]]
391		-
392		-**Uplink:**
393		-
394		-43 FF 0E 10 00 B0 1E 64 CC 68 0C 40 FF 0D DE 00 A8 1E 64 CC 68 29 40 FF 09 92 00 D3 1E 64 CC 68 65 40 FF 02 3A 02 BC 1E 64 CC 68 A1 41 FF 0E 1A 00 A4 1E 64 CC 68 C0 40 FF 0D 2A 00 B8 1E 64 CC 68 E8 40 FF 00 C8 11 6A 1E 64 CC 69 24 40 FF 0E 24 00 AD 1E 64 CC 69 6D
395		-
396		-
397		-**Parsed Value:**
398		-
399		-[DISTANCE , DISTANCE_SIGNAL_STRENGTH，LIDAR_TEMP，EXTI_STATUS , EXTI_FLAG , TIME]
400		-
401		-
402		-[360,176,30,High,True,2023-08-04 02:53:00],
403		-
404		-[355,168,30,Low,False,2023-08-04 02:53:29],
405		-
406		-[245,211,30,Low,False,2023-08-04 02:54:29],
407		-
408		-[57,700,30,Low,False,2023-08-04 02:55:29],
409		-
410		-[361,164,30,Low,True,2023-08-04 02:56:00],
411		-
412		-[337,184,30,Low,False,2023-08-04 02:56:40],
413		-
414		-[20,4458,30,Low,False,2023-08-04 02:57:40],
415		-
416		-[362,173,30,Low,False,2023-08-04 02:58:53],
417		-
418		-
419		-**History read from serial port：**
420		-
421		-[[image:image-20230805145056-3.png]]
422		-
423		-
424		-=== 2.3.4 Decode payload in The Things Network ===
425		-
426		-
427		-While using TTN network, you can add the payload format to decode the payload.
428		-
429		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
430		-
431		-
432	432	(((
433		-The payload decoder function for TTN is here:
434		-)))
435		-
436		-(((
437		-DS20L TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
438		-)))
439		-
440		-
441		-== 2.4 ​Show Data in DataCake IoT Server ==
442		-
443		-
444		-(((
445	445	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
446	446	)))
447	447
...	...	@@ -463,7 +463,7 @@
463	463
464	464	(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
465	465
466		-(% style="color:blue" %)**Step 4**(%%)**: Search the DS20L and add DevEUI.**
	409	+(% style="color:blue" %)**Step 4**(%%)**: Search the LDS12-LB and add DevEUI.**
467	467
468	468	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
469	469
...	...	@@ -473,29 +473,34 @@
473	473	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
474	474
475	475
476		-== 2.5 Datalog Feature ==
	419	+== 2.6 Datalog Feature ==
477	477
478	478
479		-Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS20L will store the reading for future retrieving purposes.
	422	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LDS12-LB will store the reading for future retrieving purposes.
480	480
481	481
482		-=== 2.5.1 Ways to get datalog via LoRaWAN ===
	425	+=== 2.6.1 Ways to get datalog via LoRaWAN ===
483	483
484	484
485		-Set PNACKMD=1, DS20L will wait for ACK for every uplink, when there is no LoRaWAN network, DS20L will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
	428	+Set PNACKMD=1, LDS12-LB will wait for ACK for every uplink, when there is no LoRaWAN network,LDS12-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
486	486
487	487	* (((
488		-a) DS20L will do an ACK check for data records sending to make sure every data arrive server.
	431	+a) LDS12-LB will do an ACK check for data records sending to make sure every data arrive server.
489	489	)))
490	490	* (((
491		-b) DS20L will send data in **CONFIRMED Mode** when PNACKMD=1, but DS20L won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS20L gets a ACK, DS20L will consider there is a network connection and resend all NONE-ACK messages.
	434	+b) LDS12-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but LDS12-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if LDS12-LB gets a ACK, LDS12-LB will consider there is a network connection and resend all NONE-ACK messages.
492	492	)))
493	493
494		-=== 2.5.2 Unix TimeStamp ===
	437	+Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
495	495
	439	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
496	496
497		-DS20L uses Unix TimeStamp format based on
498	498
	442	+=== 2.6.2 Unix TimeStamp ===
	443	+
	444	+
	445	+LDS12-LB uses Unix TimeStamp format based on
	446	+
499	499	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
500	500
501	501	User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
...	...	@@ -508,23 +508,23 @@
508	508	So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
509	509
510	510
511		-=== 2.5.3 Set Device Time ===
	459	+=== 2.6.3 Set Device Time ===
512	512
513	513
514	514	User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
515	515
516		-Once DS20L Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS20L. If DS20L fails to get the time from the server, DS20L will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	464	+Once LDS12-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LDS12-LB. If LDS12-LB fails to get the time from the server, LDS12-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
517	517
518	518	(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
519	519
520	520
521		-=== 2.5.4 Poll sensor value ===
	469	+=== 2.6.4 Poll sensor value ===
522	522
523	523
524	524	Users can poll sensor values based on timestamps. Below is the downlink command.
525	525
526	526	(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
527		-|(% colspan="4" style="background-color:#4f81bd; color:white; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
	475	+|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
528	528	|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
529	529	|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
530	530
...	...	@@ -541,24 +541,112 @@
541	541	)))
542	542
543	543	(((
544		-Uplink Internal =5s，means DS20L will send one packet every 5s. range 5~~255s.
	492	+Uplink Internal =5s，means LDS12-LB will send one packet every 5s. range 5~~255s.
545	545	)))
546	546
547	547
548		-== 2.6 Frequency Plans ==
	496	+== 2.7 Frequency Plans ==
549	549
550	550
551		-The DS20L uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
	499	+The LDS12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
552	552
553	553	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
554	554
555	555
556		-3. Configure DS20L
	504	+== 2.8 LiDAR ToF Measurement ==
557	557
	506	+=== 2.8.1 Principle of Distance Measurement ===
	507	+
	508	+
	509	+The LiDAR probe is based on TOF, namely, Time of Flight principle. To be specific, the product emits modulation wave of near infrared ray on a periodic basis, which will be reflected after contacting object. The product obtains the time of flight by measuring round-trip phase difference and then calculates relative range between the product and the detection object, as shown below.
	510	+
	511	+
	512	+[[image:1654831757579-263.png]]
	513	+
	514	+
	515	+=== 2.8.2 Distance Measurement Characteristics ===
	516	+
	517	+
	518	+With optimization of light path and algorithm, The LiDAR probe has minimized influence from external environment on distance measurement performance. Despite that, the range of distance measurement may still be affected by the environment illumination intensity and the reflectivity of detection object. As shown in below:
	519	+
	520	+[[image:1654831774373-275.png]]
	521	+
	522	+
	523	+(((
	524	+(% style="color:blue" %)**① **(%%)Represents the detection blind zone of The LiDAR probe, 0-10cm, within which the output data is unreliable.
	525	+)))
	526	+
	527	+(((
	528	+(% style="color:blue" %)**② **(%%)Represents the operating range of The LiDAR probe detecting black target with 10% reflectivity, 0.1-5m.
	529	+)))
	530	+
	531	+(((
	532	+(% style="color:blue" %)**③ **(%%)Represents the operating range of The LiDAR probe detecting white target with 90% reflectivity, 0.1-12m.
	533	+)))
	534	+
	535	+
	536	+(((
	537	+Vertical Coordinates: Represents the radius of light spot for The LiDAR probe at different distances. The diameter of light spot depends on the FOV of The LiDAR probe (the term of FOV generally refers to the smaller value between the receiving angle and the transmitting angle), which is calculated as follows:
	538	+)))
	539	+
	540	+
	541	+[[image:1654831797521-720.png]]
	542	+
	543	+
	544	+(((
	545	+In the formula above, d is the diameter of light spot; D is detecting range; β is the value of the receiving angle of The LiDAR probe, 3.6°. Correspondence between the diameter of light spot and detecting range is given in Table below.
	546	+)))
	547	+
	548	+[[image:1654831810009-716.png]]
	549	+
	550	+
	551	+(((
	552	+If the light spot reaches two objects with different distances, as shown in Figure 3, the output distance value will be a value between the actual distance values of the two objects. For a high accuracy requirement in practice, the above situation should be noticed to avoid the measurement error.
	553	+)))
	554	+
	555	+
	556	+=== 2.8.3 Notice of usage: ===
	557	+
	558	+
	559	+Possible invalid /wrong reading for LiDAR ToF tech:
	560	+
	561	+* Measure high reflectivity object such as: Mirror, Smooth ceramic tile, static milk surface, will have possible wrong readings.
	562	+* While there is transparent object such as glass, water drop between the measured object and the LiDAR sensor, the reading might be wrong.
	563	+* The LiDAR probe is cover by dirty things; the reading might be wrong. In this case, need to clean the probe.
	564	+* The sensor window is made by Acrylic. Don't touch it with alcohol material. This will destroy the sensor window.
	565	+
	566	+=== 2.8.4  Reflectivity of different objects ===
	567	+
	568	+
	569	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:379px" %)
	570	+|=(% style="width: 54px;background-color:#D9E2F3;color:#0070C0" %)Item|=(% style="width: 231px;background-color:#D9E2F3;color:#0070C0" %)Material|=(% style="width: 94px;background-color:#D9E2F3;color:#0070C0" %)Relectivity
	571	+|(% style="width:53px" %)1|(% style="width:229px" %)Black foam rubber|(% style="width:93px" %)2.4%
	572	+|(% style="width:53px" %)2|(% style="width:229px" %)Black fabric|(% style="width:93px" %)3%
	573	+|(% style="width:53px" %)3|(% style="width:229px" %)Black rubber|(% style="width:93px" %)4%
	574	+|(% style="width:53px" %)4|(% style="width:229px" %)Coal (different types of coal)|(% style="width:93px" %)4~~8%
	575	+|(% style="width:53px" %)5|(% style="width:229px" %)Black car paint|(% style="width:93px" %)5%
	576	+|(% style="width:53px" %)6|(% style="width:229px" %)Black Jam|(% style="width:93px" %)10%
	577	+|(% style="width:53px" %)7|(% style="width:229px" %)Opaque black plastic|(% style="width:93px" %)14%
	578	+|(% style="width:53px" %)8|(% style="width:229px" %)Clean rough board|(% style="width:93px" %)20%
	579	+|(% style="width:53px" %)9|(% style="width:229px" %)Translucent plastic bottle|(% style="width:93px" %)62%
	580	+|(% style="width:53px" %)10|(% style="width:229px" %)Carton cardboard|(% style="width:93px" %)68%
	581	+|(% style="width:53px" %)11|(% style="width:229px" %)Clean pine|(% style="width:93px" %)70%
	582	+|(% style="width:53px" %)12|(% style="width:229px" %)Opaque white plastic|(% style="width:93px" %)87%
	583	+|(% style="width:53px" %)13|(% style="width:229px" %)White Jam|(% style="width:93px" %)90%
	584	+|(% style="width:53px" %)14|(% style="width:229px" %)Kodak Standard Whiteboard|(% style="width:93px" %)100%
	585	+|(% style="width:53px" %)15|(% style="width:229px" %)(((
	586	+Unpolished white metal surface
	587	+)))|(% style="width:93px" %)130%
	588	+|(% style="width:53px" %)16|(% style="width:229px" %)Glossy light metal surface|(% style="width:93px" %)150%
	589	+|(% style="width:53px" %)17|(% style="width:229px" %)stainless steel|(% style="width:93px" %)200%
	590	+|(% style="width:53px" %)18|(% style="width:229px" %)Reflector plate, reflective tape|(% style="width:93px" %)>300%
	591	+
	592	+= 3. Configure LDS12-LB =
	593	+
558	558	== 3.1 Configure Methods ==
559	559
560	560
561		-DS20L supports below configure method:
	597	+LDS12-LB supports below configure method:
562	562
563	563	* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
564	564
...	...	@@ -580,10 +580,10 @@
580	580	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
581	581
582	582
583		-== 3.3 Commands special design for DS20L ==
	619	+== 3.3 Commands special design for LDS12-LB ==
584	584
585	585
586		-These commands only valid for DS20L, as below:
	622	+These commands only valid for LDS12-LB, as below:
587	587
588	588
589	589	=== 3.3.1 Set Transmit Interval Time ===
...	...	@@ -598,7 +598,7 @@
598	598	)))
599	599
600	600	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
601		-|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
	637	+|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
602	602	|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
603	603	30000
604	604	OK
...	...	@@ -626,32 +626,25 @@
626	626	)))
627	627	* (((
628	628	Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
629		-
630		-
631		-
632	632	)))
633	633
634	634	=== 3.3.2 Set Interrupt Mode ===
635	635
636	636
637		-Feature, Set Interrupt mode for pin of GPIO_EXTI.
	670	+Feature, Set Interrupt mode for PA8 of pin.
638	638
639		-When AT+INTMOD=0 is set, GPIO_EXTI is used as a digital input port.
	672	+When AT+INTMOD=0 is set, PA8 is used as a digital input port.
640	640
641	641	(% style="color:blue" %)**AT Command: AT+INTMOD**
642	642
643	643	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
644		-|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
	677	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
645	645	|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
646	646	0
647	647	OK
648	648	the mode is 0 =Disable Interrupt
649	649	)))
650		-|(% style="width:154px" %)(((
651		-AT+INTMOD=2
652		-
653		-(default)
654		-)))|(% style="width:196px" %)(((
	683	+|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
655	655	Set Transmit Interval
656	656	0. (Disable Interrupt),
657	657	~1. (Trigger by rising and falling edge)
...	...	@@ -669,10 +669,91 @@
669	669
670	670	* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
671	671
	701	+
	702	+
	703	+=== 3.3.3 Get Firmware Version Info ===
	704	+
	705	+
	706	+Feature: use downlink to get firmware version.
	707	+
	708	+(% style="color:#037691" %)**Downlink Command: 0x26**
	709	+
	710	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:492px" %)
	711	+|(% style="background-color:#d9e2f3; color:#0070c0; width:191px" %)**Downlink Control Type**|(% style="background-color:#d9e2f3; color:#0070c0; width:57px" %)**FPort**|(% style="background-color:#d9e2f3; color:#0070c0; width:91px" %)**Type Code**|(% style="background-color:#d9e2f3; color:#0070c0; width:153px" %)**Downlink payload size(bytes)**
	712	+|(% style="width:191px" %)Get Firmware Version Info|(% style="width:57px" %)Any|(% style="width:91px" %)26|(% style="width:151px" %)2
	713	+
	714	+* Reply to the confirmation package: 26 01
	715	+* Reply to non-confirmed packet: 26 00
	716	+
	717	+Device will send an uplink after got this downlink command. With below payload:
	718	+
	719	+Configures info payload:
	720	+
	721	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
	722	+|=(% style="background-color:#D9E2F3;color:#0070C0" %)(((
	723	+**Size(bytes)**
	724	+)))|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**5**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
	725	+|**Value**|Software Type|(((
	726	+Frequency
	727	+Band
	728	+)))|Sub-band|(((
	729	+Firmware
	730	+Version
	731	+)))|Sensor Type|Reserve|(((
	732	+[[Message Type>>||anchor="H2.3.7A0MessageType"]]
	733	+Always 0x02
	734	+)))
	735	+
	736	+(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LLDS12
	737	+
	738	+(% style="color:#037691" %)**Frequency Band**:
	739	+
	740	+*0x01: EU868
	741	+
	742	+*0x02: US915
	743	+
	744	+*0x03: IN865
	745	+
	746	+*0x04: AU915
	747	+
	748	+*0x05: KZ865
	749	+
	750	+*0x06: RU864
	751	+
	752	+*0x07: AS923
	753	+
	754	+*0x08: AS923-1
	755	+
	756	+*0x09: AS923-2
	757	+
	758	+*0xa0: AS923-3
	759	+
	760	+
	761	+(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
	762	+
	763	+(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
	764	+
	765	+(% style="color:#037691" %)**Sensor Type**:
	766	+
	767	+0x01: LSE01
	768	+
	769	+0x02: LDDS75
	770	+
	771	+0x03: LDDS20
	772	+
	773	+0x04: LLMS01
	774	+
	775	+0x05: LSPH01
	776	+
	777	+0x06: LSNPK01
	778	+
	779	+0x07: LLDS12
	780	+
	781	+
672	672	= 4. Battery & Power Consumption =
673	673
674	674
675		-DS20L use built-in 2400mAh non-chargeable battery for long-term use up to several years*. See below link for detail information about the battery info and how to replace.
	785	+LDS12-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
676	676
677	677	[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
678	678
...	...	@@ -681,7 +681,7 @@
681	681
682	682
683	683	(% class="wikigeneratedid" %)
684		-User can change firmware DS20L to:
	794	+User can change firmware LDS12-LB to:
685	685
686	686	* Change Frequency band/ region.
687	687
...	...	@@ -689,7 +689,7 @@
689	689
690	690	* Fix bugs.
691	691
692		-Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zqv1vt3komgp4tu/AAC33PnXIcWOVl_UXBEAeT_xa?dl=0]]**
	802	+Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
693	693
694	694	Methods to Update Firmware:
695	695
...	...	@@ -699,10 +699,10 @@
699	699
700	700	= 6. FAQ =
701	701
702		-== 6.1 What is the frequency plan for DS20L? ==
	812	+== 6.1 What is the frequency plan for LDS12-LB? ==
703	703
704	704
705		-DS20L use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
	815	+LDS12-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
706	706
707	707
708	708	= 7. Trouble Shooting =
...	...	@@ -717,11 +717,11 @@
717	717
718	718
719	719	(((
720		-(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
	830	+(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance (such as glass and water, etc.)
721	721	)))
722	722
723	723	(((
724		-(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
	834	+Troubleshooting: Please avoid use of this product under such circumstance in practice.
725	725	)))
726	726
727	727
...	...	@@ -730,7 +730,7 @@
730	730	)))
731	731
732	732	(((
733		-(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
	843	+Troubleshooting: please use dry dust-free cloth to gently remove the foreign matter.
734	734	)))
735	735
736	736
...	...	@@ -737,7 +737,7 @@
737	737	= 8. Order Info =
738	738
739	739
740		-Part Number: (% style="color:blue" %)**DS20L-XXX**
	850	+Part Number: (% style="color:blue" %)**LDS12-LB-XXX**
741	741
742	742	(% style="color:red" %)**XXX**(%%): **The default frequency band**
743	743
...	...	@@ -762,7 +762,7 @@
762	762
763	763	(% style="color:#037691" %)**Package Includes**:
764	764
765		-* DS20L LoRaWAN Smart Distance Detector x 1
	875	+* LDS12-LB LoRaWAN LiDAR ToF Distance Sensor x 1
766	766
767	767	(% style="color:#037691" %)**Dimension and weight**:
768	768

image-20230615152941-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-87.9 KB

Content

image-20230615153004-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-87.9 KB

Content

image-20230805103904-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-46.9 KB

Content

image-20230805104104-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-46.3 KB

Content

image-20230805144259-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-872.7 KB

Content

image-20230805144936-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-37.5 KB

Content

image-20230805145056-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-30.7 KB

Content

image-20230805150315-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-90.6 KB

Content

image-20230805155335-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.4 KB

Content

image-20230805155428-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.5 KB

Content

image-20230805155515-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.7 KB

Content

image-20231110085300-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-613.3 KB

Content

image-20231110085342-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-178.7 KB

Content

image-20231110091447-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.4 KB

Content

image-20231110091506-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.4 KB

Content

image-20231110102635-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-84.7 KB

Content