Changes for page DS20L -- LoRaWAN Smart Distance Detector User Manual 01

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 19 removed)
  • image-20230614153353-1.png
  • image-20230614162334-2.png
  • image-20230614162359-3.png
  • image-20230615152941-1.png
  • image-20230615153004-2.png
  • image-20230805103904-1.png
  • image-20230805104104-2.png
  • image-20230805144259-1.png
  • image-20230805144936-2.png
  • image-20230805145056-3.png
  • image-20230805150315-4.png
  • image-20230805155335-1.png
  • image-20230805155428-2.png
  • image-20230805155515-3.png
  • image-20231110085300-1.png
  • image-20231110085342-2.png
  • image-20231110091447-3.png
  • image-20231110091506-4.png
  • image-20231110102635-5.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-DS20L -- LoRaWAN Smart Distance Detector User Manual
	1	+DDS20-LB -- LoRaWAN Ultrasonic Liquid Level Sensor User Manual

Content

...	...	@@ -1,5 +1,5 @@
1	1	(% style="text-align:center" %)
2		-[[image:image-20231110085342-2.png||height="481" width="481"]]
	2	+[[image:image-20230613133716-2.png||height="717" width="717"]]
3	3
4	4
5	5
...	...	@@ -19,429 +19,439 @@
19	19
20	20	= 1. Introduction =
21	21
22		-== 1.1 What is LoRaWAN Smart Distance Detector ==
	22	+== 1.1 What is LoRaWAN Ultrasonic liquid level Sensor ==
23	23
24	24
25		-The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN. DS20L can measure range between 3cm ~~ 200cm.
	25	+The Dragino DDS20-LB is a (% style="color:blue" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
26	26
27		-DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current
28		-consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
	27	+The DDS20-LB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation.
29	29
30		-DS20L has a (% style="color:blue" %)**built-in 2400mAh non-chargeable battery**(%%) for long-term use up to several years*. Users can also power DS20L with an external power source for (% style="color:blue" %)**continuous measuring and distance alarm / counting purposes.**
	29	+DDS20-LB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-LB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**(%%), (% style="color:blue" %)**strong acids**(%%), (% style="color:blue" %)**strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
31	31
32		-DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
	31	+The LoRa wireless technology used in DDS20-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33	33
	33	+DDS20-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34	34
35		-[[image:image-20231110102635-5.png||height="402" width="807"]]
	35	+DDS20-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36	36
	37	+Each DDS20-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37	37
	39	+[[image:image-20230613140115-3.png||height="453" width="800"]]
	40	+
	41	+
38	38	== 1.2 ​Features ==
39	39
40	40
41		-* LoRaWAN Class A protocol
42		-* LiDAR distance detector, range 3 ~~ 200cm
43		-* Periodically detect or continuously detect mode
	45	+* LoRaWAN 1.0.3 Class A
	46	+* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	47	+* Ultra-low power consumption
	48	+* Liquid Level Measurement by Ultrasonic technology
	49	+* Measure through container, No need to contact Liquid
	50	+* Valid level range 20mm - 2000mm
	51	+* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
	52	+* Cable Length : 25cm
	53	+* Support Bluetooth v5.1 and LoRaWAN remote configure
	54	+* Support wireless OTA update firmware
44	44	* AT Commands to change parameters
45		-* Remotely configure parameters via LoRaWAN Downlink
46		-* Alarm & Counting mode
47		-* Firmware upgradable via program port or LoRa protocol
48		-* Built-in 2400mAh battery or power by external power source
	56	+* Downlink to change configure
	57	+* IP66 Waterproof Enclosure
	58	+* 8500mAh Battery for long term use
49	49
50	50	== 1.3 Specification ==
51	51
52	52
53		-(% style="color:#037691" %)**LiDAR Sensor:**
	63	+(% style="color:#037691" %)**Common DC Characteristics:**
54	54
55		-* Operation Temperature: -40 ~~ 80 °C
56		-* Operation Humidity: 0~~99.9%RH (no Dew)
57		-* Storage Temperature: -10 ~~ 45°C
58		-* Measure Range: 3cm~~200cm @ 90% reflectivity
59		-* Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
60		-* ToF FoV: ±9°, Total 18°
61		-* Light source: VCSEL
	65	+* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
	66	+* Operating Temperature: -40 ~~ 85°C
62	62
63		-(% style="display:none" %)
	68	+(% style="color:#037691" %)**LoRa Spec:**
64	64
	70	+* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
	71	+* Max +22 dBm constant RF output vs.
	72	+* RX sensitivity: down to -139 dBm.
	73	+* Excellent blocking immunity
65	65
66		-== 1.4 Power Consumption ==
	75	+(% style="color:#037691" %)**Battery:**
67	67
	77	+* Li/SOCI2 un-chargeable battery
	78	+* Capacity: 8500mAh
	79	+* Self-Discharge: <1% / Year @ 25°C
	80	+* Max continuously current: 130mA
	81	+* Max boost current: 2A, 1 second
68	68
69		-(% style="color:#037691" %)**Battery Power Mode:**
	83	+(% style="color:#037691" %)**Power Consumption**
70	70
71		-* Idle: 0.003 mA @ 3.3v
72		-* Max : 360 mA
	85	+* Sleep Mode: 5uA @ 3.3v
	86	+* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
73	73
74		-(% style="color:#037691" %)**Continuously mode**:
	88	+== 1.4 Suitable Container & Liquid ==
75	75
76		-* Idle: 21 mA @ 3.3v
77		-* Max : 360 mA
78	78
	91	+* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
	92	+* Container shape is regular, and surface is smooth.
	93	+* Container Thickness:
	94	+** Pure metal material.  2~~8mm, best is 3~~5mm
	95	+** Pure non metal material: <10 mm
	96	+* Pure liquid without irregular deposition.(% style="display:none" %)
79	79
80	80
	99	+== 1.5 Install DDS20-LB ==
81	81
82		-= 2. Configure DS20L to connect to LoRaWAN network =
83	83
84		-== 2.1 How it works ==
	102	+(% style="color:blue" %)**Step 1**(%%):  Choose the installation point.
85	85
	104	+DDS20-LB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
86	86
87		-The DS20L is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS20L. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	106	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
88	88
89		-(% style="display:none" %) (%%)
90	90
91		-== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
	109	+(((
	110	+(% style="color:blue" %)**Step 2**(%%):  Polish the installation point.
	111	+)))
92	92
	113	+(((
	114	+For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
	115	+)))
93	93
94		-Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
	117	+[[image:image-20230613143052-5.png]]
95	95
96		-The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.(% style="display:none" %)
97	97
98		-[[image:image-20231110102635-5.png||height="402" width="807"]](% style="display:none" %)
	120	+No polish needed if the container is shine metal surface without paint or non-metal container.
99	99
100		-(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS20L.
	122	+[[image:image-20230613143125-6.png]]
101	101
102		-Each DS20L is shipped with a sticker with the default device EUI as below:
103	103
104		-[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
	125	+(((
	126	+(% style="color:blue" %)**Step3:   **(%%)Test the installation point.
	127	+)))
105	105
	129	+(((
	130	+Power on DDS20-LB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
	131	+)))
106	106
107		-You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
	133	+(((
	134	+It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-LB won't detect the liquid level.
	135	+)))
108	108
	137	+(((
	138	+After paste the DDS20-LB well, power on DDS20-LB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
	139	+)))
109	109
110		-(% style="color:blue" %)**Register the device**
111	111
112		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
	142	+(((
	143	+(% style="color:red" %)**LED Status:**
	144	+)))
113	113
	146	+* (((
	147	+Onboard LED: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
	148	+)))
114	114
115		-(% style="color:blue" %)**Add APP EUI and DEV EUI**
	150	+* (((
	151	+(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
	152	+)))
	153	+* (((
	154	+(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
	155	+)))
116	116
117		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
	157	+(((
	158	+LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
	159	+)))
118	118
119	119
120		-(% style="color:blue" %)**Add APP EUI in the application**
	162	+(((
	163	+(% style="color:red" %)**Note 2:**
	164	+)))
121	121
	166	+(((
	167	+(% style="color:red" %)**Ultrasonic coupling paste** (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
	168	+)))
122	122
123		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
124	124
	171	+(((
	172	+(% style="color:blue" %)**Step4:   **(%%)Install use Epoxy ab glue.
	173	+)))
125	125
126		-(% style="color:blue" %)**Add APP KEY**
	175	+(((
	176	+Prepare Eproxy AB glue.
	177	+)))
127	127
128		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
	179	+(((
	180	+Put Eproxy AB glue in the sensor and press it hard on the container installation point.
	181	+)))
129	129
	183	+(((
	184	+Reset DDS20-LB and see if the BLUE LED is slowly blinking.
	185	+)))
130	130
131		-(% style="color:blue" %)**Step 2:**(%%) Activate on DS20L
	187	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-8.png?width=341&height=203&rev=1.1||alt="image-20220615091045-8.png"]] [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-9.png?width=284&height=200&rev=1.1||alt="image-20220615091045-9.png"]]
132	132
133	133
134		-Press the button for 5 seconds to activate the DS20L.
	190	+(((
	191	+(% style="color:red" %)**Note 1:(%%) (% style="color:blue" %)Eproxy AB glue**(%%) needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
	192	+)))
135	135
136		-(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
	194	+(((
	195	+(% style="color:red" %)**Note 2:(%%) (% style="color:blue" %)Eproxy AB glue**(%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
	196	+)))
137	137
138		-After join success, it will start to upload messages to TTN and you can see the messages in the panel.
139	139
	199	+== 1.6 Applications ==
140	140
141		-== 2.3 ​Uplink Payload ==
142	142
143		-=== 2.3.1 Device Status, FPORT~=5 ===
	202	+* Smart liquid control solution.
144	144
	204	+* Smart liquefied gas solution.
145	145
146		-Users can use the downlink command(**0x26 01**) to ask DS20L to send device configure detail, include device configure status. DS20L will uplink a payload via FPort=5 to server.
147	147
148		-The Payload format is as below.
149	149
150		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
151		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
152		-**Size(bytes)**
153		-)))|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**1**|=(% style="width: 100px; background-color: #4F81BD;color:white;" %)**2**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 100px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 50px;" %)**2**
154		-|(% style="width:62.5px" %)Value|(% style="width:110px" %)Sensor Model|(% style="width:48px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:91px" %)Sub-band|(% style="width:60px" %)BAT
	208	+== 1.7 Precautions ==
155	155
156		-Example parse in TTNv3
157	157
158		-[[image:image-20230805103904-1.png||height="131" width="711"]]
	211	+* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
159	159
160		-(% style="color:blue" %)**Sensor Model**(%%): For DS20L, this value is 0x24
	213	+* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
161	161
162		-(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
	215	+* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.(% style="display:none" %)
163	163
164		-(% style="color:blue" %)**Frequency Band**:
165	165
166		-0x01: EU868
	218	+== 1.8 Sleep mode and working mode ==
167	167
168		-0x02: US915
169	169
170		-0x03: IN865
	221	+(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
171	171
172		-0x04: AU915
	223	+(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
173	173
174		-0x05: KZ865
175	175
176		-0x06: RU864
	226	+== 1.9 Button & LEDs ==
177	177
178		-0x07: AS923
179	179
180		-0x08: AS923-1
	229	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
181	181
182		-0x09: AS923-2
183	183
184		-0x0a: AS923-3
	232	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	233	+|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
	234	+|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
	235	+If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
	236	+Meanwhile, BLE module will be active and user can connect via BLE to configure device.
	237	+)))
	238	+|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
	239	+(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
	240	+(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
	241	+Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
	242	+)))
	243	+|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
185	185
186		-0x0b: CN470
	245	+== 1.10 BLE connection ==
187	187
188		-0x0c: EU433
189	189
190		-0x0d: KR920
	248	+DDS20-LB support BLE remote configure.
191	191
192		-0x0e: MA869
	250	+BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
193	193
194		-(% style="color:blue" %)**Sub-Band**:
	252	+* Press button to send an uplink
	253	+* Press button to active device.
	254	+* Device Power on or reset.
195	195
196		-AU915 and US915:value 0x00 ~~ 0x08
	256	+If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
197	197
198		-CN470: value 0x0B ~~ 0x0C
199	199
200		-Other Bands: Always 0x00
	259	+== 1.11 Pin Definitions ==
201	201
202		-(% style="color:blue" %)**Battery Info**:
	261	+[[image:image-20230523174230-1.png]]
203	203
204		-Check the battery voltage.
205	205
206		-Ex1: 0x0B45 = 2885mV
	264	+== 1.12 Mechanical ==
207	207
208		-Ex2: 0x0B49 = 2889mV
209	209
	267	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
210	210
211		-=== 2.3.2 Uplink Payload, FPORT~=2 ===
212	212
	270	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
213	213
214		-(((
215		-DS20L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS20L will:
216	216
217		-periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
	273	+[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
218	218
219		-Uplink Payload totals 11 bytes.
220		-)))
221	221
222		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
223		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
224		-**Size(bytes)**
225		-)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white; width: 80px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**|=(% style="background-color: #4F81BD;color:white; width: 70px;" %)**1**
226		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)[[BAT>>||anchor="HBatteryInfo"]]|(% style="width:62.5px" %)(((
227		-[[Temperature DS18B20>>||anchor="HDS18B20Temperaturesensor"]]
228		-)))|[[Distance>>||anchor="HDistance"]]|[[Distance signal strength>>||anchor="HDistancesignalstrength"]]|(% style="width:122px" %)(((
229		-[[Interrupt flag & Interrupt_level>>||anchor="HInterruptPin26A0InterruptLevel"]]
230		-)))|(% style="width:54px" %)[[LiDAR temp>>||anchor="HLiDARtemp"]]|(% style="width:96px" %)(((
231		-[[Message Type>>||anchor="HMessageType"]]
232		-)))
	276	+(% style="color:blue" %)**Probe Mechanical:**
233	233
234		-[[image:image-20230805104104-2.png||height="136" width="754"]]
	278	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
235	235
236	236
237		-==== (% style="color:blue" %)**Battery Info**(%%) ====
	281	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
238	238
239	239
240		-Check the battery voltage for DS20L.
	284	+= 2. Configure DDS20-LB to connect to LoRaWAN network =
241	241
242		-Ex1: 0x0B45 = 2885mV
	286	+== 2.1 How it works ==
243	243
244		-Ex2: 0x0B49 = 2889mV
245	245
	289	+The DDS20-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DDS20-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
246	246
247		-==== (% style="color:blue" %)**DS18B20 Temperature sensor**(%%) ====
	291	+(% style="display:none" %) (%%)
248	248
	293	+== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
249	249
250		-This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
251	251
	296	+Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
252	252
253		-**Example**:
	298	+The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
254	254
255		-If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
	300	+[[image:image-20230613140140-4.png||height="453" width="800"]](% style="display:none" %)
256	256
257		-If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
258	258
	303	+(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DDS20-LB.
259	259
260		-==== (% style="color:blue" %)**Distance**(%%) ====
	305	+Each DDS20-LB is shipped with a sticker with the default device EUI as below:
261	261
	307	+[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
262	262
263		-Represents the distance value of the measurement output, the default unit is cm, and the value range parsed as a decimal number is 0-1200. In actual use, when the signal strength value Strength.
264	264
	310	+You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
265	265
266		-**Example**:
267	267
268		-If the data you get from the register is 0x0B 0xEA, the distance between the sensor and the measured object is 0BEA(H) = 3050 (D)/10 = 305cm.
	313	+(% style="color:blue" %)**Register the device**
269	269
	315	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
270	270
271		-==== (% style="color:blue" %)**Distance signal strength**(%%) ====
272	272
	318	+(% style="color:blue" %)**Add APP EUI and DEV EUI**
273	273
274		-Refers to the signal strength, the default output value will be between 0-65535. When the distance measurement gear is fixed, the farther the distance measurement is, the lower the signal strength; the lower the target reflectivity, the lower the signal strength. When Strength is greater than 100 and not equal to 65535, the measured value of Dist is considered credible.
	320	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
275	275
276	276
277		-**Example**:
	323	+(% style="color:blue" %)**Add APP EUI in the application**
278	278
279		-If payload is: 01D7(H)=471(D), distance signal strength=471, 471>100,471≠65535, the measured value of Dist is considered credible.
280	280
281		-Customers can judge whether they need to adjust the environment based on the signal strength.
	326	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
282	282
283	283
284		-**1) When the sensor detects valid data:**
	329	+(% style="color:blue" %)**Add APP KEY**
285	285
286		-[[image:image-20230805155335-1.png||height="145" width="724"]]
	331	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
287	287
288	288
289		-**2) When the sensor detects invalid data:**
	334	+(% style="color:blue" %)**Step 2:**(%%) Activate on DDS20-LB
290	290
291		-[[image:image-20230805155428-2.png||height="139" width="726"]]
292	292
	337	+Press the button for 5 seconds to activate the DDS20-LB.
293	293
294		-**3) When the sensor is not connected:**
	339	+(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
295	295
296		-[[image:image-20230805155515-3.png||height="143" width="725"]]
	341	+After join success, it will start to upload messages to TTN and you can see the messages in the panel.
297	297
298	298
299		-==== (% style="color:blue" %)**Interrupt Pin & Interrupt Level**(%%) ====
	344	+== 2.3  ​Uplink Payload ==
300	300
301	301
302		-This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
	347	+(((
	348	+DDS20-LB will uplink payload via LoRaWAN with below payload format:
	349	+)))
303	303
304		-Note: The Internet Pin is a separate pin in the screw terminal. See pin mapping of GPIO_EXTI .
	351	+(((
	352	+Uplink payload includes in total 8 bytes.
	353	+)))
305	305
306		-**Example:**
	355	+(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
	356	+|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)(((
	357	+**Size(bytes)**
	358	+)))|=(% style="width: 62.5px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="background-color:#D9E2F3;color:#0070C0" %)1|=(% style="background-color:#D9E2F3;color:#0070C0" %)2|=(% style="background-color:#D9E2F3;color:#0070C0" %)**1**
	359	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
	360	+[[Distance>>||anchor="H2.3.2A0Distance"]]
	361	+(unit: mm)
	362	+)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
	363	+[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
	364	+)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
307	307
308		-If byte[0]&0x01=0x00 : Normal uplink packet.
	366	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850511545-399.png?rev=1.1||alt="1654850511545-399.png"]]
309	309
310		-If byte[0]&0x01=0x01 : Interrupt Uplink Packet.
311	311
	369	+=== 2.3.1  Battery Info ===
312	312
313		-==== (% style="color:blue" %)**LiDAR temp**(%%) ====
314	314
	372	+Check the battery voltage for DDS20-LB.
315	315
316		-Characterize the internal temperature value of the sensor.
	374	+Ex1: 0x0B45 = 2885mV
317	317
318		-**Example: **
319		-If payload is: 1C(H) <<24>>24=28(D),LiDAR temp=28℃.
320		-If payload is: F2(H) <<24>>24=-14(D),LiDAR temp=-14℃.
	376	+Ex2: 0x0B49 = 2889mV
321	321
322	322
323		-==== (% style="color:blue" %)**Message Type**(%%) ====
	379	+=== 2.3.2  Distance ===
324	324
325	325
326	326	(((
327		-For a normal uplink payload, the message type is always 0x01.
	383	+Get the distance. Flat object range 30mm - 4500mm.
328	328	)))
329	329
330	330	(((
331		-Valid Message Type:
332		-)))
	387	+For example, if the data you get from the register is **0x0B 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
333	333
334		-(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %)
335		-|=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload**
336		-|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)Normal Uplink Payload
337		-|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)Configure Info Payload
338		-
339		-[[image:image-20230805150315-4.png||height="233" width="723"]]
340		-
341		-
342		-=== 2.3.3 Historical measuring distance, FPORT~=3 ===
343		-
344		-
345		-DS20L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
346		-
347		-The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
348		-
349		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
350		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
351		-**Size(bytes)**
352		-)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD; color: white; width: 85px;" %)**1**|=(% style="background-color: #4F81BD; color: white; width: 85px;" %)4
353		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)Interrupt flag & Interrupt_level|(% style="width:62.5px" %)(((
354		-Reserve(0xFF)
355		-)))|Distance|Distance signal strength|(% style="width:88px" %)(((
356		-LiDAR temp
357		-)))|(% style="width:85px" %)Unix TimeStamp
358		-
359		-**Interrupt flag & Interrupt level:**
360		-
361		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:480px" %)
362		-|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
363		-**Size(bit)**
364		-)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit7**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**bit6**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**[bit5:bit2]**|=(% style="width: 90px; background-color: #4F81BD; color: white;" %)**bit1**|=(% style="background-color: #4F81BD; color: white; width: 90px;" %)**bit0**
365		-|(% style="width:62.5px" %)Value|(% style="width:62.5px" %)No ACK message|(% style="width:62.5px" %)Poll Message Flag|Reserve|(% style="width:91px" %)Interrupt level|(% style="width:88px" %)(((
366		-Interrupt flag
	389	+(% style="color:blue" %)**0B05(H) = 2821 (D) = 2821 mm.**
367	367	)))
368	368
369		-* (((
370		-Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, DS20L will send max bytes according to the current DR and Frequency bands.
371		-)))
	392	+* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
	393	+* If the sensor value lower than 0x001E (30mm), the sensor value will be 0x00.
372	372
373		-For example, in the US915 band, the max payload for different DR is:
	395	+=== 2.3.3  Interrupt Pin ===
374	374
375		-**a) DR0:** max is 11 bytes so one entry of data
376	376
377		-**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
	398	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
378	378
379		-**c) DR2:** total payload includes 11 entries of data
	400	+**Example:**
380	380
381		-**d) DR3:** total payload includes 22 entries of data.
	402	+0x00: Normal uplink packet.
382	382
383		-If DS20L doesn't have any data in the polling time. It will uplink 11 bytes of 0
	404	+0x01: Interrupt Uplink Packet.
384	384
385	385
386		-**Downlink:**
	407	+=== 2.3.4  DS18B20 Temperature sensor ===
387	387
388		-0x31 64 CC 68 0C 64 CC 69 74 05
389	389
390		-[[image:image-20230805144936-2.png||height="113" width="746"]]
	410	+This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
391	391
392		-**Uplink:**
	412	+**Example**:
393	393
394		-43 FF 0E 10 00 B0 1E 64 CC 68 0C 40 FF 0D DE 00 A8 1E 64 CC 68 29 40 FF 09 92 00 D3 1E 64 CC 68 65 40 FF 02 3A 02 BC 1E 64 CC 68 A1 41 FF 0E 1A 00 A4 1E 64 CC 68 C0 40 FF 0D 2A 00 B8 1E 64 CC 68 E8 40 FF 00 C8 11 6A 1E 64 CC 69 24 40 FF 0E 24 00 AD 1E 64 CC 69 6D
	414	+If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
395	395
	416	+If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
396	396
397		-**Parsed Value:**
398	398
399		-[DISTANCE , DISTANCE_SIGNAL_STRENGTH，LIDAR_TEMP，EXTI_STATUS , EXTI_FLAG , TIME]
	419	+=== 2.3.5  Sensor Flag ===
400	400
401	401
402		-[360,176,30,High,True,2023-08-04 02:53:00],
	422	+(((
	423	+0x01: Detect Ultrasonic Sensor
	424	+)))
403	403
404		-[355,168,30,Low,False,2023-08-04 02:53:29],
	426	+(((
	427	+0x00: No Ultrasonic Sensor
	428	+)))
405	405
406		-[245,211,30,Low,False,2023-08-04 02:54:29],
407	407
408		-[57,700,30,Low,False,2023-08-04 02:55:29],
	431	+=== 2.3.6  Decode payload in The Things Network ===
409	409
410		-[361,164,30,Low,True,2023-08-04 02:56:00],
411	411
412		-[337,184,30,Low,False,2023-08-04 02:56:40],
	434	+While using TTN network, you can add the payload format to decode the payload.
413	413
414		-[20,4458,30,Low,False,2023-08-04 02:57:40],
	436	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654850829385-439.png?rev=1.1||alt="1654850829385-439.png"]]
415	415
416		-[362,173,30,Low,False,2023-08-04 02:58:53],
	438	+The payload decoder function for TTN V3 is here:
417	417
	440	+(((
	441	+DDS20-LB TTN V3 Payload Decoder:  [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
	442	+)))
418	418
419		-**History read from serial port：**
420	420
421		-[[image:image-20230805145056-3.png]]
	445	+== 2.4  Uplink Interval ==
422	422
423	423
424		-=== 2.3.4 Decode payload in The Things Network ===
	448	+The DDS20-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>||anchor="H3.3.1SetTransmitIntervalTime"]]
425	425
426	426
427		-While using TTN network, you can add the payload format to decode the payload.
	451	+== 2.5  ​Show Data in DataCake IoT Server ==
428	428
429		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654592762713-715.png?rev=1.1||alt="1654592762713-715.png"]]
430	430
431		-
432	432	(((
433		-The payload decoder function for TTN is here:
434		-)))
435		-
436		-(((
437		-DS20L TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
438		-)))
439		-
440		-
441		-== 2.4 ​Show Data in DataCake IoT Server ==
442		-
443		-
444		-(((
445	445	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
446	446	)))
447	447
...	...	@@ -463,7 +463,7 @@
463	463
464	464	(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
465	465
466		-(% style="color:blue" %)**Step 4**(%%)**: Search the DS20L and add DevEUI.**
	476	+(% style="color:blue" %)**Step 4**(%%)**: Search the DDS20-LB and add DevEUI.**
467	467
468	468	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
469	469
...	...	@@ -473,29 +473,35 @@
473	473	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
474	474
475	475
476		-== 2.5 Datalog Feature ==
477	477
	487	+== 2.6 Datalog Feature ==
478	478
479		-Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS20L will store the reading for future retrieving purposes.
480	480
	490	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DDS20-LB will store the reading for future retrieving purposes.
481	481
482		-=== 2.5.1 Ways to get datalog via LoRaWAN ===
483	483
	493	+=== 2.6.1 Ways to get datalog via LoRaWAN ===
484	484
485		-Set PNACKMD=1, DS20L will wait for ACK for every uplink, when there is no LoRaWAN network, DS20L will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
486	486
	496	+Set PNACKMD=1, DDS20-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DDS20-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
	497	+
487	487	* (((
488		-a) DS20L will do an ACK check for data records sending to make sure every data arrive server.
	499	+a) DDS20-LB will do an ACK check for data records sending to make sure every data arrive server.
489	489	)))
490	490	* (((
491		-b) DS20L will send data in **CONFIRMED Mode** when PNACKMD=1, but DS20L won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS20L gets a ACK, DS20L will consider there is a network connection and resend all NONE-ACK messages.
	502	+b) DDS20-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DDS20-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DDS20-LB gets a ACK, DDS20-LB will consider there is a network connection and resend all NONE-ACK messages.
492	492	)))
493	493
494		-=== 2.5.2 Unix TimeStamp ===
	505	+Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
495	495
	507	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
496	496
497		-DS20L uses Unix TimeStamp format based on
498	498
	510	+=== 2.6.2 Unix TimeStamp ===
	511	+
	512	+
	513	+DDS20-LB uses Unix TimeStamp format based on
	514	+
499	499	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
500	500
501	501	User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
...	...	@@ -508,23 +508,23 @@
508	508	So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
509	509
510	510
511		-=== 2.5.3 Set Device Time ===
	527	+=== 2.6.3 Set Device Time ===
512	512
513	513
514	514	User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
515	515
516		-Once DS20L Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS20L. If DS20L fails to get the time from the server, DS20L will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
	532	+Once DDS20-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DDS20-LB. If DDS20-LB fails to get the time from the server, DDS20-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
517	517
518	518	(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
519	519
520	520
521		-=== 2.5.4 Poll sensor value ===
	537	+=== 2.6.4 Poll sensor value ===
522	522
523	523
524	524	Users can poll sensor values based on timestamps. Below is the downlink command.
525	525
526	526	(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
527		-|(% colspan="4" style="background-color:#4f81bd; color:white; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
	543	+|(% colspan="4" style="background-color:#d9e2f3; color:#0070c0; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
528	528	|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
529	529	|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
530	530
...	...	@@ -541,24 +541,24 @@
541	541	)))
542	542
543	543	(((
544		-Uplink Internal =5s，means DS20L will send one packet every 5s. range 5~~255s.
	560	+Uplink Internal =5s，means DDS20-LB will send one packet every 5s. range 5~~255s.
545	545	)))
546	546
547	547
548		-== 2.6 Frequency Plans ==
	564	+== 2.7 Frequency Plans ==
549	549
550	550
551		-The DS20L uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
	567	+The DDS20-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
552	552
553	553	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
554	554
555	555
556		-3. Configure DS20L
	572	+= 3. Configure DDS20-LB =
557	557
558	558	== 3.1 Configure Methods ==
559	559
560	560
561		-DS20L supports below configure method:
	577	+DDS20-LB supports below configure method:
562	562
563	563	* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
564	564
...	...	@@ -580,10 +580,10 @@
580	580	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
581	581
582	582
583		-== 3.3 Commands special design for DS20L ==
	599	+== 3.3 Commands special design for DDS20-LB ==
584	584
585	585
586		-These commands only valid for DS20L, as below:
	602	+These commands only valid for DDS20-LB, as below:
587	587
588	588
589	589	=== 3.3.1 Set Transmit Interval Time ===
...	...	@@ -598,7 +598,7 @@
598	598	)))
599	599
600	600	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
601		-|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
	617	+|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
602	602	|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
603	603	30000
604	604	OK
...	...	@@ -626,32 +626,25 @@
626	626	)))
627	627	* (((
628	628	Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
629		-
630		-
631		-
632	632	)))
633	633
634	634	=== 3.3.2 Set Interrupt Mode ===
635	635
636	636
637		-Feature, Set Interrupt mode for pin of GPIO_EXTI.
	650	+Feature, Set Interrupt mode for PA8 of pin.
638	638
639		-When AT+INTMOD=0 is set, GPIO_EXTI is used as a digital input port.
	652	+When AT+INTMOD=0 is set, PA8 is used as a digital input port.
640	640
641	641	(% style="color:blue" %)**AT Command: AT+INTMOD**
642	642
643	643	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
644		-|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
	657	+|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
645	645	|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
646	646	0
647	647	OK
648	648	the mode is 0 =Disable Interrupt
649	649	)))
650		-|(% style="width:154px" %)(((
651		-AT+INTMOD=2
652		-
653		-(default)
654		-)))|(% style="width:196px" %)(((
	663	+|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
655	655	Set Transmit Interval
656	656	0. (Disable Interrupt),
657	657	~1. (Trigger by rising and falling edge)
...	...	@@ -672,7 +672,7 @@
672	672	= 4. Battery & Power Consumption =
673	673
674	674
675		-DS20L use built-in 2400mAh non-chargeable battery for long-term use up to several years*. See below link for detail information about the battery info and how to replace.
	684	+DDS20-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
676	676
677	677	[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
678	678
...	...	@@ -681,7 +681,7 @@
681	681
682	682
683	683	(% class="wikigeneratedid" %)
684		-User can change firmware DS20L to:
	693	+User can change firmware DDS20-LB to:
685	685
686	686	* Change Frequency band/ region.
687	687
...	...	@@ -689,48 +689,49 @@
689	689
690	690	* Fix bugs.
691	691
692		-Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zqv1vt3komgp4tu/AAC33PnXIcWOVl_UXBEAeT_xa?dl=0]]**
	701	+Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/ph4uyz0rchflrnw/AADr1f_5Sg30804NItpfOQbla?dl=0]]**
693	693
694	694	Methods to Update Firmware:
695	695
696		-* (Recommanded way) OTA firmware update via wireless:  **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
	705	+* (Recommanded way) OTA firmware update via wireless:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
697	697
698	698	* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
699	699
700	700	= 6. FAQ =
701	701
702		-== 6.1 What is the frequency plan for DS20L? ==
	711	+== 6.1  What is the frequency plan for DDS20-LB? ==
703	703
704	704
705		-DS20L use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
	714	+DDS20-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
706	706
707	707
708		-= 7. Trouble Shooting =
	717	+== 6.2  Can I use DDS20-LB in condensation environment? ==
709	709
710		-== 7.1 AT Command input doesn't work ==
711	711
	720	+DDS20-LB is not suitable to be used in condensation environment. Condensation on the DDS20-LB probe will affect the reading and always got 0.
712	712
713		-In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
714	714
	723	+= 7.  Trouble Shooting =
715	715
716		-== 7.2 Significant error between the output distant value of LiDAR and actual distance ==
	725	+== 7.1  Why I can't join TTN V3 in US915 / AU915 bands? ==
717	717
718	718
719		-(((
720		-(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance. (such as glass and water, etc.)
721		-)))
	728	+It is due to channel mapping. Please see below link:  [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
722	722
723		-(((
724		-(% style="color:red" %)**Troubleshooting**(%%): Please avoid use of this product under such circumstance in practice.
725		-)))
726	726
	731	+== 7.2  AT Command input doesn't work ==
727	727
728		-(((
729		-(% style="color:blue" %)**Cause ②**(%%)**: **The IR-pass filters are blocked.
730		-)))
731	731
	734	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:blue" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:blue" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	735	+
	736	+
	737	+== 7.3  Why i always see 0x0000 or 0 for the distance value? ==
	738	+
	739	+
732	732	(((
733		-(% style="color:red" %)**Troubleshooting**(%%): please use dry dust-free cloth to gently remove the foreign matter.
	741	+LDDS20 has a strict [[**installation requirement**>>||anchor="H1.5A0InstallLDDS20"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.
	742	+
	743	+If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.
734	734	)))
735	735
736	736
...	...	@@ -737,7 +737,7 @@
737	737	= 8. Order Info =
738	738
739	739
740		-Part Number: (% style="color:blue" %)**DS20L-XXX**
	750	+Part Number: (% style="color:blue" %)**DDS20-LB-XXX**
741	741
742	742	(% style="color:red" %)**XXX**(%%): **The default frequency band**
743	743
...	...	@@ -757,12 +757,15 @@
757	757
758	758	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
759	759
	770	+
	771	+
	772	+
760	760	= 9. ​Packing Info =
761	761
762	762
763	763	(% style="color:#037691" %)**Package Includes**:
764	764
765		-* DS20L LoRaWAN Smart Distance Detector x 1
	778	+* DDS20-LB LoRaWAN Ultrasonic Liquid Level Sensor x 1
766	766
767	767	(% style="color:#037691" %)**Dimension and weight**:
768	768
...	...	@@ -774,6 +774,9 @@
774	774
775	775	* Weight / pcs : g
776	776
	790	+
	791	+
	792	+
777	777	= 10. Support =
778	778
779	779

image-20230614153353-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-112.1 KB

Content

image-20230614162334-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-88.3 KB

Content

image-20230614162359-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-88.3 KB

Content

image-20230615152941-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-87.9 KB

Content

image-20230615153004-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-87.9 KB

Content

image-20230805103904-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-46.9 KB

Content

image-20230805104104-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-46.3 KB

Content

image-20230805144259-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-872.7 KB

Content

image-20230805144936-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-37.5 KB

Content

image-20230805145056-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-30.7 KB

Content

image-20230805150315-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-90.6 KB

Content

image-20230805155335-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.4 KB

Content

image-20230805155428-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.5 KB

Content

image-20230805155515-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.7 KB

Content

image-20231110085300-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-613.3 KB

Content

image-20231110085342-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-178.7 KB

Content

image-20231110091447-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.4 KB

Content

image-20231110091506-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.4 KB

Content

image-20231110102635-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-84.7 KB

Content