Skip to Content
Last modified by Mengting Qiu on 2023/12/14 11:15
From version 113.4
edited by Xiaoling
on 2023/11/10 09:32
Change comment: There is no comment for this version
To version 118.3
edited by Xiaoling
on 2023/11/28 14:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -22,7 +22,7 @@
22 22  == 1.1 What is LoRaWAN Smart Distance Detector ==
23 23  
24 24  
25 -The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN.
25 +The Dragino (% style="color:blue" %)**DS20L is a smart distance detector**(%%) base on long-range wireless LoRaWAN technology. It uses (% style="color:blue" %)**LiDAR sensor**(%%) to detect the distance between DS20L and object, then DS20L will send the distance data to the IoT Platform via LoRaWAN. DS20L can measure range between 3cm ~~ 200cm.
26 26  
27 27  DS20L allows users to send data and reach extremely long ranges via LoRaWAN. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current 
28 28  consumption. It targets professional wireless sensor network applications such smart cities, building automation, and so on.
... ... @@ -31,9 +31,8 @@
31 31  
32 32  DS20L is fully compatible with (% style="color:blue" %)**LoRaWAN v1.0.3 Class A protocol**(%%), it can work with a standard LoRaWAN gateway.
33 33  
34 -DS20L supports (% style="color:blue" %)**Datalog feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
35 35  
36 -[[image:image-20231110091506-4.png||height="391" width="768"]]
35 +[[image:image-20231110102635-5.png||height="402" width="807"]]
37 37  
38 38  
39 39  == 1.2 ​Features ==
... ... @@ -45,7 +45,6 @@
45 45  * AT Commands to change parameters
46 46  * Remotely configure parameters via LoRaWAN Downlink
47 47  * Alarm & Counting mode
48 -* Datalog Feature
49 49  * Firmware upgradable via program port or LoRa protocol
50 50  * Built-in 2400mAh battery or power by external power source
51 51  
... ... @@ -52,121 +52,35 @@
52 52  == 1.3 Specification ==
53 53  
54 54  
55 -(% style="color:#037691" %)**Common DC Characteristics:**
53 +(% style="color:#037691" %)**LiDAR Sensor:**
56 56  
57 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
58 -* Operating Temperature: -40 ~~ 85°C
59 -
60 -(% style="color:#037691" %)**Probe Specification:**
61 -
55 +* Operation Temperature: -40 ~~ 80 °C
56 +* Operation Humidity: 0~~99.9%RH (no Dew)
57 +* Storage Temperature: -10 ~~ 45°C
62 62  * Measure Range: 3cm~~200cm @ 90% reflectivity
63 63  * Accuracy: ±2cm @ (3cm~~100cm); ±5% @ (100~~200cm)
64 64  * ToF FoV: ±9°, Total 18°
65 65  * Light source: VCSEL
66 66  
67 -(% style="color:#037691" %)**LoRa Spec:**
63 +== 1.4 Power Consumption ==
68 68  
69 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
70 -* Max +22 dBm constant RF output vs.
71 -* RX sensitivity: down to -139 dBm.
72 -* Excellent blocking immunity
73 73  
74 -(% style="color:#037691" %)**Battery:**
66 +(% style="color:#037691" %)**Battery Power Mode:**
75 75  
76 -* Li/SOCI2 un-chargeable battery
77 -* Capacity: 8500mAh
78 -* Self-Discharge: <1% / Year @ 25°C
79 -* Max continuously current: 130mA
80 -* Max boost current: 2A, 1 second
68 +* Idle: 0.003 mA @ 3.3v
69 +* Max : 360 mA
81 81  
82 -(% style="color:#037691" %)**Power Consumption**
71 +(% style="color:#037691" %)**Continuously mode**:
83 83  
84 -* Sleep Mode: 5uA @ 3.3v
85 -* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
73 +* Idle: 21 mA @ 3.3v
74 +* Max : 360 mA
86 86  
87 -== 1.4 Applications ==
76 += 2. Configure DS20L to connect to LoRaWAN network =
88 88  
89 -
90 -* Horizontal distance measurement
91 -* Parking management system
92 -* Object proximity and presence detection
93 -* Intelligent trash can management system
94 -* Robot obstacle avoidance
95 -* Automatic control
96 -* Sewer
97 -
98 -(% style="display:none" %)
99 -
100 -== 1.5 Sleep mode and working mode ==
101 -
102 -
103 -(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
104 -
105 -(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
106 -
107 -
108 -== 1.6 Button & LEDs ==
109 -
110 -
111 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
112 -
113 -
114 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
115 -|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 225px;background-color:#4F81BD;color:white" %)**Action**
116 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
117 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
118 -Meanwhile, BLE module will be active and user can connect via BLE to configure device.
119 -)))
120 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
121 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
122 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
123 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
124 -)))
125 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
126 -
127 -== 1.7 BLE connection ==
128 -
129 -
130 -LDS12-LB support BLE remote configure.
131 -
132 -BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
133 -
134 -* Press button to send an uplink
135 -* Press button to active device.
136 -* Device Power on or reset.
137 -
138 -If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
139 -
140 -
141 -== 1.8 Pin Definitions ==
142 -
143 -
144 -[[image:image-20230805144259-1.png||height="413" width="741"]]
145 -
146 -== 1.9 Mechanical ==
147 -
148 -
149 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
150 -
151 -
152 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
153 -
154 -
155 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
156 -
157 -
158 -(% style="color:blue" %)**Probe Mechanical:**
159 -
160 -
161 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654827224480-952.png?rev=1.1||alt="1654827224480-952.png"]]
162 -
163 -
164 -= 2. Configure LDS12-LB to connect to LoRaWAN network =
165 -
166 166  == 2.1 How it works ==
167 167  
168 168  
169 -The LDS12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the LDS12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
81 +The DS20L is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS20L. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
170 170  
171 171  (% style="display:none" %) (%%)
172 172  
... ... @@ -175,15 +175,14 @@
175 175  
176 176  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
177 177  
178 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
90 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.(% style="display:none" %)
179 179  
180 -[[image:image-20231110091447-3.png||height="383" width="752"]](% style="display:none" %)
92 +[[image:image-20231110102635-5.png||height="402" width="807"]](% style="display:none" %)
181 181  
94 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS20L.
182 182  
183 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from LDS12-LB.
96 +Each DS20L is shipped with a sticker with the default device EUI as below:
184 184  
185 -Each LDS12-LB is shipped with a sticker with the default device EUI as below:
186 -
187 187  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
188 188  
189 189  
... ... @@ -211,10 +211,11 @@
211 211  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
212 212  
213 213  
214 -(% style="color:blue" %)**Step 2:**(%%) Activate on LDS12-LB
125 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS20L
215 215  
127 +[[image:image-20231128133704-1.png||height="189" width="441"]]
216 216  
217 -Press the button for 5 seconds to activate the LDS12-LB.
129 +Press the button for 5 seconds to activate the DS20L.
218 218  
219 219  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
220 220  
... ... @@ -226,7 +226,7 @@
226 226  === 2.3.1 Device Status, FPORT~=5 ===
227 227  
228 228  
229 -Users can use the downlink command(**0x26 01**) to ask LDS12-LB to send device configure detail, include device configure status. LDS12-LB will uplink a payload via FPort=5 to server.
141 +Users can use the downlink command(**0x26 01**) to ask DS20L to send device configure detail, include device configure status. DS20L will uplink a payload via FPort=5 to server.
230 230  
231 231  The Payload format is as below.
232 232  
... ... @@ -238,9 +238,9 @@
238 238  
239 239  Example parse in TTNv3
240 240  
241 -[[image:image-20230805103904-1.png||height="131" width="711"]]
153 +[[image:1701149922873-259.png]]
242 242  
243 -(% style="color:blue" %)**Sensor Model**(%%): For LDS12-LB, this value is 0x24
155 +(% style="color:blue" %)**Sensor Model**(%%): For DS20L, this value is 0x21
244 244  
245 245  (% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
246 246  
... ... @@ -295,7 +295,7 @@
295 295  
296 296  
297 297  (((
298 -LDS12-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And LDS12-LB will:
210 +DS20L will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS20L will:
299 299  
300 300  periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
301 301  
... ... @@ -320,7 +320,7 @@
320 320  ==== (% style="color:blue" %)**Battery Info**(%%) ====
321 321  
322 322  
323 -Check the battery voltage for LDS12-LB.
235 +Check the battery voltage for DS20L.
324 324  
325 325  Ex1: 0x0B45 = 2885mV
326 326  
... ... @@ -384,7 +384,7 @@
384 384  
385 385  This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up.
386 386  
387 -Note: The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>||anchor="H1.8PinDefinitions"]] of GPIO_EXTI .
299 +Note: The Internet Pin is a separate pin in the screw terminal. See pin mapping of GPIO_EXTI .
388 388  
389 389  **Example:**
390 390  
... ... @@ -425,7 +425,7 @@
425 425  === 2.3.3 Historical measuring distance, FPORT~=3 ===
426 426  
427 427  
428 -LDS12-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
340 +DS20L stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5.4Pollsensorvalue"]].
429 429  
430 430  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time measuring distance.
431 431  
... ... @@ -450,7 +450,7 @@
450 450  )))
451 451  
452 452  * (((
453 -Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, LDS12-LB will send max bytes according to the current DR and Frequency bands.
365 +Each data entry is 11 bytes and has the same structure as [[Uplink Payload>>||anchor="H2.3.2UplinkPayload2CFPORT3D2"]], to save airtime and battery, DS20L will send max bytes according to the current DR and Frequency bands.
454 454  )))
455 455  
456 456  For example, in the US915 band, the max payload for different DR is:
... ... @@ -463,7 +463,7 @@
463 463  
464 464  **d) DR3:** total payload includes 22 entries of data.
465 465  
466 -If LDS12-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
378 +If DS20L doesn't have any data in the polling time. It will uplink 11 bytes of 0
467 467  
468 468  
469 469  **Downlink:**
... ... @@ -517,7 +517,7 @@
517 517  )))
518 518  
519 519  (((
520 -LDS12-LB TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
432 +DS20L TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
521 521  )))
522 522  
523 523  
... ... @@ -546,7 +546,7 @@
546 546  
547 547  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
548 548  
549 -(% style="color:blue" %)**Step 4**(%%)**: Search the LDS12-LB and add DevEUI.**
461 +(% style="color:blue" %)**Step 4**(%%)**: Search the DS20L and add DevEUI.**
550 550  
551 551  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654851029373-510.png?rev=1.1||alt="1654851029373-510.png"]]
552 552  
... ... @@ -556,181 +556,20 @@
556 556  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220610165129-11.png?width=1088&height=595&rev=1.1||alt="image-20220610165129-11.png"]]
557 557  
558 558  
559 -== 2.5 Datalog Feature ==
471 +== 2.5 Frequency Plans ==
560 560  
561 561  
562 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LDS12-LB will store the reading for future retrieving purposes.
474 +The DS20L uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
563 563  
564 -
565 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
566 -
567 -
568 -Set PNACKMD=1, LDS12-LB will wait for ACK for every uplink, when there is no LoRaWAN network,LDS12-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
569 -
570 -* (((
571 -a) LDS12-LB will do an ACK check for data records sending to make sure every data arrive server.
572 -)))
573 -* (((
574 -b) LDS12-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but LDS12-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if LDS12-LB gets a ACK, LDS12-LB will consider there is a network connection and resend all NONE-ACK messages.
575 -)))
576 -
577 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
578 -
579 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
580 -
581 -
582 -=== 2.5.2 Unix TimeStamp ===
583 -
584 -
585 -LDS12-LB uses Unix TimeStamp format based on
586 -
587 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
588 -
589 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
590 -
591 -Below is the converter example
592 -
593 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
594 -
595 -
596 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
597 -
598 -
599 -=== 2.5.3 Set Device Time ===
600 -
601 -
602 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
603 -
604 -Once LDS12-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LDS12-LB. If LDS12-LB fails to get the time from the server, LDS12-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
605 -
606 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
607 -
608 -
609 -=== 2.5.4 Poll sensor value ===
610 -
611 -
612 -Users can poll sensor values based on timestamps. Below is the downlink command.
613 -
614 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:425.818px" %)
615 -|(% colspan="4" style="background-color:#4f81bd; color:white; width:423px" %)**Downlink Command to poll Open/Close status (0x31)**
616 -|(% style="width:58px" %)**1byte**|(% style="width:127px" %)**4bytes**|(% style="width:124px" %)**4bytes**|(% style="width:114px" %)**1byte**
617 -|(% style="width:58px" %)31|(% style="width:127px" %)Timestamp start|(% style="width:124px" %)Timestamp end|(% style="width:114px" %)Uplink Interval
618 -
619 -(((
620 -Timestamp start and Timestamp end-use Unix TimeStamp format as mentioned above. Devices will reply with all data logs during this period, using the uplink interval.
621 -)))
622 -
623 -(((
624 -For example, downlink command [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/image-20220518162852-1.png?rev=1.1||alt="image-20220518162852-1.png"]]
625 -)))
626 -
627 -(((
628 -Is to check 2021/11/12 12:00:00 to 2021/11/12 15:00:00's data
629 -)))
630 -
631 -(((
632 -Uplink Internal =5s，means LDS12-LB will send one packet every 5s. range 5~~255s.
633 -)))
634 -
635 -
636 -== 2.6 Frequency Plans ==
637 -
638 -
639 -The LDS12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
640 -
641 641  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
642 642  
643 643  
644 -== 2.7 LiDAR ToF Measurement ==
479 += 3. Configure DS20L =
645 645  
646 -=== 2.7.1 Principle of Distance Measurement ===
647 -
648 -
649 -The LiDAR probe is based on TOF, namely, Time of Flight principle. To be specific, the product emits modulation wave of near infrared ray on a periodic basis, which will be reflected after contacting object. The product obtains the time of flight by measuring round-trip phase difference and then calculates relative range between the product and the detection object, as shown below.
650 -
651 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831757579-263.png?rev=1.1||alt="1654831757579-263.png"]]
652 -
653 -
654 -=== 2.7.2 Distance Measurement Characteristics ===
655 -
656 -
657 -With optimization of light path and algorithm, The LiDAR probe has minimized influence from external environment on distance measurement performance. Despite that, the range of distance measurement may still be affected by the environment illumination intensity and the reflectivity of detection object. As shown in below:
658 -
659 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831774373-275.png?rev=1.1||alt="1654831774373-275.png"]]
660 -
661 -
662 -(((
663 -(% style="color:blue" %)**① **(%%)Represents the detection blind zone of The LiDAR probe, 0-10cm, within which the output data is unreliable.
664 -)))
665 -
666 -(((
667 -(% style="color:blue" %)**② **(%%)Represents the operating range of The LiDAR probe detecting black target with 10% reflectivity, 0.1-5m.
668 -)))
669 -
670 -(((
671 -(% style="color:blue" %)**③ **(%%)Represents the operating range of The LiDAR probe detecting white target with 90% reflectivity, 0.1-12m.
672 -)))
673 -
674 -
675 -(((
676 -Vertical Coordinates: Represents the radius of light spot for The LiDAR probe at different distances. The diameter of light spot depends on the FOV of The LiDAR probe (the term of FOV generally refers to the smaller value between the receiving angle and the transmitting angle), which is calculated as follows:
677 -)))
678 -
679 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831797521-720.png?rev=1.1||alt="1654831797521-720.png"]]
680 -
681 -(((
682 -In the formula above, d is the diameter of light spot; D is detecting range; β is the value of the receiving angle of The LiDAR probe, 3.6°. Correspondence between the diameter of light spot and detecting range is given in Table below.
683 -)))
684 -
685 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLDS12-LoRaWAN%20LiDAR%20ToF%20Distance%20Sensor%20User%20Manual/WebHome/1654831810009-716.png?rev=1.1||alt="1654831810009-716.png"]]
686 -
687 -(((
688 -If the light spot reaches two objects with different distances, as shown in Figure 3, the output distance value will be a value between the actual distance values of the two objects. For a high accuracy requirement in practice, the above situation should be noticed to avoid the measurement error.
689 -)))
690 -
691 -
692 -=== 2.7.3 Notice of usage ===
693 -
694 -
695 -Possible invalid /wrong reading for LiDAR ToF tech:
696 -
697 -* Measure high reflectivity object such as: Mirror, Smooth ceramic tile, static milk surface, will have possible wrong readings.
698 -* While there is transparent object such as glass, water drop between the measured object and the LiDAR sensor, the reading might be wrong.
699 -* The LiDAR probe is cover by dirty things; the reading might be wrong. In this case, need to clean the probe.
700 -* The sensor window is made by Acrylic. Don't touch it with alcohol material. This will destroy the sensor window.
701 -
702 -=== 2.7.4  Reflectivity of different objects ===
703 -
704 -
705 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:379px" %)
706 -|=(% style="width: 54px;background-color:#4F81BD;color:white" %)Item|=(% style="width: 231px;background-color:#4F81BD;color:white" %)Material|=(% style="width: 94px;background-color:#4F81BD;color:white" %)Relectivity
707 -|(% style="width:53px" %)1|(% style="width:229px" %)Black foam rubber|(% style="width:93px" %)2.4%
708 -|(% style="width:53px" %)2|(% style="width:229px" %)Black fabric|(% style="width:93px" %)3%
709 -|(% style="width:53px" %)3|(% style="width:229px" %)Black rubber|(% style="width:93px" %)4%
710 -|(% style="width:53px" %)4|(% style="width:229px" %)Coal (different types of coal)|(% style="width:93px" %)4~~8%
711 -|(% style="width:53px" %)5|(% style="width:229px" %)Black car paint|(% style="width:93px" %)5%
712 -|(% style="width:53px" %)6|(% style="width:229px" %)Black Jam|(% style="width:93px" %)10%
713 -|(% style="width:53px" %)7|(% style="width:229px" %)Opaque black plastic|(% style="width:93px" %)14%
714 -|(% style="width:53px" %)8|(% style="width:229px" %)Clean rough board|(% style="width:93px" %)20%
715 -|(% style="width:53px" %)9|(% style="width:229px" %)Translucent plastic bottle|(% style="width:93px" %)62%
716 -|(% style="width:53px" %)10|(% style="width:229px" %)Carton cardboard|(% style="width:93px" %)68%
717 -|(% style="width:53px" %)11|(% style="width:229px" %)Clean pine|(% style="width:93px" %)70%
718 -|(% style="width:53px" %)12|(% style="width:229px" %)Opaque white plastic|(% style="width:93px" %)87%
719 -|(% style="width:53px" %)13|(% style="width:229px" %)White Jam|(% style="width:93px" %)90%
720 -|(% style="width:53px" %)14|(% style="width:229px" %)Kodak Standard Whiteboard|(% style="width:93px" %)100%
721 -|(% style="width:53px" %)15|(% style="width:229px" %)(((
722 -Unpolished white metal surface
723 -)))|(% style="width:93px" %)130%
724 -|(% style="width:53px" %)16|(% style="width:229px" %)Glossy light metal surface|(% style="width:93px" %)150%
725 -|(% style="width:53px" %)17|(% style="width:229px" %)stainless steel|(% style="width:93px" %)200%
726 -|(% style="width:53px" %)18|(% style="width:229px" %)Reflector plate, reflective tape|(% style="width:93px" %)>300%
727 -
728 -= 3. Configure LDS12-LB =
729 -
730 730  == 3.1 Configure Methods ==
731 731  
732 732  
733 -LDS12-LB supports below configure method:
484 +DS20L supports below configure method:
734 734  
735 735  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
736 736  
... ... @@ -752,10 +752,10 @@
752 752  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
753 753  
754 754  
755 -== 3.3 Commands special design for LDS12-LB ==
506 +== 3.3 Commands special design for DS20L ==
756 756  
757 757  
758 -These commands only valid for LDS12-LB, as below:
509 +These commands only valid for DS20L, as below:
759 759  
760 760  
761 761  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -797,12 +797,10 @@
797 797  Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
798 798  )))
799 799  * (((
800 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds 
801 -
802 -
803 -
551 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
804 804  )))
805 805  
554 +
806 806  === 3.3.2 Set Interrupt Mode ===
807 807  
808 808  
... ... @@ -820,7 +820,7 @@
820 820  the mode is 0 =Disable Interrupt
821 821  )))
822 822  |(% style="width:154px" %)(((
823 -AT+INTMOD=2
572 +AT+INTMOD=3
824 824  
825 825  (default)
826 826  )))|(% style="width:196px" %)(((
... ... @@ -841,39 +841,82 @@
841 841  
842 842  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
843 843  
844 -=== 3.3.3  Set Power Output Duration ===
845 845  
846 -Control the output duration 3V3(pin of VBAT_OUT) . Before each sampling, device will
847 847  
848 -~1. first enable the power output to external sensor,
595 +== 3.3.3 Set work mode ==
849 849  
850 -2. keep it on as per duration, read sensor value and construct uplink payload
851 851  
852 -3. final, close the power output.
598 +Feature: Switch working mode
853 853  
854 -(% style="color:blue" %)**AT Command: AT+3V3T**
600 +(% style="color:blue" %)**AT Command: AT+MOD**
855 855  
856 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
857 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
858 -|(% style="width:154px" %)AT+3V3T=?|(% style="width:196px" %)Show 3V3 open time.|(% style="width:157px" %)0 (default)
602 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:463px" %)
603 +|=(% style="width: 162px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 193px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 108px;background-color:#4F81BD;color:white" %)**Response**
604 +|(% style="width:162px" %)AT+MOD=?|(% style="width:191px" %)Get the current working mode.|(% style="width:106px" %)OK
605 +|(% style="width:162px" %)AT+MOD=1|(% style="width:191px" %)Set the working mode to Regular measurements.|(% style="width:106px" %)(((
859 859  OK
860 -|(% style="width:154px" %)AT+3V3T=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
861 -|(% style="width:154px" %)AT+3V3T=0|(% style="width:196px" %)Always turn on the power supply of 3V3 pin.|(% style="width:157px" %)OK
862 -|(% style="width:154px" %)AT+3V3T=65535|(% style="width:196px" %)Always turn off the power supply of 3V3 pin.|(% style="width:157px" %)OK
863 863  
864 -(% style="color:blue" %)**Downlink Command: 0x07**(%%)
865 -Format: Command Code (0x07) followed by 3 bytes.
608 +Attention:Take effect after ATZ
609 +)))
866 866  
867 -The first byte is 01,the second and third bytes are the time to turn on.
611 +(% style="color:blue" %)**Downlink Command:**
868 868  
869 -* Example 1: Downlink Payload: 07 01 00 00  **~-~-->**  AT+3V3T=0
870 -* Example 2: Downlink Payload: 07 01 01 F4  **~-~-->**  AT+3V3T=500
871 -* Example 3: Downlink Payload: 07 01 FF FF  **~-~-->**  AT+3V3T=65535
613 +* **Example: **0x0A00  ~/~/  Same as AT+MOD=0
872 872  
615 +* **Example:** 0x0A01  ~/~/  Same as AT+MOD=1
616 +
617 +
618 +=== 3.3.4 Set threshold and threshold mode ===
619 +
620 +
621 +Feature, Set threshold and threshold mode
622 +
623 +When **AT+DOL=0,0,0,0,400** is set, No threshold is used, the sampling time is 400ms.
624 +
625 +(% style="color:blue" %)**AT Command: AT+DOL**
626 +
627 +(% border="1" cellspacing="4" style="width:571.818px" %)
628 +|(% style="width:172px;background-color:#4F81BD;color:white" %)**Command Example**|(% style="width:279px;background-color:#4F81BD;color:white" %)**Function**|(% style="width:118px;background-color:#4F81BD;color:white" %)**Response**
629 +|(% style="width:172px" %)AT+ DOL =?|(% style="width:279px" %)Get the current threshold mode and sampling time|(% style="width:118px" %)(((
630 +0,0,0,0,400
631 +
632 +OK
633 +)))
634 +|(% style="width:172px" %)AT+ DOL =1,1800,100,0,400|(% style="width:279px" %)Set only the upper and lower thresholds|(% style="width:118px" %)OK
635 +
636 +
637 +(% border="1" cellspacing="4" style="width:668.818px" %)
638 +|(% rowspan="11" style="width:166px;background-color:#4F81BD;color:white" %)**AT+DOL=5,1800,0,0,400**|(% rowspan="6" style="width:226px" %)The first bit sets the limit mode|(% style="width:251px" %)0:Do not use upper and lower limits
639 +|(% style="width:251px" %)1:Use upper and lower limits
640 +|(% style="width:251px" %)2:Less than the lower limit
641 +|(% style="width:251px" %)3:Greater than the lower limit
642 +|(% style="width:251px" %)4:Less than the upper limit
643 +|(% style="width:251px" %)5: Greater than the upper limit
644 +|(% style="width:226px" %)The second bit sets the upper limit value|(% style="width:251px" %)3~~2000MM
645 +|(% style="width:226px" %)The third bit sets the lower limit value|(% style="width:251px" %)3~~2000MM
646 +|(% rowspan="2" style="width:226px" %)The fourth bit sets the over-limit alarm or person or object count.|(% style="width:251px" %)0 Over-limit alarm, DO output is high
647 +|(% style="width:251px" %)1 Person or object counting statistics
648 +|(% style="width:226px" %)The fifth bit sets the sampling time|(% style="width:251px" %)(((
649 +0~~10000ms
650 +
651 +
652 +)))
653 +
654 +(% style="color:blue" %)**Downlink Command: 0x07**
655 +
656 +Format: Command Code (0x07) followed by 9bytes.
657 +
658 +* Example 0: Downlink Payload: 070000000000000190  **~-~-->**  AT+MOD=0,0,0,0,400
659 +
660 +* Example 1: Downlink Payload: 070107080064000190  **~-~-->**  AT+MOD=1,1800,100,0,400
661 +
662 +
663 +
664 +
873 873  = 4. Battery & Power Consumption =
874 874  
875 875  
876 -LDS12-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
668 +DS20L use built-in 2400mAh non-chargeable battery for long-term use up to several years*. See below link for detail information about the battery info and how to replace.
877 877  
878 878  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
879 879  
... ... @@ -882,7 +882,7 @@
882 882  
883 883  
884 884  (% class="wikigeneratedid" %)
885 -User can change firmware LDS12-LB to:
677 +User can change firmware DS20L to:
886 886  
887 887  * Change Frequency band/ region.
888 888  
... ... @@ -890,7 +890,7 @@
890 890  
891 891  * Fix bugs.
892 892  
893 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/w1p7ukjrx49e62r/AAB3uCNCt-koYUvMkZUPBRSca?dl=0]]**
685 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zqv1vt3komgp4tu/AAC33PnXIcWOVl_UXBEAeT_xa?dl=0]]**
894 894  
895 895  Methods to Update Firmware:
896 896  
... ... @@ -900,10 +900,10 @@
900 900  
901 901  = 6. FAQ =
902 902  
903 -== 6.1 What is the frequency plan for LDS12-LB? ==
695 +== 6.1 What is the frequency plan for DS20L? ==
904 904  
905 905  
906 -LDS12-LB use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
698 +DS20L use the same frequency as other Dragino products. User can see the detail from this link:  [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]
907 907  
908 908  
909 909  = 7. Trouble Shooting =
... ... @@ -938,7 +938,7 @@
938 938  = 8. Order Info =
939 939  
940 940  
941 -Part Number: (% style="color:blue" %)**LDS12-LB-XXX**
733 +Part Number: (% style="color:blue" %)**DS20L-XXX**
942 942  
943 943  (% style="color:red" %)**XXX**(%%): **The default frequency band**
944 944  
... ... @@ -963,7 +963,7 @@
963 963  
964 964  (% style="color:#037691" %)**Package Includes**:
965 965  
966 -* LDS12-LB LoRaWAN LiDAR ToF Distance Sensor x 1
758 +* DS20L LoRaWAN Smart Distance Detector x 1
967 967  
968 968  (% style="color:#037691" %)**Dimension and weight**:
969 969  
1701149922873-259.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
image-20231110102635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +84.7 KB
Content
image-20231128133704-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.6 KB
Content